your child is prescribed amoxicillin (40mg/kg/day; not to exceed 1500 mg per 24 hour period) to be given 3 times per day. if she weighs 81 pounds, what is the maximum dose that she should receive?

For the triangle shown, the area is (1/2) * 5 * 4 = 10 square units. The largest possible area of a rectangle inscribed in a triangle is equal to the area of the triangle.

The area of the triangle can be calculated using the formula: Area = (1/2) * Base * Height.

Note that the rectangle must be completely within the triangle and all of its sides must be parallel to the sides of the triangle. To calculate the area, the base and height of the triangle must be known. The base is the length of any one side, while the height is the perpendicular distance from the base to the opposite vertex.

In this case, the triangle is 5 units along the base and 4 units in height. The area can then be calculated as (1/2) * 5 * 4 = 10 square units.

It is also important to note that the rectangle can have sides of different lengths and will still have an area of 10 square units.

To summarize, the largest possible area a rectangle inscribed in the triangle shown can have is 10 square units. This can be calculated using the formula (1/2) * Base * Height. The rectangle can have sides of different lengths, but the area will remain the same.

For more such questions on Area of rectangle inscribed in the triangle.

https://brainly.com/question/15995821#

#SPJ11

The linear expression that could be used to find the number of weeks until he reaches 30 subscriptions is given as follows:

A. 15 + 3x = 30.

The slope-intercept representation of a linear function is given by the equation presented as follows:

y = mx + b

The coefficients of the function and their meaning are described as follows:

The parameters for this problem are given as follows:

Hence the number of subscriptions after x weeks is given as follows:

y = 3x + 15.

The number of weeks to reach 30 subscriptions (y = 30) is given as follows:

3x + 15 = 30.

More can be learned about linear functions at https://brainly.com/question/24808124

#SPJ1

Answer:

4.03

Step-by-step explanation:

The largest area a farmer can fence in is 612.5 m².

The given question is based on finding the largest area a farmer can fence in for building a rectangular enclosure.

The farmer is given with 70 meters of fencing for fencing 3 sides of a rectangular enclosure.

The enclosure's fourth side is the wall of the farmer's barn.

To find the largest area fenced in, the farmer must try to use all 70 meters of fencing to enclose as large an area as possible.

First, let's assume that the rectangular enclosure's width is x.

So, we can find the length by dividing the remaining length of fencing after subtracting the width of the fence from the total length of fencing.

The remaining length of fencing is 70 - 2x.

After calculating the length, the area of the rectangular enclosure can be calculated by multiplying length and width.

The formula for calculating the area of the rectangle is A = l x w.

A = (70 - 2x)x

  = 70x - 2x²

To find the maximum area fenced in, differentiate A with respect to x and equate it to zero.

dA/dx = 70 - 4x

          =0x = 17.5 meters.

After finding x, the length of the enclosure can be calculated by subtracting the width from the total length of fencing.

l = 70 - 2x = 70 - 2(17.5) = 35 meters.

Therefore, the largest area fenced in will be A = l x

w = 35 x 17.5 = 612.5 m².

For similar question on area.

https://brainly.com/question/26870235

#SPJ11

Standard deviation and beta are both measures of risk, however Beta is used to measure systematic risk. The correct answer is option (B), beta measures only systematic risk.

Standard deviation and beta are both measures of risk, however, there are differences between them. Standard deviation is a measure of the variation or dispersion of a set of data values. It shows the average deviation of each value from the mean. It is expressed in the same units as the original data.

Beta, on the other hand, is a measure of the systematic risk of an investment relative to the market as a whole. It reflects the extent to which the return on a particular security or portfolio moves with the overall market, and is often used in the Capital Asset Pricing Model (CAPM) to estimate the required rate of return for an investment. It measures the sensitivity of the security's returns to the market.

The systematic risk of an investment is the risk that is associated with the market as a whole, rather than with a particular security. It is often referred to as market risk because it is based on factors that affect the entire market, such as changes in interest rates, inflation, or economic conditions.

Unsystematic risk, on the other hand, is the risk that is specific to a particular security or industry, and is caused by factors that affect that particular security or industry, such as management changes, lawsuits, or other events that affect the company's operations.

Learn more about 'Beta' here:

brainly.com/question/14271679

#SPJ11

Answer:

a. 9

b. 4

c. 4/9

Step-by-step explanation:

a. If we are picking 1 card out of 9, then there are 9 possible outcomes:

1, 2, 3, 4, 5, 6, 7, 8, or 9

This can also be represented as 9 choose 1 ([tex]_9C_1[/tex]).

b. We have to identify the number of prime numbers in the set:

2, 3, 5, 7

↑ 4 numbers

Note: Prime numbers can only be divided by themselves and 1 to result in a whole number.

c. We can represent the probability of selecting a prime number by dividing the number of prime numbers by the total number of numbers.

# of primes / # of numbers = 4 / 9

Answer:

x=2

Step-by-step explanation:

7x=14

divide by 7 on each side to get x by itself

x=14/7

x=2

The probability of the human Grandmaster winning one out of three games against the AI is approximately 0.243 or 24.3%.

Let's denote the probability of the human Grandmaster winning one game as p. Then the probability of the AI winning one game is 0.9, which means the probability of the human winning one game is 0.1. Since we want to calculate the probability of the human winning one game out of three, we can use the binomial distribution formula:

[tex]P(X=k) = (^n _k) \times p^k \times (1-p)^{(n-k)}[/tex]

Where:

P(X=k) is the probability of getting k successes in n trials

(n choose k) is the binomial coefficient, which is the number of ways to choose k successes from n trials

p is the probability of success in one trial

(1-p) is the probability of failure in one trial

k is the number of successes we are interested in (in this case, k=1)

n is the total number of trials (in this case, n=3)

Plugging in the values, we get:

P(X=1) = (3 choose 1) * 0.1^1 * 0.9^(3-1) = 3 * 0.1 * 0.81 = 0.243 or 24.3%

This means that there is a decent chance for the human to win at least one game, but it is still more likely for the AI to win all three games.

To know more about probability here

https://brainly.com/question/11234923

#SPJ4

The fourth term of the arithmetic progression is found to be 29.

A sequence is a collection of numbers that move from expression to term according to a specific pattern or rule.

You should be familiar with the following four main categories of sequences: arithmetic sequences, geometric sequence data, quadratic sequences, and special sequences.

The given equations are:

a1 = 5

an = 2[tex]a_{n - 1}[/tex]  + 3

put n = 1, 2 , 3...

Second term will be:

a2 = 2[tex]a_{2 - 1}[/tex]  + 3

a2 = 2[tex]a_{1}[/tex]  + 3

Put the value of a1 = 5

a2 = 2*5 + 3

a2 = 13

Now, the common difference d = 13 - 5 = 8

a4 = a1 + (n - 1)d

a4 = 5 + (4 - 1)*8

a4 = 5 + 3*8

a4 = 29

Thus, the fourth term of the arithmetic progression is found to be 29.

Know more about the arithmetic progression

https://brainly.com/question/6561461

#SPJ1

The given data comprises of a right triangle in which the base is denoted by x whose value is found to be 10.01.

It states that the ratio of the length of the side opposite to the angle to the length of the hypotenuse is equal to the sine of the angle.

The given data comprises of a right triangle in which the base is denoted by x and the perpendicular is 8. The angle formed between the base and hypotenuse is 53 degree.

To solve this problem, we can use the trigonometric identity of sine.

Mathematically, it can be expressed as:

sin 53° = Perpendicular/Hypotenuse

8/x = sin 53°

x = 8/sin 53°

x = 8/ 0.7986

x ≈ 10.01

Hence, the value of x is 10.01.

For more questions related to hypotenuse

https://brainly.com/question/28859589

#SPJ1

The GCF (Greatest Common Factor) of the variables of a polynomial has the least exponent of any variable term in the polynomial because it represents the largest factor that is common to all the terms in the polynomial.

To understand this better, consider a polynomial like 6x²y³ + 9x³y². The GCF of this polynomial would be 3x²y², which is the largest factor that can divide both terms evenly.

Notice that the exponent of each variable in the GCF is the smallest exponent among the corresponding variable terms in the polynomial.

This is because any factor that is common to all terms in the polynomial must be able to divide each term without leaving a remainder. Therefore, the exponent of each variable in the GCF must be less than or equal to the exponent of that variable in every term of the polynomial.

In summary, the GCF of the variables of a polynomial has the least exponent of any variable term in the polynomial because it represents the largest factor that can divide all terms in the polynomial evenly, and therefore, it must have the smallest exponent of each variable among all terms in the polynomial.

To know more about greatest common factor click on below link:

https://brainly.com/question/11221202#

#SPJ11

Answer:

a) The perimeter of a rectangle is given by the formula:

P = 2L + 2W

where P is the perimeter, L is the length, and W is the width. We are given that the width of the rectangle is 2x and the length is three times the width. So we can set up an equation that represents the given information:

P = 2L + 2W

168 = 2(3W) + 2W

168 = 8W

b) To solve for W, we can divide both sides of the equation by 8:

168/8 = W

21 = W

Therefore, the width of the rectangle is 21cm.

c) To find the length of the rectangle, we can use the expression that represents the length in terms of the width:

L = 3W

L = 3(21)

L = 63

Therefore, the length of the rectangle is 63cm.

The width and length of the rectangle are 21cm and 63cm, respectively.

Answer:

a two-dimension surface formed by two number lines.

Answer:

To solve for m, we need to isolate the variable by performing the same operation to both sides of the equation.

Dividing both sides of the equation by 6 will give us:

6m/6 = 33/6

Simplifying:

m = 5.5

Therefore, the solution to the equation 6m = 33 is m = 5.5.

To solve for p, we need to isolate the variable by performing the same operation to both sides of the equation.

Subtracting 7.04 from both sides of the equation will give us:

p + 7.04 - 7.04 = 11.8 - 7.04

Simplifying:

p = 4.76

Therefore, the solution to the equation p + 7.04 = 11.8 is p = 4.76.

To solve for n, we need to isolate the variable by performing the same operation to both sides of the equation.

First, we need to simplify both sides of the equation by finding a common denominator for the fractions:

n + (3/5) = 8/10 can be written as:

n + (3/5) = (4/5)

Next, we can subtract (3/5) from both sides of the equation:

n + (3/5) - (3/5) = (4/5) - (3/5)

Simplifying:

n = 1/5

Therefore, the solution to the equation n + (3/5) = (8/10) is n = 1/5.

These are your answers for questions 1-3.

7 is the value of mixed fraction.

What exactly is a mixed fraction?

A mixed fraction is one that is represented by both its remainder and quotient. Two is the quotient and one is the remainder in the mixed fraction 2/3, for instance. Hence, a mixed fraction is created by combining a whole number and a proper fraction. A mixed number is one that includes both a whole number and a legal fraction.

 = 6  30/44

 = 294/44

 = 6.6818

 = 7   ( round off )

Learn more about mixed fraction

brainly.com/question/29264210

#SPJ1

An ASTM grain size of 8 means that there are 8 grains per square inch at a magnification of 100. Without any magnification, it is not possible to determine the number of grains per square inch.

ASTM grain size is a measure of the size of the grains in a metal sample. The ASTM E112 defines the grain size number as the number of grains per square inch of metal surface area at a magnification of 100 times. So, an ASTM grain size of 8 means that there are 8 grains per square inch at a magnification of 100.

Without any magnification, it is not possible to determine the number of grains per square inch as the grains are too small to be visible to the  eye. However, the ASTM grain size number can still provide information about the grain size distribution in the metal sample.

A metal sample with a smaller grain size number (i.e., larger grain size) will have fewer grains per square inch at a magnification of 100 than a metal sample with a larger grain size number (i.e., smaller grain size). This is because larger grains take up more surface area than smaller grains, resulting in fewer grains per unit area.

To learn more about magnification click on,

https://brainly.com/question/30896449

#SPJ4

382 students

To estimate the mean change in SAT scores to within 2 points with 95% confidence, you would need a sample of at least 382 high school students. This is because the margin of error (2 points) must be smaller than the standard deviation (50 points). Thus, we use the formula margin of error = (z-score) x (standard deviation/√n), where n is the sample size, to calculate the required sample size. Solving for n yields 382 students.

Learn more about standard deviation

brainly.com/question/23907081

#SPJ11

The total amount of money shared between Rui Feng and Vishal is 154 dollars.

Let's assume that the amount of money shared between Rui Feng and Vishal is x dollars.

According to the given ratio, the amount of money received by Rui Feng is 5/14 of the total amount, and the amount received by Vishal is 9/14 of the total amount.

We are also given that Rui Feng receives 44 dollars less than Vishal. We can express this as:

9/14 x - 5/14 x = 44

Simplifying the equation, we get:

4/14 x = 44

Multiplying both sides by 14/4, we get:

x = 154

Learn more about ratio here https://brainly.com/question/13419413

#SPJ4

There are 3876 ways in which Patricia can choose 4 pizza toppings from a menu of 19 toppings if each topping can only be chosen once. In permutation, the order is very important, and it is denoted by "P." which means that each item can only appear once in the lineup, and there are no duplicates. The formula for permutation is given as: P(n, r) = n!/(n-r)!

What is combination?In a combination, the order is not essential, and it is denoted by "C." It means that things can be jumbled up, and there are no duplicates. The formula for a combination is given as: C(n, r) = n! / (r! * (n-r)!)How to calculate the number of ways to choose 4 pizza toppings from a menu of 19 toppings?

To calculate the number of ways to choose 4 pizza toppings from a menu of 19 toppings, we need to use the combination formula, which is: C(n, r) = n! / (r! * (n-r)!)Here, n = 19 and r = 4, so the formula becomes: C(19,4) = 19!/(4!(19-4)!) = 19!/(4!15!) = (19*18*17*16)/(4*3*2*1) = 38,76. Therefore, there are 3876 ways in which Patricia can choose 4 pizza toppings from a menu of 19 toppings if each topping can only be chosen once.

To know more about permutation click here

brainly.com/question/30649574

#SPJ11

We know that no matter how the two dice are biased, the numbers 2, 7, and 12 cannot be equally likely values for the sum. In particular, the sum cannot be uniformly distributed on the numbers from 2 to 12.

Explanation:

When we roll a fair die (i.e. an unbiased die), the probabilities of getting any one of the six possible numbers {1, 2, 3, 4, 5, 6} are equal to 1/6 each. But, when we use a biased die, the probabilities of getting any of the six possible numbers will no longer be equal. Some numbers will be more likely to occur, while others will be less likely to occur

For example:

if one of the dice has a weight in such a way that it always rolls a 6, then the probability of getting a sum of 2 will be zero, the probability of getting a sum of 7 will be 1/6, and the probability of getting a sum of 12 will be zero.However, if the dice are biased in some other way, we can still get non-zero probabilities for the sums of 2, 7, and 12. But, the probability of getting those three sums will not be the same. For instance, if one die is biased to always roll a 1, and the other die is biased to always roll a 6, then the probabilities of getting each of the sums 2, 7, and 12 are as follows:

P(2) = P(1, 1) = (1/6)² = 1/36

P(7) = P(1, 6) + P(6, 1) + P(2, 5) + P(5, 2) + P(3, 4) + P(4, 3) = 6(1/6)(1/6) = 1/6P(1

2) = P(6, 6) = (1/6)² = 1/36

So, the probability of getting a sum of 7 is six times as likely as getting a sum of 2 or 12. Therefore, the sum cannot be uniformly distributed on the numbers from 2 to 12.

To know more about probability:

https://brainly.com/question/30034780

#SPJ11

The linear correlation coefficient of 0.3 indicates a moderate positive correlation between the two variables.

This suggests that when one variable increases, the other variable tends to increase too. However, there is not a strong linear relationship between the two variables, meaning that the increase in one variable does not guarantee a predictable change in the other variable.


When interpreting the findings of a correlation study, it is important to note the strength of the relationship between the two variables. A linear correlation coefficient of 0.3 indicates a moderate positive correlation, meaning that the two variables increase together but there is not a strong linear relationship between the two variables.

This means that the increase in one variable does not guarantee a predictable change in the other variable. To put it another way, the strength of the correlation means that when one variable increases, it is likely that the other will increase as well, but it is not guaranteed.

Therefore, caution should be used when making predictions based on the results of a correlation study.

To know more about linear correlation coefficient click on below link:

https://brainly.com/question/24881420#

#SPJ11

The null and alternative hypotheses for the manufacturer of banana chips can be defined as:

H0: µ = 409 (Null Hypothesis)

Ha: µ < 409 (Alternative Hypothesis)

A manufacturer of banana chips would like to know whether its bag filling machine works correctly at the 409.0 409.0 gram setting. It is believed that the machine is underfilling the bags. A 38 bag sample had a mean of 406.0 grams. A level of significance of 0.05 will be used. State the hypotheses. Assume the variance is known to be 400.00. Enter the hypotheses.

The null and alternative hypotheses for the manufacturer of banana chips can be defined as:

H0: µ = 409 (Null Hypothesis)

Ha: µ < 409 (Alternative Hypothesis)

Where µ is the population mean of the weight of banana chips in a bag. The level of significance is 0.05. As the population variance is known, the z-test can be performed. To test the above hypotheses, we can calculate the test statistics as shown below :

z = (X - µ) / [σ / √(n)]

Where, X = Sample mean = 406, Population mean = 409, Population standard deviation = 20 (Square root of variance = √400) , Sample size = 38 substituting the given values, we get

= (406 - 409) / [20 / √(38)]z = -1.581

According to the z-distribution table, the probability of getting a value less than or equal to -1.581 is 0.0562. It means the p-value is 0.0562. Since the p-value (0.0562) > α (0.05), we fail to reject the null hypothesis H0.

Therefore, there is not enough statistical evidence to conclude that the bag filling machine is underfilling the bags at the 409-gram setting. Thus, the given statement is false.

To learn more about hypothesis test refer :

https://brainly.com/question/17099835

#SPJ11

Answer: 75 [tex]m^{2}[/tex]

Step-by-step explanation:

5*5 + 5*10 = 25 + 50 = 75

please mark brainliest

Answer:

Let's represent the amount invested at 10% as x and the amount invested at 6% as y. Then we can set up a system of two equations to represent the given information:

x + y = 20,000 (since the total amount invested is 20,000)

0.10x + 0.06y = 1,470 (since the interest earned is 1,470 and the interest rate at which x is invested is 10% and the interest rate at which y is invested is 6%)

We can use the first equation to solve for one of the variables in terms of the other:

x = 20,000 - y

Now we can substitute this expression for x into the second equation and solve for y:

0.10(20,000 - y) + 0.06y = 1,470

2,000 - 0.10y + 0.06y = 1,470

-0.04y = -530

y = 13,250

So $13,250 was invested at 6%. We can find the amount invested at 10% by plugging in this value of y into the first equation:

x + 13,250 = 20,000

x = 6,750

So $6,750 was invested at 10%.

All the trigonometric values for sin θ, cos θ and tan θ are valued below. Each trigonometric value is mentioned.

sin θ has boundaries from 0 to 1.

sin [tex]-\pi /2[/tex] = -1

sin  [tex]-\pi /3[/tex] = -0.87

sin [tex]-\pi /6[/tex] = -0.5

sin 0 = 0

sin [tex]\pi /6 \\[/tex] = 0.5

sin [tex]\pi /3[/tex] = 0.87

sin [tex]\pi /2[/tex] = 1

sin [tex]2\pi /3[/tex] = [tex]\sqrt{3}/2[/tex]

sin [tex]5\pi /6[/tex] = 1/2

sin [tex]\pi[/tex] = 1

sin [tex]7\pi /6[/tex] = -0.5

sin [tex]4\pi /3[/tex] = -0.87

sin [tex]3\pi /2[/tex] = -1

sin  [tex]5\pi /3[/tex] = -0.87

sin [tex]11\pi /6[/tex] = -0.5

sin [tex]2\pi[/tex] = 0

Similarly cos θ has boundaries.

cos [tex]-\pi /2[/tex] = 0

cos  [tex]-\pi /3[/tex] = 0.5

cos [tex]-\pi /6[/tex] = 0.87

cos 0 = 1

cos [tex]\pi /6 \\[/tex] = 0.87

cos [tex]\pi /3[/tex] = 0.5

cos [tex]\pi /2[/tex] = 0

cos [tex]2\pi /3[/tex] = -0.5

cos [tex]5\pi /6[/tex] = -0.87

cos [tex]\pi[/tex] = -1

cos [tex]7\pi /6[/tex] = -0.87

cos [tex]4\pi /3[/tex] = -0.5

cos [tex]3\pi /2[/tex] = 0

cos  [tex]5\pi /3[/tex] = 0.5

cos [tex]11\pi /6[/tex] = 0.87

cos [tex]2\pi[/tex] = 1

But tan θ has no boundaries.

tan [tex]-\pi /2[/tex] = undefined

tan[tex]-\pi /3[/tex] = -0.8

tan [tex]-\pi /6[/tex] = -1.73

tan 0 = 0

tan[tex]\pi /6 \\[/tex] = [tex]\frac{1}{\sqrt{3} }[/tex]

tan [tex]\pi /3[/tex] = [tex]\sqrt{3}[/tex]

tan [tex]\pi /2[/tex] = undefined

tan [tex]2\pi /3[/tex] = -3

tan [tex]5\pi /6[/tex] = -0.5774

tan [tex]\pi[/tex] = undefined

tan [tex]7\pi /6[/tex] = -1.73

tan[tex]4\pi /3[/tex] = 1.73

tan [tex]3\pi /2[/tex] = undefined

tan [tex]5\pi /3[/tex] = -1.73

tan [tex]11\pi /6[/tex] = -0.58

tan [tex]2\pi[/tex] = 0

Hence, all the values mentioned in the table, were written above.

Learn more about Trigonometric values:

https://brainly.com/question/29069676

#SPJ1

Penny Banks made a 25% down payment, which means she paid 75% of the total cost through financing.

The amount she paid as a down payment is:

25% of $1,526.39 = 0.25 x $1,526.39 = $381.60

So the amount she financed is:

$1,526.39 - $381.60 = $1,144.79

Therefore, Penny Banks financed $1,144.79.

Answer:

58.8 gallons

Step-by-step explanation:

let x be the charge for an oil change, and let the tax on x be 7% so that the actual charge is 1.07x. let y be the number of containers of oil that are needed, and $2 the price per container. then 2y is the price of the oil itself. the cov(x,y) is 5.6.

The covariance of 1.07x and 2y is 11.984

Covariance refers to the way two variables shift together. It is a measurement that evaluates how close two variables are to one another. It examines whether they change in the same direction (positive covariance) or in the opposite direction (negative covariance)

.Calculating Covariance:

Given that Cov(X,Y) = 5.6

we need to find Cov(1.07X,2Y)Hence,

Cov(1.07X,2Y) = 2 * 1.07 * Cov(X,Y) = 2.2996 * 5.6 = 11.984

Therefore, the covariance of 1.07x and 2y is 11.984.

Hence option (a) is the correct answer.

To know more about covariance:

https://brainly.com/question/14300312

#SPJ11

Step-by-step explanation:

Lets use A for area, W for width, and H for height (sorry in advance for bad handwriting, I am writing using a mouse)

Since area is equal to width times height, lets make an equation given what we already know.

A = W * H

Now lets use the given parameters to create a proper area equation, partially answering the question.

A = (H*1.5) * H, H*1.5 being the width

Now we have the frames to add to this equation

Since these frames are 1 inch thick, this adds one inch to the width and the height.

You use order of operations to assume that we are calculating this by multiplying the height by 1.5 first, then adding the one inch to the width and height.

So our final equation is:

A = ((h*1.5)+1) * (h+1)

Lets give some example values

Height is 6, width is 6*1.5, meaning width is 9

After, we add one to the height and the width, meaning the height is 7 and the width is 10.

Lets multiply these together, and the total square area is 70 inches squared.

The distance from one corner to the other corner diagonally across the soccer field is 169.7 meters.

To calculate this, use the Pythagorean theorem, which states that [tex]a^2 + b^2 = c^2[/tex], where a and b are the two sides of a right triangle, and c is the hypotenuse, or the longest side.

In this problem, a is 90 meters, b is 120 meters, and c is the distance from one corner to the other diagonally across the field.

So, [tex]90^2 + 120^2 = c^2[/tex]. To solve this, take the square root of both sides, and c = 169.7 meters.

To round this answer to the nearest tenth, we need to round it to 169.7 meters.

This question can be used to demonstrate the importance of knowing the Pythagorean theorem, which can be used to calculate the distance of a right triangle when the lengths of two sides are known. It is a useful tool to solve a variety of geometry problems.

See more about Pythagorean theorem at: https://brainly.com/question/29290893

#SPJ11