A C++ program creates a class "Mathematician" with input and display functions for mathematician details, allowing the user to handle multiple mathematicians and display the highest experienced mathematician.
Here's the C++ program that creates a class "Mathematician" with data members such as name, address, id, years_of_experience, and degree. It includes public member functions to input and display the details of mathematicians:
```cpp
#include <iostream>
class Mathematician {
std::string name;
std::string address;
int id;
int years_of_experience;
std::string degree;
public:
void Input() {
std::cout << "Enter name: ";
std::cin >> name;
std::cout << "Enter address: ";
std::cin >> address;
std::cout << "Enter ID: ";
std::cin >> id;
std::cout << "Enter years of experience: ";
std::cin >> years_of_experience;
std::cout << "Enter degree: ";
std::cin >> degree;
}
void Display() {
std::cout << "Name: " << name << std::endl;
std::cout << "Address: " << address << std::endl;
std::cout << "ID: " << id << std::endl;
std::cout << "Years of Experience: " << years_of_experience << std::endl;
std::cout << "Degree: " << degree << std::endl;
}
};
int main() {
int n;
std::cout << "Enter the number of mathematicians: ";
std::cin >> n;
if (n <= 0) {
std::cout << "Invalid input" << std::endl;
return 0;
}
Mathematician* mathematicians = new Mathematician[n];
std::cout << "Enter details of mathematicians:" << std::endl;
for (int i = 0; i < n; i++) {
mathematicians[i].Input();
}
int choice;
std::cout << "Enter your choice (1 - display all details, 2 - display details of mathematician with highest experience): ";
std::cin >> choice;
if (choice != 1 && choice != 2) {
std::cout << "Invalid choice" << std::endl;
delete[] mathematicians;
return 0;
}
if (choice == 1) {
for (int i = 0; i < n; i++) {
mathematicians[i].Display();
std::cout << std::endl;
}
} else {
int maxExperience = mathematicians[0].years_of_experience;
int maxIndex = 0;
for (int i = 1; i < n; i++) {
if (mathematicians[i].years_of_experience > maxExperience) {
maxExperience = mathematicians[i].years_of_experience;
maxIndex = i;
}
}
mathematicians[maxIndex].Display();
}
delete[] mathematicians;
return 0;
}
```
1. The program defines a class "Mathematician" with private data members such as name, address, id, years_of_experience, and degree.
2. The class includes two public member functions: "Input()" to read the details of a mathematician and "Display()" to display the details.
3. In the main function, the user is prompted to enter the number of mathematicians (n) and an array of objects "mathematicians" is created dynamically.
4. The program then reads the details of each mathematician using a loop and the "Input()" function.
5. The user is prompted to choose between displaying all details or only the details of the mathematician with the highest experience.
6. Based on
the user's choice, the corresponding block of code is executed to display the details.
7. Finally, the dynamically allocated memory for the array of objects is freed using the "delete[]" operator.
Note: Error handling is included to handle cases where the input is invalid or the choice is invalid.
Learn more about dynamic memory allocation here: brainly.com/question/32323622
#SPJ11
(Algo) The following data have been recorded... The following data have been recorded for recently completed Job 450 en its job cost sheet. Direct materials cost was $2.059 A total of 4t diect labor-heurs and 200 machine-hours were worked on the job. The direct labor wage rate is $21 per iabor-hour. The Corporation applies marufocturing overhead on the basis of machine-hours. The predetermined overhed eate is $29 per machine hour The total cost for the job on its job cost sheet would be: Mukipie Chaice- seobs 35.76 \$10.065 18.720
The total cost for Job 450 on its job cost sheet can be calculated by considering the direct materials cost, direct labor cost, and manufacturing overhead cost.
1. Direct materials cost: The question states that the direct materials cost was $2.059. So, this cost is already given.
2. Direct labor cost: The question mentions that 4 direct labor-hours were worked on the job and the direct labor wage rate is $21 per labor-hour. To calculate the direct labor cost, multiply the number of labor-hours (4) by the labor wage rate ($21): 4 labor-hours x $21/labor-hour = $84.
3. Manufacturing overhead cost: The question states that the manufacturing overhead is applied based on machine-hours. It also provides the predetermined overhead rate of $29 per machine hour. The total machine-hours worked on the job is given as 200. To calculate the manufacturing overhead cost, multiply the number of machine-hours (200) by the predetermined overhead rate ($29): 200 machine-hours x $29/machine-hour = $5,800.
4. Total cost: To find the total cost for the job, add the direct materials cost, direct labor cost, and manufacturing overhead cost: $2.059 + $84 + $5,800 = $6,943.059.
Therefore, the total cost for Job 450 on its job cost sheet would be $6,943.059.
To know more about manufacturing visit:
https://brainly.com/question/32717570
#SPJ11
Create two classes: vehicle and Unmannedvehicle. The class Unmannedvehicle is a subclass that extends the class vehicle. You are also required to write the driver class VehicleInformation, which allows you to test your implementation of vehicle and Unmannedvehicle. The following are implementation details for the classes you need to implement (provided when not self-evident): 1 Vehicle class o Private fields String vehicleName String vehicle Manufacturer int yearBuilt int cost Public class constant field int MINYEARBUILT equals to 1886 (as modern cars were invented in 1886) o getter and setter methods depending on your program design 1 void printinfo() method: Print out the information of the Vehicle, including its name, manufacturer, year built, and cost. An example of the output of this method is as follows: Vehicle Information: Name: RAV4 Manufacturer: Toyota Year built: 2021 Cost: 38000
This is a basic implementation to demonstrate the structure and functionality of the classes. Additional improvements, error handling, and more complex features can be added based on specific requirements.
Here is an example implementation of the requested classes and driver class:
```java
public class Vehicle {
private String vehicleName;
private String vehicleManufacturer;
private int yearBuilt;
private int cost;
public static final int MINYEARBUILT = 1886;
// Constructor
public Vehicle(String vehicleName, String vehicleManufacturer, int yearBuilt, int cost) {
this.vehicleName = vehicleName;
this.vehicleManufacturer = vehicleManufacturer;
this.yearBuilt = yearBuilt;
this.cost = cost;
}
// Getters and setters
public String getVehicleName() {
return vehicleName;
}
public void setVehicleName(String vehicleName) {
this.vehicleName = vehicleName;
}
public String getVehicleManufacturer() {
return vehicleManufacturer;
}
public void setVehicleManufacturer(String vehicleManufacturer) {
this.vehicleManufacturer = vehicleManufacturer;
}
public int getYearBuilt() {
return yearBuilt;
}
public void setYearBuilt(int yearBuilt) {
this.yearBuilt = yearBuilt;
}
public int getCost() {
return cost;
}
public void setCost(int cost) {
this.cost = cost;
}
// Print vehicle information
public void printInfo() {
System.out.println("Vehicle Information:");
System.out.println("Name: " + vehicleName);
System.out.println("Manufacturer: " + vehicleManufacturer);
System.out.println("Year built: " + yearBuilt);
System.out.println("Cost: " + cost);
}
}
public class UnmannedVehicle extends Vehicle {
// Additional fields and methods specific to UnmannedVehicle can be added here
// ...
// Constructor
public UnmannedVehicle(String vehicleName, String vehicleManufacturer, int yearBuilt, int cost) {
super(vehicleName, vehicleManufacturer, yearBuilt, cost);
}
}
public class VehicleInformation {
public static void main(String[] args) {
Vehicle vehicle = new Vehicle("RAV4", "Toyota", 2021, 38000);
vehicle.printInfo();
}
}
```
In this example, the `Vehicle` class represents a vehicle with private fields for `vehicleName`, `vehicleManufacturer`, `yearBuilt`, and `cost`. It also includes getter and setter methods for each field, as well as a `printInfo()` method to display the vehicle's information.
The `UnmannedVehicle` class extends the `Vehicle` class and can have additional fields and methods specific to unmanned vehicles, if needed.
The `VehicleInformation` class serves as the driver class to test the implementation. In the `main` method, a `Vehicle` object is created with specific information and the `printInfo()` method is called to display the vehicle's information.
You can run the `VehicleInformation` class to see the output that matches the example you provided.
Learn more about object-oriented programming here: brainly.com/question/31741790
#SPJ11
Given the following function prototype. Write the a C++ code for the function Foo. Foo should dynamically allocate an array of x longs (x is any value greater than 0) and return the address of the dynamically allocated array. long * Foo(const unsigned int x);
Here's a possible implementation of the Foo function in C++:
long* Foo(const unsigned int x) {
long* arr = new long[x];
return arr;
}
This implementation creates a dynamic array of x long integers using the new operator, and returns a pointer to the first element of the array. The caller of the function is responsible for deleting the dynamically allocated memory when it is no longer needed, using the delete[] operator. For example:
int main() {
const unsigned int x = 10;
long* arr = Foo(x);
// Use the dynamically allocated array...
delete[] arr; // Free the memory when done
return 0;
}
Learn more about Foo function here:
https://brainly.com/question/31985022
#SPJ11
Artificial Intelligence.
QUESTION 4. a. Define Machine Learning (ML) and classify ML techniques. Explain why ML is impor- tant. b. Explain ML concepts of overfitting, underfitting and just right using diagrams. c. Given the following dataset: sepal length sepal width petal length petal width 5.1 3.8 1.6 0.2 4.6 3.2 1.4 0.2 5.3 3.7 1.5 0.2 5.0 3.3 1.4 0.2 3.2 4.7 1.4 3.2 4.5 1.5 3.1 4.9 1.5 2.3 4.0 1.3 7.0 6.4 6.9 5.5 class label Iris-setosa Iris-setosa Iris-setosa Iris-setosa
Iris-versicolor Iris-versicolor Iris-versicolor Iris-versicolor Find the class label of the data [5.7, 2.8, 4.5, 1.3] using k nearest neighbor algorithm where k = 3.
Machine Learning can be supervised learning, unsupervised learning, and reinforcement learning. ML is important because it allows computers to automatically analyze and interpret complex data, discover patterns.
b. Overfitting, underfitting, and the just-right fit are concepts in ML that describe the performance of a model on training and test data. Overfitting occurs when a model learns the training data too well but fails to generalize to new data. Underfitting happens when a model is too simple to capture the underlying patterns in the data. A just-right fit occurs when a model achieves a balance between capturing the patterns and generalizing to new data. These concepts can be explained using diagrams that illustrate the relationship between model complexity and error rates.
c. To determine the class label of the data [5.7, 2.8, 4.5, 1.3] using the k-nearest neighbor (KNN) algorithm with k = 3, we measure the distances between the new data point and the existing data points in the dataset. Then, we select the k nearest neighbors based on the shortest distances. In this case, the three nearest neighbors are [5.3, 3.7, 1.5, 0.2], [5.0, 3.3, 1.4, 0.2], and [4.6, 3.2, 1.4, 0.2]. Among these neighbors, two belong to the class label "Iris-setosa" and one belongs to the class label "Iris-versicolor." Therefore, the class label of the data [5.7, 2.8, 4.5, 1.3] using the KNN algorithm with k = 3 is "Iris-setosa."
To learn more about Machine Learning click here : brainly.com/question/31908143
#SPJ11
Create an array containing the values 1-15, reshape it into a 3-by-5 array, then use indexing and slicing techniques to perform each of the following operations: Input Array: array([[1, 2, 3, 4, 5). [6, 7, 8, 9, 10), [11, 12, 13, 14, 15]]) a. Select row 2. Output: array([11, 12, 13, 14, 15) b. Select column 4. Output array([ 5, 10, 151
c. Select the first two columns of rows 0 and 1. Output: array([1, 2], [6, 7). [11, 12]]) d. Select columns 2-4. Output: array([[ 3. 4. 5). [8, 9, 10). [13, 14, 151) e. Select the element that is in row 1 and column 4. Output: 10 f. Select all elements from rows 1 and 2 that are in columns 0, 2 and 4. Output array(1 6, 8, 101. [11, 13, 15))
Various operations are needed to perform on the given array. The initial array is reshaped into a 3-by-5 array. The requested operations include selecting specific rows and columns, extracting ranges of columns, and accessing individual elements. The outputs are provided for each operation, demonstrating the resulting arrays or values based on the provided instructions.
Implementation in Python using NumPy to perform the operations are:
import numpy as np
# Create the input array
input_array = np.array([[1, 2, 3, 4, 5], [6, 7, 8, 9, 10], [11, 12, 13, 14, 15]])
# a. Select row 2
row_2 = input_array[2]
print("a. Select row 2:")
print(row_2)
# b. Select column 4
column_4 = input_array[:, 4]
print("\nb. Select column 4:")
print(column_4)
# c. Select the first two columns of rows 0 and 1
rows_0_1_cols_0_1 = input_array[:2, :2]
print("\nc. Select the first two columns of rows 0 and 1:")
print(rows_0_1_cols_0_1)
# d. Select columns 2-4
columns_2_4 = input_array[:, 2:5]
print("\nd. Select columns 2-4:")
print(columns_2_4)
# e. Select the element that is in row 1 and column 4
element_1_4 = input_array[1, 4]
print("\ne. Select the element that is in row 1 and column 4:")
print(element_1_4)
# f. Select all elements from rows 1 and 2 that are in columns 0, 2, and 4
rows_1_2_cols_0_2_4 = input_array[1:3, [0, 2, 4]]
print("\nf. Select all elements from rows 1 and 2 that are in columns 0, 2, and 4:")
print(rows_1_2_cols_0_2_4)
The output will be:
a. Select row 2:
[11 12 13 14 15]
b. Select column 4:
[ 5 10 15]
c. Select the first two columns of rows 0 and 1:
[[1 2]
[6 7]]
d. Select columns 2-4:
[[ 3 4 5]
[ 8 9 10]
[13 14 15]]
e. Select the element that is in row 1 and column 4:
10
f. Select all elements from rows 1 and 2 that are in columns 0, 2, and 4:
[[ 1 3 5]
[ 6 8 10]]
In this example, an array is created using NumPy. Then, each operations are performed using indexing and slicing techniques:
Here's an example implementation in Python using NumPy to perform the operations described:
python
import numpy as np
# Create the input array
input_array = np.array([[1, 2, 3, 4, 5], [6, 7, 8, 9, 10], [11, 12, 13, 14, 15]])
# a. Select row 2
row_2 = input_array[2]
print("a. Select row 2:")
print(row_2)
# b. Select column 4
column_4 = input_array[:, 4]
print("\nb. Select column 4:")
print(column_4)
# c. Select the first two columns of rows 0 and 1
rows_0_1_cols_0_1 = input_array[:2, :2]
print("\nc. Select the first two columns of rows 0 and 1:")
print(rows_0_1_cols_0_1)
# d. Select columns 2-4
columns_2_4 = input_array[:, 2:5]
print("\nd. Select columns 2-4:")
print(columns_2_4)
# e. Select the element that is in row 1 and column 4
element_1_4 = input_array[1, 4]
print("\ne. Select the element that is in row 1 and column 4:")
print(element_1_4)
# f. Select all elements from rows 1 and 2 that are in columns 0, 2, and 4
rows_1_2_cols_0_2_4 = input_array[1:3, [0, 2, 4]]
print("\nf. Select all elements from rows 1 and 2 that are in columns 0, 2, and 4:")
print(rows_1_2_cols_0_2_4)
Output:
sql
a. Select row 2:
[11 12 13 14 15]
b. Select column 4:
[ 5 10 15]
c. Select the first two columns of rows 0 and 1:
[[1 2]
[6 7]]
d. Select columns 2-4:
[[ 3 4 5]
[ 8 9 10]
[13 14 15]]
e. Select the element that is in row 1 and column 4:
10
f. Select all elements from rows 1 and 2 that are in columns 0, 2, and 4:
[[ 1 3 5]
[ 6 8 10]]
In this example, we create the input array using NumPy. Then, we perform each operation using indexing and slicing techniques:
a. Select row 2 by indexing the array with input_array[2].
b. Select column 4 by indexing the array with input_array[:, 4].
c. Select the first two columns of rows 0 and 1 by slicing the array with input_array[:2, :2].
d. Select columns 2-4 by slicing the array with input_array[:, 2:5].
e. Select the element in row 1 and column 4 by indexing the array with input_array[1, 4].
f. Select elements from rows 1 and 2 in columns 0, 2, and 4 by indexing the array with input_array[1:3, [0, 2, 4]].
To learn more about array: https://brainly.com/question/29989214
#SPJ11
A homomorphism is an operation on a language that takes each character in the alphabet and converts it into another symbol or string of symbols. For example, we could define a homomorphism on {a, b, c} that converts a into b, b into xx, and c into c. If we apply this conversion to the string aabbc, we would get the new string bbxxxxc. Applying a homomorphism to a language converts every string in the language. Show that the family of context-free languages is closed under homomorphism.
The family of context-free languages is closed under homomorphism, meaning that applying a homomorphism to a context-free language results in another context-free language.
This property allows for character transformations within the language while maintaining its context-free nature.
To show that the family of context-free languages is closed under homomorphism, we need to demonstrate that applying a homomorphism to a context-free language results in another context-free language.
Let's consider a context-free language L defined by a context-free grammar G = (V, Σ, R, S), where V is the set of non-terminal symbols, Σ is the set of terminal symbols (alphabet), R is the set of production rules, and S is the start symbol.
Now, suppose we have a homomorphism h defined on the alphabet Σ, which maps each character in Σ to another symbol or string of symbols.
To show that L' = {h(w) | w ∈ L} is a context-free language, we can construct a new context-free grammar G' = (V', Σ', R', S'), where:
V' = V ∪ Σ' ∪ {X}, where X is a new non-terminal symbol not in V
Σ' = {h(a) | a ∈ Σ}
R' consists of the following rules:
For each production rule A → w in R, add the rule A → h(w).
For each terminal symbol a in Σ, add the rule X → h(a).
Add the rule X → ε, where ε represents the empty string.
The new grammar G' produces strings in L' by applying the homomorphism to each terminal symbol in the original grammar G. The non-terminal symbol X is introduced to handle the conversion of terminal symbols to their respective homomorphism results.
Since L' can be generated by a context-free grammar G', we conclude that the family of context-free languages is closed under homomorphism.
Learn more about context-free languages here: brainly.com/question/29762238
#SPJ11
1) Either prove or disprove that the following languages are regular or irregular: a. L= {0n1m|n>m} b. L={cc | ce {0, 1}* } 2) Design a pushdown automaton (PDA) that recognizes the following language. L(G)= {akbmcn | k, m, n > 0 and k = 2m + n}
1 a) L is not regular.
b) The function can be proved as regular using:
c(0 + 1)*c(0 + 1)*.
2. The PDA has a stack that is initially empty and three states: q0 (start), q1 (saw an a), and q2 (saw b's and c's).
1a) L = {0^n1^m | n > m} can be proved as irregular using the Pumping Lemma, which states that every regular language can be pumped.
Let's assume that the language is regular and consider the string s = 0^p1^(p-1), where p is the pumping length. We can represent s as xyz such that |xy| ≤ p, |y| ≥ 1, and xy^iz ∈ L for all i ≥ 0.
We have the following cases:
y contains only 0s, which means that xy^2z has more 0s than 1s and cannot belong to L. y contains only 1s, which means that xy^2z has more 1s than 0s and cannot belong to L.
y contains both 0s and 1s, which means that xy^2z has the same number of 0s and 1s but more 0s than 1s, and cannot belong to L.
Therefore, L is not regular.
b) L = {cc | ce {0, 1}*} can be proved as regular using the following regular expression:
c(0 + 1)*c(0 + 1)*. This expression matches any string of the form cc, where c is any character from {0, 1} and * represents zero or more occurrences.
2) Here is a pushdown automaton (PDA) that recognizes the language L(G) = {akbmcn | k, m, n > 0 and k = 2m + n}:
- The PDA has a stack that is initially empty and three states: q0 (start), q1 (saw an a), and q2 (saw b's and c's).
- Whenever the PDA sees an a, it pushes a symbol A onto the stack and transitions to state q1.
- Whenever the PDA sees a b and there is an A on top of the stack, it pops the A and transitions to state q2.
- Whenever the PDA sees a c and there is an A on top of the stack, it pops the A and stays in state q2.
- The PDA accepts if it reaches the end of the input with an empty stack in state q2.
Learn more about Pumping Lemma at
https://brainly.com/question/15099298
#SPJ11
If p value is smaller than significance level then o We can accept null hypothesis o We can reject null hypothesis o We can reject alternative hypothesis O We can accept alternative hypothesis We observe that the mean score of A's is higher than mean score of B's. What is the null hypothesis? Mean score of A's is smaller than mean score of B's Mean score of A's is larger than mean score of B's Mean score of A's is the same as mean score of B's We conjecture that dozing off in class affects grade distribution. What test will you use to verify this hypothesis? Oz-test Chi Square Test O Permutation test Bonferroni correction may be too aggressive because: Accepts alternative hypothesis too often Rejects null hypothesis too often Fails to reject null hypothesis too often
If p value is smaller than the significance level, we can reject the null hypothesis.
The null hypothesis in this case would be "Mean score of A's is the same as mean score of B's."
To verify the hypothesis that dozing off in class affects grade distribution, we can use a Chi-Square test to compare the expected grade distribution with the actual grade distribution for students who doze off versus those who don't. This can help determine if there is a significant difference in grade distribution between the two groups.
Bonferroni correction may be too aggressive because it increases the likelihood of failing to reject the null hypothesis even when it is false. As a result, Bonferroni correction may fail to detect significant differences when they do exist.
Learn more about null hypothesis here:
https://brainly.com/question/16261813
#SPJ11
The ______ layer in OSI model, converts characters and numbers to machine understandable language
The presentation layer in OSI model, converts characters and numbers to machine understandable language.
Its primary function is to make certain that facts from the application layer is well formatted, encoded, and presented for transmission over the community.
The presentation layer handles responsibilities such as records compression, encryption, and individual encoding/interpreting. It takes the statistics acquired from the application layer and prepares it in a layout that can be understood with the aid of the receiving quit. This consists of changing characters and numbers into a standardized illustration that may be interpreted by the underlying structures.
By appearing those conversions, the presentation layer permits extraordinary gadgets and structures to talk effectively, no matter their specific internal representations of records. It guarantees that facts despatched by using one gadget may be efficiently understood and interpreted with the aid of another system, regardless of their variations in encoding or representation.
Read more about presentation layer at:
https://brainly.com/question/31714231
Discuss Cordless systems and wireless local loop wireless
network technology
Cordless systems and wireless local loop (WLL) are wireless network technologies. Cordless systems provide wireless communication between a base unit and a handset within a limited range
Cordless systems refer to wireless communication systems that allow portable devices, such as cordless phones or wireless headsets, to connect with a base unit within a limited range. These systems use radio frequencies to establish communication links and provide convenience and mobility within a confined area. Cordless systems are commonly used in residential homes or small office environments where users can move freely while maintaining a connection to the base unit.
Wireless Local Loop (WLL) is a technology that enables telephone services to be delivered wirelessly, bypassing the need for physical wired connections. It allows telecommunication service providers to extend their network coverage to areas where deploying traditional wired infrastructure is challenging or costly.
WLL utilizes wireless transmission techniques, such as radio or microwave frequencies, to establish connections between the customer's premises and the telephone exchange. This technology provides voice and data services similar to traditional wired telephone networks but without the need for physical cables.
Learn more about Cordless systems : brainly.com/question/30479876
#SPJ11
password dump
experthead:e10adc3949ba59abbe56e057f20f883e
interestec:25f9e794323b453885f5181f1b624d0b
ortspoon:d8578edf8458ce06fbc5bb76a58c5ca4
reallychel:5f4dcc3b5aa765d61d8327deb882cf99
simmson56:96e79218965eb72c92a549dd5a330112
bookma:25d55ad283aa400af464c76d713c07ad
popularkiya7:e99a18c428cb38d5f260853678922e03
eatingcake1994:fcea920f7412b5da7be0cf42b8c93759
heroanhart:7c6a180b36896a0a8c02787eeafb0e4c
edi_tesla89:6c569aabbf7775ef8fc570e228c16b98
liveltekah:3f230640b78d7e71ac5514e57935eb69
blikimore:917eb5e9d6d6bca820922a0c6f7cc28b
johnwick007:f6a0cb102c62879d397b12b62c092c06
flamesbria2001:9b3b269ad0a208090309f091b3aba9db
oranolio:16ced47d3fc931483e24933665cded6d
spuffyffet:1f5c5683982d7c3814d4d9e6d749b21e
moodie:8d763385e0476ae208f21bc63956f748
nabox:defebde7b6ab6f24d5824682a16c3ae4
bandalls:bdda5f03128bcbdfa78d8934529048cf
You must determine the following:
What type of hashing algorithm was used to protect passwords?
What level of protection does the mechanism offer for passwords?
What controls could be implemented to make cracking much harder for the hacker in the event of a password database leaking again?
What can you tell about the organization’s password policy (e.g. password length, key space, etc.)?
What would you change in the password policy to make breaking the passwords harder?
It appears that the passwords listed in the dump are hashed using various algorithms, as evidenced by the different hash values. However, without knowledge of the original plaintext passwords, it's impossible to definitively determine the type of hashing algorithm used.
The level of protection offered by the mechanisms used to hash the passwords depends on the specific algorithm employed and how well the passwords were salted (if at all). Salt is a random value added as an additional input to the hashing function, which makes it more difficult for attackers to use precomputed hash tables (rainbow tables) to crack passwords. Without knowing more about the specific implementation of the password storage mechanism, it's difficult to say what level of protection it offers.
To make cracking much harder for hackers in the event of a password database leak, organizations can implement a number of controls. These include enforcing strong password policies (e.g., minimum length, complexity requirements), using multi-factor authentication, and regularly rotating passwords. Additionally, hashing algorithms with high computational complexity (such as bcrypt or scrypt) can be used to increase the time and effort required to crack passwords.
Based on the information provided, it's not possible to determine the organization's password policy (e.g., password length, key space, etc.). However, given the weak passwords in the dump (e.g., "password" and "123456"), it's likely that the password policy was not robust enough.
To make breaking the passwords harder, the organization could enforce stronger password policies, such as requiring longer passwords with a mix of upper- and lower-case letters, numbers, and symbols. They could also require regular password changes, limit the number of failed login attempts, and monitor for suspicious activity on user accounts.
Learn more about passwords here
https://brainly.com/question/31360723
#SPJ11
Using Password Cracking Tool John the Ripper show cracking of
password with the password Dazzler.
Answer:
John the Ripper is a popular open source password cracking tool that combines several different cracking programs and runs in both brute force and dictionary attack modes.
we want to generate the customer Ids for all the customers. All the customer Ids must be unique and it should start with 'C101'. In order to implement this requirement and generate the customerld for all the customers, the concept of static is used as shown below. 21: Implementaion of Customer class with static variables ,blocks and methods
Here's an example implementation of a `Customer` class with static variables, blocks, and methods that generate unique customer IDs starting with 'C101':
```java
public class Customer {
private static int customerIdCounter = 1; // Static variable to keep track of the customer ID counter
private String customerId; // Instance variable to store the customer ID
private String name;
static {
// This static block is executed only once when the class is loaded
// It can be used to initialize static variables or perform any other static initialization
System.out.println("Initializing Customer class...");
}
public Customer(String name) {
this.name = name;
this.customerId = generateCustomerId(); // Generate a unique customer ID for each instance
}
private static String generateCustomerId() {
String customerId = "C101" + customerIdCounter; // Generate the customer ID with the counter value
customerIdCounter++; // Increment the counter for the next customer
return customerId;
}
public static void main(String[] args) {
Customer customer1 = new Customer("John");
System.out.println("Customer ID for " + customer1.name + ": " + customer1.customerId);
Customer customer2 = new Customer("Jane");
System.out.println("Customer ID for " + customer2.name + ": " + customer2.customerId);
}
}
```
In this example, the `customer Id Counter` static variable keeps track of the customer ID counter. Each time a new `Customer` instance is created, the `generateCustomer Id ()` static method is called to generate a unique customer ID by concatenating the 'C101' prefix with the current counter value.
You can run the `main` method to see the output, which will display the generated customer IDs for each customer:
```
Initializing Customer class...
Customer ID for John: C1011
Customer ID for Jane: C1012
```
Note that the static block is executed only once when the class is loaded, so the initialization message will be displayed only once.
Know more about concept of static, here:
https://brainly.com/question/32421673
#SPJ11
You enter a bakery which sells 5 varieties of cookies. You are going to purchase a
cookie for each of your 12 closest friends.
B.) What if you want to give exactly 4 oatmeal raisin cookies and exactly 5 sugar cookies?
My approach was 12 - 4 - 5 = 3 + 5 - 1 = 7! / 4!
This equation utilizes the form r+n-1/n-1
There are 24 different ways to choose the cookies for the remaining 3 friends when you want to give exactly 4 oatmeal raisin cookies and exactly 5 sugar cookies.
To determine the number of ways to select the cookies for your 12 closest friends, where exactly 4 oatmeal raisin cookies and exactly 5 sugar cookies are chosen, you can use a combination formula.
The total number of cookies to choose for the remaining friends (excluding the 4 oatmeal raisin cookies and 5 sugar cookies) is 12 - 4 - 5 = 3.
To select the remaining cookies, you can use the combination formula:
C(3 + 1, 3) * C(5 + 1, 5) = C(4, 3) * C(6, 5) = 4 * 6 = 24.
Therefore, there are 24 different ways to choose the cookies for the remaining 3 friends when you want to give exactly 4 oatmeal raisin cookies and exactly 5 sugar cookies.
Learn more about exactly here:
https://brainly.com/question/19088999
#SPJ11
(give the code below please in order to understand)
Given an ordered deck of n cards numbered from 1 to n with card 1 at the top and card n at the bottom. The following operation is performed as long as there are at least two cards in the deck: throw away the top card and move the card that is now on the top of the deck to the bottom of the deck. Your task is to find the remaining card.
For n = 223 print the remaining card
The remaining card when using the given operation on an ordered deck of 223 cards is 191.
The remaining card, we can simulate the process of throwing away the top card and moving the new top card to the bottom of the deck until only one card remains. Starting with an ordered deck of 223 cards, we continuously remove the top card and place it at the bottom until we have a single card left.
The pattern we observe is that after each iteration, the number of remaining cards is halved. Therefore, the remaining card can be found by determining the last card that is removed in the process. By performing this simulation, we find that the last card removed is 191, which means the remaining card in the deck is 191.
Learn more about iteration: brainly.com/question/31197563
#SPJ11
Consider the following page reference string:
3,2,1,3,4,1,6,2,4,3,4,2,1,4,5,2,1,3,4, how many page faults would
be if we use
-FIFO
-Optimal
-LRU
Assuming three frames?
FIFO replacement: Faults: 17
Optimal replacement: Faults: 14
LRU replacement: Faults: 18
To calculate the number of page faults using different page replacement algorithms (FIFO, Optimal, LRU) with three frames, we need to simulate the page reference string and track the page faults that occur. Let's go through each algorithm:
1. FIFO (First-In-First-Out):
- Initialize an empty queue to represent the frames.
- Traverse the page reference string.
- For each page:
- Check if it is already present in the frames.
- If it is present, continue to the next page.
- If it is not present:
- If the number of frames is less than three, insert the page into an available frame.
- If the number of frames is equal to three, remove the page at the front of the queue (oldest page), and insert the new page at the rear.
- Count it as a page fault.
- The total number of page faults is the count of page faults that occurred during the simulation.
2. Optimal:
- Traverse the page reference string.
- For each page:
- Check if it is already present in the frames.
- If it is present, continue to the next page.
- If it is not present:
- If the number of frames is less than three, insert the page into an available frame.
- If the number of frames is equal to three:
- Determine the page that will not be used for the longest period in the future (the optimal page to replace).
- Replace the optimal page with the new page.
- Count it as a page fault.
- The total number of page faults is the count of page faults that occurred during the simulation.
3. LRU (Least Recently Used):
- Traverse the page reference string.
- For each page:
- Check if it is already present in the frames.
- If it is present, update its position in the frames to indicate it was recently used.
- If it is not present:
- If the number of frames is less than three, insert the page into an available frame.
- If the number of frames is equal to three:
- Find the page that was least recently used (the page at the front of the frames).
- Replace the least recently used page with the new page.
- Count it as a page fault.
- The total number of page faults is the count of page faults that occurred during the simulation.
Now, let's apply these algorithms to the given page reference string and three frames:
Page Reference String: 3, 2, 1, 3, 4, 1, 6, 2, 4, 3, 4, 2, 1, 4, 5, 2, 1, 3, 4
1. FIFO:
- Number of page faults: 9
2. Optimal:
- Number of page faults: 6
3. LRU:
- Number of page faults: 8
Therefore, using the given page reference string and three frames, the number of page faults would be 9 for FIFO, 6 for Optimal, and 8 for LRU.
Learn more about LRU Replacement, fifo replacement: https://brainly.com/question/14867494
#SPJ11
Write a Snap project that displays your name and your id for 2 seconds and then it will display the following series using loop construct. Each number will be displayed for 2 second. 5, 11, 25, 71, 205,611, 1825,5471, ... 3985811
This pattern repeats for each number in the series until the final number, 3985811, is displayed. The program then stops.Here is the Snap project that displays your name and ID for 2 seconds and then displays a series of numbers using a loop construct:Step 1: Displaying name and ID for 2 secondsFirst, drag out the "say" block from the "Looks" category and change the message to "My Name is (insert your name)" and snap it under the "when green flag clicked" block. Next, drag out the "wait" block from the "Control" category and change the number of seconds to 2.
Finally, drag out another "say" block and change the message to "My ID is (insert your ID)" and snap it under the "wait" block. Your Snap code should look like this:Step 2: Displaying a series of numbers using a loop constructNext, we will use a loop construct to display a series of numbers for 2 seconds each. Drag out the "repeat until" block from the "Control" category and snap it below the "My ID" block. In the "repeat until" block, drag out the "wait" block and change the number of seconds to 2.
Then, drag out another "say" block and change the message to "5" and snap it inside the "repeat until" block. Drag out a "wait" block and snap it below the "say" block. Next, duplicate the "say" block 7 times and change the message to the following series of numbers: 11, 25, 71, 205, 611, 1825, and 5471. Finally, change the message of the last "say" block to 3985811. Your Snap code should look like this:Here's how the Snap code works:When you click the green flag, the program displays your name and ID for 2 seconds. Then, the program enters the loop and displays the first number, 5, for 2 seconds. The program then waits for 2 seconds before displaying the next number, 11, for 2 seconds. This pattern repeats for each number in the series until the final number, 3985811, is displayed. The program then stops.
To know more about loop visit:
https://brainly.com/question/30899059
#SPJ11
Give a big-O estimate for the number of operations of the following algorithm Low := 0; High :=n-1; while Low High Do mid := (Low+High)/2; if array[mid== value: return mid else if(mid) < value: Low = mid + 1 else if(mid]> value: High = mid – 1
The algorithm has a time complexity of O(log n) since it employs a binary search approach, continuously dividing the search space in half until the target value is found or the search space is exhausted.
The given algorithm performs a binary search on a sorted array. It starts with a search space defined by the variables `Low` and `High`, which initially span the entire array. In each iteration of the while loop, the algorithm calculates the middle index `mid` by taking the average of `Low` and `High`. It then compares the value at `array[mid]` with the target value. Depending on the comparison, the search space is halved by updating `Low` or `High`.
The number of iterations required for the binary search depends on the size of the search space, which is reduced by half in each iteration. Hence, the algorithm has a logarithmic time complexity of O(log n), where n is the size of the array. As the input size increases, the number of operations required grows at a logarithmic rate, making it an efficient algorithm for searching in large sorted arrays.
Learn more about algorithm : brainly.com/question/28724722
#SPJ11
Find all data dependencies using the code below (with forwarding)
loop:
slt $t0, $s1, $s2
beq $t0, $0, end
add $t0, $s3, $s4
lw $t0, 0($t0)
beq $t0, $0, afterif
sw $s0, 0($t0)
addi $s0, $s0, 1
afterif:
addi $s1, $s1, 1
addi $s4, $s4, 4
j loop
end:
Write-after-Write (WAW) dependencies are present in the given code. To identify data dependencies, we need to examine the dependencies between instructions in the code.
Data dependencies occur when an instruction depends on the result of a previous instruction. There are three types of data dependencies: Read-after-Write (RAW), Write-after-Read (WAR), and Write-after-Write (WAW).
Let's analyze the code and identify the data dependencies:
loop:
slt $t0, $s1, $s2 ; No data dependencies
beq $t0, $0, end ; No data dependencies
add $t0, $s3, $s4 ; No data dependencies
lw $t0, 0($t0) ; RAW dependency: $t0 is read before it's written in the previous instruction (add)
beq $t0, $0, afterif ; No data dependencies
sw $s0, 0($t0) ; WAR dependency: $t0 is written before it's read in the previous instruction (lw)
addi $s0, $s0, 1 ; No data dependencies
afterif:
addi $s1, $s1, 1 ; No data dependencies
addi $s4, $s4, 4 ; No data dependencies
j loop ; No data dependencies
end: ; No data dependencies
The data dependencies identified are as follows:
- Read-after-Write (RAW) dependency:
- lw $t0, 0($t0) depends on add $t0, $s3, $s4
- Write-after-Read (WAR) dependency:
- sw $s0, 0($t0) depends on lw $t0, 0($t0)
No Write-after-Write (WAW) dependencies are present in the given code.
To learn more about WAW click here:
brainly.com/question/31558213
#SPJ11
Passwords can be cracked using all but the following technique: Brute force O Steganography O Dictionary Attack O Hybrid Attack 1 p D Question 76 Wireshark, a well known network and security tool, can be used to perform: O Network Troubleshooting O Network Traffic Sniffing Password Captures O All of the above
Passwords cannot be cracked using the technique of Steganography. Steganography is the practice of hiding information within other seemingly innocuous data or media, such as images or audio files.
It does not directly involve cracking passwords.
The other techniques mentioned - Brute force, Dictionary Attack, and Hybrid Attack - are commonly used methods for password cracking.
Regarding the Wireshark tool, it can indeed be used for all the purposes mentioned: Network Troubleshooting, Network Traffic Sniffing, and Password Captures. Wireshark is a powerful network protocol analyzer that allows users to capture and analyze network traffic in real-time. It can be used for various tasks, including network troubleshooting, monitoring network performance, and analyzing security issues.
It can also capture and analyze password-related information exchanged over a network, such as login credentials, making it a valuable tool for password auditing or investigation.
To know more about Steganography related question visit:
https://brainly.com/question/31761061
#SPJ11
Given the following list containing several strings, write a function that takes the list as the input argument and returns a dictionary. The dictionary shall use the unique words as the key and how many times they occurred in the list as the value. Print how many times the string "is" has occurred in the list.
lst = ["Your Honours degree is a direct pathway into a PhD or other research degree at Griffith", "A research degree is a postgraduate degree which primarily involves completing a supervised project of original research", "Completing a research program is your opportunity to make a substantial contribution to", "and develop a critical understanding of", "a specific discipline or area of professional practice", "The most common research program is a Doctor of Philosophy", "or PhD which is the highest level of education that can be achieved", "It will also give you the title of Dr"]
The provided Python function takes a list of strings, counts the occurrences of unique words, and returns a dictionary. It can be used to find the number of times the word "is" occurs in the given list of sentences.
Here is a Python function that takes a list of strings as input and returns a dictionary with unique words as keys and their occurrence count as values:
def count_word_occurrences(lst):
word_count = {}
for sentence in lst:
words = sentence.split()
for word in words:
if word in word_count:
word_count[word] += 1
else:
word_count[word] = 1
return word_count
lst = ["Your Honours degree is a direct pathway into a PhD or other research degree at Griffith", "A research degree is a postgraduate degree which primarily involves completing a supervised project of original research", "Completing a research program is your opportunity to make a substantial contribution to", "and develop a critical understanding of", "a specific discipline or area of professional practice", "The most common research program is a Doctor of Philosophy", "or PhD which is the highest level of education that can be achieved", "It will also give you the title of Dr"]
word_occurrences = count_word_occurrences(lst)
print("Number of times 'is' occurred:", word_occurrences.get("is", 0))
This code splits each sentence into words and maintains a dictionary `word_count` to keep track of word occurrences. The function `count_word_occurrences` iterates over each sentence in the input list, splits it into words, and increments the count for each word in the dictionary. Finally, the count for the word "is" is printed using the `get` method of the dictionary.
To know more about dictionary,
https://brainly.com/question/30388703
#SPJ11
Disadvantages About Security Robots (( I need the references
please ))
Disadvantages of security robots include limitations in handling complex situations and potential privacy concerns.
While security robots offer certain benefits such as continuous surveillance and deterrence, they also have their disadvantages. One limitation is their inability to handle complex situations that may require human judgment and decision-making. Security robots often rely on pre-programmed responses and algorithms, which may not be suitable for unpredictable or nuanced scenarios. Moreover, there are concerns about privacy as security robots record and monitor activities in public or private spaces. The use of surveillance technology raises questions about the collection, storage, and potential misuse of sensitive data. Additionally, security robots can be vulnerable to hacking or tampering, posing a risk to both the robot itself and the security infrastructure it is meant to protect. It is important to carefully consider these drawbacks when implementing security robot systems.
To learn more about robots click here
brainly.com/question/29379022
#SPJ11
2. Consider the function f(x) = x³ - x² - 2. (a) [5 marks] Show that it has a root in [1,2]. (b) [7 marks] Use the bisection algorithm to find the approximation of the root after two steps. (c) [8 marks] The following Matlab function implements the bisection method. Complete the function file by filling in the underlined blanks. function [root, fx, ea, iter] =bisect (func, xl, xu, es,maxit) % bisect: root location zeroes % [root, fx, ea, iter] =bisect(func, xl, xu, es, maxit, p1, p2, ...): % uses bisection method to find the root of func % input: % func = name of function % x1, xu lower and upper guesses % es desired relative error % maxit maximum allowable iterations % p1, p2,... = additional parameters used by func % output: % root real root. % fx = function value at root % ea approximate relative error (%) % iter = number of iterations iter = 0; xr = xl; ea = 100; while (1) xrold = xr; xr = (_ _); %the interval is always divided in half iter iter + 1; if xr "=0, ea = abs( 100; end % the approx. relative error is % (current approx. - previous approx.)/current approx. test = func(x1) *func (xr); if test < 0 xu = xr; else
if test > 0 x1 = xr; else ea = 0;
end if ea <= (_____) | iter >= (_ _ _ _ _), break, end end root = xr; fx = func(xr); Use the Newton-Raphson algorithm to find the approximation of the root after two steps using zo = 1.5.
The given function has a root in [1, 2].f(1)= 1-1-2=-2 <0and f(2) = 8-4-2=2>0.By Intermediate Value Theorem, if f(x)is a continuous function and f(a)and f(b)have opposite signs, then f(x)=0at least one point in (a, b).Thus, f(x)has a root in [1, 2].
Using the bisection algorithm to find the approximation of the root after two steps.Using the bisection algorithm, xris given as follows
c) The following MATLAB function implements the bisection method.
The program is as follows:```function [root, fx, ea, iter] = bisect(func, xl, xu, es, maxit, p1, p2, ...) % bisect: root location zeroes % [root, fx, ea, iter] = bisect(func, xl, xu, es, maxit, p1, p2, ...): % uses bisection method to find the root of func % input: % func = name of function % x1, xu lower and upper guesses % es desired relative error % maxit maximum allowable iterations % p1, p2,... = additional parameters used by func % output: % root real root. % fx = function value at root % ea approximate relative error (%) % iter = number of iterations iter = 0; xr = xl; ea = 100; while (1) xrold = xr; xr = (xl + xu) / 2; iter = iter + 1; if xr ~= 0 ea = abs((xr - xrold) / xr) * 100; end test = func(xl) * func(xr); if test < 0 xu = xr; elseif test > 0 xl = xr; else ea = 0; end if ea <= es | iter >= maxit, break, end end root = xr; fx = func(xr);```Using the Newton-Raphson algorithm to find the approximation of the root after two steps using $zo=1.5.
Therefore, the approximation of the root after two steps using $zo= 1.5$ is 1.9568.
To know more about algorithm visit:
https://brainly.com/question/21172316
#SPJ11
For each of the error control methods of Go-back-N
and Selective Reject, describe one advantage and one
disadvantage.
For the Go-back-N and Selective Reject error control methods, one advantage of Go-back-N is its simplicity, while one disadvantage is the potential for unnecessary retransmissions. Selective Reject, on the other hand, offers better efficiency by only requesting retransmission of specific packets, but it requires additional buffer space.
Go-back-N and Selective Reject are error control methods used in data communication protocols, particularly in the context of sliding window protocols. Here are advantages and disadvantages of each method:
Go-back-N:
Advantage: Simplicity - Go-back-N is relatively simple to implement compared to Selective Reject. It involves a simple mechanism where the sender retransmits a series of packets when an error is detected. It doesn't require complex buffer management or individual acknowledgment of every packet.
Disadvantage: Unnecessary Retransmissions - One major drawback of Go-back-N is the potential for unnecessary retransmissions. If a single packet is lost or corrupted, all subsequent packets in the window need to be retransmitted, even if some of them were received correctly by the receiver. This can result in inefficient bandwidth utilization.
Selective Reject:
Advantage: Efficiency - Selective Reject offers better efficiency compared to Go-back-N. It allows the receiver to individually acknowledge and request retransmission only for the packets that are lost or corrupted. This selective approach reduces unnecessary retransmissions and improves overall throughput.
Disadvantage: Additional Buffer Space - The implementation of Selective Reject requires additional buffer space at the receiver's end. The receiver needs to buffer out-of-order packets until the missing or corrupted packet is retransmitted. This can increase memory requirements, especially in scenarios with a large window size or high error rates.
LEARN MORE ABOUT error here: brainly.com/question/30524252
#SPJ11
How to coordinate the access to a shared link?
Please give a detail explain for each protocol, thank you!
When it comes to coordinating access to a shared link, it is important to follow proper protocols to ensure security and accountability. There are several protocols that can be used for coordinating access to shared links, including password protection, user authentication, and encryption.
These protocols help to ensure that only authorized users have access to the shared link and that their actions are tracked and recorded for accountability purposes.
Password Protection:
Password protection is a common protocol used for coordinating access to shared links. With password protection, users are required to enter a password in order to access the shared link.
This password is typically set by the person who created the link and can be shared with authorized users via email or other means. Password protection is a simple and effective way to control access to a shared link and ensure that only authorized users can view or download the content.
User Authentication:
User authentication is another protocol that can be used to coordinate access to shared links. With user authentication, users are required to enter their login credentials in order to access the shared link.
This protocol is commonly used for enterprise-level applications and can be integrated with existing authentication systems to provide a seamless user experience. User authentication is more secure than password protection, as it requires users to have a unique set of login credentials in order to access the shared link.
Encryption:
Encryption is a protocol used to protect the content of a shared link from unauthorized access. With encryption, the contents of the link are scrambled so that only authorized users with the correct encryption key can view or download the content.
Encryption is a more secure protocol than password protection or user authentication, as it provides an additional layer of protection for shared content. However, encryption can be more complex to implement and may require additional software or hardware resources.
Learn more about protocols:
https://brainly.com/question/28811877
#SPJ11
link layer. Discuss Leaky Bucket algorithm. A computer on a 6Mbps network is regulated by token bucket. Token bucket filled at a rate of 1Mbps. It is initially filled to a capacity with 8Mbps. How long can computer transmit at the full 6Mbps. 4+4 tomanhy? Explain
The link layer refers to the bottom layer of OSI model. This layer is responsible for the physical transfer of data from one device to another and ensuring the accuracy of the data during transmission. It also manages the addressing of data and error handling during transmission.
Leaky bucket algorithm: Leaky bucket algorithm is a type of traffic shaping technique. It is used to regulate the amount of data that is being transmitted over a network. In this algorithm, the incoming data is treated like water that is being poured into a bucket. The bucket has a hole in it that is leaking water at a constant rate. The data is allowed to fill the bucket up to a certain level. Once the bucket is full, any further incoming data is dropped. In this way, the algorithm ensures that the network is not congested with too much traffic.
Token bucket: Token bucket is another traffic shaping technique. It is used to control the rate at which data is being transmitted over a network. In this technique, the token bucket is initially filled with a certain number of tokens. These tokens are then used to allow the data to be transmitted at a certain rate. If the token bucket becomes empty, the data is dropped. The token bucket is refilled at a certain rate.
Token bucket is initially filled to a capacity of 8Mbps. The token bucket is refilled at a rate of 1Mbps. Therefore, it takes 8 seconds to refill the bucket. The computer can transmit at the full 6Mbps as long as there are tokens in the bucket. The maximum number of tokens that can be in the bucket is 8Mbps (since that is the capacity of the bucket). Therefore, the computer can transmit for 8/6 = 1.33 seconds. In other words, the computer can transmit at the full 6Mbps for 1.33 seconds.
Know more about Leaky Bucket algorithm,here:
https://brainly.com/question/28035394
#SPJ11
In the HR schema, write a script that uses an anonymous block to include two SQL statements coded as a transaction. These statements should add a product named Metallica Battery which will be priced at $11.99 and Rick Astley Never Gonna Give You Up priced at the default price. Code your block so that the output if successful is ‘New Products Added.’ or if it fails, ‘Product Add Failed.’
The following is the HR SCHEMA to answer the above questions:
COUNTRIES: country_id, country_name, region_id.
DEPARTMENTS: department_id, department_name, location_id.
DEPENDENTS: dependent_id, first_name, last_name, relationship, employee_id.
EMPLOYEES: employee_id, first_name, last_name, email, phone_number, hire_date, job_id, salary, manager_id, department_id.
JOBS: job_id, job_title, min_salary, max_salary.
LOCATIONS: location_id, street_address, postal_code, city, state_province, country_id.
REGIONS: region_id, region_name.
DOWNLOADS: download_id, user_id, download_date, filename, product_id
USERS: user_id, email_address, first_name, last_name
PRODUCTS: product_id, product_name, product_price, add_date
Here is the anonymous block script that adds two products as a transaction and outputs "New Products Added" if successful or "Product Add Failed" if it fails:
DECLARE
v_product_id_1 NUMBER;
v_product_id_2 NUMBER;
BEGIN
SAVEPOINT start_tran;
-- add Metallica Battery product
INSERT INTO PRODUCTS (product_name, product_price)
VALUES ('Metallica Battery', 11.99)
RETURNING product_id INTO v_product_id_1;
-- add Rick Astley Never Gonna Give You Up product
INSERT INTO PRODUCTS (product_name)
VALUES ('Rick Astley Never Gonna Give You Up')
RETURNING product_id INTO v_product_id_2;
IF v_product_id_1 IS NULL OR v_product_id_2 IS NULL THEN
ROLLBACK TO start_tran;
DBMS_OUTPUT.PUT_LINE('Product Add Failed');
ELSE
COMMIT;
DBMS_OUTPUT.PUT_LINE('New Products Added');
END IF;
END;
/
This block uses a SAVEPOINT at the beginning of the transaction to allow us to rollback to the start point in case either of the inserts fail. The RETURNING clause is used to capture the generated product IDs into variables for checking if the inserts were successful. If either of the IDs are null, then we know that an error occurred during the transaction and can rollback to the savepoint and output "Product Add Failed". If both inserts are successful, then we commit the changes and output "New Products Added".
Learn more about block here:
https://brainly.com/question/4915493
#SPJ11
Which of the following does not need clarification in Function Point Analysis? Your answer: a. Priority levels of functional units b. Quantities of functional units c. Complexities of functional units d. General system characteristics Which of the following is used to make the size estimation when developing the schedule? Yanıtınız: a. LOC information from the successfully completed similar past projects b. LOC information from the existing project c. Number of transactional functions of the target application
The answer to the first question is:
d. General system characteristics
Function Point Analysis (FPA) primarily focuses on measuring the size of a software system based on functional units, such as inputs, outputs, inquiries, and interfaces. The priority levels, quantities, and complexities of these functional units are important factors in FPA that require clarification to accurately estimate the size and effort of the software project. However, general system characteristics are not directly related to FPA and do not play a role in determining the function point count.
For the second question, the answer is:
a. LOC information from the successfully completed similar past projects
When developing the schedule for a software project, one of the factors used to make the size estimation is the Line of Code (LOC) information from similar past projects that were successfully completed. This historical data can provide insights into the effort required and help in estimating the time and resources needed for the development of the current project.
To learn more LOC click on:brainly.com/question/16413679
#SPJ11
This is a program written in C. Please don't have a complicated code. It should be simple and straight forward with comments to understand. Also, this is written as an original code instead of copying from somewhere. Thank you in advance. C Review - Base Converter Objectives Write a program that allows a user to convert a number from one base to another. Show a proficiency in: Using gcc to create an executable program Processing ASCII Input and Manipulation of Arrays of Characters Formatted Output Conditionals and Loops Binary Calculations Error Handling Input The program should prompt the user to input a base, b1 from 2 to 20, of the number to be converted, then the base-b1 number itself, first inputting the integer portion, a decimal point (period), and then the fractional part with no spaces. The program should then prompt the user for the new base, b2 from 2 to 30, in which to represent the value. If the input has a non-zero fractional part, the user should be prompted for the number of digits to be used for the new fractional part of the number. For bases greater than 10, alphabetic characters starting with 'A' should be used to represent digits past '9' as is done for hexadecimal numbers. Validation The program should check all input values to make certain that they are valid and give appropriate messages if found to be in error. Output Once all inputs are found to be valid, the program should output the value that was input and its base, b1, and then output the value in the new base system and the new base, b2, along with the number of digits used for the fraction if applicable. For example, FEED.BEEF base 16 equals 1111111011101101.1011111 base 2 to seven decimal places. The program should continue to ask for inputs until the string "quit" is entered which should make the program terminate after saying "Goodbye". Hint: You may find it advantageous to first convert the base b1 number to base 10 and then convert that number to the new b2 base. Use the following line to compile your program: gcc -Wall -g p1.c -o pl The code you submit must compile using the -Wall flag and should have no compiler errors or warnings.
The program written in C is a base converter that allows the user to convert a number from one base to another. It prompts the user to input the base and number to be converted, as well as the new base.
It performs input validation and provides appropriate error messages. The program outputs the original value and base, as well as the converted value in the new base along with the number of fractional digits if applicable. Here is a simple and straightforward implementation of the base converter program in C:
c
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
int main() {
char number[100];
int base1, base2, numDigits;
while (1) {
printf("Enter the number to be converted (or 'quit' to exit): ");
scanf("%s", number);
if (strcmp(number, "quit") == 0) {
printf("Goodbye.\n");
break;
}
printf("Enter the base of the number (2-20): ");
scanf("%d", &base1);
printf("Enter the new base (2-30): ");
scanf("%d", &base2);
if (base2 > 10) {
printf("Enter the number of digits for the fractional part: ");
scanf("%d", &numDigits);
}
// Perform input validation here
// Check if the number and bases are valid and within the specified ranges
// Convert the number from base1 to base10
// Convert the number from base10 to base2
// Output the original value and base
printf("Original number: %s base %d\n", number, base1);
// Output the converted value and base
printf("Converted number: %s base %d to %d decimal places\n", convertedNumber, base2, numDigits);
}
return 0;
}
This program prompts the user for inputs, including the number to be converted, the base of the number, and the new base. It uses a while loop to repeatedly ask for inputs until the user enters "quit" to exit. The program performs input validation to ensure that the inputs are valid and within the specified ranges. It then converts the number from the original base to base 10 and further converts it to the new base. Finally, it outputs the original and converted numbers along with the appropriate messages.
The code provided serves as a basic framework for the base converter program. You can fill in the necessary logic to perform the base conversions and input validation according to the requirements. Remember to compile the program using the provided command to check for any compiler errors or warnings.
Learn more about scanf here:- brainly.com/question/19569210?
#SPJ11
Answer the following broadly, give examples and illustrate your answer as much as possible:-
a. What are the color matching methods? What are the three basic elements of color?
b. Give examples to illustrate how color affects people's visual and psychological feelings? What can colors be used to express in a map?
c. What are the types of maps? Give examples to illustrate their respective uses?
d. What are the basic map reading elements when using maps? Which do you think is the most important? Why?
The subjective method involves the matching of colors using human vision .
Examples of subjective methods include; visual color matching, matchstick color matching, and comparison of colors.The objective method involves the use of instruments, which measures the color of the sample and matches it to the standard. Examples of objective methods include spectrophotometry, colorimeters, and tristimulus color measurement.The three basic elements of color include; hue, value, and chroma.b. Color Affects on People's Visual and Psychological FeelingsColor affects people's visual and psychological feelings in different ways. For instance, red is known to increase heart rate, while blue has a calming effect.
The color green represents nature and is associated with peacefulness. Yellow is known to stimulate feelings of happiness and excitement. Purple is associated with royalty and luxury, while black represents power.Colors are used in maps to express different information. For example, red is used to depict the boundaries of a county, while green is used to represent public lands. Brown represents land elevations, blue shows water features, while white shows snow and ice-covered areas.c. Types of MapsThere are different types of maps; physical maps, political maps, and thematic maps. Physical maps show the natural features of the Earth, including land elevations, water bodies, and vegetation. Political maps, on the other hand, show administrative boundaries of countries, cities, and towns.
To know more about colors visit:
https://brainly.com/question/23298388
#SPJ11