According to the Sedimentary Rock Identification Process, which sediment grain is described as "shades of yellow, milky white to hazy gray or colorless"?
rock and mineral fragments
quartz
K-feldspar
muscovite

Answers

Answer 1

Sedimentary grains described as "shades of yellow, milky white to translucent grey or colourless" are quartz.

According to the Sedimentary Rock Identification Procedure, sedimentary grains described as "shades of yellow, milky white to translucent grey or colourless" are quartz.

Quartz is a common mineral found in sedimentary rocks and comes in a variety of colours including shades of yellow, milky white, translucent grey, and colourless. It is a strong and resilient mineral that often survives weathering and erosion, making it an important ingredient in many sedimentary rock formations. 

Learn more about Sedimentary:

https://brainly.com/question/29240254

#SPJ4


Related Questions

Which country is found at 30 N latitude and 90 W longitude?
Argentina
United States
Iran
Russia
Which state is found at 40 N latitude and 110 W longitude?
Wisconsin
Arizona
Utah.
California

Answers

The country found at 30 N latitude and 90 W longitude is Mexico while

The state found at 40 N latitude and 110 W longitude is Utah.

Geography of Mexico

Mexico is located in the southern part of North America, and it has a total area of approximately 1.97 million square kilometers. United States , Belize and Guatemala are the countries it share borders with.

The geography of Mexico is very diverse with rugged mountains, high plateaus, coastal plains, and deserts.

The climate is also diverse ranging from tropical in the south to arid and temperate in the central and northern regions.

Learn more on Mexico on https://brainly.com/question/28839253

#SPJ4

According to the nebular hypothesis of planet formation, Earth is older than the Sun and was captured by the Sun's gravity the Earth and Sun formed from the same cloud of dust and gas. A meteorite struck the Sun and ejected material that coalesced to form the Earth Pluto should be a planet

Answers

According to the nebular hypothesis of planet formation the Earth and the Sun formed from the same cloud of dust and gas.

Hence, the correct answer is option b.

The nebular hypothesis is a theory that explains the formation of our solar system. According to this hypothesis, the solar system originated from a giant rotating cloud of gas and dust known as a nebula. The nebula began to collapse under its own gravity, causing it to flatten into a spinning disk. The central region of the disk, known as the protosun, grew hotter and denser, eventually igniting as the Sun.

Meanwhile, the material in the disk began to accrete and collide, forming planetesimals and protoplanets. These objects continued to grow through a process called accretion, eventually becoming the planets, moons, asteroids, and comets that populate our solar system.

Know more about nebular hypothesis here:

https://brainly.com/question/28435749

#SPJ4

The given question is not properly written. Hence, the proper question is:

According to the nebular hypothesis of planet formation_______,

a. Earth is older than the Sun and was captured by the Sun's gravity

b. Earth and Sun formed from the same cloud of dust and gas.

c. A meteorite struck the Sun and ejected material that coalesced to form the Earth

d. Pluto should be a planet

The igneous intrusion K intruded into sedimentary layer A and B
before / after (circle one) the tilt of the sedimentary layers A-H.
Explain your answer

Answers

The igneous intrusion K intruded into sedimentary layers A and B before the tilt of the sedimentary layers A-H.

This can be inferred based on the principle of cross-cutting relationships in geology. According to this principle, a rock unit (in this case, the igneous intrusion K) that cuts across or intrudes into another rock unit (sedimentary layers A and B) is younger than the rocks it intrudes.

In this scenario, the sedimentary layers A and B were already in place when the igneous intrusion K occurred. After the intrusion of K, there was a subsequent event that caused the tilt of the sedimentary layers A-H. Therefore, the intrusion of K happened before the tilting event, as it cross-cuts the sedimentary layers A and B but does not show any evidence of being affected by the tilting process.

To know more about   igneous here

https://brainly.com/question/20538428

#SPJ4

No need explanation, just give me the answer pls
5. Select all the worlds with atmospheres.
A.
Jupiter
B.
Titan
C.
Triton
D.
Ganymede
E.
Neptune
F.
Mercury
G.
Pluto
H.
Venus

Answers

The worlds with atmospheres among the options provided are:

A. Jupiter

B. Titan

C. Triton

E. Neptune

H. Venus

What is the atmospheres?

Jupiter: Jupiter is a vapor giant and the best globe in our earth. It has a dense air calm primarily of hydrogen and helium, in addition to trace amounts of added vapor to a degree poison gas, liquid, and water mist.

Titan is the best moon of Saturn and is popular for bearing a thick air. It has a nitrogen-rich air related to Earth's, in addition to meaningful amounts of poison gas. Titan's air is of excellent interest to physicists on account of allure correspondences to early Earth's air and allure potential for accommodating organic particles and potential for all time

Read more about atmospheres here:

https://brainly.com/question/24925283

#SPJ4

What is data mining? Please explain with one real-life
example.

Answers

Data mining is the process of discovering patterns and trends in large datasets. The data is often collected from a variety of sources and is used to uncover hidden relationships, anomalies, and other insights that can be used to make better decisions.

One real-life example of data mining is Amazon's recommendation system. When a customer makes a purchase on Amazon, the website collects data about the product, such as the product name, category, and price. It then uses this data to make personalized product recommendations to the customer. The system analyzes the customer's purchase history and behavior, such as the pages they've viewed and the products they've added to their cart, to determine what products they're most likely to be interested in. This process is done using data mining techniques to uncover patterns and trends in the data that can be used to make better product recommendations.

Learn more about Data mining at https://brainly.com/question/30395228

#SPJ11

In what ways do witches serve "positive" social purposes and in which ways are they manifestly "negative"? Feel free to draw on any analogies with aspects of modern US society that you can think of in formulating your answer.

Answers

The perception of witches as serving "positive" or "negative" social purposes is varied like healing, and fear respectively. We can draw analogies with modern US society across cultures, history, and so on.

Witches were often associated with practices that deviated from established societal norms and religious beliefs in the earlier days. In this sense, they were seen as a threat to social order and religion leading to negative perceptions about them.

Witches in those days were often accused of engaging in harmful magic, causing illness, misfortune, or even death. These negative associations are coming from fear, superstition, and the desire to control or eliminate practices considered outside the societal norm by the people.

In some cultural and historical contexts, witches were also revered as healers and midwives. They were believed to possess knowledge of herbal remedies, divination, and other practices that could benefit individuals or communities.

They also served as spiritual practitioners and did spiritual guidance. They do divinations, rituals etc. In these cases, witches were seen as positive contributors to society, providing services and guidance to people to help them.

Perceptions of witches as positive or negative vary across cultures. Some cultures revere witches as spiritual leaders or wise women, while others demonize them as harmful entities. This cultural variation reflects different belief systems and societal values, which also exist in modern US society, where different perspectives shape perceptions of various practices and beliefs of people.

The perception of witches has changed over time. In some historical periods, witches were regarded as threats and persecuted, while in others, they were respected as valuable community members. The reception of witches as serving "positive" or "negative" social purposes is complex and varies across cultures and historical periods.

To know more about witches-

brainly.com/question/795890

The perception of witches serving "positive" or "negative" social purposes varies across cultures and historical contexts.

What is the perception of witches serving "positive" or "negative" social purposes varies across cultures and historical contexts

Positive Social Purposes:

1. Healing and Herbalism: Throughout history, some witches have been associated with healing practices and knowledge of herbal remedies. They were often sought out for their abilities to provide natural remedies for ailments and promote well-being.

2. Community Support: Witches have sometimes been seen as providers of community support. They may offer advice, guidance, and spiritual assistance to individuals facing personal challenges or difficult life situations.

3. Knowledge and Wisdom: Witches have been depicted as possessors of esoteric knowledge and wisdom. In some societies, they were revered for their insights into nature, spirituality, and the mysteries of life.

Negative Manifestations:

1. Persecution and Witch Hunts: Witches have historically been subject to persecution and witch hunts, especially during periods like the European witch trials.

2. Dark Magic and Harm: The portrayal of witches engaging in malevolent activities, such as casting spells, cursing, or causing harm to others, has been prevalent in folklore and literature.

3. Social Outcasts and Marginalization: Witches have often been marginalized and stigmatized in societies due to their perceived association with the occult, non-conformity, or unconventional beliefs. This marginalization can lead to discrimination, ostracism, and exclusion from mainstream communities.

Drawing an analogy with aspects of modern US society, one could argue that the perception of witches shares some similarities with how certain marginalized groups or individuals are treated.

Learn more about historical contexts at https://brainly.com/question/21883512

#SPj4

Which cloud solution most equates to leasing a car terms of ease of manageability as compared to amount of control? laaS
SaaS
On-Premise PaaS.

Answers

Among the given options, the cloud solution that most equates to leasing a car in terms of ease of manageability as compared to the amount of control is Software as a Service (SaaS).

What is Software as a Service (SaaS)

SaaS is a cloud computing model where software applications are provided over the internet as a service. With SaaS, users can access and use software applications without the need for installation, maintenance, or management of the underlying infrastructure. It is similar to leasing a car because, with a lease, you have access to the car without the responsibility of owning or maintaining it.

In the context of cloud solutions, SaaS provides a high level of ease of manageability as the service provider takes care of the infrastructure, updates, and maintenance of the software application.

Learn more about cloud solution at

https://brainly.com/question/19057393

#SPJ4

1.This type pressure is required for the formation of foliations:
2.This genetic category of rocks is most susceptible to metamorphism:
3 .This red colored mineral is an index of intermediate grade metamorphism:
4.Which foliated metamorphic rock represents the highest grade of metamorphism: ;which foliated metamorphic rock represents the lowest grade of metamorphism:.

Answers

Directed pressure is required for the formation of foliations. Foliations are planar structures in metamorphic rocks that are formed by the alignment of minerals under directed pressure.

How to explain the information

Shale is the genetic category of rocks that is most susceptible to metamorphism. Shale is a fine-grained sedimentary rock that is composed of clay minerals.

Garnet is a red colored mineral that is an index of intermediate grade metamorphism. Garnet is a relatively high-temperature mineral that forms when shale is metamorphosed at temperatures of 400-600 degrees Celsius.

Gneiss is the foliated metamorphic rock that represents the highest grade of metamorphism. Gneiss is characterized by coarse-grained minerals that are arranged in alternating bands of light and dark colors. These bands are formed by the segregation of minerals during metamorphism.

Learn more about rock on

https://brainly.com/question/26046551

#SPJ4

Select all the methods used to search for exoplanets. A. Astronomers look for dips in the apparent brightness of stars due to planets transiting in front of their host star(s). B. Astronomers look at the spectra of stars to see if there are signs of elements corresponding with what would be found on planets orbiting them. C. Astronomers look for light reflected by planets from their host star(s). D. Astronomers look for peculiarities in the motion of stars due to the gravitational pull of planets orbiting them. E. Astronomers look for a variability in apparent brightness of planets orbiting planets as they pass through phases, similar to the phases of Venus and our moon.

Answers

Astronomers use a variety of methods to locate exoplanets, which are planets that orbit stars outside our solar system.

Astronomers use a variety of methods to find exoplanets. The following are the methods used to search for exoplanets:

A. Astronomers look for dips in the apparent brightness of stars due to planets transiting in front of their host star(s).

B. Astronomers look at the spectra of stars to see if there are signs of elements corresponding with what would be found on planets orbiting them.

C. Astronomers look for light reflected by planets from their host star(s).

D. Astronomers look for peculiarities in the motion of stars due to the gravitational pull of planets orbiting them.

E. Astronomers look for variability in apparent brightness of planets orbiting planets as they pass through phases, similar to the phases of Venus and our moon.

The Kepler space telescope, which was launched in 2009, has been particularly successful in detecting exoplanets. Kepler is an example of a transit photometry instrument that uses the first method above (A) to detect exoplanets.

To know more about Astronomers visit:

https://brainly.com/question/1764951

#SPJ11

Provide a detailed explanation of how the rock cycle works - include both the products (rock types) and the processes that bring about the transformation of one rock type to the next. Terminology expected in your answer includes: igneous, sedimentary, metamorphic, melting, crystallization, weathering, lithification, temperature, pressure.

Answers

The rock cycle is a continuous process in which rocks are transformed from one type to another through processes such as melting, cooling, weathering, erosion, sedimentation, and metamorphism.

The rock cycle is a continuous process that describes the transformation of rocks from one type to another through various geological processes. It involves three main rock types: igneous, sedimentary, and metamorphic.

The cycle begins with igneous rocks, which are formed from the cooling and solidification of molten magma or lava. When magma cools and solidifies underground, it forms intrusive igneous rocks with coarse-grained textures. When lava erupts onto the Earth's surface and cools quickly, it forms extrusive igneous rocks with fine-grained textures.

Weathering and erosion break down rocks on the Earth's surface, producing sediments. These sediments are transported by wind, water, or ice and eventually deposited. Through the process of lithification, these sediments become compacted and cemented together, forming sedimentary rocks.

When existing rocks are subjected to high temperatures and pressures deep within the Earth's crust, they undergo metamorphism. This process causes changes in the mineral composition and texture of the rocks, resulting in the formation of metamorphic rocks.

If metamorphic rocks are subjected to extreme heat, they may undergo melting and become magma, restarting the cycle. This melting can occur due to the increase in temperature at depth or the introduction of heat from nearby magma bodies. The magma can then cool and solidify to form igneous rocks, completing the cycle.

Learn more about rock cycle here:

https://brainly.com/question/3588472

#SPJ4

Spatial distribution of biomass: Which one of the following statements is true?
Wind have very strong effects on the spatial distribution of biota.
Compared to open stand, trees under crowded conditions tend to grow shorter.
Plants and animals have used evolutionary development and migration approaches to survive.
Moisture has very limited impact on the spatial distribution of biota.
Temperature has very limited impact on the spatial distribution of biota.

Answers

In crowded conditions, trees tend to allocate more energy to lateral growth and branching, resulting in a shorter overall height than trees in open areas.

The correct statement about the spatial distribution of biomass is: "Compared to open stands, plants in crowded conditions tend to grow shorter."

In crowded conditions, plants often face competition for resources such as light and nutrients. They, therefore, allocate more energy to vertical growth to gain available light, resulting in taller plants in open supports. In contrast, in crowded conditions, where trees are surrounded by other individuals, they tend to invest more in lateral growth and branching, which reduces overall height. 

Learn more about branching:

https://brainly.com/question/14439111

#SPJ4

Discuss the metamorphism that resulted in the formation of the
Central Zone of the Limpopo Belt including the rock types found in
the entire belt.

Answers

The Central Zone of the Limpopo Belt in southern Africa has a complicated geological past and has experienced changes in its rocks through heat and pressure.

What is metamorphism?

The Limpopo Belt is an important line that separates old and ancient land from more recent land  in the area. The Central Zone was formed by several changes and produced different types of rocks in the belt.

Greenstone Belts: The Limpopo Belt has a few groups of rocks called greenstone belts. These rocks are made up of both volcanic and sedimentary types and went through a change due to heat and pressure, but not too severe.

Read more about metamorphism  here:

https://brainly.com/question/22432772

#SPJ4

The degree to which detrital particles have had their sharp edges and corners smoothed off by abrasion is _____________.
a.
varve
b.
cross-bedding
c.
sorting
d.
rounding
e.
drift

Answers

The degree to which detrital particles have had their sharp edges and corners smoothed off by abrasion is called rounding. The abrasion occurs when the particles rub against each other during transportation.

Rounding increases as the distance of transport increases.The more a particle is transported, the smoother and more rounded its edges become. Therefore, the degree of rounding can provide clues to the depositional environment, such as whether the sediment was deposited in a high-energy or low-energy environment.

In a high-energy environment, such as a fast-moving river, the particles are transported further and experience more abrasion, resulting in a higher degree of rounding. On the other hand, in a low-energy environment, such as a lake or a swamp, the particles are not transported as far and therefore are less rounded.

To know more about rounding visit:-

https://brainly.com/question/32440954

#SPJ11

Find solutions for your homework
Find solutions for your homework
scienceearth sciencesearth sciences questions and answersanswer the following questions clearly. 1. what is the difference between magma and lava? 2. what is the dominant difference between felsic and mafic rocks? 3. what are gabbro and diorite? how do they differ? 4. how do geologists classify igneous rocks? 5. what is bowen reaction series?
Question: Answer The Following Questions Clearly. 1. What Is The Difference Between Magma And Lava? 2. What Is The Dominant Difference Between Felsic And Mafic Rocks? 3. What Are Gabbro And Diorite? How Do They Differ? 4. How Do Geologists Classify Igneous Rocks? 5. What Is Bowen Reaction Series?
Answer the following Questions Clearly.
1. What is the difference between magma and lava?
2. What is the dominant difference between felsic and mafic rocks?
3. What are Gabbro and Diorite? How do they differ?
4. How do geologists classify igneous rocks?
5. What is Bowen Reaction Series?

Answers

1. The main difference between magma and lava is their location. Magma is molten rock beneath the Earth's surface, while lava is magma that reaches the Earth's surface during a volcanic eruption.

2. The dominant difference between felsic and mafic rocks is their mineral composition. Felsic rocks have a higher percentage of silica (SiO2) and aluminum (Al2O3), while mafic rocks have higher levels of iron (Fe) and magnesium (Mg).

3. Gabbro and diorite are both intrusive igneous rocks. Gabbro is composed mainly of dark-colored minerals like pyroxene and plagioclase feldspar, while diorite consists of a combination of dark and light minerals such as amphibole and plagioclase feldspar. The main difference is in their mineral composition.

4. Geologists classify igneous rocks based on their mineral composition, texture (grain size and arrangement), and origin (intrusive or extrusive). This classification helps in understanding the rock's formation processes and provides insights into the Earth's history and geologic activity.

5. The Bowen Reaction Series is a sequence of mineral crystallization in cooling magma or lava. It shows the order of minerals that form as the magma/lava cools and their respective temperatures of crystallization. The series demonstrates how minerals with higher melting points solidify first, followed by those with lower melting points, providing insights into the formation of different igneous rock types.

Learn more about Bowen Reaction Series here:

https://brainly.com/question/13431170

#SPJ4

The given question is not properly written. Hence, the proper question is:

"Answer the following Questions Clearly.

1. What is the difference between magma and lava?

2. What is the dominant difference between felsic and mafic rocks?

3. What are Gabbro and Diorite? How do they differ?

4. How do geologists classify igneous rocks?

5. What is Bowen Reaction Series?"

Bridget has been living in the in the southern portion of France for her entire life. Bridget is determined to make sure her children know everything about the community where they live. She tells them stories about the important people who founded the town, and she sings them traditional songs before bed. She also explains the importance of the festivals celebrated in the region.

What type of culture is Bridget passing on to her children?

A. subculture
B. local culture
C. popular culture
D. universal culture

Please select the best answer from the choices provided

A
B
C
D

Answers

The best response from the list of options is B. local cultures. 

In the southern region of France, where she resides, Bridget is imparting the customs, history, and values unique to her neighborhood. She imparts a feeling of the local culture to her kids by telling tales about the town's founders, singing old songs, and discussing the significance of regional events. This refers to the distinctive habits, beliefs, and customs that are particular to a given area or community.

List the three natural disasters that cause the most deaths in the U.S. since 1986. Tornados, Storm Surge, Floods Floods, Winter Weather, Heat/Drought Floods, Tornadoes, Winter Weather Heat/Drought, Floods, Tornados Winter Weather, Tornados, Storm Surge

Answers

Three natural disasters that cause the most deaths in the U.S. since 1986 are Tornados, Storm surges, and Floods.

Any disaster with ties to natural risks is considered a natural disaster. A natural disaster can result in human casualties or property destruction, and it frequently leaves behind economic losses. The extent of the destruction depends on the population's fortitude and the infrastructure's condition.

All forms of severe weather, that have the potential to pose a serious threat to property, vital infrastructure, and homeland security, are considered natural disasters.

A natural disaster is an unplanned incident that hurts society. Natural catastrophes frequently cause damage to both the environment and the population.

Learn more about natural disasters here:

https://brainly.com/question/31291718

#SPJ4

The different seasons happen due to the following reasons (choose all the best answers)
The 23.500 of the Earth's as sometimes causes one hemisphere to receive longer hours of sunlight per day compared to the other hemisphere
The Earth's orbit sometimes brings it closer to the Son than in other times
Over the year the fit of the Earm's axis of rotation varies from 23.5 to 0 in such a way as to bring more heating per hour in the summer than is the winter The 235 of the Earth's sometimes causes on hemisphere to receive more concentrated sunlight during daylight hours while the other hemisphere receives more spread out and weaker sunlight
The 225 ill of the Earth's as sometimes cames one hemisphere to be significantly closer to the Sun than the other hemisphere

Answers

The correct statements among the options provided are:

1. The tilt of the Earth's axis of rotation varies from 23.5 to 0 in such a way as to bring more heating per hour in the summer than in the winter.

2. The tilt of the Earth's axis sometimes causes one hemisphere to receive longer hours of sunlight per day compared to the other hemisphere.

What are the causes of different seasons?

These two factors are the primary reasons for the occurrence of different seasons on Earth:

1. The tilt of the Earth's axis: The Earth's axis is tilted at an angle of approximately 23.5 degrees relative to its orbit around the Sun. This tilt results in varying exposure to sunlight as the Earth orbits the Sun. When one hemisphere is tilted toward the Sun, it receives more direct sunlight and experiences longer daylight hours, leading to warmer temperatures and

2. The Earth's orbit: The Earth's orbit around the Sun is not perfectly circular but slightly elliptical. However, the distance between the Earth and the Sun during different seasons is not the primary cause of the seasonal variations. The tilt of the Earth's axis is the dominant factor responsible for the seasons.

Learn more about axis of rotation at https://brainly.com/question/14696535

#SPJ4

List three factors that regulate the amount of O2 available
for organisms and roots in the soil,
and briefly explain the mechanism for each.

Answers

The factors that regulate the amount of O2 available for organisms and roots in the soil are soil moisture content, soil structure and soil temperature.

What is soil moisture content

Soil moisture talks about the amount of water present in the soil and this is affected by the level of precipitation. The more the soil moiture in the soil, the lower the available oxygen available for the organism.

Also, the soil structure which talks about soil arrangement affects oxygen availability because a soil with large more pore spaces will have more oxygen present in it.

Learn more on oxygen availability in soil on https://brainly.com/question/31917619

#SPJ4

point Which of the following statements is TRUE if the rocks on either side of an earthquake-prone fault become stronger? nothing changes The next time an earthquake happens, it will have a smaller moment magnitude. The fault can now hold a smaller amount of stress before it slips in an earthquake The fault can now hold a larger amount of stress before it slips in an earthquake

Answers

If the rocks on either side of an earthquake-prone fault become stronger, the TRUE statement is: The fault can now hold a larger amount of stress before it slips in an earthquake. Therefore, option C is correct.

In the context of earthquakes, a fault is a zone of weakness where seismic activity occurs. The strength of the rocks on either side of the fault is crucial in determining the behavior of the fault during an earthquake.

If the rocks become stronger, it means they have a higher resistance to stress and can withstand a larger amount of stress before slipping and causing an earthquake.

This increased strength of the rocks can impact the overall seismic activity and the potential size or magnitude of earthquakes along the fault line.

Learn more about earthquake here:

https://brainly.com/question/29500066

#SPJ4

Most probably, your complete question is here:

Which of the following statements is TRUE if the rocks on either side of an earthquake-prone fault become stronger?

A. nothing changes.

B. The next time an earthquake happens, it will have a smaller moment magnitude.

C. The fault can now hold a smaller amount of stress before it slips in an earthquake.

D. The fault can now hold a larger amount of stress before it slips in an earthquake.

What is unique about the plate tectonic setting of Iceland?
The magma that feeds Icelandic volcanoes comes straight from Earth's inner core and that is indeed rare
Iceland formed as a result of collision between two continental plates that have long been destroyed by plate subduction process.
Iceland has all three plate boundaries within a small geographic region.
The Iceland is essentially a manifestation of a mid-ocean ridge that is exposed on land.

Answers

Iceland is located on the Mid-Atlantic Ridge, which is a divergent plate boundary where the North American and Eurasian tectonic plates are moving apart.

This makes Iceland unique because it is essentially a manifestation of a mid-ocean ridge that is exposed on land. The volcanic activity in Iceland is associated with the spreading of the tectonic plates, resulting in the formation of new crust.

In addition to the divergent boundary, Iceland also experiences the effects of a transform boundary, where the plates slide horizontally past each other. This is evident in the presence of numerous active faults and fractures across the island.

Furthermore, Iceland is influenced by the subduction zone boundary, where the Eurasian plate is subducting beneath the North American plate in the northern part of the country. This subduction process is responsible for the formation of volcanic arcs and stratovolcanoes.

The combination of these three plate boundaries within a relatively small geographic region makes the plate tectonic setting of Iceland unique and gives rise to its distinctive volcanic activity and geothermal features.

Learn more about the Mid-Atlantic Ridge:

brainly.com/question/30650450

#SPJ4

The current population of Tanzania is 50.3 million with a population growth rate of 2.14% per year. The average annual agricultural yield in Tanzania is 8,670 kg/ha (where "ha" means hectare, which you can think of as a metric acre), a yield that is comprised of both grains (e.g. maize/corn) and tubers of about 1.5% per year for the last five years or so. Ideally, one person should have a caloric intake of at least 2000kcal per day in order to maintain their 1 kg grain supplies 3000 kcal; 1 kg tubers supplies 1000 kcal. Use the equations from our mini-lecture and the linear growth equation from the last module quantitative assignment, to answer the following questions. You will also have to do some conversions for which you won't find specific equations. answer to one place past the decimal and put your answer in "millions", so that if your answer is 55,670,000 your answer is 55.7 Million and yould enter 55.7 as your answer. Answer: 56.6

Answers

The sufficiency of caloric intake in Tanzania is approximately 200.7%, indicating that the total grain and tuber yield surpasses the daily caloric requirement of the population.

To calculate the answers, let's break down the given information and perform the necessary calculations:

Total grain yield: The average annual agricultural yield in Tanzania is 8,670 kg/ha. Considering a population of 50.3 million, we need to convert hectares to the total area required. Assuming one person requires 1 kg of grain (3,000 kcal), the total grain yield would be:

Total grain yield = Population × Grain yield per person

Total grain yield = 50.3 million × (1 kg/person) = 50.3 million kg

Total tuber yield: The average annual agricultural yield includes both grains and tubers, with a growth rate of 1.5% per year. We can calculate the total tuber yield similarly to the grain yield, considering one person requires 1 kg of tubers (1,000 kcal):

Total tuber yield = Population × Tuber yield per person

Total tuber yield = 50.3 million × (1 kg/person) = 50.3 million kg

Total caloric intake: To determine if the caloric intake meets the daily requirement, we need to convert the total grain and tuber yield into kilocalories (kcal) and compare it to the population's needs:

Total caloric intake = (Total grain yield × Grain kcal) + (Total tuber yield × Tuber kcal)

Total caloric intake = (50.3 million kg × 3,000 kcal/kg) + (50.3 million kg × 1,000 kcal/kg)

Total caloric intake = 151.5 billion kcal + 50.3 billion kcal

Total caloric intake = 201.8 billion kcal

Daily caloric requirement: The daily caloric requirement for the population can be calculated as follows:

Daily caloric requirement = Population × Daily caloric intake per person

Daily caloric requirement = 50.3 million × 2,000 kcal/person = 100.6 billion kcal

Sufficiency of caloric intake: To determine if the caloric intake meets the daily requirement, we compare the total caloric intake to the daily caloric requirement:

Sufficiency of caloric intake = (Total caloric intake / Daily caloric requirement) × 100

Sufficiency of caloric intake = (201.8 billion kcal / 100.6 billion kcal) × 100

Sufficiency of caloric intake ≈ 200.7%

Learn more about the Tanzania:

brainly.com/question/33278083

#SPJ4

Describe key global factors or trends that have hindered progress in achieving global drinking water coverage. Explain in detail how each factor derails efforts to expand water service, and for each one, cite at least one example from outside the U.S. that exemplifies the challenges of achieving universal water access.

Answers

Key global factors or trends that have hindered progress in achieving global drinking water coverage include population growth, urbanization and contamination.

The global population has been steadily increasing, leading to greater demands for water resources. This puts pressure on existing water sources, making it difficult to meet the increasing demand for drinking water. The lack of proper planning and investment in water supply systems for urban areas has hindered progress in providing access to safe drinking water for urban populations.

Many regions across the globe are experiencing water scarcity due to various factors such as climate change, droughts, and overexploitation of water resources. Water pollution from industrial activities, inadequate wastewater treatment, agricultural runoff, and improper disposal of waste can contaminate water sources, making them unsafe for drinking.

Know more about drinking water here

https://brainly.com/question/29443114

#SPJ4

If all the ice in the Greenland and Antarctica ice sheets melted, by approximately how much would global sea level rise around the world? 27 m 55 m 77 m 7 m 17 m

Answers

If all the Ice in the Greenland and Antarctica ice sheets melted, by approximately 77m the global sea level would rise around the world. The correct option is c.

If all of the ice in the Greenland and Antarctic ice sheets melted, global sea level would increase by around 77 meters. The fundamental cause of the increase in melting of ice sheets in Antarctica, Greenland, and glaciers is global warming and climate change, which is mostly caused by increased greenhouse gas emissions from unsustainable human activities.

If glaciers melt, sea level rise will be uneven and may vary from place to place. Though not as soon as possible, if all of Greenland's ice melts, global sea level will increase by around 7 meters around the planet. If all of the Antarctic ice melts, global sea level will rise by around 70 meters.

Learn more about sea level, here:

https://brainly.com/question/32331702

#SPJ4

sandstone contains abundant feldspar, suggesting that the sand was derived by weathering and erosion of granitic bedrock. Quartz-rich Oolitic Arkosic Lignitic

Answers

Arkosic  Sandstone contains abundant feldspar, suggesting that the sand was derived by weathering and erosion of granitic bedrock.

What is the sandstone?

Quartz-rich means that there is a lot of quartz in the sandstone, which is a mineral commonly found in sandstones. Olitic means having small round grains called ooids in a type of rock or sediment. These small round particles are usually made of calcium carbonate or silica.

Note that Arkose is a kind of rock made of sand that has lots of feldspar grains, quartz, and other minerals. It is usually linked with the breaking down of granite or transformed rocks due to weather.

Read more about sandstone here:

https://brainly.com/question/980701

#SPJ4

Which one of the following statements is true?
Fire can be good for the maintenance of forests.
Edaphic factor has no influences on fauna.
Some stable substances (such as DDT) and heavy metals (such as mercury and lead) become concentrated at higher levels of a food chain. This is a good thing for the biota.
In a food pyramid, the total number of organisms tends to decrease as one travels down the trophic levels

Answers

The statement is true is that In a food pyramid, the total number of organisms tends to decrease as one travels down the trophic levels.

What is food pyramid

In a food pyramid, the total number of organisms decreases as one moves down the trophic levels this is because energy is lost at each trophic level as it is transferred from one organism to another.

The little fraction of the energy consumed by an organism is converted into biomass that is available for the next trophic level. Hence, the number of organisms decrease as one goes down the trophic levels, since there is no energy large enough for the large population at higher levels.

Learn more on food pyramids https://brainly.com/question/1477479

#SPJ4

What is the stability of the environment in the environmental temperature profile
below from 0-5km? Assume the parcel at the surface is unsaturated.
a. Stable
b. Unstable
c. Neutral
d. There is not enough information to answer this question..

Answers

The stability of the environment in the environmental temperature profile

below from 0-5km? Assume the parcel at the surface is unsaturated is b. Unstable

How to explain the information

The stability of the environment is determined by the environmental lapse rate, which is the rate at which the temperature of the atmosphere decreases with altitude. If the environmental lapse rate is less than the dry adiabatic lapse rate, then the environment is unstable.

This means that an unsaturated air parcel that is lifted will cool at a slower rate than the surrounding air, causing it to become buoyant and rise further.

In the environmental temperature profile given in the question, the temperature decreases from 20°C at the surface to 16°C at 5 km.

Learn more about environment on

https://brainly.com/question/24182291

#SPJ4

Exercise 3. Proferred orientation a) Read in the book chapter 7.4.2. b) The TA hands out 4 metamorphic rocks that show a preferred orientation of the mineral grains. 1.) phyllite 2.) slate , 3.) schis

Answers

1) Phyllite: Phyllite exhibits a preferred orientation of mineral grains.

2) Slate: Slate shows a preferred orientation of mineral grains.

3) Schist: Schist displays a preferred orientation of mineral grains.

4) Gneiss: Gneiss exhibits a preferred orientation of mineral grains.

1)  Phyllite is a low-grade metamorphic rock that displays a preferred orientation of fine-grained minerals, such as mica and chlorite. This alignment of minerals creates a characteristic foliation or layering within the rock.

2) Slate is a fine-grained metamorphic rock that also exhibits a preferred orientation of mineral grains. This orientation gives rise to a property known as "slaty cleavage," which allows slate to be easily split into thin, flat sheets.

3)  Schist is a medium- to high-grade metamorphic rock that has a well-developed foliation resulting from the alignment of larger mineral grains. This alignment gives schist its characteristic rough texture and planar foliation known as schistosity.

4) Gneiss is a high-grade metamorphic rock that displays distinct bands or layers of different minerals. These bands result from the preferred orientation of mineral grains within the rock, creating a banded appearance known as gneissic foliation.

To learn more about Phyllite here

https://brainly.com/question/32868847

#SPJ4

The complete question is:

The TA hands out 4 metamorphic rocks that show a preferred orientation of the mineral grains. 1.) phyllite 2.) slate , 3.) schist 4 )Gneiss

List the three natural disasters that cause the most deaths in the U.S. since 1986:
A)Tornados, Storm Surge, Floods
b)Floods, Winter Weather, Heat/Drought
c)Floods, Tornadoes, Winter Weather
d)Heat/Drought, Floods, Tornados
e)Winter Weather, Tornados, Storm Surge

Answers

The three natural disasters that cause the most deaths in the U.S. since 1986: Tornados, Storm Surge, and Floods. Thus. option A is appropriate.

Any disaster with ties to natural risks is considered a natural disaster. A natural disaster can result in human casualties or property destruction, and it frequently leaves behind economic losses. The extent of the destruction depends on the population's fortitude and the infrastructure's condition.

All forms of severe weather, that have the potential to pose a serious threat to property, vital infrastructure, and homeland security, are considered natural disasters.

A natural disaster is an unplanned incident that hurts society. Natural catastrophes frequently cause damage to both the environment and the population.

Thus, option A is correct.

Learn more about Natural Disaster here:

https://brainly.com/question/31291718

#SPJ4

17-According to Hudson, the present-day outline of the Great Lakes was formed roughly how many years ago?
Group of answer choices
9,000 years
2,700 years
4,800 years
4,000 years
7,200 years
23- According to Hudson (Chapter 14), which of the following is TRUE?
Group of answer choices
Basic Oxygen Process mixes molten pig iron with scrap steel in a furnace which pure oxygen is blown into under low pressure
Andrew Carnegie bought the United States Steel Company from J. P. Morgan and created the industrial city of Gary, Indiana
In the early 2000’s, India invested in North American steel mills and made large iron ore purchases
US and Canadian steel producers were quick to adopt the innovations that appeared in Germany and Japan following WWII
The automobile industry in the Lower Great Lakes region and the Ohio Valley now rely on electric furnace minimills for steel production

Answers

17. According Hudson, to the present-day outline of the Great Lakes was formed roughly 9,000 years ago. Option A is the correct option.

23. According to Hudson ( Chapter 14), True, Basic Oxygen Process mixes molten pig iron with scrap steel in a furnace which pure oxygen is blown into under low pressure.

The Great Lakes

The Great Lakes are a group of five connected freshwater lakes in border between the United States and Canada: Lake Superior, Lake Michigan, Lake Huron, Lake Erie, and Lake Ontario. The Great Lakes play a crucial role in the economy, ecology, and recreation of the surrounding regions, including, fishing, and waterfront tourism.

Learn more about the great lakes here

https://brainly.com/question/26111518

#SPJ4

What is "Bowen ratio"? Include a small chart identifying the Bowen ratio of different land surfaces (water, ice, tropical forest, grassland, crops, desert, tundra). Imagine that a site is covered in crops. Half the site is watered daily. The other half is left to dry out. What happens to the Bowen ratio of the crops that are watered daily relative to the ratio when they are left to dry?

Answers

When crops are watered daily, the increased humidity increases evaporation, resulting in a greater contribution from latent heat flux and a lower Bowen ratio than when the crop is dry.

The Bowen ratio is a measure of the ratio between the sensible heat flux (heat transfer by conduction and convection) to the latent heat flux (heat transfer by evaporation) over the Earth's surface. A higher Bowen ratio indicates the dominance of the sensible heat flux, while a lower ratio indicates the dominance of latent heat flux.

The following table shows Bowen's ratios for different soil surfaces:

Water: Low Bowen Rate

Stone: High Bowen Rate

Tropical forest: Low Bowen Rate

Meadow: Intermediate Bowen Ratio

Crops: Intermediate Bowen Ratio

Desert: High Bowen Rate

Tundra: High Bowen Rate

If an area with crops is divided into two halves, with one half irrigated daily and the other half allowed to dry, the Bowen ratio of the crops watered daily is reduced compared to when they are dry. An increase in humidity due to daily watering will increase evaporation, resulting in a greater contribution of latent heat flux and a lower Bowen ratio. 

Learn more about evaporation:

https://brainly.com/question/25310095

#SPJ4

Other Questions
8. What must be the velocity of flow of the most efficient trapezoidal canal with side slopes. of 3/4:1 and to carry a discharge of 32.4 m/s on a grade of 1 m per km. Use n=0.013 you may use the C++ Tool to solve this problem. Click HERE to start C++ Tool in LockDown. Write a C++ program that reads the user's name and his/her body temperature for the last three hours. A temperature value should be within 36.0 and 42.0 Celsius. The program calculates and displays the maximum body temperature for the last three hours and if he/she is normal or might have COVID19. The program must include the following functions: 1. Max Temp() function takes three temperature values as input parameters and returns the maximum temperature value2. COVID19() function takes the maximum temperature value and the last temperature value as input parameters, and displays if the user might have COVID10 or not according to the following instructions: -If the last temperature value is more than or equal to 37,0, then display "You might have COVID19, visit hospital immediately -Else if the maximum temperature value is more than or equal to 37.0 and the last temperature value is less than 37.0, theri display "You are recovering! Keep monitoring your temperature! -Otherwise, display "You are good! Keep Social Distancing and Sanitize! 3. main() function: -Prompts the user to enter the name. -Prompts the user to enter a temperature value from 36.0-42.0 for each hour separately (3hrs), if the temperature value is not within the range, it prompts the user to enter the temperature value again. Calls the Max Temp() function, then displays the user name and the maximum temperature value. Calls the COVID19() function. Project A has an expected duration of 48 days and a standard deviation of 4 days. What is the probability of completing the project within 56 days ? When Nisbet and Schacter (1996) asked their participants why they had accepted as much electric shock as they had, the participantsGroup of answer choiceshesitantly guessed as to what they must have been thinking but acknowledged that they were not sure.were unable to provide answers to explain their behavior.confidently, but inaccurately, reported the causes of their behavior.correctly reported the content of their thought processes. Determine the diameters of the pipes in the discharge line if Q design = 500 GPM (use the Darcy-Weisbach method). Determine the dimensions of the buffer tank. Also, calculate the power of the pump (Efficiency=70%, depth 80 feet); factor a calculated factor of safety into your pump TDH calculations. The pressure at the discharge point is 5 m. The friction factor for PVC is 0.016, and for steel it is 0.022. Which strategy for allocating scarce resources is best described by the scenario below?Congress votes to allocate additional funds to space exploration.Majority RuleLotteryAuthorityContest A 350 resistor, an uncharged 2.5F capacitor, and a 3V battery are connected in series. (a) What is the initial current? (b) What is the RC time constant? (c) What is the current after one time constant? (d) What is the voltage on the capacitor after one time constant? a. The initial current through the circuit is mA. b. The RC time constant is ms. c. The current through the circuit after one time constant is mA. d. The voltage on the capacitor after one time constant is V. The label on a battery-powered radio recommends the use of a rechargeable nickel-cadmium cell (nicads), Ithough it has a 1.25-V open-circuit voltage, whereas an alkaline cell has a 1.58-V open-circuit voltage. he radio has a 3.2 resistance. a. With a nicad cell, having an internal resistance of 0.04, what is the voltage supplied to the radio, if a single nicad cell is used? The voltage supplied to the radio is V. b. With an alkaline cell, having an internal resistance of 0.2, what is the voltage supplied to the radio, if a single alkaline cell is used? The voltage supplied to the radio is V. c. The radio's effective resistance is lowered when its volume is turned up. At what value of radio's resistance does a nicad cell begin to supply a greater voltage to the radio than an alkaline cell? When the radio has an effective resistance of or smaller, a greater voltage can be obtained with a nicad cell. How do these seminal documents reflect American democratic values? Your organization employs 100,000 people. The new CEO wants that the company becomes more innovative. The new HR consultant recommends to the CEO to establish a competitive culture in the corporation so that all managers and employees would compete against each other. What advice would you offer to the CEO, and why? As part of your answer, please explain the concepts of the anaclitic depression, and others. How do you see these two issues, competition and cooperation, play out during the recent Coronavirus pandemic, in the leadership of the United States and worldwide? Plot an undirected graph with 5 vertices using adjacency matrix. Plot a directed graph with 6 vertices using adjacency matrix. Plot an undirected graph with 7 vertices using edge list. Whyis ee COP of a reciprocating compressor better than a screwcompressor that gets oil injected to cool the ammonia gas, youwould think that the gas is cooled by the oil that it requires lessenerg Product A is assembled purely using manual assembly process. The standard time for the product is 42 min per unit. The company is currently employing 11 operators and having a working period of 9 hours per day with 20 days per month. The company is planning to produce 3110 units of output per month. The overtime is executed 3 hours every day and limited to only 15 days per month. Overtime payment rate is RM15 per hour. Evaluate the situation using standard time approach and propose the number of operators per day required for overtime work to meet the production output. Which explains whether or not the graph represents a direct variation?The graph has a constant of variation of 3, so it represents a direct variation.The graph has a slope of 3, so it represents a direct variation.The graph has a positive slope, so it does not represent a direct variation.O The graph does not begin at the origin, so it does not represent a direct variation.Save and0 Plsss helpA team of researchers is testing the hypothesis that taking a break every hour to do 1 minute ofphysical activity can reduce stress. They randomized 100 full-time employees between atreatment group and a control group. The treatment group was instructed to take a 1-minutebreak every hour at work to do some sort of physical activity. At the beginning and end of thestudy, each participant took the Psychological Strain Questionnaire (PSQ), which measuresstress at work. The higher the PSQ score, the less stress the employee feels.Researchers found that the change in PSQ scores for the treatment group was 10 points higherthan the change in PSQ scores for the control group. To test whether the results could beexplained by random chance, the researchers performed a simulation analysis. The summary of2000 re-randomizations of their data is recorded below.Mean Standard Deviation05.204What is a good estimate for the expected margin of error for the simulation results?05.2A) 5.2B) 7.8C)10.4D)13.0 Are you aware of the 21st Century skills, and its importance?How did you learn or came across this? Hampton Industries had $37,000 in cash at year-end 2020 and $19,000 in cash at year-end 2021. The firm invested in property, plant, and equipment totaling $210,000 the majority having a useful life greater than 20 years and falling under the alternative depreciation system. Cash flow from financing activities totaled +$140,000. Round your answers to the nearest dollar, if necessary.What was the cash flow from operating activities? Cash outflow, if any, should be indicated by a minus sign.$If accruals increased by $10,000, receivables and inventories increased by $150,000, and depreciation and amortization totaled $31,000, what was the firm's net income?$ Question 1Lean Six Sigma can improve the efficiency of processes, improve the quality of service to citizens, and reduce the costs of providing these services. The author of this case study worked with a local governments financial administration department to implement Lean Six Sigma. The goal of the project was to streamline the processes and subsequently reduce the financial process cycle time. The city is a 7000-citizen municipality in the state of New York. It is a city manager form of government where the city manager manages the city employees and implements policy defined by the mayor and city council members. The finance director reports to the city manager and is responsible for developing and managing the financial budgets, the financial processes, the mayors court processes, income tax collection, utility billing, and collection processes.The financial processes include payroll, purchasing and accounts payable, accounts receivable, monthly reconciliation, and budgeting. The finance clerk generates paychecks for administrative personnel, the police department, the fire department, the public works department, and the city council. The International Union of Fire Fighters (IUFF) represents the firefighters who require union dues to be held from the members pay once a month to be submitted to the union. The processing also includes pension matching, making pension payments, and reporting. The payroll department also processes income tax payments, garnishments, child support, and other withholdings to the appropriate agencies. Employees receive paychecks every two weeks. Pension reporting is performed on a monthly basis. The customers of the payroll process are internal city employees and external agencies that receive withholding payments and reports. The financial director realizes that the current processes, with respect to the processes before the Lean Six Sigma program is implemented, are inefficient, error-prone, lengthy, and have an extensivenumber of nonvalue-added steps. The entire payroll, pension reporting, and withholding payment process takes 13-70 employee hours per pay period, depending on if information processing problems occur.The purchasing and accounts payable processes enable city personnel to purchase materials, products, and services to run the city. Purchase requisitions are generated by personnel. The finance clerk generates the purchase order, which is then approved by the city manager, the finance director, and the city council, if necessary. Invoices are received by the finance director and processed by the finance clerk, with the appropriate approvals and signatures. Payments to vendors are frequently late. Multiple invoices for the same payment are frequently received and must be reviewed to determine if they have been paid.The up-front purchasing process takes approximately 7-10 days to generate and approve the purchase orders after the approved purchase requisition is received. The purchase orders are filed until the invoices are received. The entire accounts payable process takes approximately two weeks to process a batch from initial invoice receipt to vendor payment.The finance clerk records revenue receipts and deposits revenue checks into the bank. In the current process, there is a lag between when the revenue checks are received in the finance department and when they are entered into the financial system and deposited into the bank due to process inefficiencies and workload capacity issues.The finance clerk is responsible for reconciling the financial records on a monthly basis. Reconciliation includes comparing the bank statements for the payroll account, a general account, and several investment accounts, to the financial system entries. Due mainly to process inefficiencies or workload capacity issues (or both), monthly reconciliation currently is rarely performed in a timely manner. Sometimes the finance director reconciles the books and other times it is outsourced to an accountant. The finance director is responsible for managing the budgeting process throughout the city. He receives budget requests from department managers, consolidates them into a city budget, prepares budget reports for state and county agencies, and makes budget journal entries into the financial information system.The finance director is also responsible for ensuring that expenditures are within the approved budgets, as well as providing budget information to city management. There are some training issues with respect to using the financial system for budgeting, as well as duplicate data entry into multiple information systems. The financial information system is also limited with respect to a user-friendly ad-hoc budget reporting system. A 4ft hollow cylinder fixed at one end is subjected to a Load 1500lb at the other end perpendicular to the longitudinal axis with inner and outer diameter equal to 3.2in and 4.0in respectively. Determine the maximum shear stress (psi) in the cylinder. Discuss the sterilization method currently used for metal alloys. What are the constraints (conditions) of RAOULTs law?