Answer:
(A) Nickels and pennies
plss help me with this I don't even know where to start to solve it
From the balanced equation of the reaction, the coefficients of the reactants and products are 1:2:1.
What is a balanced equation of a chemical reaction?A balanced equation of a chemical reaction is an equation which balances the atoms of each element on the reactants as well as the products side of a chemical reaction.
The balanced equation of the reaction that occurs when magnesium bromide is heated is shown below:
[tex]MgBr_2 \rightarrow Br_2+Mg [/tex]
Therefore, the coefficients of the reactants and products are 1:2:1.
Learn more about balanced equations at: https://brainly.com/question/26227625
A 0.250 mol sample of gas at 35.0°C exerts a pressure of 700 torr in it's container. What pressure will the container exert if the volume expands to 10.0L and the temperature is cooled to 5.0°C?
Calculate the molarity of a solution prepared by diluting 7.0 mL of 4.0 M solution to a volume of 30 mL. Select the correct answer below: 0.76 M 0.87 M 0.93 M 1.02 M
Answer:
0.93 M
Explanation:
Molarity = [tex]\frac{Moles}{Volume}[/tex]
4.0M = [tex]\frac{x}{0.007 L}[/tex]
4.0 M x 0.007 L = Moles = 0.028
Molarity = [tex]\frac{Moles}{Volume}[/tex]
Molarity = [tex]\frac{0.028 moles}{0.03 L}[/tex]
= 0.93 M
When a thermometer is suspended in an insulated thermos that contain a block of ice, the temperature recorded on the thermometer drops. Describe the direction of heat flow.
The heat flows from inside to the outside direction because of lowering of temperature inside the thermos.
How the temperature of ice drops?When a thermometer is suspended in an insulated thermos that contain a block of ice, the temperature recorded on the thermometer drops, the direction of heat flow is from inside to the outside the thermos. This is because of the insulating material in which the ice is kept and the lowering of the temperature.
So we can conclude that the heat flows from inside to the outside direction because of lowering of temperature inside the thermos.
Learn more about thermometer here: https://brainly.com/question/2339046
What is bee venom an example of?
O nucleic acid
O carbohydrate
O fat
O protein
Answer:
O protein
Explanation:
Bee venom (BV) is a complex mixture of proteins and contains proteins such as phospholipase and melittin, which have an effect on blood clotting and blood clots.
HGD
During complete metamorphosis, what best describes the transformation from a larva to a pupa?
The larva goes through a big change in color.
The larva might form a cocoon or a chrysalis.
The larva might hatch into an adult.
The larva sheds its skin several times.
Answer:The larva might form a cocoon or a chrysalis.
Explanation:
This adaptation allows the panda to perform which activity?
A
Grasping
B
Running
C
Scratching
D
Throwing
Answer:
A grasping :)
Explanation:
The panda uses the "thumb" to grab onto bamboo to eat! Without this, the panda would not be able to eat the bamboo!
Have an amazing day!!
Please rate and mark brainliest!!
according to newtons second law of motion,what is force equal to?
Answer:
This isn't chemistry but the answer is Force = mass x acceleration
what is daily product ? Any ten point
Answer:
the interest applied on the end of day balance.
Explanation:
Which of the following conversions is/are incorrect.
a.1 meter = 1000 millimeters
b.100 millimeters = 1 centimeter
c.500 centimeters = 0.5 meters
d. 1 kilometer = 1000 meters
C+A
B+ C
D+ C
A+B
Answer:
B + C ARE INCORRECT FROM THE ABOVE GIVEN CONVERSIONS.
A graphic designer has the choice to download design software on her computer and then design a logo or to use an online
version of the software to design the logo. Identify one advantage and one disadvantage of using the online software to design
the logo 2 points)
An online version is the availability of the application on the web and the internet. The online version of the logo designer is advantageous as it provides more customization choices.
What is logo designing?A logo design is a method to create logos that represent the brand of the business corporation or any other organization, it represents the company and brand.
Online software for logo designing provides more choices for customization as more fonts, styles, graphics, colors, and effects are present in online software.
The use of online software can be disadvantageous as it can be copied. The same tool and online data can be used to create the same logo and can be harmful to the company.
Therefore, using online software for logo designing can be both advantageous and disadvantageous.
Learn more about logo designing here:
https://brainly.com/question/1493739
#SPJ1
Answer:
Explanation:first one
pls pls help me with this
Answer:
1. lava
2. caldera
3. true
4. true
5. before
How does a specific theory compare to a scientific law
Do you mean scientific theory? If so, then scientific theories and laws are principles which can be used to better understand the world and space around us.
Silver chromate is sparingly soluble in aqueous solutions. The sp of Ag2CrO4 is 1.12×10−12.
What is the solubility (in mol/L) of silver chromate in 1.20 M potassium chromate aqueous solution?
What is the solubility (in mol/L) of silver chromate in 1.20 M silver nitrate aqueous solution?
What is the solubility (in mol/L) of silver chromate in pure water?
The solubility (in mol/L) of silver chromate in 1.20 M in potassium chromate, silver nitrate and in pure water is
X = 5.0*10^-7 MX'' = 8.333*10^-13 MX'''= 6.694*10^-5 MThis is further explained below
What is the solubility (in mol/L) of silver chromate in 1.20 M potassium chromate aqueous solution?Generally,The Chemical reaction is
Ag2CrO4 <----> 2 Ag+ + CrO42-
Ksp = [Ag+]^2[CrO42-]
1.12×10−12 = [Ag+]^2[CrO42-]
Hence
1.12×10−12.=(2X)^2*(1.2)
X = 5.0*10^-7 M
b)
1.12×10−12=(1.2)^2*(X)
1.12×10−12= 1.44 * 1(X)^1
X'' = 8.333*10^-13 M
In conclusion
1.12×10−12=(2X)^2*(s)
1.12×10−12= 4(X)^3
X'''= 6.694*10^-5 M
Read more about Chemical reaction
https://brainly.com/question/16416932
Watch this video: G...
G Cotton gin - Wikipe... Copy of SOL 2 and..
2 pts
IN
Question 1
Determine Pxe in a container that has the following gases and respective pressures:
Gas
Pressure (kPa)
Xenon
?
Helium
77.3
Nitrogen dioxide
52.0
TOTAL
248.8
From the total pressure of the gaseous mixture, the partial pressure of xenon is 119.5 kPa
What is partial pressure of a gas?The partial pressure of a gas is the pressure that gas exerts when it is part of a mixture of gases which did not chemically react together.
The sum of the partial pressure of each gas in the mixture gives the total pressure.
In the gaseous mixtures above:
Total pressure = 248.8 kPa
Partial pressure of xenon = Total pressure - (Sum of partial pressure of the other gases)
Partial pressure of xenon = 248.8 - (77.3 + 52.0)
Partial pressure of xenon = 119.5
Therefore, the partial pressure of xenon is 119.5 kPa.
Learn more about partial pressure at: https://brainly.com/question/14119417
Which of the following best describes the process of carbon dioxide
sequestration?
O A. Technologies reduce the amount of carbon dioxide consumed by
forests.
O B. Technologies capture carbon dioxide and inject it into rock
formations,
O C. Technologies reduce the amount of carbon dioxide produced by
factories.
O D. Technologies capture carbon dioxide and release it into the
atmosphere
Answer:
C. Technologies reduce the amount of carbon dioxide produced by
factories.
Explanation:
simply the answer is C. trust me, im very smart
whats ur favorite type of subject in school
Answer:
MAthhh
Explanation:
Give me a brainly
Answer:
My favorite subject in school is P.E or Language arts
Explanation:
Which of the following distinguishing electron configurations is characteristi
of noble gases?
O nf14
Ond10
O npo
Ons2
Answer:
no.3 is your correct answer
what is mass ? give two examples
mass it the amount of matter present in any object or body. Everything we see around us has mass. For example, a table, a chair, your bed, a football, a glass, and even air has mass.
A solution contains an unknown amount of dissolved magnesium. Addition of
0.0877 mol of Na2CO3 causes complete precipitation of all of the magnesium.
What mass of magnesium was dissolved in the solution?
Taking into account the reaction stoichiometry, 2.13 grams of magnesium was dissolved in the solution.
Reaction stoichiometryIn first place, the balanced reaction is:
Mg²⁺(aq) + Na₂CO₃(aq) → MgCO₃(s) + 2 Na⁺(aq)
By reaction stoichiometry (that is, the relationship between the amount of reagents and products in a chemical reaction), the following amounts of moles of each compound participate in the reaction:
Mg²⁺: 1 mole Na₂CO₃: 1 moleMgCO₃: 1 moleNa⁺: 2 molesThe molar mass of the compounds is:
Mg²⁺: 24.3 g/moleNa₂CO₃: 106 g/moleMgCO₃: 84.3 g/moleNa⁺: 23 g/moleThen, by reaction stoichiometry, the following mass quantities of each compound participate in the reaction:
Mg²⁺: 1 mole ×24.3 g/mole= 24.3 gramsNa₂CO₃: 1 mole ×106 g/mole= 106 gramsMgCO₃: 1 mole ×84.3 g/mole=84.3 gramsNa⁺: 2 moles ×23 g/mole= 46 gramsMass of magnesium dissolvedThe following rule of three can be applied: If by reaction stoichiometry 1 mole of Na₂CO₃ react with 24.3 grams of magnesium, 0.0877 moles of Na₂CO₃ react with how much mass of magnesium?
[tex]mass of magnesium=\frac{0.0877 moles of Na_{2}C O_{3}x24.3 grams of magnesium }{1 mole of Na_{2}C O_{3}}[/tex]
mass of magnesium= 2.13 grams
Finally, 2.13 grams of magnesium was dissolved in the solution.
Learn more about the reaction stoichiometry:
brainly.com/question/24741074
brainly.com/question/24653699
okay this is the only way to get my answers
Answer:
Your answer is Answer thank me later :) <3
Explanation:
name this please, please pleas
Answer:
propyne
Explanation:
Do the reactants or the product have greater potential energy
Answer:
the reactants have more potential energy than the products have. The extra energy is released to the surroundings.
copper ii oxide and charcoal are black solids how would you distinguish between the two solid
Answer:Charcoal will burn. You may also be able to distinguish it by smell, since it's rarely purged of all its “burnt wood” residue. Copper oxide will dissolve in a strong acid, such as hydrochloric or sulphuric and form a blue solution
Explanation:
Oleic acid, a component of olive oil, is 76.54% C, 12.13% H, and 11.33% 0. The
experimental value of the molar mass is 282 g/mol.
a. What is the molecular formula of oleic acid?
b. If oleic acid has a density of 0.895 g/mL, how many molecules of oleic acid
are in 3.00 mL of oleic acid?
Answer:
a) The molecular formula of oleic acid is: [tex]C_{18}H_{34}O_{2}[/tex]
b) There are 5.74 x 10^21 molecules of oleic acid in a 3.00 mL sample.
Explanation:
a)
First, let's determine the empirical formula of oleic acid from the percentage composition provided by the question:
- Assuming a 100g sample of oleic acid, the correspondent mass of C, H and O would be:
mass of C = 76.54g
mass of H = 12.13g
mass of O = 11.33g
- We must determine the number of moles contained in each of the masses determined above. For that, let's use the atomic masses of C (12.01 u), H (1.007 u) and O (15.99 u) and the following equation:
[tex]number of moles = \frac{mass of sample}{molar mass}[/tex]
number of moles of C = 76.54g / 12.01 g/mol = 6.373 mol C
number of moles of H = 12.13g / 1.007 g/mol = 12.04 mol H
number of moles of O = 11.33g / 15.99 g/mol = 0.7086 mol O
- Next, we'll try to find whole-number ratios by dividing each number of moles obtained by the smallest value obtained (0.7086):
C = 6.373 / 0.7086 = 8.994 ≅ 9
H = 12.04 / 0.7086 = 16.99 ≅ 17
O = 0.7086 / 0.7086 = 1.000
- Now, we can write the empirical formula of oleic acid as: [tex]C_{9}H_{17}O[/tex]
Now that we have the empirical formula for oleic acid (C9H17O), let's check its molar mass and compare it to the experimental value provided by the question (282 g/mol):
molar mass (C9H17O) = 9 * 12.01 + 17 * 1.007 + 1 * 15.99 = 141.9 g/mol
Note that the molar mass obtained from the empirical formula (141.9 g/mol) and the experimental molar mass (282 g/mol) are different, thus we need to find an integer multiple to determine the molecular formula (keep in mind that molecular formulas always present kind and number of atoms of each element present in the molecular compound, while the empirical formula presents the smallest coefficients for each atom).
Molecular formula = n × Empirical formula
This integer multiple, n, can be obtained by dividing the molar mass, MM , of the compound by the empirical formula mass, EFM (the molar mass represented by the empirical formula):
n = MM / EFM
n = 282 / 141.9
n = 1.987 ≅ 2
Since the integer multiple is 2, we can multiply all coefficients in the empirical formula by 2 to find the molecular formula of oleic acid:
C9 H17 O x 2 = C18 H34 O2
Therefore, the molecular formula of oleic acid is: [tex]C_{18}H_{34}O_{2}[/tex]
b)
We need to calculate the amount of molecules of oleic acid in a 3.00mL sample, considering the density as 0.895 g/mL.
From the density provided, we can calculate the mass, in grams, of oleic acid contained in 3.00 mL of this compound:
1 mL ----------------------- 0.895 g oleic acid
3.00 mL ----------------- x
Solving for x, we have that there are 2.69 g of oleic acid in a 3.00 mL sample.
Next, considering the molar mass of oleic acid (282 g/mol), we can calculate the number of moles contained in 2.685g of the acid:
282 g -------------------- 1 mol oleic acid
2.69 g ----------------- y
Solving for y, we have that there are 0.00953 moles of oleic acid in a 3.00 mL sample.
Now, using the Avogadro's number (6.022 x 10^23 particles/mol), we can calculate the amount of molecules of oleic acid in the sample:
1 mol oleic acid ------------------------------- 6.022 x 10^23 molecules oleic acid
0.00953 mol oleic acid ------------------- z
Solving for z, we have that there are 5.74 x 10^21 molecules of oleic acid in a 3.00 mL sample.
Florida and the eastern border of South Carolina share a regional landform characterized by flat land and low elevation. Identify the landform shared by both states.
Karst
Keys
Coastline
Plateau
Answer: it is coastline.
Explanation: This anwser would only makw sense because of the low elevation and the flat land.
The landform shared by Florida and the eastern border of South Carolina is the coastline. Option C is the correct answer.
Both states are located along the Atlantic Ocean and have a similar geographical feature characterized by flat land and low elevation along their eastern borders. Option C is the correct answer.
The coastline refers to the area where the land meets the sea. It is typically marked by sandy beaches, coastal marshes, and barrier islands. In the case of Florida and the eastern border of South Carolina, this coastline is known for its relatively flat terrain and low elevation, which makes it susceptible to flooding and storm surge during hurricanes. The coastline plays a significant role in the economies and ecosystems of both states. It attracts tourism and provides opportunities for recreational activities such as beachgoing, fishing, and boating. It is also a vital habitat for various marine and coastal species, including birds, turtles, and marine mammals.
Learn more about Coastline here:
https://brainly.com/question/31942406
#SPJ3
The complete question is, "Florida and the eastern border of South Carolina share a regional landform characterized by flat land and low elevation. Identify the landform shared by both states.
a. Karst
b. Keys
c. Coastline
d. Plateau"
Why is sodium chloride not considered a molecular compound? What kind of compound is it?
Answer:
Something like table salt (NaCl) is a compound because it is made from more than one kind of element (sodium and chlorine), but it is not a molecule because the bond that holds NaCl together is an ionic bond. If you like, you can say that sodium chloride is an ionic compound.
Explanation:
what is the size of an atom when it generally decreases
Answer:
the size depends on where is moves across the periodic table.
Calculate the Kelvin and Fahrenheit temperature equivalent to 37° Celsius.
Answer:
310.15 Kelvin. 98.6 Farenheit
Explanation:
To calcuate the celsius to Kelvin you add 273.15 to the celsius. To calculate the celsius to farenheit you do (°C × 9/5) + 32 = °F. For the example, (37°C × 9/5) + 32 = 98.6°F.
You are conducting an experiment with two very reactive substances. One will react with oxygen (O) and other substances in the air, and the other will react to metal in a container. What type of environment can you seal them in so they only react with each other?
A. Seal them in a glass container in an atmosphere of argon (Ar) gas.
B. Suspend them in a bromine (Br) solution inside a glass container.
C. Seal them in a container of soft alkali metal such as lithium (Li), in an atmosphere of hydrogen (H) gas.
D. Seal them in a container made of alkali earth metal, such as calcium (Ca).
Answer:
A. Seal them in a glass container in an atmosphere of argon (Ar) gas.
Because Argon is an inert/noble gas which do not react with other elements/radicals. Thus, best way to make two radicals/substance only react is to seal them in glass container consisting atmosphere of Argon (Ar)..
Note: I also dont know if it's correct answer.. Since I am just giving my logic.. I hope it will help you
- Regards Rishab...
Answer: C. Seal them in a glass container in an atmosphere of argon (Ar) gas.
Explanation: Founders Educere answer ;)