What is the unit force used in gravity calculations and why is it called this

Answers

Answer 1

Answer:

newtons per kilogram (n/kg)

Explanation:

It is named after Isaac Newton in recognition of his work on classical mechanics, specifically Newton's second law of motion.


Related Questions

5 (d) Assume that the power available to raise packages is constant. A package of mass greater than 36 kg is raised through the same height. Suggest and explain the effect of this increase in mass on the operation of the conveyer belt.​

Answers

Answer:

Here is the answer for the question

Mass is increased and power is constant, so increase in potential energy of mass is also greater.

What is Potential energy?

The labor required to move an object into a position is equated with the potential energy. For instance, if you were to pick up a book and set it down on a table.

Elastic  When materials stretch or contract, elastic potential energy is stored. Spring, rubber band, and slingshot motions are a few examples of elastic potential energy.

Electric - The ability to perform labor depending on an object's electric charge is known as electric potential energy. Nuclear: The atom's internal particle potential energy. Chemical potential energy is the energy held in chemicals.

Therefore, Mass is increased and power is constant, so increase in potential energy of mass is also greater.

To learn more about Potential energy, refer to the link:

https://brainly.com/question/24284560?

#SPJ2

Question :- If a spring of spring constant ‘m’ is divided into 5:3 ratio, then what will be the spring constant of the larger piece of spring?

Answer :- 8m/5

I need explanation! ​

Answers

[tex]\qquad\qquad\huge\underline{{\sf Answer}}[/tex]

Here we go ~

As we have been given, The spring of spring constant " m " was cut to form 2 new springs in ratio of 5 : 3.

we have to find out the spring constant of the longer spring which was formed, and it's given that spring constant of the main spring was " m "

Now, let the length of main spring be " l "

So, lengths of the resultant springs will be :

[tex]\qquad \cal \dashrightarrow \: \dfrac{5l}{8} \: \: and \: \: \dfrac{3l}{8} \: \: \: \: respectively[/tex]

And we know that spring constant is inversely proportional to length of spring so, we infer that :

[tex]\qquad \cal \dashrightarrow \: m\propto \dfrac{1}{l} m \: \: \: \: \: - (1)[/tex]

where, m is spring constant of main spring and l is its length.

[tex]\qquad \cal\dashrightarrow \: m_1 \propto \dfrac{8}{5l} \: \: \: \: \: \: \: - (2)[/tex]

where, m1 is spring constant of longer spring, and 5l/8 is its length.

let's divide (2) by (1), we will get ~

[tex]\qquad \cal \dashrightarrow \: \dfrac{m_1}{m} = \dfrac{8}{5l} \div \dfrac{1}{l} [/tex]

[tex]\qquad \cal \dashrightarrow \: \dfrac{m_1}{m} = \dfrac{8}{5l} \times \dfrac{l}{1} [/tex]

[tex]\qquad \cal \dashrightarrow \: \dfrac{m_1}{m} = \dfrac{8}{5} [/tex]

[tex]\qquad \cal \dashrightarrow \: {m_1}{} = \dfrac{8}{5} m [/tex]

So, the spring constant of equivalent longer strong formed will be 8/5 m

prove:

[tex]m_2 = \frac{8m}{5} [/tex]

Explanation:

Given:

Spring constant of spring= m

The ratio of spring = 5:3

To find:

spring constant of the larger piece of spring?

Solution:

Let the length of larger piece L2 be 5x and smaller piece L1 be 3x with spring constant m2 and m1 respectively.

now,

spring constant (m) inversely proportional to the length of spring i.e.

[tex]m \propto \: \frac{1}{l} {,}\: m_1 \propto \: \frac{1}{l_1} {,}\: m_2 \propto \: \frac{1}{l_2}[/tex]

Also,

The spring is connected in series hence,

[tex] \frac{1}{m} = \frac{1}{m_1} + \frac{1}{m_2} [/tex]

and

[tex] \frac{m_1}{m_2} = \frac{l_2}{l_1} \\ {m_1} = {m_2} \cdot \frac{l_2}{l_1} \\ {m_1} = {m_2} \cdot \frac{5}{3} \\ [/tex]

Substituting above value in,

[tex] \frac{1}{m} = \frac{1}{m_1} + \frac{1}{m_2} \\ \frac{1}{m} = \frac{1}{{m_2} \cdot \frac{5}{3}} + \frac{1}{m_2} \\ \frac{1}{m} = \frac{3}{5m_2} + \frac{1}{m_2} \\ \frac{1}{m} = \frac{3m_2 + 5m_2}{5 {m_2}^{2} } \\ \frac{1}{m} = \frac{8m_2}{5 {m_2}^{2} } \\ \frac{1}{m} = \frac{8 \cancel {m_2}}{5 \cancel{m_2}^{2} } \\ \frac{1}{m} = \frac{8}{5m_2} \\ m_2 = \frac{8m}{5} [/tex]

Thanks for joining brainly community!

The shared attitudes, values, goals, and practices that characterize groups is defined as
A. family
B. parenting
C. genetics
D. culture
Please select the best answer from the choices provided
Ο Α.
OB
Ос
OD

Answers

They can be defined as culture (D).

when an atom is unstable it will ___ into a new atom

Answers

Answer:

When an atom is unstable it will change into a new atom

In a parallel circuit the ________ resistance is always less than the resistance of any individual resistor.

Answers

Answer:

"total" resistance

The current will have the option of going thru more than 1 resistor so the total resistance of the circuit will be less than any resistance in the circuit.

What is the difference between heat capacity and specific heat?.

Answers

Answer:

Heat capacity is the amount of heat required to raise the temperature of an object by 1oC. The specific heat of a substance is the amount of energy required to raise the temperature of 1 gram of the substance by 1oC.

Explanation:

The answer is above.

Write equations for both the electric and magnetic fields for an electromagnetic wave in the red part of the visible spectrum that has a wavelength of 725 nm and a peak electric field magnitude of 2. 9 V/m. (Use the following as necessary: t and x. Assume that E is in volts per meter, B is in teslas, t is in seconds, and x is in meters. Do not include units in your answer. Assume that E

Answers

The peak magnetic field of the electromagnetic wave in the red part of the visible spectrum is 9.67 x 10⁻¹⁰ T.

Relationship between electric and magnetic field

The relationship between electric and magnetic field at a given peak electric field is given as;

c = (E₀) / (B₀)

where;

c is speed of lightE₀ is the peak electric fieldB₀ is the peak magnetic field

B₀ = E₀ / c

B₀ = (2.9) / (3 x 10⁹)

B₀ = 9.67 x 10⁻¹⁰ T

Thus, the peak magnetic field of the electromagnetic wave in the red part of the visible spectrum is 9.67 x 10⁻¹⁰ T.

Learn more about peak magnetic field here: https://brainly.com/question/24487261

What direction would the north pole of a bar magnet point if you were to hang the bar magnet from a thin string?.

Answers

Answer:

TOWARD the North pole.

Explanation:

The strength of the electric field 0.5 m from a 6 µc charge is n/c. (use k = 8.99 × 109 n•meters squared per coulomb squared and round answer to the nearest whole number.)

Answers

53....................................

Explanation:

The spacecraft that really gave scientists their first good close-up look at the planet Mercury was:

Answers

Answer:

Mariner 10 in 1974 and 1975

Explanation:

A cosmic ray electron moves at 7.50 × 106 m/s perpendicular to the Earth’s
magnetic field at an altitude where field strength is 1.00 × 10−5 T. What is the radius
of the circular path the electron follows?

Answers

Answer:

4.27m

Explanation:

force on moving charge= qvBsin$

centripetal force=mv^2/r

since the forces are equal

mv^2/r=qvBsin$

r= (mv^2)/(qvBsin$) = mv/qBsin$

r-radius

m-mass of an electron

q-charge on electron

v-velocity of the electron

B-field strength

$ - angle

r= ((9.1093837 ×10^-31)kg × 7.50 × 10^6 m/s)/(1.6×10^-19C×10^-5T×sin90) = 4.27m

This property of matter describes
a substance's ability to be
stretched thin?

Answers

Answer:

Ductility

Explanation:

is the physical property of a material associated with the ability to be hammered thin or stretched into wire without breaking. A ductile substance can be drawn into a wire.

How many years does it take for pluto to orbit the sun.

Answers

Answer:

248 years

Explanation:

The last time this happened was from 1979 to 1999. It won't happen again until 2227.

how is sound produced ​

Answers

Sounds are created when something vibrates (shakes back and forth), sending waves of vibrations into the ears of the listener. When a bell is struck, the metal vibrates. The vibrations travel through the air as sound waves.

hope this helps

The signs of cognitive (mental) stress include all of the following except: a. loss of memory b. loss of concentration c. poor judgment d. isolation please select the best answer from the choices provided. a b c d

Answers

All of the above-mentioned symptoms of cognitive stress except for isolation. Option d is correct.

What is cognitive mental stress?

Mental (cognitive) stress is an emotional/physical strain that causes a person to feel irritated, depressed, angry, anxious, and so on.

Cognitive stress is marked by a variety of moods and/or emotions linked to excessive anxiety about money, overall health, job loss, and so on.

All of the above-mentioned symptoms are markers of cognitive stress. In some circumstances, this condition may exacerbate stress.

Loss of memory, loss of concentration, and poor judgment are symptoms that are markers of cognitive stress.

Social isolation has been linked to a variety of mental illnesses, including increased stress, despair, and anxiety.

Hence all of the above-mentioned symptoms of cognitive stress except isolation. Option d is correct.

To learn more about the mental stress refer to the link;

https://brainly.com/question/9086547

Answer:

D

Explanation:

Radiation transfers
thermal
energy by
waves. These waves transfer energy from a warmer object to a cooler object, with or without

Answers

Answer:

Radiation travels by Waves!!

Explanation:

BONUS:Thermal radiation is a longitudinal wave.

Hope this helped

Answer:

Radiation transfers   energy by  ⇒ electromagnetic  waves. These waves transfer energy from a warmer object to a cooler object, with or without  ⇒ matter .

Explanation:

edge2022

A glass slides across a bar and slows down due to a kinetic friction of 0. 175N. If the glass weighs 0. 500N, what is the coefficient of kinetic friction between the glass and the bar?

Answers

Answer:

F = M a = Ff     force of friction

Ff = μ M g = μ W         where M g = weight of glass

The problem gives the kinetic friction as a force (Ff) in Newtons

μ = Ff / W = .175 / .500 = .35

Once the merry-go-round travels at this new angular speed, with what force does the person need to hold on?.

Answers

For a merry go round with a radius of R=1.8 m and moment of inertia I=184 kg-m^2 is spinning with an initial angular speed of w=1.48 rad/s   is mathematically given as

F= 618.9 N

What is the centripetal force?

Generally, the equation for the angular speed  is mathematically given as

w = v/R

Therefore

w= 4.7/1.8

w= 2.611 rad/s

Where total momentum

Tm= 642.96 + 272.32

Tm= 915.28

and total inertia

Ti= 184 + 246.24

Ti= 430.24

In conclusion, centripetal force

F= mrw^2

F = m*R*w2^2

F = 76*1.8*2.127^2

F= 618.9 N

Read more about mass

https://brainly.com/question/15959704

CQ

Flag

a merry go round with a radius of R=1.8 m and moment of inertia I=184 kg-m^2 is spinning with an initial angular speed of w=1.48 rad/s in the counter clockwise direction when viewed from above a person with mass m=76 kg and velocity v=4.7 m/s runs on a path tangent to the merry go round once at the merry go round the person jumps on and holds on to the rim of the merry go round angular speed of the merry go round after the person jumps on 2.127 rad/s Once the merry go round travels at this new angular speed with what force does the person need to hold on?

Explanations based on supernatural forces, values or ethics can never be disproved and thus do not fall under the realm of science.

options:
True
False

Answers

Answer:

true, since science does not believe and agree to the supernatural.

how would you ground an electrical applicance

Answers

With a ground electrode, also called earth pin.Grounding via water pipes.Grounding via the electrical power grid of the energy provider.A combined or collective earthing system surrounding multiple buildings.hope it helps...!!!

True or False
1. Conduction occurs only when molecules are in contact with each other.
2. Fast moving particles will take heat from slow moving particles.
3. Energy is carried in waves during conduction.
4. Conduction can transfer heat through space.
5. Warmer particles will give heat to cool particles.
6. During conduction, the movement of the molecules is important.
7. Light is a form of conduction heat transfer.
8. A carrier is needed for conduction to occur - something must carry the heat.
9. Fast moving particles will speed up slow moving particles.

Answers

#1

True

#2

No it happens opposite as heat transfers from high to low

False

#3

True

#4

No it can't be happened in vaccum

False

#5

True(Stated in no 2)

#6

True

Faster the movement faster the heat transfer

#7

Light particles get transferred from low to high (sun light)

True

#8

True

#9

False

why metallic chain is used in the tanker transporting highly inflammable liquid ​

Answers

Answer:

For the displacement of charge

Explanation:

When the vehicle is in motion,due to friction in air,the body of the vehicle gets charged. if accumulated, charge becomes excessive,sparking May occur and inflammable materials may catch fire. therefore metallic chains touching the ground are introduced so that the charge quickly leaks to the earth.

What is a mutation? *

A) a type of molecule that genes and chromosomes are made of

B) a random change to a gene that sometimes results in a new trait

C)the process in which two parents pass on their genes to create offspring

D)a characteristic that all members of a species have

Answers

Your answer is B. my friend!

if a plane is flying in the air and it crashes on the border of america and canada where do u bury the survivors

Answers

Answer:

Why would you bury the survivors? LOL

Answer:

you dont bury the surviors because they are alive.

Explanation:

Please mark me branliest

A wave along a guitar string has a frequency of 440 hz and the wavelength of 1. 25m. What is the speed of the wave?

Answers

Answer:

550 m/s

Explanation:

Speed of wave = wl * f      wl = 1,25 m    f = 440 Hz  (given)

                          1.25 m * 440 = 550 m/s

. The net force F acting on an object that moves along a straight line is given as a function of time t by 2 F t( ) = κt + τ , where 2 κ = 1 N s and τ = 1 N . What is the change in momentum of the object from t = 0 s to t = 3 s?

Answers

The change in the momentum of the object moving along a straight line is determined as 3 Ns.

Change in momentum of the object

The change in the momentum of the object is equal to impulse received by the object.

The impulse received by the object is determined from the product of force and time of action.

J = Ft

Ft() = kt + τ

at time 0 s

Ft(0) = 1(0) + 1

Ft(0) = 1 Ns

at time , t = 3 s

Ft(3) = 1(3) + 1

Ft(3) = 4 Ns

Change in momentum from 0 s to 3 s, =  4 Ns - 1 s = 3 Ns

Thus, the change in the momentum of the object moving along a straight line is determined as 3 Ns.

Learn more about impulse here: https://brainly.com/question/25700778

What is the position of the earth, moon, and sun during a new moon?


Earth is between the sun and the moon


sun is between Earth and the moon


moon is to the side of Earth and the sun


moon is between the sun and Earth

Answers

Answer: The first option

Explanation: common sense

The Moon always rotates about the Earth in its orbit. The position of the Earth, moon and sun during a new moon is Earth is in between Sun and Moon.

What is new moon?

When moon has travelled for 14 days, it starts its journey again for the next 14 days. The journey starts from the new moon to the full moon. The position of new and full moon is the same. At this time, the Earth is in between the Sun and the Moon.

Thus, the position of the Earth, moon and sun during a new moon is Earth is in between Sun and Moon.

Learn more about New Moon.

https://brainly.com/question/13538936

#SPJ2.

Lesson 18, Physical Science
Please help!! I'll mark you as Brainlest

Q1. Describe how the skater's kinetic and potential energy change as the skater descends. Explain what happens to the total energy (potential energy + kinetic energy) in terms of the Law of Conservation of Energy.
Change the skater with the "Choose Skater" button.






Q2. Describe any changes to the bar graphs you see when you change skaters. Is the Law of Conservation of Energy still obeyed?

Reset the half-pipe and click on the "Show Grid" check box. Grab the track (drag the track with a right-click) and set the bottom of the track at "zero" height.
Select the default, 75 kg, PhET skater and set him at 5.0 meters above the zero and allow him to skate.
Q3. How much potential energy does the skater have at 5.0 meters? How much kinetic energy does the skater have at 0.0 meters?

Q4. If a 20.0 kg skater started his skate at 10 meters height (on Earth):
How much potential energy would the skater have at the start of skating?
How much kinetic energy would the skater have at the start of skating?
How much potential energy would the skater have at zero height?
How much kinetic energy would the skater have at zero height?


Create this skate path:


Start the skater on the left side and observe. Then answer the following question:
Q5. Does the skater have enough energy to make it all the way to the right side? Explain why or why not.

If the skater starts on the left on the following path:


Q6. Answer the parts of this question based upon the above skater path. If the skater starts at point "A":

Where does the skater have the maximum potential energy?
Where does the skater have the minimum potential energy?
Where does the skater have the minimum kinetic energy?
Where does the skater have the maximum kinetic energy?
At which two points would the skater have about the same kinetic energy?

Q7. Based upon the equation for potential energy, how do you expect the potential energy to change when the gravity is lower than it is on Earth (for example, gravity on the moon is 1.6 m/s2 )?

Use the option boxes to move the skater to Jupiter, where acceleration due to gravity is 26 m/s2.

Q8. Describe any differences you see in potential and kinetic energy between the Earth and Jupiter.
Use the option boxes to move the skater to the moon where the acceleration from gravity is 1.6 m/s2.

Q9. Describe any differences you see in potential and kinetic energy between the Earth and the moon.

Q10. Does this agree with the prediction you made in Q7?

Q11. How high must a 20 kg skater start at to have a kinetic energy of 360 joules at a height of 0 meters?

Q12. What is the total energy of the 60.0 kg skater before she starts her ride, 12 meters above the ground?

Q13. If you throw a 2.0 kg basketball straight up in the air, at what height will the basketball have 160 J of potential energy?

Q14. Describe what happens to the bar graphs when you change the amount of friction. Is the Law of Conservation of Energy still obeyed?

Answers

The kinetic energy of the skater would increase while his potential energy would decrease as he descends from top to bottom.

What is the law of conservation of energy?

The law of conservation of energy states that the energy possessed by a physical body can neither be created nor destroyed, but it can only be converted (transformed) from one form of energy to another.

Based on the law of conservation of energy, the total energy (potential energy + kinetic energy) would always remain constant because it is conserved.

The potential energy of this skater at a height of 5.0 meters is given by:

PE = mgh

PE = 75 × 9.8 × 5.0

PE = 3,675 Joules.

Also, the kinetic energy of this skater at a height of 0.0 meters would be equal to zero assuming it is at rest.

In conclusion, the potential energy possessed by a physical body is highly dependent on its height while kinetic energy depends only on motion, regardless of height.

Read more on energy here: https://brainly.com/question/1242059

#SPJ1

A boy throws a ball vertically up. It returns the ground after seconds. Find the  maximum height reached by the ball.​

Answers

Answer:

If he throws the ball with speed V then     (vertical speed)

V / g     is the time to reach maximum height    (V2 - V1) / a

The total time to again reach the ground is then

T = 2 V / g

H = 1/2 g t^2     where t = V / g

H = 1/2 g (V / g)^2 = V^2 / (2 g)

This is the familiar formula

V = (2 g H)^1/2      for the initial upwards speed

Light enters air from water. The angle of refraction will be.

Answers

Answer:

90 degrees...

Explanation:

Hope this helps you!!!

Other Questions
What is 14 inches rounded to the nearest inch? 9=3/2x step by step ASAP why do people invest money in stocks and new businesses? Hello help math math math Can i get some help some one wanted me to draw them something what should i draw? If ur a girl whats something u like about a boy if ur a boy whats something u like about a girl? MOST TRUTHFUL AND GOOD ANSWER GETS BRAINLIEST Business loans available from commercial banks with terms generally five to twelve years and secured or unsecured are called _____ loans. Me duele el brazo.achesmovesvomitsto get sick Why are cotyledons green in beans but not in corn?. Which of the following statements best describes the relationship between genes and their outcomes?Every gene influences a single trait.The outcome of a gene is affected by the environment of the cells and the timing of gene expression.Similar genes produce the same outcome in every individual. Every gene can be linked to one specific, predictable outcome. ______ demands courage and fortitude on the part of followers. Combativeness Whistleblowing Steadfastness Game-changing value of YZC in the follow The ____________ is a phenomenon that occurs when electrons are ejected from a piece of metal after light has been shined onto the metal surface. Guys i need help rnNeeds a nice ans, thanks 3x + 3y = 185x + 3y = 28 What is the value of the expression 13x34 when x=14? GEOMETRY QUESTIONS PLEASE HELPWhat is the measure of /A?Quadrilateral ABCD is inscribed in a circle.What is the measure of angle A? A group of 12 friends bought a boat costing $5,424. Each of the friends paid an equal share of the cost. How much did each person pay? hey can someone help me out please I need to turn this in to my teacher in 12mins TriangleABC with vertices A(3, -1), B(0, 8), and C (-3, 1) is reflected so that A isnow (3, 1). What was the reflection,and where are B and C?