What product is formed when the compound is treated with Tollens reagent (Ag2O,NH4OH) ? With some compounds, no reaction occurs. If no reaction occurs, draw the reactant.

Compounds that can undergo an addition and elimination reaction mechanism are OH and OCH3 since they are the ones that have a nucleophilic site or a leaving group.

The compounds that can undergo an addition and elimination reaction mechanism are listed below: OH - It is a hydroxyl group and is a nucleophile, which means it has an electron pair available for donation. OCH3 - Methoxy group, also known as OCH3, is a leaving group.

Addition reactions occur when two or more reactants combine to form a single product. They typically involve unsaturated compounds like alkenes or alkynes, which have double or triple carbon-carbon bonds. Elimination reactions, on the other hand, involve the removal of elements from a reactant to create a more unsaturated product, typically forming a double bond.

OH: This group represents an alcohol functional group. Alcohols can undergo elimination reactions, such as dehydration, to form alkenes.
OCH: This seems to be an incomplete functional group, as it is missing a carbon or hydrogen. If it's meant to represent an ether functional group (OCH3 or OCH2R, where R is an alkyl group), ethers generally do not undergo addition or elimination reactions.

In conclusion, without further information about compounds A, B, C, D, and E, we can only determine that a compound containing an OH functional group (an alcohol) can undergo elimination reactions, while the given OCH functional group does not undergo addition or elimination reactions.

To know more about nucleophilic site, refer here:

https://brainly.com/question/24297177#

#SPJ11

The molality of a solution that contain 90. 0g of benzoic acid in 350 ml of water is 2.102 mole / kg.

The molarity of a solution is defined as the number of moles of solute dissolved in one liter of solution. Molarity can be expressed as the ratio of a solvent's moles to a solution's total liters. Both the solute and the solvent are part of the solution in calculating the molarity. It is the ratio of the solute moles to the solvent kilograms.

Molarity = Number of moles of solute Volume of solution in liter.

moles of C6H5COOH = 90.0 g / 122.12g/mole

                                     = 0.736 mole

Now we have to calculate the mass of water.

            = (350 ml) (1 g/ml) * 1L/ 1000ml

            = 0.350 kg

Molarity =  0.736 mole/  0.350 kg

             = 2.102 mole / kg.

To learn more about Molarity

https://brainly.com/question/30404105

#SPJ4

Ion channels are classified as membrane transport proteins. Channels discriminate by size and charge.  

What are transport membrane proteins?

Transport membrane proteins are proteins that aid in the movement of molecules across the membrane. These transport membrane proteins come in various forms and serve various functions, including regulating molecules' passage. As a result, they play a vital role in cell homeostasis.

What are ion channels?

Ion channels are pore-forming proteins found in the membranes of all cells, which facilitate the diffusion of ions down their electrochemical gradient across the plasma membrane.

What is diffusion?

Diffusion is the random movement of particles from an area of higher concentration to an area of lower concentration. It is the primary mechanism of particle transport in cells.

How does ion diffusion work?

Ion diffusion is a type of passive transport that occurs spontaneously down an electrochemical gradient, from an area of high concentration to an area of low concentration, through a semipermeable membrane. It is facilitated by ion channels, which are membrane transport proteins that allow ions to move across the plasma membrane down their electrochemical gradient.

The charge and size of the ion channels determine the molecules that can pass through the membrane via these channels. Small ions like Na+ and K+ can pass through the ion channels easily, while larger ions cannot.

Na+ channels also permit the passage of K+ ions but not Mg2+ or Cl-.

Therefore, in addition to Na+, K+ is expected to freely diffuse through Na+ channels.

Answer: c) K+.

To know more about the ion channel https://brainly.com/question/29415412

#SPJ11

Answer: a) The identity of element X is Xenon. b) There are 83 neutrons in element X.

In order to identify the element X, let's first find its atomic number. The number of electrons in the neutral atom is equivalent to the atomic number of the particular element. The ion of element X has a total of 54 electrons, so X has 54 protons, implying that X's atomic number is 54. The atomic number of a chemical element is the number of protons in its atomic nucleus.

b) The number of neutrons in an atom is equal to the mass number minus the atomic number of the element. Thus, the number of neutrons in element X can be determined by subtracting 54 from 137, which gives 83 neutrons inside atom of elements.

Know more about Xenon here:

https://brainly.com/question/5516586

#SPJ11

Functionalized hydrocarbons is not a subfamily of the hydrocarbon family. Therefore, the correct option is option C.

A hydrocarbon is an organic molecule in organic chemistry that is made completely of hydrogen and carbon. Examples of group 14 hydrides include hydrocarbons. The majority of hydrocarbons are colourless and hydrophobic; they occasionally have a mild odour that is comparable to that of petrol or lighter fluid. They can be gases (like methane and propane), liquids (like hexane and benzene), low melting solids (like paraffin wax and naphthalene), or polymers (like polyethylene and polystyrene). They also occur in a wide variety of chemical configurations and phases. Functionalized hydrocarbons is not a subfamily of the hydrocarbon family.

Therefore, the correct option is option C.

To know more about hydrocarbon, here:

https://brainly.com/question/32019496

#SPJ12

When a strong acid such as HCl is added to the carbonic acid buffer system, carbonic acid is converted into bicarbonate. The correct option is (A).

The carbonic acid buffer system is a mechanism that helps to maintain the pH of blood within the normal range. The carbonic acid buffer system works by regulating the concentrations of bicarbonate (HCO3-) and carbonic acid (H2CO3) in the blood.

When a strong acid like hydrochloric acid (HCl) is added to the carbonic acid buffer system, carbonic acid is converted into bicarbonate.

The bicarbonate is then able to bind with hydrogen ions (H+) from the strong acid, preventing a significant decrease in the blood pH.

This reaction can be represented as follows:

H2CO3 + HCl → HCO3- + H2O + Cl

This reaction is a simple equilibrium reaction. As more HCl is added, the concentration of bicarbonate increases as it is produced in the reaction. This increase in bicarbonate concentration helps to buffer the excess hydrogen ions from the strong acid, reducing its effect on the pH of blood.

Therefore, the answer to the given question is option A, carbonic acid is converted into bicarbonate.

To know more about buffer system, refer here:

https://brainly.com/question/27548311#

#SPJ11

The city of Pripyat, Ukraine, located approximately 2.5 miles away from the Chernobyl Nuclear Power Plant, was completely evacuated following the nuclear disaster of April 26th, 1986.

This city, which was home to nearly 50,000 residents at the time, remains a ghost town today. The Chernobyl Nuclear Power Plant was in the process of conducting a safety test at the time of the disaster, which involved shutting down the reactor and ensuring its safety systems were working. Unfortunately, a flaw in the reactor caused a chain reaction and led to a large amount of radiation being released into the environment.

The fallout from the disaster was massive, and the nearby city of Pripyat was severely affected. In response, the Ukrainian government ordered the entire city to be evacuated immediately. Over the course of three days, 50,000 residents were relocated to safer areas, leaving the city a ghost town. Today, Pripyat is still considered uninhabitable and is a popular tourist attraction. Tourists can explore the deserted city and observe the effects of the disaster firsthand.

To know more about nuclear power plant click on below link :

https://brainly.com/question/4246037#

#SPJ11

The decomposition of hydrogen peroxide into water and oxygen is an exothermic reaction, and its value can be calculated using the enthalpy change. The enthalpy change is the amount of energy released or absorbed during a chemical reaction. In this reaction, the enthalpy change is -196 kJ, which means that the reaction releases 196 kJ of

energy when 2 moles of hydrogen peroxide are decomposed into water and oxygen at constant pressure.

Now, we need to calculate the value of q in kJ when 2.00 g of hydrogen peroxide is decomposed at constant pressure. The molar mass of hydrogen peroxide (H2O2) is 34.0147 g/mol. So, the number of moles of hydrogen peroxide can be

calculated as follows:

Number of moles of H2O2 = mass of H2O2 / molar mass of H2O2
Number of moles of H2O2 = 2.00 g / 34.0147 g/mol
Number of moles of H2O2 = 0.05878 mol

As per the balanced chemical equation, 2 moles of hydrogen peroxide are required to produce 2 moles of water and 1 mole of oxygen. So, the number of moles of water and oxygen produced can be calculated as follows:

Number of moles of H2O = 2 x 0.05878 mol = 0.11756 mol
Number of moles of O2 = 1 x 0.05878 mol = 0.05878 mol

The enthalpy change is -196 kJ per 2 moles of hydrogen peroxide. So, the enthalpy change per 1 mole of hydrogen peroxide can be calculated as follows:

Enthalpy change per 1 mole of H2O2 = -196 kJ / 2 mol
Enthalpy change per 1 mole of H2O2 = -98 kJ/mol

For more similar questions on topic hydrogen peroxide

brainly.com/question/11743179

#SPJ11

The forward reaction is favored when the graph shows that the reactant concentration is higher than the product concentration.

To determine which reaction is favored, examine the graph and look at the concentrations of reactants and products at equilibrium. If the reactant concentration is higher, the forward reaction is favored. Conversely, if the product concentration is higher, the reverse reaction is favored.

A graph can help you visualize the reactants and products of a reaction at equilibrium. The y-axis of the graph typically indicates the concentration of the reactants or products, and the x-axis of the graph indicates the reaction rate.

At equilibrium, the reaction rate is 0, meaning that the reactants and products are neither increasing nor decreasing in concentration. By looking at the concentrations of the reactants and products at equilibrium on the graph, you can determine which reaction is favored.

If the reactant concentration is higher than the product concentration, then the forward reaction is favored. This means that the forward reaction occurs more quickly than the reverse reaction when the concentrations of the reactants and products are equal.

Conversely, if the product concentration is higher than the reactant concentration, then the reverse reaction is favored.

To know more about forward reaction click on below link:

https://brainly.com/question/8592296#

#SPJ11

Answer: The initial concentration of Fe3 in the mixture is 8.95 mL.

The initial concentration of Fe3 in the mixture can be calculated using the equation: c1V1 + c2V2 + c3V3 = c, where c is the total molarity, V1, V2, and V3 are the volumes of the respective solutions, and c1, c2, and c3 are the initial molarities.

In this case, we have 20.0 ml of a 0.0800 M HNO3, 35.0 ml of a 0.0500 M KSCN, and 80.0 ml of a 0.0700 M Fe(NO3)3.

We can then calculate the initial concentration of Fe3 in the mixture as follows:

c = (0.0800 M * 20.0 mL) + (0.0500 M * 35.0 mL) + (0.0700 M * 80.0 mL)

c = (1.6 mL) + (1.75 mL) + (5.6 mL)

c = 8.95 mL

Therefore, the initial concentration of Fe3 in the mixture is 8.95 mL.


Learn more about initial concentration here:

https://brainly.com/question/14498400#


#SPJ11

When 2-bromohexane is treated with a strong base the alkenes that would result is given as 1

When 2-bromohexane is treated with a strong base, such as sodium ethoxide (NaOEt) or sodium hydroxide (NaOH), it undergoes elimination reaction (also called dehydrohalogenation) to form different alkenes.

The product(s) of the reaction depend on the position of the β-carbon (the carbon next to the bromine atom) that undergoes deprotonation. Since there are two β-carbons in 2-bromohexane, two different alkenes can be formed.

Read more on alkenes here:https://brainly.com/question/29120960

#SPJ1

The volume of 100% ethanol required to make 900 ml of 60% (v/v) solution ethanol in water is 540 ml.

To calculate the volume in ml of 100% ethanol required to make 900 ml of 60% (v/v) solution ethanol in water, you will need the following formula:

C1V1 = C2V2

Where C1 is the initial concentration of the solution (in this case, 100%), V1 is the initial volume of the solution (unknown), C2 is the final concentration of the solution (in this case, 60%), and V2 is the final volume of the solution (900 ml).

To solve for V1, we can rearrange the formula as follows:

V1 = (C2V2) / C1

Plugging in the values, we get:

V1 = (0.60 * 900) / 1.00

V1 = 540 ml

Therefore, you will need 540 ml of 100% ethanol to make 900 ml of a 60% (v/v) solution of ethanol in water.

To know more about ethanol, refer here:

https://brainly.com/question/30263729#

#SPJ11

The substance with a pH that is lower than bleach but higher than egg whites would have a pH between 8 and 12.

pH is a measure of the acidity or basicity (alkalinity) of a solution. It is measured on a scale from 0 to 14, with a pH of 7 considered neutral. pH values below 7 indicate acidity, while pH values above 7 indicate basicity.

Household bleach has a pH of around 12-13, while egg whites have a pH of around 7-8. Therefore, the substance with a pH that is lower than bleach but higher than egg whites would have a pH between 8 and 12.

Substances with a pH in this range include baking soda (pH around 9), milk of magnesia (pH around 10), and ammonia solution (pH around 11). However, without further information, it is impossible to determine the exact substance with certainty.

Learn more about pH here: https://brainly.com/question/26424076

#SPJ1

The statement that "when two solutions containing ions as solutes are combined and a reaction occurs, it is always a single-replacement reaction" is False.

When two solutions containing ions as solutes are combined and a reaction occurs, it is not always a single-replacement reaction.

The type of reaction that will occur depends on the reactants and the conditions of the reaction.

For example, if two solutions containing different metal ions are mixed together, a double-replacement reaction may occur, in which two ionic compounds are formed.

Similarly, a precipitation reaction may occur if the combination of the two solutions produces an insoluble product.

In general, single-replacement reactions involve one element replacing another element in a compound, and occur when one of the reactants is an elemental solid, such as a metal.

To know more about solutes, refer here:

https://brainly.com/question/7932885#

#SPJ11

The number of unique sets of 4 quantum numbers to represent the electrons in the 4f subshell is 70.

The four quantum numbers that make up an electron's set are the:

(i) principal quantum number (n)

(ii) angular momentum quantum number (l)

(iii) magnetic quantum number (m_l)

(iv) spin quantum number (m_s).

Each of these electrons has a limited range of the above numbers in their respective shell.

The principal quantum number for all the electrons in the 4f subshell is 4.

The angular momentum quantum number has a value of 3 corresponding to the f subshell.

The magnetic quantum number has a range of -3 through +3 for the electrons in the f subshell.

The spin quantum number has a range of -1/2 or +1/2.

Even if the principal quantum number and angular momentum quantum number are the same for all the electrons, the other two factors contribute to each electron having a unique set of quantum numbers.

Therefore, when these four quantum numbers are combined, they make up 70 unique sets of 4 quantum numbers that can be used to represent the electrons in the 4f subshell, in accordance with the Pauli Exclusion Principle.

To know more about quantum numbers, refer here:

https://brainly.com/question/16977590#

#SPJ11

At room temperature, ice melting, salt dissolving in water, hot coffee cooling down, and hot tea getting hotter are all spontaneous processes. Silver tarnishing, however, is not a spontaneous process at room temperature.

Spontaneity is defined as a procedure that happens without external impact. The procedures that occur without any interference are known as spontaneous procedures, and the ones that occur only with external influence are called non-spontaneous procedures. The distinction between spontaneous and non-spontaneous processes is the focus of thermodynamics. Processes that happen on their own are referred to as spontaneous.

Examples of spontaneous processes are Ice melting, Salt dissolving in water, and hot tea getting hotter.

An example of a non-spontaneous process is Silver tarnishing.

The conditions of the spontaneous processes are ΔS > 0ΔH < 0ΔG < 0 at room temperature.

to know more about the Spontaneous process:

https://brainly.com/question/1109991

#SPJ11

A group 2A metal will form a stable ion with a charge of +2. Examples of group 2A metals include magnesium (Mg), calcium (Ca), and strontium (Sr).

A group 3A metal will form a stable ion with a charge of +3. Examples of group 3A metals include boron (B), aluminum (Al), and gallium (Ga).

For more questions like charge visit the link below:

1. A metal of group 2A, plus

2. A metal from group 3A, - 3+

A What is charge?

Both positive and negative charges are possible. We are aware that a positive charge is created when a species has more protons than electrons. A negative ion, on the other hand, is one that has more electrons than protons.

We now understand that metals mostly produce positive ions. The group that the metal belongs to in the periodic table determines how much charge is on the ions.

The ions' charges are as follows:

1. A metal of group 2A, plus

2. A metal from group 3A, - 3+

https://brainly.com/question/28531714

#SPJ11

The chemical weathering process known as oxidation would be most effective in the breakdown of pyroxenes, quartz, calcite, and feldspar Earth minerals.

Oxidation is a chemical reaction between oxygen and other substances in the environment which causes a breakdown of the Earth minerals, resulting in their decomposition. Halite, or sodium chloride, is an example of a mineral that is not affected by the oxidation process.

Learn more about the chemical weathering process at  brainly.com/question/9621344

#SPJ11

The given statement, Group 13 nitrides are isostructural and exhibit the layered graphite structure is true because Group 13 nitrides have a hexagonal close-packed layer of nitrogen atoms, with alternating layers of boron, aluminum, or gallium atoms, resulting in a layered structure that resembles graphite due to comparable atomic radii and electronegativities of the elements.

Group 13 nitrides, such as boron nitride (BN), aluminum nitride (AlN), and gallium nitride (GaN), are isostructural and exhibit the layered graphite structure. The basic building block of the crystal structure is a hexagonal close-packed layer of nitrogen atoms, with alternating layers of boron, aluminum, or gallium atoms. This results in a layered structure that resembles that of graphite. The similarities between the crystal structures of these materials can be attributed to the comparable atomic radii and electronegativities of the Group 13 elements.

To know more about nitrides, here

brainly.com/question/16501916

#SPJ4

--The complete question is, Group 13 nitrides are isostructural and exhibit the layered graphite structure group of answer choices true false.--

Partial, older osteons are cylindrical structures that are found between newer, more complete osteons. These structures, also known as fragments,

consist of concentric layers of lamellae surrounding a central canal, or Haversian canal.

The lamellae and the Haversian canal are formed during the process of osteon remodeling, which involves the removal of old osteons and their replacement with new ones.

The fragments of old osteons that remain in the matrix between new osteons are referred to as “intermediate,” “intermediate osteons,” or “partial osteons.”

They can be distinguished from the newer, complete osteons by their decreased size and lack of a central Haversian canal.

Partial osteons are important for a number of reasons. They help maintain the structural integrity of the bone, provide additional strength and stability, and increase the bone’s resistance to compressive and tensile stresses.

Partial osteons also act as an area of interface between two different age groups of osteons, allowing them to resist shear forces.

Finally, the presence of partial osteons in the bone matrix may increase the rate of healing after fracture or trauma.

to know more about osteons refer here:

https://brainly.com/question/30327119#

#SPJ11

The red line shows that at 70 °C, 200 g of water will be saturated with about 140 g or potassium nitrate.

This mass of a compound would be divided by mass of the solvent, and then divided by 100 g to determine its solubility. This calculation will give the solubility of the substance in g/100g.

The curves demonstrate that when temperature rises, solubility of any and all three solutes increases. The most noticeable increase in solubility is for potassium nitrate, which goes from about 30 g per 100 g of water from over 200 grams per 100 grams of water.

To know more about potassium visit:

https://brainly.com/question/13321031

#SPJ1

The partial pressure of F2 in a mixture of gases where the total pressure is 1.00 atm is 300 torr. The mole fraction is 0.149.

We need to calculate the mole fraction. The mole fraction is defined as the ratio of the number of moles of a component in a mixture to the total number of moles of all components in the mixture.The partial pressure of F2 is given to be 300 torr.

The total pressure is given to be 1.00 atm.

Partial pressure is the pressure exerted by one of the components of the mixture. It is defined as the product of the mole fraction and the total pressure.

The formula for mole fraction is:

nF2 / ntotal = partial pressure of F2 / total pressure

The mole fraction of F2 is given by:

nF2 / ntotal = (300 torr) / (1.00 atm) = 0.316

This is the mole fraction of F2. We need to find the mole fraction of the mixture.

The mole fraction of the mixture is given by:

nF2 + nO2 / ntotal

= partial pressure of F2 + partial pressure of O2 / total pressurenO2 / ntotal

= (1.00 atm - 300 torr) / (1.00 atm)

= 0.70nF2 / ntotal + 0.70 = 1.00nF2 / ntotal

= 0.30

The mole fraction of F2 is:nF2 / ntotal = 0.30

The mole fraction of the mixture is:

nF2 + nO2 / ntotal = nF2 / ntotal + nO2 / ntotal = 0.30 + 0.70 = 1.00

Therefore, the mole fraction of the mixture is 1.00. The mole fraction of F2 is 0.30. The mole fraction of O2 is 0.70.

The formula of a compound composed of 6.00 g of carbon and 2.01 g of hydrogen is CH₄.

The atomic weight of carbon is 12.01 g/mol, whereas hydrogen's atomic weight is 1.01 g/mol.

The number of moles of carbon present in the compound = 6.00 g ÷ 12.01 g/mol = 0.499 mol.

The number of moles of hydrogen present in the compound = 2.01 g ÷ 1.01 g/mol = 1.99 mol.

To make the quantity of carbon and hydrogen equal, both quantities should be divided by 0.499. As a result, the following ratio is obtained:-

Carbon: 0.499 mol/0.499 mol = 1

Hydrogen: 1.99 mol/0.499 mol = 4

The ratio of carbon to hydrogen is 1:4, which corresponds to the formula CH₄. Thus, the formula of the compound is CH₄.

Learn more about compound: https://brainly.com/question/704297

#SPJ11

Answer: 0.25 moles

Explanation:

To determine the number of moles of sodium sulfate that reacted, we need to first identify the limiting reagent in the reaction between barium nitrate and sodium sulfate. The balanced chemical equation for the reaction is:

Ba(NO3)2 + Na2SO4 → BaSO4 + 2NaNO3

The stoichiometry of the reaction tells us that one mole of barium sulfate is produced for every mole of sodium sulfate that reacts. Therefore, we can calculate the number of moles of sodium sulfate that reacted by dividing the mass of barium sulfate produced by its molar mass:

43.5 g BaSO4 × (1 mol BaSO4/233.4 g BaSO4) = 0.186 mol BaSO4

Since one mole of sodium sulfate reacts with one mole of barium sulfate, the number of moles of sodium sulfate that reacted is also 0.186 mol.

However, this is the number of moles of barium sulfate that was formed. To determine the number of moles of sodium sulfate that reacted, we need to use the stoichiometry of the balanced chemical equation. The ratio of the coefficients of sodium sulfate to barium sulfate in the balanced equation is 1:1. Therefore, the number of moles of sodium sulfate that reacted is also 0.186 mol.

The term mole concept is used here to determine the moles of sodium sulfate reacted. The moles of sodium sulfate formed from 43.5-grams of barium sulfate is 0.186 moles.

One mole of a substance is defined as that quantity of it which contains as many entities as there are atoms exactly in 12 g of carbon - 12. The formula used to calculate the number of moles is:

Number of moles = Given mass / Molar mass

Here the balanced equation is:

Ba(NO₃)₂ + Na₂SO₄ → BaSO₄ + 2NaNO₃

The stoichiometry of the reaction tells us that one mole of barium sulfate is produced for every mole of sodium sulfate that reacts. Therefore, we can calculate the number of moles of sodium sulfate that reacted by dividing the mass of barium sulfate produced by its molar mass:

43.5 g BaSO4 × (1 mol BaSO4/233.4 g BaSO4) = 0.186 mol BaSO4

To know more about mole concept, visit;

https://brainly.com/question/19730733

#SPJ2

The pressure exerted by oxygen gas, O₂, given that 90% of the total gas pressure is exerted by the nitrogen, is 0.5 atm

The following data were obtained from the question:

The pressure exerted by oxygen gas can be obtained as illustrated below:

Pressure exerted by oxygen gas = (percentage of oxygen gas / total percent) × total pressure

Pressure exerted by oxygen gas = (10 / 100) × 5

Pressure exerted by oxygen gas = 0.5 atm

Thus, we can conclude that the pressure exerted by oxygen gas is 0.5 atm

Learn more about partial pressure:

https://brainly.com/question/15577259

#SPJ1

For each bond, there are two arrows that indicate the direction of bond polarity. The arrow represents the more electronegative atom, and it points to the partially negative end of the bond. The arrow points to the more electronegative element, and the partially positive end of the bond.

For example, in the hydrogen chloride (HCl) molecule, the more electronegative atom is chlorine, with an electronegativity of 3.16. Hydrogen, on the other hand, has an electronegativity of 2.2. As a result, the bond is polarized, and the electron density is shifted towards the chlorine atom. Therefore, the polarity direction of the H-Cl bond will be: H → Cl.

Bond polarity is essential to chemistry because it influences the way atoms interact with one another, the formation of chemical compounds, and the resulting properties. To determine the direction of bond polarity in a chemical formula, follow these steps:

Identify the two atoms involved in the bond. Determine the electronegativity values of both atoms. You can find these values in an electronegativity table or chart. Compare the electronegativity values. The atom with the higher electronegativity will have a stronger pull on the shared electrons, making it the more electronegative end of the bond.

Draw an arrow from the less electronegative atom (partial positive charge) to the more electronegative atom (partial negative charge). This arrow indicates the direction of bond polarity. This implies that the arrow that represents the bond polarity direction is from the less electronegative atom to the more electronegative atom.

Remember, the arrow always points towards the more electronegative atom in the bond.

Complete question: For Each Bond, Select The Arrow That Indicates The Direction Of Bond Polarity. F-CH3 H3C-NH2 Br—MgCH3

To know more about bond polarity, refer here:

https://brainly.com/question/15099999#

#SPJ11

The mass of a glass marble, which is 3150 mg, is 0.315 centigrams. Therefore, the correct option is 3.15 cg.

A type of rock that is created from metamorphic rock composed mainly of carbonate minerals, particularly calcite or dolomite, is known as marble.

Marble is often used as a building material, and it has been used in sculptures for thousands of years. Marble has also been used for flooring, wall coverings, and countertops, among other things.

Marble is resistant to moisture, which makes it ideal for use in bathrooms and kitchens. It's also a great heat-resistant material, which is why it's used in fireplace surrounds and other applications where heat is present.

The marble surface is created by polishing or honing a marble slab. Honing roughs the surface of the stone, while polishing shines it to a high gloss.

Because of its visual appeal, durability, and ease of maintenance, marble is often used in high-end homes and commercial buildings.

It has a smooth texture that feels cool to the touch, making it ideal for hot climates because it keeps surfaces cool.

The substance is well-known for its attractive appearance, and it is frequently used in bathrooms and spas for its aesthetic

A metric unit of mass equal to one-hundredth of a gram (or 10−5 kilogram) is known as a centigram (cg). When determining the weight of objects or ingredients, the centigram is frequently used.

This unit is equal to 0.01 grams in the metric system. The abbreviation "cg" stands for centigrams. To convert a weight from milligrams to centigrams, simply move the decimal point two places to the left.

The formula for converting milligrams to centigrams is as follows: 1 milligram = 0.01 centigrams. As a result, the mass of a glass marble that weighs 3150 mg is equal to 0.315 centigrams.

to know more about marble refer here:

https://brainly.com/question/29287929#

#SPJ11

The dashed lines in the illustration of the transition state of a reaction between BrCH3 and OH- represent partial bond formation and bond breaking.

The transition state is the highest energy point in a chemical reaction, where the reactants are transformed into products. In this transition state, the reactants are in a state of instability and are subject to significant energy changes. The transition state is the state at which the energy of the reactants is highest. When the reactants react and form products, the energy is decreased. The transition state is the point at which the reaction barrier must be crossed for the reaction to proceed.

The dashed lines in the illustration represent the partial bond formation and bond breaking that occur during the transition state. The bond formation is represented by the dashed lines going toward the Br and O atoms, which indicates that these atoms are beginning to share electrons. Meanwhile, the dashed lines going away from the Br-C and C-O atoms indicate the bond breaking that is occurring during the reaction. In general, the dashed lines represent the changing bond lengths and bond energies that are occurring during the transition state. This depiction of the transition state is an important tool for chemists to understand how reactions occur and how they can be optimized. Understanding the mechanism of a reaction can help scientists design more efficient and effective reactions, which can be used to synthesize a wide variety of compounds.

Know more about transition state   here:

https://brainly.com/question/30835920

#SPJ11