which was an assumption bohr made in his model? select the correct answer below: wavelengths have negative values. energy values were quantized. neutrons are negatively charged. electrons are found in the nucleus.

The balanced equation for the reaction is:

4Fe + 3O2 -> 2Fe2O3

We are given the mass of oxygen and the mass of iron oxide produced. To find the mass of iron used in the reaction, we need to use stoichiometry to relate the masses of the reactants and products.

First, we can calculate the molar mass of Fe2O3:

Fe2O3 = 2(55.845 g/mol) + 3(16.00 g/mol) = 159.69 g/mol

Next, we can use the mass of iron oxide produced to find the number of moles of Fe2O3:

63.84 g Fe2O3 × (1 mol Fe2O3/159.69 g Fe2O3) = 0.400 mol Fe2O3

Since the reaction produces 2 moles of Fe2O3 for every 4 moles of Fe, we can find the number of moles of Fe:

0.400 mol Fe2O3 × (4 mol Fe / 2 mol Fe2O3) = 0.800 mol Fe

Finally, we can use the molar mass of Fe to convert the number of moles to grams:

0.800 mol Fe × 55.845 g/mol = 44.68 g Fe

Therefore, 44.68 grams of iron were used in the reaction.

The substance with a pH that is lower than bleach but higher than egg whites would have a pH between 8 and 12.

pH is a measure of the acidity or basicity (alkalinity) of a solution. It is measured on a scale from 0 to 14, with a pH of 7 considered neutral. pH values below 7 indicate acidity, while pH values above 7 indicate basicity.

Household bleach has a pH of around 12-13, while egg whites have a pH of around 7-8. Therefore, the substance with a pH that is lower than bleach but higher than egg whites would have a pH between 8 and 12.

Substances with a pH in this range include baking soda (pH around 9), milk of magnesia (pH around 10), and ammonia solution (pH around 11). However, without further information, it is impossible to determine the exact substance with certainty.

Learn more about pH here: https://brainly.com/question/26424076

#SPJ1

The statement "the strongest intermolecular forces are nearly as strong as the forces that hold atoms together in a molecule" is a false statement. The forces that hold atoms together within a molecule are primarily chemical bonds that are incredibly powerful forces.

Intermolecular forces are the forces of attraction and repulsion between different molecules or particles. In contrast, intramolecular forces refer to the forces that hold atoms together within a molecule.

There are three main types of intermolecular forces:

These forces are considerably weaker.

The forces that hold atoms together within a molecule are primarily chemical bonds that are incredibly powerful forces. The forces of chemical bonds involve the sharing or transfer of electrons between atoms. Covalent bonds, ionic bonds, and metallic bonds are examples of chemical bonds that hold atoms together in molecules. These bonds are so strong that they are difficult to break.

To learn more about intermolecular forces refer - https://brainly.com/question/20162721

#SPJ11

The chemical equation for the ion pairing of Sr2+ (aq) and C2O42- (aq) leading to their soluble ion pair is given by the following chemical equation: Sr2+ (aq) + C2O42- (aq) ⇌ SrC2O4 (s).

Here, Sr2+ (aq) is an aqueous solution of strontium ions and C2O42- (aq) is an aqueous solution of oxalate ions. When these two solutions are mixed, they undergo a reaction to form a precipitate of strontium oxalate (SrC2O4) which is a soluble ion pair.

The reaction is reversible because the soluble ion pair can dissociate into its constituent ions under certain conditions. The solubility of the ion pair is determined by the equilibrium constant (Ksp) of the reaction which is given by the following equation: Ksp = [Sr2+][C2O42-] where [Sr2+] and [C2O42-] are the concentrations of strontium ions and oxalate ions in the solution, respectively.

Thus, the chemical equation for the ion pairing of Sr2+ (aq) and C2O42- (aq) leading to their soluble ion pair is: Sr2+ (aq) + C2O42- (aq) ⇌ SrC2O4 (s).

Read more about reaction;

https://brainly.com/question/24795637

#SPJ11

The volume (in liters) in which 9.87 moles of ozone, O₃ can occupy is 221.09 liters

From the question given above, the following data were obtained:

The volume of 9.87 moles of ozone, O₃ can be obtained as illustrated below:

From the ideal gas theory, we understood that:

1 mole of ozone, O₃ = 22.4 Liters

Therefore,

9.87 moles of ozone, O₃ = (9.87 moles × 22.4 Liters) / 1 mole

9.87 moles of ozone, O₃ = 221.09 liters

Thus, we can conclude that the volume is 221.09 liters

Learn more about volume:

https://brainly.com/question/225322

#SPJ1

a. The number of moles of acid in the original sample is 0.00369. b. The molar mass of the organic acid is 0.135  M. c. The molarity of the unreacted HA remaining in the solution at pH 5.65 is 0.045 M

Calculation:

a. The equivalence point was reached after the addition of 27.4 mL of the 0.135 M NaOH.a.

Moles of NaOH = M × V = 0.135 M × 27.4 mL = 0.00369 moles

Using the balanced equation, we find that the number of moles of HA is equal to the number of moles of NaOH at the equivalence point. HA + NaOH → NaA + HOH0. 00369 moles of NaOH are needed to react with 0.00369 moles of HA.

b. Molar mass of HA = (mass of HA) / (number of moles of HA) = 0.682 g / 0.00369 moles = 184.7 g/molc. Calculate the molarity of the unreacted HA remaining in the solution at pH = 5.65.The pH of the solution was 5.65 after 10.6 mL of NaOH were added.

c. To calculate the molarity of the remaining HA, we first need to find the pKa of the acid.

pH = pKa + log([A-]/[HA])5.65 = pKa + log([A-]/[HA]). We know that at the equivalence point, [A-] = [HA] / 2.

Therefore,[A-] = 0.00369 moles / 2 = 0.00185 moles[Ligand] = (moles of ligand) / (liters of solution). We need to find [HA] in moles/L, so we need to find [A-] in moles/L. We can use the molarity of the NaOH solution to do this. [NaOH] = 0.135 M

moles of NaOH = [NaOH] × (liters of solution)moles of NaOH = 0.135 M × 0.0106 L.

moles of NaOH = 0.00144 moles

moles of HA at pH = 5.65 = moles of HA initially - moles of NaOH added = 0.00369 moles - 0.00144 moles

= 0.00225 moles[HA] = 0.00225 moles / 0.050 L = 0.045 M

To know more about molarity, refer here:

https://brainly.com/question/17238709#

#SPJ11

Answer: a) The identity of element X is Xenon. b) There are 83 neutrons in element X.

In order to identify the element X, let's first find its atomic number. The number of electrons in the neutral atom is equivalent to the atomic number of the particular element. The ion of element X has a total of 54 electrons, so X has 54 protons, implying that X's atomic number is 54. The atomic number of a chemical element is the number of protons in its atomic nucleus.

b) The number of neutrons in an atom is equal to the mass number minus the atomic number of the element. Thus, the number of neutrons in element X can be determined by subtracting 54 from 137, which gives 83 neutrons inside atom of elements.

Know more about Xenon here:

https://brainly.com/question/5516586

#SPJ11

Answer: Tetracycline is an antibiotic containing multiple functional groups, including an amine group, an alcohol group, a carboxylic acid group, and a ketone group.

Tetracycline is an antibiotic containing multiple functional groups. The functional groups present in this molecule are an amine group, an alcohol group, a carboxylic acid group, and a ketone group.

The amine group is composed of nitrogen and hydrogen atoms, and is often found in organic compounds. It is also known as an amino group.

The alcohol group is composed of an oxygen and hydrogen atom bonded to a hydrocarbon group, usually a single bond. It is also known as a hydroxyl group.

The carboxylic acid group is composed of a carbonyl and hydroxyl groups, and is often found in organic compounds. It is also known as an carboxyl group.

The ketone group is composed of two oxygen atoms and two carbon atoms, and is often found in organic compounds. It is also known as a keto group.

In conclusion, tetracycline is an antibiotic containing multiple functional groups, including an amine group, an alcohol group, a carboxylic acid group, and a ketone group.

Learn more about antibiotic here:

https://brainly.com/question/30012458#



#SPJ11

The molality of a solution that contain 90. 0g of benzoic acid in 350 ml of water is 2.102 mole / kg.

The molarity of a solution is defined as the number of moles of solute dissolved in one liter of solution. Molarity can be expressed as the ratio of a solvent's moles to a solution's total liters. Both the solute and the solvent are part of the solution in calculating the molarity. It is the ratio of the solute moles to the solvent kilograms.

Molarity = Number of moles of solute Volume of solution in liter.

moles of C6H5COOH = 90.0 g / 122.12g/mole

                                     = 0.736 mole

Now we have to calculate the mass of water.

            = (350 ml) (1 g/ml) * 1L/ 1000ml

            = 0.350 kg

Molarity =  0.736 mole/  0.350 kg

             = 2.102 mole / kg.

To learn more about Molarity

https://brainly.com/question/30404105

#SPJ4

The original pressure of gas is 4 atm for given volume of 30 liters . This is taken out by boyle law.

Boyle's law is an experimental gas law that specifies the relationship between pressure and volume of a confined gas. It is also known as the Boyle-Mariotte law or Mariotte's law (particularly in France). Boyle's law states that the absolute pressure exerted by a given mass of an ideal gas is inversely proportional to the volume it occupies within a closed system if the temperature and amount of gas remain constant.According to Boyle's Law, while the temperature of a given mass of confined gas remains constant, the product of its pressure and volume remains constant as well. When comparing the same substance under two sets of conditions

To know more about boyle law , visit ;

brainly.com/question/30367067

#SPJ1

The statement that "when two solutions containing ions as solutes are combined and a reaction occurs, it is always a single-replacement reaction" is False.

When two solutions containing ions as solutes are combined and a reaction occurs, it is not always a single-replacement reaction.

The type of reaction that will occur depends on the reactants and the conditions of the reaction.

For example, if two solutions containing different metal ions are mixed together, a double-replacement reaction may occur, in which two ionic compounds are formed.

Similarly, a precipitation reaction may occur if the combination of the two solutions produces an insoluble product.

In general, single-replacement reactions involve one element replacing another element in a compound, and occur when one of the reactants is an elemental solid, such as a metal.

To know more about solutes, refer here:

https://brainly.com/question/7932885#

#SPJ11

The number of unique sets of 4 quantum numbers to represent the electrons in the 4f subshell is 70.

The four quantum numbers that make up an electron's set are the:

(i) principal quantum number (n)

(ii) angular momentum quantum number (l)

(iii) magnetic quantum number (m_l)

(iv) spin quantum number (m_s).

Each of these electrons has a limited range of the above numbers in their respective shell.

The principal quantum number for all the electrons in the 4f subshell is 4.

The angular momentum quantum number has a value of 3 corresponding to the f subshell.

The magnetic quantum number has a range of -3 through +3 for the electrons in the f subshell.

The spin quantum number has a range of -1/2 or +1/2.

Even if the principal quantum number and angular momentum quantum number are the same for all the electrons, the other two factors contribute to each electron having a unique set of quantum numbers.

Therefore, when these four quantum numbers are combined, they make up 70 unique sets of 4 quantum numbers that can be used to represent the electrons in the 4f subshell, in accordance with the Pauli Exclusion Principle.

To know more about quantum numbers, refer here:

https://brainly.com/question/16977590#

#SPJ11

A group 2A metal will form a stable ion with a charge of +2. Examples of group 2A metals include magnesium (Mg), calcium (Ca), and strontium (Sr).

A group 3A metal will form a stable ion with a charge of +3. Examples of group 3A metals include boron (B), aluminum (Al), and gallium (Ga).

For more questions like charge visit the link below:

1. A metal of group 2A, plus

2. A metal from group 3A, - 3+

A What is charge?

Both positive and negative charges are possible. We are aware that a positive charge is created when a species has more protons than electrons. A negative ion, on the other hand, is one that has more electrons than protons.

We now understand that metals mostly produce positive ions. The group that the metal belongs to in the periodic table determines how much charge is on the ions.

The ions' charges are as follows:

1. A metal of group 2A, plus

2. A metal from group 3A, - 3+

https://brainly.com/question/28531714

#SPJ11

The correct way to write the formula of the compound formed by a hydrogen ion and a sulfate ion is c. h2so4.

A compound is a pure substance composed of two or more different atoms chemically bonded in a fixed proportion. The atoms in a compound can be combined in a range of methods and in various ratios. When atoms of two or more elements chemically combine, they form a compound.

The hydrogen ion or proton has a chemical symbol of H+. Chemical formula of sulfate ion. The chemical formula for sulfate ion is SO42-. Formula of the compound formed by a hydrogen ion and a sulfate ion. The formula of the compound formed by a hydrogen ion and a sulfate ion is h2so4.

Learn more about proton at:

https://brainly.com/question/1264222

#SPJ11

The mass percent of hydrogen in sodium bicarbonate (NaHCO3) is 1.20% (to the hundredths place).

To determine the mass percent of hydrogen (H) in sodium bicarbonate (NaHCO3), we need to first calculate the molar mass of NaHCO3, which is:

NaHCO3 = 1(Na) + 1(H) + 1(C) + 3(O)

= 23.00 + 1.01 + 12.01 + (3 x 16.00)

= 84.01 g/mol

The mass of hydrogen in one mole of NaHCO3 is 1.01 g, since there is only one hydrogen atom in each molecule of NaHCO3.

Therefore, the mass percent of hydrogen in NaHCO3 can be calculated as follows:

mass percent H = (mass of H / mass of NaHCO3) x 100%

= (1.01 g / 84.01 g) x 100%

= 1.20%

For more question on sodium bicarbonate click on

https://brainly.com/question/1596599

#SPJ11

2.69 M of NH4Cl must be added to the solution to create a buffer with a final pH of 9.

A buffer solution is a solution that resists changes in pH when small quantities of an acid or base are added to it. A buffer solution is a solution that can resist changes in pH when acid or base is added to it.

The Henderson-Hasselbalch equation, which relates the pH of a buffer solution to the dissociation equilibrium constant of the weak acid, may be used to determine the pH of a buffer solution. Pka and pH can be used to derive the Henderson-Hasselbalch equation, which is as follows: pH = pKa + log([A-]/[HA]). Here, [A-] is the concentration of conjugate base, and [HA] is the concentration of weak acid. A buffer solution is created by combining a weak acid with its corresponding conjugate base, or a weak base with its corresponding conjugate acid.

When a buffer solution is formed from a weak acid and its conjugate base, it is referred to as an acidic buffer. A buffer solution made up of a weak base and its corresponding conjugate acid is known as a basic buffer. The final pH of a buffer solution is determined by the ratio of the weak acid or base to the conjugate base or acid, as determined by the Henderson-Hasselbalch equation.

pH can be calculated using the following equation: pH = pKa + log([A-]/[HA]). The NH3-NH4+ buffer is commonly used in laboratories. It is made up of ammonia (NH3) and ammonium (NH4+) in a specific ratio. NH3 is a weak base with a Kb value of 1.8 × 10−5, while NH4+ is its conjugate acid, and its Ka value is 5.6 × 10−10.In this problem, we must determine the concentration of NH4Cl required to create a buffer solution with a final pH of 9. Using the Henderson-Hasselbalch equation: pH = pKa + log([A-]/[HA]). Since the solution is 0.30 M in NH3, we know that the [A-] is 0.30 M. We must now figure out what the [HA] is to calculate the concentration of NH4Cl necessary. pH can be rearranged in the following manner: pH = pKa + log([A-]/[HA])pH - pKa = log([A-]/[HA])10^(pH - pKa) = [A-]/[HA]. We can find pKa using the Kb value of NH3: Kw = Ka × Kb = 1 × 10^-14 = 5.6 × 10^-10 × 1.8 × 10^-5Ka = 5.6 × 10^-10 / 1.8 × 10^-5 = 3.11 × 10^-6pKa = -log(Ka) = 5.51. Now, we can calculate [HA] using the following equation: [A-]/[HA] = 10^(pH - pKa) = 10^(9 - 5.51) = 0.0301. Thus, the ratio of [A-]/[HA] is 0.30/0.0301 = 9.97.

This implies that we must add NH4Cl to the solution in order to create an ammonium/ammonia buffer with a ratio of 9.97:1. To achieve this ratio, we must add NH4Cl in such a way that the [NH4+] is 9.97 times higher than the [NH3]. Assuming that the volume of the solution is 1 L, the [NH3] is 0.30 M, and the desired ratio is 9.97:1, we can compute the [NH4+] that will be necessary:[NH4+] = [NH3] × ratio = 0.30 M × 9.97 = 2.99 M. We can now calculate the amount of NH4Cl that must be added to the solution using the following equation:2.99 M - 0.30 M = 2.69 M. Therefore, 2.69 M of NH4Cl must be added to the solution to create a buffer with a final pH of 9.

To know more about buffer click here:

https://brainly.com/question/19093015

#SPJ11

On the basis of the information in the chart and what you know about atomic structure, the elements that form stable but reactive diatomic gases are hydrogen, nitrogen, oxygen, and fluorine.

A diatomic element is an element that can form two-atom molecules. The diatomic elements' covalent bonds keep these molecules together. The prefix "di-" in "diatomic" indicates two and diatomic gases, or simply diatomics, are gases consisting of molecules with two atoms of the same or different chemical elements in their molecule.

The four most well-known diatomic elements are hydrogen (H2), nitrogen (N2), oxygen (O2), and fluorine (F2). The general formula for diatomic molecules is X2, where X represents an element. Some other examples include chlorine (Cl2), bromine (Br2), and iodine (I2). A stable but reactive diatomic gas is a diatomic gas that is chemically stable enough to exist as a molecule but is chemically reactive. These diatomic gases usually do not react spontaneously or violently, but they may react with other chemicals under the proper conditions.

Learn more about covalent bonds at:

https://brainly.com/question/11674395

#SPJ11

When 2-bromohexane is treated with a strong base the alkenes that would result is given as 1

When 2-bromohexane is treated with a strong base, such as sodium ethoxide (NaOEt) or sodium hydroxide (NaOH), it undergoes elimination reaction (also called dehydrohalogenation) to form different alkenes.

The product(s) of the reaction depend on the position of the β-carbon (the carbon next to the bromine atom) that undergoes deprotonation. Since there are two β-carbons in 2-bromohexane, two different alkenes can be formed.

Read more on alkenes here:https://brainly.com/question/29120960

#SPJ1

74.3 mililiters of 11.5 M HCl (aq) is required to prepare 855.0 mL of 1.00 M HCl (aq).

To calculate how many milliliters of 11.5 M HCl (aq) are required to prepare 855.0 mL of 1.00 M HCl (aq), we will utilize the dilution formula.

The formula for dilution is:

C₁V₁ = C₂V₂

Where:

C₁ = initial concentration

V₁ = initial volume

C₂ = final concentration

V₂ = final volumeIn this case

C₁ = 11.5 M

V₁ = ?

C₂ = 1.00 M

V₂ = 855.0 mL

Firstly, let's rearrange the formula and solve for V₁ by substituting the given values. We will then calculate the value of V₁:

C₁V₁ = C₂V₂

11.5 M V₁ = 1.00 M × 0.855 L

V₁ = 1.00 M × 0.855 L / 11.5 M = 0.07434 l or 74.34 ml

learn more about dilution

https://brainly.com/question/27097060

#SPJ11

Answer : When 3.2 moles of iron (III) oxide and 2.3 moles of carbon monoxide react, 2 moles of iron metal are produced.

2 moles of iron metal are produced when 3.2 moles of iron (III) oxide (Fe2O3) and 2.3 moles of carbon monoxide (CO) react. The balanced chemical equation for this reaction is: Fe2O3 + 3CO --> 2Fe + 3CO2.

This reaction is a combustion reaction, meaning it involves the oxidation of iron (III) oxide by the carbon monoxide. Oxygen from the iron oxide is released as carbon dioxide (CO2) and the iron is left in the reduced form, or elemental iron (Fe).

To calculate the moles of iron metal produced, the mole ratio of Fe2O3 to Fe must be determined. From the balanced equation, it can be seen that for every 1 mole of Fe2O3, 2 moles of Fe are produced. Therefore, to calculate the number of moles of Fe, multiply the number of moles of Fe2O3 by 2. In this case, that would be 3.2 moles of Fe2O3 x 2 = 6.4 moles of Fe.

Finally, to get the number of moles of Fe metal produced, subtract the number of moles of Fe2O3 from the number of moles of Fe. In this case, 6.4 moles of Fe - 3.2 moles of Fe2O3 = 2 moles of Fe metal.

Know more about  iron (III) oxide here:

https://brainly.com/question/19392610

#SPJ11

The correct answer for the given question is option B strong analgesic.

What is nitrous oxide ?

Nitrous oxide, also known as laughing gas, is a colorless, slightly sweet-smelling gas with the chemical formula N2O. It is a naturally occurring compound that can be synthesized for various uses, including medical and dental procedures, as well as for use as a propellant in whipped cream dispensers and racing cars.

Nitrous oxide is a weak anesthetic, meaning it does not provide complete loss of consciousness but can help reduce anxiety and pain during medical procedures. It is commonly used in combination with other anesthetics, such as oxygen or intravenous sedatives, to achieve a deeper level of anesthesia.

Nitrous oxide is a weak anesthetic and does not provide strong analgesia, but it does have some analgesic properties. It also has strong amnesic effects, meaning that patients may not remember the procedure after it is completed. However, it generally does not cause respiratory depression unless used in very high concentrations.

To know more about respiration visit :-

https://brainly.com/question/22673336

#SPJ1

The number of alkenes formed depends on the position of the bromine and the methyl group on the carbon chain.

An alkene is described as a hydrocarbon containing a carbon–carbon double bond and often used as synonym of olefin, that is, any hydrocarbon containing one or more double bonds.

When 3-bromo-3-methylheptane is treated with a strong base, an elimination reaction occurs, resulting in the formation of alkenes.

The elimination reaction happens by removing a proton from a beta-carbon (i.e., a carbon adjacent to the carbon bearing the bromine atom) and the bromine atom to form an alkene.

Learn more about alkenes at: https://brainly.com/question/24270289

#SPJ1

The balanced equation for the redox reaction when Al metal reacts with HCl is 2Al + 6HCl -> 2[tex]AlCl_{3}[/tex] + 3[tex]H_{2}[/tex].

To balance the redox equation for the reaction between aluminum metal and hydrochloric acid using the electron transfer method, follow these steps:

Step 1: Write the unbalanced equation:
Al + HCl -> [tex]AlCl_{3}[/tex] + [tex]H_{2}[/tex]

Step 2: Separate the equation into half-reactions:
Oxidation half-reaction: Al -> [tex]Al^{3+}[/tex]
Reduction half-reaction: [tex]H^{+}[/tex] -> [tex]H_{2}[/tex]

Step 3: Balance the atoms in each half-reaction, except for oxygen and hydrogen:
Oxidation half-reaction: Al ->  [tex]Al^{3+}[/tex] (already balanced)
Reduction half-reaction: 2[tex]H^{+}[/tex] -> [tex]H_{2}[/tex]

Step 4: Balance the charges in each half-reaction by adding electrons:
Oxidation half-reaction: Al -> [tex]Al^{3+}[/tex] + 3[tex]e^{-}[/tex]
Reduction half-reaction: 2[tex]H^{+}[/tex] + 2[tex]e^{-}[/tex] -> [tex]H_{2}[/tex]

Step 5: Equalize the number of electrons transferred in both half-reactions by multiplying the half-reactions by appropriate factors:
Oxidation half-reaction: 2(Al -> [tex]Al^{3+}[/tex] + 3[tex]e^{-}[/tex] ) -> 2Al -> 2[tex]Al^{3+}[/tex]  + 6[tex]e^{-}[/tex]
Reduction half-reaction: 3(2[tex]H^{+}[/tex]  + 2[tex]e^{-}[/tex] -> H2) -> 6[tex]H^{+}[/tex]  + 6[tex]e^{-}[/tex] -> [tex]H_{2}[/tex]

Step 6: Add the balanced half-reactions back together:
2Al + 6[tex]H^{+}[/tex] -> 2[tex]Al^{3+}[/tex] + 3[tex]H_{2}[/tex]

Step 7: Add back the spectator ions (chloride ions) to complete the balanced equation:
2Al + 6HCl -> 2[tex]AlCl_{3}[/tex] + 3[tex]H_{2}[/tex]

The balanced redox equation using the electron transfer method is:
2Al + 6HCl -> 2[tex]AlCl_{3}[/tex] + 3[tex]H_{2}[/tex]

To know more about Electron Transfer Method:

https://brainly.com/question/30897672

#SPJ11

The mass % of the solution if the density of the solution is 1.06 g/ml is 10.51%

The mass of NaI = 99.7 g

Volume of the solution = 895 ml

Density of the solution = 1.06 g/ml

To calculate the mass % of the solution, we have to calculate the mass of the solution first.

Step-by-step explanation:

The formula for density is given by:

Density = Mass/Volume

Or,

Mass = Density × Volume

Now, we will calculate the mass of the solution.

Mass = Density × Volume

        = 1.06 × 895= 948.7 g

Now, we will calculate the mass % of the solution.

Mass % = (Mass of solute/Total mass of solution) × 100

Mass of solute = 99.7 g

Total mass of solution = 948.7 g

Mass % = (99.7/948.7) × 100

             = 10.51%

Therefore, the mass % of the solution is 10.51%.

Learn more about mass %: https://brainly.com/question/26150306

#SPJ11

The theoretical yield was 6.64 g

To calculate the theoretical yield of a reaction, we need to use the percent yield formula and rearrange it to solve for the theoretical yield. The percent yield is defined as:

percent yield = (actual yield / theoretical yield) x 100%

Rearranging this equation, we can solve for the theoretical yield:

theoretical yield = actual yield / (percent yield/100%)

Plugging in the given values, we get:

theoretical yield = 5.6 g / (84.3%/100%)

theoretical yield = 6.64 g

Therefore, the theoretical yield of the reaction was 6.64 g.

To learn more about percent yield refer - https://brainly.com/question/11963853

#SPJ11

To dilute 45.0 ml of a 1.20 M solution of NaBr to a 0.0400 M solution, you need to add enough water to a total volume of 226.25 ml.

The dilution formula is M1V1 = M2V2, where M1 and V1 are the initial molarity and volume of the solution and M2 and V2 are the desired molarity and volume of the dilute solution.

Calculate V2 (the desired volume) by rearranging the equation and solving for V2: V2 = (M1V1) / M2.

V2 = (1.20M * 45.0ml) / 0.0400M = 226.25ml.

Therefore, to create a 0.0400 M solution of NaBr from a 1.20 M solution of NaBr, you need to add enough water to a total volume of 226.25 ml.

to know more about solution refer here:

https://brainly.com/question/30665317#

#SPJ11

Never use a spatula to empty a bottle with solid chemicals. You will contaminate the chemical if you do this. Pour solid into your straight in place of it.

If this solid substance or a liquid containing it comes in touch with your skin, immediately wash it with soap and water to remove any contamination. After cleaning, seek medical assistance if the irritation continues.

The area should be immediately thoroughly flushed with water for at least 15 minutes. Try to prevent cross-contamination if flushing your eyes is not necessary.

To know more about solid chemicals visit:-

brainly.com/question/14966269

#SPJ1

The objective of measuring the freezing point of a solution of your compound is: to determine its purity or concentration.

When a compound is dissolved in a solvent, the freezing point of the resulting solution is lower than that of the pure solvent. This is because the solute molecules lower the freezing point of the solvent by interfering with the formation of the crystal lattice. The extent of the depression of the freezing point depends on the concentration of the solute and its nature.

To measure the freezing point of a solution of your compound, the solution is cooled until it begins to solidify. The temperature at which this occurs is recorded as the freezing point of the solution. By comparing the freezing point of the solution with the freezing point of the pure solvent, the concentration or purity of the solute can be calculated using the freezing point depression equation:

ΔTf = Kf · m,

where ΔTf is the freezing point depression, Kf is the freezing point depression constant, and m is the molality of the solute in the solution.

The freezing point depression constant is a property of the solvent and is typically provided in reference tables. Once the molality of the solute is determined, the molar mass or weight percent of the solute can be calculated, allowing for the determination of the purity or concentration of the compound.

To know more about concentration refer here:

https://brainly.com/question/10725862#

#SPJ11

The number of moles of acetic anhydride used is 0.06 moles.

The number of moles of acetic anhydride (C₄H₆O₃) can be calculated by multiplying the given volume by the given density, and then dividing the result by the molar mass of acetic anhydride. The molar mass of acetic anhydride (C₄H₆O₃) is the sum of the atomic weights of each element.

In this case, we have : Volume (V) = 5.65 mL, Density (ρ) = 1.08 g/mL, and Molar mass (M) = 102.09 g/mol

Solving for the number of moles, we get:

Number of moles (n) = V x ρ / M

n = 5.65 mL x 1.08 g/mL / 102.09 g/mol

n = 0.06 moles of acetic anhydride

Learn more about density here: https://brainly.com/question/1354972.

#SPJ11

Answer:

Explanation:

3.6797837188344116 mol