To solve this problem, the ideal gas law equation can be used. The volume of the balloon will come to 79.9 liters.
What is the ideal gas law?The ideal gas law is a fundamental equation in physics and chemistry that describes the behavior of ideal gases under various conditions. The law is expressed mathematically as:
PV = nRT
where P is the pressure of the gas, V is the volume it occupies, n is the number of moles of gas, T is the temperature of the gas in Kelvin, and R is the universal gas constant.
First, we need to convert the temperature from Celsius to Kelvin:
T = 20°C + 273.15 = 293.15 K
Next, we need to find the value of R, which is 0.0821 L·atm/mol·K for ideal gases.
We also know that the pressure is standard pressure, which is 1 atm.
Plugging in all the values, we get:
V = (nRT) / P
V = (3.2 mol * 0.0821 L·atm/mol·K * 293.15 K) / 1 atm
V = 79.9 L
Therefore, the volume of the balloon is 79.9 liters.
Learn more about the ideal gas law here:
https://brainly.com/question/28257995
#SPJ1
Ethanol is a chemical that can be synthetically produced from the sugars of plants, such as corn, using the fermentation reaction shown below. The reaction shows that sugar from plants can be broken down into ethanol and carbon dioxide, releasing heat. sugar → ethanol + carbon dioxide + heat In the United States, the sugar used to produce ethanol is commonly gained from corn—the same type of corn that is used for some foods, like corn flour, corn syrup, and corn oil. The ethanol can then be used as fuel in automobiles. Scientists and engineers are working to develop ways to replace corn with a different plant, such as switchgrass, in the production of ethanol. This is largely because using corn to produce ethanol could cause a problem for society. Which statement describes this problem? A. Grass resources are scarce and could be used up if harvested to produce ethanol. B. Corn grown for ethanol could take up field space that had been used to grow corn for food. C. Chemical processes that can transform corn's sugars into ethanol do not exist. D. Chemical processes that can release the chemical energy in ethanol do not exist.
Answer: Pretty tough one, but I would have to say B.
Explanation: If we plant Corn to use as fuel, the economy will need more Ethanol to fuel automobiles. This means that less edible corn will be planted, and more Ethanol Corn will be planted. Hope this helps!
Which is more abundant, Organic compounds or Inorganic compounds?
Answer:
inorganic compounds are more abundent
To determine the mass of 4.35 moles of potassium chloride
The mass of 4.35 moles of potassium chloride is 324.14 grams. Potassium chloride (KCl) is a chemical compound made up of potassium and chlorine.
Potassium chloride (KCl) is a chemical compound composed of potassium and chlorine. It is commonly used as a salt substitute for people on low-sodium diets, as well as a fertilizer, a source of potassium in food additives, and a component of some medical solutions. Potassium chloride can also be used in the production of various chemicals, including explosives and pharmaceuticals.
The molar mass of potassium chloride (KCl) is 74.55 g/mol (39.10 g/mol for K and 35.45 g/mol for Cl).
To calculate the mass of 4.35 moles of KCl, we can use the following formula:
mass = moles × molar mass
So, the mass of 4.35 moles of KCl is:
mass = 4.35 moles × 74.55 g/mol
mass = 324.14 g
To know more about potassium chloride please refer: https://brainly.com/question/22528097
#SPJ1
Need help on 9 and 10
a) The balanced chemical equation is: 2Al + 3ZnCl₂ → 2AlCl₃ + 3Zn. To determine the number of moles of ZnCl₂ required, we need to first calculate the number of moles of Al using its molar mass:
molar mass of Al = 26.98 g/mol
moles of Al = 17.8 g / 26.98 g/mol = 0.660 mol
According to the balanced equation, 2 moles of Al react with 3 moles of ZnCl₂. Therefore, we can use a proportion to find the number of moles of ZnCl₂:
0.660 mol Al / 2 mol Al = x mol ZnCl₂ / 3 mol ZnCl₂
x mol ZnCl₂ = (0.660 mol Al × 3 mol ZnCl₂) / 2 mol Al = 0.990 mol ZnCl₂
Therefore, 0.990 moles of ZnCl₂ are required.
b) From the balanced equation, we see that 2 moles of Al produce 2 moles of AlCl₃ and 3 moles of Zn. We can use the molar masses of the products to calculate the amount of each product produced:
molar mass of AlCl₃ = 133.34 g/mol
moles of AlCl₃ produced = 2 mol Al × (133.34 g/mol) / (26.98 g/mol) = 9.88 mol AlCl₃
molar mass of Zn = 65.38 g/mol
moles of Zn produced = 3 mol Zn × (65.38 g/mol) / (1 mol Zn) = 196.14 g Zn / 65.38 g/mol = 3.00 mol Zn
Therefore, 9.88 moles of AlCl₃ and 3.00 moles of Zn are produced.
c) The balanced chemical equation is: Fe₂O₃ + 3CO → 2Fe + 3CO₂
To determine the number of moles of CO needed to react with 4.00 kg of Fe₂O₃, we need to first convert the mass of Fe₂O₃ to moles using its molar mass:
molar mass of Fe₂O₃ = 159.69 g/mol
moles of Fe₂O₃ = 4.00 kg / (1000 g/kg) / 159.69 g/mol = 0.0250 mol
According to the balanced equation, 3 moles of CO react with 1 mole of Fe₂O₃. Therefore, we can use a proportion to find the number of moles of CO:
0.0250 mol Fe₂O₃ / 1 mol Fe₂O₃ = x mol CO / 3 mol CO
x mol CO = 0.0250 mol Fe₂O₃ × 3 mol CO / 1 mol Fe₂O₃ = 0.0750 mol CO
Therefore, 0.0750 moles of CO are needed.
To know more about molar masses, visit:
https://brainly.com/question/22997914
#SPJ1
2 FeCl3 + 3 Pb(NO3)3 -> 2 Fe(NO3)3 + 3 PbCl₂
How many mol of Fe(NO3)3 will be produced by using 1.5 mol of Pb(NO3)3?
i need a lab report! anyone have the chart with what they wrote and the answers to the lab report. Lab: Ionic and Covalent Bonds Write a lab report for this lesson’s lab. Be sure that your report: includes all major elements of a lab report. meets your teacher’s content and format expectations. is clearly organized and formatted. demonstrates strong scientific reasoning and writing.
Ionic and Covalent Bonds- The materials utilized during the experiment, the steps taken, and the techniques used to analyze the results should all be described in the section titled "Materials and Methods."
How do you write a chemistry lab report?A lab report is broken down into eight sections: title, abstract, introduction, techniques and materials, results, discussion, conclusion, and references. The title of the lab document must be descriptive of the scan and replicate what the scan analyzed.
What are ionic and covalent compounds in chemistry lab?Ionic bonds require an electron donor, the metal, and an electron accepter, the non-metal. Covalent bonding is the sharing of electrons between atoms. This kind of bonding happens between two of the equal element or elements shut to each other in the periodic table.
To learn more about Covalent Bonds here:
brainly.com/question/19382448
#SPJ9
How do mitosis and meiosis differ
Answer:Mitosis is the process in which a single cell divides to form two identical cells, while meiosis is a type of cell division that results in four daughter cells with half the number of chromosomes as the parent cell.
Explanation:
What is the working mechanism in the pH meter? Briefly describe it.
Can somebody please help me solve this? I would very much appreciate it.
a. Balanced equation for the decomposition of sodium bicarbonate by heating is:
2 NaHCO3(s) → Na2CO3(s) + CO2(g) + H2O(g)
b. To heat the mixture, the student can use a Bunsen burner or a hot plate in a fume hood to prevent the release of any harmful gases. The mixture should be heated until there is no more mass loss. To determine the mass loss, the student can weigh the vial and its contents before and after heating. The difference between the two weights will be the mass loss.
c. The student can know that all the sodium bicarbonate has been decomposed when there is no more mass loss. The heating should be continued until the mass of the vial and its contents remains constant.
d. The mass loss of 2.28 g is due to the decomposition of 1 mol of NaHCO3, which has a molar mass of 84 g/mol. Therefore, the original mixture contained 2.28/84 = 0.027 mol of NaHCO3. The mass of Na2CO3 in the mixture can be calculated as follows:
mass of Na2CO3 = mass of mixture - mass loss = 14.00 g - 2.28 g = 11.72 g
The molar mass of Na2CO3 is 106 g/mol, so the number of moles of Na2CO3 in the mixture is:
moles of Na2CO3 = mass of Na2CO3/molar mass of Na2CO3 = 11.72 g/106 g/mol = 0.111 mol
The percentage of Na2CO3 in the original mixture is:
% Na2CO3 = (moles of Na2CO3/total moles of carbonate) x 100% = (0.111/0.138) x 100% = 80.4%
e. To determine which is the limiting reactant, we need to compare the number of moles of NaHCO3 and Na2CO3 in the mixture. We know that the mixture contained 0.027 mol of NaHCO3 and 0.111 mol of Na2CO3. Since the balanced equation shows that 2 moles of NaHCO3 produce 1 mole of Na2CO3, the number of moles of Na2CO3 that can be produced from 0.027 mol of NaHCO3 is:
moles of Na2CO3 = 0.027 mol NaHCO3 x (1 mol Na2CO3/2 mol NaHCO3) = 0.0135 mol Na2CO3
Since the actual amount of Na2CO3 in the mixture is greater than 0.0135 mol, we can conclude that NaHCO3 is the limiting reactant, and Na2CO3 is in excess.
d.
Mass of NaHCO3 = 2.28 g / 84 g/mol = 0.027 mol NaHCO3
Mass of Na2CO3 = 14.00 g - 2.28 g = 11.72 g
Moles of Na2CO3 = 11.72 g / 106 g/mol = 0.111 mol Na2CO3
Total moles of carbonate = moles of NaHCO3 + moles of Na2CO3 = 0.027 mol + 0.111 mol = 0.138 mol
% Na2CO3 = (moles of Na2CO3 / total moles of carbonate) x 100% = (0.111 mol / 0.138 mol) x 100% = 80.4%
e.
Moles of Na2CO3 that can be produced from 0.027 mol of NaHCO3 = 0.027 mol NaHCO3 x (1 mol Na2CO3 / 2 mol NaHCO3) = 0.0135 mol Na2CO3
Since the actual amount of Na2CO3 in the mixture (0.111 mol) is greater than 0.0135 mol, NaHCO3 is the limiting reactant, and Na2CO3 is in excess.
ChatGPT
A 1.000-g sample of iron metal reacted with sulfite powder to give 1.574 g of product. Calculate the empirical formula of iron sulfide.
The empirical formula of iron sulfide is FeS. The empirical formula represents the simplest whole number ratio of atoms in the compound, but it may not represent the actual molecular formula.
What is Empirical Formula?
The empirical formula of a chemical compound is the simplest whole number ratio of atoms of each element present in the compound. It can be determined from the mass or percentage composition of the elements in the compound.
We can use the given mass of iron and the mass of the product formed to determine the amount of sulfur that reacted with the iron.
First, we need to determine the mass of sulfur in the product:
mass of sulfur = mass of product - mass of iron
mass of sulfur = 1.574 g - 1.000 g
mass of sulfur = 0.574 g
Next, we can use the mass of iron and sulfur to calculate the number of moles of each element:
moles of iron = mass of iron / molar mass of iron
moles of iron = 1.000 g / 55.85 g/mol
moles of iron = 0.0179 mol
moles of sulfur = mass of sulfur / molar mass of sulfur
moles of sulfur = 0.574 g / 32.06 g/mol
moles of sulfur = 0.0179 mol
The mole ratio of iron to sulfur in the compound can be determined by dividing each value by the smaller of the two:
mole ratio of iron to sulfur = moles of iron / moles of sulfur
mole ratio of iron to sulfur = 0.0179 mol / 0.0179 mol
mole ratio of iron to sulfur = 1:1
Learn more about Empirical Formula from the given link
https://brainly.com/question/1603500
#SPJ1
How much is evolved/absorbed (answer is ______ ) when 444 g of NBr3 is produced?
The amount of energy evolved/absorbed when 444 grams of NBr₃ is produced is 38.5 KJ
How do i determine the energy evolved/absorbed?First, we shall determine the number of mole in 444 grams of NBr₃. Details below:
Mass of CaCl₂ = 444 grams Molar mass of NBr₃ = 253.719 g/mol Mole of NBr₃ =?Mole = mass / molar mass
Mole of NBr₃ = 444 / 253.719
Mole of NBr₃ = 1.75 mole
Finally, we shall determine the energy evolved/absorbed. Details below:
N₂ + 3Br₂ -> 2NBr₃ + 44 KJ
From the balanced equation above,
When 2 moles of NBr₃ were produced, 44 KJ of heat energy were absorbed.
Therefore,
When 1.75 moles of NBr₃ is produced, = (1.75 × 44) / 2 = 38.5 KJ of heat is absorbed.
Thus, the heat energy absorbed is 38.5 KJ
Learn more about heat energy absorbed:
https://brainly.com/question/29224546
#SPJ1
A student mixes four reagents together, thinking that the solu- tions will neutralize each other. The solutions mixed together are 50.0 mL of 0.100 M hydrochloric acid, 100.0 mL of 0.200 M of nitric acid, 500.0 mL of 0.0100 M calcium hydroxide , and 200.0 mL of 0.100 M rubidium hydroxide . Is the resulting solution neutral ? If not , calculate the concentration of excess H^+ or OH ions left in solution.
To determine whether the resulting solution is neutral, we need to calculate the moles of H+ and OH- ions present in the solution and compare their concentrations.
First, we can calculate the moles of H+ ions present in the solution by using the equation:
moles H+ = volume (L) x concentration (mol/L)
moles H+ = (50.0 mL + 100.0 mL) x 0.100 mol/L = 15.0 x 10⁻³ mol
Next, we can calculate the moles of OH- ions present in the solution by using the equation:
moles OH- = volume (L) x concentration (mol/L)
moles OH- = (500.0 mL + 200.0 mL) x 0.0100 mol/L = 7.0 x 10⁻³ mol
Since the number of moles of H+ and OH- ions are not equal, the resulting solution is not neutral. To calculate the concentration of excess H+ or OH- ions left in solution, we need to determine which ion is present in excess.
Since HCl and HNO3 are strong acids and Ca(OH)2 and RbOH are strong bases, we can assume that all of the H+ and OH- ions from the acids and bases will react completely to form water. Therefore, we can calculate the excess H+ or OH- ions by comparing the moles of H+ and OH- ions present in the solution.
moles H+ - moles OH- = (15.0 x 10⁻³mol) - (7.0 x 10⁻³ mol) = 8.0 x 10⁻³ mol
Since the moles of H+ ions are greater than the moles of OH- ions, there is an excess of H+ ions in the solution. To calculate the concentration of excess H+ ions, we can divide the moles of H+ ions by the total volume of the solution in liters:
[H+] = moles H+ / volume (L)
[H+] = 8.0 x 10⁻³ mol / (50.0 mL + 100.0 mL + 500.0 mL + 200.0 mL) = 3.2 x 10⁻⁴M
Therefore, the resulting solution is not neutral, and it has an excess of H+ ions with a concentration of 3.2 x 10⁻⁴ M.
To know more about concentration, visit:
https://brainly.com/question/10725862
#SPJ1
How many grams of dry NH4Cl need to be added to 2.50 L of a 0.300 M solution of ammonia, NH3 , to prepare a buffer solution that has a pH of 8.51? Kb for ammonia is 1.8×10−5 .
The correct answer To prepare a buffer solution with a pH of 8.51, we need to use the Henderson-Hasselbalch equation:
pH = pKa + log([base]/[acid] where pKa is the dissociation constant for the base, [base] is the concentration of the base, and [acid] is the concentration of the conjugate acid. For the ammonia/ammonium ion buffer system, the equation is: NH3 + H2O ⇌ NH4+ + OH- The equilibrium constant expression for this reaction is: Kb = [NH4+][OH-]/[NH3] We are given the Kb value as 1.8 x 10^-5, and we can use it to find the concentration of OH- in the buffer solution: Kb = [NH4+][OH-]/[NH3] 1.8 x 10^-5 = [NH4+][OH-]/(0.300 - [NH4+]) Let's assume that the concentration of NH4+ is much less than 0.300 M (which is a reasonable assumption for most buffer solutions). This means that we can approximate the denominator as 0.300 M: 1.8 x 10^-5 = [NH4+][OH-]/0.300 Solving for [OH-], we get: [OH-] = sqrt(Kb*[NH3]) = sqrt(1.8 x 10^-5 * 0.300) = 6.60 x 10^-4 M To find the concentration of NH4+, we can use the Henderson-Hasselbalch equation: pH = pKa + log([base]/[acid]) 8.51 = 9.25 + log([NH4+]/[NH3]) Solving for [NH4+]/[NH3], we get: [NH4+]/[NH3] = 10^(8.51-9.25) = 3.52 x 10^-2 Since we know that the total volume of the buffer solution is 2.50 L, we can use the molarity of NH3 to find the moles of NH3 in the solution: moles of NH3 = 0.300 M x 2.50 L = 0.75 mol We can then use the ratio of NH4+ to NH3 to find the moles of NH4+ in the solution: moles of NH4+ = (3.52 x 10^-2) x (0.75 mol) = 2.64 x 10^-2 mol Finally, we can use the molar mass of NH4Cl (53.49 g/mol) to find the mass of NH4Cl needed to prepare the buffer solution: mass of NH4Cl = moles of NH4Cl x molar mass of NH4Cl To find the moles of NH4Cl, we can use the stoichiometry of the reaction between NH4Cl and NH3: NH4Cl + NH3 → NH4+ + Cl- For every mole of NH4+ in the buffer solution, we need one mole NH4Cl. Therefore moles of NH4Cl = moles of NH4+ = 2.64 x 10^-2 molSubstituting this value into the equation for mass of NH4Cl, we getmass of NH4Cl = (2.64 x 10^-2 mol) x (53.49 g/mol) = 1.41 g Therefore, we need approximately 1.41 grams of dry NH4Cl to add to 2.50 L of a 0.300 M
To learn more about Henderson- click on the link below:
brainly.com/question/29619380
#SPJ1
when you prepare a kettle of stew over a camp fire the stew is warmed in a variety of ways example the combination
A bonfire to heat a stew kettle. The stew is warmed using a variety of techniques, such as the combo, when I am close to a fire, you are not mainly receiving heat from hot air.
In what way does the heat get transferred by sitting next to the fire?The method by which heat is transmitted to a person sitting near a fire is convection. Convection happens as a method of transfer when heat is transferred from one thing to another body when both bodies are made of different materials.
As we feel the heat of a campfire, convection currents are heating your palm. Different heat sources, like radiation, cause heat to manifest. However, a powerful convection current rises in your direction as you elevate your palm over a fire.
When I sit beside a campfire, how does its hot air heat me?Learn more about convection
https://brainly.com/question/4138428
#SPJ9
A gas sample contains 4.4 g of CO2 and 2 g of He. What is the volume of the sample at STP?
Explanation:
At STP (standard temperature and pressure), the temperature is 273.15 K and the pressure is 1 atm. We can use the ideal gas law to calculate the volume of the gas sample:
PV = nRT
where P is the pressure, V is the volume, n is the number of moles of gas, R is the ideal gas constant (0.08206 L·atm/mol·K), and T is the temperature.
First, we need to calculate the number of moles of each gas present in the sample. The molar mass of CO2 is 44.01 g/mol, and the molar mass of He is 4.00 g/mol.
moles of CO2 = mass of CO2 / molar mass of CO2
moles of CO2 = 4.4 g / 44.01 g/mol
moles of CO2 = 0.0998 mol
moles of He = mass of He / molar mass of He
moles of He = 2 g / 4.00 g/mol
moles of He = 0.5 mol
The total number of moles in the gas sample is:
total moles = moles of CO2 + moles of He
total moles = 0.0998 mol + 0.5 mol
total moles = 0.5998 mol
Now, we can use the ideal gas law to calculate the volume of the gas sample:
V = nRT/P
V = (0.5998 mol)(0.08206 L·atm/mol·K)(273.15 K)/(1 atm)
V = 12.96 L
Therefore, the volume of the gas sample at STP is approximately 12.96 L.
What is the balanced equation of KOH + HCl -> KCl + H2O
I am not sure if this will help you but I tried.
Explanation,
This is already a balanced equation because there are same number of atoms for the same type of elements on both sides of the equation.
What are the common reducing agent
Answer: might be lack of taste, education, and good manners
Explanation:
The particle diagram below represents a solid sample of silver.
Ag
Ag
(Ag
Ag
N
Ag
2.
Ag
4.
(Ag
Ag
Ag
Ag
Ag
(Ag
1. metallic bonding
hydrogen bonding
3. covalent bonding
ionic bonding
Which type of bonding is present when valence electrons move within the sample?
The particle diagram represents a solid sample of silver, which is a metallic element. The type of bonding present when valence electrons move within the sample of silver is 1.) metallic bonding
What is metallic bonding?Metallic bonding is the type of bonding present in metals like silver, where valence electrons move freely throughout the solid sample. Therefore, the type of bonding present when valence electrons move within the sample of silver is metallic bonding.
Metallic bonding is a type of chemical bonding that occurs in metals and alloys. It is a type of bonding where valence electrons are not strongly bound to any one particular atom, but are free to move throughout the entire solid structure.
To know more about metallic bonding, refer
https://brainly.com/question/19023138
#SPJ1
why is grass green why not pink or blue?
Answer:
There is a tint or pigment in the grass that gives it the color green called chlorophyll. That is used during the photosynthesis cycle.
Explanation:
You're welcome.
Predicting Products: Ga2S3 + CaBr2. (2 and 3 are coefficients)
(if you could just write it out it’d be helpful)
The product of Ga₂S₃ + CaBr₂ is CaS and GaBr₃ , where 2 and 3 are stoichiometric coefficients. The balanced chemical reaction is 2Ga₂S₃ + 6CaBr → 6CaS + 2GaBr₃. The sum of the coefficients is 5.
What is balanced chemical reaction?An equation for a chemical reaction is said to be balanced if both the reactants and the products have the same number of atoms and total charge for each component of the reaction. In other words, both sides of the reaction have an equal balance of mass and charge.
The reactants and products of a chemical reaction are listed in an imbalanced chemical equation, but the amounts necessary to meet the conservation of mass are not specified. For instance, the mass balance of the following equation for the reaction between iron oxide and carbon to produce iron and carbon dioxide is off:
Fe₂O₃ + C → Fe + CO₂
The equation must be balanced so that each type of atom appears in equal amounts on both the left and right sides of the arrow. This is accomplished by altering the compounds' coefficients (numbers placed in front of compound formulas). In this example, the subscripts (tiny numbers to the right of some atoms, including iron and oxygen) are never altered. The chemical identification of the compound would change if the subscripts were changed.
2 Fe₂O₃ + 3 C → 4 Fe + 3 CO₂
To know more about conservation of mass, visit:
https://brainly.com/question/23218279
#SPJ1
How can a good or service affect culture?
Answer:
Explanation:
establish a direct relationship between organizational culture and effectiveness
how many moles of carbon atoms are there in 0.388 mole of c2h6?
The chemical formula for C2H6 tells us that there are two carbon atoms in each molecule of ethane. Therefore, to find the number of moles of carbon atoms in 0.388 moles of C2H6, we can use the following steps:
1. Determine the total number of moles of carbon atoms in 0.388 moles of C2H6 by multiplying the number of moles of C2H6 by the number of carbon atoms per molecule:
0.388 moles C2H6 x 2 moles C / 1 mole C2H6 = 0.776 moles C
2. Round the result to the appropriate number of significant figures, if necessary.
Therefore, there are 0.776 moles of carbon atoms in 0.388 moles of C2H
O₂(g) + 2 H₂(g) →2 H₂O
The rate law for this reaction is second order in H₂ and first order in O₂. Write the rate
law.
If the rate constant for this reaction at 1000 K is 6.0 x 104 M²s¹, what is the reaction
rate when [0₂] = 0.055 M and [H₂] = 0.015 M?
Answer:
9.94 x 10^-6 M/s
Explanation:
The rate law for the given reaction is:
Rate = k[O₂][H₂]²
where k is the rate constant, [O₂] is the concentration of O₂, and [H₂] is the concentration of H₂.
Using the given values, we can substitute them into the rate law and solve for the reaction rate:
Rate = (6.0 x 10^4 M²s^-1) x (0.055 M) x (0.015 M)²
Rate = 9.94 x 10^-6 M/s
Therefore, the reaction rate when [O₂] = 0.055 M and [H₂] = 0.015 M is 9.94 x 10^-6 M/s.
help me plssss i beg i beg
To calculate the percent yield, we need to compare the actual yield obtained to the theoretical yield that could be obtained under ideal conditions.
First, we need to find the balanced chemical equation for the reaction:
2 Cu + S → Cu2S
From the equation, we see that 2 moles of copper are needed to produce 1 mole of copper(1) sulfide.
Given that 0.0970 moles of copper was used, the theoretical yield of copper(1) sulfide can be calculated as follows:
1 mol Cu2S = 2 × 63.55 g Cu + 32.07 g S = 159.17 g Cu2S
0.0970 mol Cu × (159.17 g Cu2S / 2 mol Cu) = 7.94 g Cu2S (theoretical yield)
The actual yield obtained is given as 2.64 g Cu2S. Therefore, the percent yield can be calculated as:
percent yield = (actual yield / theoretical yield) × 100%
percent yield = (2.64 g / 7.94 g) × 100%
percent yield = 33.2%
The percent yield for the reaction is 33.2%. This means that only 33.2% of the expected yield of copper(1) sulfide was obtained under the given conditions.
To know more about percent yield, visit:
https://brainly.com/question/17042787
#SPJ1
Is “Does eating less fat increase a mouse’s life span” a good scientific question?
How do ionic differ from covalent bonds?
_____________________________________________________
I hope you find this easy to understand....
If you find this really useful, please give me a brainliest.
Have Any questions? write in the comments below.
Base is added to 200. mL of a 2.0 M solution acid solution. If 400 mL of base is added to titrate the acid solution. What is the concentration of the base?
Answer:
To solve this problem, we need to use the concept of stoichiometry and the equation for neutralization reactions. The balanced equation for the neutralization of an acid and a base is: acid + base → salt + water In this case, we know that 200 mL of a 2.0 M acid solution is titrated with 400 mL of a base solution. Let's call the concentration of the base solution "x". To find the concentration of the base solution, we can use the following equation: moles of acid = moles of base The number of moles of acid can be calculated as follows: moles of acid = volume of acid × concentration of acid moles of acid = 0.2 L × 2.0 mol/L moles of acid = 0.4 mol Since the acid and base react in a 1
If 39.5 g AlCl3 is produced, how many grams of HCl was used in the reaction
64.8 g of HCl was used in the reaction to produce 39.5 g of AlCl3.
What is Reaction?
A reaction is a process in which one or more substances are chemically transformed into one or more new substances. It involves the breaking of chemical bonds in the reactants and the formation of new bonds in the products. Reactions can occur spontaneously, as in the case of a burning match or rusting iron, or they may require the addition of energy, as in the case of photosynthesis or the combustion of fossil fuels.
The balanced chemical equation for the reaction between Al and HCl is:
2Al(s) + 6HCl(aq) → 2AlCl3(aq) + 3H2(g)
From the equation, we see that 6 moles of HCl are required to produce 1 mole of AlCl3. We can use this ratio to calculate the moles of HCl required to produce 39.5 g of AlCl3.
First, we need to calculate the molar mass of AlCl3:
AlCl3: Al = 26.98 g/mol, Cl = 35.45 g/mol x 3 = 106.35 g/mol
Molar mass of AlCl3 = 26.98 + 106.35 = 133.33 g/mol
Now we can use the molar mass of AlCl3 to convert the mass of AlCl3 produced to moles:
39.5 g AlCl3 / 133.33 g/mol = 0.296 moles AlCl3
Finally, we can use the mole ratio from the balanced equation to calculate the moles of HCl:
6 moles HCl / 1 mole AlCl3 = x moles HCl / 0.296 moles AlCl3
x = 6 x 0.296 = 1.776 moles HCl
To convert this to grams, we can use the molar mass of HCl:
HCl: H = 1.01 g/mol, Cl = 35.45 g/mol
Molar mass of HCl = 1.01 + 35.45 = 36.46 g/mol
1.776 moles HCl x 36.46 g/mol = 64.8 g HCl
Learn more about Reaction from given link
https://brainly.com/question/25769000
#SPJ1
Draw the MO diagram for the superoxide ion, O2-. Which statement is true regarding the superoxide ion?
A. The superoxide ion is diamagnetic.
B. It is attracted to a magnetic field.
C. Its MO diagram has two unpaired electrons.
D. It has a bond order of 2.
A. The superoxide ion is diamagnetic.
This statement is false. According to Hund's rule, electrons prefer to occupy separate orbitals if possible, which means that the two unpaired electrons in the π* orbital will have parallel spins, making the superoxide ion paramagnetic.
B. It is attracted to a magnetic field.
This statement is true. As a paramagnetic species, the superoxide ion will be attracted to a magnetic field.
C. Its MO diagram has two unpaired electrons.
This statement is true. The π* orbital contains two electrons with parallel spins, which means they are unpaired.
D. It has a bond order of 2.
This statement is also true. The bond order can be calculated by taking the difference between the number of electrons in the bonding orbitals (σ and π) and the number of electrons in the antibonding orbitals (σ* and π*), and then dividing by two. In this case, the bonding orbitals have 6 electrons and the antibonding orbitals have 4 electrons, giving a bond order of 1. (6 - 4) / 2 = 1. However, because the superoxide ion is a radical species with unpaired electrons, we need to add one more electron to the MO diagram to get the correct bond order. The total number of valence electrons in the superoxide ion is 16 (6 from each oxygen atom, plus the extra electron), which gives a bond order of 2. (8 - 6) / 2 = 1.
Learn more about diamagnetic here:
https://brainly.com/question/15462756
#SPJ1
The graph shows the reaction AB → A+B+ heat.
If the graph indicates how quickly the reaction is progressing,
then the concentration of which component of the equation is
shown in the graph?
Oreactant
O product A
O product B
O heat
Help asap 20pts
The graph shows the reaction AB → A+B+ heat.
If the graph indicates how quickly the reaction is progressing,
then the concentration of which component of the equation is
shown in the graph?
Answer: reactant.
The graph shows the progress of a reaction over time, and the concentration of the reactant (AB) decreases while the concentration of the products (A and B) increases.
Therefore, the concentration of the reactant (AB) is shown in the graph. As the reaction progresses, the concentration of the reactant decreases and the concentration of the products increases until the reaction is complete, at which point the concentration of the reactant will be zero and the concentration of the products will be at a maximum.
The heat released or absorbed during the reaction is not shown in the graph, as it is not a component that changes concentration over time.
To know more about reactant, visit:
https://brainly.com/question/17096236
#SPJ1