why were the practioners of alternative software development methods not satisfied with the traditional waterfall method

Answer:here is the answer

Explanation: The hexadecimal value e0-70-ea-4e-ab-a5 represents a MAC (Media Access Control) address. The MAC address is a unique identifier assigned to network interfaces for communications on the physical network segment. It can be used to track and identify devices on a network, and it consists of 6 pairs of hexadecimal digits, separated by hyphens or colons.

Yes, a three-pin power connector from the CPU fan can still connect to the four-pin header, although functionality is lost.

Specifically, the fourth pin from the four-pin header carries a sense line which enables the system to determine the speed of the fan and control it accordingly. Without the fourth pin, the fan will run at a constant speed and will not be regulated by the system.

The four-pin header has three main pins, namely, the +12V, GND, and PWM. The +12V pin carries the power to the fan while the GND pin provides the ground connection. The PWM pin is used to control the speed of the fan. The fourth pin carries a sense line which allows the system to monitor the speed of the fan. Without this fourth pin, the fan will spin at a constant speed regardless of the heat generated by the CPU.

To connect a three-pin power connector to the four-pin header, the sense line (fourth pin) must be bridged with the ground connection (GND). This means the fan will run at full speed, without the system being able to regulate the speed of the fan according to the amount of heat generated by the CPU. This can have a negative impact on the cooling system's efficiency and performance.

In conclusion, a three-pin power connector from the CPU fan can still connect to the four-pin header, but functionality is lost as the sense line (fourth pin) cannot be used to regulate the speed of the fan. Without the sense line, the fan will spin at full speed regardless of the amount of heat generated by the CPU.

You can learn more about CPU fan at: brainly.com/question/30747737

#SPJ11

The nonfunctional security requirement that provides a way to capture information correctly and a way to store information to help support later audit is data integrity.

Data integrity ensures that data has not been altered, lost, or corrupted during transmission or storage. This helps to protect the accuracy and reliability of the data, which is essential for supporting audit processes. This requirement supports nonrepudiation by enabling the logging of key system activities to ensure that subsequent disputes can be resolved adequately, if required. The objective of auditability is to ensure that a system can log and maintain adequate records of its activities so that it can satisfy legal and regulatory compliance requirements.

Learn more about data integrity: https://brainly.com/question/14898034

#SPJ11

The (III) code segments can replace /* missing code */ so the getCategory method works as intended. Therefore, the correct answer is :

(B.) III only.

The correct code segment that can replace /* missing code */ so the getCategory method works as intended is III, which includes:

if (density > 3000) {

   return "urban";

}

if (density > 999) {

   return "suburban";

}

return "rural";

III only can replace /* missing code */ so the getCategory method works as intended. This is because III is the only method that only returns a string value. It first checks if the density is greater than 3000 people per square mile, if that's the case, it returns "urban". If not, it goes ahead and checks if the density is greater than 999 people per square mile. If yes, it returns "suburban". If it fails both checks, it returns "rural".

To learn more about method visit : https://brainly.com/question/29795589

#SPJ11

When you test all the length of all input fields, you would be taking one of the steps to stop SQL injection attacks.

SQL injection attack: This is an attack where the attacker can manipulate web page inputs, usually from input fields, and extract data from the site's database. Hackers usually use SQL injection attacks to steal data such as passwords, usernames, or even credit card information. In this type of attack, SQL commands are injected into the input fields by hackers in the hopes of obtaining sensitive information. This is due to the fact that the input fields are used by the attacker to gain unauthorized access to the database server. This is where the attacker can collect the information and use it for their own personal gain. Testing the length of all input fields.

Testing the length of all input fields in a form helps prevent SQL injection attacks. This involves establishing a maximum length for each input field. This means that if the input length exceeds the specified length, the system will reject the request. This will help to avoid any attempts to manipulate the SQL statement because the input length has been defined in the input field. This can assist in preventing SQL injection attacks.

Learn more about SQL injection attack here:

https://brainly.com/question/15685996

#SPJ11

The given statement "The degree of a relation is a characteristic of the intension of the relation" is true. A relation's degree is an indication of how many elements of the domain are related to a specific element of the range.

The number of components that make up a tuple in the relation determines the degree of the relation. In other words, it refers to the number of attributes of a relation's tuples.

The degree of a relation is the number of columns in a relation or the number of attributes in a tuple. It refers to the number of attributes in each tuple. The relation's degree, on the other hand, is determined by the number of attributes that make up each tuple.

Learn more about relation: https://brainly.com/question/25862883

#SPJ11

Answer:

A

Explanation:

The first statement "the electronic and mechanical parts of a computer device" best describes what hardware is.

Hardware refers to the physical components of a computer system, such as the motherboard, CPU, RAM, hard drive, and peripherals like the keyboard and mouse. These components are made up of electronic and mechanical parts that work together to receive, process, store, and output data.

leave a comment

To generate a dynamic title ID with alphanumeric values in a flow when a form is submitted with list updates, you can use Power Automate. Here's how to do it:

Step 1: Start by logging into the Power Automate portal and creating a new flow.

Step 2: From the trigger drop-down, select the trigger that corresponds to the event that you want to capture. In this case, it will be "When an item is created or modified."

Step 3: Next, we need to set up our flow to use the form data to create a unique ID for each new form submission. This will require the use of variables to capture and store information from the form fields. We'll create two variables: one for the title ID and one for the form data. Here's how to create them:

Step 4: Now we need to create an action to update the list item with the generated title ID and form data. Here's how to do it:

Step 5: Save and test your flow to ensure that it is working correctly. You should now be able to generate a unique title ID with alphanumeric values whenever a new form submission is made.

To learn more about "power automate", visit: https://brainly.com/question/31107034

#SPJ11

To modify a model-driven app and replace the form that displays when a record is opened, two steps must be performed.

First, navigate to the app designer in Power Apps and select the app that needs to be modified. Then, select the "Components" tab and locate the entity that needs to be modified.

Next, select the "Forms" option and locate the form that needs to be replaced. Once the form has been located, select it and choose "Replace". This will allow you to select a new form to replace the old one.

After completing these two steps, the new form will be displayed when a record is opened in the model-driven app.

Learn more about Forms:

https://brainly.com/question/19169731

#SPJ11

To gain access to private member variables of objects in a class by implementing an operator which is not a member function, we need to declare that operator as a friend of that class.

A friend function is a function that has access to the private and protected member variables of a class. It is because it is declared as a friend of the class. Friend functions do not belong to the class in which they are defined, but they are not part of the class members.

Friend functions are declared inside the body of a class, but they are not members of the class. As a result, they do not have this pointer to the object being called on, and they do not belong to the class for which they have been defined.

A friend function can be any function that is not a member of the class for which it has been declared as a friend. It may be an ordinary function, a member function of another class, or even a member of a derived class.

In the above code, the function XYZ() is declared as a friend function of class ABC. As a result, it has access to the private and protected members of ABC.

For such more question on operator:

https://brainly.com/question/30841432

#SPJ11

The general term that describes Alice's actions is "data sanitization" or Anti-forensics

Data sanitization refers to the process of intentionally and permanently removing or destroying data on a storage device to prevent it from being accessed or recovered. This can be done for various reasons, such as protecting sensitive information, ensuring compliance with data protection laws, or preparing a device for reuse or disposal.

Anti-forensics is the practice of attempting to thwart or prevent digital forensic investigations, with the aim of concealing or destroying evidence that might be used against the perpetrator. It involves various techniques and methods that can make it more difficult or impossible to recover data or trace the activities of an attacker.

Therefore, Alice's repeated overwriting of a cluster of data with patterns of 1s and 0s is a common method of data wiping, called "zeroing" or "zero filling."

Read more about  computer hacker here:

https://brainly.com/question/14366812

#SPJ1

a conditional that assigns true to freezing if temperature is less than or equal to 0 degrees is:

if (temperature <= 0)

{

freezing = true;

}

else

{

freezing = false;

}

To write a conditional that assigns true to freezing if temperature is less than or equal to 0 degrees, you can use the if-else statement in JavaScript programming language. The if-else statement is a conditional statement used to execute a block of code when a certain condition is true and execute another block of code when the condition is false.

In the above conditional statement, the condition (temperature <= 0) is checked first. If the condition is true, freezing is assigned a value of true, else it is assigned a value of false. The value of temperature is compared with the value of 0 using the less than or equal to operator (<=).If the value of temperature is less than or equal to 0 degrees, then the condition (temperature <= 0) is true, and the variable freezing is assigned a value of true. Otherwise, the condition is false, and the variable freezing is assigned a value of false.

For such more questions on conditional statement:

brainly.com/question/22196219

#SPJ11

The best research approach for the scenario in which you need to compose an e-mail informing coworkers of an upcoming bowling party is A) Informal.

This scenario has a very limited scope, and there is no need for an extensive study or data collection. Instead, it would be better to have a casual conversation with coworkers and gather information about their preferences. The following are some of the characteristics of informal research approach:

Thus, an informal research approach is appropriate for the scenario. Look at past flyers for this event, ask coworkers what kind of food they would like to have at the party, and ask which bowling alley they prefer.

Learn more about research approach here:

brainly.com/question/20388845

#SPJ11

The principle that programs tend to reference items stored near to items accessed in the immediate past is known as temporal locality.

Temporal locality is a term that refers to the idea that data that has recently been accessed is more likely to be accessed again in the near future. When a program accesses an address in memory, it is likely to access neighboring addresses shortly afterward.

As a result, if two different pieces of data are accessed in quick succession, they are likely to be located in close proximity in memory. Spatial locality is a concept in computer science that refers to the principle that items in a dataset that are accessed together are stored together.

The closer together items are stored, the better they will be served by spatial locality because they will take up less memory space and be quicker to access. Temporal and spatial locality are similar in that they both involve optimizing memory access to minimize the amount of time it takes for a computer to find the data it requires.

For such more question on temporal:

https://brainly.com/question/14454005

#SPJ11

To implement a new constructor for the IntVector class that constructs the vector from an array with the given range, follow these steps:

1. Define the constructor in the IntVector class with the required parameters: an integer array, the beginning of the range, and the end of the range.

```cpp
class IntVector {
public:
   // Other constructors and methods here

   IntVector(int arr[], int begin, int end);
};
```

2. Implement the constructor in the IntVector class:

```cpp
IntVector::IntVector(int arr[], int begin, int end) {
   // Check if the beginning index is larger than the end index
   if (begin > end) {
       size = 0;
       capacity = 0;
       data = nullptr;
   } else {
       size = end - begin + 1;
       capacity = size;
       data = new int[capacity];

       // Copy the values from the array to the IntVector within the specified range
       for (int i = 0; i < size; i++) {
           data[i] = arr[begin + i];
       }
   }
}
```

Examples:

```cpp
int arr[10] = {4, 7, 9, 8, 1, 9, 2, 3, 5, 0};
IntVector v(arr, 3, 6); // constructs a vector of capacity and size of 4, containing the values 8,1,9,2

int arr2[4] = {1, 9, 2, 5};
IntVector v2(arr2, 3, 3); // constructs a vector of capacity and size of 1, containing the value 5
```

This implementation creates a new constructor for the IntVector class that takes an array and a range as input, and constructs a vector with the values within the specified range.

Learn more about constructors:

https://brainly.com/question/29802740

#SPJ11

True: Small viruses package more information into a very small genome by using overlapping genes so that the same base sequence is read in more than one reading frame.

What are viruses? A virus is a microbe that infects a host and causes disease. The genetic material of a virus is DNA or RNA. Viruses are smaller than bacteria and cannot survive on their own. A virus needs a host cell to replicate. How small viruses package more information into a very small genome?

Viruses have small genomes, which means they have less genetic material. Despite this, viruses have been able to develop many methods of packaging their genetic material, including the use of overlapping genes to allow the same base sequence to be read in more than one reading frame.

This increases the amount of information that can be contained in a small genome. In the case of overlapping genes, the viral genome has two or more genes that are positioned in such a way that they can be translated into two or more proteins.

As a result, a single stretch of DNA or RNA can contain two or more functional elements. In the overlapping gene model, a stretch of nucleotides can be read in more than one reading frame, allowing for the production of multiple proteins from the same stretch of genetic material. This overlapping gene model is used by many small viruses to maximize their genetic capacity.

You can read more about computer viruses at https://brainly.com/question/26128220

#SPJ11

Option-A:Each webpage is assigned a Uniform Resource Locator (URL), an address that identifies the location of the page on the internet.

An URL is a standard way to specify the location of a resource on the web. The URL includes the protocol or scheme that identifies the application protocol that communicates with the webserver hosting the resource, a domain name that identifies a specific server on the internet, and the path to the file or resource on the server.
The Uniform Resource Locator (URL) is used to identify resources on the web, such as webpages, images, videos, and other files. URLs consist of several parts, including the protocol, domain name, and path to the file or resource on the server. Each webpage on the internet is assigned a unique URL that identifies the location of the page on the web.
each webpage is assigned a Uniform Resource Locator (URL) that identifies the location of the page on the internet. URLs consist of several parts, including the protocol, domain name, and path to the file or resource on the server. The Hypertext Transfer Protocol (HTTP) is used to transfer data over the web, while the Internet Protocol (IP) is responsible for identifying and addressing devices on the internet.Thus the correct answer is option-A.

For such more questions on Uniform Resource Locator:

brainly.com/question/14716338

#SPJ11

Answer:

# Read in 5 separate numbers

num1 = float(input("Enter number 1: "))

num2 = float(input("Enter number 2: "))

num3 = float(input("Enter number 3: "))

num4 = float(input("Enter number 4: "))

num5 = float(input("Enter number 5: "))

# Calculate the average of the five numbers

average = (num1 + num2 + num3 + num4 + num5) / 5

# Find the smallest (minimum) and largest (maximum) of the five entered numbers

minimum = num1

if num2 < minimum:

   minimum = num2

if num3 < minimum:

   minimum = num3

if num4 < minimum:

   minimum = num4

if num5 < minimum:

   minimum = num5

maximum = num1

if num2 > maximum:

   maximum = num2

if num3 > maximum:

   maximum = num3

if num4 > maximum:

   maximum = num4

if num5 > maximum:

   maximum = num5

# Output the average, minimum, and maximum values

print("Average:", average)

print("Minimum:", minimum)

print("Maximum:", maximum)

A situation in which a user clicks on a news article and accidentally installs malware is most likely caused by a technique called "malvertising" (short for malicious advertising).

Malvertising is a type of cyber attack in which cybercriminals create ads that contain malicious code or links to websites that host malware. These ads are then distributed across legitimate advertising networks, where they may appear on reputable websites, including news websites.

When a user clicks on one of these ads, they may be redirected to a website that hosts malware or downloads malware onto their device without their knowledge or consent. This can occur even if the user does not interact with the ad itself, as the ad may contain code that triggers the malware installation automatically when the page loads.

To protect against malvertising, users can take several precautions, such as:

Learn more about malware here brainly.com/question/22185332

#SPJ4

To set up a website with a public IP address, you would need to create an "A" (Address) record in DNS.

A Public IP Address is a unique numeric identifier assigned to a device or network on the Internet. It allows the device or network to communicate with other devices and networks on the Internet. Public IP addresses are globally routable and can be accessed from anywhere on the Internet, making them essential for hosting websites, email servers, and other online services.

To set up a website with a public IP address, you would need to create an "A" (Address) record in DNS. This record maps a domain name to the IP address of the server where the website is hosted. The A record is the most commonly used DNS record type for mapping a domain name to an IP address.

Learn more about Public IP Address on:

https://brainly.com/question/27961221

#SPJ1

Answer:

The term used to describe a machine where an operating system runs an application on top of another operating system is a virtual machine. The correct answer B.

A virtual machine (VM) is a software emulation of a physical machine that allows multiple operating systems to run on a single physical machine. This enables users to create a sandboxed environment where they can run applications without impacting the host operating system.

Virtualization is widely used in the IT industry for testing, development, and deployment of software applications, as it provides a safe and controlled environment for running software. Virtual machines are isolated from each other and from the host operating system, providing additional security and flexibility for IT administrators. Virtualization technology has become an essential component of modern computing infrastructure, allowing organizations to reduce costs, improve efficiency, and enhance security.

Learn more about virtual machine:

https://brainly.com/question/28322407

#SPJ11

Microflows are a custom logic of a Mendix application.

They allow you to define a sequence of actions that are executed when a user performs a specific action in the application, such as clicking a button. Microflows can retrieve data from the database, perform calculations, make decisions, and update data in the database. They are a key feature of Mendix's low-code development platform, allowing developers to create complex application logic without writing traditional code.

Microflows provide us the ability to communicate the application's logic. A microflow may show pages, make decisions, and conduct actions such as adding, updating, and deleting items. It provides a visual representation of what is often expressed through programming or code.

Learn more about Microflows: https://brainly.com/question/15902640

#SPJ11

The feature that enables you to ensure that when you select a child metadata, the parent element nested metadata is also selected is called cascading metadata.

Cascading metadata allows you to create relationships between elements, and when a child element is selected, its parent element is automatically selected. For example, if you have a metadata set that contains elements like "genre" and "sub-genre", then you can set up a cascading relationship between them so that when the user selects a "sub-genre" element, the "genre" element will be selected automatically.

Cascading metadata also works for more than two elements. You can set up cascading relationships for an unlimited number of elements so that when a child element is selected, all of its parent elements will also be selected.

Cascading metadata is a great way to ensure that all necessary metadata is selected when the user is entering data into a system. It's also a helpful tool for data organization and classification.

You can learn more about metadata at: brainly.com/question/14543147

#SPJ11

Answer:

he should format it like actual coding

Explanation:

Option-E : Scalability is the ability of a computer, product, or system to expand to serve a larger number of users without breaking down. It is the most suitable choice of the following options.

Scalability is the ability of a computer, product, or system to expand to serve a larger number of users without breaking down. In general, the expansion of a system can be done in two ways: horizontal and vertical.Vertical scaling is the process of increasing the capacity of a single machine. This could include upgrading the RAM, processors, or even the storage drive.

Horizontal scaling is the process of adding more machines to the system. This is also known as distributed computing because it distributes the load across multiple machines. It's important to note that horizontal scaling is typically the most preferred method because it provides more reliability and is easier to manage.Modality refers to the quality of being modal. In the field of user interfaces, modality refers to the behavior of a system when it is set to a specific mode.Thus, the correct answer is option-E scalability.

For such more questions on Scalability :

brainly.com/question/13260501

#SPJ11

The set of specific, sequential steps that describe in natural language exactly what the computer program must do to complete its task is known as a(n) algorithm.

An algorithm is a sequence of well-defined, computable operations or instructions that takes an input and produces an output. The algorithm is structured in a way that it can handle all possible inputs and produce the appropriate output.

The algorithm should be precise and detailed enough for a computer to execute it without ambiguity or mistakes. It is often written in natural language, such as structured English or pseudocode, to aid in understanding its logic and to serve as a blueprint for coding.

For such more question on algorithm:

https://brainly.com/question/15217393

#SPJ11

You may need to restore from a Windows Server Backup if any of the given circumstances occur like a system crash or system malfunction, a virus or malware infection, accidental deletion of files, or system settings and hardware failure. So, the windows server backup is required in all given situations.

In any of these scenarios, restoring from a Windows Server Backup can save the day by quickly restoring the system to its initial state and eliminating the need to re-install the software, reconfigure settings, and manually recover lost data. A Windows Server Backup includes a full system image, system state, application settings, and user data.

This helps ensure that the system can be restored as it was prior to the incident. The process of restoring from a Windows Server Backup is relatively straightforward. First, the Windows Server Backup utility should be launched on the affected system. Once the utility runs, you can select the restore option and browse the available backup sets.

Finally, select the desired backup set, select the files you want to restore, and complete the process by clicking the "Restore" button.

So, the correct answer to the question "under what circumstances might you need to restore from a windows server backup? (choose all that apply.) system crash or system malfunction, a virus or malware infection, accidental deletion of files, or system settings and hardware failure" is all of the given choices are applicable as Windows server backup is required in all given situations including a system crash or system malfunction, a virus or malware infection, accidental deletion of files, or system settings and hardware failure

You can learn more about Windows Server Backup at: brainly.com/question/30465635

#SPJ11

No, a 256-bit RSA key does not provide the same level of security as a 256-bit AES key.

RSA and AES are two different encryption algorithms that use different approaches to encrypting data. RSA is a public-key encryption algorithm that uses a pair of keys, a public key and a private key, to encrypt and decrypt data. AES, on the other hand, is a symmetric-key encryption algorithm that uses the same key for both encryption and decryption. In general, symmetric-key algorithms like AES are considered to be more secure than public-key algorithms like RSA for encrypting large amounts of data.

Data is converted into ciphertext using an encryption technique. The data will be altered by an algorithm using the encryption key in a predictable fashion, such that even though the encrypted data may seem random, it can be decrypted and returned to plaintext using the decryption key.

Learn more about encryption algorithms: https://brainly.com/question/28283722

#SPJ11

An RFID is a group of wireless transmitters. Which is an option (b).

What is RFID?

RFID stands for Radio Frequency Identification, which is a method of wireless communication. RFID chips, also known as tags or transponders, are used in RFID systems.

An RFID reader sends out an electromagnetic wave that interacts with the RFID chip and retrieves information from it. RFID chips are found in a variety of objects, including credit cards, passports, and inventory items. They can also be implanted in animals and people for identification purposes.

Because RFID does not require direct contact or line-of-sight, it can be used in a variety of applications, including toll booths, inventory management, and access control systems.

Therefore, the correct answer is "a wireless transmitter."

To know more about RFID: https://brainly.com/question/25705532

#SPJ11