what is the midpoint of 70 and 90

Answers

Answer 1

Answer:

80

Step-by-step explanation:

Just average the two numbers to get (70+90)/2 = 160/2 = 80

Answer 2

Answer:

Step-by-step explanation:

To find the midpoint between two numbers, you add them together and divide the sum by 2.

In this case, the midpoint between 70 and 90 would be:

(70 + 90) / 2 = 160 / 2 = 80.

Therefore, the midpoint between 70 and 90 is 80.


Related Questions

A charged particle produces an electric field with a magnitude of 2.0 N/C at a point that is 50 cm away from the particle. a) Without finding the charge of the particle, determine the electric field produced by this charge at a point 25 cm away from it. b) What will happen to the Electric field at the distance 50 cm, if you double the charge? c) What is the magnitude of the particle’s charge?

Answers

To solve these problems, we can use Coulomb's Law, which states that the magnitude of the electric field produced by a charged particle is directly proportional to the charge and inversely proportional to the square of the distance from the particle.

a) Without finding the charge of the particle, we can use the inverse square relationship. If the electric field magnitude is 2.0 N/C at a distance of 50 cm, then at half the distance (25 cm), the electric field would be four times stronger. Therefore, the electric field at 25 cm would be 4 * 2.0 N/C = 8.0 N/C.

b) Doubling the charge would result in doubling the electric field magnitude. So, if the electric field at a distance of 50 cm was initially 2.0 N/C, it would become 4.0 N/C after doubling the charge.

c) To determine the magnitude of the particle's charge, we need to use the equation for the electric field:

E = k * (|q| / r^2)

where E is the electric field magnitude, k is the electrostatic constant, |q| is the magnitude of the charge, and r is the distance from the particle.

Using the known values of E = 2.0 N/C and r = 50 cm (or 0.5 m), we can rearrange the equation to solve for |q|:

|q| = E * r^2 / k

Substituting the values and the known value of k, we can calculate the magnitude of the charge.

For more such questions on Coulomb's Law

https://brainly.com/question/28143917

#SPJ8

When parallel lines are intersected by a transversal, which of the following angle pairs are supplementary?

Answers

Answer:

if two parallel lines are cut by a transversal,then, exterior angles on the same side of the transversal are supplementary!

Step-by-step explanation:

I don't really know how to explain it but I hope this helped!

On a number line, a number, b, is located the same distance from 0 as another number, a, but in the opposite direction.
The number b varies directly with the number a. For example b = 22 when a = -22. Which equation represents this
direct variation between a and b?
b=-a
0-b=-a
O b-a=0
Ob(-a)=0

Answers

The equation that represents the direct variation between a and b in this scenario is:

b = -a

This equation states that b is equal to the opposite of a, which aligns with the given information that b is located the same distance from 0 as a but in the opposite direction.

Select the correct answer. What is the solution to this equation? 9^x - 1 = 2 O A. - 1/1/20 OB. 2 O C. OD. 1/1/20 1 23 Edmentum. All rights reserved. Reset Next​

Answers

Answer:

D. 1/2

Step-by-step explanation:

9^x - 1 = 2

9^x = 3

x = log{sub}9 (3)

x = 1/2 (9^(1/2)=3)

Pls help I am stuck thank you so much

Answers

The perimeter of shape C is 30 cm shorter than the total perimeter of A and B.

What is the perimeter of a polygon?

The perimeter of a polygon is given by the sum of all the lengths of the outer edges of the figure, that is, we must find the length of all the edges of the polygon, and then add these lengths to obtain the perimeter.

Hence the perimeter of each shape is given as follows:

A = 2 x (5 + 12) = 34 cm.B = 2 x (4 + 9) = 26 cm.C = 12 + 5 + 9 + 4 = 30 cm.

Then the difference is given as follows:

34 + 26 - 30 = 30 cm.

More can be learned about the perimeter of a polygon at https://brainly.com/question/3310006

#SPJ1

Question #3
Solve for x
OOO
O 10
07
5
8
6x+8
N
p
U
K
122°
L
M
194°

Answers

The calculated value o x in the circle is 7

How to determine the solution for x

From the question, we have the following parameters that can be used in our computation:

The circle

The value of x can be calculated using teh equation of the intersection of chords

So, we have

122 = 1/2(6x + 8 + 194)

Evaluate

244 = 6x + 202

So, we have

6x = 42

Divide by 6

x = 7

Hence, the solution for x is 7

Read more about circles at

https://brainly.com/question/32192505

#SPJ1

A box contains 240 lumps of sugar. Five lumps are fitted across the box and there were three layers. How many lumps are fitted along the box?

Answers

If five lumps of sugar are fitted across the box, and there are three layers, we can calculate the total number of lumps by multiplying the number of lumps across each layer by the number of layers.

Number of lumps across each layer = 5
Number of layers = 3

Total number of lumps = Number of lumps across each layer × Number of layers
Total number of lumps = 5 × 3 = 15

Therefore, 15 lumps of sugar are fitted along the box.


If it’s possible, please mark me brainliest!

find the inverse of each function

Answers

Answer:

c

Step-by-step explanation:

assume base 10

-logy = x

[tex] \frac{1}{ log(y) } = x[/tex]

log base x y = 5 turns into the format x^ 5 = y

implement that to get c

determine the value of x​

Answers

The hypotenuse (x) of the right triangle is 10 units

Finding the hypotenuse of the right triangle

From the question, we have the following parameters that can be used in our computation:

The right triangle

The hypotenuse (x) of the right triangle can be calculated using the following sine equation

sin(30) = 5/x

Using the above as a guide, we have the following:

x = 5/sin(30)

Evaluate

x = 10

Hence, the hypotenuse of the right triangle is 10

Read more about right triangle at

brainly.com/question/2437195

#SPJ1

The height of a rectangular box is 7 ft. The length is 1 ft longer than thrice the width x. The volume is 798 ft³.
(a) Write an equation in terms of x that represents the given relationship.
The equation is

Answers

The equation in terms of x that represents the given relationship is 114 = (1 + 3x) * (Width)

Let's break down the information given:

Height of the rectangular box = 7 ft

Length of the rectangular box = 1 ft longer than thrice the width (x)

Volume of the rectangular box = 798 ft³

To write an equation that represents the given relationship, we need to relate the length, width, and height to the volume.

The volume of a rectangular box is given by the formula: Volume = Length * Width * Height.

Given that the height is 7 ft, we can substitute this value into the equation.

Volume = (Length) * (Width) * (7)

Now, let's focus on the length. It is described as 1 ft longer than thrice the width.

Length = 1 + (3x)

Substituting this value into the equation, we have:

Volume = (1 + (3x)) * (Width) * (7)

Since the volume is given as 798 ft³, we can set up the equation as follows:

798 = (1 + (3x)) * (Width) * 7

Simplifying further, we get:

798 = 7 * (1 + 3x) * (Width)

Dividing both sides of the equation by 7, we have:

114 = (1 + 3x) * (Width)

Therefore, the equation in terms of x that represents the given relationship is:

114 = (1 + 3x) * (Width)

For more question on equation visit:

https://brainly.com/question/17145398

#SPJ8

CAN SOMEONE HELPPPPPP

Answers

Answer:

∠1 = 100

∠2 = 110

Step-by-step explanation:

∠1  + 80 = 180(angles on a straight line add to 180)

∠1 = 180 - 80

∠1 = 100

∠2 = 110 (vertically opposite angles are equal)

witch of the following would be a good name for the function that takes the length of a race and returns the time needed to complete it
a. length(time)
b.Time(race)
c.time(length)
d.cost(time)

Answers

The most appropriate name for the function that takes the length of a race and returns the time needed to complete it would be "time(length)".

When choosing a name for a function, it is important to consider clarity and readability. The name should accurately describe the purpose of the function and provide a clear indication of what it does.

In this case, the function is expected to take the length of a race as input and return the time needed to complete it as output. Among the given options, "time(length)" is the most suitable choice.

a. length(time): This name suggests that the function takes time as input and returns the length. However, in this scenario, we are interested in finding the time needed to complete the race based on its length, so this option is not the best fit.

b. Time(race): This name implies that the function takes a race as input and returns the time. While it conveys the idea of finding the time, it doesn't explicitly mention that the input is the length of the race, making it less clear.

c. time(length): This option accurately describes the purpose of the function, indicating that it takes the length of the race as input and returns the corresponding time. It is concise, clear, and aligns with the conventional naming conventions for functions.

d. cost(time): This name suggests that the function calculates the cost based on time, which is not relevant to the scenario of finding the time needed to complete a race.

Therefore, "time(length)" is the most suitable and appropriate name for the function.

For more such questions on function, click on:

https://brainly.com/question/11624077

#SPJ8

Polygon s is a scaled copy of polygon R.

What is the value of t

Answers

Using the concept of scale factor, the value of t in polygon s is:  7.2

How to use the scale factor?

The amount by which the shape is expanded or contracted is referred to as the scale factor. This is usually utilized when 2D shapes such as circles, triangles, squares and rectangles need to be enlarged. If y = Kx is an equation, K is the scaling factor for x.

From the given image, since Polygon s is a scaled copy of polygon R, then we can say that using the concept of scale factor, we have:

9/t = 12/9.6

t = (9 * 9.6)/12

t = 7.2

Thus, we can be sure that is the value of t of the polygon S using the concept of scale factor

Read more about Scale Factor at: https://brainly.com/question/25722260

#SPJ1

A bag of marbles contains 2 blue marbles, 4 red marbles 6 green marbles

Answers

Answer:

We start with 17 marbles, 4 of which are red. So P(first marble is red) = 4/17. Since the red marble is not replaced, there are now 16 marbles, 3 of which are red. So P(second marble is red) = 3/16.

The correct calculation is

P(red, then red) = 4/17 × 3/16

Solve the proportion for the missing values 5/12 = x/20

Answers

Answer:

x = 5

Step-by-step explanation:

We can solve for x in this proportion, or an equation of ratios, by multiplying both sides by 20.

[tex]{/}\!\!\!\!\!{20}\cdot \dfrac{5}{{/}\!\!\!\!\!20}=\dfrac{x}{{/}\!\!\!\!\!20} \cdot {/}\!\!\!\!\!20[/tex]

We can see that the 20s cancel in the numerator and denominator in both sides, and the equation is solved for x:

[tex]x = 5[/tex]

X = 5
Step-by-step explanation:
We can solve for x in this proportion, or an equation of ratios, by multiplying both sides by 20.
5
⅔⅜=
2020
We can see that the 20s cancel in the numerator and denominator in both sides, and the equation is solved for x:
7 = 5

The area of the figure is square units.

3 units, 8 units, 3 units, 9 units, 3 units, 21 units

Answers

The area of the figure is 114 square units.

To determine the area of the figure, we need to identify its shape.

From the given dimensions, it appears that we have three rectangular sections.

The first section has a length of 3 units and a width of 8 units, giving us an area of 3 [tex]\times[/tex] 8 = 24 square units.

The second section has a length of 3 units and a width of 9 units, resulting in an area of 3 [tex]\times[/tex] 9 = 27 square units

The third section has a length of 3 units and a width of 21 units, yielding an area of 3 [tex]\times[/tex] 21 = 63 square units.

To find the total area of the figure, we need to sum up the areas of the individual sections:

Total area = 24 + 27 + 63 = 114 square units.

Therefore, the area of the figure is 114 square units.

It's important to note that without a clear description or diagram of the figure, it's challenging to provide an accurate interpretation.

The given dimensions could represent various arrangements, and the resulting area would vary accordingly.

For similar question on area.

https://brainly.com/question/25292087  

#SPJ8

williams has 32 coins that are all either quarter or dimes the coins have a value of $5 how many dimes does williams have

Answers

Answer:

20 dimes

Step-by-step explanation:

1 dime = $0.1

1 quarter = $0.25

Let there be x dimes

Then the number of quarters is 32-x

Also, $5 = 0.1x + 0.25(32-x)

⇒ 5 = 0.1x + 8 - 0.25x

⇒ 0.25x - 0.1x = 8 - 5

⇒ 0.15x = 3

⇒ x = 3/0.15

⇒ x = 20

Which expression is equivalent to 3(x+4)

Answers

If theres answer options, that would be useful. But an an example of an expression equivalent to 3(x+4) could be 3x+12 if we used distributive property.

The answer is:

3x + 12

Work/explanation:

To simplify this expression, we will use the distributive property:

[tex]\sf{3(x+4)}[/tex]

Distribute the 3:

[tex]\sf{3\cdot x + 3 \cdot 4}[/tex]

[tex]\sf{3x+12}[/tex]

Therefore, the answer is 3x + 12.

1. Brandon went to a Formula One car race and used his stopwatch to time how fast his favorite driver, Fernando Alonso, went around the 4.7-kilometer track. Brandon started the timer at the beginning of the second lap, when the cars were already going fast. When he stopped the timer at the beginning of the third lap, one minute and three seconds had passed.

b. If you graphed the distance Fernando had traveled at the beginning of the lap and at the end of the lap, what would the coordinates of these points be? What would the

- and

-axes on this graph represent?

c. Find the equation of the line between these two points. What does this line represent?

d. If Fernando continues to average this speed, about how long do you think it would take him to finish the entire race? The race is 500 km.

Answers

Step-by-step explanation:

b. To determine the coordinates of the points on the graph, we need to consider the information given.

At the beginning of the second lap, one minute and three seconds had passed. Since each lap is 4.7 kilometers long, we can calculate the distance traveled at the beginning of the lap using the formula:

Distance = (Number of laps - 1) × Length of each lap

For the beginning of the second lap:

Distance = (2 - 1) × 4.7 km = 4.7 km

At the beginning of the third lap, one minute and three seconds had passed. Therefore, the distance traveled at the beginning of the third lap is:

Distance = (3 - 1) × 4.7 km = 9.4 km

The coordinates of the points on the graph would be:

Point A: (4.7 km, 4.7 km)

Point B: (9.4 km, 9.4 km)

On the graph, the x-axis would represent the distance traveled at the beginning of the lap, and the y-axis would represent the distance traveled at the end of the lap.

c. To find the equation of the line between the two points, we can use the slope-intercept form of a linear equation:

y = mx + b

where m is the slope and b is the y-intercept.

Using the coordinates of the two points (4.7 km, 4.7 km) and (9.4 km, 9.4 km), we can calculate the slope:

m = (y2 - y1) / (x2 - x1)

= (9.4 km - 4.7 km) / (9.4 km - 4.7 km)

= 4.7 km / 4.7 km

= 1

The slope of the line is 1.

Since the line passes through the origin (0, 0), the y-intercept (b) is 0.

Therefore, the equation of the line is:

y = 1x + 0

y = x

This line represents a one-to-one relationship between the distance traveled at the beginning of the lap and the distance traveled at the end of the lap.

d. To estimate how long it would take Fernando to finish the entire race if he continues to average the same speed, we need to find the time it takes for one lap.

In the given scenario, Brandon timed Fernando's lap for one minute and three seconds. Since there are 3 laps in total, we can divide the total time by the number of laps to find the average time per lap:

Average time per lap = Total time / Number of laps

= 1 minute and 3 seconds / 3

= 21 seconds

Since each lap is 4.7 kilometers long, we can calculate the speed:

Speed = Distance / Time

= 4.7 km / (1 minute + 21 seconds)

To estimate the time it would take Fernando to finish the entire race, we divide the total race distance by the speed:

Total race time = Total race distance / Speed

= 500 km / (4.7 km / (1 minute + 21 seconds))

To calculate the time, we need to convert 1 minute and 21 seconds to a decimal form:

1 minute + 21 seconds = 1 minute + (21 seconds / 60 seconds)

= 1 minute + 0.35 minutes

= 1.35 minutes

Substituting the values:

Total race time = 500 km / (4.7 km / 1.35 minutes)

= 500 km × (

1.35 minutes / 4.7 km)

= 500 km × 0.28723...

≈ 143.615 minutes

Therefore, it would take approximately 143.615 minutes for Fernando to finish the entire race if he continues to average the same speed.

A ship X sailing with a velocity (21 kmh 052⁰) observes a light fron a lighthuse due North. The bearing of the liglhthouse from the ship 20 minutes later is found to be 312. calcuate correct to thre sigificant figures

i) the orignal distance when the lighthoues is due West of the ship from the time when it is due North of the ship.

ii) the time in minutes, when the lighthouse is due West of the ship from the time when it is due North of the ship.

iii) the distance in km of the ship from the lighthoue when the light.hose is due West of the ship​

Answers

i) the original distance when the lighthouse is due West of the ship is 7 km

ii) The time in minutes when the lighthouse is due West of the ship is 21 minutes

iii) The distance in km of the ship from the lighthouse when the lighthouse is due West of the ship is 29.97 km

To solve this problem, we'll use the concepts of relative velocity and trigonometry. Let's break down the problem into three parts:

i) Finding the original distance when the lighthouse is due West of the ship:

The ship's velocity is given as 21 km/h at a bearing of 052°. Since the ship observed the lighthouse due North, we know that the angle between the ship's initial heading and the lighthouse is 90°.

To find the distance, we'll consider the ship's velocity in the North direction only. Using trigonometry, we can determine the distance as follows:

Distance = Velocity * Time = 21 km/h * (20 min / 60 min/h) = 7 km (to three significant figures).

ii) Finding the time in minutes when the lighthouse is due West of the ship:

To find the time, we need to consider the change in angle from 052° to 312°. The difference is 260° (312° - 052°), but we need to convert it to radians for calculations. 260° is equal to 260 * π / 180 radians. The ship's velocity in the West direction can be calculated as:

Velocity in West direction = Velocity * cos(angle) = 21 km/h * cos(260 * π / 180) ≈ -19.98 km/h (negative because it's in the opposite direction).

To find the time, we can use the formula:

Time = Distance / Velocity = 7 km / (19.98 km/h) = 0.35 h = 0.35 * 60 min = 21 minutes (to three significant figures).

iii) Finding the distance in km of the ship from the lighthouse when the lighthouse is due West of the ship:

We can use the formula for relative velocity to find the distance:

Relative Velocity = sqrt((Velocity in North direction)² + (Velocity in West direction)²)

Using the values we calculated earlier, we have:

Relative Velocity = sqrt((21 km/h)² + (-19.98 km/h)²) ≈ 29.97 km/h (to three significant figures).

Therefore, the ship is approximately 29.97 km away from the lighthouse when the lighthouse is due West of the ship.

For more question on distance visit:

https://brainly.com/question/30395212

#SPJ8

Please awnser asap I will brainlist

Answers

The solution to the system is (a) (4/5, 5, -4, -4)

How to determine the solution to the system

From the question, we have the following parameters that can be used in our computation:

The augmented matrix

Where, we have

[tex]\left[\begin{array}{cccc|c}1&0&0&0&4/5\\0&1&0&0&5\\0&0&1&0&-4\\0&0&0&1&-4\end{array}\right][/tex]

From the above, we have the diagonals to be 1

And other elements to be 0

This means that the equation has been solved

So, we have

a = 4/5, b = 5, c = -4 and d =-4

Read more about matrix at

brainly.com/question/11989522

#SPJ1

Let theta be an angle in quadrant two such that cos theta=-3/4. find the exact values of csc theta and cot theta

Answers

The exact values of csc(theta) and cot(theta) are: csc(theta) = 4√7/7

cot(theta) = -3√7/7.

To find the exact values of csc(theta) and cot(theta), given that cos(theta) = -3/4 and theta is an angle in quadrant two, we can use the trigonometric identities and the Pythagorean identity.

We know that cos(theta) = adjacent/hypotenuse, and in quadrant two, the adjacent side is negative. Let's assume the adjacent side is -3 and the hypotenuse is 4. Using the Pythagorean identity, we can find the opposite side:

[tex]opposite^2 = hypotenuse^2 - adjacent^2opposite^2 = 4^2 - (-3)^2opposite^2 = 16 - 9opposite^2 = 7[/tex]

opposite = √7

Now we have the values for the adjacent side, opposite side, and hypotenuse. We can use these values to find the values of the other trigonometric functions:

csc(theta) = hypotenuse/opposite

csc(theta) = 4/√7

To rationalize the denominator, we multiply the numerator and denominator by √7:

csc(theta) = (4/√7) * (√7/√7)

csc(theta) = 4√7/7

cot(theta) = adjacent/opposite

cot(theta) = -3/√7

To rationalize the denominator, we multiply the numerator and denominator by √7:

cot(theta) = (-3/√7) * (√7/√7)

cot(theta) = -3√7/7

Therefore, the exact values of csc(theta) and cot(theta) are:

csc(theta) = 4√7/7

cot(theta) = -3√7/7

for more such question on theta visit

https://brainly.com/question/29600442

#SPJ8

The new corporate logo created by the design engineers at Magic Motors is shown in the accompanying diagram. If the measure of arc AC = 80°, what is the mLB?

Answers

The measure of angle LB is 40°.

To find the measure of angle LB, we can use the fact that the measure of an inscribed angle is half the measure of its intercepted arc.

In this case, we are given that the measure of arc AC is 80°, so we can conclude that the measure of angle LB is half of that.

Since angle LB is an inscribed angle that intercepts arc AC, we can write the equation:

mLB = 1/2 [tex]\times[/tex] mAC

Substituting the given value, we have:

mLB = 1/2 [tex]\times[/tex] 80°

mLB = 40°

Therefore, the measure of angle LB is 40°.

In the context of the corporate logo, angle LB represents a portion of the circular shape of the logo.

By knowing the measure of arc AC, we can determine the measure of angle LB, which helps in accurately representing the logo in terms of angles and proportions.

This information is crucial for design and branding purposes, as it ensures consistency and precision in the presentation of the logo across various media and materials.

Overall, understanding the measures of angles and arcs in the logo design allows for effective communication and replication of the logo's visual elements, ensuring brand recognition and consistency in its representation.

For similar question on angle.

https://brainly.com/question/1309590  

#SPJ8

The following pie chart shows the number of rabbits, sheep, cattle, pigs on a farm
sheep
700
cattle
300
Pig
500
a. How many animals are on the farm? b.What represents the number of sheep on the farm
c. what percentage of the total number of animals are rabbits
d. Calculate the angle that represents number of pigs​

Answers

A) 1500 animals
B) 700/1500 sheep
C) I don’t see a number of rabbits or pie chart so I can’t tell
D) 1/3 animals are pigs

Find the measure of the indicated arc:
55°
110°
O 250°
220°
?
Q
110 °
R
S

Answers

Answer:

? = 220°

Step-by-step explanation:

the measure of the inscribed angle QRS is half the measure of its intercepted arc QS , then

QS = ? = 2 × QRS = 2 × 110° = 220°

In ΔBCD,
B
D

BD
is extended through point D to point E,
m

C
D
E
=
(
9
x

12
)

m∠CDE=(9x−12)

,
m

B
C
D
=
(
2
x
+
3
)

m∠BCD=(2x+3)

, and
m

D
B
C
=
(
3
x
+
5
)

m∠DBC=(3x+5)

. Find
m

B
C
D
.
m∠BCD.

Answers

m∠BCD = 31.57° (approx). Hence, the answer of the angle is 31.57 degrees.

In the given diagram, BD is extended through point D to point E, m∠CDE = (9x - 12)°, m∠BCD = (2x + 3)°, and m∠DBC = (3x + 5)°. We need to find m∠BCD.

Use the Angle Sum Property of a Triangle.The Angle Sum Property of a Triangle states that the sum of all the angles in a triangle is equal to 180°.The angle sum of ΔBCD is:m∠BCD + m∠DBC + m∠CDE = 180°Substituting the given angles, we get:(2x + 3)° + (3x + 5)° + (9x - 12)° = 180°Simplifying the above expression, we get:14x - 4 = 180°14x = 180° + 4x = 184/14x = 92/7Find m∠BCD

       We know that m∠BCD = (2x + 3)°

       Substituting x = 92/7, we get:

       m∠BCD = (2 × 92/7 + 3)° = (184/7 + 3)° = 221/7°

       Therefore, m∠BCD = 31.57° (approx). Hence, the answer is 31.57.

For more such questions on angle, click on:

https://brainly.com/question/25770607

#SPJ8

Roger can run one mile in 9 minutes. Jeff can run one mile in 6 minutes. If Jeff gives Roger a 1 minute head start, how
long will it take before Jeff catches up to Roger? How far will each have run?
They each will have run of a mile.

Answers

Both Roger and Jeff will have run a distance of 1/3 mile when Jeff catches up to Roger after 2 minutes.

To solve this problem, we can determine the relative speeds of Roger and Jeff.

Since Roger runs one mile in 9 minutes, his speed is 1/9 miles per minute.

Similarly, Jeff runs one mile in 6 minutes, so his speed is 1/6 miles per minutes.

Let's assume that Jeff catches up to Roger after t minutes.

In that time, Roger would have run (1/9) [tex]\times[/tex] t miles, and Jeff would have run (1/6) [tex]\times[/tex] t miles.

Since Jeff gives Roger a 1-minute head start, we can express their distances covered as:

Distance covered by Roger = (1/9) [tex]\times[/tex] (t+1) miles

Distance covered by Jeff = (1/6) [tex]\times[/tex] t miles

For Jeff to catch up to Roger, their distances covered must be equal. So we can set up the equation:

(1/9) [tex]\times[/tex] (t+1) = (1/6) [tex]\times[/tex] t

To solve for t, we can cross-multiply and simplify:

6(t+1) = 9t

6t + 6 = 9t

6 = 9t - 6t

6 = 3t

t = 2

Therefore, it will take 2 minutes for Jeff to catch up to Roger.

Substituting t = 2 back into the equations, we can find the distances covered by each:

Distance covered by Roger = (1/9) [tex]\times[/tex] (2+1) = 1/3 mile

Distance covered by Jeff = (1/6) [tex]\times[/tex] 2 = 1/3 mile

For similar question on distance.

https://brainly.com/question/28529268  

#SPJ8

Please answer ASAP I will brainlist

Answers

Answer:

Step-by-step explanation:

The given augmented matrix is already in reduced row echelon form. We can interpret it as a system of equations as follows:

1x + 0y + 0z + (4/5)w = 0

0x + 1y + 0z + 5w = 0

0x + 0y + 1z - 4w = 0

0x + 0y + 0z + w = -4

From the last row, we can see that w = -4. Substituting this value back into the previous rows, we get:

1x + 0y + 0z + (4/5)(-4) = 0

0x + 1y + 0z + 5(-4) = 0

0x + 0y + 1z - 4(-4) = 0

Simplifying these equations, we have:

x - (16/5) = 0

y - 20 = 0

z + 16 = 0

From the second equation, y = 20. From the third equation, z = -16. Substituting these values into the first equation, we get x - (16/5) = 0, which implies x = 16/5.

Therefore, the solution of the system is (16/5, 20, -16, -4).

So, the correct choice is:

A. The system has exactly one solution. The solution is

(16/5, 20, -16, -4)

Pamela bought a cat carrier to take her new kitten, Muffinnette, to the vet. The carrier is shaped like a rectangular prism that is 15 inches long, 9 1/2
inches wide, and 10 inches tall.
Which equation can you use to find the volume of the cat carrier, V?
What is the volume of the cat carrier?

Answers

To find the volume of a rectangular prism, we multiply its length, width, and height. In this case, the length of the cat carrier is 15 inches, the width is 9 1/2 inches, and the height is 10 inches.

The equation to find the volume, V, is:
V = length × width × height

Substituting the given values into the equation:
V = 15 inches × 9 1/2 inches × 10 inches

To simplify the calculation, we can convert the mixed fraction to an improper fraction:
V = 15 inches × (19/2) inches × 10 inches

Now, multiply the numbers:
V = (15 × 19 × 10) / 2 cubic inches

Calculating:
V = 2850 / 2 cubic inches
V = 1425 cubic inches

Therefore, the volume of the cat carrier is 1425 cubic inches.


What are the values of x and y?
A) x = 18√3; y = 9√3
B) x = 9; y = 9√3
C) x = 9√3; y = 9
D) x = 9√2; y = 9

Answers

The values of x and y are 9√3 and 9. Thus, option C is the answer.

From the figure, we know that angle A = 60°, angle C = 30° and side AC =18 units.

We have to use trigonometric ratios to find the values of x and y.

sin30° = Opposite side/Hypotenuse  

But, we also know that sin30° = 1/2

Substituting the value in the above equation, we get

1/2 = y/18

Thus, the value of y = 18/2 = 9.

Now, sin60° = Opposite Side/ Hypotenuse

sin60° = √3/2

Substituting the value, we get

√3/2 = x/18

Thus, x = 9√3.

Therefore, the values of x and y in the given triangle are 9√3 and 9.

Read more about Trigonometry ratios here:

https://brainly.com/question/13276558

Other Questions
Main Requirement: Create a music player with an LED matrix. As input the system will have a standard 3.5mm audio input. As output, the system will have 2 speakers in stereo format and an LED matrix of VU meter type audio volume indication.Other Requirements:- The device must have a volume control for the stereo speakers, it can be a control for each channel or preferably a single control for both. In addition, light-emitting diodes (LEDs) should be used in the structure as a visual element of the volume and tones of musical pieces (light scale). This type of representation is known as a VU meter. - A 6x10 matrix should be created where half is controlled by the left audio signal and the other half by the right signal. The volume control will be realized by analog integrated and discrete circuits, to implement the knowledge acquired during the course, specifically it seeks to use operational amplifiers and audio amplifiers. Amplification control is the heart of the project, and it must be designed in such a way that it does notthe audio output is distorted.- The circuit shall be operated from AC mains power from the home network, with no connections to DC sources. You must implement an AC to DC converter circuit that provides the necessary voltages and currents for the different integrated and discrete circuits to use. It is suggested to investigate power supply circuits with the circuits integrated 7812 and 7912.To Do:Please assemble the above by using some simulation software, such as: Multisim, LTspice, Tinkercad (preferred), Proteus; or another that allows to see the assembly of the entire component system with their assigned values If the embedded length of a Gr-60 rebar is only half of its development length, the rebar will only be expected to develop psi in strength. (Enter a number) how to write out "its 1:00" in spanish A distance A{B} is observed repestedly using the same equipment and procedures, and the results, in meters, are listed below: 67.401,67.400,67.402,67.406,67.401,67.401,67.405 , and If our perception can change due to traumatic situations.... how do first respon- ders focus during these same traumatic situations? This is for anyone to ex- pand on. A single stationary railway car is bumped by a fivecar train moving at 9.3 km/h. The six cars moveoff together after the collision. Assuming that the masses of all the railway cars are the same, then thespeed of the new sixcar train immediately after impact is A beam of light travels from air into an unknown liquid. The incident light ray strikes the air-liquid boundary at an angle of 35.3 degrees from the normal and the ray refracts into the liquid at an angle of 21.2 degrees from the normal. a) What is the index of refraction of the unknown liquid? b) If the ray of light started under the surface of the liquid and was directed towards the surface (towards the air-liquid boundary), what would be the critical angle for total internal reflection? 1. Identify the financial health of Amazon. Look at differentfinancial ratios2. How can you help forecast for Amazon? A chemical reactor process has the following transfer function, G (s) = (3s +1)(4s +1) Internal Model Control (IMC) scheme is to be applied to achieve set-point tracking and disturbance rejection. a) Draw a block diagram to show the configuration of the IMC control system, The b) Factorize G (s) into G (s) = Gm+ (S) Gm-(s) such that G+ (s) include terms that m m cannot be inversed and its steady state gain is 1. c) Determine the filter transfer function needed for design the IMC controller. Choose filter time constant as 1 sec. d) Design the IMC controller. Comment if the IMC controller can be implemented by a PID controller 5. Who argued that deceptive practices in advertising are"legitimate and socially desirable practices"?A) Theodore LevittB) John Maynard KeynesC) Adam SmithD) Milton FriedmanE) R. Edward Fre 50- In terms of soybean production, as stated in the lecture, which statement is false?Group of answer choicesThere is a high export demand for soybeansSoybean production works well in the large, level fields of the regionSoybeans thrive because there are few climate demandsSoybean production went from nearly 0 in 1949 to over 25 million hectares in 2000A two-year corn-soybean rotation works best for maximum productivity5- According to Hudson (Chapter 14), which of the following statements is NOT true?Group of answer choicesThe US automobile industries suffered from reduced demand around the same time that the steel industry suffered from similar problemsOne of Henry Fords innovations was the branch automobile assembly plantThe first automobiles were manufactured in EuropeHenry Ford invented the internal combustion engineAs the Detroit automakers grew, they outright bought the smaller companies which made specialized parts for them11- According to Hudson, much of the summer vegetable crop in the United States; such as peas, sweet corn, and snap beans, is produced on which soil type?Group of answer choicesOxisolsHistosolsAndisolsAlfisolsMollisols A three-phase, 60 Hz, six-pole, Y-connected, 480-V induction motor has the following parameters: R = 0.202, R2 = 0.102, Xeq = 50 The load of the motor is a drilling machine. At 1150 rpm, the load torque is 150Nm. The motor is driven b a constant v/f technique. When the frequency of the supply voltage is reduced to 50 Hz, calculate the following: a. Motor speed b. Maximum torque at 60 Hz and 50 Hz c. Motor current at 50 Hz Hint: For a drilling-machine load (an inverse-speed-characteristics load) T/T = n/n = (1-S)/(1-S) Compare and contra 5. Explain the technologies behind e-commerce (10 marks) ome unable in e-commerce (10 marks) Only an experiment can show:OA. how people act in a natural environment.OB. how children develop over time.C. how one thing causes another.OD. what a large number of people believe.SUBMIT How was the Florida International University bridge structurallysupported? When we mention projects, we consider usually they are developed through progressive elaboration, which means ? "The Universe is not obliged to conform to what weconsider comfortable or plausible." --Carl SaganWhat does this quote mean?Please explain with a 350 word count. Fear of public speaking and delivering a presentation is a common form of anxiety. Chemical engineers have to deliver presentation during various phases of their professional career. Many engineers with this fear avoid public speaking situations but with preparation and persistence engineers can overcome their fear. Consider you have to deliver a presentation on the topic of Role of Chemical Engineers for the betterment of Society. List at least 6 actions that help in reducing anxiety before and during a verbal presentation. Explain (briefly) each action you list. Write the answers in your own words. [6 marks for listing actions, for explaining each action] A parallel plate capacitor with circular faces of diameter 3.8 cm separated with an air gap of 3.8 mm is charged with a 12,0 V emf. What is the capacitance of this device, in pF, between the plates? Do not enter units with answer Describe the two changes to IPv6 header that improvethroughput.