Worked Calculate the number of electrons that a positively charged object gains if its charge decreases by 3,2 x 10-18 C.​

The abbreviation for the base unit of mass in the metric system is "m" and the abbreviation for the base unit of length in the metric system is "l". The abbreviation for the base unit of mass in the metric system is kg (kilogram) and the abbreviation for the base unit of length in the metric system is m (meter).

What is the metric system? The metric system is a system of measurement used by most countries around the world. It is also known as the International System of Units (SI). It has a base unit for each quantity it measures. These base units can then be used to express quantities of that type, either as a multiple or a fraction. For example, the base unit for mass is the kilogram (kg). We can express mass in grams (g), which is a smaller unit of mass. A kilogram is equal to 1000 grams. Similarly, the base unit for length is the meter (m), and we can express lengths in centimeters (cm) or kilometers (km), which are smaller or larger units of length, respectively. In summary, the metric system has a base unit for each quantity it measures. The base unit for mass is the kilogram (kg) and the base unit for length is the meter (m).

For more details on metric system , click on the below link:

https://brainly.com/question/23183575

#SPJ11

The spring constant is 0.28 N/m if 14 oscillations take 11.0s.

In physics, oscillations are defined as a repetitive variation, typically in time, of some measure about a central value (often a point of equilibrium) or between two or more different states. The spring constant (k) is a measure of a spring's stiffness. It is the amount of force required to displace a spring a specific distance (typically one meter).

The spring constant formula is expressed as:-

F=kx

where k is the spring constant and x is the displacement produced by the force F.

We know that the air-track glider has a mass of 240 g, and it is attached to a spring. The glider is pushed 8.2 cm against the spring and then released. The oscillations are then observed, and it is found that 14 oscillations occur in 11.0 s.

We can calculate the spring constant by using this information.

Let us now calculate the spring constant k.

For a mass (m) attached to a spring, the formula for the time period T is:-

T=2π√m/k

We know that the time period T = 11/14 s. We also know that the glider has a mass of 240 g or 0.24 kg.

Now, we can solve the formula for the spring constant k as follows:-

k= 4π²m/T²k = 4π² × 0.24 kg / (11/14 s)²k = 0.28 N/m

Therefore, the spring constant is 0.28 N/m.

Learn more about oscillations: https://brainly.com/question/27237546

#SPJ11

The velocity with which the water leaves the ground is 28.0 m/s (downward).

The Old Faithful Geyser in Yellowstone National Park shoots water every hour to a height of 40.0 meters.

To find the velocity with which the water leaves the ground, we can use the following kinematic equation:

v² = u² + 2as

Here,

v = final velocity

u = initial velocity

a = acceleration due to gravity

s = distance traveled by the object

The initial velocity of the water when it leaves the ground is 0 m/s.

Also, we can assume the final velocity of the water when it reaches the maximum height to be 0 m/s.

We know that the acceleration due to gravity is -9.8 m/s² (negative due to the direction).

The distance traveled by the water is the height to which it rises, i.e., 40.0 meters.

Using the above values in the kinematic equation, we get:

v² = 0² + 2*(-9.8)*40.0v² = -784v = √(-784)

Since the answer is coming out to be negative, it indicates that the velocity is in the downward direction.

So, the velocity with which the water leaves the ground is 28.0 m/s (downward).

To know more about velocity, refer here:

https://brainly.com/question/30559316#

#SPJ11

The charge (sign and magnitude) of a particle of mass 1.45 g must be for it to remain stationary when placed in a downward-directed electric field of magnitude 700 n/c is -1.029x10⁻⁴ C.

The magnitude of the charge must be equal to the magnitude of the electric field (700 n/c).

Therefore, we can write:-mg = qE

where, m = 1.45g = 1.45 x 10⁻³ kg

E = 700 N/cm = 1.45 x 10⁻³ kg x 9.81 m/s²

= 0.01419 N (Weight of the particle)

q = -1.029 x 10⁻⁴ C

To remain stationary when placed in a downward-directed electric field of magnitude 700 n/c, the charge (sign and magnitude) of a particle of mass 1.45 g must be negative.

Learn more about the Charge of a particle here:

https://brainly.com/question/28233928

#SPJ11

The maximum elastic potential energy stored in the spring during the motion of the blocks after the collision is 164 J.

Since the two blocks stick together after the collision, they move together as a single mass. We can use conservation of energy to find the maximum elastic potential energy stored in the spring during the motion of the blocks after the collision.

Initially, the system has potential energy due to the gravitational field:

[tex]U_i = mgh[/tex]

where m is the total mass of the system, g is the acceleration due to gravity, and h is the initial height of the second block above the first.

When the blocks hit the spring, they compress it and store elastic potential energy. At the point of maximum compression, all of the initial potential energy has been converted to elastic potential energy:

[tex]U_e = (1/2)kx^2[/tex]

where k is the spring constant and x is the maximum compression of the spring.

By conservation of energy, the initial potential energy must be equal to the maximum elastic potential energy:

[tex]U_i = U_emgh = (1/2)kx^2[/tex]

Solving for x, we get:

[tex]x = sqrt(2mgh/k)[/tex]

The spring reaches its maximum compression when the blocks momentarily come to rest. At this point, all of the initial potential energy has been converted to elastic potential energy, so the maximum elastic potential energy is:

[tex]U_e = (1/2)kx^2 = (1/2)k(2mgh/k) = mgh[/tex]

Substituting the given values, we get:

[tex]U_e = (2.00 kg + 2.00 kg)(9.81 m/s^2)(4.20 m) = 164 J[/tex]

Therefore, the maximum elastic potential energy stored in the spring during the motion of the blocks after the collision is 164 J.

To know more about "- potential energy   here

https://brainly.com/question/16705765

#SPJ4

The statement that is true for an object traveling to the right along the axis at a speed of with acceleration is "the object will slow down, eventually coming to a complete stop. So, Option A is correct.

Kinetic Friction is the resistive force that opposes the movement or motion of two interacting surfaces in relative motion. It is due to the interactions between surfaces when there is some movement between the two. The frictional force opposes the motion of the object and tends to bring it to a halt or slow it down.

Let us now consider the given options:

(a) The object will slow down, eventually coming to a complete stop. This statement is true. The object will slow down and come to a complete stop.

(b) The object cannot have a negative acceleration and be moving to the right. Thus, this statement is not true. The object can have a negative acceleration and still be moving to the right.

(c) The object will continue to move to the right, slowing down but never coming to a complete stop. Thus, this statement is not true. The object will come to a complete stop.

(d) The object will slow down, moment. Thus, this statement is not complete. It does not explain what will happen after slowing down.

Therefore, option (a) is the correct option.

To know more about Kinetic Friction, refer here:

https://brainly.com/question/30886698#

#SPJ11

The equilibrium constant, k, relates the quantity of products to reactants at a point when the reaction is at equilibrium.

Equilibrium is a state in which the rate of the forward reaction is equal to the rate of the reverse reaction, resulting in the concentration of the reactants and products remaining unchanged. A reaction is said to be in equilibrium when it has reached a state of dynamic balance.

The equilibrium constant (Kc) is a measure of the extent to which a reaction proceeds to form products. The equilibrium constant is a ratio of the concentration of the products to the concentration of the reactants at equilibrium. The value of Kc varies with temperature and depends on the stoichiometry of the balanced chemical equation.

The larger the value of Kc, the greater the concentration of products relative to reactants at equilibrium. Similarly, a smaller value of Kc indicates a greater concentration of reactants at equilibrium. The equilibrium constant is useful in predicting the direction in which a chemical reaction will proceed.

If the value of Kc is greater than one, the equilibrium favors the products, and if the value of Kc is less than one, the equilibrium favors the reactants. If the value of Kc is equal to one, the reaction is said to be at equilibrium, and the concentration of the reactants and products is equal.

To know more about equilibrium refer here:

https://brainly.com/question/30694482#

#SPJ11

The velocity of the larger fish after the meal is zero.

We can use the law of conservation of momentum, which states that the total momentum of a closed system remains constant. Before the light fish is swallowed, the total momentum is,

p1 = m1v1 + m2v2

where m1 = 4 kg, v1 = 1.5 m/s (velocity of the heavy fish), m2 = 1.2 kg, and v2 = -3.0 m/s (negative because the light fish is swimming toward the heavy fish).

p1 = (4 kg)(1.5 m/s) + (1.2 kg)(-3.0 m/s)

p1 = 0 kg m/s

After the light fish is swallowed, the two fish become one system. Let the velocity of the larger fish after the meal be v.

The total momentum of the system after the meal is,

p2 = (m1 + m2)v

By the law of conservation of momentum, p1 = p2,

0 kg m/s = (4 kg + 1.2 kg) v

Solving for v,

v = 0 m/s

To know more about speed, here

brainly.com/question/31080132

#SPJ4

The term for an orbit that electrons occupy at a fixed distance from the nucleus is called an energy level.

Electrons occupy specific energy levels in an atom, which are determined by the amount of energy required to move an electron from its present energy level to the next higher energy level. The energy levels are designated by a number, which ranges from one to seven. The lowest energy level is one, and the highest energy level is seven.

Electrons in the first energy level are the closest to the nucleus, while electrons in the seventh energy level are the farthest away.

Learn more about energy levels here: https://brainly.com/question/14287666.

#SPJ11

The average force on the person if they are stopped by an airbag that compresses an average of 15.0 cm is approximately 70,000 N.

To calculate the average force on a person,

Average force = (change in momentum) / (time interval)

Assuming that the person's initial velocity is constant, we can simplify the formula to,

Average force = (mass of the person) x (change in velocity) / (time interval)

Now, let's consider the two scenarios,

Stopped by a padded dashboard that compresses an average of 1.00 cm:

Assuming the person's initial velocity is known and constant, we need to know the time interval it takes for the person to stop after hitting the dashboard. Without this information, we cannot calculate the average force.

Stopped by an airbag that compresses an average of 15.0 cm:

The time interval for an airbag to deploy and cushion the person's impact is typically very short (about 0.03 seconds), so we can assume that the time interval is negligible in this case. Therefore, we can use the simplified formula above.

Let's assume the mass of the person is 70 kg and their initial velocity is 30 m/s. The change in velocity is the final velocity (0 m/s) minus the initial velocity (30 m/s), which is -30 m/s. The negative sign indicates that the person's velocity is decreasing.

Using the formula,

Average force = (mass of the person) x (change in velocity) / (time interval)

= (70 kg) x (-30 m/s) / (0.03 s)

= -70,000 N

To know more about average force, here

brainly.com/question/29754124

#SPJ4

When 115 V is applied across a wire that is 10 m long and has a 0.30 mm radius, the magnitude of the current density is 1.4 x [tex]10^{-8}[/tex] A/m2, therefore the resistivity of the wire is 8.214 x  [tex]10^{-8}[/tex] Ω m

The resistivity of the wire can be calculated using the formula ρ = E/J, where ρ is the resistivity, E is the electric field, and J is the current density. The electric field E can be calculated using the formula E = V/L, where V is the voltage applied and L is the length of the wire. Thus, E = 115 V/10 m = 11.5 V/mThe current density J is given as1.4 x  [tex]10^{-8}[/tex]  A/m2. Using the formula,ρ = E/J= 11.5 V/m/1.4 x 108 A/m2= 8.214 x  [tex]10^{-8}[/tex]  Ω m.

Therefore, the resistivity of the wire is 8.214 x  [tex]10^{-8}[/tex] Ω m. The resistivity of a material is a measure of its ability to oppose the flow of electric current. It is defined as the resistance per unit length and cross-sectional area of a wire. The resistivity of a material depends on various factors, including its chemical composition, temperature, and impurities. It is an important property of materials used in electrical and electronic applications.

Learn more about the resistivity at https://brainly.com/question/17010736

#SPJ11

The amount of heat lost through a 3' x 5' single-pane window with a storm that is exposed to a temperature differential is 108 BTU per hour.

The U-factor is a measure of how well a window insulates against heat transfer. The lower the U-factor, the better the window insulates.

Using these factors, we can calculate the rate of heat loss through the window in units of BTUs per hour.

Assuming a U-factor of 1.2 and a temperature difference of 60°F, the calculation would be:

Heat Loss = 1.2 BTU/(hrft^2F) x 15 ft^2 x 60°F

Heat Loss = 108 BTU/hour

Therefore, the heat lost through the window is 108 BTU per hour.

To know more about heat loss click here:

https://brainly.com/question/14228650

#SPJ11

Complete Question:

How much heat is lost through a 3' × 5' single-pane window with a storm that is exposed to a 60 Fahrenheit temperature differential?

It will take 0.7 seconds to accelerate the car from 5.00 m/s to 11.6 m/s, neglecting all frictional losses.

The power rating of an electric motor is measured in watts (W). A motor with a power rating of 145 W has the capacity to deliver 145 joules of energy per second.

The energy required to accelerate a 2.00 kg car from 5.00 m/s to 11.6 m/s can be calculated using the equation E = 0.5mv^2.

Here, m is the mass of the car (2.00 kg), and v is the difference in speed (11.6 m/s - 5.00 m/s).

This gives us E = 0.5 x 2.00 x (11.6 - 5.00)^2 = 74.48 J.

Since the motor can deliver 145 J of energy per second, it will take 0.5145/74.48 = 0.7 seconds to accelerate the car from 5.00 m/s to 11.6 m/s, neglecting all frictional losses.

For more such questions on Power Rating.

https://brainly.com/question/30265811#

#SPJ11

EM energy is like a wave as well as a particle. The concept of wave-particle duality is accounted for in the Quantum Mechanical model.

How is EM energy like a wave?

EM energy is like a wave in a way that it travels from one place to another. This travel is similar to the waves found in a water body that travel from one place to another.

In other words, it travels as a disturbance in a medium or even vacuum that doesn’t need a medium.

In addition, EM waves have features of waves like diffraction, reflection, and interference.

How is EM energy like a particle?

EM energy is also like a particle as it can also act like a particle. An example of this is the photon. Photons are energy particles that have wave-particle duality.

These particles can have particle-like behavior such as being emitted from a source, hitting a target, and interacting with the environment like other particles.

Thus, they act like a wave as well as a particle.

What model accounts for both of these characteristics? The Quantum Mechanical model accounts for both these characteristics, the wave-like and particle-like behavior of EM energy.

It explains that the energy of EM waves is quantized and its energy comes in packets known as photons. These photons can act as particles as well as waves in different situations.

The wave-particle duality is thus accounted for in the Quantum Mechanical model.

To know more about Quantum Mechanical model, refer here:

https://brainly.com/question/11852353#

#SPJ4

The magnetic field strength created by the wire coil is equivalent to the ambient magnetic field when it is deflected at a right angle.

The magnetic field strength created by the wire coil is equivalent to the ambient magnetic field when it is deflected at a right angle. The Biot-Savart Law, which relates magnetic field strength to the current in a wire and the distance from the wire, applies to a wire coil.

The strength of the magnetic field generated by a current-carrying wire is proportional to the current in the wire and the number of turns per unit length. The magnetic field's intensity is determined by the number of turns in the wire coil, the current in the wire coil, the radius of the coil, and the permeability of free space.

The equation for calculating the magnetic field strength at a point in space around a current-carrying wire is given by the Biot-Savart Law:

  B = µ₀I/2πr.

Where µ₀ is the permeability of free space, I is the current, and r is the distance from the wire to the point where the magnetic field strength is to be calculated.

Learn more about Biot-Savart Law at https://brainly.com/question/29564274

#SPJ11

When a tired worker pushes a heavy (100-kg) crate that is resting on a thick pile carpet, the frictional force exerted by the surface on the crate is 588 N.

When a tired worker pushes a heavy (100-kg) crate that is resting on a thick pile carpet, the frictional force exerted by the surface can be calculated as follows:

The weight of the crate = m × g = 100 kg × 9.8 m/s² = 980 N

Force applied by the worker = F = 600 N

The force of friction acting on the crate is given by the following formula:

Ff = μF

Where, μ is the coefficient of friction, F is the normal force acting on the crate.

Notes: The normal force is equal and opposite to the weight of the crate. i.e., N = 980 N1. The frictional force exerted by the surface on the crate is the static frictional force initially. Hence, we use the coefficient of static friction for our calculation.

2. If the force applied by the worker is not enough to overcome the static frictional force, then the crate will not move and the frictional force will remain static friction.

3. Once the crate starts moving, the static friction will convert to kinetic friction. Hence, we will use the coefficient of kinetic friction if the force applied by the worker is greater than the force of static friction. Initially, the force applied by the worker is less than the force of static friction, hence the frictional force exerted on the crate will be the static frictional force.

Frictional force = Ff = μN

The normal force acting on the crate = Weight of the crate = 980 N

Frictional force =

Ff = μN

= 0.6 × 980 N

= 588 N

Therefore, the frictional force exerted by the surface on the crate is 588 N.

For more such questions on frictional force , Visit:

https://brainly.com/question/4618599

#SPJ11

The pole vaulters downward vertical velocity at the end of this second is. 9.81 m/s. The correct option is b.

When an object falls freely under gravity, its velocity increases at a constant rate of 9.81 m/s^2. This acceleration due to gravity is denoted by 'g' and has a magnitude of 9.81 m/s^2 on the surface of the Earth.

In the given problem, the pole-vaulter is falling freely under gravity after clearing the crossbar. The time taken for him to fall is 1.0 s. Therefore, his final downward velocity can be calculated using the formula:

v = g * t

where v is the final velocity, g is the acceleration due to gravity, and t is the time taken for the fall.

Substituting the values, we get:

v = 9.81 m/s^2 * 1.0 s = 9.81 m/s

Therefore, the downward vertical velocity of the pole-vaulter at the end of the second is 9.81 m/s, which is the answer (option b).

To know more about vertical velocity, refer here:

https://brainly.com/question/30559316#

#SPJ11

The speed of the shark after it swallows the fish is calculated using the conservation of momentum principle. The total momentum before the collision is 5 kg * 1 m/s + 1 kg * 4 m/s = 9 kg * m/s. The total momentum after the collision is 5 kg * v, where v is the speed of the shark after the collision. Therefore, v = 9/5 m/s = 1.8 m/s. Thus, the speed of the shark after it swallows the fish is 1.8 m/s.

The speed of the shark after it has swallowed the 1-kg fish swimming toward it at 4 m/s is 3 m/s. This can be determined by conservation of momentum. Momentum is a vector quantity, meaning that the direction of the momentum must also be taken into account.

In this situation, the momentum of the shark before it swallows the fish is 5 kg⋅m/s due to its velocity of 1 m/s. After the shark has eaten the fish, the momentum is 6 kg⋅m/s due to the addition of the fish's momentum of 4 kg⋅m/s. Since momentum is conserved, the momentum of the shark after eating the fish is the same as the momentum of the shark before eating the fish. Since the mass of the shark does not change, the velocity must change to balance out the difference in momentum. This means that the velocity of the shark after eating the fish is 3 m/s.

For more equations related to momentum.

https://brainly.com/question/30677308

#SPJ11

A wave crest arrives on the shore a median of every 10. zero seconds, so the frequency is 0. one hundred Hz. The average speed of the waves is 1.five m/s.

We are to decide the common pace of the waves.

Using the formula

v = fλ

Where

v is the speed

f is the frequency

and λ is the wavelength

From the given information

f = 0.1 Hz

λ = 15.0 m

∴ Speed of the wave = 0.1 × 15.0

Speed of the wave = 1.5 m/s

Average speed is defined as the total distance traveled by an object divided by the time taken to cover that distance. It is the measure of the average rate at which an object covers a certain distance in a given amount of time. Mathematically, the average speed is expressed as: Average speed = Total distance traveled / Time taken

It is important to note that average speed is not the same as instantaneous speed, which refers to the speed of an object at a particular instant in time. Average speed takes into consideration the entire adventure, while instant velocity only reflects the velocity at a unmarried moment. The unit of measurement for average speed is meters per second (m/s) or kilometers per hour (km/h), depending on the system of measurement used.

To know more about Average speed visit here:

brainly.com/question/12322912

#SPJ4

The magnitude of the torque on the current loop is calculated using the formula τ=BIA sinθ, where B is the magnitude of the magnetic field, I is the current, A is the area of the loop, and θ is the angle between the magnetic field and the loop's plane. In this case, the magnitude of the torque is τ = (1.2 T)(0.5 A)(5 cm x 5 cm)sin(30°) = 7.5 x 10-3 Nm.

The torque is the rotational force that causes the loop to rotate. This is due to the fact that a force is exerted on the loop by the magnetic field when there is a current running through it. This force generates a torque on the loop, which will cause it to rotate until the angle between the plane of the loop and the magnetic field is 0°.

Know more about torque here

https://brainly.com/question/25708791#

#SPJ11

The amount of work done by a person lifting a 6.7-kg object from the bottom of a well at a constant speed of 2.5 m/s for 9 s is 1517.25 Joules.

The work done is determined using the equation below;

W = FdW = mgd

Where,W = Work done by the person,m = mass of object = 6.7 kg,g = acceleration due to gravity = 9.8 md = distance lifted by the person = ?We know that F = m(g + a) where a is the acceleration of the object that was lifted. The object is lifted at a constant velocity and so the acceleration of the object is zero. Hence,

F = mgF = 6.7 × 9.8F = 65.66 N

We can now determine the distance d that was lifted using the equation below;

d = vt

Where,v = constant velocity = 2.5 m/s.t = time taken = 9 s

Substituting the values; d = 2.5 × 9d = 22.5 m

Now we can determine the work done;

W = FdW = 65.66 × 22.5W = 1472.85 Joules (3 decimal places)

The work done by the person lifting a 6.7-kg object from the bottom of a well at a constant speed of 2.5 m/s for 9 s is 1517.25 Joules (2 decimal places)Answer: 1517.25 Joules.

More on work: https://brainly.com/question/29568084

#SPJ11

Miguel's self-esteem, which is derived from his ability to make wise and ethical decisions, would be classified as moral self-esteem.

What is Self esteem?

Self-esteem refers to an individual's overall subjective evaluation of their own worth, value, and capabilities. It is the degree to which a person sees themselves as competent, worthy, and able to cope with life's challenges. Self-esteem can be influenced by a variety of factors, including genetics, upbringing, personal experiences, and social and cultural influences. People with high self-esteem tend to be more confident, resilient, and motivated, while those with low self-esteem may struggle with feelings of inadequacy, self-doubt, and insecurity.

The type of self-esteem described in the scenario is moral self-esteem. This is because Miguel feels confident in himself based on his ability to make wise and ethical decisions, which reflects his moral values and principles. Moral self-esteem is based on one's sense of right and wrong and the extent to which one adheres to their moral standards and values. It is an important aspect of overall self-esteem as it reflects an individual's integrity, character, and ethical conduct.

Learn more about Self esteem from given link

https://brainly.com/question/1447337

#SPJ1

Explanation:

Tony's claim that solids do not have a lot of thermal expansion is partially true, but it is not entirely accurate. All materials, including solids, do undergo some degree of thermal expansion or contraction when their temperature changes. However, the amount of expansion or contraction varies depending on the material's coefficient of thermal expansion (CTE), which measures the material's response to temperature changes.

Some materials, like metals, have a high CTE and undergo significant expansion or contraction when their temperature changes. On the other hand, materials like ceramics and glasses have a low CTE and undergo relatively little expansion or contraction. Wood, which is the material used to make the door in Valdez's house, has a moderate CTE, meaning it undergoes some degree of expansion or contraction with changes in temperature.

Therefore, Valdez's argument is valid. The wooden door in his house experiences thermal expansion in the summer due to the higher temperatures. As the temperature increases, the particles in the wood gain kinetic energy, move faster, and create more space between each other, which results in the door expanding. Conversely, in the winter, the lower temperatures cause the particles in the wood to lose energy, move slower, and become closer to each other, which results in the door contracting.

In conclusion, while Tony's statement is correct in that solids do not have a lot of thermal expansion compared to liquids or gases, all solids, including wood, do experience some degree of thermal expansion or contraction due to changes in temperature.

A 45.0-cm3 piece of submerged iron will experience a greater buoyant force than a 45.0-cm3 piece of wood floating with part of its volume above water.

The buoyant force refers to the upward force that an object in a fluid experiences due to the pressure difference between the top and bottom of the object. Archimedes' principle states that the buoyant force on an object is equivalent to the weight of the fluid displaced by the object. The buoyant force is proportional to the volume of the object submerged in the fluid.

A submerged object displaces its weight of fluid, whereas a floating object displaces its own weight of fluid. Since iron has a higher density than water, a 45.0-cm3 piece of submerged iron will displace more water and experience a greater buoyant force than a 45.0-cm3 piece of wood floating with part of its volume above water.

for such more question on buoyant force

https://brainly.com/question/15706301

#SPJ11

The question that would best help the student identify each wave as either electromagnetic or mechanical is "What type of energy is transferred by each wave?".

Thus, the correct answer is "What type of energy is transferred by each wave?" (D).

Electromagnetic waves are those that do not require a medium to propagate, while mechanical waves are those that require a medium. This means that if the wave is a mechanical wave, it needs a medium to propagate. Therefore, the student can easily distinguish the electromagnetic wave from the mechanical wave by asking what type of energy is transferred by each wave.

Your question is incomplete, but most probably your options were

A. Which wave has more energy?

B. Which wave can travel through air?

C. What direction does each of the waves travel?

D. What type of energy is transferred by each wave?

Thus, the correct option is D.

For more information about electromagnetic and mechanical waves refers to the link: https://brainly.com/question/3101711

#SPJ11

The force that made Rick Lieberman's plane to make an emergency landing is b. severe turbulence.

Severe turbulence is sudden and violent turbulence that causes changes in altitude and altitude variations from the horizon. Turbulence is a natural phenomenon that can occur at any time, even when the skies are clear and blue.It can cause damage to the airplane and injure passengers, and it is a source of constant concern for pilots.

Severe turbulence is particularly dangerous because it can cause the plane to drop or gain altitude quickly, which can cause passengers to lose consciousness or be thrown from their seats. It is for this reason that planes are designed to withstand significant turbulence, and pilots receive extensive training on how to navigate through it. The correct option among the following given options is severe turbulence.

Learn more about turbulence at:

https://brainly.com/question/28102157

#SPJ11

The amount of energy that leaves the Earth's atmosphere system is 100 units of energy.

According to the conservation of energy principle, energy can neither be created nor destroyed, it can only be transformed from one form to another. Therefore, the energy that enters the Earth's atmosphere system is absorbed, reflected, and emitted as heat.

In simpler terms, some of the energy is reflected back into space, some of it is absorbed by the Earth's surface and is emitted back as heat, and some of it is trapped by greenhouse gases in the atmosphere. Ultimately, the amount of energy that leaves the system is approximately equal to the amount of energy that enters the system.

Thus, the amount of energy that leaves the Earth's atmosphere system is 100 units of energy.

To know more about greenhouse gases click here:

https://brainly.com/question/14131369

#SPJ11

The point between Earth and the moon where a space probe will experience no net force would be 384,400 km from Earth.

The point between Earth and the moon where a 50,000 kg space probe experience no net force is called the Lagrangian point. The fifth Lagrangian point (L5) is located about 60 degrees behind the moon, about 384,400 km from Earth. Therefore, the distance between the probe and the Earth is 384,400 km, which is the average distance between the Moon and Earth.

The Lagrangian point is a point in space where the gravitational forces of two major celestial bodies (such as Earth and the moon) or more celestial bodies balance the gravitational forces, allowing a third smaller body to remain in constant position relative to the larger bodies.

L5, the fifth Lagrangian point, is a Lagrangian point in the Earth-Moon system, located about 60 degrees behind the Moon. It is approximately 384,400 km away from Earth, the same as the average distance between Earth and the Moon. It is one of the stable equilibrium points of the Earth-Moon system, as the gravitational forces of the Earth and the Moon balance the centrifugal force acting on a spacecraft at this point.

Learn more about Lagrangian point:

https://brainly.com/question/29084799

#SPJ11

Milliamperage (mA) influences the quantity of the X-ray beam by controlling the amount of current passing through the X-ray tube. For dental imaging, the range of milliamperage required typically falls between 7 mA and 15 mA.

Milliamperage refers to the current or quantity of electrons moving through the x-ray tube to produce radiation. The milliamperage is responsible for controlling the amount of x-rays produced in a given time period. Radiation intensity is directly proportional to the milliamperage.

A higher milliamperage results in a greater number of electrons passing through the x-ray tube, which creates more x-rays. The milliamperage controls the quantity of radiation produced by the x-ray beam. Dental x-ray machines are designed with a pre-set milliamperage range that is appropriate for dental imaging.

Know more about  Dental x-ray machines   here:

https://brainly.com/question/29789903

#SPJ11

Given that a 3.52 volt potential difference is applied to a 1,829.90 ohm resistor, the current that passes through the resistor can be calculated by using Ohm's law. According to Ohm's law, current is equal to the potential difference divided by the resistance, so the current that passes through the resistor is 3.52 volts / 1,829.90 ohms = 0.0019265 amps.

Next, the number of electrons that pass through the resistor in 3.85 seconds can be calculated. The number of electrons is equal to the current multiplied by the time. So, 0.0019265 amps x 3.85 seconds = 7.43 x 10^-5 coulombs. Since one coulomb is equal to 6.24 x 10^18 electrons, the number of electrons that pass through the resistor in 3.85 seconds is 7.43 x 10^-5 x 6.24 x 10^18 = 4.6 x 10^13 electrons.

Know more about Ohm's law here

https://brainly.com/question/1247379#

#SPJ11