The value of x in the given linear equation of 4x = 28 is determined as 7.
What is the value of x in the linear equation?
To find the value of x in the linear equation 4x = 28, we need to isolate x on one side of the equation.
We can do this by dividing both sides of the equation by 4:
4x/4 = 28/4
Simplifying:
x = 7
Thus, identify the equation and the variable: In this case, the equation is 4x = 28, and the variable we want to solve for is x. Also simplify the linear equation by dividing both sides by 4, we get x = 7, which is the solution.
Learn more about linear equation here: https://brainly.com/question/28732353
#SPJ1
The complete question is below:
4x = 28
find the value of x
a playground 98 ft long and 56 ft wide is to be resurfaced at a cost of $3.75 per sq ft what will the resurfacing cost?
Answer:L x b
98ft x 56ft =5488
=5488 / $3.75= $1463.47
Step-by-step explanation: Play ground is more like a rectangle so we use the formula for the rectrectangle to get total area . A=Lxb
Divide the total with the cost since it say each per sqr feet
A=lxb
98x56=5488
5488/3.75= 1463.47
which set of numbers can make the inequality below true? 26> n + 15
Answer:
[tex]26 > n + 15[/tex]
[tex]11 > n[/tex]
[tex]n < 11[/tex]
Tell whether the given value is a solution of the inequality.
q/5 < q-20; q=15
Answer:
No, q=15 is not a solution to the inequality.
Step-by-step explanation:
As given, q=15. So, substituting is the best way to solve this problem.
Step 1: Substitute
[tex]\frac{15}{5}=3[/tex]
[tex]15-20=-5[/tex]
Step 2: Substitute values into inequality
[tex]3 < -5[/tex]
Equation is false since 3 is a bigger value than -5.
Hope this helps ya!
You complete a hypothesis test using α = .05, and based on the evidence from the sample, your decision is to reject the null hypothesis. If the treatment actually has no effect, which of the following is true?
Question 10 options:
You have made a Type II error.
You have made a Type I error.
You have made the correct decision.
You might have made a Type I error, but the probability is only 5% at most.
The probability of making a Type I error is represented by alpha (α), which is typically set to 0.05 in hypothesis testing. Therefore, if α = .05, the likelihood of making a Type I error is 5% at most.
What is hypothesis testing? Hypothesis testing, also known as statistical hypothesis testing, is a technique used to evaluate two hypotheses about a population using sample data. One hypothesis, known as the null hypothesis (H0), proposes that there is no significant difference between a population parameter and a sample parameter, whereas the other hypothesis, known as the alternative hypothesis (H1), suggests that there is a significant difference between a population parameter and a sample parameter.You might have made a Type I error, but the probability is only 5% at most is true if you complete a hypothesis test using α = .05, and based on the evidence from the sample, your decision is to reject the null hypothesis, but the treatment actually has no effect. In the given situation, if the treatment actually has no effect, you might have made a Type I error, but the probability is only 5% at most. When the null hypothesis is rejected when it should not be, a Type I error occurs. The probability of making a Type I error is represented by alpha (α), which is typically set to 0.05 in hypothesis testing. Therefore, if α = .05, the likelihood of making a Type I error is 5% at most.
Learn more about hypothesis testing here, https://brainly.com/question/29350481
#SPJ11
A company produces and sells solar panels for $520. The company's daily profit, P(x), can be modeled by the function P(x) = −6x2 + 180x + 1,000, where x is the number of $5 price increases for each solar panel. Use the graph to answer the questions. Graph of function p of x equals negative 6 x squared plus 180 x plus 1,000. The graph has the x-axis labeled as number of price increases, and the y-axis labeled as profit. The curve begins at (0, 1000), increases to the vertex at about (15, 2350), and decreases through about (35, 0). Part A: Identify the approximate value of the y-intercept. Explain what the y-intercept means in terms of the problem scenario. (3 points) Part B: Identify the approximate value of the x-intercept. Explain what the x-intercept means in terms of the problem scenario. (3 points) Part C: Identify the approximate value of the maximum of the function. Explain what the maximum of the function means in terms of the problem scenario. (4 points)
The approximate value of the maximum of the function is 2350. In terms of the problem scenario this means that the company will make a maximum daily profit of $2350.
Part A:
The y-intercept is the point where the graph intersects the y-axis, which is when x = 0. Therefore, we can find the y-intercept by substituting x = 0 into the equation:
P(0) = -[tex]6(0)^2[/tex] + 180(0) + 1000
P(0) = 1000
The approximate value of the y-intercept is 1000. In terms of the problem scenario, this means that when the company doesn't increase the price of the solar panels (x = 0), the daily profit is $1000.
Part B:
The x-intercept is the point where the graph intersects the x-axis, which is when P(x) = 0. Therefore, we can find the x-intercept by solving the equation:
-[tex]6x^2[/tex] + 180x + 1000 = 0
We can use the quadratic formula to solve for x:
x = (
where a = -6, b = 180, and c = 1000
x = (-180 ± sqrt([tex]180^2[/tex] - 4(-6)(1000))) / 2(-6)
x = (-180 ± sqrt(32400 + 24000)) / (-12)
x = (-180 ± sqrt(56400)) / (-12)
x ≈ 4.4 or x ≈ 29.4
The approximate value of the x-intercept is 4.4 (or 29.4). In terms of the problem scenario, this means that the company would need to increase the price of the solar panels by approximately $22 (or $147) in order to break even and not make a profit or loss for the day.
Part C:
The maximum of the function occurs at the vertex of the parabola, which is given by the formula:
x = -b / 2a
In this case, a = -6 and b = 180, so:
x = -180 / 2(-6) = 15
To find the maximum profit, we can substitute x = 15 into the equation:
P(15) = -[tex]6(15)^2[/tex] + 180(15) + 1000
P(15) = 2350
The approximate value of the maximum of the function is 2350. In terms of the problem scenario, this means that the company will make a maximum daily profit of $2350 when they increase the price of the solar panels by $75 (i.e., 15 increments of $5).
Learn more about parabola here:
https://brainly.com/question/31142122
#SPJ1
Salespersons at the Kings Park Auto Giant are paid a commission, c(p), based on the profit, p. The following piecewise function gives the commission rules.
a. If the profit is $1,500, what is the percent commission rate?
b. If the profit is $900, what is the percent commission rate?
c. What is the commission on a car sold for a $970 profit?
d. Kings Park Auto Giant purchases a car for $32,090 and sells it for $33,200. What commission is paid to the salesperson?
Based on the provided information The seller received a fee of $122.
How much does the term "commission" mean?The term "commission" describes the payment made to the staff member after they successfully complete a job, which is frequently marketing a predetermined quantity of goods or services. Selling goods or services is difficult. Sales and marketing professionals must contend with fierce rivalry.
The commission rules are defined by the following piecewise function:
c(p) = 0.10p, if p ≤ 1,000
c(p) = 0.15p - 50, if 1,000 < p ≤ 1,500
c(p) = 0.20p - 125, if p > 1,500
a. If the profit is $1,500, the commission rate is calculated using the second rule:
c(1,500) = 0.15(1,500) - 50 = 175
The commission rate is $175 / $1,500 = 0.1167, or approximately 11.67%.
b. If the profit is $900, the commission rate is calculated using the first rule:
c(900) = 0.10(900) = 90
The commission rate is $90 / $900 = 0.10, or 10%.
c. To find the commission on a car sold for a $970 profit, we need to determine which rule applies. Since 970 is less than 1,000, we use the first rule:
c(970) = 0.10(970) = 97
The commission on a car sold for a $970 profit is $97.
d. The profit on the car sale is calculated as follows:
profit = selling price - purchase price = $33,200 - $32,090 = $1,110
To determine the commission, we need to identify the appropriate rule based on the profit amount. Since $1,110 is greater than $1,500, we use the third rule:
c(1,110) = 0.20(1,110) - 125 = 122
The commission paid to the salesperson is $122.
To know more about Commission visit:
https://brainly.com/question/24951536
#SPJ1
The voltage in an electrical circuit is multiplied by itself each time it is reduced. The voltage is 27/125 of a volt and it has been reduced three times. What is the voltage in exponential form?
Answer: x 3= 27/125
Step-by-step explanation:
for what mileages will company a charge less than company b? use for the number of miles driven, and solve your inequality for .
For the number of miles driven, Company A will charge less than Company B if x<y, where x is the number of miles driven for Company A and y is the number of miles driven for Company B. Therefore, the inequality is x<y.
When comparing two companies for their charges for a specific service, it is necessary to obtain a basic understanding of the charges for each company. You can make use of the inequality operator to check when one company will charge less than the other company.
To use the inequality operator, you'll need to calculate the differences between the two companies for the specific mileage. Let's assume that the mileage is represented by "m" and that the charge for company A is "cA" and the charge for company B is "cB".
If the question only provides specific numerical values for these variables, you can substitute them into the inequality formula. If you're given algebraic expressions, you'll need to simplify them before substituting them into the inequality formula.
The inequality formula for comparing the charges is as follows: cA < cB.
To use this formula, substitute the expression for each variable.
For example: 4m + 20 < 3.5m + 35 Now, you'll need to simplify the inequality by performing algebraic operations on both sides of the inequality. Begin by subtracting 3.5m from both sides of the inequality: 0.5m + 20 < 35.
Next, subtract 20 from both sides of the inequality: 0.5m < 15 Finally, divide both sides of the inequality by 0.5: m < 30
Therefore, Company A will charge less than Company B for any mileage less than 30.
Know more about inequality here:
https://brainly.com/question/25275758
#SPJ11
the letter t is formed by placing two $2\:\text{inch}\!\times\!4\:\text{inch}$ rectangles next to each other, as shown. what is the perimeter of the t, in inches?
The perimeter of the letter "T" is 22 inches.
Since the letter "T" is formed by placing two rectangles next to each other, its perimeter is the sum of the perimeters of the two rectangles minus the shared side.
The shared side will be the width of the rectangles, which is 2 inches.
The lengths of the rectangles are 4 inches each.
Let's calculate the perimeter:
Perimeter of the top rectangle = 2 * (length + width) = 2 * (4 + 2) = 12 inches
Perimeter of the bottom rectangle = 2 * (length + width) = 2 * (4 + 2) = 12 inches
Now, subtract the shared side (width) once:
Shared side = 2 inches
Total perimeter = (Perimeter of top rectangle + Perimeter of bottom rectangle) - Shared side
Total perimeter = (12 + 12) - 2 = 22 inches
So, the perimeter of the letter "T" is 22 inches.
Learn more about perimeter here:
brainly.com/question/397857
#SPJ12
The angle of depression from a lightbouse that is 32 meters in height to the base of a ship at the water’s edge measures 26°. To the nearest meter, hkw far js the ship to the base of the lighthouse?
The ship is about 65.6 meters away from the base of the lighthouse.
What is tangent function ?
Tangent is one of the three primary trigonometric functions, along with sine and cosine. In a right triangle, the tangent of an angle is defined as the ratio of the length of the side opposite the angle to the length of the adjacent side.
The tangent function is denoted by "tan" and is defined mathematically as:
tan(theta) = opposite / adjacent
where theta is the angle, opposite is the length of the side opposite the angle, and adjacent is the length of the side adjacent to the angle.
According to the question:
We can use trigonometry to solve this problem. Let's draw a right triangle with the lighthouse at the top, the ship at the bottom, and the line connecting them as the hypotenuse. The angle of depression of 26° is the angle between the hypotenuse and the horizontal line passing through the lighthouse. We know the height of the lighthouse is 32 meters.
Let x be the distance between the ship and the base of the lighthouse, which is the adjacent side of the angle of depression. Then we can use the tangent function:
tan(26°) = opposite / adjacent
We know the opposite side is the height of the lighthouse, which is 32 meters. Solving for x:
x = opposite / tan(26°)
x = 32 / tan(26°)
x ≈ 65.6 meters
Therefore, the ship is about 65.6 meters away from the base of the lighthouse.
To know more about tangent function visit:
https://brainly.com/question/29305357
#SPJ1
h + i3 where i = 1 and h = 19 caculate
Answer:22
Step-by-step explanation:
h + i3 = ?
19 + 1X3 = 22
Answer:
h + i3 = 22
Step-by-step explanation:
Given expression,
→ h + i3
→ h + 3(i)
Now we have to use,
→ i = 1
→ h = 19
Let's simplify the expression,
→ h + 3(i)
→ 19 + 3(1)
→ 19 + 3
→ 22 => {final answer}
Hence, the solution is 22.
an operation is performed on a batch of 100 units. setup time is 20 minutes and run time is 1 minute. the total number of units produced in an 8-hour day is:
The total number of units produced in an 8-hour day is approximately 22.86 units.
There are different ways to approach this problem, but one possible method is to use the concept of cycle time and the total available production time to determine the number of units produced in a day.
An operation is performed on a batch of 100 units.
Setup time is 20 minutes and run time is 1 minute.
The total number of units produced in an 8-hour day is:
Step 1: Find the cycle time per unitThe cycle time per unit is the sum of the setup time and the run time:
Cycle time = setup time + run time = 20 minutes + 1 minute = 21 minutes.
Step 2: Find the total available production time in a day
One day has 24 hours, but 8 hours are not available for production due to breaks, maintenance, and other factors. Therefore, the total available production time is:
Total available production time = 8 hours × (60 minutes per hour) = 480 minutes.
Step 3: Calculate the number of units produced in a day
The number of units produced in a day is the total available production time divided by the cycle time per unit:
Units produced = total available production time ÷ cycle time= 480 minutes ÷ 21 minutes≈ 22.86 units (rounded to two decimal places)
Therefore, the total number of units produced in an 8-hour day is approximately 22.86 units.
This assumes that there is no variability in the process, and that all units are of good quality.
If there are any defects, rework, or other disruptions, the actual production may be lower.
For similar question on approximately.
https://brainly.com/question/114935
#SPJ11
what is the sum of 5 4/5 + 2 2/3
Answer:
8 7/15
Step-by-step explanation:
4/5 and 2/3 need to a a common denomenator
4/5*3 and 2/3*5 = 12/15 and 10/15 so 5 12/15 + 2 10/15= 7 22/15= 8 7/15
In an isosceles triangle, measure of one of the angles is 30o. What are the measures of the other two angles? Select all that apply. Note that more than one option may be correct.
A. 30o, 120o
B. 40o, 110o
C. 75o, 75o
D. 50o, 100o
Answer: A and C
Step-by-step explanation:
angles in a triangle add up to 180
180 - 30 = 150
other two angles must add up to 150 and two of the angles have to be the same.
Since one is already 30, one of the others have to also be 30 or both of the others have to be the same.
A and C both add up to 150 and both of them have one angle repeating
A large company has offices in two locations, one in New Jersey and one in Utah. The mean salary of office assistants in the New Jersey office is $28,500. The mean salary of office assistants in the Utah office is $22,500. The New Jersey office has 128 office assistants and the Utah office has 32 office assistants. What is the mean salary paid to the office assistants in this company?
A. $22,500
B. $23,700
C. $25,500
D. $27,300
E. $28,500
Therefore, the mean salary paid to the office assistants in this company is $24,000.Answer: B. $24,000
A large company has offices in two locations, one in New Jersey and one in Utah. The mean salary of office assistants in the New Jersey office is $28,500. The mean salary of office assistants in the Utah office is $22,500. The New Jersey office has 128 office assistants and the Utah office has 32 office assistants. The mean salary paid to the office assistants in this company can be calculated by taking the weighted average of the mean salaries of the two offices.
Here's the formula to calculate the weighted average:
Weighted average = (weight1 × value1 + weight2 × value2) / (weight1 + weight2)
Where weight represents the number of data points, and value represents the mean salary of office assistants.
In this question, the weight of the New Jersey office is 128, and the weight of the Utah office is 32. The value of the New Jersey office is $28,500, and the value of the Utah office is $22,500.
Now let's plug in the values:
Weighted average = (128 × 28,500 + 32 × 22,500) / (128 + 32)
= (3,648,000 + 720,000) / 160
= 24,000
for such more questions on Weighted average
https://brainly.com/question/28507971
#SPJ11
you flip a coin 12 times. it lands on tails 9 times. what is the experimental probability of landing on heads?
Answer:
25%
Step-by-step explanation:
U flipped a coin 12 times, it lands on tail 9 times. Now the probability of landing on head = 12-9
= 3
In percentage= 12\3 *100
=25%
Answer:
0.25%
Step-by-step explanation:
What is the measure of Angle X?
Answer:
x = 79
Step-by-step explanation:
the exterior angle of a triangle is equal to the sum of the 2 opposite interior angles.
∠ BHC = x is an exterior angle of Δ BHD , then
x = 33 + 46 = 79
I need some help please
Answer:
3(2c + d) - 4(c - d) + d² = 32
Step-by-step explanation:
Now we have to,
→ Simplify the given expression.
We have to use,
→ d = 3
→ c = 1
The given expression is,
→ 3(2c + d) - 4(c - d) + d²
Let's simplify the expression,
→ 3(2c + d) - 4(c - d) + d²
→ 3(2(1) + 3) - 4(1 - 3) + 3²
→ 3(2 + 3) - 4(-2) + 9
→ 3(5) + 8 + 9
→ 15 + 17
→ 32 => {final answer}
Therefore, the answer is 32.
f(x)=x^3 shifted right 4 units
Answer:
f(x) = x ³ shifted 4 units to the right will be g(x) = f(x-4) = (x - 4)³
Step-by-step explanation:
If a function f(x) is shifted right 4 units every x coordinate will become x - 4
g(x) = f(x - 4) = (x - 4)³
hello! please help with 4-6!
please, i appreciate it!
also, happy ramadan!
Distributive property applied to 7(2x+5) - 4(2x+5)
To implement the distributing principle to the phrase 7(2x+5) - 4(2x+5), we must first divide the 7 and 4 within the parenthesis to their respective terms:
7(2x+5) - 4(2x+5) = (72x + 75) - (42x + 45)
Within the parenthesis, each term is simplified:
= (14x + 35) - (8x + 20)
We may now reduce the phrase by grouping similar terms:
= 14x - 8x + 35 - 20
= 6x + 15
As a consequence, using the distributive property on 7(2x+5) - 4(2x+5) yields 6x + 15.
By expansion or multiplying, the distribution principle is frequently employed to compress statements and solve problems. It enables us to translate complicated statements into shorter language and conversely. The distributive principle is commonly utilized in mathematics, mathematics, as well as other mathematical subjects.
To know more about multiplying click here
brainly.com/question/25114566
#SPJ9
2. a. There is a new family called the Grump family. Mr. Grump's rule is (x,y). Circle the rules that
his family members in red. Circle the imposters in blue.
(3x,3y)
(2x,y)
(x,4y)
(4x,4y)
(6x, 5y)
(9x, 9y)
(0.3x, 0.3Y)
six distinct integers are picked at random from . what is the probability that, among those selected, the second smallest is ?
The probability that the second smallest integer from a set of six distinct integers is picked at random is the same as the probability that the first smallest is 1.
This can be expressed mathematically as:
P(second smallest) = P(first smallest).
The probability of the first smallest integer is the number of combinations that result in the first smallest number divided by the total number of possible combinations of six distinct integers.
For example, if we have six distinct integers in a set, A, B, C, D, E, and F, the probability of A being the first smallest is the number of combinations that result in A being the smallest divided by the total number of combinations.
The combinations that result in A being the smallest are {A, B, C, D, E, F}, {B, A, C, D, E, F}, {C, A, B, D, E, F}, and so on. That’s a total of 6 combinations out of the total possible number of combinations, which is 6 x 5 x 4 x 3 x 2 x 1 = 720.
Therefore, P(first smallest) = 6/720 = 1/120. Similarly, the probability of the second smallest number being the same is also 1/120.
To know more about probability refer here:
https://brainly.com/question/30034780
#SPJ11
Solve: You have a machine with a screen and three buttons: red, green, and blue. If you press the red button, the number on the screen is doubled. If you press the green button, the number on the screen is tripled. If you press the blue button, the number on the screen is multiplied by itself. The number 1 is displayed on the screen. What is the least number of times you need to press a button to get the number 2592 on the screen.
Thus, the least number of times the button need to be pressed is: red- 4 times, green 3 times and blue button 6 times.
Explain about the prime factorization?The technique of expressing all numbers as the product of primes is known as prime factorization. So, let's take something like the number 20 as an example. It can be divided into two components. "Well, that's 4 times 5," we can respond. Observe that 5 is a prime number.
Given data:
Red - The number displayed on the screen doubles if you hit the red button say (x²) green - The number displayed on the screen is tripled if you push the green button say (y³)blue- The number shown on the display is multiplied by itself when you hit the blue button say (z).The number formed as:
(x²) .(y³).(z) ...eq 1
Number appeared on screen - 2592
Find the prime factors of 2592.
2592 = 2 x 2 x 2 x 2 x 2 x 3 x 3 x 3 x 3 x 3
This can be written as:
2592 = 4² x 3³ x 2 x 3
2592 = 4² x 3³ x 6¹ .....eq 2
comparing eq 1 and 2
(x²) .(y³).(z) = 4² x 3³ x 6¹
x = 4, y = 3 and z = 6
Thus, the least number of times the button need to be pressed is: red- 4 times, green 3 times and blue button 6 times.
Know more about the prime factorization
https://brainly.com/question/1911965
#SPJ1
You measure 41 randomly selected textbooks' weights, and find they have a mean weight of 39 ounces. Assume the population standard deviation is 2.8 ounces. Based on this, construct a 99% confidence interval for the true population mean textbook weight. Give your answers as decimals, to two places afe
The 99% confidence interval for the true population mean textbook weight is (38.11, 39.89) ounces.
We can find the standard error (SE) by using the formula:
SE = σ/√n
Where
σ = population standard deviation = 2.8 ounces
n = sample size = 41
SE = 2.8/√41
SE = 0.436
Now we can find the confidence interval by using the formula:
CI = x ± z*SE
Where
x = sample mean = 39 ounces
z* = the z-value corresponding to the level of confidence of 99 percent
The z-value corresponding to the level of confidence of 99 percent can be found using the z-table or calculator. It is found to be 2.576.
CI = 39 ± 2.576*0.436
CI = (38.11, 39.89)
Therefore, we can say that we are 99% confident that the true population mean textbook weight is between the interval (38.11, 39.89) ounces.
Learn more about confidence interval here: https://brainly.com/question/17097944
#SPJ11
which is an x-intercept of the graphed function?
The x-intercepts of the graphed function are:
(-2, 0), (-1, 0), (1, 0), and (2, 0)
How to identify the x-intercepts of the graphed function?For any function, we define the x-intercepts as the values of x such that y= 0, when we have a graph we can identify these values as the values of x at which the graph intercepts the x-axis.
Remember that the x-axis is the horizontal one, then, we can look at the graph and identifty the 4 x-intercepts, these are at the values of x:
x = -2
x = -1
x = 1
x = 2
Writting them in point notation, these are (-2, 0), (-1, 0), (1, 0), and (2, 0)
Learn more about x-intercepts at:
https://brainly.com/question/24363347
#SPJ1
The area of a rectangular pool is 5056 m². If the width of the pool is 64 m, what is its length?
Answer:
79
Step-by-step explanation:
Using the formula
A=wl
Solving forl
l=A
w=5056
64=79m
To find area, you multiply the width by the length [tex]( \text{A} = \text{L} \times \text{W})[/tex]. Here, it is asking for the length, giving the area of the pool and the width. With this information, you can inverse operation ( division) to find the length of the pool. So:
[tex]5056 \div 64 = 79[/tex]
This tells us that the length of the pool is 79 meters. To check this answer, multiply 64 and 79. If it's equivalent to 5056, the given area, then 79 is indeed the length of the pool.
[tex]64 \times79 = 5056[/tex].
Thus, the length of the pool is 79 m.
Triangle DEF has vertices at D(−3, 5), E(−10, 4), and F(−11, 8). Triangle D′E′F′ is the image of triangle DEF after a reflection. Determine the line of reflection if E′ is located at (10, 4).
y = −4
x = 10
y-axis
x-axis
The line of reflection is the y-axis
What is Reflection:Reflection is a geometric transformation that involves flipping an object over a line or a plane, creating a mirror image of the original object.
When a figure or polygon is reflected over the y-axis, it means that each point in the original figure is moved to a new point with the same y-coordinate but a negated x-coordinate.
Here we have
Triangle DEF has vertices at D(−3, 5), E(−10, 4), and F(−11, 8).
Triangle D′E′F′ is the image of triangle DEF after a reflection.
After reflection, the vertice E′ is located at (10, 4).
Here the x-coordinate of E, − 10 is changed to 10
As we know when the figure is reflected over the y-axis the sign of the x coordinate will be changes
Hence,
The line of reflection is the y-axis
Learn more about Reflection at
https://brainly.com/question/14808137
#SPJ1
find the distance between (-8,-1) and (-8,4)
A. -5
B. 5
C. 11
D. 14
The distance between the two points (-8,-1) and (-8,4) is 5 units.
What is distance formula?The distance formula is a mathematical formula used to find the distance between two points in a two-dimensional or three-dimensional coordinate system.
According to question:The distance between two points (x1, y1) and (x2, y2) in a two-dimensional coordinate system can be found using the distance formula:
d = √((x2 - x1)² + (y2 - y1)²)
In this case, the two points are (-8, -1) and (-8, 4). Therefore, we can substitute the values into the formula:
d = √((-8 - (-8))² + (4 - (-1))²)
= √(0² + 5²)
= √(25)
= 5
Therefore, the distance between the two points is 5 units, so the answer is (B) 5.
To know more about distance visit:
https://brainly.com/question/25841655
#SPJ1
because we do not know if the population distribution is approximately normal. because the large sample condition is not met. they should proceed, all of the conditions are met. because the 10% condition is not met. because the random condition is not met.
To use the normal approximation for the confidence interval in the sampling distribution of the population proportion, the following conditions must be met:
The sample size should be large enough (np ≥ 10 and n(1-p) ≥ 10), where n is the sample size and p is the population proportion. The observations should be independent. The population size should be at least 10 times larger than the sample size.If these conditions are met, then the distribution of the sample proportion can be approximated by a normal distribution with a mean of p and a standard deviation of sqrt(p*(1-p)/n).
Learn more about population proportion
https://brainly.com/question/15087042
#SPJ4
Full Question ;
The sampling distribution of the population proportion is based on a binomial distribution. What condition must be met to use the normal approximation for the confidence interval?