iron is obtained commercially by reacting hematite (fe2o3) with carbon monoxide. fe2o3 (s) 3 co(g) 2 fe(s) 3 co2(g) how many grams of iron are produced if 27.0 moles of hematite react with 86.0 moles of carbon monoxide? question blank 1 of 3

Answer:

We can use the kinematic equation that relates initial velocity, final velocity, acceleration, and displacement:

v^2 = u^2 + 2as

where

u = initial velocity (which is 0 in this case, since the ball is dropped)

v = final velocity (what we're trying to find)

a = acceleration due to gravity (-9.8 m/s^2)

s = displacement (which is the distance the ball falls, or 22 m)

Plugging in the given values, we get:

v^2 = 0 + 2(-9.8)(22)

v^2 = -431.2

Since we can't have a negative final velocity, we need to take the square root of both sides and include a negative sign to indicate that the final velocity is in the opposite direction of the initial velocity:

v = -sqrt(-431.2)

v ≈ -20.8 m/s

So the final velocity of the ball is approximately -20.8 m/s.

Answer:

The final velocity is -20.8 m/s.

Explanation:

To solve this problem, we can use one of the kinematics equations. Let's first write out which variables we know and what we are trying to figure out. (Note that acceleration due to gravity and Δy must have the same sign).

a = -9.8 m/s²

Δy = -22 m

v1 = 0

v2 = ?

Given these variables, we should use the following equation:

v2² = v1² + 2aΔy

Our next step is to substitute in the given variables and simplify.

v2² = (0) + (2)(-9.8 m/s²)(-22m)

v2² = 431.2

Our final step is to take the square root of both sides to find v2.

v2 = √431.2

v2 = -20.8 m/s

Therefore, the final velocity is -20.8 m/s. The velocity must be in the same direction as the displacement and the acceleration, so its sign should be negative.

For more information about similar physics problems with falling objects, check out these other questions on Brainly:

https://brainly.com/question/14251349

https://brainly.com/question/17107662

The response "0 atm; because kp is very large, nearly all the SO2(g) and O2(g) are consumed before the system reaches equilibrium" is the closest to the correct answer

The balanced chemical equation for the reaction between SO2(g) and O2(g) to produce SO3(g) is:

2SO2(g) + O2(g) ⇌ 2SO3(g)

At a certain temperature, the equilibrium constant for this reaction, Kp, is very large, which indicates that the reaction strongly favors the formation of products (SO3).

In an evacuated rigid vessel initially filled with SO2(g) and O2(g), each with a partial pressure of 1 atm, the reaction will proceed to reach equilibrium. At equilibrium, the partial pressures of SO2(g), O2(g), and SO3(g) will be related by the equilibrium constant Kp as follows:

Kp = (P(SO3))^2 / (P(SO2))^2 x P(O2)

where P(SO2), P(O2), and P(SO3) are the partial pressures of SO2(g), O2(g), and SO3(g) at equilibrium, respectively.

Since Kp is very large, we can assume that the reaction goes to completion and that all of the SO2(g) and O2(g) react to form SO3(g). Therefore, the partial pressure of O2(g) at equilibrium will be zero, and the correct answer is 0 atm.

So the response "0 atm; because kp is very large, nearly all the SO2(g) and O2(g) are consumed before the system reaches equilibrium" is the closest to the correct answer.

For more such questions on Equlibrium

https://brainly.com/question/13414142

#SPJ11

Answer:

c = 0.0635 J/g°C

Explanation:

We can use the formula for heat energy:

Q = m * c * ΔT

where Q is the heat energy absorbed by the substance, m is its mass, c is its specific heat capacity, and ΔT is the change in temperature. Rearranging the formula, we get:

c = Q / (m * ΔT)

Plugging in the given values, we get:

c = 9.0 J / (4.3 g * (80.0°C - 50.0°C))

c = 9.0 J / (4.3 g * 30.0°C)

c = 0.0635 J/g°C

Therefore, the specific heat capacity of the substance is 0.0635 J/g°C.

At the equivalence point and after the addition of 3 mL of 0.25 M NaOH, the pH of the solution is approximately 4.36.

The first step in solving this problem is to determine the moles of acid (HA) present in the initial solution.

moles of HA = concentration of HA x volume of HA

moles of HA = 0.100 M x 0.0250 L

moles of HA = 0.00250 mol

Next, we need to determine the amount of NaOH needed to reach the equivalence point. Since we have a 1:1 stoichiometric ratio between HA and NaOH, the moles of NaOH required to reach the equivalence point will be equal to the moles of HA present.

moles of NaOH = 0.00250 mol

To calculate the volume of NaOH required to reach the equivalence point, we can use the equation;

moles of NaOH =concentration of NaOH x volume of NaOH

0.00250 mol = 0.25 M x volume of NaOH

volume of NaOH = 0.0100 L = 10.0 mL

This means that 10.0 mL of 0.25 M NaOH will be required to reach the equivalence point.

At the equivalence point, all of the HA has reacted with the NaOH to form the salt, sodium salt (NaA), and water. This means that the moles of NaOH added to reach the equivalence point will be equal to the moles of HA that have reacted;

moles of NaOH = 0.0100 L x 0.25 M = 0.00250 mol

moles of HA reacted = 0.00250 mol

The total volume of the solution at the equivalence point is:

volume of solution = volume of HA + volume of NaOH

volume of solution = 0.0250 L + 0.0100 L

volume of solution = 0.0350 L

The concentration of the resulting solution after the addition of 10 mL of 0.25 M NaOH is;

moles of NaOH added = 0.0100 L x 0.25 M = 0.00250 mol

moles of NaA formed = 0.00250 mol

moles of HA remaining = moles of HA - moles of HA reacted = 0.00250 mol

concentration of NaA = moles of NaA / volume of solution = 0.00250 mol / 0.0350 L = 0.0714 M

concentration of HA = moles of HA / volume of solution = 0.00250 mol / 0.0350 L = 0.0714 M

Since NaA is the conjugate base of the weak acid HA, the solution is a buffer. To calculate the pH of the buffer solution, we can use the Henderson-Hasselbalch equation;

pH = pKa + log([A⁻]/[HA])

where pKa is the acid dissociation constant of HA, [A⁻] is the concentration of the conjugate base (NaA), and [HA] is the concentration of the weak acid (HA).

The pKa of HA is given as 4.40 x 10⁻⁴, so we can substitute this value along with the concentrations of NaA and HA to get:

pH = -log(4.40 x 10⁻⁴) + log(0.0714/0.0714)

pH = 4.36

To know more about equivalence point here

https://brainly.com/question/4518249

#SPJ4

Total 12 electrons are transferred in the reaction.

In the above reaction, the oxidation state of chlorine changes from +7 to +3. To determine the number of electrons transferred, we need to calculate the change in oxidation state of chlorine.

Each chlorate ion (ClO₄⁻) has a charge of -1, and each chlorite ion (ClO₃⁻) has a charge of -1 as well.

The oxidation state of oxygen is -2, so the oxidation state of the four oxygen atoms in the chlorate ion is -8, and the oxidation state of the three oxygen atoms in the chlorite ion is -6.

Let x be the oxidation state of chlorine in the chlorate ion, then we have;

x + 4(-2) = -1

x = +7

Let y be the oxidation state of chlorine in the chlorite ion, then we have;

y + 3(-2) = -1

y = +5

Therefore, each chlorine atom undergoes a reduction of 2 units, which corresponds to the gain of 2 electrons.

Since there are 6 chlorine atoms in total (3 in chlorate and 3 in chlorite), the total number of electrons transferred in the reaction is;

6 x 2 = 12 electrons.

To know more about oxidation state here

https://brainly.com/question/11313964

#SPJ4

A common example of a solution is saltwater. In this solution, the solute is salt (NaCl) and the solvent is water (H2O).

When salt is added to water, it dissolves into the liquid to form a homogeneous mixture. The water molecules surround the ions of the salt and pull them apart from each other, resulting in the formation of individual salt ions dispersed throughout the water. The salt ions become evenly distributed throughout the water, resulting in a solution.

In this example, the salt (NaCl) is the solute because it is the substance that is being dissolved. The water (H2O) is the solvent because it is the substance that dissolves the salt and creates the solution.

To know more about homogeneous mixture, visit:

https://brainly.com/question/24898889

#SPJ1

The statements about diels alder reaction which are true are given in the explanation part.

The following statements about the Diels-Alder reaction are true:

- True: It is a reaction involving pi-electrons.
- True: It is a concerted reaction, meaning that it occurs in a single step without the formation of reaction intermediates.
- False: It is not necessarily favored by entropy considerations, as the reaction can be endothermic and enthalpy-driven.
- True: It is a [4+2] cycloaddition, meaning that it involves the formation of a 6-membered ring from a 4-carbon diene and a 2-carbon dienophile.
- False: While some Diels-Alder reactions can be thermal, others require specific conditions such as high pressure or the use of a catalyst to occur.
To know more about diels alder reaction go through:-

https://brainly.com/question/21503302

#SPJ4

Less chemical waste is generated because there are no solvents to remove. The reaction often costs less because solvents can be expensive.

The reaction rate is greater because the concentration of reagents is greater. These options are correct.

A solvent is a substance that dissolves a solute, producing a solution. In addition to being a liquid, a supercritical fluid, a solid, or a gas can also be solvent. All the ions and proteins in a cell are dissolved in water, which is a solvent for polar molecules and the most frequent solvent employed by living things.

chemical reaction, the transformation of one or more chemicals (the reactants) into one or more distinct compounds (the products). Chemical elements or chemical compounds make up substances. In a chemical reaction, the atoms that make up the reactants are rearranged to produce various products.

Learn more about Solvent here: brainly.com/question/30885015

#SPJ4

Effects of influenza ​are A muscle or other part of the body hurts. headaches. fatigue (tiredness) Some people may experience vomiting and diarrhea, which is more prevalent in children than in adults.

The flu, also known as influenza, is a contagious viral illness that can cause mild to severe symptoms as well as life-threatening complications, including death, in otherwise healthy children and adults.

Influenza viruses primarily move from person to person through coughing or sneezing. They can also be transmitted less frequently by touching a contaminated surface and then touching the mouth, eyes, or nose. Individuals can spread the flu to others even before their own symptoms appear and for up to a week after symptoms appear.

The influenza virus infects the nose, throat, and sometimes the lungs, causing a contagious respiratory disease. It can bring mild to serious illness and, in extreme cases, death.

To know more about influenza , visit ;

brainly.com/question/29386358

#SPJ1

When 2.24 mol NaOH and 1.20 mol [tex]CO2[/tex] are allowed to react, NaOH is the limiting reactant.

Let's try to figure out the limiting reactant of the reaction between NaOH and CO2 by using stoichiometry.

Stoichiometry is a branch of chemistry that deals with the calculation of quantities of reactants and products involved in a chemical reaction.

By using stoichiometry, we can calculate the limiting reactant of a reaction, which is the reactant that gets consumed entirely and determines the amount of product formed.

Limiting reactant calculation

[tex]NaOH + CO2 → Na2CO3 + H2O[/tex]

From the balanced chemical equation above, we can see that one mole of NaOH reacts with one mole of CO2 to produce one mole of Na2CO3 and one mole of H2O.

Using the mole ratio, we can calculate the number of moles of Na2CO3 that will be formed from 2.24 mol of NaOH.

[tex]2.24 mol NaOH × 1 mol Na2CO3/1 mol NaOH = 2.24 mol Na2CO3[/tex]

Similarly, we can calculate the number of moles of Na2CO3 that will be formed from 1.20 mol of CO2.1.20 mol CO2 × 1 mol Na2CO3/1 mol CO2 = 1.20 mol Na2CO3

Therefore, NaOH is the limiting reactant because it produces a smaller number of moles of Na2CO3 than CO2. NaOH is the limiting reactant, and we can say that 2.24 mol of NaOH reacts with 1.20 mol of CO2 to form 1.20 mol of Na2CO3.

To know more about limiting reagent refer to-

brainly.com/question/26905271#

#SPJ11

The new volume of the gas at 26.8°C and 742 mmHg is approximately 4.28 L.

To find the new volume of the gas at the given temperature and pressure, we can use the combined gas law formula:

P1 × V1 / T1 = P2 × V2 / T2

where P1 is the initial pressure, V1 is the initial volume, T1 is the initial temperature in Kelvin, P2 is the final pressure, T2 is the final temperature in Kelvin, and V2 is the final volume.

Convert the temperatures to Kelvin.
T1 = 25.6°C + 273.15 = 298.75 K
T2 = 26.8°C + 273.15 = 299.95 K

Convert the pressures to atm.
P1 = 748 mmHg × (1 atm / 760 mmHg) = 0.98421 atm
P2 = 742 mmHg × (1 atm / 760 mmHg) = 0.97632 atm

Rearrange the combined gas law formula to solve for V2.
V2 = P1 × V1 × T2 / (T1 × P2)

Substitute the given values into the formula.
V2 = (0.98421 atm) × (4.25 L) × (299.95 K) / (298.75 K × 0.97632 atm)

Calculate the final volume, V2.
V2 ≈ 4.28 L

The volume of the gas at 26.8°C and 742 mmHg is approximately 4.28 L.

More on gas volume: https://brainly.com/question/29490815

#SPJ11

To make 50.0 mL of a 0.100 M ammonia buffer with a pH of 9.25, we need to mix 50.0 mL of 1.00 M ammonia and 50.0 mL of 1.00 M HCl.

To make a buffer solution, we need to mix a weak base and its conjugate acid in the appropriate amounts. In this case, we want to make an ammonia buffer with a pH of approximately 9.25, which is close to the pKa of ammonia (9.25). Henderson-Hasselbalch equation for buffer will be;

pH = pKa + log([A⁻]/[HA])

where [A⁻] is the concentration of the conjugate base (ammonia in this case) and [HA] is the concentration of the weak acid (ammonium ion in this case). We are given that the final buffer solution has a pH of 9.25 and a concentration of 0.100 M.

Calculating the moles of ammonia and ammonium ion needed

pH = pKa + log([A⁻]/[HA])

9.25 = 9.25 + log([A⁻]/[HA])

log([A⁻]/[HA]) = 0

[A⁻]/[HA] = 1

[HA] = [A⁻] = 0.050 M (half the final concentration)

So, we need 0.050 moles of ammonia and 0.050 moles of ammonium ion in the final solution.

Calculating the volume of 1.00 M ammonia needed

0.050 moles = 1.00 M x V

V = 0.050 L = 50.0 mL

So, we need 50.0 mL of 1.00 M ammonia.

Calculating the volume of 1.00 M HCl needed

We can use the equation;

moles of HCl = moles of NH₃ = 0.050

The molarity of HCl can be calculated using the equation;

Molarity = moles of solute/volume of solution (in liters)

0.050 moles / volume = 1.00 M

volume = 0.050 L = 50.0 mL

So, we need 50.0 mL of 1.00 M HCl.

To Know more about buffer solution here

https://brainly.com/question/15709146

#SPJ4

The final state of the hydrogen atom is the n=2 energy level.

The initial state of the hydrogen atom is the ground state, where the electron is in the n=1 energy level. When it absorbs a photon of wavelength 93.73 nm, it jumps to a higher energy level. We can calculate the energy of the absorbed photon using the equation E = hc/λ, where h is Planck's constant, c is the speed of light, and λ is the wavelength of the photon.

E = (6.626 x 10^-34 J s)(2.998 x 10^8 m/s) / (93.73 x 10^-9 m) = 1.653 x 10^-18 J

This energy corresponds to the difference in energy between the ground state and some higher energy level, which we can calculate using the Rydberg equation:

1/λ = R_H(1/n_i^2 - 1/n_f^2)

where λ is the wavelength of the emitted photon, R_H is the Rydberg constant for hydrogen, and n_i and n_f are the initial and final energy levels, respectively. We know λ and R_H, and we can assume n_i = 1, so we can solve for n_f:

1/λ = R_H(1 - 1/n_f^2)

n_f^2 = 1 / (1 - λ/R_H) = 4

n_f = 2

To know more about hydrogen, here

brainly.com/question/28494990

#SPJ4

The correct answer is option A) BF3 because it receives a lone pair. In this reaction, a Lewis acid-base reaction is taking place, in which a Lewis acid (electron pair acceptor) and a Lewis base (electron pair donor) are reacting to form a coordinate covalent bond.

BF3 serves as an electron pair acceptor and is the Lewis acid. This is due to the fact that BF3 has an open p-orbital that can receive a Lewis base's sole pair of electrons, such as NH3. Here, NH3 serves as an electron pair donor and is a Lewis base.

This is due to the fact that NH3 has a single pair of electrons that can be transferred to the vacant p-orbital in BF3.

This is crucial for forming the coordinating covalent bond that gives rise to the compound NH3BF3 between BF3 and NH3.

Complete Answer:

What is the Lewis acid in the following reaction? NH3 + BF3 <----> NH3BF3

Group of answer choices

A) BF3 because it receives a lone pair

B) BF3 because it donates a lone pair

C) NH3 because it receives a lone pair

D) NH3 because it donates a lone pair

To learn more about Lewis acid-base visit:

https://brainly.com/question/23433599

#SPJ4

From a ph meter titration curve a student experimentally determines the pka of benzoic acid to be 4.06. the experimental ka for benzoic acid is  approximately [tex]8.72[/tex] × [tex]10^{-5}[/tex]

To calculate the experimental Ka for benzoic acid, you can use the relationship between Ka and pKa:

pKa = -log(Ka).

In this case, the student determined the pKa to be 4.06.
To find the Ka, you need to use the inverse of the log function, which is [tex]10 ^{-pKa}[/tex].

So, Ka = [tex]10^{-4.06}[/tex]
Ka  ≈ [tex]8.72[/tex] × [tex]10^{-5}[/tex]
The experimental Ka for benzoic acid is approximately [tex]8.72[/tex] × [tex]10^{-5}[/tex]

A titration curve is a graph that shows the pH of a solution as a function of the amount of titrant applied.

It is used to calculate the equivalence point, which is the point at which the amount of titrant administered is stoichiometrically equivalent to the amount of analyte in the solution being tested.

For more such questions on  titration curve, click on:

https://brainly.com/question/16749233

#SPJ11

The limiting reagent that stops when all the phenyl bromide has been used up, meaning that 0.0079 moles of carbon dioxide will react to produce 0.00395 moles of benzoic acid.

How to find limiting reagent?

The limiting reagent in the overall reaction is phenyl bromide given that the Grignard reaction used 1.4555 g phenyl bromide, 10 g carbon dioxide, 0.5734 g magnesium filings, and 30.2 ml of 6m HCl. This can be determined by calculating the moles of each reactant and identifying which one is limiting in the reaction.

A Grignard reaction is a type of chemical reaction where an alkyl, aryl or vinyl magnesium halide (Grignard reagent) reacts with a carbonyl group, acid halide or ester to produce a tertiary or secondary alcohol, ketone or tertiary or secondary alcohol ester as the product. It is an important reaction for the formation of carbon-carbon bonds.

The balanced equation for the Grignard reaction using phenyl bromide and carbon dioxide is:

2C₆H₅Br + Mg + CO₂ → C₆H₅COOH + MgBr₂

The molar mass of phenyl bromide is 184.01 g/mol.

Therefore, 1.4555 g of phenyl bromide is equal to 0.0079 moles. The molar mass of carbon dioxide is 44.01 g/mol.

Therefore, 10 g of carbon dioxide is equal to 0.227 moles. The molar mass of magnesium filings is 24.31 g/mol.

Therefore, 0.5734 g of magnesium filings is equal to 0.0236 moles.From the balanced equation, it can be seen that 2 moles of phenyl bromide are required to react with 1 mole of carbon dioxide.

Therefore, the number of moles of phenyl bromide needed is twice the number of moles of carbon dioxide.0.227 moles of carbon dioxide is equivalent to 0.454 moles of phenyl bromide. Since only 0.0079 moles of phenyl bromide were used, it is the limiting reagent.

Learn more about limiting reagent

brainly.com/question/26905271

#SPJ11

According to the Brønsted-Lowry model, an acid and its conjugate base differ by a single proton, while a base and its conjugate acid differ by the addition of a single proton. If a reaction produces conjugate acid-base pairs, it supports this model.

To determine if the reaction supports the Brønsted-Lowry model of acids and bases, there are several questions that could be asked. Two possible questions are:

1. Does the reaction involve the transfer of protons (H+ ions) from one molecule to another.This is a key concept in the Brønsted-Lowry model, which defines acids as proton donors and bases as proton acceptors. If a reaction involves the transfer of protons, it supports this model.

2. Do the reactants and products contain conjugate acid-base pairs.

for more such questions on Brønsted-Lowry model :

https://brainly.com/question/20308475

#SPJ11

Answer:

1. Did an acid donate a hydrogen ion to become a conjugate base?

2. Did a base accept a hydrogen ion to become a conjugate acid?

In centrifugation and electrophoresis, molecules with larger mass behave differently due to the distinct principles behind these two techniques.

Centrifugation separates molecules based on their size, shape, and mass by applying a strong centrifugal force. Larger molecules with greater mass experience a higher centrifugal force, causing them to move toward the bottom of the tube at a faster rate. This is because the force acting on a molecule is proportional to its masses (Force = Mass × Acceleration). As a result, molecules with larger mass move faster in centrifugation.

On the other hand, electrophoresis separates molecules based on their size, shape, and charge in an electric field. In this technique, molecules move through a porous gel matrix. While smaller molecules can navigate through the pores more easily, larger molecules face greater resistance and move at a slower pace.

Additionally, the speed of a molecule in electrophoresis is also influenced by its charge-to-mass ratio. Molecules with a larger mass and the same charge as smaller molecules have a lower charge-to-mass ratio, making them move slower in the electric field.

In summary, molecules with larger mass move faster in centrifugation due to the greater centrifugal force they experience, while they move slower in electrophoresis because of the increased resistance and lower charge-to-mass ratio they possess.

Know more about electrophoresis here:

https://brainly.com/question/6885687

#SPJ11

The correct option is A) i and ii only. Buffer solution is an aqueous solution consisting of a weak acid and its corresponding weak base or vice versa.

The buffer solution can withstand a small amount of acid or base without significant changes in pH. A buffer solution can be made using a weak acid and its corresponding salt, or a weak base and its corresponding salt.

i. 0.10 m HF and 0.10 m NaF solution can yield a buffer solution when equal volumes of the two solutions are mixed.

ii. 0.10 m HF and 0.10 m NaOH solution can also yield a buffer solution when equal volumes of the two solutions are mixed.

iii. 0.20 m HF and 0.10 m NaOH solution cannot yield a buffer solution when equal volumes of the two solutions are mixed. This is because the HF concentration is high in this solution.

iv. 0.10 m HCl and 0.20 m NaF solution cannot yield a buffer solution when equal volumes of the two solutions are mixed. This is because neither HCl nor NaF is a weak acid or weak base.Therefore, the correct option is A) i and ii only.

for more such question on Buffer solution

https://brainly.com/question/27371101

#SPJ11

Answer:

Holding

Explanation:

keeping the item means to hold the item

Holding. Holding involves keeping the item for a short amount of time before moving it elsewhere.

While loading and unloading involve the act of adding objects to a truck or container, holding refers to the act of maintaining an item for a brief period of time before transporting it to another location.

Retaining something enables for a little interval of time to pass before it is transferred to another location.

When awaiting the arrival of a transport truck, verifying the item for damage, doing quality control checks, or arranging with other employees or departments before the item may be moved, it may be required to hold the item. When the next stage of the process is delayed or the receiving area is not readily accessible, it might also be necessary.

To know more about the holding visit:

https://brainly.com/question/29559299

#SPJ1

Sample 1 has 0.00724 mol/L of Kr, while sample 2 has 0.0406 mol of Kr.Therefore, the 5.62 L sample contains 0.0406 moles of Kr.

The given data gives the molar grouping of krypton in the underlying example. The molarity can be determined utilizing the equation, Molarity = number of moles of solute/volume of arrangement in liters. Utilizing this recipe, we get the molarity of the underlying example as 7.24 M.

Presently, we can utilize the molarity and volume of the second example to ascertain the quantity of moles of krypton in it utilizing the equation, number of moles of solute = molarity x volume of arrangement in liters. Subbing the given qualities in the recipe, we get the quantity of moles of krypton in the second example as 36.2 mol.Subsequently, there are 36.2 moles of krypton in a 5.62 L example at a similar temperature and strain as the underlying example.

To learn more temperature and pressure, refer:

https://brainly.com/question/19524022

#SPJ4

Baby's gas exchange differs from fetus gas exchange because fetus gas exchange propagates through the chorion and after birth, the gases diffuse into the alveoli. Therefore, option (d) is the correct answer here.

Fetal gas exchange: The placenta is responsible for gas exchange between mother and fetus. During pregnancy, it plays the role of the lungs, intestines and kidneys. The placenta has a chorion extension called chorionic villi, which contains small capillaries and is part of the internal organs of the body. These villi are washed in the mother's blood and gas exchange takes place in the placental region. Thus, the gas here diffuses along the chorion.

Gas exchange in babies after birth: During gas exchange, oxygen passes from the lungs to the blood. At the same time, carbon dioxide moves from the blood to the lungs. This happens in the alveoli of the lungs and is due to diffusion.The alveoli are surrounded by blood vessels, so oxygen and carbon dioxide diffuse between the air in the alveoli and the blood in the blood vessels. From the above discussion, we can say that both are differ by each other through option(d).

For more information about gas exchange , refer:

https://brainly.com/question/28152525

#SPJ4

Complete question:

how does gas exchange in a fetus differ from a baby's gas exchange after birth? (2 points)

a) in a fetus, gases diffuse across the alveoli; after birth, gases diffuse across the chorion.

b) in a fetus, gases diffuse through the ductus venosus; after birth, gases diffuse across the alveoli.

c) in a fetus, gases diffuse across the alveoli; after birth, gases diffuse through the ductus venosus. d) in a fetus, gases diffuse across the chorion; after birth, gases diffuse across the alveoli.

90.0 g of ethene is provided, which is more than the 14.025 g needed to react with 1.5 moles of oxygen in this reaction. There will therefore be some ethene left over once the reaction is finished.

In the process of respiration, six oxygen molecules combine with one glucose molecule to generate six carbon dioxide and water molecules. Equation: C6H12O6 + 6O2 6CO2 + 6H2O + Energy can be used to represent the respiration reaction.

To calculate the amount of ethene required to react with 1.5 moles of O2, we can now utilise stoichiometry:

3 moles of oxygen and 1 mole of ethene react.

1.5 moles of oxygen will react with (1/3) x 1.5 moles of ethene = 0.5 moles of ethene

Then, we can figure out how much 0.5 moles of ethene weigh:

m(ethene) = n(ethene) x Molar mass(ethene)

m(ethene) = 0.5 mol x 28.05 g/mol

m(ethene) = 14.025 g

To know more about reaction visit:-

https://brainly.com/question/28984750

#SPJ1

The gas pressure inside a container decreases when the temperature is increased. Option A is correct.

Increasing the temperature of a gas decreases its pressure due to increased average kinetic energy of the gas molecules, leading to more collisions with the container walls. When the temperature of a container rises, the gas pressure within falls. This is known as Charles's Law, which states that at a constant volume, the pressure of a gas is directly proportional to its temperature. When the temperature of a gas increases, the gas molecules gain kinetic energy and move faster, colliding more frequently with the container walls.

This increases the force of the gas molecules on the container walls, which in turn increases the gas pressure. Conversely, when the temperature decreases, the gas molecules move slower and collide less frequently with the container walls, leading to a decrease in gas pressure.

The number of gas molecules does not directly affect the gas pressure inside a container, as pressure is a function of temperature, volume, and the number of moles of gas present. However, increasing the number of gas molecules will increase the pressure if the temperature and volume are held constant. Option A is correct.

The complete question is

The gas pressure inside a container decreases when

Group of answer choices

A. The temperature is increased.

B. The number of gas molecules is decreased.

C. The number of gas molecules is increased.

D. The number of molecules is increased and the temperature is increased.

To know more about the Pressure, here

https://brainly.com/question/24085765

#SPJ4

The presence of small of quantity of hydrochloric acid inside the samples of tert-butyl chloride, is attributed to 2 motives: 1. As an impurity in the course of the synthesis of tert-butyl chloride from tert-butyl alcohol and hydrochloric acid. 2. because of the hydrolysis of tert-butyl chloride.

Hydrolysis is a chemical reaction that involves the breaking of a chemical bond in a molecule through the addition of water molecules. This process results in the formation of two or more new molecules. Hydrolysis is an important process in many biological systems, including digestion, where enzymes help break down large molecules such as proteins, carbohydrates, and fats into smaller molecules that can be absorbed and used by the body.

In hydrolysis, water molecules are used to break the bonds between the atoms in the original molecule. One part of the original molecule will gain a hydrogen ion (H+) from the water, while the other part will gain a hydroxide ion (OH-). This process can occur naturally or with the help of enzymes, which are biological catalysts that speed up chemical reactions in living organisms.

To learn more about Hydrolysis visit here:

brainly.com/question/29439050

#SPJ4

Complete Question:-

In the introduction to this experiment, the text states that small amounts of HCl are present in samples of tert-butyl chloride. Write an arrow-pushing mechanism that explains the source of the HCl.

Answer: A 0.86 mol sample of a substance is burned in a bomb calorimeter with a heat capacity of 11.23 kJ/C. The temperature increases by 14.93 C. What is ΔHrxn (in kJ/mol) for the combustion of the substance? Note: please record answer to two decimal places regardless of sig figs

To calculate the age of the rock using the radioactive isotope, we can use the formula. Whereas the age of the rock would be approximately 696.579 million years.

t = (t1/2) * log(base 2) (N0/N) Where:

t = age of the rock

t1/2 = half-life of the isotope

N0 = initial number of parent particles

N = current number of parent particles

Given that the half-life of the isotope is 300 million years, we can substitute t1/2 = 300 million years into the formula.

Also, the ratio of parent to daughter particles is 1/4, which means that for every 1 parent particle, there are 4 daughter particles. This also means that the total number of particles (parent + daughter) is 5.

Let's assume that we started with N0 parent particles. Then, the number of daughter particles would be 4N0. Therefore, the total number of particles N would be N0 + 4N0 = 5N0.

Since the ratio of parent to daughter particles is currently 1/4, the current number of parent particles is 1/5 of the total number of particles, which is (1/5)*N.

Substituting all these values into the formula, we get:

t = (300 million years) * log(base 2) (N0 / (1/5)*N0)

Simplifying the expression inside the logarithm, we get:

t = (300 million years) * log(base 2) 5

Using a calculator, we can evaluate log(base 2) 5 to be approximately 2.32193.

Substituting this value into the formula, we get:

t = (300 million years) * 2.32193

t = 696.579 million years

Therefore, the age of the rock is approximately 696.579 million years.

Learn more about Radioactive isotope here:

brainly.com/question/28039996

#SPJ4

The pH of the buffer will increase from 4.74 to 4.76 after adding 0.0020 mol of HCl. This increase in pH indicates that the buffer is able to resist the change in pH caused by the addition of an acid.

To determine the new pH of the buffer after adding 0.0020 mol of HCl, we need to use the Henderson-Hasselbalch equation, which relates the pH of a buffer to its acid dissociation constant (Ka) and the ratio of its conjugate base (A-) and acid (HA) concentrations. The equation is given as:

pH = pKa + log([A-]/[HA])

First, we need to determine the initial concentrations of CH3COOH and CH3COONa in the buffer solution. Since the buffer contains 0.50 M CH3COOH and 0.50 M CH3COONa, we can assume that the initial concentrations of CH3COOH and CH3COO- are both 0.50 M. We can then calculate the initial ratio of [CH3COO-]/[CH3COOH] as:

[CH3COO-]/[CH3COOH] = 0.50 M / 0.50 M = 1

Next, we need to determine the new concentrations of CH3COOH and CH3COO- after adding 0.0020 mol of HCl. Since the volume of the buffer is 100.0 mL or 0.100 L, the new concentration of CH3COOH ([HA]) can be calculated as:

[HA] = (0.50 M x 0.100 L) - 0.0020 mol = 0.0480 mol

Similarly, the new concentration of CH3COO- ([A-]) can be calculated as:

[A-] = (0.50 M x 0.100 L) + 0.0020 mol = 0.0520 mol

Now, we can calculate the new ratio of [CH3COO-]/[CH3COOH] as:

[CH3COO-]/[CH3COOH] = 0.0520 mol / 0.0480 mol = 1.083

Finally, we can use the Henderson-Hasselbalch equation to calculate the new pH of the buffer as:

pH = pKa + log([A-]/[HA])

pH = 4.74 + log(1.083)

pH = 4.76

For more such questions on pH

https://brainly.com/question/172153

#SPJ11

By balancing the chemical equation it is deduced that we need 70.8 mL of 2.11 M HCl reacted with 2.99 g of calcium.

To solve this problem, we need to use the balanced chemical equation between calcium (Ca) and hydrochloric acid (HCl):

Ca + 2HCl → CaCl2 + H2

From the equation, we can see that 1 mole of calcium reacts with 2 moles of hydrochloric acid. To determine the number of moles of calcium, we divide the given mass by its molar mass:

2.99 g Ca / 40.08 g/mol = 0.0747 mol Ca

Since 1 mole of Ca reacts with 2 moles of HCl, we need twice as many moles of HCl to react completely with the given amount of Ca:

2 × 0.0747 mol HCl = 0.1494 mol HCl

Finally, we can calculate the volume of 2.11 M HCl solution needed to provide this amount of moles:

The volume of HCl = moles of HCl / Molarity of HCl

Volume of HCl = 0.1494 mol / 2.11 mol/L = 0.0708 L

We convert the volume to milliliters by multiplying by 1000:

0.0708 L × 1000 mL/L = 70.8 mL

Learn more about balanced chemical equations at

https://brainly.com/question/28294176

#SPJ4