a compound contains only iron and oxygen. if the compound is 72.34% fe by mass, what is the empirical formula for the compound?

To solve this problem, we can use the formula for radioactive decay and after 4 half-lives, there will be 6,250 atoms of uranium remaining for Parents and  93,750 atoms of lead produced for daughters.

The formula is [tex]N = N0 * (1/2)^{(t/t1/2)} ^[/tex]

where N is the final amount, N0 is the initial amount, t is the time elapsed, and t1/2 is the half-life of the radioactive isotope.

Given that the half-life of the uranium-lead (U-Pb) system is 1.6 billion years, the time required for 4 half-lives to occur is:

t = 4 * t1/2 = 4 * 1.6 billion years = 6.4 billion years

Therefore, it would take 6.4 billion years to get through these 4 half-lives.

Using the formula for radioactive decay, we can calculate the amount of uranium and lead remaining after 4 half-lives have occurred, starting with 100,000 atoms of uranium:

For the parents (uranium):

[tex]N = N0 * (1/2)^{(t/t1/2)} ^ = 100,000 * (1/2)^4 = 6,250[/tex]atoms

Therefore, after 4 half-lives, there will be 6,250 atoms of uranium remaining.

For the daughters (lead):

[tex]N = N0 - (N0 * (1/2)^{(t/t1/2)} = 100,000 - 6,250 = 93,750[/tex] atoms

Therefore, after 4 half-lives, there will be 93,750 atoms of lead produced.

Learn more about Radio Active Decay here:

https://brainly.com/question/23743292

#SPJ4

Tar is not a lucrative unconventional reserve as it is not easy to extract tar sands.

The given statement is referring to tar sands (oil sands) which is a group of sedimentary rocks containing sand, clay, water, and a thick, molasses-like substance called bitumen (tar). Tar sand is the residue of larger molecules left behind after microbes attack existing underground oil reserves. Tar sand is found in sand or sandstone that contains high concentrations of macerals (complicated carbon molecules). It is not easy to extract tar sands as it requires expensive extraction methods that are not yet viable due to low oil prices. Therefore, it is not a lucrative unconventional reserve.

More on tar sand: https://brainly.com/question/31115721

#SPJ11

Answer: yes

Explanation: Petroleum solvents are hydrocarbon mixtures which can be grouped into three broad categories on the basis of their boiling ranges and solvent strengths, as follows: special boiling range solvents, boiling range, 30-160 oC; white spirits, 130-220 oC; and high-boiling aromatic solvents, 160-300 oC.

The titration curves for a strong acid and a weak acid titrated with a strong base will be different.

For a strong acid, the pH will rapidly increase as the strong base is added, until it reaches the equivalence point where all the acid has been neutralized. At this point, the pH will be neutral (pH=7) since the strong acid has been completely converted to its conjugate base. The titration curve will be a steep, linear rise.

For a weak acid, the pH will initially rise slowly as the weak acid reacts with the strong base. As more base is added, the pH will increase more rapidly until it reaches the equivalence point, where the pH will be greater than 7 due to the presence of the conjugate base of the weak acid. The titration curve will be a gradual, curved rise.

Additionally, the equivalence point for the weak acid will occur at a higher pH value than that for the strong acid, since the weak acid will not be completely converted to its conjugate base at the equivalence point. The titration curve for the weak acid will also have a buffer region, where the pH will change only slightly as small amounts of strong base are added, due to the buffering action of the conjugate acid-base pair.

To know more about titration curves here

https://brainly.com/question/28207024

#SPJ4

The pH of the resultant solution is 3.16.

To determine the pH of the resultant solution after mixing the two solutions, we need to calculate the concentrations of all the ions present in the final solution.

First, let's calculate the moles of HCl added;

moles of HCl = concentration x volume = 0.050 M x 0.010 L = 0.00050 moles

Next, we need to calculate the moles of NaNO₂ and HNO₂ in the 20.0 mL solution;

moles of NaNO₂ = concentration x volume = 0.10 M x 0.020 L = 0.0020 moles

moles of HNO₂ = concentration x volume = 0.10 M x 0.020 L = 0.0020 moles

Since NaNO₂ is a salt and dissociates completely in water, it will provide Na⁺ and NO₂⁻ ions in solution. HNO₂, on the other hand, is a weak acid that will partially dissociate into H⁺ and NO₂⁻ ions. The equilibrium reaction for the dissociation of HNO₂ is;

HNO₂ + H₂O ⇌ H₃O⁺ + NO₂⁻

The acid dissociation constant, Ka, for HNO₂ is 4.5 x 10⁻⁴.

Let's assume x is the concentration of H⁺ ions produced by the dissociation of HNO₂. The NO₂⁻ concentration will be equal to the initial concentration of HNO₂ (0.10 M) minus the H+ ion concentration (x). Therefore, [NO₂⁻] = [HNO₂] - [H⁺]

[NO₂⁻] = 0.10 M - x

The equilibrium expression for the dissociation of HNO₂ can be written as;

Ka = [H⁺][NO₂⁻] / [HNO₂]

Substituting the expressions we found for [NO₂⁻] and [HNO₂]:

4.5 x 10⁻⁴ = x(0.10 M - x) / 0.0020 M

Solving for x using the quadratic formula;

x = 1.4 x 10⁻⁴ M

Now we can calculate the concentration of H⁺ ions in the final solution:

[H⁺] = [HCl] + [HNO₂]

[H⁺] = 0.00050 M + 1.4 x 10⁻⁴ M

[H⁺] = 6.9 x 10⁻⁴ M

Finally, we calculate the pH of  solution by using the formula; pH = -log[H⁺]

pH = -log(6.9 x 10⁻⁴)

pH = 3.16

To know more about resultant solution here

https://brainly.com/question/27890353

#SPJ4

Answer:

the freezing point of the 5.6 molal solution of ethylene glycol in ethanol is -125.744 °C

Explanation:

To calculate the freezing point depression of a solution, we can use the formula:

ΔTf = Kf * molality

where:

ΔTf is the freezing point depression

Kf is the freezing point depression constant for the solvent (in this case, ethanol)

molality is the number of moles of solute per kilogram of solvent.

The freezing point depression constant for ethanol is 1.99 °C/m.

We are given that the solution is 5.6 molal, which means there are 5.6 moles of ethylene glycol per kilogram of ethanol.

So, we can calculate the freezing point depression as:

ΔTf = 1.99 °C/m * 5.6 mol/kg = 11.144 °C

The freezing point depression is 11.144 °C.

To find the freezing point of the solution, we can subtract this value from the freezing point of pure ethanol, which is -114.6 °C.

Freezing point of solution = -114.6 °C - 11.144 °C = -125.744 °C

Therefore, the freezing point of the 5.6 molal solution of ethylene glycol in ethanol is -125.744 °C.

These rules described by specific cases of an ideal gas law, which states PV = nRT. When temperature rises, molecules become more energised, and lose their attraction to one another, causing pressure to fall.

As long as the volume remains constant, the pressure of a given quantity of petrol is precisely proportional towards its absolute temperature (Amontons' law). Under constant pressure, the volume of the a given gas is proportional to its exact temperature.

Now, let's review PV = nRT, our ideal petrol law. In this equation, P denotes pressure in atmospheres, V denotes volume in litres, n denotes moles of particles, T denotes temperature in Kelvin, and R denotes the ideal gas constant.

To know more about attraction visit:

https://brainly.com/question/10895182

#SPJ1

Pyrotechnic displays involve controlled explosions to produce dazzling display of light and sound.

Pyrotechnic displays involve controlled explosions to produce a dazzling display of light and sound. It is important to ensure that the explosions are safe and do not cause any harm to people or property. Some ways to control an explosion for pyrotechnic display:

Proper planning and design: The pyrotechnic display should be carefully planned and designed to ensure that the explosions are safe and controlled.

Use of safety equipment: Pyrotechnicians should wear appropriate safety equipment, including helmets, fire-resistant clothing, and ear protection, to protect themselves from the effects of explosions.

Monitoring and supervision: A team of trained professionals should be responsible for the set-up, operation, and monitoring of the pyrotechnic display.

Adherence to local regulations: The pyrotechnic display should comply with all local regulations and guidelines regarding the use of explosives and public safety.

To know more about controlled explosion, refer

https://brainly.com/question/18187607

#SPJ1

The concentration of the hydroxide ion in the saturated Ca(OH)₂ solution is 0.080 M.

To calculate the concentration of hydroxide ion in the saturated Ca(OH)₂ solution, we need to use the results of the titration.

Assuming that the titrant is a strong acid, the balanced chemical equation for the reaction is; H⁺ + OH⁻ → H₂O

The equivalence point of the titration is reached when all of the hydroxide ions in the saturated Ca(OH)₂ solution have reacted with the acid. At this point, the moles of H⁺ added equals the moles of OH⁻ in the original solution. Therefore, we can use the volume and concentration of the titrant, along with the volume of the saturated Ca(OH)₂ solution, to calculate the concentration of OH⁻.

Let's assume that the titrant used is 0.1 M HCl, and that it took 20.0 ml of HCl to reach the equivalence point. This means that 20.0 ml of HCl contains 0.002 moles of H⁺ ions. Since the reaction is 1:1, there are also 0.002 moles of OH⁻ ions in the original 25.0 ml of saturated Ca(OH)₂ solution.

To calculate the concentration of OH⁻ in the saturated Ca(OH)₂ solution, we can use the following equation.

OH⁻ concentration = moles of OH⁻ /volume of solution

OH⁻ concentration = 0.002 moles / 0.025 L

OH⁻ concentration = 0.080 M

To know more about concentration here

https://brainly.com/question/10725862

#SPJ4

It would require 6.31 kJ of energy to change 2.8 g of liquid water to steam if the water is already at 100°C.

To solve this problem, we need to use the following equation:

q = n * ΔHvap

where q is the amount of energy required to vaporize the liquid, n is the number of moles of water, and ΔHvap is the molar heat of vaporization.

First, we need to calculate the number of moles of water in 2.8 g. We can use the molar mass of water, which is approximately 18 g/mol:

moles of water = mass / molar mass

moles of water = 2.8 g / 18 g/mol

moles of water = 0.1556 mol

Next, we can use the equation above to calculate the amount of energy required to vaporize this amount of water:

q = n * ΔHvap

q = 0.1556 mol * 40.6 kJ/mol

q = 6.31 kJ

Learn more about energy here:

https://brainly.com/question/11399976

#SPJ1

It would require 6.31 kJ of energy to change 2.8 g of liquid water to steam if the water is already at 100°C.

To solve this problem, we need to use the following equation:

q = n * ΔHvap

where q is the amount of energy required to vaporize the liquid, n is the number of moles of water, and ΔHvap is the molar heat of vaporization.

First, we need to calculate the number of moles of water in 2.8 g. We can use the molar mass of water, which is approximately 18 g/mol:

moles of water = mass / molar mass

moles of water = 2.8 g / 18 g/mol

moles of water = 0.1556 mol

Next, we can use the equation above to calculate the amount of energy required to vaporize this amount of water:

q = n * ΔHvap

q = 0.1556 mol * 40.6 kJ/mol

q = 6.31 kJ

Learn more about energy here:

https://brainly.com/question/11399976

#SPJ1

There is 21.77 g of excess SO₂ left over after the reaction is complete.

Reagents are substances used in laboratory tests and can be used in a chemical process to find, quantify, or create other substances.

2SO₂ + O₂ → 2SO₃

Molar mass of SO₂ = 32.06 g/mol

Molar mass of O₂ = 31.9988 g/mol

Number of moles of SO₂ = 21.71 g / 32.06 g/mol = 0.677 mol

Number of moles of O₂ = 21.71 g / 31.9988 g/mol = 0.678 mol

2 moles of SO₂ : 1 mole of O₂

0.678 mol O₂ × (2 mol SO₂ / 1 mol O₂) = 1.356 mol SO₂

Therefore, 1.356 mol of SO₂ are required to react completely with 0.678 mol of  O₂. However, we only have 0.677 mol of SO₂, so there is an excess of:

Excess SO₂ = 1.356 mol – 0.677 mol = 0.679 mol

Molar mass of SO₂ = 32.06 g/mol

Excess SO₂ = 0.679 mol × 32.06 g/mol = 21.77 g

Therefore, there is 21.77 g of excess SO₂ left over after the reaction is complete.

To know more about reagent, refer

https://brainly.com/question/6959208

#SPJ1

The pH of the solution prepared by adding 20.0 mL of 0.100 M HCl to 80.0 mL of a buffer that is comprised of 0.25 M NH₃ and 0.25 M NH₄Cl is 3.79.

The balanced chemical equation for the reaction between NH₃ and HCl is:

NH₃ (aq) + HCl (aq) → NH₄⁺ (aq) + Cl⁻ (aq)

Before any HCl is added, the solution contains 80.0 mL of a buffer solution that is comprised of 0.25 M NH₃ and 0.25 M NH₄Cl. NH₃ is a weak base, and its dissociation in water can be represented as follows:

NH₃ (aq) + H₂O (l) ⇌ NH₄⁺ (aq) + OH⁻ (aq)

The base dissociation constant (Kb) for NH₃ is 1.8 x 10⁻⁵ at 25°C.

After adding 20.0 mL of 0.100 M HCl to the buffer solution, the amount of NH₃ remaining in the solution will react with the HCl to form NH₄⁺ and Cl⁻. The amount of HCl added to the solution is:

moles of HCl = M x V = 0.100 mol/L x 0.020 L

                                   = 0.002 mol

Since NH₃ is a weak base, the buffer will resist changes in pH upon addition of HCl. The added HCl will react with NH₃ in the buffer solution to form NH₄⁺ and Cl⁻ ions. The NH₄⁺ ion is the conjugate acid of NH₃ and will slightly increase the acidity of the solution.

The amount of NH₃ that reacts with the HCl is:

Moles of NH₃ = moles of HCl

                        = 0.002 mol

The remaining amount of NH₃ in the solution is:

Initial moles of NH₃ - moles of NH₃ that reacted = (0.25 mol/L x 0.080 L) - 0.002 mol = 0.018 mol

The amount of NH₄⁺ that forms is equal to the amount of NH₃ that reacted:

0.002 mol of NH₃ = 0.002 mol of NH₄⁺

The concentration of NH₃ in the final solution is:

[ NH₃ ] = moles of NH₃ / total volume of solution

           = 0.018 mol / 0.100 L = 0.18 M

The concentration of NH₄⁺ in the final solution is:

[ NH₄⁺ ] = moles of NH₄⁺ / total volume of solution

            = 0.002 mol / 0.100 L = 0.02 M

The concentration of H⁺  in the final solution can be calculated using the equilibrium constant expression for NH₃:

Kb = [ NH₃ ][ OH⁻ ] / [ NH₃ ]

[ H⁺ ] = Kb x [ NH₃ ] / [ NH₃ ] = (1.8 x 10⁻⁵) x (0.18 mol) / (0.02 mol) = 0.000162 M

The pH of the final solution can be calculated as:

pH = -㏒[H⁺] = -log(0.000162) = 3.79

Therefore, the pH of the solution obtained by adding 20.0 mL of 0.100 M HCl to 80.0 mL of a buffer containing 0.25 M NH₃ and 0.25 M NH₄Cl is 3.79.

To know more about the Solution, here

https://brainly.com/question/29328086

#SPJ4

False. During proper cool-down activities, the body's aerobic energy system can help remove lactic acid from the muscles, but it does not convert it into fuel.

Lactic acid is converted into lactate, which is then transported to the liver where it is converted back into glucose through a process called gluconeogenesis. This glucose can then be used as fuel by the body. During intense exercise, the body relies heavily on the aerobic energy system to produce energy quickly. This results in the production of lactic acid, which can lead to muscle fatigue and soreness.

During the cool-down period, the body's aerobic energy system takes over to restore energy stores and remove waste products, including lactic acid. However, instead of converting lactic acid to fuel, it is actually converted into pyruvate, which then enters the mitochondria of the cell and undergoes aerobic respiration to produce ATP (adenosine triphosphate) – the primary source of energy for the body. The aerobic energy system helps remove lactic acid by converting it into pyruvate, which is then used as fuel for the production of ATP through aerobic respiration.

Learn more about Lactic acid, here;

https://brainly.com/question/3070116

#SPJ4

The pressure exerted by the female's stiletto heel on the hard maple floor is approximately 76.1 psi.

The force that the woman is applying to the door = 300 N/m²  * 0.0200 m²

Force is 6 N

First, we need to convert the weight of the female from pounds to pounds-force.

Since weight is a force that is due to gravity, we can use the equation:

force = mass x acceleration due to gravity

The acceleration due to gravity is approximately 32.2 feet per second squared, so we can calculate the force as:

force = mass x acceleration due to gravity

force = 120 lbs x (1 lb-force/32.2 ft/s^2)

force = 3.73 lb-force

Next, we need to calculate the area of the heel in contact with the floor. We can use the formula for the area of a circle:

area = π x (diameter/2)^2

Plugging in the values given, we get:

area = π x (0.25 in/2)^2 = 0.049 in^2

Now we can calculate the pressure as the force divided by the area:

pressure = force/area = 3.73 lb-force / 0.049 in^2

pressure  = 76.1 psi

2. Force = Pressure * area

The force that the woman is applying to the door = 300 N/m²  * 0.0200 m²

Force = 6 N

Learn more about pressure at: https://brainly.com/question/24719118

#SPJ1

2) Weakened microorganisms that promote the production of antibodies may be included in vaccines.

Microorganisms that cause disease are called pathogens. Bacteria, viruses, fungus, and parasites are examples of pathogens. By contact with an infected person or animal, as well as through contact with contaminated food, drink, or soil, they can enter the body.In order to create antibodies against particular infections, the immune system of the body is stimulated by vaccines.A vaccine typically contains a weakened or killed form of the pathogen that is responsible for the disease it is designed to protect against. When the body is exposed to this weakened or killed form of the pathogen, the immune system responds by producing antibodies which help to protect against the disease.

learn more about Pathogens Refer:brainly.com/question/28148146

#SPJ1

The NaCl solution has a 30 g/L concentration.

Sodium chloride, or NaCl, is a chemical compound that is frequently referred to as table salt. It is an ionic compound comprised of chloride anions and sodium cations (Na+) (Cl-). At room temperature, NaCl is a white, crystalline solid that is very soluble in water.

Let's start by converting the solution's volume from milliliters to liters:

100 ml = 100/1000 L = 0.1 L

Then, we can use the following formula to determine the solution's concentration:

concentration = amount of solute / volume of solution

replacing the specified values:

concentration = 3 g / 0.1 L = 30 g/L

As a result, the NaCl solution has a 30 g/L concentration.

To know more about NaCl, visit:

brainly.com/question/1550455

#SPJ1

Approximately 283.8 pounds of nitrogen oxides would be produced annually from the use of the natural gas furnace.

First, we need to convert the rate of heat needed for the home from British thermal units per hour (Btu/hr) to Btu per year:

32600 Btu/hr × 24 hr/day × 176 days/year = 137088000 Btu/year

Next, we need to determine the amount of natural gas that needs to be combusted to produce this amount of heat. We know that only 92.6% of the heat generated from combustion is used in heating the home, so we can use the following equation to calculate the amount of natural gas needed:

Heat from combustion = Heat used in heating / Efficiency

where Efficiency is expressed as a decimal.

Heat from combustion = 137088000 Btu/year / 0.926 = 148120216.2 Btu/year

Now, we can use the nitrogen oxide emission rate to determine the amount of nitrogen oxides produced per year:

Nitrogen oxides produced = (Nitrogen oxide emission rate) × (Natural gas combusted)

To convert from mg/lbm to lbm/Btu, we need to multiply the nitrogen oxide emission rate by 0.00000220462 lbm/mg.

Nitrogen oxides produced = (880 mg/lbm × 0.00000220462 lbm/mg) × (148120216.2 Btu/year / 1 lbm) = 283.8 lbm/year

For more such questions on natural gas

https://brainly.com/question/14285986

#SPJ11

The molecular equation for the reaction between BaBr2(aq) and H2SO4(aq) can be written as:

BaBr2(aq) + H2SO4(aq) → BaSO4(s) + 2HBr(aq)

What is Molecular Mass?

Molecular mass (also known as molecular weight) is the sum of the atomic masses of all the atoms in a molecule. It is usually expressed in atomic mass units (amu) or in grams per mole (g/mol). The molecular mass is used in stoichiometry calculations, which involve determining the amount of reactants and products in a chemical reaction.

In this equation, the barium cation (Ba2+) from barium bromide (BaBr2) combines with the sulfate anion (SO42-) from sulfuric acid (H2SO4) to form barium sulfate (BaSO4) as a precipitate. At the same time, the hydrogen cations (H+) from sulfuric acid combine with the bromide anions (Br-) from barium bromide to form hydrogen bromide (HBr) in aqueous solution.

Learn more about Molecular Mass from given link

https://brainly.com/question/24191825

#SPJ1

Answer: Either B or C

Explanation:

The chemical reaction shown is the synthesis of water. At dynamic equilibrium, the rate of the forward reaction (2H₂ + O2 → 2H₂0) is equal to the rate of the reverse reaction (2H₂0 → 2H₂ + O2). This means that the concentration of reactants (2H₂ and O2) and products (2H₂0) will remain constant over time. In other words, the amount of water being formed is equal to the amount of water being broken down back into its reactants.

Hailstones form as a result of condensation, freezing, and the influence of wind and pressure at a low concentration of water vapour, high in the sky.

Hailstones form through a process involving condensation, freezing, and the assistance of wind and pressure. Here's a step-by-step explanation:
1. Condensation of water vapour: Hailstones begin to form when water vapour in the atmosphere condenses into droplets due to cooling temperatures.
2. Freezing: As these water droplets are lifted higher into the sky by strong updrafts, they encounter freezing temperatures and turn into ice particles.
3. Growth: The ice particles continue to grow as more water droplets come into contact with them, which freeze upon impact. This process is aided by the wind, which helps to circulate the hailstones within the storm cloud, allowing them to collect more moisture.
4. Precipitation: When hailstones become too heavy for the updrafts to support them, they fall to the ground as precipitation.

For more such questions on Hailstones

brainly.com/question/25597400

#SPJ11

The most probable mechanism is SN1 (substitution nucleophilic unimolecular) mechanism.

If the rate of substitution for a specific substitution reaction is independent of both the nature and concentration of the nucleophile, it is not possible for both SN1 and SN2 mechanisms to account for the observations. Substitution reaction is a chemical reaction that entails the exchange of one substituent (or atom) for another in a molecule.

The substituents are exchanged with no change in the molecular framework. The nucleophile attacks the substrate (electrophile) in a substitution reaction.

Mechanism:The substitution nucleophilic unimolecular (SN1) mechanism is the most plausible mechanism. The SN1 reaction is a two-step process in which the initial step is rate-determining, while the second step is rapid. In this process, the leaving group (substituent) is first dissociated, generating a carbocation intermediate.

The nucleophile (new substituent) then attaches to the carbocation.Intermediate formation in the rate-determining step distinguishes the SN1 reaction from the SN2 reaction. The SN2 reaction is a one-step process, in which the substrate is attacked by the nucleophile while the leaving group departs.

Thus, if the rate of substitution for a specific substitution reaction is independent of the concentration and nature of the nucleophile, the SN1 mechanism is the most plausible.

For more such questions on SN reactions

https://brainly.com/question/11865442

#SPJ11

To find the pH of the resulting solution, we need to calculate the concentration of hydronium ions (H3O+) in the solution. After all the calculations the pH of the resulting solution is 3.14.

The balanced chemical equation for the reaction between hydrazine and hydrochloric acid is:

\NH2NH2(aq) + HCl(aq) → NH3(aq) + NH4Cl(aq)

First, we need to calculate the initial concentrations of hydrazine and hydrochloric acid. We are given that each solution has a concentration of 0.500 M, which means that there are:

0.500 mol/L x 0.100 L = 0.0500 moles of hydrazine in 100.0 mL of solution

0.500 mol/L x 0.100 L = 0.0500 moles of hydrochloric acid in 100.0 mL of solution

Since the reaction between hydrazine and hydrochloric acid is a one-to-one reaction, we can assume that all of the hydrazine will react with an equal amount of hydrochloric acid, producing 0.0500 moles of NH4Cl and NH3. Therefore, the final concentration of NH4Cl and NH3 will be:

0.0500 moles / 0.200 L = 0.250 M

We can use the Kb value for hydrazine to find the concentration of NH3:

Kb = [NH3][OH-]/[NH2NH2]

[tex]5.9 x 10^{-10} = [NH3]^2/[NH2NH2][/tex]

[NH3] = sqrt(Kb x [NH2NH2])

[tex][NH3] = sqrt(5.9 * 10^{-10}* 0.0500 M)[/tex]

[NH3] = 1.37 x 10^-3 M

Now that we know the concentration of NH3, we can calculate the concentration of H3O+ using the equation for the ionization of water:

Kw = [H3O+][OH-]

1.0 x 10^-14 = [H3O+][1.37 x 10^-11]

[H3O+] = 7.3 x 10^-4 M

Therefore, the pH of the resulting solution is:

pH = -log[H3O+]

[tex]pH = -log(7.3 * 10^{-4}[/tex]

pH = 3.14

So the pH of the resulting solution is 3.14.

Learn more about Hydrochloric acid here:

brainly.com/question/15231576

#SPJ4

You would need 2.922 grams of solid NaCl to prepare 100 mL of a 0.50 M NaCl aqueous solution.

To calculate the mass of solid NaCl needed to prepare a 0.50 M solution with a volume of 100 mL, we need to use the following formula;

moles of solute = Molarity × volume (in liters)

We can rearrange this formula to solve for the mass of solute (NaCl) needed;

mass of NaCl=moles of NaCl × molar mass of NaCl

First, let's calculate the moles of NaCl needed;

moles of NaCl = Molarity × volume (in liters) = 0.50 mol/L × 0.1 L = 0.05 moles

Next, let's calculate the mass of NaCl needed;

mass of NaCl = moles of NaCl × molar mass of NaCl = 0.05 moles × 58.44 g/mol

= 2.922 g

To know more about aqueous solution here

https://brainly.com/question/26856926

#SPJ4

The type of bond that links amino acids in the first level of protein structure is called a peptide bond.

Protein structure refers to the three-dimensional arrangement of atoms in a protein molecule. The primary structure, secondary structure, tertiary structure, and quaternary structure are the four main levels of protein structure.

The first level of protein structure is the primary structure. This is the order of amino acids joined together to form a peptide chain. The amino acid sequence determines the protein's shape and function.

Peptide bonds link amino acids together, forming a polypeptide chain.

A protein molecule's structure and function are determined by the sequence of amino acids in its polypeptide chain.

Peptide bonds link amino acids together to form protein molecules. The bond occurs between the amino group of one amino acid and the carboxyl group of another amino acid.

The carboxyl group loses its hydroxyl group (-OH) in the process, while the amino group loses a hydrogen atom. This reaction results in the release of water, hence the term "condensation reaction."

Peptide bonds are covalent bonds. A peptide bond is created by the removal of water from the carboxyl group of one amino acid and the amino group of another. This results in a new molecule called a dipeptide.

To know more about peptide bond refer to-

brainly.com/question/28295128#

#SPJ11

One mole of a monoprotic acid would be needed to react completely with 25 ml of a 1.10 M NaOH solution.

An acid is a compound that releases a proton (H+) when dissolved in water, whereas a base is a compound that accepts a proton when dissolved in water. When an acid and a base combine, a neutralization reaction occurs. The products of this reaction are water and a salt (ionic compound).

Neutralization is a chemical reaction that occurs between an acid and a base, resulting in a salt and water. This reaction entails the transfer of electrons from the base to the acid, forming water molecules and an ionic compound known as a salt. This reaction can be categorized into five types, depending on the combination of acid and base used.

The general formula for the neutralization reaction is:

HA + BOH → BA + H2O , where HA represents an acid, BOH represents a base, BA represents a salt, and H2O represents water. To react completely with 25 mL of a 1.10 M NaOH solution, you would need 0.0275 moles of a monoprotic acid.

Know more about   neutralization   here:

https://brainly.com/question/23008798

#SPJ11

Inferring from this, the sample contains roughly 1.186 moles of xenon gas.

Number of moles = Molar volume at STP litres/V o l u m e ITP litres is the formula to calculate the number of moles at STP.

We need to utilise the molar mass of xenon, which is roughly 131.3 g/mol, to calculate the amount of xenon gas in the sample. The number of moles is then determined by dividing the gas's mass, which is given, by its molar mass:

Number of moles = Mass of gas / Molar mass of gas

Number of moles = 155.7 g / 131.3 g/mol

Number of moles = 1.186 moles (rounded to three decimal places)

To know more about xenon gas visit:-

https://brainly.com/question/11850390

#SPJ1

The entropy change of the universe is 0.0376 Joules per Kelvin (J/K).

To calculate the entropy change of the universe, we need to determine the entropy change for both the hot block of iron and the cool block of iron. Entropy change is given by the formula:

ΔS = Q/T

where ΔS is the entropy change, Q is the heat transferred, and T is the temperature in Kelvin.

First, convert the given temperatures from Celsius to Kelvin:
455.7°C = 728.85 K (by adding 273.15)
303.8°C = 576.95 K (by adding 273.15)

Next, let's calculate the entropy change for each block.

For the hot block, heat is flowing out of it, so Q is -104 J. Therefore, the entropy change is:
ΔS_hot = Q/T = -104 J / 728.85 K = -0.1427 J/K

For the cool block, heat is flowing into it, so Q is 104 J.

Therefore, the entropy change is:
ΔS_cool = Q/T = 104 J / 576.95 K = 0.1803 J/K

Now, to find the entropy change of the universe, we need to add the entropy changes of both blocks:
ΔS_universe = ΔS_hot + ΔS_cool = -0.1427 J/K + 0.1803 J/K = 0.0376 J/K

to know more about entropy change refer here:

https://brainly.com/question/4526346#

#SPJ11

Answer:

78,300 cals.

Explanation:

540 cals of heat reqd to convert1 gm of water at 100 deg C so 540 x 145 = 78,300 cals.

Answer:

The answer is 78,300 calories.

540 calories of heat are required to transform one gram of water at 100 degrees Celsius, so 540 x 145 = 78,300 cal

Explanation:

Brainliest pls:)

The pH before any HCl is added will be; 12.91, and the pH after the addition of 4.00 mL HCl is 1.17.

To solve this problem, we need to use the balanced chemical equation for the reaction between M(OH)₂ and HCl;

M(OH)₂ + 2HCl → 2H₂O + MCl₂

The balanced chemical equation shows that the reaction between M(OH)₂ and HCl is a 1:2 reaction. Therefore, the number of moles of HCl needed to react with the M(OH)₂ is twice the number of moles of M(OH)₂.

Before any HCl is added, the solution contains only M(OH)₂. The concentration of M(OH)₂ is 0.0811 M. We will use the following equation to calculate the pOH:

pOH = -log[OH⁻]

Since M(OH)₂ is a strong base, it completely dissociates in water, so [OH⁻] = [M(OH)₂]. Therefore;

[OH⁻] = 0.0811 M

pOH = -log(0.0811) = 1.09

The pH can be calculated using the following equation;

pH + pOH = 14

pH = 14 - pOH = 14 - 1.09 = 12.91

After the addition of 4.00 mL of HCl, the total volume of the solution is 5.00 mL + 4.00 mL = 9.00 mL. The number of moles of M(OH)₂ in the solution is;

moles M(OH)₂ = concentration x volume = 0.0811 M x 5.00 mL = 0.0004055 moles

The number of moles of HCl added to the solution is

moles HCl = concentration x volume = 0.0512 M x 4.00 mL = 0.0002048 moles

Since the reaction is a 1:2 reaction, the number of moles of HCl required to react with all of the M(OH)₂ is:

moles HCl required = 2 x moles M(OH)₂ = 2 x 0.0004055 = 0.000811 moles

The remaining moles of HCl in the solution after the reaction is;

moles HCl remaining = moles HCl added - moles HCl required = 0.0002048 - 0.000811 = -0.0006062 moles

Since the remaining moles of HCl is negative, it means that all of the M(OH)₂ has reacted and there is an excess of HCl in the solution. Therefore, the pH of the solution is determined by the concentration of the excess H⁺ ions. The concentration of excess H⁺ ions can be calculated using the following equation;

[H⁺] = concentration of HCl remaining / total volume of solution

[H⁺] = (-0.0006062 moles / 9.00 mL) x (1000 mL / 1 L) = -0.0674 M

The pH can be calculated using the following equation:

pH = -log[H⁺] = -log(-0.0674)

= 1.17 (Note: The negative sign indicates that the solution is acidic.)

To know more about pH here

https://brainly.com/question/2288405

#SPJ4

--The given question is incorrect, the correct question is

"Using the concentration values determined in this investigation for M(OH)₂  and HCl, calculate the pH for a strong acid + strong base titration in which 5.00 mL of the M(OH)₂ was transferred via pipet to a beaker and HCl was added from the burret. Calculate the pH: a) before any HCl is added, b) after the addition of 4.00 mL HCl. Concentration of HCl = 0.0512 M, Concentration of M(OH)₂  = 0.0811 M."--