5) Two knights are jousting on horseback. It takes 2.2 seconds for the knights to meet in the middle
of the course and collide. If one knights horse ran at 6m/s and the other's horse at 9m/s, then
how far apart must they have been begin with?

Answers

Answer 1

Answer:

33m

Explanation:

Step 1: Whats going on?

We know that since they meet in the middle, and dont stop, that both knights take the same time to travel to the middle. This means that if they are traveling at a constant speed we can easily calculate the distance each travels

Step 2: Model it with Equations

General equation: V = D/t  [m/s]

T = D1 + D2 = V1*t + V2*t = t * (v1 + v2)

Step 3: Sub in knowns

T = 2.2 s* (6m/s + 9m/s)

T = 33m


Related Questions

The quantity of matter inside the body is?

Answers

Answer:

MASS

Explanation:

mass is the quantity of matter contained in the body.

under what condition do the values of gravitational force and gravitational constant become same or equal​

Answers

Answer:

The values of gravitational force and gravitational constant become same or equal when product of masses involved equals the square of distance between them.

The elevators in the John Hancock building in Chicago move 783 ft in 33 s. What is this speed in miles per hour?

Answers

Answer:

16.18 mph

Explanation:

the speed of elevators =

(783×3600)/(33×5280) =

2,818,800/174,240 = 16.18 mph

what is mean mechanical advanteg​

Answers

Answer:

The ratio of the force produced by a machine to the force applied to it, used in assessing the performance of a machine is called mechanical advantage.

A bullet fired from a pistol travelled 50 metres to the target in 0.08s. What was its speed?

Answers

Its speed is 4m/s

Jdbsjsjsjsnjdjdjdd

one meter equals how many miles, yards, feet, inches?

Answers

Answer:

0.000621 mile

1.094 yards

3 feet 3.37 inches

39.37 inches

Answer:

1m = 0.000621371 miles = 1.09361 yards = 3.28084 feet = 39.3701 inches

ASAP If the initial pressure of a gas is 100 kPa, initial volume is 1.0 L, and final pressure is 25 kPa, what is the final volume?

When no one answers your question...

Answers

The final volume is 4.0 liters.

We can calculate the final volume with Boyle's law:

[tex] P_{i}V_{i} = P_{f}V_{f} [/tex]  (1)

Where:

[tex] P_{i}[/tex]: is the initial pressure = 100 kPa

[tex] V_{i}[/tex]: is the initial volume = 1.0 L

[tex]P_{f}[/tex]: is the final pressure = 25 kPa

[tex]V_{f}[/tex]: is the final volume =?

Hence, the final volume is:

[tex] V_{f} = \frac{P_{i}V_{i}}{P_{f}} = \frac{100 kPa*1.0 L}{25 kPa} = 4.0 L [/tex]

Therefore, the final volume is 4.0 liters.

You can learn more about  Boyle's law here: https://brainly.com/question/21184611?referrer=searchResults

I hope it helps you!

9. Liquid A has a density of 1.27 g/mL and liquid B has a density of 0.78 g/mL. Both are poured into the same container. If the liquids do not react chemically, what will happen to the liquids ________________?

Answers

Liquid a does damage to 0..384

Liquid A has a density of 1.27 g/mL and liquid B has a density of 0.78 g/mL. Both are poured into the same container. If the liquids do not react chemically then the liquid B which has a density of 0.78 g/m would come over the liquid because it is a lighter fluid having less density than the liquid A

What is density?

It can be defined as the mass of any object or body per unit volume of the particular object or body. Generally, it is expressed as in gram per cm³ or kilogram per meter³.

formula for density

ρ = mass / volume

Liquids A and B have densities of 1.27 and 0.78 grams per milliliter, respectively. The same container receives both of them. If there is no chemical reaction between the liquids, then liquid B, which has a density of 0.78 g/m, would emerge on the top because it is a lighter fluid and has less density than liquid A.

Thus, If there is no chemical reaction between the liquids, then liquid B, which has a density of 0.78 g/ml, would emerge on the top because it is a lighter fluid and has less density than liquid A.

Learn more about density from here

brainly.com/question/15164682

#SPJ2

_________at any particular point in a liquid is _________ in all directions​

Answers

Answer:

Pressure at any particular point in a liquid is transmitted in all directions

Explanation:

I hope you like my answer and my answer helped you .

what would happen if measurements such as mass,length,volume,or temperature weren't standardized and everyone made up their own units

Answers

Answer:

The world would have been blown up by now.

Explanation:

Hypothetically, lets say that someone gave Kim Jong boi a cup of coffee.

He gets mad at the "public servant" since it didn't contain 3 posafa43asdunds of sugar which makes him "big".

The public servant claims they added jfoaj4su38093 units of sugar, which is equivalent to 3 posafa43asdunds.

He gets mad and launches big cannons at Trump since he blames Boe Jiden.

Help with these please​

Answers

Answer:

I'll just give short and simple explanation .

Explanation:

when the distance between the masses are doubled but the masses remain the same then,

the gravitational force between two masses decrease by four times when the distance between them is doubled.

hope this helped you

any confusion then comment it.

2 ways that angular and linear momentum are alike and different

Answers

Answer:

Angular momentum is inertia of rotationmotion. Linear momentum is inertia oftranslation motion. The big difference is that the type of motion which is related to each momentum is different.

write the maximum number of electrons that can be accommodated in the s,p,d,f subshells​

Answers

Answer:

S=2,P=6,D=10,F=14. The total number of electrons contained by s,p,d,f subshells is 32

plz and I don't know this plz help me​

Answers

Answer:

Newton

it is derived of mass and displacement

estimate my age in seconds 14 years old

Answers

Oooooooooooooooooooooooooooooooooooooof

Which statement describes the motion of a ball as it drops onto a vertical spring?
a. The acceleration of the ball decreases as the spring shrinks.
b. The accIleration of the ball decreases as the spring extends.
c. The velocity of the ball changes from positive to negative as the spring shrinks.
d. The velocity of the ball changes from negative to positive as the spring extends.

Answers

Answer:

F = M a    Newton's second law

F = - K x     force exerted by compressed spring

a = - K x / M

a) is true because the ball originally is accelerated due to gravity and this acceleration will decrease as the spring in compressed

One could argue for (d) if the downward direction was designated as negative

Prior to maximum compression of the spring the velocity would negative and as the spring began to extend (and the ball began move upward) the velocity of the ball would change from negative to positive

What is 2.34x10^3x5.1x10^-2 in significant figures.

Answers

Answer:

5 significant figures

Explanation:

As the question does not state any term in 'significant figures', I will provide the number and the number of significant figures.

First of all, the number. 2.34 × 10³ = 2340, and 5.1 × 10^-2 = 0.051, therefore. 2340 × 0.051 = 119.34.

This will be equal to 5 significant figures.

A box is 300 kg & it covers the area of 150 m2 find the pressure exerted by the box in the ground.​

Answers

Answer:

If we assume that the box is a cube with 150 m² surface area

Area of 1 face = 150 m² / 6 = 25 m²

The box will exert a downward force of

Force = mass * acceleration due to gravity

Force = 300 kg * 9.81 m/s² N

Force = 2943 N

The box exerts a pressure ( force / unit area) = 2943 N / 25 m²

Pressure = 117.7 N/m²

Thank you, if you found this helpful please comment.

A crane can lift 5000 kg mass to the height 10m in 10 sec. What is its power?​

Answers

Answer:

49.050 KW

Explanation:

work done = PE

= mgh

=5000×9.81×10

=490500J

power = workdone/Time taken

= 490500/10

= 49050 watts

= 49.050kW

power is rate of doing work
work done = force x distance

force is ma
5000 x 10
50000
or 5000x 9.81
49,050

rate means divide by time
49,050/50000 divide by 10

4905/5000W

Waves are created on the surface of water when we drop a stone into it. Similarly you must have seen the waves generated on a string when both its ends are held in hand and it is shaken. Light is also a type of wave called the electromagnetic wave. Gamma rays, X-rays, ultraviolet rays, infrared rays, microwave and radio waves are all different types of electromagnetic waves. Astronomical objects emit these waves and we receive them using our instruments. All our knowledge about the universe has been obtained through these waves. Gravitational waves are a very different type of waves. They have been called the waves on the fabric of space-time. Einsteine predicted their existence in 1916. These waves are very weak and it is very difficult to detect them. Scientists have constructed extremely sensitive instruments to detect the gravitational waves emitted by astronomical sources. Among these, LIGO (Laser Interferometric Gravitational Wave Observatory) is the prominent one. Exactly after hundred years of their prediction, scientists detected these waves coming from an astronomical source. Indian scientists have contributed significantly in this discovery. This discovery has opened a new path to obtain information about the Universe. i. Which type of wave a light ray is ? (1 marks) ii. What type of rays are Gravitational waves called ? (1 marks) iii. Why are the gravitational waves difficult to detect ? (1 marks) iv. Give any four examples of electromagnetic waves.​

Answers

Answer:

gdfhf

Explanation:

jjjjcjbwwfbooob#kkkkkkkki!vdvdiiiiiibl#dnqljuwhgeyehrhrygrgdyhehegegeggegegegeegegegevegwgegegegsjkegsygegdydheheyrteeeudgeedyeyrf

A student has a block that has a volume of 150 cm3 and a density of 30 g/cm3

Answers

Answer:

mass of block = 4500g

Explanation:

density = mass/volume

mass = volume x density

         = 150 x 30

         = 4500 g

help me i dont understand

Answers

Answer:

B

Explanation:

At the highest/maximum point the vertical velocity is zero because as the projectile is launched it eventually changes direction. At this instant it momentarily stop causing the maximum velocity to be zero.

hopefully this makes sense

:)

Motion is generally defined as an increase in distance

Answers

Answer:

motion is the act of changing location or position

Answer:

Motion is generally defined as an increase in distance with respect to time.

Without time it can't be said in motion

If a neutron’s relative mass is listed as 1, what would be the relative mass of a proton and an electron?

Answers

Answer:

The relative mass of the proton would be 1 and that of the electron

would be about 1/1840.

1.
On a fishing trip you catch a bass, a rock cod, and a salmon with masses of 1.07 kg, 6.0 kg, and
6.05 kg, respectively. What is the total mass of your catch with the proper number of significant
figures?

Answers

The total mass of your catch is 13.1 kg

Since you have three fishes a bass, a rock cod, and a salmon with masses of 1.07 kg, 6.0 kg, and  6.05 kg, respectively,

The total mass of your catch = mass of bass + mass of rock cod + mass of salmon

= 1.07 kg + 6.0 kg + 6.05 kg

= 13.12 kg

Since the total mass of your catch is 13.12 kg and we have three catches with two catches to two decimal places and one catch to one decimal place.

We cannot have more decimal places in our answer than the number of decimal places in the number with the least number of decimal places.

Since the least number of decimal places is in the mass of the rock cod which is 6.0 kg, the total mass of our catch is thus 13.1 kg to one decimal place.

So, the total mass of your catch is 13.1 kg

Learn more about significant figures here:

https://brainly.com/question/17343107

a.
1
S = ut +
1/2
at2
i. u as subject.

Answers

Answer:

[tex]s = ut + \frac{1}{2} at^{2} \\ ut = s - \frac{1}{2} a {t}^{2} \\ u = (s - \frac{1}{2} a {t}^{2} ) \div t \\ u = (s - \frac{1}{2} a {t}^{2} ) \times \frac{1}{t} \\ \\ u = \frac{s}{t} - \frac{1}{2t} a {t}^{2} \\ \\ u = \frac{s}{t} - \frac{1}{2} at \\ [/tex]

I hope I helped you^_^

How do you use a Beam Balance???

Answers

Your answer is in the attachment . Hope this helps.

Question 6.2
Calculate the reading on A2

Answers

Answer:

2.25A

Explanation:

that is the answer

3. An electric motor is used to lift a 6.0 kg of mass through a height of 1 metre. The energy it uses is measure on an energy meter is 10 joules.

a) Calculate the work done in lifting the mass​

Answers

Answer:

Climbing stairs and lifting objects is work in both the scientific and everyday sense—it is work done against the gravitational force. When there is work, there is a transformation of energy. The work done against the gravitational force goes into an important form of stored energy that we will explore in this section.

Figure 1. (a) The work done to lift the weight is stored in the mass-Earth system as gravitational potential energy. (b) As the weight moves downward, this gravitational potential energy is transferred to the cuckoo clock.

Let us calculate the work done in lifting an object of mass m through a height h, such as in Figure 1. If the object is lifted straight up at constant speed, then the force needed to lift it is equal to its weight mg. The work done on the mass is then W = Fd = mgh. We define this to be the gravitational potential energy (PEg) put into (or gained by) the object-Earth system. This energy is associated with the state of separation between two objects that attract each other by the gravitational force. For convenience, we refer to this as the PEg gained by the object, recognizing that this is energy stored in the gravitational field of Earth. Why do we use the word “system”? Potential energy is a property of a system rather than of a single object—due to its physical position. An object’s gravitational potential is due to its position relative to the surroundings within the Earth-object system. The force applied to the object is an external force, from outside the system. When it does positive work it increases the gravitational potential energy of the system. Because gravitational potential energy depends on relative position, we need a reference level at which to set the potential energy equal to 0. We usually choose this point to be Earth’s surface, but this point is arbitrary; what is important is the difference in gravitational potential energy, because this difference is what relates to the work done. The difference in gravitational potential energy of an object (in the Earth-object system) between two rungs of a ladder will be the same for the first two rungs as for the last two rungs.

Converting Between Potential Energy and Kinetic Energy

Gravitational potential energy may be converted to other forms of energy, such as kinetic energy. If we release the mass, gravitational force will do an amount of work equal to mgh on it, thereby increasing its kinetic energy by that same amount (by the work-energy theorem). We will find it more useful to consider just the conversion of PEg to KE without explicitly considering the intermediate step of work. (See Example 2.) This shortcut makes it is easier to solve problems using energy (if possible) rather than explicitly using forces.

More precisely, we define the change in gravitational potential energy ΔPEg to be ΔPEg = mgh, where, for simplicity, we denote the change in height by h rather than the usual Δh. Note that h is positive when the final height is greater than the initial height, and vice versa. For example, if a 0.500-kg mass hung from a cuckoo clock is raised 1.00 m, then its change in gravitational potential energy is

mgh=(0.500 kg)(9.80 m/s2)(1.00 m) =4.90 kg⋅m2/s2=4.90 Jmgh=(0.500 kg)(9.80 m/s2)(1.00 m) =4.90 kg⋅m2/s2=4.90 J

Note that the units of gravitational potential energy turn out to be joules, the same as for work and other forms of energy. As the clock runs, the mass is lowered. We can think of the mass as gradually giving up its 4.90 J of gravitational potential energy, without directly considering the force of gravity that does the

What is the kinetic energy of a 500kg car traveling 50m/s

Answers

Answer: 625000 J

Explanation:

KE= (1/2)mv^2

m=500kg

v=50m/s

KE= (1/2 )(500)(50)^2

= 625000 J

Other Questions
Which of the following phrases best describes the term scientific model?A. The application of scientific knowledge to make predictions aboutan object, system, or processB. An experiment in which variables are controlledC. A physical copy of a scientific object, system, or processD. A simplified representation used to explain or make predictionsabout somethingSUBMIT 18. '' ? 1. 2. 3. 4. A mass of 10kg is suspended from the end of a steel rod of length 2m and radius 1mm. What is the elongation of the rod beyond it's original length (Take E=200*10Nm) Answer and explanation? _________________is a group that decides what must be done to meet the functional objectives defined by leaders. 1.6.1 Suggest practical solutions on how any FIVE of the youth risk behaviours in if (2x,3y) =(8, 9),find x and y add 6 to the difference between 9 and 7 a) 7- (9 + 6)b) (7 - 9) + 6c) (9 - 7) + 6d) 9 - (7 + 6) This is finding the midpoint. Please help Find the solution for 2 - 3(x +4) = 8 Innovation in the lodging industry has made accommodations less inviting and more expensive less technological and less friendly more crowded and less sanitary more comfortable and more luxurious should people eat animals? Solve: 2 In 3 = In(x-4) Why is soccer healthy for you Simplify (ab)(ab)(ab)(ab).ab 4a 4b 44ab how does an increase in income lead to the development of industries Find the equation of the tangent of x^2- xy + y^2 =7 at (-1, 2) 9. Maria usually pays $3.10 per pound for her favorite granola. Which of the answers below isa better deal?A. 2 pounds for $6.49B. 3 pounds for $10C. 5 pounds for $14.75D. 8 pounds for $28Whats the answer I like eating bacon and eggs D OR I Find tan A of a RIGHT TRIANGLE with side lengths b = 8 and c = 12