The advantages of implementing cloud computing over services hosted internally are: a. Rapid elasticity b. On-demand services c. Metered services.
a. Rapid elasticity: Cloud computing services can rapidly scale up or down based on the changing needs of the user, providing greater flexibility and agility than on-premises solutions.
b. On-demand services: Cloud computing services can be quickly provisioned and used as needed, without requiring extensive setup time or infrastructure investments.
c. Metered services: Cloud computing services are typically billed on a pay-per-use or subscription basis, allowing users to pay only for what they use and avoid over-provisioning.
The other options listed are not advantages of implementing cloud computing over services hosted internally:
d. Extensive technical configuration: Cloud computing services often require less technical configuration than on-premises solutions, making them easier to use and manage.
e. On-site servers: Cloud computing services are typically hosted in off-site data centers, eliminating the need for on-site servers.
f. No Internet connection required: Cloud computing services require an Internet connection to access, as they are hosted in remote data centers.
You can learn more about cloud computing at
https://brainly.com/question/19057393
#SPJ11
you notice that your computer is running slow and decide to reboot the computer to see if that will fix the problem. during the reboot, you notice that the amount of ram shown during the ram count is not the same as it was the day before. what might cause this problem?
There are a few possibilities that could cause the amount of RAM shown during the RAM count to change after a reboot. They are :
HardwareBIOS SettingsSoftware Issue.What is RAM?RAM (Random Access Memory) is a type of computer memory that is used to temporarily store data that the computer is actively using.
The possibilities that could cause the amount of RAM shown during the RAM count to change after a reboot are:
Hardware issue: There could be a problem with the RAM module or slot, causing it to malfunction or become partially dislodged. This could cause the system to recognize less RAM than it should.
Software issue: There could be an issue with the operating system or other software that is causing the system to allocate less RAM to the system.
BIOS settings: The amount of RAM recognized by the system can also be affected by the BIOS settings. It's possible that a change was made to the settings that caused the system to recognize less RAM than before.
In any case, if the amount of RAM recognized by the system has changed.
Learn more about RAM:
https://brainly.com/question/30765530
#SPJ1
What blocks are needed to include a cutscene in a Scratch game?
A) Broadcast, stop other scripts
B) Forever, If, While
C) Play, If
D)When touching, Forever
The blocks needed to include a cutscene in a Scratch game are:
A) Broadcast, stop other scripts
What is the braodcast block used for?The "Broadcast" block is used to trigger a specific event, such as the start of a cutscene, while the "Stop other scripts" block is used to pause other scripts in the background to ensure that the cutscene runs smoothly.
Hence the broadcast block are needed to include a cutscene in a Scratch game
Read more on broadcast block here:https://brainly.com/question/9238983
#SPJ1
refer to the exhibit. a home wireless network is being configured within packet tracer. the user adds a wireless router, a pc, and three laptops. the user is reviewing the wireless connection on one of the laptops. what can be determined?
Based on the provided exhibit of a home wireless network being configured within Packet Tracer, it can be determined that the user is reviewing the wireless connection on one of the laptops in the network.
The exhibit shows the configuration of a home wireless network that includes a wireless router, a PC, and three laptops. The user is reviewing the wireless connection on one of the laptops. The exhibit does not provide information about the specific details of the wireless connection being reviewed, such as signal strength, speed, or security settings.
However, the user can use Packet Tracer to view and modify these settings as needed to ensure a stable and secure wireless network.
Learn more about home wireless network:
https://brainly.com/question/30225104
#SPJ11
write a cookiejar class that will is set to a capacity and tracks how much stuff the cookiejar is storing.
The CookieJar class can be used to track how much stuff is stored in a limited capacity. It should include a constructor, a store method, and a check method to ensure items are not overfilled.
A CookieJar class can be used to store items with a limited capacity. The class will track the amount of stuff stored and can be used to prevent overfilling. The class should include a constructor, which sets the capacity of the CookieJar. The class should also include a method to store items in the CookieJar and a method to check how much stuff is stored.
The store method should take a parameter of the item to be stored and should check if the CookieJar is already full. If it is not full, the item should be stored and the amount stored should be updated. If the CookieJar is already full, an error should be raised. The check method should return the amount of stuff currently stored in the CookieJar.
You can learn more about constructors at: brainly.com/question/29999428
#SPJ11
to qualify a column name, precede the name of the column with the name of the table, followed by a(n) .
To qualify a column name, precede the name of the column with the name of the table, followed by a period (.).
In a database, it is common to have multiple tables that are related to each other. When querying data from these tables, it is important to specify which table a particular column belongs to, especially if the column name appears in multiple tables.
This is known as the "table alias" or "table qualifier" and is used to specify which table the column belongs to, especially when multiple tables are being joined in a query. For example, if you have two tables named "Customers" and "Orders", and both tables have a column named "ID", you could specify which table's ID column you want to select by using the table qualifier: "Customers.ID" or "Orders.ID".
Learn more about syntax of referencing column names in SQL queries:https://brainly.com/question/29418402
#SPJ11
a student is creating a web site that is intended to display information about a city based on a city name that a user enters in a text field. which of the following are likely to be challenges associated with processing city names that users might provide as input? select two answers. responses users might attempt to use the web site to search for multiple cities. users might attempt to use the web site to search for multiple cities. users might enter abbreviations for the names of cities. users might enter abbreviations for the names of cities. users might misspell the name of the city. users might misspell the name of the city. users might be slow at typing a city name in the text field.
The two challenges associated with processing city names that users might provide as input when creating a website that displays information about a city based on a city name that a user enters in a text field.
Users might enter abbreviations for the names of cities. Users might misspell the name of the city. Explanation: When users enter city names, they may make typographical errors or use abbreviations for city names. This could cause issues when displaying search results. It is essential to develop the search algorithm to handle these situations. There are several approaches to handling this scenario: spelling correction, synonym matching, or a fuzzy search.
Two challenges associated with processing city names that users might provide as input on the web site are: users might enter abbreviations for the names of cities and users might misspell the name of the city.
Learn more about website here:
https://brainly.com/question/29777063
#SPJ11
aside from color names and hex color codes, what is another way to encode a css color value? give an example.
Aside from color names and hex color codes, another way to encode a CSS color value is by using RGB values. An example of CSS color value in RGB format is as follows: RGB (255, 0, 0), which represents the color red.
RGB values CSS (Cascading Style Sheets) can be used to style web pages. It is used to change the appearance of text, backgrounds, borders, and many more. CSS supports three different ways to describe colors on a web page, which include color names, RGB values, and Hexadecimal color codes.
RGB values are specified as a set of three numbers that represent the red, green, and blue values. They have the following syntax: RGB (red, green, blue), where each color value is a number between 0 and 255. For example, the RGB value for red is RGB (255, 0, 0). The RGB color model is based on the colors of light, and its main advantage is its ability to create millions of color combinations.
You can learn more about RGB values at: brainly.com/question/19262252
#SPJ11
a) draw the runtime stack after each line executes under static scoping. what value assigned to z in line 12? b) draw the runtime stack after each line executes under dynamic scoping. what value assigned to z in line 12?
Runtime stack for Static Scoping, the value of the z variable at line 12 is 20, and the Runtime stack for Dynamic Scoping, the value of the z variable at line 12 is 10.
As per the given question, we need to create a runtime stack for both Static and Dynamic Scoping, respectively. And the value of the z variable on line 12 needs to be evaluated. Now, let's proceed with the solution:
Static Scoping: In Static scoping, the variable declared in the outer block retains the same value for all the inner blocks. That means, the variable is not changed by the inner block. Hence, z = 20, will remain the same throughout the program.
Here's the value of the z variable at line 12: 20
Dynamic Scoping: In Dynamic scoping, the variable declared in the inner block, overwrites the variable declared in the outer block. Hence the value of the z variable at line 12 will be 10.
Here's the value of the z variable at line 12: 10
To learn more about "dynamic scoping", visit: https://brainly.com/question/31107091
#SPJ11
when sitting at a computer running linux, what key combination is pressed to open the graphical terminal?
Press the "Ctrl+Alt+T" key combination to open the graphical terminal when sitting at a computer running Linux. This shortcut allows users to quickly access the command-line terminal from the Linux graphical user interface (GUI).
First, make sure that your Linux machine is powered on and that you are logged in. Then, press the "Ctrl+Alt+T" keys simultaneously on the keyboard. This will open up a window displaying the command-line terminal. In the terminal, you can type and execute commands for the Linux operating system.
To exit the terminal, type in the command “exit” and press enter. This will close the terminal and return you to the Linux GUI. The “Ctrl+Alt+T” key combination can be used to quickly access the Linux command line terminal on any Linux machine.
You can learn more about Linux at: brainly.com/question/30176895
#SPJ11
what tool in ehr go provides increased visibility to an allergy entered using the tab you selected as your answer for question 6?
The tool in EHR Go that provides increased visibility to an allergy entered using the tab you selected as your answer for question 6 is the "Allergies" tab. This tab allows users to easily track and manage allergies and other medical information.
The Allergies tab is broken down into two sections: the Allergies & Reactions section, which displays all allergies entered, and the Current Allergies section, which shows only active allergies. By clicking on an allergy, users can view the source, severity, onset date, reaction, and other important information.
The Allergies tab also allows users to easily add and remove allergies, as well as adjust their severity levels. The "Add Allergy" button lets users enter a new allergy or edit an existing one. To remove an allergy, simply click the red "Remove Allergy" button.
Additionally, the Allergies tab provides an easy way to set up alerts for any new allergies or changes to existing allergies. This feature helps to ensure that medical staff is alerted of any new allergies or changes in severity.
You can learn more about EHRs at: brainly.com/question/30086702
#SPJ11
How can you tell an open innovation project from one that is not?
An open innovation project is one in which a company seeks external ideas, knowledge, and expertise from outside the organization to advance its goals, rather than relying solely on internal resources. Conversely, a project that is not open innovation relies primarily on internal resources and expertise.
Here are some characteristics of an open innovation project:
Collaboration: Open innovation projects involve collaboration between internal teams and external partners such as customers, suppliers, academic institutions, startups, and other companies.
Sharing of knowledge: An open innovation project requires sharing of knowledge, information, and expertise between the internal and external parties.
Involvement of external parties: In an open innovation project, external parties are actively involved in the innovation process, from ideation to commercialization.
Innovation ecosystem: An open innovation project is part of a larger innovation ecosystem that fosters the exchange of ideas, knowledge, and expertise.
Access to resources: An open innovation project provides access to external resources such as funding, facilities, equipment, and talent.
In contrast, a project that is not open innovation is typically driven by internal resources and expertise. Internal teams are responsible for all aspects of the innovation process, and external parties are not involved in any significant way.
In summary, an open innovation project involves collaboration, sharing of knowledge, involvement of external parties, an innovation ecosystem, and access to external resources.
what uses of information technology might be considered improper, irresponsible, or harmful to other people or to society?
Information technology is one of the many tools managers use to deal with change and complexity. Today, some people misuse IT in a variety of ways to harm others or society.
What is meant by information technology?Information technology includes creating communication networks for a business, safeguarding data and information, creating and managing databases, helping staff members with computer or mobile device issues, and carrying out a variety of other tasks to ensure the effectiveness and security of business information.One of the occupations with the fastest growth rates is technology. An information technology degree is worthwhile since it offers a high rate of return on investment. There is double-digit yearly increase in a few professions, including information security analysts, network architects, and web developers.Hardware and software for organisations are designed, tested, installed, maintained, and repaired by IT specialists.While some organisations will have an in-house IT team, smaller enterprises may engage independent IT professionals for certain tasks.To learn more about information technology, refer to:
https://brainly.com/question/12947584
when a data set is tabulated into bins, we lose information about the location of the x values within bins but gain clarity of presentation because grouped data can be displayed more compactly than raw data. true false question. true false
The given statement, when a data set is tabulated into bins, we lose information about the location of the x values within bins but gain clarity of presentation because grouped data can be displayed more compactly than raw data, is true.
However, this loss of information is outweighed by the clarity of presentation gained by grouping data into bins, as this makes the data more compact and easier to visualize.
One major advantage of grouped data is that it can be displayed more compactly than raw data. This creates a clearer and more concise picture of the data, which can be useful when presenting data to others. Additionally, it can be easier to identify patterns and trends in grouped data, as it reduces the amount of noise in the data.
Learn more about tabulation of data:
https://brainly.com/question/26358920
#SPJ11
Identify the most suitable layout for a facility that handles a wide variety of customized orders.
a. A cellular layout
b. A process layout
c. A fixed-position layout
d. A product layout
The most suitable layout for a facility that handles a wide variety of customized orders is :
(b) A process layout
The most suitable layout for a facility that handles a wide variety of customized orders is a process layout. A layout can be defined as the way equipment, machinery, and people are arranged within a building or site.
Process Layout is the layout that is most suitable for a facility that handles a wide variety of customized orders. Process layouts are made up of various departments that perform similar operations. The workflow is more adaptable to changes in customer needs and product lines in this type of layout. A process layout is a type of layout where machines and workstations are arranged according to the processing needs of the various products or product groups produced in the facility. In this type of layout, each department has its own set of equipment and can manufacture a wide range of products. Thus, the process layout is the best layout for a facility that handles a wide variety of customized orders.
Thus, we can conclude that for the given question, the correct option is :
(b) A process layout
To learn more about process layout visit : https://brainly.com/question/15101405
#SPJ11
what social conditions gave rise to the memphis lynching? view keyboard shortcuts edit view insert format tools table 12pt paragraph
The Memphis Lynching was a result of the deep racial tensions that had been escalating in the city since the end of the Civil War.
African Americans had been the victims of racial violence, economic exploitation, and political oppression since the end of the war. White supremacists had targeted African American political activists, labor organizers, and religious leaders, and had used tactics of intimidation and terror to ensure that African-Americans could not exercise their civil rights. The Memphis Lynching was a result of this hostile environment, as the alleged perpetrator of the murder, Ell Persons, had been accused without evidence and was subjected to an extra-judicial mob execution.
This event was an example of how the social conditions of the time had given rise to a culture of violence and fear, and how African Americans were denied basic civil rights.
You can learn more about racial tension at: brainly.com/question/8148930
#SPJ11
if a relational database table is in boyce-codd normal form, it is also in group of answer choices d. all of a., b., and c.
Yes, if a relational database table is in Boyce-Codd normal form (BCNF), it is also in all of a., b., and c.
BCNF is a normal form in database normalization that further refines the results of the Third Normal Form (3NF). It is an advanced form of database normalization, and it applies to the design of relational databases. It is an important tool for database designers, as it helps to reduce data redundancy and improves the integrity of the database.
In order to be in BCNF, a database must meet the following criteria: (1) every determinant must be a candidate key, (2) every non-prime attribute must be fully functionally dependent on a single determinant, and (3) all transitive dependencies must be eliminated. A database that meets these criteria is said to be in BCNF and is also in all of a., b., and c.
In conclusion, if a relational database table is in BCNF, then it is also in all of a., b., and c. BCNF is a higher form of normalization that eliminates transitive dependencies and improves database integrity.
You can learn more about Boyce-Codd normal form at: brainly.com/question/29735359
#SPJ11
which one of these connection types has the longest delay? group of answer choices cellular wired infrared wireless
The delay is greatest on cellular. Among all connection methods, wired networks can offer the fastest data transmission rates.
How do wireless access points and routers differ?A local area network is created by the router, which also controls all of the connected devices and communication. On the other hand, an access point is a sub-device of the local area network that enables more devices to be connected to the network and offers another location for devices to connect from.
What does a router do in a network?One or more packet-switched networks or subnetworks can be connected using a router. It manages traffic between these networks by forwarding data packets to their intended IP addresses and permits communication between these networks.
To know more about data transmission visit:-
https://brainly.com/question/13382659
#SPJ1
you are connecting cat 5e cables to a 110 block. what order should you connect the wires in to follow standard wiring conventions?
To connect Cat 5e cables to a 110 block and follow standard wiring conventions, you should use the T568B wiring standard.
This standard requires that you arrange the wires in the following order: Orange-White, Orange, Green-White, Blue, Blue-White, Green, Brown-White, and Brown.
To begin, arrange the wires in the above order. Strip off about 1/2 inch of insulation from the end of each wire and use the 110 blocks punch-down tool to press the wires into their respective slots on the 110 block. Make sure to press the wires firmly and evenly into the 110 blocks. Once the wires are in place, use a continuity tester to make sure each wire is securely attached.
Finally, use a high-quality RJ45 modular plug and crimp it onto the Cat 5e cable. After that, your connection is complete and you have followed the standard wiring conventions.
You can learn more about the T568B standard at: brainly.com/question/30453676
#SPJ11
vremus is an art student who wants to start creating digital artwork on his computer. he wants to be able to create images that retain their quality in all sizes. which type of app should he use?
Student of art Remus wants to begin producing digital artwork on his computer. He hopes to be able to produce photos that are high-quality at all scales. He should use a drawing app as his app type.
What is digital artwork?Any creative endeavour or artistic practise that incorporates digital technology into the production or presentation process is referred to as digital art. It also applies to computational art that interacts with and utilises digital media. The term "digital art" describes works of art that incorporate digital technology into their production or display. Although various media, including video art, photography, and digital printing, are technically included in the definition, using computer programmes is most frequently linked to it.Digital art can be defined as anything created or produced using digital media, such as animations, pictures, drawings, movies, paintings, and other things.To learn more about digital artwork, refer to:
https://brainly.com/question/24410044
the d flip-flop can be build from two back-to-back s/r latches controlled by complementary clocks. question 20 options: true false
The given statement is true. The D flip-flop can be constructed using two back-to-back SR latches, which are controlled by complementary clocks.
Know what is a flip-flop! A flip-flop is a bistable device that can store one bit of memory. The input, output, clock, and power connections are found on the flip-flop. Each flip-flop has two output states, or a binary state, hence it is called a bistable device. They can be used to store binary information, hold a single bit of memory, or delay the input signal. What is an SR latch! A Set-Reset latch is a type of latch that is commonly used in digital electronics. It is made up of two NOR gates and has two inputs, namely, Set (S) and Reset (R). The latch's output is one of two stable states, namely Set and Reset. The input states have no impact on the output, implying that the latch can operate as a memory device without external clocking.
What is a D flip-flop! A D flip-flop is a clocked flip-flop that is used to store one bit of data. It is used to store the current state of the input D when the clock signal C changes from low to high. The output of the D flip-flop is one of two states, which are determined by the present input and the previous output. The output is determined by the logic state at the D input, which is the data input, when the clock signal transitions from low to high.
Learn more about latches visit:
https://brainly.com/question/29894001
#SPJ11
you conducted a security scan and found that port 389 is being used when connecting to ldap for user authentication instead of port 636. the security scanning software recommends that you remediate this by changing user authentication to port to 636 wherever possible. what should you do?
In order to remediate the issue with port 389 being used when connecting to LDAP for user authentication, you should change the authentication port to 636 wherever possible. To do this, you will need to identify the applications and services which are currently using port 389, and modify their configurations to use port 636 instead. Depending on the system, this may require changing the server configuration, client configuration, or both.
The Lightweight Directory Access Protocol (LDAP) is an open, vendor-neutral, directory service protocol that is used to manage and access distributed directory information over an IP network. It was developed by the Internet Engineering Task Force (IETF) as an evolution of the earlier X.500 Directory Access Protocol. LDAP provides a way to access and modify directory services that store information about users, groups, systems, networks, and other resources in a structured way. It allows clients to search, add, delete, and modify entries in a directory service, and supports authentication and authorization mechanisms to control access to the directory data.
Learn more about Lightweight Directory Access Protocol: brainly.com/question/28364755
#SPJ11
Under which of the following circumstances might you be most likely yo contact a professional to repair your computer or mobile device?a. screen is brokenb. computer cannot synchronize with bluetooth accessoriesc. computer or device is too hotd. printer will not print
The circumstance where you would be most likely to contact a professional to repair your computer or mobile device is when your A: screen is broken.
If the screen of a computer or mobile device is broken, it is a hardware issue that requires specialized repair. Attempting to fix it without proper training and tools can cause further damage. Therefore, contacting a professional repair service is the best course of action.
In the case of other issues like synchronization, heating, or printing, there are often troubleshooting steps that a user can take before considering professional repair. However, a broken screen is a physical issue that needs to be addressed by someone with the right expertise and resources.
Thus correct answer is: A. Screen is broken.
You can learn more about reparing broken screen at
https://brainly.com/question/15011392
#SPJ11
were you able to install and use the hashing tools from maresware? what was your experience using these tools?
I was able to install and use the hashing tools from Maresware. The experience was quite straightforward. The user interface is intuitive, and the tools are easy to use.
What is intuitive?Intuitive is an adjective that describes something that is easily understood or appreciated without the need for conscious reasoning. It is often used to describe an innate knowledge or understanding of something which cannot be explained logically.
The tools allow you to generate, compare, and verify hash values for files, folders, and networks for free. Additionally, you can use the tools to generate and verify checksums for both MD5 and SHA1 hashing algorithms. Overall, it was a pleasant experience using Maresware's hashing tools.
To learn more about intuitive
https://brainly.com/question/29816987
#SPJ1
Which of the following types of RAM needs to be constantly recharged to retain the contents? A. Dynamic RAM (DRAM) B. Static RAM (SRAM) C. Magnetoresistive RAM (MRAM) D. Flash Memory
The type of RAM that needs to be constantly recharged to retain the contents is A: Dynamic RAM (DRAM).
Dynamic RAM (DRAM) is the type of RAM that needs to be constantly recharged to retain the contents. DRAM stores data as a charge in a capacitor, which leaks over time and requires constant refreshing.
SRAM, on the other hand, stores data in a pair of cross-coupled inverters, which does not require constant refreshing. Magnetoresistive RAM (MRAM) uses magnetic storage elements to store data, and it does not require any refreshing. Flash memory is a type of non-volatile memory that retains its contents even without power, making it suitable for use in portable devices such as digital cameras and USB drives.
Thus, A: Dynamic RAM (DRAM) is correct answer.
You can learn more about RAM at
https://brainly.com/question/13748829
#SPJ11
The type of RAM that needs to be constantly recharged to retain its contents is Dynamic RAM (DRAM). It is because data is stored in capacitors that leak charge, hence needing to be refreshed regularly to avoid data loss.
Explanation:In the options given, the Dynamic RAM (DRAM) is the one that needs to be continually recharged in order to retain the information it holds. DRAM, unlike other RAM types like Static RAM (SRAM), Magnetoresistive RAM (MRAM), or Flash Memory, stores each bit of data in a separate capacitor within an integrated circuit. Because these capacitors leak charge over time, the information needs to be refreshed regularly to prevent data loss.
Learn more about Dynamic RAM here:https://brainly.com/question/34369068
Suppose a new technology X is partially backwards-compatible with an older technology Y so that any person who adopts X still receives some benefits from interacting with friends using Y ( and vice versa). Consider the following payoff matrix which models this situation of partial compatibility. Player B X Y
Player A X (5,5) (3,2)
Y (2,3) (4,4)
Suppose that technology X is spreading through a network of users of Y. The payoff to each individual is determined by playing the above coordination game with each of their neighbors in the network. Does this coordination game also result in a "threshold contation"? That is, if p is the fraction of node A's neighbors that adopt X, is there some critical value q such that A should adopty X, when p is at least q, and remain with Y when p is less than q? If so, determine the value of q. If not, explain why the threshold does not exist
Yes, this coordination game also results in a threshold contagion.
To determine the critical value q, we can use the concept of the best response. The best response for player A is to adopt X if and only if the expected payoff from adopting X is greater than the expected payoff from remaining with Y. We can calculate the expected payoffs as follows:
If A adopts X:
A's payoff when playing against a neighbor who uses X is 5 with probability p and 3 with probability (1-p)
A's payoff when playing against a neighbor who uses Y is 2 with probability p and 4 with probability (1-p)
Therefore, A's expected payoff from adopting X is:
5p + 3(1-p) with probability p
2p + 4(1-p) with probability (1-p)
If A remains with Y:
A's payoff when playing against a neighbor who uses X is 2 with probability p and 4 with probability (1-p)
A's payoff when playing against a neighbor who uses Y is 4 with probability p and 4 with probability (1-p)
Therefore, A's expected payoff from remaining with Y is:
2p + 4(1-p) with probability p
4 with probability (1-p)
To find the critical value q, we need to find the value of p at which A is indifferent between adopting X and remaining with Y. In other words, we need to find the value of p for which the expected payoffs from adopting X and remaining with Y are equal.
Setting the two expected payoffs equal to each other and solving for p, we get:
5p + 3(1-p) = 2p + 4(1-p)
Solving for p, we get p = 1/3.
Therefore, if at least one-third of A's neighbors adopt X, then A should adopt X as well. If fewer than one-third of A's neighbors adopt X, then A should remain with Y.
To get a similar answer on backward-compatible:
https://brainly.com/question/28571683
#SPJ11
I need unblocked games for PK Younge
Some popular types of unblocked games that are commonly available on the internet include games like Pac-Man, Super Mario Bros, Need for Speed and Call of Duty.
What are unblocked games?Interestingly, the term "unblocked games" is used by gamers to refer to games that are not blocked by one's school or workplace firewalls. In other words, students or employees have access to play them during their free time.
It is important to bear in mind, that while some argue that unblocked games can be a distraction and can negatively impact academic or work performance, some also argued that they can provide a much-needed break and can help relieve stress.
You can learn more about games here https://brainly.com/question/27355039
#SPJ1
You've asked an incomplete question. However, I provided some explanation of what unblocked games are.
the computer security resource center at nist provides several useful documents free of charge in its special publications area. t/f
The statement, "Computer Security Resource Center at NIST provides several useful documents free of charge in its Special Publications area" is True because the CSRC's Special Publications area provides free access to a variety of useful documents related to computer security, including guidelines, standards, and best practices
The National Institute of Standards and Technology (NIST) is a non-regulatory agency of the United States Department of Commerce. The agency promotes innovation and industrial competitiveness by advancing measurements, standards, and technology to enhance economic security and quality of life. The Computer Security Resource Center (CSRC) is a branch of NIST that provides cybersecurity publications, guidelines, and standards for both the public and private sectors. They provide several valuable documents free of charge in their Special Publications area.
To learn more about Computer Security; https://brainly.com/question/13013841
#SPJ11
how is a for loop useful when working with arrays
Answer: A for loop examines and iterates over every element the array contains in a fast, effective, and more controllable way. This is much more effective than printing each value individually: console.
Explanation:
which access list statement will permit all http sessions to network 192.168.144.0/24 containing web servers?
To permit all HTTP sessions to network 192.168.144.0/24 containing web servers, the following access list statement can be used:
access-list 101 permit tcp any 192.168.144.0 0.0.0.255 eq www
This access list statement allows any source IP address (denoted by any) to access any web server within the network 192.168.144.0/24 (denoted by 192.168.144.0 0.0.0.255) on port 80 (denoted by eq www). Port 80 is the default port used for HTTP traffic.
Note that this access list statement should be applied to the appropriate interface or interfaces on the router using the ip access-group command. The access list number (in this case, 101) can be modified to match the access list number being used on the router.
Learn more about web servers:
https://brainly.com/question/27960093
#SPJ11
A license filter in a search engine helps you find images online that you can legally copy for personal or commercial use without paying a fee.a. Trueb. False
The given statement "A license filter in a search engine helps you find images online that you can legally copy for personal or commercial use without paying a fee." is true because a license filter in a search engine allows users to search for images that have been licensed for specific types of use, such as personal or commercial use.
This helps users to find images that they can legally copy and use without infringing on the original creator's copyright. By filtering search results based on licensing information, users can avoid accidentally using images that are protected by copyright, and reduce their risk of facing legal action for copyright infringement. License filters are an important tool for anyone who regularly uses images in their work or personal projects and wants to ensure that they are using them legally.
You can learn more about search engine at
https://brainly.com/question/512733
#SPJ11