The pH of the solution obtained by mixing 35.00 mL of 0.250 M HCl and 35.00 mL of 0.125 M NaOH can be calculated as follows:
Let's understand this step-by-step:
1. HCl is an acid, while NaOH is a base. When an acid and a base react, they undergo a neutralization reaction, forming salt and water. The balanced chemical equation for the reaction between HCl and NaOH is:
HCl + NaOH → NaCl + H2O
This equation shows that 1 mole of HCl reacts with 1 mole of NaOH to produce 1 mole of NaCl and 1 mole of water.
Using the volumes and concentrations given in the question, we can calculate the moles of HCl and NaOH as follows: moles of HCl = 35.00 mL × 0.250 mol/L = 0.00875 mol
moles of NaOH = 35.00 mL × 0.125 mol/L = 0.004375 mol
The reaction between HCl and NaOH is 1:1, so the limiting reactant is NaOH because it has fewer moles. Therefore, all the NaOH will be used up, leaving some HCl unreacted. The number of moles of HCl that remain after the reaction is equal to the initial number of moles of HCl minus the number of moles of NaOH used up:
mol of HCl remaining = 0.00875 mol - 0.004375 mol = 0.004375 mol
The total volume of the solution is the sum of the volumes of the acid and the base:
Vtotal = Vacid + Vbase
Vtotal = 35.00 mL + 35.00 mL = 70.00 mL = 0.07000 L
The concentration of HCl in the solution is calculated using the number of moles of HCl remaining and the total volume of the solution:
[HCl] = mol of HCl remaining / Vtotal
[HCl] = 0.004375 mol / 0.07000 L
[HCl] = 0.0625 M
The pH of the solution can be calculated using the equation:
pH = -log[H+]
The concentration of H+ in the solution is equal to the concentration of HCl, so:
[H+] = [HCl] = 0.0625 M
Substituting this value into the pH equation:
pH = -log[H+]pH = -log(0.0625)pH = 1.20Therefore, the pH of the solution obtained by mixing 35.00 mL of 0.250 M HCl and 35.00 mL of 0.125 M NaOH is 1.20.
Learn more about pH: What is the approximate ph of a solution if the concentration of hydrogen ions is 5. 0 × 10–4 moles per liter? https://brainly.com/question/26424076
#SPJ11
hello i need someones help if you know the right answer 10 point
The number of moles of Na3PO4 that will be formed would be 2 moles.
Stoichiometric problemThe balanced chemical equation for the reaction between NaOH and H3PO4 is:
3 NaOH + H3PO4 → Na3PO4 + 3 H2O
According to the equation, 3 moles of NaOH react with 1 mole of H3PO4 to produce 1 mole of Na3PO4. Therefore, we can use this ratio to find out how many moles of Na3PO4 will be formed when 6 moles of NaOH react with 9 moles of H3PO4:
Moles of Na3PO4 = (6 mol NaOH) x (1 mol Na3PO4 / 3 mol NaOH)
= 2 mol Na3PO4
So, 2 moles of Na3PO4 will be formed when 6 moles of NaOH react with 9 moles of H3PO4.
More on stoichiometric problems can be found here: https://brainly.com/question/29856106
#SPJ1
the lattice energy of a crystal is less than the energy necessary to pull the crystal apart. true false
The given statement "the lattice energy of a crystal is less than the energy necessary to pull the crystal apart" is false.
The lattice energy of a crystal is greater than the energy necessary to pull the crystal apart because the lattice energy represents the amount of energy released when oppositely charged ions come together to form a crystal lattice structure. In other words, it is the energy released when the cations and anions of an ionic compound come together to form a solid crystal. This energy is strong because of the strong electrostatic attraction between the cations and anions.
On the other hand, the energy required to pull the crystal apart is called the dissociation energy or bond energy, and it represents the energy required to break the bonds between the cations and anions in the crystal lattice. This energy is weaker than the lattice energy because it only involves breaking one bond at a time, while the lattice energy involves breaking all the bonds in the crystal simultaneously. Therefore, the lattice energy is greater than the dissociation energy.
To learn more about lattice energy refer - https://brainly.com/question/30174489
#SPJ11
why must a grignard reaction be kept dry (free of water)? in addition, why must the glassware be dried in an oven prior to the experiment?
The Grignard reaction must be kept dry because water will react with the Grignard reagent and terminate the reaction.
Glassware must be dried in an oven prior to the experiment because even small amounts of water can react with the Grignard reagent and terminate the reaction.
In order to ensure the reaction takes place, it is essential to remove all traces of water. This can be accomplished by drying the glassware in an oven. Drying the glassware helps to eliminate any water molecules that may be present on the surface of the glass.
Additionally, the reaction must be kept dry in order to prevent any water molecules in the air from reacting with the Grignard reagent. If water molecules were to come into contact with the Grignard reagent, it would react with the reagent and terminate the reaction.
As a result, keeping the reaction dry and using oven-dried glassware are essential steps in performing a successful Grignard reaction.
To know more about Grignard reaction click on below link:
https://brainly.com/question/30887693#
#SPJ11
cephalosporin c is an antibiotic containing multiple functional groups. which functional groups are present in this molecular? (select all that apply).
Cephalosporin C is an antibiotic containing multiple functional groups. The functional groups present in this molecular are an amide, an alcohol, and an amine.
An amide is a functional group composed of a carbonyl group (C=O) bound to a nitrogen atom. An alcohol is a functional group composed of an oxygen atom bonded to a hydrogen atom, and an amine is a functional group composed of a nitrogen atom bound to two hydrogen atoms.
The amide functional group is present in cephalosporin C because it contains an amide nitrogen atom connected to a carbonyl carbon atom. The alcohol functional group is present in cephalosporin C because it contains an alcohol oxygen atom connected to a hydrogen atom. The amine functional group is present in cephalosporin C because it contains an amine nitrogen atom connected to two hydrogen atoms.
In conclusion, cephalosporin C is an antibiotic containing multiple functional groups, which are an amide, an alcohol, and an amine.
Learn more about cephalosporin here:
https://brainly.com/question/28895176#
#SPJ11
in valence bond theory, covalent bonds are described in terms of the overlap of atomic or hybrid orbitals. group of answer choices true false
In valence bond theory,
covalent
bonds are described in terms of the overlap of atomic or hybrid orbitals. This statement is true. Covalent bonds are described in terms of the overlap of atomic or hybrid orbitals
A covalent bond is a chemical bond that arises from the mutual sharing of electrons between atoms. It is formed when two atoms share a pair of electrons, with each atom contributing one electron to the pair.
In valence bond theory, covalent bonds are explained by the overlap of atomic or hybrid orbitals.
Orbitals
are regions of space around an atomic nucleus where an electron is most likely to be found.
An atomic orbital can hold a maximum of two electrons with opposite spins. Each atom has a certain number of valence electrons in its outermost shell.
These valence electrons can participate in the formation of chemical bonds.
During the formation of a covalent bond, the valence orbitals of the two atoms overlap with each other, allowing their valence
electrons
to interact and form a shared electron pair.
The degree of overlap between the atomic orbitals determines the strength of the covalent bond. The greater the overlap, the stronger the bond. The shape of the orbitals also affects the type of bond that is formed.
For example, when two s orbitals overlap, a sigma bond is formed, while when two p orbitals overlap, a pi bond is formed.
In hybrid orbitals, the orbitals of different shapes and energies can combine to form a new set of orbitals that are better suited for bonding.
In valence bond theory, covalent bonds are described in terms of the overlap of atomic or hybrid orbitals. This theory explains how atoms bond with each other and form new molecules.
to know more about
covalent
refer here:
https://brainly.com/question/30261436#
#SPJ11
How does matter, such as carbon, move through an environment?
Carbon and other types of matter can move through the environment through a combination of physical, biological, and human processes.
How does matter, such as carbon, move through an environment?Matter, including carbon, can move through an environment in several ways, including:
Diffusion: Diffusion is the movement of particles from an area of high concentration to an area of low concentration. Carbon can diffuse through the air or water from areas where it is more concentrated to areas where it is less concentrated.
Advection: Advection is the movement of matter due to the flow of a fluid, such as air or water. Carbon can be transported through the environment by advection, for example, by wind carrying carbon particles or by water currents transporting dissolved carbon.
Biogeochemical cycling: Carbon can also be cycled through the environment by biological and geological processes. Plants and algae take up carbon dioxide from the air or dissolved carbon from water and convert it into organic matter through photosynthesis. This organic matter can then be consumed by other organisms, leading to the transfer of carbon through the food chain. Carbon can also be stored in soils and sediments for long periods of time.
Human activities: Human activities can also move carbon through the environment. For example, the burning of fossil fuels releases carbon dioxide into the atmosphere, which can then be transported by diffusion and advection. Land-use changes, such as deforestation, can also affect the cycling of carbon through the environment.
Learn more about matter here: https://brainly.com/question/3998772
#SPJ1
when fecl3 is ignited in an atmosphere of pure oxygen, this reaction takes place if 3.00 moles of fecl3 is ignited in the presence of 2.00 moles of o2 gas, how much of which reagent is present in excess and therefore remains unreacted?
The excess reagent is FeCl₃ and 0.33 moles of FeCl₃ remains unreacted after igniting 3.00 moles of FeCl₃ with 2.00 moles of O₂ gas.
The balanced chemical equation for the reaction between FeCl₃ and O₂ is:
4 FeCl₃ + 3 O₂ → 2 Fe₂O₃ + 6 Cl₂
From the balanced equation, we can see that for every 4 moles of FeCl₃, we need 3 moles of O₂.
To determine what is the excess reagent and how much of it is left over, we need to calculate the amount of each reagent required for complete reaction:
3.00 moles FeCl₃ × (3 moles O₂/4 moles FeCl₃) = 2.25 moles O₂ required
2.00 moles O₂ × (4 moles FeCl₃/3 moles O₂) = 2.67 moles FeCl₃ required
Since we only have 2.00 moles of O₂ available, this is the limiting reagent and there is not enough O₂ to react completely with all 3.00 moles of FeCl₃. Therefore, FeCl₃ is the excess reagent.
The amount of excess reagent remaining can be calculated by subtracting the amount required for complete reaction from the amount initially present:
Excess FeCl₃ = 3.00 moles - 2.67 moles = 0.33 moles
Therefore, there is an excess of 0.33 moles of FeCl₃ remaining unreacted. There is no excess of O₂ remaining, as we started with less than the amount required for complete reaction.
Learn more about excess reagent here: https://brainly.com/question/29109077.
#SPJ11
the complex process whereby silicate minerals such as feldspar are broken down to make clay minerals by reacting with water molecules is .
The complex process whereby silicate minerals such as feldspar are broken down to make clay minerals by reacting with water molecules is known as hydrolysis.
Hydrolysis is the process of breaking down a compound by adding water to it. It is a chemical process in which water reacts with minerals to form new compounds with new structures. The process is a crucial part of the formation of clay minerals. Hydrolysis is a common process in nature and occurs when water reacts with minerals to form new compounds. This reaction occurs in soil, rocks, and other natural materials.
The hydrolysis process breaks down minerals such as feldspar and releases other minerals like aluminum and iron oxides. The hydrolysis of silicate minerals such as feldspar creates clay minerals. This process is responsible for the formation of clay minerals, which are an important component of soil.
Read more about silicate :
https://brainly.com/question/4938885
#SPJ11
what are two design improvements that can be made to the flameless ration heater that to make it safer for air travel and more efficient at heating objects?
Answer:
1) adding a safety switch that automatically turns off the heater when it reaches a certain temperature
2) incorporating reflective material around the heating element to increase heat output.
Explanation:
chatgpt
a solution contains 15.0 g of glycine, c2h5no2, in a total solution volume of 0.330 l. what is the concentration of glycine in the solution?
The concentration of glycine in the given solution is 0.066 M.
Concentration is defined as the amount of solute per unit volume of the solution.
Thus, the formula for calculating the concentration (C) of a solution is:
C = n/V
Where C is the concentration, n is the number of moles of solute, and V is the volume of the solution.
The formula for calculating the number of moles of a solute is given as:
m = n x M
Where m is the mass of the solute, n is the number of moles of solute, and M is the molar mass of the solute.
Using the formula given above, we can calculate the concentration of glycine in the given solution:
C = m/M x V
We know that the mass of glycine is 15.0 g and its molar mass is M(C₂H₅NO₂) = 75.07 g/mol
Substituting the given values, we get:
C = 15.0/75.07 × 0.330L= 0.066 M
Therefore, the concentration of a solution containing 15.0 g of glycine, C₂H₅NO₂, in a total solution volume of 0.330 l is 0.066 M.
To know more about concentration, refer here:
https://brainly.com/question/10725862#
#SPJ4
I need help on this rq
which one of the following molecules has the highest molecular weight? group of answer choices acetyl coa alpha-ketoglutarate. oxaloacetate citrate isocitrate
molecules in which three atoms are arranged in a straight line are said to have ? geometry. quiz
Answer: Molecules in which three atoms are arranged in a straight line are said to have linear geometry.
What is a linear molecule?
A linear molecule is a molecule that has three or more atoms arranged in a straight line. Two main groups of linear molecules exist: homonuclear and heteronuclear. A homonuclear linear molecule has two or more identical atoms bonded to the central atom, whereas a heteronuclear linear molecule has two or more distinct atoms bonded to the central atom.
Examples of linear molecules include carbon dioxide (CO2), hydrogen cyanide (HCN), nitrogen dioxide (NO2), and sulfur dioxide (SO2).
Linear geometry is the shape of the molecule, which is governed by its geometry. The distribution of bonding electrons and non-bonding pairs in a molecule determines its shape. For instance, in a molecule with linear geometry, the bond angle between two atoms is 180 degrees (a straight line).
Learn more about linear molecule here:
https://brainly.com/question/16770400#
#SPJ11
what is the term for the weighted average mass of all the naturally occurring isotopes of an element? group of answer choices atomic notation atomic number atomic mass mass number none of the above
Answer: The term for the weighted average mass of all the naturally occurring isotopes of an element is atomic mass.
This is also known as the atomic weight and is the mass of a single atom of the element. It is calculated by taking the weighted average of the masses of all the isotopes of an element.
The isotopes are weighted according to their abundance in nature. The atomic mass is typically expressed in atomic mass units (amu) or in daltons (Da). The atomic mass is an important factor in determining the chemical and physical properties of an element. It is also used in calculating the energy released during nuclear reactions.
Learn more about atomic mass here:
https://brainly.com/question/17067547#
#SPJ11
The reaction of 44.1 g of Cr203 with 35.0 g of Al produced 25.6 g of Cr. What is the percent yield for this reaction?
2Al + Cr203 + Al203 + 2Cr
To determine the percent yield, we need to first calculate the theoretical yield of the reaction using stoichiometry, and then divide the actual yield by the theoretical yield and multiply by 100%. The percent yield of the reaction is approximately 84.9%.
What is percent yield?Percent yield is a measure of the efficiency of a chemical reaction, calculated by dividing the actual yield of a reaction by the theoretical yield and multiplying by 100%. It represents the percentage of the theoretical amount of product that was actually obtained in a reaction.
The balanced chemical equation is:
2Al + Cr₂O₃ → Al₂O₃ + 2Cr
The molar mass of Cr₂O₃ is 152 g/mol, the molar mass of Al is 27 g/mol, and the molar mass of Cr is 52 g/mol.
We need to determine which reactant is limiting, so we can calculate the theoretical yield based on the amount of limiting reactant. We can do this by calculating the number of moles of each reactant using their molar masses and dividing by their stoichiometric coefficients in the balanced equation:
moles of Cr₂O₃= 44.1 g / 152 g/mol = 0.29 mol
moles of Al = 35.0 g / 27 g/mol = 1.30 mol
From the balanced equation, we see that 1 mole of Cr2O3 reacts with 2 moles of Cr. Therefore, the theoretical yield of Cr is:
moles of Cr produced = 0.29 mol Cr₂O₃x (2 mol Cr / 1 mol Cr₂O₃) = 0.58 mol Cr
mass of Cr produced = 0.58 mol Cr x 52 g/mol = 30.16 g Cr
The percent yield is:
% yield = (actual yield / theoretical yield) x 100%
% yield = (25.6 g Cr / 30.16 g Cr) x 100% = 84.9%
Therefore, the percent yield of the reaction is approximately 84.9%.
To find out more about percent yield, visit:
https://brainly.com/question/17042787
#SPJ1
write a series containing -CHO as a functional group.
write the iupac name of 4th member of carboxylic acid,1st member of amide and 3rd member of acid chloride .
help me with these ToT
Answer:
The -CHO group is known as the aldehyde functional group. Here are some examples of organic compounds containing the -CHO functional group:
Methanal (formaldehyde)
Ethanal (acetaldehyde)
Propanal (propionaldehyde)
Butanal (butyraldehyde)
Pentanal (valeraldehyde)
IUPAC names of the requested compounds are:
4th member of carboxylic acid: butanoic acid
1st member of amide: formamide
3rd member of acid chloride: propanoyl chloride (also known as propionyl chloride)
The IUPAC name of the fourth member of the series is Butanal
What is the series?The "-CHO" functional group is known as an aldehyde, and it can be found in a variety of organic compounds. Here are some examples of compounds that contain the "-CHO" functional group:
Methanal (formaldehyde): CH2O
Ethanal (acetaldehyde): C2H4O
Propanal (propionaldehyde): C3H6O
Butanal (butyraldehyde): C4H8O
Pentanal (valeraldehyde): C5H10O
Hexanal (caproaldehyde): C6H12O
Heptanal (enanthic aldehyde): C7H14O
Octanal (caprylic aldehyde): C8H16O
Nonanal (pelargonic aldehyde): C9H18O
Decanal (capric aldehyde): C10H20O
Learn more about functional group:https://brainly.com/question/14618322
#SPJ1
What is the molarity of a 4. 46L solution containing 9. 38 mol of Barium Chlorate?
The molarity of the 4.46 L solution containing 9.38 mol of barium chlorate is 2.10 M.
The molarity of a solution is a measure of the concentration of a solute in the solution. It is defined as the number of moles of solute per liter of solution. To calculate the molarity of a solution, we need to divide the number of moles of the solute by the volume of the solution in liters.
Given that the solution contains 9.38 mol of barium chlorate and has a volume of 4.46 L, we can calculate the molarity (M) as,
Molarity = Number of moles of solute / Volume of solution in liters
Molarity = 9.38 mol / 4.46 L
Molarity = 2.10 M
To know more about Barium Chlorate, here
brainly.com/question/15097261
#SPJ4
224g koH is dissoved in water to make 2litres of solution?
The concentration of the KOH solution is 1.995 mol/L.
To find the concentration of the KOH solution, we need to calculate the number of moles of KOH in the solution:
Calculate the molecular weight of KOH:
K = 39.1 g/mol
O = 16.0 g/mol
H = 1.0 g/mol
Molecular weight of KOH = 39.1 + 16.0 + 1.0 = 56.1 g/mol
Calculate the number of moles of KOH:
mass of KOH = 224 g
Number of moles = mass/molecular weight = 224/56.1 = 3.99 moles
Calculate the concentration of KOH solution:
Volume of solution = 2 L = 2000 mL
Concentration = number of moles/volume of solution = 3.99 moles/2000 mL = 0.001995 moles/mL or 1.995 mol/L
Therefore, the concentration of the KOH solution is 1.995 mol/L.
To know more about concentration click here:
brainly.com/question/10725862
#SPJ4
What mass of salt solution is made when 19 g of salt is dissolved in 55 g of water?
Answer:
74g.
Explanation:
The volume won't increase by the volume of salt you added, though. This is for many different reasons among them the fact that salt is in grains (with lots of air in between) and the salt dissolving in the water and kind of squeezing in the spaces between water molecules. But the mass should increase by exactly the 19g you added.
How many grams of carbon monoxide does a 3.0-L balloon contain?
If the balloon is popped and all of the CO2 is released, approximately 5.4 grams of CO2 would be released.
What is STP?At STP (Standard Temperature and Pressure), the pressure is 1 atmosphere (atm) and the temperature is 273.15 K (0 °C or 32 °F).Any ideal gas has a molar volume of 22.4 L/mol at STP.
Carbon dioxide (CO2) seems to have a molar mass of approximately 44 g/mol.
Using the ideal gas law, PV = nRT, we can calculate the number of moles of CO2 in the balloon:
PV = nRT
n = PV/RT
n = (1 atm)(3 L)/(0.0821 L·atm/mol·K)(273.15 K)
n = 0.1226 mol
Therefore, the balloon contains 0.1226 mol of CO2.
To calculate the mass of CO2, we can use the following formula:
mass equates to the number of moles multiplied by the molar massmass = 0.1226 mol x 44 g/mol
mass = 5.4 g
To know more about ideal gas law, visit:
https://brainly.com/question/28257995
#SPJ1
1. a solution is made by dissolving 170.1 g of glucose (c6h12o6) in enough water to make a liter of solution. the density of the solution is 1.062 g/ml. express the concentration of the solution in
Answer: The molarity of the glucose solution is 0.94 moles/liter, or 0.94 M.
The concentration of the glucose solution can be expressed as molarity. Molarity is a measure of the number of moles of solute in one liter of a solution. To calculate the molarity, you need to determine the number of moles of glucose in the solution.
To do this, you need to know the molar mass of glucose, which is 180.156 g/mol. Therefore, 170.1 g of glucose would equal 0.94 moles of glucose.
To calculate the molarity, divide the number of moles of glucose by the volume of the solution. The volume of the solution is 1 liter. Therefore, the molarity of the glucose solution is 0.94 moles/liter, or 0.94 M.
The concentration of a solution can be expressed as molarity, which is a measure of the amount of solute in one liter of a solution. To calculate molarity, you need to know the molar mass of the solute, and divide the number of moles of the solute by the volume of the solution.
In this case, the molar mass of glucose is 180.156 g/mol, and 170.1 g of glucose would equal 0.94 moles of glucose. The volume of the solution is 1 liter, and thus the molarity of the glucose solution is 0.94 moles/liter, or 0.94 M.
Learn more about concentration here:
https://brainly.com/question/10725862#
#SPJ11
Indicate if the following pairs of compounds could be separated via liquid-liquid extraction.First, draw the structures of the compounds, next determine whether they are acids or bases or neutral. Finally, look up their pKa (or pKb) values and indicate which aqueous solution would separate them or if they are inseparable. Assume that you can utilize aqueous HCl, NaOH, or NaHCO3 for your extractions. For each case that will not work, give the reason.You don't have to draw structure, just explain if they are able to be separated or not and with what and why.1. picric acid and phenol2. salicyclic acid and phenol3. triethylamine and diethylamine4. 3-nitrobenzoic acid and 2-nitrobenzoic acid5. benzylamine and aniline
Picric acid and phenol, Salicylic acid and phenol & Benzylamine and aniline can be separated using liquid-liquid extraction but Triethylamine and diethylamine & 3-nitrobenzoic acid and 2-nitrobenzoic acid cannot be separated using liquid-liquid extraction.
1. Picric acid and phenol can be separated using liquid-liquid extraction. Picric acid is a stronger acid (pKa ~0.4) than phenol (pKa ~10). Adding aqueous NaOH will deprotonate picric acid and make it soluble in the aqueous layer, while phenol remains in the organic layer. Then, the two compounds can be separated.
2. Salicylic acid and phenol can also be separated using liquid-liquid extraction. Salicylic acid (pKa ~3) is more acidic than phenol (pKa ~10). Adding aqueous NaHCO3 will deprotonate salicylic acid, making it soluble in the aqueous layer, while phenol remains in the organic layer. The compounds can then be separated.
3. Triethylamine and diethylamine cannot be easily separated via liquid-liquid extraction, as both are bases (pKb values are similar). Aqueous HCl, NaOH, or NaHCO3 will not be effective in separating these compounds. Alternative separation methods, like distillation, may be needed.
4. 3-nitrobenzoic acid and 2-nitrobenzoic acid cannot be separated using liquid-liquid extraction, as they have similar acidity (pKa values are close) and will react similarly with HCl, NaOH, or NaHCO3. Alternative separation methods, like chromatography, should be considered.
5. Benzylamine and aniline can be separated using liquid-liquid extraction. Benzylamine is a weaker base (pKb ~4.2) than aniline (pKb ~9.4). Adding aqueous HCl will protonate aniline, making it soluble in the aqueous layer, while benzylamine remains in the organic layer. The two compounds can then be separated.
To learn more about picric acid; https://brainly.com/question/14866072
#SPJ11
Which of these is not a component of Rutherford’s model of the atom?
The Rutherford's model lacks an atom's electrical structure and electromagnetic radiation.
What elements make up Rutherford's atomic model?According to the idea, an atom has a tiny, compact, positively charged center called a nucleus, where almost all of the mass is concentrated, while light, negatively charged particles called Like planets circle the Sun, electrons also travel a great distance around it. Rutherford discovered that an atom's interior is mostly empty.
What does Rutherford's conclusion leave out?Rutherford's alpha scattering experiment did not come to any conclusions on how quickly positively charged particles travel. The nucleus, or core, of the atom contains the positively charged particles.
To know more about Rutherford's model visit:-
https://brainly.com/question/11749615
#SPJ1
carbon dioxide (co2) contains c-o bonds. which if the following statements are true about the bonding electrons in this molecule?
a. The bonding electrons will be shared equality between C and O atoms
b. The bonding electrons will spend more time around the O atom as it attracts the electrons more strongly
c. The bonding electrons will spend more time around the C atom as it attreacts the electrons more strongly
d. The bonding electrons will spend more time around the C atom as it needs an octet of electrons more than the O atom
The true statement given about the bonding electrons is option b. "The bonding electrons will spend more time around the O atom as it attracts the electrons more strongly".
Carbon dioxide is a linear molecule that consists of two oxygen atoms and one carbon atom. The C-O bond in [tex]CO_2[/tex] is polar, which means that the electrons are shared unequally between the atoms. As oxygen is more electronegative than carbon, it attracts the electrons more strongly, and hence, the bonding electrons spend more time around the O atom than the C atom.
In other words, option b is the correct statement about the bonding electrons in carbon dioxide ([tex]CO_2[/tex]) molecule.
Thus bonding electron spends more time around the O atom as it attracts the electrons more strongly than the C atom.
Therefore correct option is b. The bonding electrons will spend more time around the O atom as it attracts the electrons more strongly.
To learn more about bonding refer to: https://brainly.com/question/30004630
#SPJ11
) assume a basis of 1 mole of feed and draw and label a flowchart. carry out a degree-of-freedom analysis of the reactor based on the extent of reaction. (b) calculate the total moles of gas in the reactor at equilibrium and then the equilibrium mole fraction of hydrogen in the product. (c) suppose a gas sample is drawn from the reactor and analyzed shortly after startup and the mole fraction of hydrogen is significantly different from the calculated value. assuming the calculations are correct, what is a likely explanation for the discrepancy? (d) use a method numerical method of your choice to take the input of the reactor temperature and the input feed component mole fractions of co, h2o, and co2 (assume no hydrogen is fed) and to calculate the mole fraction h2 x in the product gas when equilibrium is reached. present your results in a table. use your numerical method to try and maximize the yield of hydrogen by adjusting the temperature and feed composition.
you need to draw and label a flowchart and carry out a degree-of-freedom analysis of the reactor based on the extent of reaction, then calculate the total moles of gas in the reactor at equilibrium and the equilibrium mole fraction of hydrogen in the product.
If the mole fraction of hydrogen is significantly different from the calculated value, the discrepancy can likely be attributed to an imbalance between the reactants and products.
You can use a numerical method of your choice to take the input of the reactor temperature and the feed component mole fractions of CO, H2O, and CO2 to calculate the mole fraction H2 x in the product gas when equilibrium is reached.
From there, you can adjust the temperature and feed composition to maximize the yield of hydrogen.
To know more about mole fraction click on below link:
https://brainly.com/question/29808190#
#SPJ11
what type of fire is self-heating? diffusion flame spontaneous combustion pre-mixed flame smoldering
The type of fire that is self-heating is spontaneous combustion. This occurs when a combustible material (such as paper, rags, oil, and even coal) is heated to its ignition temperature through a process of oxidation. The heat produced from the oxidation will then cause the material to burn.
combustion refers to a fire that starts on its own due to heat generated by chemical reactions rather than an external source. This type of fire typically happens in organic materials that produce heat during natural decay, such as hay or wood chips that have been compressed or stored in large quantities. When the heat produced by these chemical reactions surpasses the material's ability to dissipate it, the temperature will keep rising until the material catches fire. The other types of fire are as follows:
Diffusion flame A diffusion flame is a fire that occurs when a fuel source is mixed with air and burned in the presence of an oxidizer. Diffusion flames are common in industry and can be found in applications like boilers, furnaces, and power plants
.Premixed flame A pre-mixed flame is a type of flame that occurs when a fuel source is mixed with air before it is ignited. This type of flame is often used in internal combustion engines.
Smoldering A smoldering fire is a slow, low-temperature flame that occurs when materials like embers or coals continue to burn without visible flame. This type of fire is often found in wildfires, and it can be very dangerous because it can spread underground or in places where people might not see it.
For more such questions on spontaneous combustion , Visit:
https://brainly.com/question/30392290
#SPJ11
which solution could be used to precipitate the barium ion, ba2 , in a water sample: sodium chloride, sodium hydroxide, or sodium sulfate? what is the formula for the expected precipitate?
The solution to precipitate the barium ion, Ba²⁺, in a water sample is sodium sulfate.
The expected precipitate is BaSO4, or barium sulfate. Barium sulfate is an insoluble salt, which means that when sodium sulfate is added to the water sample, barium sulfate will form and settle out of the solution.
Sodium sulfate reacts with barium ions in the water sample to form the insoluble salt BaSO4 according to the following equation: Ba²⁺ + SO4²⁻ --> BaSO4. Since BaSO4 is insoluble in water, it will settle out of solution.
This process is known as precipitation. Precipitation occurs when a soluble compound is converted to an insoluble one.
To know more about Precipitation click on below link:
https://brainly.com/question/18109776#
#SPJ11
calculate the molarity of a solution made by dissolving 1.25moles of na2cro4 in enough water to form exactly 0.550 l of solution.
2.27 M is the molarity of a solution made by dissolving 1.25moles of Na[tex]_2[/tex]CrO[tex]_4[/tex] in enough water to form exactly 0.550 l of solution.
A chemical solution's concentration is measured in molarity (M). It refers to the solute's moles per litre of solution. Keep in mind that this is not the same as solvent in litres (a common error). Although molarity is a useful unit, it does have one significant drawback. Temperature impacts a solution's volume, therefore when the temperature varies, it does not stay constant. Typically, you convert grammes of solute to moles and then divide this quantity by litres of solution because you cannot measure solute in moles physically.
Molarity = moles of solute/volume of solution in liters
Molarity = 1.25 moles/0.550 L = 2.27 M
To know more about molarity, here:
https://brainly.com/question/31545539
#SPJ12
all of these quantities except one must be zero for this constant pressure process at 300k and 1 atm. which quantity is nonzero?
The nonzero quantity is Heat Transfer.
Heat Transfer is the only quantity that must be nonzero for a constant pressure process at 300K and 1 atm. This is because Heat Transfer is the amount of energy that is required to maintain constant pressure.
All other quantities in this process, such as Work, Internal Energy, and Enthalpy, are zero for a constant pressure process at a given temperature and pressure.
Therefore, the quantity that is nonzero for this constant pressure process at 300k and 1 atm is Heat Transfer.
To know more about Heat Transfer, refer here:
https://brainly.com/question/13433948#
#SPJ11
the solubility of sodium chloride at room room temperature is 35.8g of nacl per 135.8 g of solution and the density of this solution is 1.20g/ml. calculate the molarity of a saturated solution of nacl
Answer:
5.41 M
Explanation:
To calculate the molarity of a saturated solution of NaCl, we first need to calculate the amount of NaCl in the solution:
35.8 g of NaCl per 135.8 g of solution means that the mass of NaCl in the solution is:
mass of NaCl = 35.8 g
The density of the solution is 1.20 g/mL, so the volume of the solution can be calculated as:
volume of solution = mass of solution / density of solution
volume of solution = 135.8 g / 1.20 g/mL
volume of solution = 113.17 mL
Now we need to convert the volume of the solution to liters:
volume of solution = 113.17 mL = 0.11317 L
To calculate the molarity of the solution, we need to know the number of moles of NaCl in the solution. We can calculate this using the formula:
moles of solute = mass of solute / molar mass of solute
The molar mass of NaCl is 58.44 g/mol, so:
moles of NaCl = 35.8 g / 58.44 g/mol
moles of NaCl = 0.612 mol
Now we can calculate the molarity of the solution using the formula:
molarity = moles of solute / liters of solution
molarity = 0.612 mol / 0.11317 L
molarity ≈ 5.41 M