what mass of nitric acid, in grams, can be made from 481 g of ammonia? express your answer with the appropriate units.

Answer:

You need to dissolve 16.988 g of AgNO3 in enough water to make a final volume of 1.0 L to make a 0.1 M solution of AgNO3.

Explanation:

To make a 1.0 L of a 0.1 M solution of AgNO3, you need to know the molar mass of AgNO3, which is:

Ag = 107.87 g/mol

N = 14.01 g/mol

O = 16.00 g/mol (there are three O atoms, so 3 x 16 = 48.00 g/mol)

Total = 169.88 g/mol

Next, you need to calculate the mass of AgNO3 required to make a 0.1 M solution in 1.0 L of water:

0.1 moles/L * 1.0 L = 0.1 moles

Mass = moles x molar mass

Mass = 0.1 moles x 169.88 g/mol

Mass = 16.988 g

Therefore, you need to dissolve 16.988 g of AgNO3 in enough water to make a final volume of 1.0 L to make a 0.1 M solution of AgNO3.

The solubility of KHT (solid) in pure water compared with the solubility of KHT (solid) in a 0.1 M KCl solution is predicted to be higher in the 0.1 M KCl solution. This is because the KCl solution has a higher ionic strength, increasing the solubility of ionic compounds like KHT.

Let's understand this in detail:

What is solubility?

Solubility is defined as the ability of a substance to dissolve in a particular solvent under certain conditions. It measures the maximum amount of solute that can be dissolved in a given amount of solvent at a particular temperature, pressure, and other conditions.

Solubility of KHT in pure water:

KHT (Potassium hydrogen tartrate) is a weak acid salt that has low solubility in pure water. The solubility of KHT in pure water is affected by various factors such as temperature, pH, and pressure. The solubility of KHT in pure water is around 4.4 g/L at room temperature.

Solubility of KHT in 0.1 M KCl solution: The solubility of KHT in a 0.1 M KCl solution is predicted to be higher than in pure water. KCl is an ionic salt dissociating in water to produce K+ and Cl- ions. The presence of KCl increases the ionic strength of the solution. This ionic strength improves the solubility of other ionic compounds, such as KHT. KHT has a higher solubility in a 0.1 M KCl solution than in pure water due to this reason.

#SPJ11

Learn more about solubility: Explain how you would find the solubility of a solute https://brainly.com/question/23946616

The isotope that contributed the greater activity to the radiation cloud is I-131.

The isotopes that contributed to the radioactivity of the cloud were mostly short-lived isotopes, and hence the isotopes with longer half-lives like Cesium-137 did not contribute much to the activity. Iodine-131 is one such short-lived isotope that had a half-life of 8.1 days.Iodine-131 has an atomic number of 53, and hence it is a radioactive isotope of iodine. The isotope was emitted into the environment as a result of the Chornobyl disaster.

The isotope was a cause of worry as it is readily absorbed by the body and can accumulate in the thyroid gland causing cancer in the long run. The other isotopes that contributed to the radioactivity of the cloud include strontium-90, cesium-134, and cesium-137.

Read more about the isotope:

https://brainly.com/question/14220416

#SPJ11

The initial pH of the titration is 2.50 and the final pH of the titration is: -1.67.

To calculate the pH for each case in the titration of 50.0 mL of 0.210 M HClO (aq) with 0.210 M KOH (aq), you must first use the ionization constant for HClO. The ionization constant for HClO is equal to 1.5 x 10-2. Now, you can calculate the pH of the titration.

At the beginning of the titration, the pH can be determined by the initial concentration of HClO (0.210 M). Since HClO is a weak acid, it partially dissociates in water, releasing hydrogen ions. The [H+] is equal to the HClO initial concentration multiplied by the ionization constant:  [tex][H+] = 0.210 x 1.5 x 10-2 = 3.15 x 10-3[/tex]

The pH can be determined by the negative logarithm of the [tex][H+], or pH = -log[H+][/tex].  So, the initial pH of the titration is [tex]-log (3.15 x 10-3) = 2.50.[/tex]

As the titration proceeds, the pH will increase due to the addition of KOH, a strong base. The final pH of the titration can be calculated in the same manner. At the equivalence point, the [H+] is equal to the KOH initial concentration multiplied by the ionization constant:[tex][H+] = 0.210 x 1 = 0.210.[/tex]

The pH of the equivalence point is [tex]-log (0.210) = -1.67.[/tex]  To summarize, the initial pH of the titration is 2.50 and the final pH of the titration is -1.67.

To know more about titration refer here:

https://brainly.com/question/2728613#

#SPJ11

The atomic mass of Li is 6.94 amu.

Li has two natural isotopes: Li-6 (6.015 amu) and Li-7 (7.016 amu). The atomic mass of element Li can be calculated given the abundance of Li-7 is 92.5%. The correct answer is 6.94 amu.Atomic mass is defined as the mass of an atom of an element. It is the sum of the masses of the protons and neutrons present in the atomic nucleus. The atomic mass is usually given in atomic mass units (amu) and is measured using mass spectrometry. Atomic mass is also known as atomic weight.The atomic mass of Li can be calculated as follows:atomic mass of Li = (abundance of Li-6 × atomic mass of Li-6) + (abundance of Li-7 × atomic mass of Li-7)Given,Abundance of Li-6 = 100% - 92.5% = 7.5%Abundance of Li-7 = 92.5%Atomic mass of Li-6 = 6.015 amuAtomic mass of Li-7 = 7.016 amuSubstitute the values in the formula to obtain the atomic mass of Li.atomic mass of Li = (0.075 × 6.015) + (0.925 × 7.016)= 0.45113 + 6.4914= 6.94253≈ 6.94 amu Therefore, the atomic mass of Li is 6.94 amu. An atom is composed of electrons, protons, and neutrons. An atom with a specific number of protons in its nucleus is referred to as an element. A variety of isotopes with different masses can be produced by different atoms of the same element. Naturally occurring isotopes are referred to as natural isotopes.

Learn more about Atomic mass

brainly.com/question/5661976

#SPJ11

Answer: NaCl: Sodium chloride

MgO: Magnesium oxide

CO: Carbon monoxide (Note: this is a covalent compound, not an ionic compound)

CO₂: Carbon dioxide (Note: this is a covalent compound, not an ionic compound)

NaF: Sodium fluoride

The unit of measurement for a surface area that has degrees Fahrenheit as the height and time as the width would be square degrees Fahrenheit x time.

Surface area is a measurement of the total area that the surface of an object occupies. The surface area is measured in square units. If the surface of an object is rectangular or square, it is calculated by multiplying the length of the object by the width of the object. For the curved surfaces, the formula for the surface area is complicated. However, the concept of square units remains the same for curved surfaces.

Fahrenheit is a unit of temperature that is used to measure the temperature of an object. This is used primarily in the United States and other countries that have adopted the Imperial system of units. It is based on a scale of 180 degrees between the freezing and boiling points of water, where the freezing point is 32°F and the boiling point is 212°F.

To learn more about Fahrenheit; https://brainly.com/question/30391112

#SPJ11

Answer: the formula 2n2 :)

Explanation: To calculate the maximum number of electrons in each energy level, the formula 2n2 can be used, where n is the principal energy level (first quantum number). For example, energy level 1, 2(1)2 calculates to two possible electrons that will fit into the first energy level.

I hope it helped! :)

The LUMO for the reaction when an ester is mixed with [tex]LiNHCH_{3}[/tex] is D. C-O π* bond.

In the SNAc (nucleophilic acyl substitution) mechanism, the nucleophile (LiNHCH_{3}) attacks the carbonyl carbon of the ester, and the LUMO in this reaction is the lowest unoccupied molecular orbital, which is the C-O π* bond.

To know more about SNAc Mechanism :

https://brainly.com/question/28383861

#SPJ11

The mole fraction of CO₂ in a solution made up of 2 mL of 0.002 M solution of CO₂ and 8 mL of 0.002 M solution of CN⁻ is 0.2.

The mole fraction of a solute in a solution is defined as the amount of that solute divided by the total number of moles present in the solution. It is the most commonly used concentration unit for mixing gases and solutions.

The mole fraction is given by:

mole fraction of component i = number of moles of component i / total number of moles in the solution

For the given solution made up of 2 mL of 0.002 M solution of CO₂ and 8 mL of 0.002 M solution of CN⁻, we can calculate the mole fraction of CO₂ as follows:

A number of moles of CO₂ in 2 mL of 0.002 M solution = 0.002 mol/L × (2 mL/1000 mL) = 0.000004 mol

A number of moles of CN⁻ in 8 mL of 0.002 M solution = 0.002 mol/L × (8 mL/1000 mL) = 0.000016 mol

Total number of moles in the solution = 0.000004 mol + 0.000016 mol = 0.00002 mol

Mole fraction of CO₂ = 0.000004 mol / 0.00002 mol = 0.2

Therefore, the mole fraction of CO₂ in the given solution is 0.2.

Learn more about mole fractions at https://brainly.com/question/14783710

#SPJ11

Liquid hydrogen is held together by dispersion forces, which are weak attractions between molecules caused by the uneven distribution of electrons.

The dispersion force is a type of force that exists between molecules. This force is very weak and temporary, but it can be sufficient to bind the atoms of some molecules together in a molecule. Dispersion forces are sometimes known as London forces, van der Waals forces, or instantaneous dipole-induced dipole forces.

The dispersion force is caused by the motion of electrons within the molecule. Electrons are always in motion, and sometimes the electrons in a molecule will happen to accumulate more on one side of the molecule than on the other. When this happens, a temporary electric dipole moment is created, which can attract or repel other molecules nearby. The dispersion force is an attractive force because the temporary electric dipole moment can attract other molecules.

Learn more about dispersion force at https://brainly.com/question/1432999

#SPJ11

The concentration of carbon dioxide (CO2) in the atmosphere has been affected by several factors over the past 150 years, including Human activities, deforestation, Natural climate, etc. which is a major driver of climate change.

Over the past 150 years, the concentration of carbon dioxide in the atmosphere has been controlled by several factors, including the burning of fossil fuels and deforestation. These two processes release large amounts of carbon dioxide into the atmosphere, which contributes to the increase in its concentration. Another factor that has contributed to the increase in carbon dioxide concentration is industrialization. As countries become more industrialized, they use more energy, which often comes from the burning of fossil fuels. This, in turn, increases the amount of carbon dioxide released into the atmosphere.

Other factors that have contributed to the increase in carbon dioxide concentration include land-use changes and natural processes such as volcanic eruptions and wildfires. Land-use changes such as deforestation can release carbon that has been stored in trees and soil, while volcanic eruptions and wildfires can release large amounts of carbon dioxide into the atmosphere as well.

The concentration of carbon dioxide (CO2) in the atmosphere has been affected by several factors over the past 150 years, including:

These factors have resulted in an overall increase in the atmospheric concentration of CO2, which is a major driver of climate change.

For more such questions on carbon dioxide , Visit:

https://brainly.com/question/21256960

#SPJ11

The entropy change per mole of gas is -1.387R.

The entropy change per mole of gas in a process in which an ideal gas is compressed to one-fourth of its original volume at a constant temperature can be calculated as follows:

Let us denote the original volume as V₁, the final volume as V₂, and the number of moles of the gas as n. The entropy change can be calculated using the formula:

ΔS = nR ln (V₂/V₁)

Therefore, the entropy change per mole of gas is given by:

ΔSper mole = R ln (V₂/V₁)

In this case, V₁ = 4V₂ and so,

ΔSper mole = R ln (1/4) = - R ln 4 = -2.303 R log 4 = -1.387R

Thus, the entropy change per mole of gas when an ideal gas is compressed to one-fourth of its original volume at a constant temperature is -1.387R.

To know more about entropy change, refer here:

https://brainly.com/question/4526346#

#SPJ11

The newly discovered amino acid can act as a buffer between pH values of pK1 and pH 14.

The newly discovered amino acid can act as a buffer within a specific range of pH values. This range is typically between pK1 (the acidity constant of the amino acid) and pH 14.

When the pH of the solution is lower than pK1, the amino acid will exist mainly in its uncharged form.

When the pH is higher than pK1, the amino acid will exist mainly in its charged form.

When the pH is between pK1 and pH 14, the solution will be in a state of equilibrium, with the uncharged and charged forms of the amino acid present in equal amounts. This is the buffer region and is where the amino acid will be able to act as a buffer.

In this region, the amino acid is able to absorb excess hydrogen ions (H⁺) or hydroxide ions (OH⁻) from the solution, thus maintaining a relatively constant pH.

Therefore, The newly discovered amino acid can act as a buffer within a specific range of pH values, between pK1 and pH 14.

To know more about buffers, refer here:

https://brainly.com/question/16556401#

#SPJ11

In the chemical equations, the reactants can be classified as follows:

1. O2 is an oxidizing agent as it gains electrons and gets reduced.
2. MnO2 is an oxidizing agent as it gains electrons and gets reduced.
3. ZnS is a reducing agent as it loses electrons and gets oxidized.
4. Cu2+ is an oxidizing agent as it gains electrons and gets reduced.
5. H2S is a reducing agent as it loses electrons and gets oxidized.
6. Cl- is a reducing agent as it loses electrons and gets oxidized.
7. H+ is an oxidizing agent as it gains electrons and gets reduced.

Now, let's calculate the increase or decrease in the oxidation state for each element as it changes from a reactant to a product:

1. Sulfur, beginning in the reactant ZnS, has an oxidation state of -2. In the product SO2, sulfur has an oxidation state of +4. The change in oxidation state is +4 - (-2) = +6.

2. Sulfur, beginning in the reactant H2S, has an oxidation state of -2. In the product CuS, sulfur has an oxidation state of -2. The change in oxidation state is -2 - (-2) = 0.

3. Chlorine, beginning in the reactant Cl-, has an oxidation state of -1. In the product Cl2, chlorine has an oxidation state of 0. The change in oxidation state is 0 - (-1) = +1.

4. Manganese, beginning in the reactant MnO2, has an oxidation state of +4. In the product Mn2+, manganese has an oxidation state of +2. The change in oxidation state is +2 - (+4) = -2.

So the oxidation state changes are:
Sulfur in ZnS = +6
Sulfur in H2S = 0
Chlorine in Cl- = +1
Manganese in MnO2 = -2

#SPJ11

Learn more about oxidizing agent: What is an oxidizing agent? https://brainly.com/question/14041413

From the atomic mass of Sb, 121.76 u, one can conclude that the element antimony has more of isotope Antimony-123.

Explanation:

Antimony is an element that has two stable isotopes:

antimony-121 and antimony-123 with masses of 120.90 u and 122.90 u, respectively. The atomic mass of Sb, 121.76 u, can be used to conclude that antimony has a greater percentage of antimony-123 than antimony-121.

Let's calculate the percentage of antimony-121 and antimony-123 in antimony as follows:

Suppose x is the percentage of antimony-121, and (100 - x) is the percentage of antimony-123 in antimony.

At this point, we can use the average atomic mass of antimony and mass of antimony-121 and antimony-123 to calculate x as follows:

x = ((121.76 u) - (122.90 u) (100 - x)) / (120.90 u - 122.90 u) = (121.76 u - 122.90 u + 122.90 x) / (-2.00 u) = (122.90 x - 1.14 u)  

/-2.00 u Solving for x gives x = 42.7%

Therefore, we can conclude that antimony has more of isotope Antimony-123.

To know more about antimony, refer here:

https://brainly.com/question/24201366#

#SPJ11

In summary, the mass percent of the sulfuric acid solution is 29.89%, the molality is 4.35 mol/kg, and the normality is 7.5 N.

To calculate the mass percent, molality, and normality of the 3.75 M sulfuric acid solution, follow these steps:
First let's calculate the mass of 1 liter of the solution:
We know, Density = mass/volume. So, mass = density × volume = 1.230 g/mL × 1000 mL = 1230 g
Now, calculating the mass of sulfuric acid (H2SO4) in 1 liter of the solution:
Molarity = moles of solute/volume of solution. So moles of solute = molarity × volume = 3.75 mol/L × 1 L = 3.75 mol
The molar mass of H2SO4 = (2 × 1.01) + (32.07) + (4 × 16) = 98.08 g/mol
Mass of H2SO4 = moles × molar mass = 3.75 mol × 98.08 g/mol = 367.8 g
To Calculate the mass percent of H2SO4:
Mass percent = (mass of solute / mass of solution) × 100
= (367.8 g / 1230 g) × 100 = 29.89%
To Calculate the molality of H2SO4:
Molality = moles of solute / mass of solvent (in kg)
Mass of solvent = mass of solution - mass of solute = 1230 g - 367.8 g = 862.2 g = 0.8622 kg
Molality = 3.75 mol / 0.8622 kg = 4.35 mol/kg
To Calculate the normality of H2SO4:
Normality = molarity × number of equivalents per mole
For H2SO4, there are 2 acidic hydrogens (protons) that can be released, so the number of equivalents per mole = 2.
Normality = 3.75 M × 2 = 7.5 N
In summary, the mass percent of the sulfuric acid solution is 29.89%, the molality is 4.35 mol/kg, and the normality is 7.5 N.

Learn more about mass percent, molarity and normality here, https://brainly.com/question/20349446

#SPJ11

Answer: The cell potential is the measure of how much potential energy the cell has, and it can be calculated by subtracting the standard potentials of each half-cell. The cell potential of this concentration cell is 0.54 V (to two significant figures). This potential difference is the amount of potential energy available in the cell and is measured in volts.

A concentration cell is a cell that is constructed by two half-cells with different concentrations of the same electrolyte. In this case, a concentration cell has been constructed using silver metal and solutions of 0.05 m and 1.5 m silver nitrate. The cell potential is the measure of how much potential energy the cell has, and it can be calculated by subtracting the standard potentials of each half-cell. The cell potential of this concentration cell is 0.54 V (to two significant figures).

The cell potential is determined by the difference in the standard potentials of the two half-cells. The standard potential of the silver half-cell is 0.799 V, and the standard potential of the silver nitrate half-cell (using 0.05 m and 1.5 m concentrations) is 0.259 V. To calculate the cell potential, subtract the standard potential of the silver nitrate from the silver: 0.799 V - 0.259 V = 0.54 V.

The cell potential of a concentration cell is determined by the difference between the standard potentials of the two half-cells, which can be calculated by subtracting the standard potential of the silver nitrate from the silver, resulting in 0.54 V (to two significant figures). This potential difference is the amount of potential energy available in the cell and is measured in volts.


Learn more about concentration cell here:

https://brainly.com/question/12674058#

#SPJ11

Explanation:

the reaction being referred to is the one where sulfur dioxide (SO2) and oxygen (O2) react to form sulfur trioxide (SO3) according to the following balanced equation:

2 SO2(g) + O2(g) ⇌ 2 SO3(g)

If the equilibrium is established by beginning with equal numbers of moles of SO2 and O2, i.e., if the initial molar amounts of SO2 and O2 are the same, then we can conclude the following at equilibrium:

The rate of the forward reaction (2 SO2(g) + O2(g) → 2 SO3(g)) is equal to the rate of the reverse reaction (2 SO3(g) → 2 SO2(g) + O2(g)).

The concentrations of SO2, O2, and SO3 will remain constant over time.

The amounts of SO2, O2, and SO3 present at equilibrium will depend on the temperature, pressure, and other conditions of the system.

The value of the equilibrium constant (Kc) for the reaction will have a specific numerical value at equilibrium, which will depend on the temperature and other conditions of the system.

The value of the reaction quotient (Qc) for the reaction will be equal to the equilibrium constant (Kc) at equilibrium, indicating that the system is at equilibrium

leave a comment

c) The rates of the forward and reverse reactions are equal. When the forward and reverse processes move ahead and backward at the same pace, with no discernible change in the system, this is referred to as dynamic equilibrium for reversible processes.

Dynamic equilibrium occurs when, given a reversible process, the rate of the forward reaction equals the rate of the reverse reaction. Although it appears that nothing is happening because the two rates are equal, the reaction is actually continuing at its steady rate. The equilibrium state is one in which there is no net change in the concentrations of reactants and products. The opposite is true; at equilibrium, both forward and reverse reactions proceed at the same rate, maintaining the net concentrations of reactants and products as is.

Learn more about equilibrium here:

https://brainly.com/question/14929208

#SPJ4

The given statement "The electron-domain geometry of a species is the arrangement of electron around the central atom, whereas the molecular geometry is the arrangement of bonded . two species with the same electron-domain geometry may have different molecular geometries" is true as the molecular geometry is  arrangement of the bonded atoms.

Electron-domain geometry is the arrangement of the electron pairs around the central atom in the molecule. It is  called as the molecular geometry or called the electron-pair geometry.

The Molecular geometry is also known as molecular structure, and is the three -dimensional structure or the arrangement of the atoms in the molecule. The statement is true.

To learn more about geometry here

https://brainly.com/question/18612295

#SPJ4

As a substance moves across line X from left to right on the Methanol phase diagram, it undergoes a change in state from solid to liquid.

The above change in state is due to an increase in temperature and pressure, which causes the intermolecular forces between the Methanol molecules to weaken, allowing them to move more freely and transition from a solid state to a liquid state. Therefore, the intermolecular forces between the molecules are decreasing as the substance moves across line X.

On the other hand, as a substance changes across line Z from the right to the left, it undergoes a change in state from gas to liquid. This change in state is due to a decrease in temperature and pressure, which causes the intermolecular forces between the Methanol molecules to strengthen, resulting in the gas molecules losing energy and transitioning to a liquid state. Therefore, the intermolecular forces between the molecules are increasing as the substance moves across line Z.

In summary, as a substance moves across line X from left to right, the intermolecular forces between the molecules are decreasing, while as a substance moves across line Z from right to left, the intermolecular forces between the molecules are increasing.

Read more about intermolecular forces here:

https://brainly.com/question/2193457

#SPJ1

See full question below



ANALYZING DATA

Analyze Phase Diagrams

A phase diagram shows, at any given temperature and pressure, the state of a certain substance, and the conditions where different states can be in equilibrium. The triple point, shown at where the three lines X, Y, and Z meet, is the temperature and pressure where solid, liquid, and gas can coexist. The critical point shows the minimum temperature and pressure where a substance can exist as both a liquid and gas. It is the point where it becomes a supercritical fluid. Supercritical fluids are used for industrial processes, including an alternative way to dye fabrics.

Methanol Phase Diagram

Pressure (atm)

80

Laqurd

Solid X

Y

1

Z

Gas

65

240

-97.65

-97.45

Temperature (°C)

sep interpret data explain what is happening to the intermolecular forces as a substance moves across line x from the left to the right. how does this compare to the molecular behavior as a substance changes across line z from the right to the left?

The pH of hydroxylamine will be 8.76.

The first step is to write the balanced equation for the reaction of hydroxylamine with water:

NH₂OH + H₂O ⇌ NH₃OH⁺ + OH⁻

The Kb expression for this reaction is:

Kb = [NH₃OH⁺][OH⁻] / [NH₂OH]

We are given the Kb value as 6.6 x 10⁻⁹, so we can use this to find the concentration of hydroxylamine that has been deprotonated:

Kb = [NH₃OH⁺][OH⁻] / [NH₂OH]

6.6 x 10⁻⁹ = x² / (0.050 - x)

Assuming that x is very small compared to 0.050, we can simplify the expression as follows:

6.6 x 10⁻⁹ = x² / 0.050

x² = 3.3 x 10⁻¹⁰

x = 5.7 x 10⁻⁶ M

Now that we have the concentration of hydroxide ions, we can use this to find the pH of the solution:

pOH = -log[OH-] = -log(5.7 x 10⁻⁶) = 5.24

pH = 14.00 - pOH = 8.76

Therefore, the pH of a 0.050 M solution of hydroxylamine is 8.76.

Learn more about pH on:

https://brainly.com/question/172153

#SPJ11

The quickest production of H₂ gas can be achieved by carrying out the reaction at a temperature near the boiling point of water which is 100° Celsius.

For the quickest production of H₂ gas, the reaction should be done at a higher temperature. This is because as temperature increases, the kinetic energy of the particles increases, leading to higher reaction rate. As the reaction rate increases, it leads to an increased rate of H₂ gas production. Therefore, the reaction should be done at a higher temperature to achieve quicker production of H₂ gas which is the boiling point of water.

The rate at which reactants change into products is known as the rate of reaction or reaction rate. It goes without saying that the rate at which chemical reactions take place varies greatly. While certain chemical reactions occur almost instantly, others typically take time to achieve their final equilibrium.

For instance, because it happens quickly, wood burning has a high reaction rate, whereas iron rusting has a low reaction rate because it happens gradually.

To know more about Boiling Point, visit:

https://brainly.com/question/2153588

#SPJ1

The pH of the solution is equal to the pKa₁ of the tri-protic acid.

The pH of a solution made with a tri-protic acid dissolved in water, when titrated with NaOH, can be determined using the following equation:

pH = pKa₁ + log10 [NaOH]/[acid]

Where pKa₁ is the first dissociation constant of the acid and [NaOH] and [acid] is the molar concentrations of the NaOH and acid solutions, respectively.

In this titration experiment, if you have added 0.1 moles of NaOH solution, then the molar concentration of the NaOH solution is 0.1 M and the molar concentration of the acid solution remains unchanged. Substituting these values into the equation, we can calculate the pH of the solution:

pH = pKa₁ + log10 [0.1/[acid]]  = pKa₁ + 0 =pKa₁

Therefore, the pH of the solution when 0.1 moles of NaOH has been added is equal to the pKa₁ of the tri-protic acid.

To know more about  pH, refer here:

https://brainly.com/question/491373#

#SPJ11

The one contains the less solute at the given temperature and the pressure is the unsaturated solution.

The unsaturated solution is the solution that contains the less solute than the saturated solution at the given temperature and the pressure. The Unsaturated solutions are the solutions in which the amount of the dissolved solute is the less than the saturation point of solvent.

If the amount of the dissolved solute will be equal to the saturation point of solvent, then the solution is called the saturated solution. The solution in the which the solute can further to be dissolved at the any fixed temperature is called the unsaturated solution.

To learn more about solution here

https://brainly.com/question/14591590

#SPJ4

According to the VSEPR model, the electron-pair arrangement of the central atom in BH₃ is predicted to be trigonal planar.

VSEPR stands for Valence Shell Electron Pair Repulsion. It is a model used in chemistry to predict the shape of individual molecules based on the extent of electron-pair electrostatic repulsion. It is founded on the Lewis structure theory of bonding, which describes electron pairs as lone pairs and bonds. Furthermore, VSEPR is based on the idea that electrons repel one another because they are negatively charged.

The electron-pair arrangement of the central atom in BH₃ is predicted to be trigonal planar by the VSEPR model.

BH₃ is a boron atom bonded to three hydrogen atoms. Boron has three valence electrons, but it requires six valence electrons to satisfy the octet rule. This means that boron has a vacant p orbital that it can use to form a molecule. The three hydrogen atoms are covalently bonded to the boron atom, with each hydrogen atom sharing one electron pair with the boron atom.

Based on this electron-pair arrangement, the VSEPR model predicts that the molecule will have a trigonal planar geometry. This means that the three hydrogen atoms will be positioned around the boron atom at the corners of an equilateral triangle. This arrangement causes the electron pairs in the valence shell to be as far apart as possible, resulting in a repulsion-free arrangement that is energetically stable.

Thus, the structure of  BH₃  will be a trigonal planar.

To know more about the VSEPR Theory, refer here:

https://brainly.com/question/14574141#

#SPJ11

The given statement  "a crystal is a single, continuous piece of a mineral bounded by flat surfaces that formed naturally as the mineral grew and it needs to be see-through" is True because a crystal is a mineral that is bounded by flat surfaces that is formed naturally as the mineral keeps growing.

Crystals are typically transparent or translucent and have a distinctive geometric shape. The size of a crystal can range from microscopic to a few centimeters.

The process of crystal growth can occur in one of two ways.

The first is through nucleation, which is when a particle, called a nucleus, begins to grow around the surface of the mineral. As it continues to grow, the nucleus will attract surrounding atoms and molecules, which then attach to the surface of the nucleus and form the crystal structure.

The second method is called epitaxy, and it occurs when a crystal already present in the environment will attract and attach surrounding atoms and molecules, thereby forming a new crystal structure.

Crystals can form in a wide range of shapes, sizes, and colors depending on the environment and the mineral from which they are formed. Additionally, different crystal shapes can often form from the same mineral depending on the environmental conditions.

In conclusion, it can be said that yes, a crystal is a single, continuous piece of a mineral that is bounded by flat surfaces that formed naturally as the mineral grew and it needs to be see-through.

To know more about Crystals, refer here:

https://brainly.com/question/13008800#

#SPJ11

Answer:

nerd

Explanation:

nerd

Answer: The pH of a 0.785 M solution of formic acid (HCHO2) is 3.85.

The pH of a 0.785 M solution of formic acid (HCHO2) can be calculated using the Ka value of 1.77 x 10-4. First, we calculate the concentration of the hydrogen ion, [H+], in the solution:

[H+] = Ka x [HCHO2] = 1.77 x 10-4 x 0.785 = 1.39 x 10-4 mol/L

The pH of the solution is equal to the negative logarithm of the hydrogen ion concentration:

pH = -log[H+] = -log(1.39 x 10-4) = 3.85

Therefore, the pH of a 0.785 M solution of formic acid (HCHO2) is 3.85.

Learn more about ph level here:

https://brainly.com/question/1458045#


#SPJ11