The answer is (A) -200 J.
The first law of thermodynamics states that the change in the internal energy of a system, ΔU, is equal to the heat added to the system, Q, minus the work done by the system, W:
ΔU = Q - W
In this case, we know that ΔU = -300 J (decrease in internal energy) and W = 100 J (work done on the system). Therefore, we can rearrange the equation to solve for Q:
Q = ΔU + W = -300 J + 100 J = -200 J
This means that the system lost 200 J of heat. However, the question asks for the change in heat, which means we need to take the negative sign into an account. Therefore, the answer is (A) -200 J.
The first law of thermodynamics is a fundamental principle of physics that states that energy can only be moved or changed from one form to another. This theory holds true for all types of energy, including mechanical, thermal, and electromagnetic energy.
The first law of thermodynamics is concerned with the conservation of energy in a system. It says that the total energy of a closed system remains constant, which includes both the system's internal energy and the work done on or by the system.
In other words, any change in a system's energy must be balanced by a change in the work or heat entering or exiting the system.
learn more about internal energy here
https://brainly.com/question/25737117
#SPJ1
which of the following statements about simple distillation is not correct? select the correct answer below: the distillate is heated in the still pot. the receiving flask is not heated. the still head is immediately above the still pot in the distillation apparatus. vapor condenses into the still receiver.
The incorrect statement about simple distillation is: "the distillate is heated in the still pot." In fact, it is the mixture that is heated in the still pot, not the distillate. Simple distillation is a process used to separate components of a mixture with different boiling points.
In the distillation apparatus, the still pot contains the mixture to be separated. When this mixture is heated, components with lower boiling points evaporate first. The vapors then rise and pass through the still head, which is immediately above the still pot.
The receiving flask, on the other hand, remains unheated. Its purpose is to collect the condensed liquid, known as the distillate. As the vapors cool down, they condense and drip into the still receiver, which is connected to the still head.
Vapor condensation in the still receiver allows the separated component to be collected in its pure form, while other components with higher boiling points remain in the still pot.
In summary, simple distillation involves heating a mixture in the still pot, allowing the vapors to rise through the still head, and condensing the vapors in the still receiver to collect the distillate. The incorrect statement is that the distillate is heated in the still pot, as it is actually the mixture that is heated.
Know more about simple distillation here :
brainly.com/question/24553469
#SPJ11
What are the differences between Alkane and Alkyl radicals?
Answer:
Alkanes are hydrocarbons with only single bonds between carbon atoms, while alkyl radicals are highly reactive species that contain a single unpaired electron and are formed when an alkane loses a hydrogen atom. Alkyl radicals are therefore not stable on their own and tend to quickly react with other molecules, while alkanes are relatively stable and unreactive.
Explanation:
consider the possible acid-base reactions and answer the following question: which buffer will have the greatest capacity resistance to changes in ph upon the addition of limited amounts of bases? group of answer choices 1.287m nac2h3o2 and 0.487m hc2h3o2 0.287m nac2h3o2 and 0.387m hc2h3o2 0.687m nac2h3o2 and 0.987m hc2h3o2 they have the same capacity 0.987m nac2h3o2 and 1.287m hc2h3o2 0.987m nac2h3o2 and 0.387m hc2h3o2
This means that a buffer solution can resist changes in pH caused by small amounts of added acid or base.
When answering questions on Brainly, a question-answering bot should always be factually accurate, professional, and friendly. Additionally, it should be concise and not provide extraneous amounts of detail.
Typos or irrelevant parts of the question should not be ignored, and the bot should use the terms specified in the question when answering.
Considering the possible acid-base reactions, the buffer that will have the greatest capacity resistance to changes in pH upon the addition of limited amounts of bases is 0.987M NaC2H3O2 and 1.287M HC2H3O2.
This is because the buffer with the highest concentration of weak acid and weak base will have the greatest buffer capacity.A buffer solution is a solution that resists changes in pH when small amounts of acid or base are added to it.
A buffer consists of a weak acid and its conjugate base or a weak base and its conjugate acid. These buffer solutions work by reacting with any added acid or base to form an equilibrium that minimizes the change in pH.
To learn more about : acid
https://brainly.com/question/25148363
#SPJ11
Find the area of the shaded region of the trapezoid. A. 364 sq. units B. 130 sq. units C. 429 sq. units D. 663 sq. units
the area of the shaded region of the trapezoid. is 270 - 45 = 225 sq. units. Thus, the answer is option A which is 225 sq. units.
To find the area of the shaded region in the trapezoid, we need to subtract the area of the smaller triangle from the area of the larger triangle. The height of both triangles is the same, so we only need to find the bases.
The base of the larger triangle is the sum of the bases of the trapezoid, which is 15 + 30 = 45 units. The height of the triangle is 12 units, so the area of the larger triangle is (1/2) x 45 x 12 = 270 sq. units.
To find the base of the smaller triangle, we need to subtract the length of the shorter base of the trapezoid (15 units) from the longer base (30 units) and divide by 2. So, the base of the smaller triangle is (30 - 15)/2 = 7.5 units. The area of the smaller triangle is (1/2) x 7.5 x 12 = 45 sq. units.
Therefore, the area of the shaded region is 270 - 45 = 225 sq. units. Thus, the answer is option A which is 225 sq. units.
The correct question is :Find the area of the shaded region of the trapezoid.
A. 225 sq. units
B. 130 sq. units
C. 429 sq. units
D. 663 sq. units
To know more about trapezoid, visit:
https://brainly.com/question/22227061
#SPJ1
When 1.00g of nylon is burnt in excess oxygen, it produces 2.50g of carbon dioxide. What is the percentage of carbon in nylon?
The mass percentage of carbon in nylon is approximately 68.1%.
What is mass of carbon?
The first step is to calculate the amount of carbon in 2.50g of carbon dioxide, using the molar mass of carbon and carbon dioxide:
1 mole of carbon has a mass of 12.01g
1 mole of carbon dioxide has a mass of 44.01g (12.01g for carbon + 2(16.00g) for oxygen)
So, the mass of carbon in 2.50g of carbon dioxide is:
(12.01g / 44.01g) x 2.50g = 0.681g
This means that the original 1.00g of nylon must have contained 0.681g of carbon. To find the percentage of carbon in nylon, we divide the mass of carbon by the mass of nylon and multiply by 100:
(0.681g / 1.00g) x 100% = 68.1%
Therefore, the percentage of carbon in nylon is approximately 68.1%.
To know more about nylon, visit:
https://brainly.com/question/10278626
#SPJ1
Complete question is: When 1.00g of nylon is burnt in excess oxygen, it produces 2.50g of carbon dioxide. the percentage of carbon in nylon is approximately 68.1%.
Please help!!!! Classify the following substances as electrolytes or non electrolytes:
Pure water, tap water, sugar solution, sodium chloride solution, hydrochloric acid solution, lactic acid solution, ethyl alcohol solution, pure sodium chloride
Answer:
Pure water: electrolyte (poor)
Tap water: electrolyte (small amount)
Sugar solution: nonelectrolyte
Sodium chloride solution: electrolyte
Hydrochloric acid solution: electrolyte
Lactic acid solution: electrolyte.
Ethyl alcohol solution: nonelectrolyte
Pure sodium chloride: strong electrolyte
Explanation:
Electrolytes are part of a solution that conduct electricity, while nonelectrolytes do not conduct electricity in a solution.
if 41.24 grams of sodium reacts with 18.69 grams of chlorine gas, how many grams of sodium chloride could potentially be formed
Answer:
30.7 grams
Explanation:
The balanced chemical equation for the reaction between sodium and chlorine gas is:
2 Na + Cl2 → 2 NaCl
The molar mass of sodium is 22.99 g/mol, and the molar mass of chlorine gas is 70.90 g/mol. Using these values, we can calculate the number of moles of each reactant:
Moles of sodium = 41.24 g / 22.99 g/mol = 1.794 mol
Moles of chlorine gas = 18.69 g / 70.90 g/mol = 0.263 mol
According to the balanced equation, the reaction uses two moles of sodium for every one mole of chlorine gas. Therefore, the limiting reactant is chlorine gas, and we can calculate the maximum amount of sodium chloride that can be formed:
Moles of NaCl = 0.263 mol Cl2 × (2 mol NaCl / 1 mol Cl2) = 0.526 mol NaCl
Convert moles of NaCl to grams:
Grams of NaCl = 0.526 mol NaCl × 58.44 g/mol = 30.7 g
The amount of sodium chloride that could potentially be formed is 30.4 grams.
To determine how many grams of sodium chloride could potentially be formed, we first need to balance the chemical equation for the reaction between sodium and chlorine gas:
2 Na + Cl2 → 2 NaCl
This equation shows that two moles of sodium react with one mole of chlorine gas to produce two moles of sodium chloride. We can use the given masses of sodium and chlorine gas to determine how many moles of each are present:
Molar mass of Na = 22.99 g/mol
Molar mass of Cl2 = 70.90 g/mol
Moles of Na = 41.24 g / 22.99 g/mol = 1.79 mol
Moles of Cl2 = 18.69 g / 70.90 g/mol = 0.26 mol
Since two moles of sodium react with one mole of chlorine gas, we can see that there is not enough chlorine gas present to react with all of the sodium. Therefore, chlorine gas is the limiting reactant in this reaction.
The amount of sodium chloride that could potentially be formed is limited by the amount of chlorine gas, so we need to calculate how many moles of sodium chloride can be formed from the available amount of chlorine gas:
Moles of NaCl = 0.26 mol Cl2 × (2 mol NaCl / 1 mol Cl2) = 0.52 mol NaCl
Finally, we can convert the moles of sodium chloride to grams using its molar mass:
Molar mass of NaCl = 58.44 g/mol
Mass of NaCl = 0.52 mol × 58.44 g/mol = 30.4 g
Therefore, the maximum amount of sodium chloride that could potentially be formed is 30.4 grams.
Learn more about the amount of sodium chloride formed here:
brainly.com/question/19949007
#SPJ11
olive oil is a liquid , so it contains mostly unsaturated fatty acids. these fatty acids have choose... intermolecular forces and choose... melting points.
Fatty acids are essential components of lipids and play an important role in the structure and function of biological membranes that are related to presence of double bonds in the hydrocarbon chains of unsaturated fatty acids.
Unsaturated fatty acids have weaker intermolecular forces than saturated fatty acids, which means that they have lower melting points. This is because unsaturated fatty acids have one or more double bonds in their hydrocarbon chains, which introduce kinks in the chains and prevent them from packing closely together. As a result, unsaturated fatty acids have more disordered and loosely packed structures, which makes them more prone to breaking apart and melting at lower temperatures compared to saturated fatty acids with stronger intermolecular forces and higher melting points.
Therefore, olive oil, which contains mostly unsaturated fatty acids, has weaker intermolecular forces and lower melting points than a solid fat like butter, which contains mostly saturated fatty acids.
Learn more about Fatty acids here:
brainly.com/question/30712004
#SPJ4
6. Draw a Bohr-Rutherford diagram for each of the following
molecules. ™
(a) fluorine (F₂)
(b) hydrogen fluoride
A Bohr-Rutherford diagram is a simplified visual representation of the atomic structure of an element. It is named after Niels Bohr and Ernest Rutherford.
How is a Bohr-Rutherford diagram represented?In a Bohr-Rutherford diagram, the nucleus of the atom is represented by a small circle in the center, and the electrons are shown as circles orbiting the nucleus in distinct energy levels or shells. The electrons in the innermost shell are closest to the nucleus and have the lowest energy level, while the electrons in the outermost shell have the highest energy level.
The number of electrons in each shell is determined by the element's atomic number. For example, hydrogen, which has an atomic number of 1, has one electron in its sole shell, while carbon, with an atomic number of 6, has two electrons in its inner shell and four electrons in its outer shell.
The Bohr-Rutherford diagram for fluorine (green) and hydrogen fluoride (purple) are shown.
Learn more about Bohr-Rutherford diagram here:
https://brainly.com/question/31220559
#SPJ1
Please hurryyyy 100 points
Answer:
As more force glider moves faster
A proton is trapped in a circular motion in a 0.725-T magnetic field,as shown. The radius of the circle is 5.10 cm. Dojon (a) Calculate the speed of the proton: In what direction is it moving in the circle clockwise or counterclockwise? (b) At the instant the proton is at the illustrated position an electric field is turned on that makes the proton continue straight line path, with the same spced and along the direction had at that instant: Calculate how strong and in what direction, is the electric field needed to do this: Clearly explain vour reasoning:
The speed of proton is [tex]2.99 x 10^5 m/s[/tex]. The direction of the electric field should be perpendicular to both the magnetic field and the velocity vector of the proton.
(a) To calculate the speed of the proton, we can use the formula:
v = (q x r x B) / m
where v is the speed, q is the charge of the proton[tex](1.6 x 10^-19 C)[/tex], r is the radius (0.051 m), B is the magnetic field (0.725 T), and m is the mass of the proton [tex](1.67 x 10^-27 kg)[/tex].
[tex]v = (1.6 x 10^-19 C * 0.051 m * 0.725 T) / (1.67 x 10^-27 kg)[/tex]
[tex]v ≈ 2.99 x 10^5 m/s[/tex]
The direction of the proton's movement depends on the orientation of the magnetic field. If the magnetic field is pointing into the page, the proton will move counterclockwise; if the magnetic field is pointing out of the page, the proton will move clockwise.
(b) To make the proton continue in a straight line path, we need an electric field that will balance the magnetic force. The force due to the electric field can be found using:
F = q x E
The force due to the magnetic field can be found using:
F = q x v x B
Since these forces must be equal, we can set them equal to each other:
q x E = q x v x B
E = v x B
[tex]E = 2.99 x 10^5 m/s × 0.725 T[/tex]
[tex]E ≈ 2.17 x 10^5 N/C[/tex]
The direction of the electric field should be perpendicular to both the magnetic field and the velocity vector of the proton. If the magnetic field is pointing into the page, the electric field should point downward; if the magnetic field is pointing out of the page, the electric field should point upward.
To know more about proton refer to-
brainly.com/question/1252435#
#SPJ11
Stoichiometry
These questions already have the answers I just need the work in the boxes please. You don’t even have to explain it please just set it up for me. I will Venmo 40$ to you aswell.
The image shows a balanced chemical equation:
2H₂(g) + O₂(g) → 2H₂O(g)
How are the electron configurations of elements arranged in the periodic table?The electron configurations of elements are arranged in rows and columns in the periodic table based on their increasing atomic numbers. The rows, called periods, represent the number of electron shells in each element, while the columns, called groups, represent the number of valence electrons.
What is the significance of the atomic number in the periodic table?The atomic number of an element determines its position in the periodic table. Elements with similar chemical properties are arranged in the same group, and the number of valence electrons in the outermost shell of an element corresponds to its position in the periodic table.
Thus, the atomic number provides a way to predict the chemical behavior of an element and its position in the periodic table.
To know more about elements,visit:
https://brainly.com/question/13025901
#SPJ1
calcium carbonate is a common ingredient in antacids that reduces the discomfort associated with acidic stomach or heartburn. stomach acid is hydrocholoric acid, hcl. what volume in milliliters (ml) of an hcl solution with a ph of 1.51 can be neutralized by 14.0 mg of caco3? volume: ml if the stomach contains 13.0 ml of ph 1.51 solution, will all of the acid be neutralized? yes no what percentage of the acid is neutralized? if all of the acid is neutralized enter 100%. percentage neutralized:
The volume (ml) of HCl solution at pH 1.52 that can be neutralized with a given amount of CaCO₃ is 17.87 mL
We want to determine the volume of HCl that can be neutralized with a given amount of CaCO₃.
First we will write the chemical equation for the reaction i.e.
2HCl + CaCO₃ → CaCl2 + CO2 + H2O
This means that now 1 mole of CaCO₃, 2 moles of HCl are needed to neutralize.
Mass = 27.0 mg = 0.027 g Using the formula,
mol = mass / molar mass
∴ CaCO₃ mol present =
CaCO₃ mol present = 0.00026977 mol
Since 2 mol HCl is required, 2 mol HCl 70 mol CaCO₃ must be neutralized 20. of CaCO₃ 444 0.00053954 mol HCl
∴ CaCO₃ needs to be neutralized 0.00053954 mol HCl Now for the volume of HCl solution at pH 1.
52 required.
We will first determine the HCl concentration = 10^(-1.52)
[H⁺] = 0.
0302 M
∴ HCl concentration 0.0302 M
Now, for the volume using the formula,
Volume = mol/concentration
Required HCl Volume = 0.01787 L
Hence, the volume in milliliters (mL) of an HCl solution with a pH of 1.52 that can be neutralized by the given CaCO₃ is 17.87 mL.
To know more about neutralization, visit,
https://brainly.com/question/1934578
#SPJ4
for a solution equilibrium, a change in concentration of a reactant or product does not change keq. group of answer choices true false
The given statement "A change in the concentration of the reactant or the product do not change keq" will be false. Because a change in the concentration of a reactant or product will change the value of Keq.
According to Le Chatelier's principle, when a stress is applied to a system at equilibrium, the system will respond in a way that partially counteracts the stress and reestablishes equilibrium. Changes in the concentration of a reactant or product will alter the concentrations of all species present in the reaction, and thus will disturb the equilibrium.
For example, if the concentration of a reactant is increased, the reaction will shift towards the product side to partially counteract the increase in the concentration of the reactant. This will result in an increase in the concentration of products and a decrease in the concentration of reactants. As a result, the value of Keq will change to reflect the new equilibrium concentrations of reactants and products.
To know more about Le Chatelier's principle here
https://brainly.com/question/2001993
#SPJ4
a trial run takes 42 seconds for the blue color to appear. the rate of reaction for this trial will be
The rate of reaction is 0.001 M/s. The answer is option e.
The rate of a reaction refers to the change in concentration of reactants or products per unit time. It is typically expressed in units of M/s, where M refers to the molarity of the solution (moles of solute per liter of solution). The rate constant (k) for a first-order reaction can be calculated using the half-life equation t1/2 = ln(2)/k.
In this case, t1/2 = 100 seconds, so k = ln(2)/t1/2 = 0.0069 s^-1.
The rate of reaction can be calculated using the first-order rate law, rate = k[A], where [A] is the concentration of the reactant.
Substituting the value, we get
rate = 0.0069 x 0.01 = 0.000069 M/s,
which is approximately equal to 0.001 M/s. Therefore, the answer is option e.
To know more about reaction, here
brainly.com/question/5102843
#SPJ4
--The complete question is. What is the rate of the reaction in M/s for Experiment 3, given that the concentration of one of the reactants or products is 0.01 M and the reaction follows first-order kinetics? The time it takes for the reaction to reach half completion is 100 seconds. The options provided are 0.22, 0.11, 0.005, 0.01, and 0.001 M/s.--
calculate the ph of a solution that is made when 0.10 l of 0.24 m benzoic acid and 3.00g of sodium benzoate (molar mass = 144.11 g/mol) are added together.
The pH of a solution that is made when 0.10 l of 0.24 m benzoic acid and 3.00g of sodium benzoate (molar mass = 144.11 g/mol) are added together is: 1.74.
To calculate the pH of a solution made by mixing 0.10 L of 0.24 M benzoic acid and 3.00 g of sodium benzoate, we need to determine the concentration of benzoic acid and benzoate ion in the mixture. Then, we can use the acid dissociation constant of benzoic acid to calculate the pH of the solution.
Step-by-step solution:
First, we need to calculate the amount of sodium benzoate added to the solution.
Number of moles of sodium benzoate = mass of sodium benzoate / molar mass of sodium benzoate
= 3.00 g / 144.11 g/mol
= 0.0208 mol
Now, we need to calculate the amount of benzoic acid added to the solution. Since we know the volume and concentration of benzoic acid, we can use the formula:
C = n / V
where,
C = concentration of benzoic acid
n = number of moles of benzoic acid
V = volume of solution in liters
Substituting the given values, we get,
0.24 M = n / 0.10 L
n = 0.024 mol
Therefore, the total number of moles of benzoic acid and benzoate ion in the solution are:
0.024 mol (benzoic acid) + 0.0208 mol (benzoate ion) = 0.0448 mol
Now, we can calculate the molarity of benzoate ion in the solution.
Molarity of benzoate ion = moles of benzoate ion / volume of solution in liters
= 0.0208 mol / 0.10 L
= 0.208 M
Molarity of benzoic acid in the solution is still 0.24 M since it is a weak acid and does not fully ionize in water. Now, we can use the acid dissociation constant of benzoic acid to calculate the pH of the solution.
The acid dissociation constant of benzoic acid is given by the following equation:
Ka = [C6H5COO-][H3O+] / [C6H5COOH]
where,
Ka = 6.5 × 10^-5
[C6H5COO-] = concentration of benzoate ion (M)
[C6H5COOH] = concentration of benzoic acid (M)
H3O+ = concentration of hydronium ion
We know the concentrations of benzoic acid and benzoate ion, but we need to calculate the concentration of hydronium ion. This can be done using the following formula:
Kw = [H3O+][OH-]
where,
Kw = 1.0 × 10^-14 (at 25°C)
Since the solution is neutral, the concentration of hydronium ion is equal to the concentration of hydroxide ion.
Concentration of hydroxide ion = Kw / [H3O+]
= 1.0 × 10^-14 / [H3O+]
We can substitute this value of [OH-] in the equation for Ka.
Ka = [C6H5COO-][H3O+] / [C6H5COOH]
= [0.208 M][H3O+] / [0.24 M]
= 1.73 × 10^-5
[H3O+] = sqrt(Ka × [C6H5COOH] / [C6H5COO-])
= sqrt(6.5 × 10^-5 × 0.24 / 0.208)= 0.018 M
Now, we can calculate the pH of the solution using the formula:
pH = -log[H3O+]= -log(0.018)= 1.74
To know more about "pH" refer here:
https://brainly.com/question/30656928#
#SPJ11
a solution contains some or all of the following ions: sn4 , ag , and pb2 . the solution is treated as described below. test 1) addition of 6 m hcl causes a precipitate to form. test 2) addition of h2s and 0.2 m hcl to the liquid remaining from test 1 produces no reaction. what conclusions can be drawn from the results of these two tests?
Test 1 and 2 take us to the conclusion that PbCl2 and AgCl precipitate in the first test. SnCl4 and SnS2, both of which are extremely soluble, are present in greater amounts in the second.
This study takes into account the acidity. Except for Pb2+, Ag+, and Hg2+ for chlorides and Sr+2, Ba+2, Pb+2, and Hg+2 for sulfides, the chlorides and sulfides groups are largely soluble.
In the first instance, the HCl content is very high. It implies that HCl reacts with all ions. Because SnCl4 and SnS2 are both very soluble in the solution, there is no reaction in the second case. With Le Chatelier, if we add more reactive, the equilibrium leans to reactive, thus there is more SnCl4.
To know more about cation/anion test, visit,
https://brainly.com/question/21082064
#SPJ4
Explain what happens to a hurricane once it hits land and travels across the land
As the hurricane moves over land, the hurricane is no longer fueled by this moisture. Therefore, the hurricane begins to slow down and die as it moves further inland. Hurricanes usually weaken when they hit land, because they are no longer being fed by the energy from the warm ocean waters.
Question :-
How to balance chemical equations?
I need steps
Don't spam from Go0gle
!!!!CLASS 10 CHEMISTRY!!!!
Answer:
the main aim of balance in an equation is making show that the total number of substances on the reactant side is equal to the total number of substances on the product side
Explanation:
so if we were to balance the equation of water water is a compound containing two molecules of hydrogen and one molecule of oxygen therefore
H+O=H2O
[tex]H+O_2= H_2O[/tex]
Element | Reactant | Product
H | 1 × 4 | 2×2
O | 2 | 1 × 2
[tex]4H+O_2= 2H_2O[/tex]
HELP! What is the authors purpose?
What do you notice about the evidence?
What observation can you make about the organization of an argumentative essay?
A well-organized argumentative essay will have each paragraph contain a distinct topic phrase, a logical progression of ideas and arguments, and proper citation and analysis of the supporting documentation.
How is a persuasive essay organized?The argumentative essay might be structured in one of two ways. The first strategy is to create all of your own arguments before opposing and disproving theirs. The second tactic is to take each point put out by your opponent and refute it on its own.
What formats are available for argumentative essays?There are three different methods for structuring the points of an argument: the Toulmin Method, the Classical Method, and the Rogerian Way.
To learn more about argumentative essay visit:
brainly.com/question/15727685
#SPJ1
what is the ph of a solution of 0.482 m ethylammonium chloride, c2h5nh3cl? the kb of ethylamine, c2h5nh2, is 4.3 x 10-4.
The pH of the solution of 0.482 m ethylammonium chloride is 1.96.
When dissolved in water, it dissociates into its ions,
C₂H₅NH₃Cl → C₂H₅NH₃⁺ + Cl⁻
The C₂H₅NH₃⁺ ion can react with water to form C₂H₅NH₂ and H₃O⁺ ions:
C₂H₅NH₃⁺ + H₂O ⇌ C₂H₅NH₂ + H₃O⁺
The equilibrium constant for this reaction is Kb, the base dissociation constant for ethylamine, which is given as 4.3 x 10^-4. We can use this value to calculate the concentration of hydroxide ions in the solution.
First, we need to calculate the initial concentration of ethylammonium ion, which is equal to the concentration of ethylammonium chloride because the salt dissociates completely in water:
[C₂H₅NH₃⁺] = 0.482 M
The initial concentration of hydroxide ions is negligible, so we can assume that it is zero. At equilibrium, the concentration of ethylammonium ion will decrease by x, and the concentrations of ethylamine and H₃O⁺ ions will both increase by x. Therefore, we can write the equilibrium concentrations as:
[C₂H₅NH₃⁺] = 0.482 - x
[C₂H₅NH₂] = x
[H₃O⁺] = x
Using the expression for Kb,
Kb = [C₂H₅NH₂][H₃O⁺]/[C₂H₅NH₃⁺]
Substituting in the equilibrium concentrations and the value of Kb,
4.3 x 10^-4 = x^2 / (0.482 - x)
Since x is much smaller than 0.482, we can assume that 0.482 - x ≈ 0.482. Solving for x,
x = sqrt(Kb[C₂H₅NH₃⁺]) = sqrt((4.3 x 10^-4)(0.482)) = 0.011
Therefore, the concentration of H₃O⁺ ions is [H₃O⁺] = 0.011 M. Using the expression for pH, we can calculate the pH of the solution,
pH = -log[H₃O⁺] = -log(0.011) = 1.96
To know more about ph, here
brainly.com/question/10697195
#SPJ4
roughly how much organic carbon (g c m-2 yr-1) is available each year for consumption by herbivores, decomposers, or for harvest?
A total of 1,000 to 100,000 million metric tons of carbon are thought to pass annually through the biological route. Around 65,500 billion billion metric tonnes of the Earth's carbon are trapped in rocks.
In the slow carbon cycle, carbon moves through rocks, soil, oceans, and the atmosphere over a period of 100–200 million years through a series of chemical reactions and tectonic activity. The annual average for the slow carbon cycle is [tex]10^{13}[/tex] to [tex]10^{14}[/tex] grammes (10100 million metric tons) of carbon. In contrast, the rapid carbon cycle transfers [tex]10^{16}[/tex] to [tex]10^{17}[/tex] grammes of carbon every year, but human emissions of carbon to the atmosphere are on the order of 1015 grammes.
Learn more about carbon here:
https://brainly.com/question/20319911
#SPJ4
What is the volume occupied by a 10 g sample of nitrogen gas at 250C and 1.0 atm pressure?
The volume occupied by a 10 g sample of nitrogen gas at 25°C and 1.0 atm pressure is 8.61 L.
To calculate the volume occupied by a 10 g sample of nitrogen gas at 25°C and 1.0 atm pressure, we need to use the ideal gas law equation:
PV = nRT
where P is the pressure, V is the volume, n is the number of moles, R is the universal gas constant, and T is the temperature in Kelvin.
First, we need to determine the number of moles of nitrogen gas present in the 10 g sample. To do this, we divide the mass by the molar mass of nitrogen:
n = m/M = 10 g / 28 g/mol = 0.357 mol
Next, we convert the temperature from Celsius to Kelvin:
T = 25°C + 273.15 = 298.15 K
Now we can plug in the values and solve for V:
V = nRT/P = (0.357 mol)(0.0821 L·atm/mol·K)(298.15 K)/(1.0 atm) = 8.61 L
For more question on pressure click on
https://brainly.com/question/24719118
#SPJ11
calculate the amount of oxygen (a) diffused in 1 hour under steady state conditions through a non-diffusing gas mixture of methane (b) and hydrogen (c) in the volume ratios of 2:1.
The amount of oxygen diffused in 1 hour under the steady state condition through a non diffusing gas mixture of methane is 0.14076 K mole/hr.m2. This is calculated using the expression of Molar flux.
The molar flux = [tex]DA_{M}[/tex] * [tex]P_{t}[/tex]* ([tex]P_{A1}[/tex] - [tex]P_{A2}[/tex]) / [tex]RTZP_{BM}[/tex]
[tex]PB_{M}[/tex] =([tex]P_{B2}[/tex]- [tex]P_{B1}[/tex])/ ln ([tex]P_{B2}[/tex]/ [tex]P_{B1}[/tex])
[tex]P_{B2}[/tex]= 105- 13*103 = 87*103 N/m2, [tex]P_{B2}[/tex]= 105- 6500= 93.5*103 N/m2
[tex]PB_{M}[/tex]= (87*1000- 93.5*1000)/ ln (87/93.5)= 90200 N/m2
[tex]DA_{M}[/tex] = Diffusivity of oxygen into mixture of Methane and hydrogen
= (yCH4/[tex]DA_{B}[/tex] + yH2/[tex]DA_{C}[/tex])
Since volume ratio of Methane to hydrogen is 2:1
y[tex]CH_{4}[/tex]= 2/3 and y[tex]H_{2}[/tex]= 1/3
[tex]DA_{B}[/tex]= 1.86*10-5 m2/sec and [tex]DA_{C}[/tex] = 7*10-5 m2/sec
[tex]DA_{C}[/tex]= 1/ (0.667/1.86*10-5+ 0.333/7*10-5) =2.462*10-5
[tex]N_{A}[/tex] = 2.462*10-5*(13000-6500)/ 8314*273*0.002*90200
= 3.91*10-5 K mole/m2.s
for 1 hour NA= 3.91*10-5*3600 Kmolm2 =0.14076 K mole/hr.m2
To learn more about Molar Flux
https://brainly.com/question/23287548
#SPJ4
The correct question is,
calculate the amount of oxygen diffused in 1 hour under steady state conditions through a non-diffusing gas mixture of methane
In what way can motion help in our daily lives?
Motion can help us in lot of ways.
Motion ensures that blood flows into our bodies.
It enhances the person's mood, ensures a healthy body, healthier bones and healthier lifestyle.
Name the following organic molecules.
The IUPAC names of the organic compounds are as follows:
1,1,3, trimethylcyclohexane2-methylethoxy-6-hydroxybutane3-oxopentanedioic acid dimethyl ester2-ethyl-4-hdroxypentanoic acidWhat is the IUPAC nomenclature of organic compounds?The IUPAC nomenclature of organic compounds is a system of naming organic chemical compounds according to a set of rules established by the International Union of Pure and Applied Chemistry (IUPAC).
The basic rules of the IUPAC nomenclature system involve identifying the longest continuous chain of carbon atoms in the molecule (the parent chain), assigning a root name to this chain based on the number of carbon atoms, and adding prefixes or suffixes to indicate functional groups and other substituents.
Stereochemistry (the arrangement of atoms in three-dimensional space) is also taken into account when naming compounds.
Learn more about organic compounds at: https://brainly.com/question/802962
#SPJ1
What does the 1st Law of Thermodynamics say about different forms of energy?
The first law of thermodynamics, also referred to as the law of conservation of energy, states that energy can only be transferred or converted from one form to another and cannot be produced or destroyed.
This implies that the overall level of energy in a confined system doesn't change.
The first law of thermodynamics, also known as the law of conservation of energy, states that energy cannot be created or destroyed, only converted from one form to another.
This indicates that even though energy can change its form, the overall amount in a closed system stays constant. An automobile, for instance, has kinetic energy when it is moving, but when it stops, the brakes of the vehicle transform that kinetic energy into heat energy.
A similar transformation occurs when a light bulb is switched on from electrical energy to light energy.
In conclusion, the first rule of thermodynamics states that although energy can change forms and is always conserved, it cannot be created or destroyed.
learn more about Law of Thermodynamics here
https://brainly.com/question/26035962
#SPJ1
a container with volume 71.9 ml contains water vapor at a pressure of 10.4 atm and a temperature of 465oc. how many grams of the gas are in the container?
The mass of the gas is 4.777 gram in the container with volume 71.9 ml contains water vapor at a pressure of 10.4 atm. and a temperature of 465 degree centigrade. This is calculated using ideal gas equation.
Volume of the water vapor = 71.9 ml = 0.0719L
Pressure of the water vapor = 10.4 atm.
Temperature of the water vapor = 465 degree C = 738 K
We can calculate the number of moles of water vapor by using the ideal gas equation.
PV = n RT
10.4 atm. * 0.0719L = n * 8.314 J/ mole· K * 10.4 atm.
n = 10.4 atm. * 0.0719L / 8.314 J/ mole· K * 10.4 atm.
= 0.0086 mole
We know that the number of moles is equals to,
Number of moles = mass / molar mass
= 0.0086 mole / 18 g/mole
= 4.777 g
To learn more about ideal gas equation
https://brainly.com/question/27870704
#SPJ4
select the sentence that generally is the best style for interesting writing based on what has been covered in the text and the powerpoints. group of answer choices the process was discovered by ace chemists. ace chemists discovered the process. ace chemists were responsible for discovering the process. discovery of this process was made by ace chemists.
"Ace chemists discovered the process" is generally the best style for interesting writing based on what has been covered in the text as well as the power points. Option B is correct.
This sentence uses active voice, which is generally considered more engaging and interesting than passive voice. It is also concise and clear in its message, avoiding unnecessary words like "responsible for" and "was made by".
"Ace chemists" is a phrase that refers to highly skilled or exceptional chemists. The term "ace" is often used informally to describe someone who is excellent or skilled in a particular field or activity. In the context of chemistry, "ace chemists" may refer to chemists who have made significant contributions to the field or who have exceptional skills and knowledge.
Hence, B. is the correct option.
To know more about chemists here
https://brainly.com/question/1674101
#SPJ4
--The given question is incomplete, the complete question is
"Select the sentence that generally is the best style for interesting writing based on what has been covered in the text and the power points. group of answer choices A) the process was discovered by ace chemists. B) ace chemists discovered the process. C) ace chemists were responsible for discovering the process. D) discovery of this process was made by ace chemists."--
1. how do you explain the relatively high conductivity of tap water compared to a low or zero conductivity for deionized water? 2. is gatorade a strong or weak electrolyte?
The relatively high conductivity of tap water compared to deionized water is due to the presence of dissolved ions in tap water. The high conductivity of Gatorade is also why it can be used in experiments involving electricity and conductivity.
Tap water contains various dissolved minerals and salts, such as calcium, magnesium, sodium, and chloride ions. These ions carry an electric charge and can conduct electricity, which leads to the relatively high conductivity of tap water. In contrast, deionized water has had all of its ions removed, resulting in a very low conductivity or zero conductivity.
Gatorade is a strong electrolyte. It contains a high concentration of dissolved ions, such as sodium, potassium, chloride, and phosphate ions. These ions dissociate into positive and negative ions in water, which can conduct electricity.
This is why Gatorade is sometimes used to rehydrate athletes during and after intense physical activity, as the electrolytes can help replace those lost through sweat and aid in the body's normal function.
To learn more about conductivity
https://brainly.com/question/7643131
#SPJ4