Solve by substitution method 2x+7y=11 and x-3y=5​

The probability of choosing a password with no Y's and O's is 20/30 = 2/3, or approximately 0.667. The two probabilities are the same, so neither is greater than the other.

Probability is a measure of the likelihood or chance that an event will occur. It is expressed as a number between 0 and 1, where 0 represents an impossible event and 1 represents a certain event.

In mathematical terms, probability is calculated as the ratio of the number of favorable outcomes to the total number of possible outcomes. For example, if you flip a fair coin, the probability of getting heads is 0.5, because there is one favorable outcome (heads) out of two possible outcomes (heads or tails).

To calculate the probability of choosing a password with no Y's or no O's, we need to first count the number of valid passwords without Y's or O's and then divide it by the total number of possible passwords.

Number of valid passwords without Y's:

There are 5 choices for the first character (B, R, O, G, P), since Y is not allowed.

There are 4 choices for the second character (any of the remaining 5 letters except Y), since we cannot repeat the first letter.

So the total number of valid passwords without Y's is 5 x 4 = 20.

Number of valid passwords without O's:

There are 5 choices for the first character (Y, B, R, G, P), since O is not allowed.

There are 4 choices for the second character (any of the remaining 5 letters except O), since we cannot repeat the first letter.

So the total number of valid passwords without O's is 5 x 4 = 20.

The total number of possible passwords is the number of ways to choose 2 characters out of 6, without repetition. This is given by the formula:

6P2 = 6! / (6 - 2)! = 6 x 5 = 30

Therefore, the probability of choosing a password with no Y's is 20/30 = 2/3, or approximately 0.667.

Similarly, the probability of choosing a password with no O's is also 20/30 = 2/3, or approximately 0.667.

The two probabilities are the same, so neither is greater than the other.

To know more about choices visit:

https://brainly.com/question/29200336

#SPJ1

Answer:

The answer to your problem is, C. -2

Step-by-step explanation:

To solve : 4(y - 3) +19=8(2y + 3) + 7?

Open the bracket:

4y - 12 + 19 = 16y + 24 + 7 

Collect like terms

4y - 16y = 24 + 7 + 12 - 19

-12y = 24

Divide both sides by - 12 to isolate y

-12y / - 12 = 24 / - 12 

y = -2

Thus the answer to your problem is, C. -2

For first step you do not really need to “ open the bracket “ just solve it.

Answer:

m = 2/3

Step-by-step explanation:

Given two points on a line, we can find the slope, m, of a linear equation using the slope formula:

[tex]m=\frac{y_{2}-y_{1} }{x_{2}-x_{1} }[/tex], where x1 and y1 are one point and x2 and y2 are the other point.

The order of the points don't matter as long you pair the points already together (e.g., if you choose 7 as x1, you have to choose -2 as y2, and if you choose 1 as x1, you have to choose -6 as y2).

Thus, if we allow the first point to be x1 and y2 and the second point to be x2 and y2, our slope is:

[tex]m=\frac{-6-(=2)}{1-7}\\ \\m=\frac{-6+2}{-6}\\ \\m=\frac{-4}{-6}\\ \\m=\frac{2}{3}[/tex]

Answer: There are 8 campers for every 1 counselor.

Step-by-step explanation:

A ratio is relation in number between two things. 8:1 means that there are 8 ___s for every 1 ____.

The probability that Karen's second card will be a black card is 3/650.

After Sandra deals Karen a red seven, there are 51 cards remaining in the deck, of which 26 are black cards. So the probability of Karen drawing a black card on her second draw depends on whether or not the first card she drew was black or red:

If the first card Karen drew was black, then there are 25 black cards left in the deck out of 50 cards, since one card has already been drawn. So the probability of Karen drawing a black card on her second draw is 25/50 = 1/2.

If the first card Karen drew was red, then there are still 26 black cards left in the deck out of 50 cards, since one card has already been drawn. So the probability of Karen drawing a black card on her second draw is 26/50 = 13/25.

Since there are 26 red cards and 26 black cards in a standard deck of playing cards, the probability of Karen being dealt a red seven by Sandra is 2/52 = 1/26.

To find the overall probability of Karen being dealt a red seven and then drawing a black card on her second draw, multiply the probability of these two events occurring:

P(red seven and black card) = P(red seven) × P(black card on second draw | red seven)

P(red seven) = 1/26

P(black card on second draw | red seven) = 13/25

P(red seven and black card) = (1/26) × (13/25) = 13/650

Therefore, the probability of Karen's second card being a black card, given that Sandra dealt her a red seven, is 13/650.

Find out more on probability here: https://brainly.com/question/25870256

#SPJ1

The complete question:

Sandra and Karen are playing a game of cards with a standard deck of playing cards. Sandra deals Karen a red seven. What is the probability that Karen’s second card will be a black card?

Answer:

-4860

Step-by-step explanation:

The formula for finding the nth term (An) of a geometric sequence is;

An = a₁ * r^(n-1)

where a₁ is the first term, r is the common ratio, and n is the number of terms.

Plugging in the given values, we have;

An = 20 * (-3)^(6-1)

An = 20 * (-3)^5

An = 20 * (-243)

An = -4860

Therefore, the answer is (Ob) -4860

Answer: The statement that is not true is D.

Explanation:

We know that the area of the rectangle is 160 square inches. Let's assume that the length of the base is b inches. Then, the height of the rectangle would be 160/b inches (since area = base x height).

Now, we can check the given statements:

A. The base of the figure is 20 inches in length.

We do not know the length of the base, so we cannot say for sure whether this statement is true or false.

B. The formula A=b/8 could be used to determine the area.

This statement is false. The correct formula for the area of a rectangle is A = b x h.

C. The formula b=160/8 could be used to determine the length of the base.

This statement is true. We can solve for b as:

b = A/h = 160/(160/b) = 8

So, the length of the base is 8 inches.

D. The formula 160(b)(8) could be used to determine the length of the base.

This statement is false. The given formula does not make sense in the context of the problem, and it does not allow us to determine the length of the base.

Step-by-step explanation:

Answer:

20(x + 2) = 20x + 40 = 4(5x + 10)

The amount that Nancy can save each month and put in the savings account is $10.

Savings are funds that are not used right away but are instead set aside for unforeseen expenses or future needs. It is the gap between one's earnings (income) and their outlays (expenditures) (the amount of money spent). Regular income, investment profits, tax refunds, and gifts are just a few of the several ways that people might support their savings. You may save money in a variety of ways, such as by creating a budget and eliminating wasteful spending, opening a savings account, buying stocks or bonds, and making contributions to retirement plans like 401(k)s or IRAs.

The total income earned by Nancy is:

30 + 50 + 25 + 35 = $140

The total expenses are:

40 + 60 + 30 = $130

The amount remaining after expenses is:

Savings = 140 - 130 = $10

Hence, the amount that Nancy can save each month and put in the savings account is $10.

Learn more about income here:

https://brainly.com/question/14732695

#SPJ1

There are 75 percent of Americans consume alcoholic beverages regularly. so, the correct answer is D).

According to a 2021 survey conducted by the National Institute on Alcohol Abuse and Alcoholism, approximately 75% of adults in the United States reported that they had consumed alcohol in the past year.

However, it's important to note that this does not necessarily mean that they consume alcohol regularly. The percentage of Americans who consume alcoholic beverages regularly may vary depending on how "regularly" is defined and the specific population being studied.

So, the correct option is D).

To know more about alcoholic beverages:

https://brainly.com/question/13312921

#SPJ4

Answer:

Step-by-step explanation:

The surface area of a right circular cone can be found using the formula:

A = πr²+ πrl

where r is the radius of the base, l is the slant height, and π is approximately 3.14159.

In this case, the diameter of the base is 8 m, so the radius is 4 m. The slant height is 18.5 m. The height is not needed for this calculation.

Substituting the given values, we get:

A = π(4 m)² + π(4 m)(18.5 m)

A = π(16 m²) + π(74 m²)

A = π(90 m²)

Using the approximation π ≈ 3.14159, we get:

A ≈ 282.74 m²

Therefore, the surface area of the right circular cone is approximately 283 m² rounded to the nearest whole.

A rectangular pyramid is a pyramid with a rectangular base and four triangular faces that meet at a single point at the top, called the apex. It is a three-dimensional solid with five faces, including the base, and is a type of pyramid with a rectangular base.

No, we do not have enough information to find the surface area of the rectangular pyramid.

To find the surface area of a rectangular pyramid, we need to know the lengths of all four sides of the base, as well as the slant height and height of each triangular face.

In this case, we only have two sides of the rectangular base (5 ft and 7 ft) and the height of one of the triangular faces (4 ft). We do not have enough information to find the length of the other two sides of the base or the slant height and height of each triangular face.

Therefore, we cannot find the surface area of the rectangular pyramid with the given information.

To know  more about area

brainly.com/question/27683633

#SPJ9

The width of the cooling tower at the base of the structure is 100 meters, rounded to the nearest whole number.

Given that the cooling tower's walls are modeled by where the measurements are in meters and the width of the

cooling tower at the base of the structure is required, we can find the width by using the formula for the area of a

trapezoid. The area of the trapezoid represents the area of the base of the cooling tower.

Area of a trapezoid = 1/2 × (a + b) × h

where a and b are the lengths of the parallel sides of the trapezoid and h is the height or perpendicular distance

between the parallel sides.

In this case, the parallel sides of the trapezoid are not given, but we are given the height of the cooling tower, which is

100 meters. We also know that the area of the base of the cooling tower is 10,000 square meters.

Therefore, we can use the formula for the area of a trapezoid to find the sum of the lengths of the parallel sides of the

trapezoid, which will give us the width of the cooling tower at the base.

Area of a trapezoid = 1/2 × (a + b) × h

10,000 = 1/2 × (a + b) × 100

100 = (a + b)/2

200 = a + b

Width of cooling tower at the base = (a + b)/2

Width of cooling tower at the base = 200/2

Width of cooling tower at the base = 100 meters

Therefore, the width of the cooling tower at the base of the structure is 100 meters, rounded to the nearest whole number.

for such more question on trapezoid

https://brainly.com/question/26785245

#SPJ11

The answer is A. f(x) and g(x) are closed under addition because when added, the result will be a polynomial.

Addition is denoted using the plus sign (+) or a plus symbol. Addition can be used to find the total in a group of numbers, to combine two or more numbers, or to compare two numbers.

When two polynomials f(x) and g(x) are added, the result is also a polynomial. The degree of the resultant polynomial is equal to the highest degree of the two added polynomials.

Thus, when a polynomial is added to another polynomial, the result will always be a polynomial.

This is true because when two polynomials are added, the resulting polynomial will have the same form as the two polynomials that were added.

In other words, the sum of two polynomials will have the same coefficients and powers of x as the two polynomials that were added.

Therefore, f(x) and g(x) are closed under addition because when added, the result will always be a polynomial.

For more questions related to polynomial

https://brainly.com/question/1496352

#SPJ1

For given triangles, Condition 3 and 6 are true.

What is a triangle's definition?

A triangle is a closed two-dimensional shape with three straight sides, three angles, and three vertices (or corners). It is formed by connecting three non-collinear points in a plane with straight lines. The sum of the interior angles of a triangle is always 180 degrees, and each exterior angle is equal to the sum of its two adjacent interior angles. Triangles can be classified based on the length of their sides and the size of their angles, such as equilateral, isosceles, scalene, acute, right, and obtuse triangles.

Now,

As we can see that ΔABC is rotated 90° clockwise to make

ΔDEF.

So, the angles follows these conditions

∠F=∠A

∠E=∠C

∠D=∠B

hence,

             Condition 3 and 6 are true.

To know more about triangles visit the link

brainly.com/question/2773823

#SPJ1

Answer:

Step-by-step explanation:

The slope of the line passing through (0,3) and (1,-1) is -4.

What is slope of the line?

The slope of a line is a measure of its steepness or incline. It describes how much the line rises or falls as it moves horizontally.

To find the slope of the line passing through (0,3) and (1,-1), we can use the slope formula:

m = (y2 - y1)/(x2 - x1)

where (x1,y1) and (x2,y2) are the coordinates of the two points.

Plugging in the given coordinates, we get:

m = (-1 - 3)/(1 - 0)

m = -4/1

m = -4

Therefore, the slope of the line passing through (0,3) and (1,-1) is -4.

The slope of a line can be positive, negative, zero, or undefined (when the line is vertical). A positive slope means that the line is increasing as it moves to the right, while a negative slope means that the line is decreasing as it moves to the right. A slope of zero means that the line is horizontal, and an undefined slope means that the line is vertical.

To know more about slop of the line, visit:

https://brainly.com/question/3605446

#SPJ1

Complete question is: Slope of the given line passing through (0,3) and (1,-1) is -4.

Step-by-step explanation:

To find the probability of Mario randomly selecting a red chip or a white chip, we need to first determine the total number of red and white chips he has.

Total number of red and white chips = 45 + 24 = 69

Therefore, the probability of Mario randomly selecting a red chip or a white chip is:

P(red or white) = (number of red chips + number of white chips) / total number of chips

P(red or white) = (45 + 24) / (45 + 12 + 24)

P(red or white) = 69 / 81

P(red or white) = 0.85

So the probability of Mario randomly selecting a red chip or a white chip is 0.85 or 85%.

Answer: 0.8519 ≈ 85%

Step-by-step explanation:

        To find the probability, we will divide wanted outcomes by total possible outcomes. See below.

[tex]\displaystyle \frac{\text{wanted outcomes}}{\text{possible outcomes}} =\frac{\text{number of red or white chip}}{\text{total number of chips}} =\frac{45+24}{45+12+24}= \frac{69}{81}[/tex]

       = 0.8519 ≈ 85%

        The probability that Mario will randomly select a red or white chip is 0.8519 or about 85%.

Step-by-step explanation:

When x -5 is a positive

   x -5  = 2

    x = 7

when x -5 is a negative

    x-5 = -2

       x = 3

Answer:

x = 15.

Therefore, the width of the walkway is 15m.

Step-by-step explanation:

Let's represent the width of the walkway by "x".

We know that the total width/base of the area (including the walkway) is 300m, so we can set up the equation:

length of field + 2(width of field) + 2(width of walkway) = 300

Substituting the given values, we get:

200 + 2w + 2x = 300

Simplifying the equation, we get:

2w + 2x = 100

We also know that the area of the field is 30,000m, so we can set up the equation:

length of field x width of field = 30,000

Substituting the given values, we get:

200w = 30,000

Simplifying the equation, we get:

w = 150

Finally, we know that the total area (including the walkway) is 60,000m, so we can set up the equation:

(length of field + 2x) x (width of field + 2x) = 60,000

Substituting the values we've found so far, we get:

(200 + 2x) x (150 + 2x) = 60,000

Expanding the equation, we get:

300x^2 + 1000x - 45,000 = 0

Solving for x using the quadratic formula, we get:

x = 15 or x = -30/100

Since x can't be negative, we can discard the negative solution and conclude that x = 15.

Therefore, the width of the walkway is 15m.

The assumptions include that the path of the ball can be modeled by a parabolic function, that data on the trajectory of the ball is needed, and that matrices can be used to solve for the constants a, b, and c. Finally, the inverse of the matrix can be computed using matrix algebra.

A matrix is a rectangular array of letters, numbers, or expressions in mathematics that are organized in rows and columns. In addition to representing and transforming data in statistics, physics, and computer science, matrices are also used to represent and convert linear equations and transformations in linear algebra.

We need to make some assumptions and approximations in order to develop an equation for the flight of the golf ball because the actual path of the ball is influenced by a number of variables, including wind, temperature, humidity, and spin. The idea that a parabolic function may simulate the ball's trajectory is one that is frequently held.

We would need information on the ball's trajectory, such as height and distance at various points along the trip, in order to perform regression. Regression analysis cannot be used to derive an equation for the trajectory of the golf ball in the absence of this data.

To use matrices, we can set up a system of equations based on the parabolic function:

[tex]y = ax^2 + bx + c[/tex]

where x is the distance traveled by the ball, y is the height of the ball, and a, b, and c are constants to be determined.

We can set up three equations based on the following assumptions:

At the starting point (x=0), the height of the ball is zero.

At the point where the ball hit the tree (x = d), the height of the ball is the height of the tree (90 feet).

At the landing point on the green (x = D), the height of the ball is zero.

Using these assumptions, we can set up the following system of equations:

c = 0 (from assumption 1)

[tex]ad^2 + bd + c[/tex] = 90 (from assumption 2)

[tex]aD^2 + bD + c[/tex] = 0 (from assumption 3)

To solve for the constants a, b, and c, we can use matrix algebra to write the system in matrix form:

[tex][0 0 1] [c] [0][/tex]

c[tex][d^2 d 1] * [b][/tex] = [90]

[tex][D^2 D 1][/tex] [a] [0]

Multiplying the matrices, we get:

[0 0 1] [c] [0]

[tex][d^2 d 1][/tex] * [b] = [90]

[tex][D^2 D 1][/tex] [a] [0]

Simplifying, we get:

[c] [0]

[b] = [90] * [tex][d^2 d 1]^-1 * [d^2 d 1][/tex]

[a] [0]

where the inverse of the matrix [tex][d^2 d 1][/tex] can be computed using matrix algebra. Once we have the values of a, b, and c, we can plug them into the equation [tex]y = ax^2 + bx + c[/tex] to get the equation for the path of the golf ball.

To know more about matrix, visit

brainly.com/question/9967572

#SPJ1

The measure of DE is 8x. This was found by using the distance formula to calculate the length of the side.

Measurements are the process of comparing an unknown quantity to a known reference value in order to estimate the size, quantity, distance, weight, or other characteristics of that unknown quantity. Measurements are used in science and engineering to quantify the properties of objects, or to compare objects to each other. Measurements are also used in everyday life to help make decisions and assess the impact of changes.

To find the measure of DE, we must first calculate the length of the side. We can do this by using the distance formula. The distance formula is used to calculate the length of a line between two points in a plane. The formula is given as d = √(x2 - x1)2 + (y2 - y1)2.

For the side DE, we can use the coordinates (2x+7, 4(x-3)). The first point is (2x+7, 4(x-3)) and the second point is (2x+7, 4(x+3)). We can substitute these points into the distance formula to calculate the length of DE.

The formula becomes d = √[(2x+7 - 2x+7)2 + (4(x+3) - 4(x-3))2]

Simplifying, we get d = √[(0)2 + (8x)2]

d = √[64x2]
d = 8x

Therefore, the measure of DE is 8x.

To know more about measurements click-
https://brainly.com/question/28835783
#SPJ1

Using the median, which is not affected by outliers, would provide a better representation of the typical or central value of the data.

What is median?

Median is a measure of central tendency that represents the middle value in a dataset when the values are arranged in order of magnitude. To find the median, you need to arrange the values in order from smallest to largest and then find the middle value.

Based on the given information, the median is the best measure of center because there are outliers present. The reason for this is because the presence of outliers can greatly affect the mean and make it a less representative measure of central tendency.

In this case, the dots above 6, 7, and 3 may be considered as outliers since they are far from the other data points.

Therefore, using the median, which is not affected by outliers, would provide a better representation of the typical or central value of the data.

To learn more about median from the given link:

brainly.com/question/28060453

#SPJ1

Answer: approximately 7.3 kilometers.

Step-by-step explanation:

Using the Pythagorean theorem, we can write:

x^2 = 7^2 + 2^2

x^2 = 49 + 4

x^2 = 53

Taking the square root of both sides, we get:

x = sqrt(53)

Using a calculator or estimating, we find:

x ≈ 7.3 km

So the straight-line distance between Ryan's house and Emmy's house is approximately 7.3 kilometers.

To write an absolute value Equation for a given solution set, we need to use the appropriate formula depending on the nature of the solution set.

To write an absolute value equation for a given solution set, we need to first understand what absolute value is. Absolute value is a mathematical function that returns the positive value of a given number, irrespective of its sign. For example, the absolute value of -5 is 5, and the absolute value of 5 is also 5. Now, let's consider the given figures and their respective solution sets:

Figure 1: The solution set for this figure is {2, -2}. To write an absolute value equation for this solution set, we can use the formula |x| = a, where a is the value of the solution set. Therefore, the absolute value equation for this figure is |x| = 2.

Figure 2: The solution set for this figure is {5}. To write an absolute value equation for this solution set, we can use the formula |x - b| = a, where b is the midpoint of the solution set and a is the distance from the midpoint to one of the solutions. Therefore, the absolute value equation for this figure is |x - 5| = 0.

Figure 3: The solution set for this figure is {-3, 3}. To write an absolute value equation for this solution set, we can again use the formula |x| = a, where a is the value of the solution set. Therefore, the absolute value equation for this figure is |x| = 3.

In conclusion, to write an absolute value equation for a given solution set, we need to use the appropriate formula depending on the nature of the solution set.

To Learn More About Equation

https://brainly.com/question/22688504

SPJ11