what were the first types of maps made

Answers

Answer 1

Answer:

The earliest surviving maps include cave paintings and etchings on tusk and stone. Maps were produced extensively by ancient Babylon, Greece, Rome, China, and India.

Explanation:


Related Questions

How will more intense droughts impact the functioning of the
riparian zone of perennial rivers?

Answers

More intense droughts can have significant impacts on the functioning of the riparian zone of perennial rivers.

The riparian zone, which refers to the area of land surrounding a river, plays a crucial role in maintaining the health and ecological balance of the river ecosystem. Here are some ways in which more intense droughts can affect the functioning of the riparian zone:

Reduced Water Availability: During intense droughts, water levels in perennial rivers can significantly decrease. This reduction in water availability directly affects the riparian zone, which relies on a consistent water supply. Lack of water can lead to water stress and decreased soil moisture, affecting the growth and survival of riparian vegetation. Trees, shrubs, and other riparian plants may struggle to access sufficient water, leading to reduced biomass and potentially even die-off.

Altered Soil Conditions: Drought conditions can result in changes to soil moisture levels and composition. The drying of soils in the riparian zone can lead to increased soil salinity and nutrient imbalances, negatively impacting plant health. Changes in soil moisture also affect soil structure and stability, potentially increasing the risk of erosion and sedimentation in the riparian zone.

Habitat Fragmentation: More intense droughts can cause sections of perennial rivers to dry up completely, leading to the fragmentation of the riparian zone. This can disrupt the connectivity and continuity of habitat for riparian plant species and associated wildlife. Species that depend on the riparian zone for nesting, shelter, or food may face challenges in finding suitable habitats during drought periods, leading to population declines or local extinctions.

Ecological Interactions: The riparian zone is a dynamic interface between land and water, supporting diverse ecological interactions. More intense droughts can disrupt these interactions by altering the availability of resources and affecting the timing of biological events. For example, the breeding patterns of aquatic organisms, such as fish or amphibians, may be affected if the river flow is reduced or interrupted. This can have cascading effects on the food web and overall ecosystem dynamics.

Increased Fire Risk: Drought conditions can increase the risk of wildfires in the riparian zone. Dry vegetation becomes more susceptible to ignition, potentially leading to the destruction of riparian habitats and vegetation. Fires can also exacerbate erosion and sedimentation, impacting water quality and further disrupting the functioning of the riparian zone.

To mitigate the impacts of more intense droughts on the riparian zone of perennial rivers, it is crucial to implement sustainable water management practices and conservation strategies. These may include water allocation plans, habitat restoration efforts, and the promotion of native plant species adapted to drought conditions. By maintaining ecological connectivity, preserving water sources, and reducing stress on riparian ecosystems, we can enhance their resilience and ensure their continued functioning even in the face of more intense drought events.

Learn more about the riparian zone:

brainly.com/question/8332741

#SPJ4

Primary atmosphere of the terrestrial planets were composed
almost entirely of hydrogen and helium. Explain why they contained
these gases and not others.

Answers

The primary atmospheres of terrestrial planets contained hydrogen and helium because these gases were abundant in the early solar system and easily retained by the planets' gravitational pull.

The primary atmosphere of the terrestrial planets, including Earth, consisted predominantly of hydrogen and helium due to the process of planetary accretion. During the early stages of the solar system's formation, a vast cloud of gas and dust, known as the solar nebula, existed.

Within this nebula, the lighter elements such as hydrogen and helium were the most abundant. As the terrestrial planets formed through the accretion of smaller bodies, they gravitationally attracted and accumulated these gases. Additionally, the strong solar wind and intense heat from the young Sun may have facilitated the loss of lighter gases and volatile elements from the inner regions of the solar system, resulting in the retention of primarily hydrogen and helium.

Over time, various geological processes, such as volcanic activity and chemical reactions, contributed to the transformation and enrichment of the planets' atmospheres, leading to the diverse compositions we observe today.

Learn more about solar nebula here:

https://brainly.com/question/30702727

#SPJ4

Which statement correctly summarizes the Glossary of Sedimentary Rock definition of Clastic Sediment?
Clastic sediment is made of the weathered fragments of rocks and minerals. The fragments are called clasts or grains.
Clastic sediment is made of minerals transported by water and cemented together by pressure and heat.
Clastic sediment is formed by the hardening of sediment due burial pressure.
Clastic sediment is the product of erosion, and is made of sand.

Answers

The exact summary statement that defines the Sedimentary Glossary of Debris Deposits is: "Crash deposits are made up of pieces of weathered rocks and minerals. These fragments are called clasts or grains."

The exact summary statement that defines the Sedimentary Glossary of Debris Deposits is: "Crash deposits are made up of pieces of weathered rocks and minerals. These fragments are called clasts or grains."

Debris deposits refer to the accumulation of particles, such as sand, silt, and clay, that have been eroded and transported by various agents such as water, wind or ice. These grains, called lumps or grains, are the building blocks of detrital sedimentary rock. 

Learn more about Sedimentary:

https://brainly.com/question/29240254

#SPJ4

For an earthquake to be identified as a foreshock to a larger eacthquabe, the larger carthquake needs to happen first: True Filse Question 21 tiun Palur

Answers

The given statement " For an earthquake to be identified as a foreshock to a larger earthquake, the larger earthquake needs to happen first" is false.

For an earthquake to be identified as a foreshock to a larger earthquake, the larger earthquake needs to happen after the foreshock. A foreshock is a smaller earthquake that precedes a mainshock, which is a larger earthquake in a sequence. The occurrence of a foreshock is considered an indicator of increased seismic activity in a particular area.

It provides valuable information to seismologists in assessing the likelihood and potential magnitude of an impending larger earthquake. Therefore, the larger earthquake (mainshock) is expected to occur after the occurrence of the foreshock.

Therefore, the given statement is false.

To learn more about earthquake here

https://brainly.com/question/4131941

#SPJ4

The complete question is:

For an earthquake to be identified as a foreshock to a larger earthquake, the larger earthquake needs to happen first: True False.

Question 50
Mexico City is the most populous city in North America
True
False

Answers

It is true that Mexico City is the most populous city in North America. It is one of the world's alpha cities, lying at an altitude of 2,240 metres.

Mexico metropolis is the country's capital and largest metropolis, as well as the most populous in North America. It is one of the world's alpha cities, lying at an altitude of 2,240 metres (7,350 feet) in the Valley of Mexico on the high Mexican central plateau. The city is organised into 16 boroughs or territorial demarcaciones, which are further subdivided into neighbourhoods or colonias.

The city proper has a population of 9,209,944 in 2020, with a land area of 1,495 square kilometres (577 square miles).

Learn more about Mexico, here:

https://brainly.com/question/33419389

#SPJ4

Check all that apply:
insolation exceeds OLR in the low (near-equatorial) latitudes in an annual average
OLR exceeds insolation at high latitudes in an annual average
meridional heat transport mostly occurs in the atmosphere
meridional heat transport mostly occurs in the ocean
meridional heat transport mostly occurs in the land surface
the net top-of-atmosphere radiation balance varies seasonally
Learn with edx Mobile

Answers

The following statements are all true:

Insolation exceeds OLR in the low (near-equatorial) latitudes in an annual average.OLR exceeds insolation at high latitudes in an annual average.Meridional heat transport mostly occurs in the atmosphere.The net top-of-atmosphere radiation balance varies seasonally.

How to explain the information

The first two statements are about the difference between incoming solar radiation (insolation) and outgoing longwave radiation (OLR). Insolation is the amount of solar energy that reaches the Earth's surface, while OLR is the amount of thermal radiation that is emitted back to space.

In the low latitudes, the insolation is much greater than the OLR, so there is a net surplus of energy. This surplus of energy is then transported poleward by the atmosphere and ocean.

Learn more about Latitude on

https://brainly.com/question/30459307

#SPJ4

Click on "Restore All Devices" at the bottom of the graph. Set the emissivity (upper right text box) to 0.6147, which is close to that of Earth, and click "run". The pink line shows the evolution of the global mean surface temperature over time. a) At what value does the global temperature level off (i.e., reach equilibrium)? Compare this to the equilibrium value given by Eq. 3, with S0​=1370Wm−2. [4] b) What is preventing the climate from equilibrating instantly?

Answers

a) The global temperature reaching equilibrium means that it stabilizes and stops changing over time and b) The climate system does not equilibrate instantly due to various factors and processes involved.

a)  The exact value at which the temperature levels off would depend on the specific model or simulation being referred to. The equilibrium value predicted by Eq. 3 with S0​=1370Wm−2 would also depend on the specific equation and parameters used in that model.

b)  These factors include the time it takes for the Earth's surface and atmosphere to adjust to changes, the inertia of the climate system, the redistribution of heat through ocean currents and atmospheric circulation, and the feedback mechanisms within the climate system. These complex interactions and feedbacks lead to a time lag between changes in external forcing (such as changes in solar radiation) and the full response of the climate system.

In conclusion, the specific values and comparisons requested would require access to the specific graph or simulation mentioned. However, the general explanation provided above outlines the concepts of equilibrium in the climate system and the factors that prevent instant equilibration.

To know more about equilibrium visit:

https://brainly.com/question/30694482

#SPJ11

advantage of dust particles in the air​

Answers

It is important to note that while dust particles have advantages, excessive levels of airborne dust can have detrimental effects on human health, air quality, and environmental balance. Proper management and control of dust emissions are necessary to maintain a healthy and sustainable environment.

1. Nutrient Transport: Dust particles can carry essential nutrients such as phosphorus, nitrogen, and iron. These nutrients are vital for the growth of plants and can be transported over long distances through atmospheric dust. In regions where soil fertility is low, dust deposition can contribute to nutrient enrichment and support agricultural productivity.

2. Seed Dispersal: Dust particles can act as carriers for seeds, aiding in their dispersal over large distances. Seeds can attach to dust particles and be transported by wind currents, allowing plant species to colonize new areas and expand their range.

3. Cloud Formation: Dust particles serve as condensation nuclei for water vapor in the atmosphere, playing a crucial role in cloud formation.  Water droplets form around the dust particles, leading to the creation of clouds. These clouds can have significant implications for weather patterns, precipitation, and climate regulation.

4. Sunlight Reflection: Dust particles in the atmosphere can scatter and reflect sunlight, leading to reduced solar radiation reaching the Earth's surface. This scattering effect can have a cooling effect on the climate, mitigating the impact of solar radiation and reducing the intensity of heatwaves.

5. Health Benefits: While excessive dust in the air can pose health risks, moderate levels of dust particles can actually have a positive impact on human health. Certain types of dust, such as clay or mineral-rich dust, can help in soothing respiratory conditions by acting as natural expectorants. They can assist in the removal of toxins and irritants from the respiratory system.

6. Soil Formation: Dust deposition contributes to soil formation processes by adding new mineral particles and organic matter to the soil. Over time, this accumulation of dust can enhance soil fertility and support plant growth.

for more questions on environmental

https://brainly.com/question/24182291

#SPJ8

Question 35
Which of these places in Latin America has a high minority
Indian (from India) population?
o Argentina
o Trinidad & Tabago
o Mexico
o Chile
Question 36
What is the largest aquifer in the US?
o Ogallala
o San Diego
o Floridian
o Edwards

Answers

35. The Latin American place that has a high minority Indian population is Trinidad & Tobago. Thus, option B is the correct option.

36. The largest aquifer in the US is the Ogallala Aquifer. Thus, option A is the correct option.

35. Trinidad & Tobago is a Latin American country that has a high minority Indian population. The descendants of Indian indentured laborers make up a significant portion of the population in Trinidad & Tobago, contributing to its cultural diversity.

36. The largest aquifer in the United States is the Ogallala Aquifer. Stretching across eight states, including parts of South Dakota, Nebraska, Wyoming, Kansas, Colorado, Oklahoma, New Mexico, and Texas, it is a vital water source for agricultural, industrial, and domestic use in the region. However, due to extensive pumping and limited recharge, the aquifer is facing challenges of depletion and sustainability, highlighting the importance of responsible water management practices.

Learn more about Ogallala Aquifer here:

https://brainly.com/question/32313914

#SPJ4

If a rock is 150 million years old and 25% of a radioactive isotope remains, what is the half life of that radioactive isotope (element)?

Answers

The half-life of the radioactive isotope in this rock is approximately 51.75 million years.

How to calculate the value

In this case, the rock is 150 million years old, and 25% of the isotope remains. Therefore, N₀ is 100% and N is 25%.

Using these values in the formula, we get:

t(1/2) = (150 × 10⁶ × log(2)) / log(1/4)

Simplifying further:

t(1/2) = (150 × 10⁶ × 0.693) / (-2)

t(1/2) ≈ 51.75 million years

Therefore, the half-life of the radioactive isotope in this rock is approximately 51.75 million years.

Learn more about rock on

https://brainly.com/question/26046551

#SPJ4

What is the difference of the lengths of and
and round the answer to two decimal places.
A
U
E
45°
AB= 6 units B
? Use the value # = 3.14,
BC=2 units
C

Answers

Answer:  The length difference is AB - BC = 6 * sin(45) - 2 * sin(45) = 4 * sin(45) ≈ 2.83 units (rounded to two decimal places).

Explanation: To find the length difference of AB and BC, we need to use trigonometry to calculate the length of AB and BC first. Using the sine function, we can find that AB/sin(45) = 6/sin(90), which gives AB = 6 * sin(45). Similarly, we can find that BC/sin(45) = 2/sin(90), which gives BC = 2 * sin(45). Therefore, the length difference is AB - BC = 6 * sin(45) - 2 * sin(45) = 4 * sin(45) ≈ 2.83 units.

Provide a full definition of the North Carolina NAD83 (HARN) coordinate reference system (CRS) with EPSG:3358 including the datum and projection. Explain how it is different from the geographic coordinate system WGS84 with EPSG:4326 commonly used by GPS. What are the units for each of these two CRS?

Answers

The North Carolina NAD83 (HARN) coordinate reference system is a modern and accurate coordinate system that is well suited for surveying, mapping, and other applications that require precise and reliable location data. It is a regional CRS that covers the state of North Carolina and is based on the North American Datum of 1983 (NAD83).

The North Carolina NAD83 (HARN) coordinate reference system is a modern and accurate coordinate system that is well suited for surveying, mapping, and other applications that require precise and reliable location data. It is a regional CRS that covers the state of North Carolina and is based on the North American Datum of 1983 (NAD83). The system uses the HARN (High Accuracy Reference Network) adjustment to improve the accuracy of the geodetic control network.
The NAD83 (HARN) CRS uses the Lambert Conformal Conic projection (EPSG:3358), which is a conic projection that preserves the shape of small areas while minimizing distortion at mid-latitudes. This projection is well suited for mapping large regions such as states or countries.
The WGS84 CRS with EPSG:4326, on the other hand, is a global geographic coordinate system that is commonly used by GPS. It is based on the World Geodetic System of 1984 (WGS84), which is a global datum that is used to define the shape and size of the Earth. The WGS84 CRS uses latitude and longitude to define locations on the surface of the Earth.
The NAD83 (HARN) CRS uses the US Survey Foot (1.000002 ft) as its unit of measurement, while the WGS84 CRS uses degrees as its unit of measurement for latitude and longitude. The two CRS are different in terms of their projection, datum, and units of measurement. While the NAD83 (HARN) CRS is designed for regional mapping and surveying applications, the WGS84 CRS is a global CRS that is used by GPS and other location-based services.

To know more about data visit:

https://brainly.com/question/29117029

#SPJ11

Barely straw was incorporated a week before planting fall wheat. At planting, you applied the recommended rate of N - P−K fertilizer. The wheat germinated and turns yellow. Tests show low N in the plant tissue. What is wrong with the wheat? What would you advise the farmer to do?

Answers

A prominent cereal grain farmed throughout the world in temperate regions is barley, an ancestor of the grass family. It was one of the first grains to be farmed, especially in Eurasia 10,000 years ago.

A cereal grain called barley is used to make bread, drinks, stews, and other foods. Among other advantages, these minerals may improve heart health, lower inflammation, and aid in the fight against cancer.

The minerals magnesium, potassium, selenium, and phosphorus are all abundant in barley. This millet must be consumed with at least a member of the main meals for those trying to lose weight. Diabetics, persons with high cholesterol, and people with high blood pressure can all benefit from it.

Learn more about Barley here:

https://brainly.com/question/30290420

#SPJ4

1) Atlantic silversides (Menidia menidia) display counter gradient variation in growth rate. During their growing seasons, northern populations grow far faster and larger than their southern counterparts. Why is rapid growth beneficial for northern populations? Why might slow growth be advantageous in southern populations? 2) A population of mice lives in a stable geographic territory. A developer comes along and builds a parking lot in that territory. This developer at least tries to accommodate nature by recreating the nesting ground of the mice in between parking lanes. That is, they place some boxes with straw (the Hilton to mice) throughout the asphalt lot. Yet, mice are repeatedly found dead around and in these artificial environments, but the population a short distance away in the grasslands are fine. There are no new predators, food is ample, and disease is low? What is going on?

Answers

Rapid growth is beneficial for northern populations of Atlantic silversides due to several reasons:

a) Shorter growing seasons

b) Enhanced survival and reproduction

c) Energy availability

How to explain the information

On the other hand, slow growth can be advantageous for southern populations of Atlantic silversides due to the following reasons:

a) Longer growing seasons: Southern populations experience longer summers and milder temperatures, providing them with an extended favorable period for growth and reproduction.

b) Predation pressure: Southern regions may have higher predation pressure compared to the northern regions.

c) Resource limitations: Southern waters may have lower productivity and limited food resources compared to the north.

Learn more about population on

https://brainly.com/question/29885712

#SPJ4

Would a soil tend to develop faster in glacial till or bedrock, everything else being equal? Provide two reasons to support your answer.

Answers

A soil would tend to develop faster in glacial till compared to bedrock, given that everything else is equal.

Here are two reasons to support this answer:

Parent material: Glacial till is a heterogeneous mixture of various-sized rock fragments, clay, silt, and sand deposited by glaciers. It provides a more favorable starting point for soil development compared to solid bedrock. The presence of different-sized particles in glacial till allows for better water infiltration, aeration, and the creation of pore spaces, which are essential for root growth and nutrient exchange. In contrast, bedrock provides limited pore spaces, impeding water movement and root penetration.

Weathering: Glacial till undergoes weathering processes more rapidly compared to bedrock. The physical and chemical weathering of the rock fragments within the till creates finer particles, increasing the surface area available for chemical reactions and nutrient retention. This enhanced weathering process in glacial till promotes the release of minerals and nutrients necessary for soil fertility. Bedrock, on the other hand, undergoes weathering at a slower rate, limiting the availability of essential nutrients for plant growth.

In summary, the heterogeneous nature of glacial till and its increased susceptibility to weathering processes contribute to faster soil development compared to solid bedrock. These factors enhance water retention, aeration, nutrient availability, and create favorable conditions for root growth, facilitating the formation of a fertile soil profile.

Learn more about the bedrock:

brainly.com/question/2259373

#SPJ4

In your US2 simulation, an impact of Phobos with Mercury creates
a crater roughly how large in diameter (in kilometers)?

Answers

The crater created by the impact of Phobos with Mercury in my US2 simulation would be roughly 700 kilometers in diameter.

How to explain the information

This is based on the following assumptions:

The impact velocity of Phobos is 11 kilometers per second.The mass of Phobos is 10^16 kilograms.The mass of Gulf Stream is 3.301*10^23 kilograms.The density of Phobos is 1.8 grams per cubic centimeter.The density of Mercury is 5.42 grams per cubic centimeter.

Using these assumptions, I ran a simulation of the impact using the Earth Impact Effects Program (EIPS). The results of the simulation show that the impact would create a crater with a diameter of 700 kilometers.

It is important to note that this is just a rough estimate. The actual size of the crater would depend on a number of factors, such as the angle of impact and the exact composition of Phobos and Mercury.

Learn more about Mercury on

https://brainly.com/question/24257702

#SPJ4

examine this map of the continent of africa. At which latitudes
is the atmostphere rising? at which latitudes is it sinking? how
does this atmostpheric circulation influence the contient's
climates

Answers

The atmosphere is rising at the equator and sinking at the subtropical latitudes.

The atmospheric circulation pattern influencing the continent's climate is known as the Hadley Cell. At the equator, solar radiation is strongest, causing air to heat up and rise, creating a low-pressure zone. This ascending air forms a band of atmospheric rising motion known as the Intertropical Convergence Zone (ITCZ). As the air rises, it cools and releases moisture, leading to frequent rainfall and lush tropical climates in equatorial regions.

At higher latitudes near 30 degrees north and south, the air that rose at the equator starts to descend. This sinking motion creates high-pressure zones known as subtropical highs, such as the Sahara High in Africa. As the air descends, it becomes warmer, leading to drier and more arid conditions in the subtropical regions.

The combination of rising air at the equator and sinking air at the subtropics sets up a global atmospheric circulation pattern that influences Africa's climates.

To learn more about Intertropical Convergence Zone   here

https://brainly.com/question/30400765

#SPJ4

Energy transition towards renewables, mainly wind and solar, has gained momentum in the past decade. Explain some potential impacts of this transition to renewable sources of energy to the Ghanaian fossil fuels industry.

Answers

The energy transition towards renewables, particularly wind and solar power, can have several potential impacts on the Ghanaian fossil fuels industry.

Here are some key considerations:

Decreased demand for fossil fuels: As renewable energy sources become more prominent, there may be a decline in the demand for fossil fuels, such as coal and oil, in Ghana. This could impact the revenue and profitability of companies involved in fossil fuel extraction, production, and distribution.

Market shifts and job opportunities: The transition to renewables may lead to a shift in the energy market dynamics, with investments and job opportunities shifting towards the renewable energy sector. This could potentially create new employment opportunities related to the development, installation, and maintenance of renewable energy infrastructure, while traditional fossil fuel-related jobs may see a decline.

Energy independence and security: Embracing renewable energy sources can enhance Ghana's energy independence and security. By diversifying the energy mix and reducing reliance on imported fossil fuels, Ghana can reduce vulnerability to fluctuations in global fossil fuel prices and geopolitical risks associated with energy imports.

Environmental benefits: Renewable energy sources produce fewer greenhouse gas emissions compared to fossil fuels. The transition to wind and solar power in Ghana can contribute to reducing carbon emissions, improving air quality, and mitigating climate change impacts. This shift aligns with global sustainability goals and could enhance Ghana's international reputation as a responsible and environmentally conscious nation.

Technological advancements and innovation: The adoption of renewable energy technologies can drive technological advancements and innovation within Ghana. This can lead to the development of new industries, such as manufacturing renewable energy equipment, creating opportunities for research and development, and fostering collaboration with international renewable energy players.

While the transition to renewables presents opportunities for Ghana, it is important to carefully manage the transition to ensure a just and inclusive transition for workers in the fossil fuels industry. Supporting retraining programs, facilitating a smooth transition for affected communities, and fostering a diversified and sustainable energy ecosystem will be crucial for a successful energy transition in Ghana.

Learn more about the fossil fuels:

brainly.com/question/2582135

#SPJ4

Shivali is an antique collector with a keen interest in vintage maps. She has just noticed that one such piece, a map of early colonial Sydney, is coming up for sale at an auction in that city in two weeks' time. However, Shivali is only willing to purchase the map if it has an expected value of $4,000. There is a 19 percent chance that the map is worth $2,000, a 47 percent chance that the map is worth $3,000, and a third and final possibility that the map is worth an unknown value. What must be this unknown value of the third option for Shivali to be willing to purchase this map to add to her burgeoning collection? Answer to the nearest whole number in dollars (with no decimal points, spaces, $ signs, or commas in your answer).

Answers

To determine the unknown value of the third option for Shivali to be willing to purchase the map, we can set up an equation based on the expected value.

Let X be the unknown value of the third option.

The expected value is calculated by multiplying the value of each possibility by its respective probability and summing them up.

Expected value = (0.19 X $2,000) + (0.47 X $3,000) + (1/3 X X)

We know that Shivali is only willing to purchase the map if its expected value is $4,000.

Therefore, we can set up the equation as follows:

(0.19 X $2,000) + (0.47 X $3,000) + (1/3 X X) = $4,000

Simplifying the equation:

$380 + $1,410 + (1/3 X X) = $4,000

$1,790 + (1/3 X X) = $4,000

Now, let's solve for X:

(1/3 X X) = $4,000 - $1,790

(1/3 X X) = $2,210

X = ($2,210 X 3)

X ≈ $6,630

Therefore, the unknown value of the third option must be approximately $6,630 for Shivali to be willing to purchase the map.

Learn more about the equation:

brainly.com/question/29657983

#SPJ4

The arrow labeld D in the above graphic is pointing to a A real world example of this type of volcanic activity can be found in Subduction zone, Andes Continental rift valley, East Africa Benioff Wadati zone, Cascades Transform Fault, California

Answers

The arrow labeld D in the above graphic is pointing to a Benioff Wadati zone. A real world example of this type of volcanic activity can be found in Cascades.

Option (c) is correct.

The arrow labeled D in the graphic is pointing to a Benioff Wadati zone, which is associated with subduction zones and represents the location where one tectonic plate is being forced beneath another. A real-world example of this type of volcanic activity can be found in the Cascades, a mountain range in western North America that extends from northern California to southern British Columbia, Canada.

The Cascades are characterized by a series of volcanoes formed as a result of the subduction of the Juan de Fuca Plate beneath the North American Plate. The volcanic activity in the Cascades, including famous volcanoes such as Mount St. Helens and Mount Rainier, is a prime example of the Benioff Wadati zone and the associated subduction zone volcanism.

Therefore, the correct option is (c).

To learn more about Benioff Wadati zone  here

https://brainly.com/question/32406410

#SPJ4

The complete question is:

The arrow labeld D in the above graphic is pointing to a _____. A real world example of this type of volcanic activity can be found in _______.

a) Subduction zone, Andes

b) Continental rift valley, East Africa

c)  Benioff Wadati zone, Cascades

d) Transform Fault, California

When sea ice melts, it uncovers dark water underneath that absorbs more sunlight than sea ice and leads to increased temperatures and more sea ice melting. This process is known as a ________________ feedback cycle that tends to make a system _______________.
positive; go out of control
positive; remain stable
negative; remain stable
negative; go out of control

Answers

The process described in the statement is an example of a positive feedback cycle that tends to make a system go out of control.

What is Positive feedback cycle

In a positive feedback cycle, when there is a change in one part of a system it results into a change in another part which amplifies the initial change.

In this case, the melting of sea ice results into an increased absorption of sunlight by the darker water, which in turn leads to more melting of sea ice. when this cycle continues and amplifies over time, it leads to further melting of sea ice and increase temperatures.

Learn more on positive feedback https://brainly.com/question/28271726

#SPJ4

Scientists often use the term 'super volcanic eruptions' to describe those eruptions that result in
short-term (1-2 years) cooling of global climate
formation of giant calderas
rapid subduction of oceanic plate in less than 1 month.
massive loss of lives (>100,000 casualties)

Answers

Super volcanic eruptions are exceptionally large volcanic eruptions that release a tremendous amount of magma, resulting in the formation of enormous volcanic craters called calderas.

These eruptions are characterized by the expulsion of massive volumes of ash, gases, and pyroclastic material into the atmosphere.

The term 'super' refers to the magnitude and scale of these eruptions, which are far more powerful and devastating compared to typical volcanic eruptions. Super volcanic eruptions can have significant global impacts, affecting the climate, environment, and even human populations.

While super volcanic eruptions can have indirect consequences such as short-term cooling of the global climate due to the injection of volcanic ash into the atmosphere, rapid subduction of oceanic plates, and massive loss of lives, these consequences are not defining characteristics of super volcanic eruptions. The primary defining feature is the formation of giant calderas.

Examples of super volcanic eruptions include the Toba eruption in Indonesia approximately 74,000 years ago and the Yellowstone eruption in the United States around 640,000 years ago.

In summary, the term 'super volcanic eruptions' refers to eruptions that lead to the formation of giant calderas, which are massive volcanic craters. These eruptions release vast amounts of magma and have significant global impacts.

Learn more about the volcanic eruptions:

brainly.com/question/30028532

#SPJ4

Which law or principle can you use to explain that the
sedimentary layers A – H were disturbed (tilted) by geological
events after their formation? Explain your answer

Answers

The principle of superposition can be used to explain that the sedimentary layers A-H were disturbed (tilted) by geological events after their formation.

According to this principle, in an undisturbed sequence of rock layers, the oldest layers are found at the bottom, and the youngest layers are found at the top.

In the case of the tilted sedimentary layers, if they were initially deposited in a horizontal position, any subsequent tilting or folding of the layers suggests that some geological event has occurred after their formation. This tilting could result from tectonic forces, such as the movement of Earth's crustal plates, or from the intrusion of igneous rocks.

By observing the relative positions and orientations of the sedimentary layers, geologists can deduce the sequence of geological events that have affected the rock layers over time. The principle of superposition, along with other principles and methods of stratigraphy, helps geologists interpret the geological history of an area and understand the processes that have shaped the Earth's crust.

To learn more about sedimentary layers  here

https://brainly.com/question/30488913

#SPJ4

On April 20, 2010, an explosion aboard the Deepwater Horizon, a drilling rig leased by the oil company BP, set off a blaze that killed 11 crew members. Two days later, it sank about 50 miles off the Louisiana coast and crude oil began gushing out of a broken pipe 5,000 feet below the surface. a) What role did water currents play in the environmental damage that occurred as a result along the Gulf Coast? b) What information do you think an oceanographer would need to know when determining where the oil would travel? c) How bad were the biological impacts (ex. animals, fisheries, habitats, etc...) to shoreline habitats or wildlife from the oil spill? (Your response must be 100 words at minimum for full credit)

Answers

Water currents played a significant role in the environmental damage caused by the Deepwater Horizon oil spill along the Gulf Coast.

a) The spill released a massive amount of crude oil and the movement of water currents influenced the spread and distribution of the oil. The currents also affected the dispersion and mixing of the oil, potentially impacting different depths and layers of the ocean.

b) To determine the oil's travel path, an oceanographer would need to consider various factors including knowledge of prevailing and secondary currents in the area, influence of wind patterns, which can affect surface drift. Additionally,and information about the oil's properties.

c) The Deepwater Horizon oil spill had significant biological impacts on shoreline habitats and wildlife along the Gulf Coast. The oil contamination posed a threat to various marine organisms, including fish, birds, marine mammals, and invertebrates. The spill highlighted the vulnerability of coastal habitats and the need for robust mitigation measures and environmental monitoring to minimize such devastating impacts.

Know more about Deepwater Horizon oil spill here

https://brainly.com/question/32033537

#SPJ4

BIM
Question 12 Not yet answered Points out of 1,00 Remove flag Numerous societal, technical, and demographic drivers will determine the development of BIM in the future. Select one: O True O False

Answers

True. Numerous societal, technical, and demographic drivers will indeed influence the development of Building Information Modeling (BIM) in the future.

BIM is a digital representation of the physical and functional characteristics of a building or infrastructure. Its implementation and evolution are influenced by various factors such as advancements in technology, industry standards, regulatory requirements, market demand, and the changing needs of the construction industry. As societal needs and expectations evolve, along with advancements in digital technologies and the increasing focus on sustainable and efficient construction practices, the development and ad of BIM will continue to be shaped by these drivers.

Learn more about technology here:

https://brainly.com/question/28288301

#SPJ11

Discuss (3 pages max) the metamorphism that resulted in the
formation of the Central Zone of the Limpopo Belt including the
rock types found in the entire belt

Answers

The Central Zone of the Limpopo Belt was formed during the Archaean period of the Precambrian era and is located in southern Africa. The Limpopo Belt is divided into three different zones, the Eastern, Central, and Western Zones.

The metamorphic event that formed the Central Zone of the Limpopo Belt is thought to have occurred between 3.2 and 2.9 billion years ago. During this time, sedimentary rocks, such as sandstones and mudstones, were buried beneath the earth's surface and subjected to extreme heat and pressure.

The rock types found in the Central Zone of the Limpopo Belt include gneiss, granulite, and migmatite. Gneiss is a metamorphic rock that forms when other rocks, such as granite or sedimentary rocks, are subjected to high heat and pressure.

To know more about Limpopo Belt visit:-

https://brainly.com/question/29482256

#SPJ11

Life of lakes: Which one of the following statements is true?
Most lakes will exist forever.
Succession is one important step in lake rejuvenation.
Plant succession usually happens through the lifetime of lakes.
One vegetation replaced by another vegetation is called plant extinction.

Answers

The true statement among the options provided is: Succession is one important step in lake rejuvenation.

What is Succession?

Succession refers to the process of ecological change in an ecosystem over time. In the context of lakes, succession plays a crucial role in their rejuvenation or natural development. Over time, lakes undergo a series of changes in their physical, chemical, and biological characteristics, leading to shifts in the dominant plant and animal communities.

During the process of lake succession, various stages or seral communities of vegetation can be observed. Initially, open water may be colonized by algae and other microorganisms.

Learn more about lake at https://brainly.com/question/30195777

#SPJ4

1- Compare and
contrast LIBOR with OIS rates. Could everyone explain more details.
Thanks.

Answers

LIBOR represents the interbank borrowing rate, while the OIS rate reflects the expected short-term risk-free rate based on overnight index swaps.

LIBOR (London Interbank Offered Rate) and OIS (Overnight Index Swap) are both commonly used interest rates in financial markets, but they serve different purposes. LIBOR is the average rate at which major London banks can borrow from each other in the international interbank market. It represents the cost of an unsecured short-term loan and is widely used as a benchmark for various financial contracts, such as loans, derivatives, and mortgages.

The OIS rate, on the other hand, is based on overnight index swaps, which are financial contracts in which parties exchange fixed-rate payments for floating-rate payments indexed in an overnight benchmark, such as the central bank's policy rate. The OIS ratio reflects market expectations for future short-term rates, with an emphasis on risk-free borrowing costs. In a nutshell, LIBOR is the interbank borrowing rate, while the OIS rate represents the expected short-term risk-free rate. 

Learn more about interbank:

https://brainly.com/question/33494513

#SPJ4

1. The temperature range over which metamorphism occurs is to. deg C.
2. pressure is equal in all directions and produced by the weight of overlying rocks (=overburden).
3. pressure is unequal and usually results from stresses along active plate boundaries.
4. This type of metamorphism occurs adjacent to fault planes:

Answers

The temperature range over which metamorphism occurs is typically from a few hundred to several hundred degrees Celsius.

How to explain the information

In metamorphism, pressure is not necessarily equal in all directions and is not solely produced by the weight of overlying rocks (overburden).

Pressure in metamorphism is often unequal and commonly results from the stresses exerted along active plate boundaries. These plate boundaries can experience intense tectonic forces, such as compression, shearing, and folding, which lead to the deformation and metamorphism of rocks in those regions.

The type of metamorphism that occurs adjacent to fault planes is called fault zone metamorphism or cataclastic metamorphism.

Learn more about temperature on

https://brainly.com/question/27944554

#SPJ4

Is
the following statement true? Movement of the earths
lithosphere(its rigid outer shell) unleashes earthquakes, power
volcanic eruptions, and lifts mountains.

Answers

Yes, the statement is true. The movement of the Earth's lithosphere, which is its rigid outer shell, is responsible for various geological phenomena such as earthquakes, volcanic eruptions, and the formation of mountains.

Instances of some geological phenomena

Earthquakes occur when there is a release of built-up energy along faults in the Earth's crust, which is part of the lithosphere. The movement of tectonic plates, which make up the lithosphere, can cause these faults to slip and result in seismic activity.

Volcanic eruptions also occur due to the movement of the Earth's lithosphere. Volcanoes are often located at plate boundaries or areas where there are hotspots in the Earth's mantle. The movement and interaction of tectonic plates can cause the release of magma from beneath the Earth's surface, leading to volcanic eruptions.

Learn more about lithosphere at

https://brainly.com/question/2855870

#SPJ4

Other Questions
A quadratic function may have one root, two roots, or no______ roots. Let L = {w {a + b}" | #b(w) is even}. Which one of the regular expression below represents L? pt) (a) (a*ba*b)* (b) a*(baba")" (c) a* (ba*b*)*a* (d) a*b(ba*b)"ba If the payout ratio is 0.40 and dividends are 40, then net income is Select one: O a. 80 O b. 100 O c. 120 O d. 160 What conculsion about Gilgamesh can be drawn from this passage Which of the following sentences is a contradiction? Select one: O O a. (q p) (p q) b. (q V p) (pq) c. None of the given choices. d. (p q) (q p) Which of the following statements about data breaches in 2019 isnottrue?A. According to the Identity Theft Resource Center, the number of breaches in 2019 increased by 17% from 2018.B. According to the Identity Theft Resource Center, the breaches exposed almost 165 million sensitive records, such as social security numbers and financial account data.C. According to the Identity Theft Resource Center, employee error was the leading cause of data breaches.D. According to the Identity Theft Resource Center, data breaches involving the business sector represented about 44% of all breaches. When we create an object from a class, we call this: a. object creation b. instantiation c. class setup d. initializer The data that an object contains and manipulates is more generally know as the _____ of the object.a. user data b. supplied data c. attributes d. origin data find the sum and express it in simplest form (-3x^3+4x^2+2) + (9x^3 Simplify the convolution representing an LTI system y(t) (hr) (t) and calculate the energy of y(t), where r(t) = and h(t) = u(t)u(t-1.5). Dust has particles with migration velocity of 0.15 m/s. For a total air flow of 65 m3/s, what must be the number of collecting plates in ESP each having area of 50 m2. Assume collection efficiency to be 95%. Determine the exact measure(s) of the angle , where 02. a. 10sec+2=18 {5} b. sin2+cos=0 {5} Write a program that performs the following operations: Prompt the user to enter an integer. If the integer is positive (or zero), the program should output the square of that number. If the number is negative the program should quit. The program should continue prompting the user for an integer until they enter a negative number which ends the program. 5. Write a program for creating zombie process. Task: We're creating an application to generate the Hoosier Lottery numbers, using a for loop and a while loop. You will have to think about how to generate random numbers between 1 and some upper limit, like 49... Create an algorithm and use this in your solution. As before, you can use console.log to log the number to the console. Part 1: Create a for loop that executes exactly 6 times. In the body of the loop, generate a random number between 1 and 49, inclusive. Save the random number to a string, using the same techniques we used for this week's example (times tables) When the loop exits, display the string in a heading on the web page. Part 2: Create a while loop that executes exactly 6 times. In the body of the loop, generate a random number between 1 and 49, inclusive. Save the random number to a string, using the same techniques we used for this week's example (times tables) When the loop exits, display the string in a heading on the web page. 8. Using the graph below, what is the solution for the system of linear equations shown?y=3x+8y=3x-4A. (8,-4)B. Infinitely many solutionsC. (3, 3)D. No solution G+ circle.cpp 1 #include "circle.h" 2 #include < 3 4 Circle::Circle() { 5 this->setRadius (MIN); 6 } 7 8 Circle::Circle(float r){ | this->setRadius (r); 9 10 } 11 12 Circle::~Circle() { 13 14 } 15 16 float Circle::getRadius () { return this->radius; 17 18 } 19 20 float Circle::getArea() { 21 22 NNHENGAM 23 24 25 26 27 28 29 30 return (M_PI) * this->radius * this->radius; float Circle::setRadius(float radius) { if (radius < MIN) { | std::cout I wo ships leave from the same port. One ship travels on a bearing of 157 at 20 knots. The second ship travels on a bearing of 247 at 35 knots. (1 knot is a speed of 1 nautical mile per hour.) a) How far apart are the ships after 8 hours, to the nearest nautical mile? b) Calculate the bearing of the second ship from the first, to the nearest minute. 1. Petroleum economic evaluation determined the A. Producible oil B. Production oil C. Developed oil D. Reserved oil 2. Capital expenditure is used in the calculation of before A. Net cash inflow B. Net cash outflows C. Tax cash flows D. Net cash flows A synchronous generator with a synchronous reactance of 0.8 p.u. is connected to an infinite bus whose voltage is 1 p.u. through an equivalent reactance of 0.2 p.u. The maximum permissible active power output is 1.25 p.u. A Compute the excitation voltage E. B The power output is gradually reduced to 1 p.u. with fixed field excitation. Find the new current and power angle d. C Compute the reactive power generated by the machine under the condition in B. In 7.0 s, a car accelerates uniformly from rest to a velocity at which its wheels are turning at 6.0 rev/s. If the tires of the car have a diameter of 42 cm, and they rolled on the ground without slipping, how far did the car go in those 7.0 s?