Answer:
D (density) = Mass / Volume
V (ice) = Mass / Density = 50000 g / .92 kg / L
V = 50 kg / .92 kg / L
1 Liter of water weighs 1 kilogram = 50 L weighs 50000 g
V = 54.3 L the mass does not change upon the change of phase (freezing)
fuse wire is alloy of copper and alluminium? true or false
[tex]\huge\mathfrak\green{True}[/tex]
Calculating A cyclist's speed changes from
0 m/s to 15 m/s in 10 seconds. What is the
cyclist's average acceleration?
[tex]\\ \sf\longmapsto Acceleration=\dfrac{v-u}{t}[/tex]
[tex]\\ \sf\longmapsto Acceleration=\dfrac{15-0}{10}[/tex]
[tex]\\ \sf\longmapsto Acceleration=\dfrac{15}{10}[/tex]
[tex]\\ \sf\longmapsto Acceleration=1.5m/s^2[/tex]
Average acceleration is calculated using the following formula: Average Acceleration = Change in Velocity/ Time.
Acceleration is a fundamental concept in physics that measures the rate of change of an object's velocity with respect to time.
It quantifies how quickly an object's speed or direction of motion is changing.
Acceleration = Final velocity − Initial velocity/ Time
= 15 − 0/ 10
= 15/ 10
= 1.5 m/s²
Therefore, The cyclist's average acceleration is 1.5 m/s²
Learn more about Acceleration, refer to the link:
https://brainly.com/question/30660316
#SPJ3
18. A man weighing 1000 N runs up some stairs.
rising a vertical height of 5 m in 10 seconds.
a) What power does he develop?
Answer:
energy power
Explanation:
energy power
4 kg of water was
added to a 1.2 kg iron
boiler. How much
heat must be
supplied to the boiler
to heat the water in it
from 16 °C to 90 °C
Given :
Mass =5kg
T
1
=20
∘
C,T
2
=100
∘
C
ΔT=100−20=80
∘
C
Q=m×C×ΔT
where C= specific heat capacity of water
=4200J/(kgK)
Q=5×4200×80
=1680000 Joule.
=1680KJ
a system absorbs 35J of heat and in the process it does 11J of work if the initial internal energy is 205J a,what is the final internal energy b,the system follows a different thermodynamic path to the same final state and does 15J of work, what is the heat transferred ?
Answer:
[tex]a)uf = 205 + 35 - 11 \\ = 240 - 11 \\ = 229j \\ b)q(heat \: transferd) = 229 - 205 - 11 \\ = 24 - 11 \\ = 13j \\ thank \: you[/tex]
The heat transferred is
a) u f = 205+35-11
=240-11
= 229 j
b) q (heat transferred ) = 223-205-11
= 24-11
= 13 j
What is the difference between course and process in thermodynamics?
While a thermodynamic gadget passes thru an exchange in the state, a succession of states exceeded could be termed as a course of the device or direction of an alternate country. If the route of change of kingdom is completely distinctive, route of alternate of the nation may be termed as thermodynamic manner.
The technique is described via a direction, which is the non-stop collection of consecutive states via which the machine passes, consisting of the initial nation, the intermediate states, and the very last state. The process has a course along the course.
An asset whose price would not depend upon the course taken to attain that unique price is thought to as kingdom capabilities or point features. In contrast, those capabilities which do depend upon the direction from points are referred to as course features.
Learn more about thermodynamic path here: https://brainly.com/question/13433151
#SPJ2
what is 342 m/s in kilometers per hour?
Answer: 1231.2 km/h
Explanation: 342 x 3.6 ( because 1 m/s equal 3.6 km/h)
when a burning stick of increase is moved fast in a circle a circle of red light is seen.
Answer:
The impression of the image on the retina lasts for about 1/16th of a second after the removal of the object. If a burning stick of incense is revolved at a rate of more than sixteen revolutions per second, we see a circle of red light due to persistence of vision.
Explanation:
Complete the statement below about developing technology responsibly.
To develop technology responsibly, people must evaluate both the ____________ and the____________ consequences of the technology
Answer:
Positive & negative
Explanation:
To develop technology responsibly, people must evaluate both the immediate and the long-term consequences of the technology.
This entails considering not only the short-term benefits and potential gains but also the potential risks, ethical implications, and broader societal impacts that the technology may introduce. Responsible development requires a comprehensive analysis of how the technology could affect individuals, communities, economies, and the environment. Striking a balance between innovation and accountability is essential to ensure that the benefits of technology are maximized while minimizing any unintended harm. By thoroughly examining both the immediate and long-term consequences, developers can make informed decisions that prioritize the well-being of all stakeholders and foster a more sustainable technological landscape.
To know more about technological landscape, here
brainly.com/question/34008185
#SPJ3
In science, work is defined as:
force multiplied by the distance moved in a direction perpendicular to the force.
force multiplied by the distance moved in a direction parallel to the force.
the mass of an object multiplied by its acceleration.
the mass of an object multiplied by the force required to move it.
Answer:
Yes
Explanation: Thats exactly how it goes
In which condition work up done opposes to frictional force
Answer:
When any work is done against friction then work done opposes to frictional force.
Convergent plate boundaries are when plates
collide
move past each other
move apart
Explanation:
Collide is your answer
have a good day.
i need help asap!!!!!!!!!!!!
Answer:
B. the boy is not lifting more than 1m up, as the question states
why cannot an athlete stop instantaneously when he reaches the end in after the race
Explanation:
because his lower body is in inertia of motion.
Hope it helps
Why heavy vehicles usually have low velocity but possess high kinetic energy
The kinetic energy is high because, the mass of the object is large and thus has a great momentum and its velocity low because it has a large mass.
We know that kinetic energy of an object K = 1/2mv² where m = mass of the object and v = velocity of the object and its momentum, p = mv
For a given value of kinetic energy, the mass of the object m = 2K/v². This implies that m ∝ 1/v².
So, as the mass of the object increases, its velocity decreases.
So. an object with large mass has low velocity while an object with small mass has high velocity.
Also, the kinetic energy, K = 1/2mv². So, K ∝ mv². So, if m is large and v is small, the product mv² is large and thus K = 1/2mv² is high.
So, the kinetic energy of heavy vehicles is high because, the mass of the object is large and thus has a great momentum and its velocity low because it has a large mass.
Learn more about kinetic energy here:
https://brainly.com/question/23503524
A cup of sugar has a volume of 237ml . What is the mass of the cop of sugar if the density of sugar is 1.59g/ml?
Answer:
v=237ml m=? density(rho) = 1.59 g/ml
density = mass/volum
mass= (density)(volume)
m=(1.59)(237)
m=376.83g
Cody drives around a track that has a radius of 11460 m at a speed of 36 km/hr.
What distance did he go in one lap? (km)
What was his one lap displacement? (km)
What was his speed in km/hr?
What was his velocity in km/hr?
How long did one lap take him? (hours)
what is meant by an acceleration of negative 2metre per second square
means that a body is in motion, and its velocity is measured in meters per second. And, that velocity is increasing by two meters per second, every second.
........................
What is the potential energy of a rock that weighs 10.0 kg and is sitting on top of a hill 100 meters high?l
Answer:
9800 J
Explanation:
P.E = mgh
m = massg = gravitational accelerationh = heightP.E = (10.0)(9.8)(100) = 9800 J
fast help me I need help
Answer:
Pascal
it is derived of force and area
Answer:
none of the above
Explanation:
All of them are derived units
What does Δx stand for? What SI units are used to measure it?
Answer:
Displacement. Units of measure metre (m)
Explanation:
Delta x Δx stands for displacement, or change in position.
A speed versus time graph is shown:
A Speed versus Time graph is shown with y-axis labeled position in centimeters per second up to 5 and x-axis labeled time in seconds up to 8. A straight line connects the points 0, 0 and 4, 4. A horizontal line connects points 4, 4 and 8, 4.
Which statement accurately describes the motion of the object in the graph above?
Group of answer choices
It is moving from 0 s to 4 s at a constant speed of 2 cm/s.
It is at rest for 4 seconds from 4 s to 8 s and then speeds up.
It is moving from 4 s to 8 s at constant speed of 4 cm/s.
It is speeding up from 0 s to 4 s then it is at rest.
Answer:
it is moving from 4s to 8s at a constant
speed of 4 cm / s
A car of 900 kg mass is moving at the velocity of 60 km/hr. It is
brought into rest at 50 metre distance by applying brake. Now,
calculate the force required to stop the car. [Ans: 2500 N] class 9
Answer:
2500N.
Explanation:
SEE THE IMAGE FOR SOLUTION
HOPE IT HELPS
HAVE A GREAT DAY
Explanation:
Force = mass × acceleration
Mass = 900kg
Acceleration = velocity ÷ time
Velocity = 60km/hr = 60 × 1000 ÷ 3600
Velocity = 60000 ÷ 3600
Velocity = 16.67m/s
To get the time
Velocity = Distance ÷ time
16.67 = 50 ÷ time
Cross multiply
16.67 × time = 50
time = 50 ÷ 16.67
time = 3 seconds
Acceleration = 16.67 ÷ 3
Acceleration = 5.56m/s²
Therefore, Force = 900 × 5.56
Force = 5004 Newton
why is the base of the kettle made of plastic not metal?
Answer:
The metal base and the plastic housing are sealed together to complete the tea kettle body.
Explanation:
hope this helps :D
Read the PDF to help.
Explanation:
The answer is magnetic north pole
Which statement correctly compares the valence electrons for atoms of francium (Fr) and barium (Ba)?
(1 point)
Francium has more valence electrons, and they are in a higher energy level.
Barium has fewer valence electrons, but they are in a higher energy level.
Barium has more valence electrons, and they are in a higher energy level.
Francium has fewer valence electrons, but they are in a higher energy level.
From the Periodic Table...
Francium is a group 1 Element and Barium is a Group 2 Element
This statement is a giveaway as it already tells you that Barium has more valence electrons than Francium since it has 2 electrons in its Outer shell.
This Eliminates Options A and B
Francium has more electrons than Barium
So It should be at a higher energy level.
The correct statement is Francium has fewer valence electrons, but they are in a higher energy level.
The energy level of an element is the region of space around the nucleus where its electrons are found. This corresponds to the period of the element in the periodic table.
Francium is in period 7 in the periodic table (in energy level 7)Barium is in period 6 in the periodic table (in energy level 6)in the electronic configuration of Francium, the valence electron is in 7s¹in the electronic configuration of Barium, the valence electron is in 6s²Thus, we can conclude that, Francium has fewer valence electrons, but they are in a higher energy level.
Learn more here: https://brainly.com/question/16910375
The Big Bang theory is closely linked to Hubble's discovery that the universe is expanding, which seems to imply that there was a time in the past when the expansion first began. Nevertheless, the Big Bang theory did not gain widespread acceptance among scientists until the 1960s. Why wasn't expansion alone enough to convince scientists that the Big Bang really happened
Answer:
Although expansion seems to imply a Big Bang, no other specific predictions of the Big Bang theory were tested and confirmed until the 1960s.
Explanation:
Answer:
Today, the consensus among scientists, astronomers and cosmologists is that the Universe as we know it was created in a massive explosion that not only created the majority of matter, but the physical laws that govern our ever-expanding cosmos. This is known as The Big Bang Theory. For almost a century, the term has been bandied about by scholars and non-scholars alike. This should come as no surprise, seeing as how it is the most accepted theory of our origins.
;)
which energy is found in water store in dam?
a.kinetic energy
b.potential energy
c.chemical energy
d.both a and b
Answer:
d. both a and b
Answer:
potential energy
If I'm cold and want to warm up with an electric heater, which energy would I need in order to make the heater work?
a=light energy
b=electric energy
c=potential energy
d=mechanical energy
The answer would be B.) Electric Energy
Answer:
b.electric energy
we need electric energy to make the heater work.
Write the importance of international bureau of weight and measures in the country
Answer:
International Bureau of Weights and Measures (BIPM) is an international organization founded to bring about the unification of measurement systems, to establish and preserve fundamental international standards and prototypes, to verify national standards, and to determine fundamental physical constants. The bureau was established by a convention signed in Paris on May 20, 1875, effective January 1876. In 1921 a modified convention was signed. The convention provides for a General Conference that meets every four years to consider required improvements or modifications in standards. An International Committee of Weights and Measures, composed of 18 scientists elected by the conference, meets annually to monitor worldwide uniformity in units of measure.
Hope this helps!!! :)
(If not please comment I will try to help)
What happens as a result of changing the number of protons in an atom?
O The atom becomes an ion of the same element
O The atom becomes an isotope of the same element.
O The atom becomes a different element.
O Nothing changes.
Answer:
the atom becomes an isotope of the same element
Explanation:
isotopes are elements with the same atomic number but different mass number