People have looked up at birds for years and they have inspired us to fly. Airplanes have wings, just like birds. They also have a light skeleton (or framework) to decrease their weight, and they have a streamlined shape to decrease drag.
When you look at a fish from the edge of a pond, the fish appears.... need more information lower in the water than it actually is exactly where it is higher in the water than it actually is
When looking at a fish from the edge of a pond, it appears higher in the water than it actually is.
This phenomenon is caused by the way light travels through water and enters our eyes. When light passes from one medium (such as water) to another medium (such as air), it changes direction due to refraction.
The speed of light is slower in water than in air, causing the light rays to bend as they enter and exit the water. When we observe a fish from the edge of a pond, our eyes perceive the fish's apparent position by following the direction of the refracted light rays.
Since light rays bend away from the normal (an imaginary line perpendicular to the water's surface) when they transition from water to air, the fish appears higher in the water than its actual position.
This is because the light rays from the lower part of the fish's body bend upward as they leave the water, making the fish's image appear elevated.
The phenomenon is similar to how a straw appears bent when placed in a glass of water due to the refraction of light. Therefore, when observing a fish from the edge of a pond, its true position is lower in the water than it appears to be.
Learn more about light here ;
https://brainly.com/question/31064438
#SPJ11
During a certain time interval, the angular position of a swinging door is described by 0 = 5.08 + 10.7t + 1.98t2, where 0 is in radians and t is in seconds. Determine the angular position, angular speed, and angular acceleration of the door at the following times.
The angular position of the door at t = 0.8 s is 11.5 rad, angular speed is 13.5 rad/s, and angular acceleration is 3.96 rad/s².
The given equation describes the angular the angular position of the door at t = 0.8 s is 11.5 rad, angular speed is 13.5 rad/s, and angular acceleration is 3.96 rad/s².position of a swinging door:0 = 5.08 + 10.7t + 1.98t²The angular position (θ) can be determined asθ = 5.08 + 10.7t + 1.98t²Let's calculate the angular position of the door at t = 0.8 s;θ = 5.08 + 10.7(0.8) + 1.98(0.8)²θ = 11.496 rad (rounded to three significant figures)The angular position of the door at t = 0.8 s is 11.5 rad.The angular speed (ω) is the time derivative of the angular position (θ) with respect to time (t).ω = dθ/dt = 10.7 + 3.96t
Let's calculate the angular speed of the door at t = 0.8 s;ω = 10.7 + 3.96(0.8)ω = 13.502 rad/s (rounded to three significant figures)The angular speed of the door at t = 0.8 s is 13.5 rad/s.The angular acceleration (α) is the time derivative of the angular speed (ω) with respect to time (t).α = dω/dt = 3.96Let's calculate the angular acceleration of the door at t = 0.8 s;α = 3.96 rad/s²The angular acceleration of the door at t = 0.8 s is 3.96 rad/s². Hence, the angular position of the door at t = 0.8 s is 11.5 rad, angular speed is 13.5 rad/s, and angular acceleration is 3.96 rad/s².
Learn more about Equation here,
https://brainly.com/question/29174899
#SPJ11
Suppose that you are experimenting with a 15 V source and two resistors: R₁= 2500 2 and R₂ = 25 Q. Find the current for a, b, c, and d below. What do you notice? a. R₂ in a circuit alone
The current through R₂ in the circuit alone is 0.6 A.Notice:When R₂ is in a circuit alone, the current flowing through it is 0.6 A.
Given that, the voltage, V = 15 VResistance, R₁ = 2500 ΩResistance, R₂ = 25 ΩWe know that the current (I) can be calculated using Ohm's Law, which states that the current (I) through a conductor between two points is directly proportional to the voltage (V) across the two points and inversely proportional to the resistance (R) between them.The formula to calculate current using Ohm's Law is given by:I = V / Rwhere I is the current, V is the voltage and R is the resistance.a. R₂ in a circuit alone:
To find the current for R₂ in the circuit alone, we need to use the formula: I = V / ROn substituting the given values, we getI = 15 / 25I = 0.6 ATherefore, the current through R₂ in the circuit alone is 0.6 A.Notice:When R₂ is in a circuit alone, the current flowing through it is 0.6 A.
Learn more about Voltage here,
https://brainly.com/question/27861305
#SPJ11
Part A - Find the speed (in terms of c) of a particle (for example, an electron) whose relativistic kinetic energy KE is 5 times its rest energy E 0
. For example, if the speed is 0.500 c, enter only 0.500. Keep 3 digits after the decimal point.
The speed (in terms of c) of a particle, such as an electron, can be determined when its relativistic kinetic energy (KE) is five times its rest energy (E0). By solving the equation, we can find the speed. For example, if the speed is 0.500 c, enter only 0.500, keeping three digits after the decimal point.
To find the speed of the particle, we can start by using the relativistic kinetic energy equation: KE = (γ - 1)E0, where γ is the Lorentz factor given by γ = 1 / sqrt(1 - v^2 / c^2). Here, v is the velocity of the particle and c is the speed of light.
We are given that KE = 5E0, so we can substitute this into the equation and solve for γ. Substituting KE = 5E0 into the equation gives us 5E0 = (γ - 1)E0. Simplifying, we find γ - 1 = 5, which leads to γ = 6.
Next, we can solve for v by substituting γ = 6 into the Lorentz factor equation: 6 = 1 / sqrt(1 - v^2 / c^2). Squaring both sides and rearranging, we get v^2 / c^2 = 1 - 1/γ^2. Plugging in the value of γ, we find v^2 / c^2 = 1 - 1/36, which simplifies to v^2 / c^2 = 35/36. Solving for v, we take the square root of both sides to get v / c = sqrt(35/36). Evaluating this expression, we find v / c ≈ 0.961.
Learn more about Lorentz factor here:
https://brainly.com/question/30784090
#SPJ11
When you run from one room to another, you're moving through:
A. Space
B. Time
C. Both
D. Cannot tell with the information given.
I think number c is the answer of this question
If the frequency of a wave of light is 6.8 x 108 Hz, what is it's wavelength. c = 3.0 x 108 m/s
A. 4.41 x 10-1 m/s
B. 2.04 x 1017 m/s
C. 4.41 x 10-1 m
D. 2.27 m
The wavelength of the wave of light is approximately 4.41 x 10^-1 m, which corresponds to option C) in the given choices.
The wavelength of a wave is inversely proportional to its frequency, according to the equation: λ = c / f, where λ represents wavelength, c represents the speed of light, and f represents frequency. To find the wavelength, we can substitute the given values into the equation.
Given that the frequency of the wave is 6.8 x 10^8 Hz and the speed of light is 3.0 x 10^8 m/s, we can calculate the wavelength as follows: λ = (3.0 x 10^8 m/s) / (6.8 x 10^8 Hz) ≈ 4.41 x 10^-1 m
Learn more about wavelength here:
https://brainly.com/question/31322456
#SPJ11
An inductor of L=8.15H with negligible resistance is placed in series with a E=15.3 V battery, a R=3.00Ω resistor, and a switch. The switch is closed at time t=0 seconds. Calculate the initial current at t=0 seconds. I(t=0 s)= A Calculate the current as time approaches infinity. I max
= Calculate the current at a time of 2.17 s. I(t=2.17 s)= A Determine how long it takes for the current to reach half of its maximum.
Tt takes 2.07 seconds for the current to reach half of its maximum.
Given data:
L = 8.15 H Battery voltage, E = 15.3 VR = 3.00 Ω
From the given data, the initial current (I) flowing through the circuit at the time, t = 0 can be calculated using the equation for inductor in series with a resistor.I = E / (R + L di/dt)
Here, R = 3.00 Ω, L = 8.15 H, E = 15.3 V and t = 0 seconds∴ I (t = 0 s) = E / (R + L di/dt) = 15.3 / (3.00 + 8.15*0) = 15.3 / 3.00 = 5.1 A
The initial current (I) at t = 0 seconds is 5.1 A. The current through the circuit as the time approaches infinity, Imax is given by; I(max) = E / R = 15.3 / 3.00 = 5.1 A
Therefore, the current as the time approaches infinity is 5.1 A. The current at a time of 2.17 seconds can be calculated by the equation; I = I(max)(1 - e ^(-t/(L/R)))Here, L/R = τ is called the time constant of the circuit, and e is the base of the natural logarithm, ∴ I(t = 2.17 s) = I(max)(1 - e^(-2.17/τ)) = I(max)(1 - 1 - [tex]e^{-2.17/(L/R)}[/tex]) = I(max)(1 -[tex]e^{(-2.17/(8.15/3))}[/tex] ) = 5.1(1 - [tex]e^{-0.844}[/tex]) = 2.11 A
Therefore, the current at a time of 2.17 seconds is 2.11 A. The time taken for the current to reach half of its maximum can be calculated by the equation for current; I = I(max)(1 - [tex]e^{-t/(L/R)}[/tex])
Here, when I = I(max)/2, t = τ/ln(2), where ln(2) is the natural logarithm of 2.∴ t = τ/ln(2) = (L/R)ln(2) = (8.15/3)ln(2) = 2.07 s
Therefore, it takes 2.07 seconds for the current to reach half of its maximum.
To learn about current here:
https://brainly.com/question/1100341
#SPJ11
Recent studies show that getting some form of exercise three to five days per week can help raise good cholesterol by nearly 10%.
True
False
The given statement "getting some form of exercise three to five days per week can help raise good cholesterol by nearly 10%." is false because Regular physical activity is known to have positive effects on lipid profiles, including increasing high-density lipoprotein (HDL) cholesterol, often referred to as "good" cholesterol.
Exercise has been widely recognized as a beneficial activity for overall health, including cardiovascular health. However, stating that getting some form of exercise three to five days per week can help raise good cholesterol by nearly 10% is an oversimplification. The impact of exercise on HDL cholesterol levels can vary depending on various factors, including individual characteristics, intensity and duration of exercise, and baseline cholesterol levels.
While exercise has been associated with improvements in HDL cholesterol, the magnitude of the effect is influenced by several factors. Some studies have reported increases in HDL cholesterol levels ranging from modest to substantial, but a consistent 10% increase solely from three to five days of exercise per week is not supported by recent scientific evidence.
It's important to note that the effects of exercise on cholesterol levels can also be influenced by other lifestyle factors such as diet, genetics, and overall health status. Therefore, individuals should adopt a comprehensive approach to improve their lipid profile, incorporating regular exercise along with a balanced diet and other healthy lifestyle choices.
Know more about high-density lipoprotein here:
https://brainly.com/question/841110
#SPJ8
A circular region 8.00 cm in radius is filled with an electric field perpendicular to the face of the circle. The magnitude of the field in the circle varies with time as E(t)=E0cos(ωt) where E0=10.V/m and ω=6.00×109 s−1. What is the maximum value of the magnetic field at the edge of the region? T
Therefore, the maximum value of the magnetic field at the edge of the region is 6.37×10−7 T. Answer: 6.37×10−7 T.
The time-varying electric field produces a time-varying magnetic field according to Faraday's law. The maximum magnetic field on the edge of the circular region can be determined using the equation for the magnetic field: B = μ0ωE0r / (2c) where μ0 is the permeability of free space, ω is the angular frequency, E0 is the amplitude of the electric field, r is the radius of the circular region, and c is the speed of light.
This equation applies when the radius of the region is much smaller than the wavelength of the electromagnetic wave. Here, the radius is only 8.00 cm, whereas the wavelength is λ = 2πc / ω = 5.24×10−3 cm. Therefore, the equation is valid. We can substitute the given values to get: Bmax = μ0ωE0r / (2c) = (4π×10−7 T m A−1)(6.00×109 s−1)(10. V/m)(8.00×10−2 m) / (2 × 3.00×108 m/s) = 6.37×10−7 T.
Therefore, the maximum value of the magnetic field at the edge of the region is 6.37×10−7 T. Answer: 6.37×10−7 T.
Learn more about equation here,
https://brainly.com/question/29174899
#SPJ11
Light from a burning match propagates from left to right, first through a thin lens of focal length 5.7 cm, and then through another thin lens, with a 9.9-cm focal length. The lenses are fixed 30.5 cm apart. A real image of the flame is formed by the second lens at a distance of 23.2 cm from the lens.
How far from the second lens, in centimeters, is its optical object located?
How far is the burning match from the first lens, in centimeters?
a) The optical object is located approximately 17.26 cm from the second lens.
b) The burning match is located approximately 7.57 cm from the first lens.
To find the distance of the optical object from the second lens, we can use the lens formula:
1/f = 1/v - 1/u
where f is the focal length of the lens, v is the image distance, and u is the object distance.
Let's denote the distance of the optical object from the second lens as u2. We know that the focal length of the second lens is 9.9 cm and the image distance is 23.2 cm. Plugging these values into the lens formula:
1/9.9 cm = 1/23.2 cm - 1/u2
Simplifying the equation:
1/u2 = 1/23.2 cm - 1/9.9 cm
1/u2 = (9.9 cm - 23.2 cm)/(23.2 cm * 9.9 cm)
1/u2 = -13.3 cm / (229.68 cm^2)
u2 = - (229.68 cm^2) / 13.3 cm
u2 = -17.26 cm
The negative sign indicates that the object is located on the same side as the image.
To find the distance of the burning match from the first lens, we can use the lens formula again, this time for the first lens.
Let's denote the distance of the burning match from the first lens as u1. We know that the focal length of the first lens is 5.7 cm. Plugging this value and the distance between the lenses (30.5 cm) into the lens formula:
1/5.7 cm = 1/23.2 cm - 1/u1
Simplifying the equation:
1/u1 = 1/23.2 cm - 1/5.7 cm
1/u1 = (5.7 cm - 23.2 cm)/(23.2 cm * 5.7 cm)
1/u1 = -17.5 cm / (132.64 cm^2)
u1 = - (132.64 cm^2) / 17.5 cm
u1 = -7.57 cm
Again, the negative sign indicates that the object is located on the same side as the image.
To know more about lens formula
https://brainly.com/question/30241648
#SPJ11
A light source generates a planar electromagnetic that travels in air with speed c. The intensity is 5.7 W/m2 What is the peak value of the magnetic field on the wave?
A light source generates a planar electromagnetic that travels in air with speed c. the peak value of the magnetic field on the wave is approximately [tex]1.246 * 10^{(-6)}[/tex] Tesla.
The peak value of the magnetic field on an electromagnetic wave can be determined using the formula:
B_peak = sqrt(2 * ε_0 * c * I)
where:
B_peak is the peak value of the magnetic field,
ε_0 is the vacuum permittivity (ε_0 ≈ 8.854 x 10^(-12) C^2/N*m^2),
c is the speed of light in vacuum (c ≈ 3 x 10^8 m/s), and
I is the intensity of the wave in watts per square meter.
Plugging in the given values:
I = 5.7 W/m^2
We can calculate the peak value of the magnetic field as follows:
B_peak =[tex]sqrt(2 * (8.854 * 10^(-12) C^2/N*m^2) * (3 * 10^8 m/s) * (5.7 W/m^2))[/tex]
B_peak = [tex]sqrt(2 * (8.854 x 10^{(-12)} C^2/N*m^2) * (3 x 10^8 m/s) * (5.7 J/s/m^2))[/tex]
B_peak = [tex]sqrt(2 * (8.854 x 10^{(-12)} C^2/N*m^2) * (3 x 10^8 m/s) * (5.7 kg*m^2/s^3/m^2))[/tex]
B_peak =[tex]sqrt(2 * (8.854 x 10^{(-12)} C^2/N*m^2) * (3 x 10^8 m/s) * (5.7 kg*m/s^3))[/tex]
B_peak = [tex]sqrt(2 * (8.854 * 10^{(-12)} C^2/N*m^2) * (3 x 10^8 m/s) * (5.7 kg*m/s^3))[/tex]
B_peak ≈ [tex]1.246 x 10^{(-6)}[/tex] Tesla
Therefore, the peak value of the magnetic field on the wave is approximately[tex]1.246 x 10^{(-6)}[/tex]Tesla.
Learn more about magnetic field here:
https://brainly.com/question/7645789
#SPJ11
A 5.0 kg box has an acceleration of 2.0 m/s² when it is pulled by a horizontal force across a surface with uk = 0.50. Determine the work done over a distance of 10 cm by (a) the horizontal force, (b) the frictional force, and (c) the net force. (d) Evaluate the change in kinetic energy of the box.
a) The work done by the horizontal force is 1.0 J.
(b) The work done by the frictional force is -1.0 J.
(c) The work done by the net force is 0 J.
(d) The change in kinetic energy of the box is 10 J.
(a) The work done by the horizontal force can be calculated using the formula W = Fd, where W represents work, F represents the force applied, and d represents the displacement. In this case, the force applied is the horizontal force, and the displacement is given as 10 cm, which is equal to 0.1 m. Therefore, W = Fd =[tex]5.0\times2.0\times1.0[/tex] = 1.0 J.
(b) The work done by the frictional force can be calculated using the formula W=-μkN d, where W represents work, μk represents the coefficient of kinetic friction, N represents the normal force, and d represents the displacement. The normal force is equal to the weight of the box, which is given as N = mg = [tex]5.0\times9.8[/tex] = 49 N. Substituting the values, W = [tex]-0.50\times49\times0.1[/tex] = -1.0 J.
(c) The work done by the net force is equal to the sum of the work done by the horizontal force and the work done by the frictional force. Therefore, W = 1.0 J + (-1.0 J) = 0 J.
(d) The change in kinetic energy of the box is equal to the work done by the net force, as given by the work-energy theorem. Therefore, the change in kinetic energy is 0 J.
Learn more about force here:
https://brainly.com/question/13191643
#SPJ11
The amount of work done on a rotating body can be expressed in terms of the product of Select one: O A. torque and angular velocity. ОВ. force and lever arm. O C. torque and angular displacement. OD force and time of application of the force. O E torque and angular acceleration.
The amount of work done on a rotating body can be expressed in terms of the product of torque and angular displacement.
When a force is applied to a rotating body, it produces a torque that causes angular displacement. The work done on the body can be calculated by multiplying the torque applied to the body and the angular displacement it undergoes.
Torque is a measure of the rotational force applied to an object and is defined as the product of the force applied perpendicular to the radius and the lever arm, which is the perpendicular distance from the axis of rotation to the line of action of the force.
Angular displacement, on the other hand, is the change in the angle through which the body rotates. Therefore, the product of torque and angular displacement gives the work done on the rotating body.
This relationship is analogous to the linear case where work is the product of force and displacement. Thus, the correct answer is option C, torque and angular displacement.
Learn more about torque here;
https://brainly.com/question/30338175
#SPJ11
Fifteen identical particles have various speeds. One has a speed of 4.00 m/s, two have a speed of 5.00 m/s, three have a speed of 7.00 m/s, four have a speed of 5.00 m/s, three have a speed of 10.0 m/s and two have a speed of 14.0 m/s. Find (a) the average speed, (b) the rms speed, and (c) the most probable speed of these particles. (a) 7.50 m/s; (b) 8.28 m/s; (c) 14.0 m/s (a) 7.53 m/s; (b) 8.19 m/s; (c) 5.00 m/s (a) 7.53 m/s; (b) 8.19 m/s; (c) 14.0 m/s (a) 7.50 m/s; (b) 8.28 m/s; (c) 5.00 m/s If vector B
is added to vector A
, the result is 6i+j. If B
is subtracted from A
, the result is −ii+7j. What is the magnitude of A
? 5.4 5.8 5.1 4.1 8.2
The answers to the given questions are:
(a) Average speed: 7.50 m/s
(b) RMS speed: 8.28 m/s
(c) Most probable speed: 5.00 m/s
To find the average speed, we sum up all the speeds and divide by the total number of particles. Calculating the average speed gives us (1 * 4 + 2 * 5 + 3 * 7 + 4 * 5 + 3 * 10 + 2 * 14) / 15 = 7.50 m/s.
The root mean square (RMS) speed is calculated by taking the square root of the average of the squares of the speeds. We square each speed, calculate the average, and then take the square root. This gives us the RMS speed as sqrt[(1 * 4^2 + 2 * 5^2 + 3 * 7^2 + 4 * 5^2 + 3 * 10^2 + 2 * 14^2) / 15] ≈ 8.28 m/s.
The most probable speed corresponds to the peak of the speed distribution. In this case, the speed of 5.00 m/s occurs the most frequently, with a total of 2 + 4 = 6 particles having this speed. Therefore, the most probable speed is 5.00 m/s.
Regarding the second question, we have two equations: A + B = 6i + j and A - B = -i + 7j.
By solving these equations simultaneously, we can find the values of A and B.
Adding the two equations, we get 2A = 5i + 8j, which means A = (5/2)i + 4j.
The magnitude of A is given by the formula sqrt[(5/2)^2 + 4^2] ≈ 5.8. Therefore, the magnitude of A is approximately 5.8.
Learn more about RMS speed and RMS speed:
https://brainly.com/question/12896215
#SPJ11
A proton moves at 6.00×1076.00×107 m/s perpendicular to a magnetic field. The field causes the proton to travel in a circular path of radius 0.6 m. What is the field strength?
B= Unit=
The field strength experienced by the proton is approximately 0.1045 T (tesla).
Velocity of the proton (v) = 6.00 × 10^7 m/s
Radius of the circular path (r) = 0.6 m
Mass of the proton (m) = 1.67 × 10^−27 kg
Charge of the proton (q) = 1.6 × 10^−19 C
The force experienced by the proton is the centripetal force, given by the equation F = mv²/r, where F is the force, m is the mass, v is the velocity, and r is the radius.
The magnetic force experienced by the proton is given by the equation F = qvB, where q is the charge, v is the velocity, and B is the magnetic field strength.
Since the two forces are equal, we can equate them:
mv²/r = qvB
Simplifying the equation, we find:
B = (mv)/qr
Substituting the given values:
B = [(1.67 × 10^−27 kg) × (6.00 × 10^7 m/s)] / [(1.6 × 10^−19 C) × (0.6 m)]
Calculating the value:
B = (1.002 × 10^−20 kg·m/s) / (9.6 × 10^−20 C·m)
B = 0.1045 T (tesla)
Therefore, the field strength experienced by the proton is approximately 0.1045 T.
The field strength, measured in tesla, represents the intensity of the magnetic field. In this case, the magnetic field is responsible for causing the proton to move in a circular path. The calculation allows us to determine the strength of the field based on the known parameters of the proton's velocity, mass, charge, and radius of the circular path.
Understanding the field strength is essential for studying the behavior of charged particles in magnetic fields and for various applications such as particle accelerators, MRI machines, and magnetic levitation systems.
Learn more about magnetic field here:
https://brainly.com/question/31599818
#SPJ11
A moon of mass 61155110207639460000000 kg is in circular orbit around a planet of mass 34886454477079273000000000 kg. The distance between the centers of the the planet and the moon is 482905951 m. At what distance (in meters) from the center of the planet will the net gravitational field due to the planet and the moon be zero? (provide your answer to 2 significant digits in exponential format. For example, the number 12345678 should be written as: 1.2e+7)
The net gravitational field due to the planet and the moon will be zero at a distance of approximately 4.8e+8 meters from the center of the planet.
To find the distance from the center of the planet where the net gravitational field is zero, we can consider the gravitational forces exerted by the planet and the moon on an object at that point. At this distance, the gravitational forces from the planet and the moon will cancel each other out.
The gravitational force between two objects can be calculated using the formula:
F = G * (m1 * m2) / r^2
Where F is the gravitational force, G is the gravitational constant (approximately 6.67430e-11 N m^2/kg^2), m1 and m2 are the masses of the objects, and r is the distance between their centers.
Since the net gravitational field is zero, the magnitudes of the gravitational forces exerted by the planet and the moon on the object are equal:
F_planet = F_moon
Using the above formula and rearranging for the distance r, we can solve for the distance:
r = sqrt((G * m1 * m2) / F)
Substituting the given values into the equation:
r = sqrt((G * (34886454477079273000000000 kg) * (61155110207639460000000 kg)) / F)
The distance r turns out to be approximately 4.8e+8 meters, or 480,000,000 meters, from the center of the planet. This is the distance at which the net gravitational field due to the planet and the moon is zero.
Learn more about net gravitational field here:
https://brainly.com/question/32673233
#SPJ11
A cat, a mouse and a dog are in a race. The mouse is currently leading, running at a constant 5 m/s. The cat is lagging slightly behind, running at a constant 2.25 m/s. The dog is the farthest behind, running at 2.0 m/s.
What is the velocity (magnitude and direction) of the dog relative to the cat?
What is the velocity (magnitude and direction) of the mouse relative to the dog?
A boat that is able to travel at 5 m/s relative to water needs to go across a 10 m wide river that flows to the left at 2 m/s.
If the boat leaves the river bank perpendicular to the flow of the river,
what is its velocity relative to the shore?
how much distance downstream would the boat hit the other bank?
iii. how much time does it take to get to the other bank?
B. If the boat wants to get to a point directly across the river on the other side,
at what angle upstream should it travel?
how much time does it take to get to the other bank?
A. The velocity (magnitude and direction) of the dog relative to the cat is 0.25 m/s in the direction of the cat. The velocity is obtained by subtracting the velocity of the cat from the velocity of the dog which gives the velocity of the dog relative to the cat:velocity of dog relative to cat = velocity of dog - velocity of catvelocity of dog relative to cat = 2.0 m/s - 2.25 m/svelocity of dog relative to cat = -0.25 m/s The negative sign indicates that the dog is behind the cat in the direction of the cat.
B. The velocity (magnitude and direction) of the mouse relative to the dog is 3 m/s in the direction of the mouse. The velocity is obtained by subtracting the velocity of the dog from the velocity of the mouse which gives the velocity of the mouse relative to the dog:velocity of mouse relative to dog = velocity of mouse - velocity of dogvelocity of mouse relative to dog = 5 m/s - 2.0 m/svelocity of mouse relative to dog = 3 m/s The positive sign indicates that the mouse is in front of the dog in the direction of the mouse.
C. The velocity (magnitude and direction) of the boat relative to the shore is 3 m/s perpendicular to the flow of the river. The velocity of the boat relative to the water is 5 m/s and the velocity of the river is 2 m/s to the left. The velocity of the boat relative to the shore is given by:velocity of boat relative to shore = velocity of boat relative to water + velocity of rivervelocity of boat relative to shore = 5 m/s + 2 m/svelocity of boat relative to shore = 3 m/s
D. The boat hits the other bank 8.16 meters downstream. The time to cross the river is 2 seconds. The distance downstream can be obtained by multiplying the time by the velocity of the river which gives the distance the boat drifts downstream:distance downstream = time x velocity of riverdistance downstream = 2 s x 2 m/sdistance downstream = 4 meters The distance perpendicular to the flow of the river can be obtained by using Pythagoras' theorem:distance perpendicular = √(102 + 42)distance perpendicular = √116distance perpendicular = 10.77 meters
The total distance the boat travels can be obtained by adding the distance downstream to the distance perpendicular:total distance = distance downstream + distance perpendiculartotal distance = 4 m + 10.77 mtotal distance = 14.77 meters E. The boat should travel at an angle of 23.2 degrees upstream. The velocity of the boat relative to the water is 5 m/s and the velocity of the river is 2 m/s to the left.
The velocity of the boat relative to the shore is perpendicular to the flow of the river and it is the hypotenuse of a right triangle. The angle that the velocity of the boat relative to the shore makes with the velocity of the boat relative to the water can be obtained by using trigonometry:tan θ = velocity of river / velocity of boat relative to watertan θ = 2 m/s / 5 m/stan θ = 0.4θ = 23.2 degrees The time to cross the river is 2.31 seconds.
The distance the boat drifts downstream is obtained by multiplying the time by the velocity of the river which gives the distance the boat drifts downstream:distance downstream = time x velocity of riverdistance downstream = 2.31 s x 2 m/sdistance downstream = 4.62 meters The distance perpendicular to the flow of the river can be obtained by using trigonometry:cos θ = velocity of shore / velocity of boat relative to watervelocity of shore = cos θ x velocity of boat relative to watervelocity of shore = cos 23.2 degrees x 5 m/svelocity of shore = 4.53 m/s
The distance perpendicular to the flow of the river can be obtained by dividing the width of the river by the cosine of the angle:distance perpendicular = width of river / cos θdistance perpendicular = 10 m / cos 23.2 degreesdistance perpendicular = 10.87 meters The total distance the boat travels can be obtained by adding the distance downstream to the distance perpendicular:total distance = distance downstream + distance perpendiculartotal distance = 4.62 m + 10.87 mtotal distance = 15.49 meters The time to cross the river is obtained by dividing the total distance by the velocity of the boat relative to the water:time to cross the river = total distance / velocity of boat relative to watertime to cross the river = 15.49 m / 5 m/stime to cross the river = 2.31 seconds.
Learn more about Velocity here,
https://brainly.com/question/80295
#SPJ11
A marble rolls off a horizontal tabletop that is 0.97 m high and hits the floor at a point that is a horizontal distance of 3.64 m from the edge of the table.
a) How much time, in seconds, was the marble in the air?
b) what is the speed of the marble as it rolled off the table?
c) what was the marble's speed just before hitting the floor?
a) The marble was in the air for approximately 0.64 seconds.
b) The speed of the marble as it rolled off the table was 4.81 m/s.
c) The marble's speed just before hitting the floor was 8.69 m/s.
a) To determine the time the marble was in the air, we can use the equation h = 0.5 * g * t^2, where h is the height, g is the acceleration due to gravity (approximately 9.8 m/s^2), and t is the time. Rearranging the equation, we get t = sqrt(2h / g). Substituting the given values, t = sqrt(2 * 0.97 m / 9.8 m/s^2) ≈ 0.64 s.
b) The speed of the marble as it rolled off the table can be found using the equation v = sqrt(2gh), where v is the velocity, g is the acceleration due to gravity, and h is the height. Substituting the given values, v = sqrt(2 * 9.8 m/s^2 * 0.97 m) ≈ 4.81 m/s.
c) To calculate the marble's speed just before hitting the floor, we can use the equation v = sqrt(v0^2 + 2g * d), where v is the final velocity, v0 is the initial velocity (which is the speed as it rolled off the table), g is the acceleration due to gravity, and d is the horizontal distance traveled. Substituting the given values, v = sqrt((4.81 m/s)^2 + 2 * 9.8 m/s^2 * 3.64 m) ≈ 8.69 m/s.
Learn more about acceleration due to gravity here:
https://brainly.com/question/14550373
#SPJ11
if the electric field is zero everywhere inside a region of space, the potential must also be zero in that region.
choices:
true always
true sometimes
false always
more info is needed
none of the above
The correct answer is "true always." If the electric field is zero everywhere inside a region of space, it implies that there are no electric field lines passing through that region.
This indicates that there are no potential differences between any points within the region.
In electrostatics, the potential is defined as the amount of work needed to move a unit positive charge from one point to another against the electric field.
If there is no electric field, no work is required to move the charge, meaning there is no potential difference. Therefore, the potential is zero throughout the region.
This relationship is a consequence of the fundamental property of conservative electric fields. In conservative fields, the electric field can be expressed as the gradient of a scalar function called the electric potential.
Consequently, if the electric field is zero, the gradient of the electric potential is also zero, implying a constant potential throughout the region.
Hence, when the electric field is zero everywhere inside a region of space, the potential must also be zero in that region.
To learn more about electric field lines visit:
brainly.com/question/21661975
#SPJ11
Two identical waves each have an amplitude of 6 cm and interfere with one another. You observe that the resultant wave has an amplitude of 12 cm. Of the phase differences listed (in units of radian), which one(s) could possibly represent the phase difference between these two waves? I. 0 II. TU III. IV. V. REIN 2 2π 3πT 4
Two identical waves each have an amplitude of 6 cm and interfere with one another. Therefore, only phase difference 0 could possibly represent the phase difference between these two waves. Therefore, the correct option is I.
In a wave, the amplitude determines the wave's maximum height (above or below its rest position), whereas the phase determines the wave's location in its cycle at a particular moment in time.
Since the waves have an amplitude of 6 cm, the resulting wave has an amplitude of 12 cm. It means that the waves are constructive and in phase.
Constructive interference happens when waves with the same frequency and amplitude align.
The combined amplitude of the two waves is equal to the sum of their individual amplitudes when this happens.
The formula for the resultant wave's amplitude is 2A cos(ϕ/2), where A is the amplitude of the two waves, and ϕ is the phase difference.ϕ = 0 corresponds to in-phase waves.
ϕ = 2π corresponds to waves that are shifted by one complete wavelength.
ϕ = π corresponds to waves that are shifted by half a wavelength.ϕ = 3π corresponds to waves that are shifted by 1.5 wavelengths.
ϕ = 4 corresponds to waves that are shifted by two complete wavelengths.
ϕ = T corresponds to waves that are shifted by the time period of the wave.
Therefore, only phase difference 0 could possibly represent the phase difference between these two waves. Therefore, the correct option is I.
Learn more about amplitude here:
https://brainly.com/question/9525052
#SPJ11
lamp and a 30 02 lamp are connected in series with a 10 V battery. Calculate the following: a. the equivalent resistance Question 18 1 pts A 20 02 lamp and a 30 02 lamp are connected in series with a 10 V battery. Calculate the following: the current through the circuit
We can calculate the current through the circuit using Ohm's Law;i = V/RWhere, V is the potential difference applied across the circuit and R is the resistance of the circuit. Substituting the given values;i = 10 V / 50 Ω = 0.2 ATherefore, the current through the circuit is 0.2 A.
Given information:Two lamps - a 20 Ω lamp and a 30 Ω lamp are connected in series with a 10 V battery.To calculate: The equivalent resistance and current through the circuit.The equivalent resistance of the circuit is given by;Req = R1 + R2Where, R1 and R2 are the resistances of the lamps in the circuit.Substituting the given values;Req = 20 Ω + 30 Ω = 50 ΩThe equivalent resistance of the circuit is 50 Ω.Now, we can calculate the current through the circuit using Ohm's Law;i = V/RWhere, V is the potential difference applied across the circuit and R is the resistance of the circuit. Substituting the given values;i = 10 V / 50 Ω = 0.2 ATherefore, the current through the circuit is 0.2 A.
Learn more about Equivalent here,
https://brainly.com/question/12914569
#SPJ11
A force that varies with time F-13t²-4t+3 acts on a sled of mass 13 kg from t₁ = 1.7 seconds to t₂ -3.7 seconds. If the sled was initially at rest, determine the final velocity of the sled. Record your answer with at least three significant figures.
The final velocity of the sled is approximately -6.58 m/s.
The net force F on the sled of mass m is given by the function F = -13t²-4t+3, and we are to determine its final velocity. We can use the impulse-momentum principle to solve the problem. Since the sled was initially at rest, its initial momentum p1 is zero. The impulse J of the net force F over the time interval [t₁,t₂] is given by the definite integral of F with respect to time over this interval, that is:J = ∫[t₁,t₂] F dt = ∫[1.7,3.7] (-13t²-4t+3) dt = [-13t³/3 - 2t² + 3t]t=1.7t=3.7≈ -85.522 JThe impulse J is equal to the change in momentum p2 - p1 of the sled over this interval. Therefore:p2 - p1 = J, p2 = J + p1 = J = -85.522 kg m/sSince the mass of the sled is m = 13 kg, its final velocity v2 is:v2 = p2/m ≈ -6.58 m/sHence, the final velocity of the sled is approximately -6.58 m/s.
Learn more about Momentum here,hello what is momentum?
https://brainly.com/question/18798405
#SPJ11
A 20.0 cm20.0 cm diameter sphere contains two charges: q1 = +10.0 μCq1 = +10.0 μC and q2 = +10.0 μCq2 = +10.0 μC . The locations of each charge are unspecified within this sphere. The net outward electric flux through the spherical surface is
The net outward electric flux is +2.26×1011 Nm²/C.
The electric flux through a closed surface is defined as the product of the electric field and the surface area. It is given by
ΦE=EAcosθ,
where
E is the electric field,
A is the area,
θ is the angle between the area vector and the electric field vector.
When we add up the contributions of all the small areas, we get the net electric flux.
The electric flux through a closed surface is equal to the charge enclosed by the surface divided by the permittivity of free space.
It is given by
ΦE=Qenc/ϵ0,
where
Qenc is the charge enclosed by the surface,
ϵ0 is the permittivity of free space
Since the charges q1 and q2 are both positive, they will both produce outward-pointing electric fields.
The total outward flux through the surface of the sphere is equal to the sum of the fluxes due to each charge.
The net charge enclosed by the surface is
Qenc=q1+q2=+20.0 μC.
The electric flux through the surface of the sphere is therefore given by,
ΦE=Qenc/ϵ0=
+20.0×10−6 C/8.85×10−12 C2/Nm2=+2.26×1011 Nm2/C.
So the net outward electric flux is +2.26×1011 Nm²/C.
Learn more about electric flux:
https://brainly.com/question/26289097
#SPJ11
A force of 1.050×10 3
N pushes a man on a bicycle forward. Air resistance pushes against him with a force of 785 N. If he starts from rest and is on a level road, what speed v will he be going after 40.0 m ? The mass of the bicyclist and his bicycle is 90.0 kg. v=[ An unfortunate astronaut loses his grip during a spacewalk and finds himself floating away from the space station, carrying only a rope and a bag of tools. First he tries to throw a rope to his fellow astronaut, but the rope is too short. In a last ditch effort, the astronaut throws his bag of tools in the direction of his motion, away from the space station. The astronaut has a mass of m a
=113 kg and the bag of tools has a mass of m b
=10.0 kg. If the astronaut is moving away from the space station at v i
=1.80 m/s initially, what is the minimum final speed v b,f
of the bag of tools with respect to the space station that will keep the astronaut from drifting away forever?
The minimum final speed of the bag of tools with respect to the space station that will keep the astronaut from drifting away forever is 20.34 m/s for the forces.
Question 1In the given problem, a man on a bicycle is pushed forward by a force of 1.050 × 10³ N. Air resistance pushes against him with a forces of 785 N. It is given that he starts from rest and is on a level road, and we are to find the speed v he will be going after 40.0 m. The mass of the bicyclist and his bicycle is 90.0 kg.Using Newton's Second Law, we can calculate the net force acting on the man:Net force = F - fwhere F = force pushing the man forwardf = force of air resistanceNet force =[tex](1.050 * 10^3)[/tex] - 785 = [tex]2.65 * 10^2 N[/tex]
Using Newton's Second Law again, we can calculate the acceleration of the man on the bicycle:a = Fnet / ma = (2.65 × [tex]10^2[/tex]) / 90 = 2.94 m/[tex]s^2[/tex]
Now, using one of the kinematic equations, we can find the speed of the man on the bicycle after 40.0 m:v² = v₀² + 2aswhere v₀ = 0 (initial speed) and s = 40 m (distance traveled)
[tex]v^2[/tex] = 0 + 2(2.94)(40) = 235.2v = [tex]\sqrt{232.5}[/tex]= 15.34 m/s
Therefore, the speed the man on the bicycle will be going after 40.0 m is 15.34 m/s.Question 2In the given problem, an astronaut is floating away from a space station, carrying only a rope and a bag of tools. The astronaut tries to throw the rope to his fellow astronaut but the rope is too short. In a last ditch effort, the astronaut throws his bag of tools in the direction of his motion, away from the space station. The astronaut has a mass of ma = 113 kg and the bag of tools has a mass of mb = 10.0 kg.
If the astronaut is moving away from the space station at vi = 1.80 m/s initially, we are to find the minimum final speed vb,f of the bag of tools with respect to the space station that will keep the astronaut from drifting away forever.Using the Law of Conservation of Momentum, we can write:mavi + mbvbi = mava + mbvbafter the astronaut throws the bag of tools, there is no external force acting on the system. Therefore, momentum is conserved. At the start, the momentum of the system is:ma × vi + mb × 0 = (ma + mb) × vafter the bag of tools is thrown, the astronaut and the bag will move in opposite directions with different speeds.
Let the speed of the bag be vb and the speed of the astronaut be va. The momentum of the system after the bag of tools is thrown is:ma × va + mb × vbNow, equating the two equations above, we get:ma × vi = (ma + mb) × va + mb × vbRearranging, we get:vb = (ma × vi - (ma + mb) × va) / mbSubstituting the given values, we get:vb = (113 × 1.80 - (113 + 10) × 0) / 10vb = 20.34 m/s
Therefore, the minimum final speed of the bag of tools with respect to the space station that will keep the astronaut from drifting away forever is 20.34 m/s.
Learn more about forces here:
https://brainly.com/question/13191643
#SPJ11
A planet is in an elliptical orbit around a sun. Which statement below is true about the torque on the planet due to the sun? Since the force on the planet points along its direction of motion, the torque on it is always positive. Since the gravitational force on the planet passes through its axis of rotation, there is no torque generated by this force. Since the force on the planet changes as it moves around its orbit, the torque on it is not constant. O None of these choices is correct. Imagine propping up a ladder against a wall. Which of the following is an essential condition for the ladder to be in static equilibrium? The ladder must lean at an angle greater than 45 degrees. The ground can be frictionless. The vertical wall must be very rough. None of these choices is correct. If the speed with which a fluid flows is V and the cross-sectional area of the stream is A, then what does the quantity (AV) signify? The volume of the fluid flowing per unit area. The total mass of the fluid. None of these choices is correct. The mass of the fluid flowing per unit volume. Can water evaporate at 10°C? Why, or why not? Yes, because a small fraction of water molecules will be moving fast enough to break free and enter vapor phase even at 10°C. O No, because 10°C is too far below the boiling point of water. Yes, because 10°C is well above the evaporating point of water. No, because evaporation at 10°C requires a much higher pressure. 0 0 O
Regarding the torque on a planet in an elliptical orbit around a sun, the correct statement is: None of these choices is correct. The torque on the planet due to the sun is not determined solely by the direction of the force or the alignment of the gravitational force with the axis of rotation.
In an elliptical orbit, the force on the planet from the sun is not always along its direction of motion. As the planet moves in its elliptical path, the force vector changes its direction, resulting in a varying torque on the planet. Therefore, none of the given choices accurately describes the torque on the planet.
When propping up a ladder against a wall, an essential condition for the ladder to be in static equilibrium is that the ground cannot be frictionless. Friction between the ladder and the ground is necessary to prevent the ladder from sliding or rotating. If the ground were completely frictionless, the ladder would not be able to maintain a stable position against the wall.
The quantity (AV), where V is the speed of fluid flow and A is the cross-sectional area of the stream, represents the volume of the fluid flowing per unit time. Multiplying the velocity by the cross-sectional area gives the volume of fluid passing through that area in a given time interval.
Water cannot evaporate at 10°C because 10°C is too far below the boiling point of water. Evaporation occurs when molecules at the surface of a liquid gain enough energy to transition into the vapor phase. While some water molecules will possess sufficient kinetic energy to evaporate even at temperatures below the boiling point, the rate of evaporation is much lower compared to higher temperatures. At 10°C, the average kinetic energy of water molecules is not high enough for a significant number of molecules to escape into the vapor phase. Thus, water does not readily evaporate at 10°C.
Learn more about torque here:
https://brainly.com/question/30338175
#SPJ11
you are riding a Ferris Wheel with a diameter of 19.3 m. You count the time it takes to go all the way around to be 38 s. How fast (in m/s) are you moving?
Round your answer to two (2) decimal places.
The speed (in m/s) of the Ferris wheel is 1.59.
The circumference of the Ferris wheel is given by the formula 2πr where r is the radius of the Ferris wheel.Calculation of the radius isR = d/2R = 19.3/2R = 9.65 m
The circumference can be given byC = 2πrC = 2 * 3.14 * 9.65C = 60.47 mNow the time taken to move around the Ferris wheel is given as 38 s.Now the speed of the Ferris wheel can be given asSpeed = distance/timeSpeed = 60.47/38Speed = 1.59 m/s.
Therefore, the speed (in m/s) of the Ferris wheel is 1.59.
Learn more about radius here,
https://brainly.com/question/27696929
#SPJ11
This question is about eclipses. If the Moon is: 1) precisely at conjunction with the Sun (as close to the Sun on the sky as it will get this month) and 2) is at one of the nodes of its orbit (currently crossing the ecliptic plane) and 3 ) is near its apogee point (furthest from the Earth in its orbit) what type of eclipse could you see? Choose one: A. an annular solar eclipse B. a total solar eclipse C. a partial lunar eclipse D. a total lunar eclipse E. no type of eclipse is possible under the conditions given This question is about eclipses. If the Moon is: 1) in its first quarter phase (90 degrees east of the Sun along the ecliptic) 2) is at one of the nodes of its orbit (currently crossing the ecliptic plane) and 3) is near its perigee point (closest to the Earth in its orbit) what type of eclipse could you see? Choose one: A. an annular solar eclipse B. a total solar eclipse C. a partial lunar eclipse D. a total lunar eclipse E. no type of eclipse is possible under the conditions given
The type of eclipse that would be visible if the Moon is precisely at conjunction with the Sun (as close to the Sun on the sky as it will get this month) and is at one of the nodes of its orbit (currently crossing the ecliptic plane) .
It is near its apogee point (furthest from the Earth in its orbit) is an annular solar eclipse.
The type of eclipse that would be visible if the Moon is in its first quarter phase (90 degrees east of the Sun along the ecliptic) is at one of the nodes of its orbit (currently crossing the ecliptic plane) and is near its perigee point (closest to the Earth in its orbit) is a partial lunar eclipse.
An eclipse is a phenomenon that occurs when one celestial body passes in front of another and blocks the view of the other from a third celestial body. The Moon and the Sun's movements and positions determine whether we see a solar or lunar eclipse. A solar eclipse occurs when the Moon passes between the Sun and the Earth, blocking the Sun's light and casting a shadow on the Earth.
On the other hand, a lunar eclipse occurs when the Earth passes between the Sun and the Moon, casting a shadow on the Moon.There are different types of eclipses, and they depend on the positions of the celestial bodies at the time of the eclipse. For example, if the Moon is precisely at conjunction with the Sun, is at one of the nodes of its orbit, and is near its apogee point, an annular solar eclipse is visible. An annular solar eclipse is a type of solar eclipse that happens when the Moon's apparent size is smaller than that of the Sun.
As a result, the Sun appears as a bright ring, or annulus, surrounding the Moon's dark disk.A partial lunar eclipse occurs when the Earth passes between the Sun and the Moon, but the Moon does not pass through the Earth's shadow completely. Instead, only a part of the Moon passes through the Earth's shadow, resulting in a partial lunar eclipse.
Thus, the type of eclipse that would be visible if the Moon is precisely at conjunction with the Sun (as close to the Sun on the sky as it will get this month) and is at one of the nodes of its orbit (currently crossing the ecliptic plane) and is near its apogee point (furthest from the Earth in its orbit) is an annular solar eclipse. Similarly, the type of eclipse that would be visible if the Moon is in its first quarter phase (90 degrees east of the Sun along the ecliptic) is at one of the nodes of its orbit (currently crossing the ecliptic plane) and is near its perigee point (closest to the Earth in its orbit) is a partial lunar eclipse.
To know more about solar eclipse :
brainly.com/question/4702388
#SPJ11
Required information Photoelectric effect is observed on two metal surfaces, Light of wavelength 300.0 nm is incident on a metal that has a work function of 210 ev. What is the maximum speed of the emitted electrons? m/s
The photoelectric effect is defined as the ejection of electrons from a metal surface when light is shone on it. The maximum kinetic energy of the photoelectrons is determined by the work function (Φ) of the metal and the energy of the incident photon. The energy of a photon is given by E = hc/λ, where h is Planck's constant, c is the speed of light, and λ is the wavelength of the light. The maximum kinetic energy of the photoelectrons is given by KEmax = E - Φ.
In this case, the work function of the metal is given as 210 eV, and the wavelength of the light is 300.0 nm or 3.0 × 10-7 m. The energy of the photon is calculated as:
E = hc/λ
= (6.626 × 10-34 J s) × (2.998 × 108 m/s) / (3.0 × 10-7 m)
= 6.63 × 10-19 J
The maximum kinetic energy of the photoelectrons is calculated as:
KE max = E - Φ= (6.63 × 10-19 J) - (210 eV × 1.602 × 10-19 J/eV)
= 0.63 × 10-18 J
The maximum speed of the emitted electrons is given by:
vmax = √(2KEmax/m)
= √(2 × 0.63 × 10-18 J / 9.109 × 10-31 kg)
= 1.92 × 106 m/s
Therefore, the maximum speed of the emitted electrons is 1.92 × 106 m/s.
Learn more about photoelectric effect here
https://brainly.com/question/1359033
#SPJ11
A ball with a mass of 38kg travels to the right with a velocity of 38m/s. It collides with a larger ball with a mass of 43kg, traveling in the opposite direction with a velocity of -43m/s. After the collision, the larger mass moves off to the right with a velocity of 33m/s. What is the velocity of the smaller mass after the collision?
Note: Don't forget the units!
The velocity of the smaller mass after the collision is -22.19 m/s, as calculated after applying the law of conservation of momentum.
Given, Mass of the smaller ball (m₁) = 38 kg. Velocity of the smaller ball (u₁) = 38 m/s, Mass of the larger ball (m₂) = 43 kg, Velocity of the larger ball (u₂) = -43 m/s, Velocity of the larger ball after collision (v₂) = 33 m/s. Let v₁ be the velocity of the smaller ball after the collision. According to the law of conservation of momentum, the momentum before the collision is equal to the momentum after the collision (provided there are no external forces acting on the system).
Mathematically, P₁ = P₂, Where, P₁ = m₁u₁ + m₂u₂ is the total momentum before the collision. P₂ = m₁v₁ + m₂v₂ is the total momentum after the collision. Substituting the given values, we get;38 × 38 + 43 × (-43) = 38v₁ + 43 × 33Simplifying the above expression, we get: v₁ = -22.19 m/s. Therefore, the velocity of the smaller mass after the collision is -22.19 m/s. (note that the negative sign indicates that the ball is moving in the left direction.)
Learn more about law of conservation of momentum:
https://brainly.com/question/7538238
#SPJ11
A boy sitting in a tree launches a rock with a mass 75 g straight up using a slingshot. The initial speed of the rock is 8.0 m/s and the boy, is 4.0 meters above the ground. The rock rises to a maximum height, and then falls to the ground. USE ENERGY CONSERVATIONTO SOLVE ALL OF THIS PROBLEM (20pts) a) Model the slingshot as acting. like a spring. If, during the launch, the boy pulls the slingshot back 0.8 m from its unstressed position, what must the spring constant of the slingshot be to achieve the 8.0 m/s launch speed? b) How high does the rock rise above the ground at its highest point? c) How fast is the rock moving when it reaches the ground? (assuming no air friction) If, due to air friction, the rock falls from the height calculated in Part b and actually strikes the ground with a velocity of 10 m/s, what is the magnitude of the (nonconservative) force due to air friction?
a) spring constant is approximately 3.7 N/m. b) height is approximately 1.1 m. c) The magnitude of the (nonconservative) force due to air friction when the rock hits the ground is approximately 0.32 N.
a)Model the slingshot as acting like a spring. If during the launch, the boy pulls the slingshot back 0.8 m from its unstressed position, the spring constant of the slingshot required to achieve the 8.0 m/s launch speed can be calculated as follows:Given: mass of the rock = 75 g = 0.075 kgInitial velocity of the rock = 8.0 m/s
Distance the boy pulls back the slingshot = 0.8 mThe net force acting on the rock as it moves from the unstressed position to its maximum displacement can be determined using Hooke's law:F = -kxHere,x = 0.8 mis the displacement of the spring from the unstressed position, andF = ma, wherea = acceleration = Δv/Δt
We know that the time for which the rock stays in contact with the slingshot is the time it takes for the spring to go from maximum compression to maximum extension, so it can be written as:Δt = 2t
Since the final velocity of the rock is 0, the displacement of the rock from maximum compression to maximum extension equals the maximum height the rock reaches above the ground. Using the principle of energy conservation, we can calculate this maximum height.
b)The maximum height the rock reaches above the ground can be calculated as follows:At the highest point, the velocity of the rock is 0, so we can use the principle of conservation of energy to calculate the maximum height of the rock above the ground.
c)The final velocity of the rock when it hits the ground can be calculated using the equation:[tex]vf^2 = vi^2 + 2ad[/tex]
wherevf = final velocity of the rock = 10 m/svi = initial velocity of the rock = -4.91 m/sd = displacement of the rock = 6.13 m
a) The spring constant of the slingshot required to achieve the 8.0 m/s launch speed is approximately 3.7 N/m.
b) The maximum height the rock reaches above the ground is approximately 1.1 m.
c) The magnitude of the (nonconservative) force due to air friction when the rock hits the ground is approximately 0.32 N.
Learn more about friction here:
https://brainly.com/question/28356847
#SPJ11