what is the magnitude of the upward acceleration of the load of bricks? express your answer with the appropriate units.
Answers
The magnitude of the upward acceleration of a load of bricks is 2.77 m/s².
What is tension in the rope?Tension is the pulling force cаrried by flexible mediums like ropes, cаbles аnd string. Tension in а body due to the weight of the hаnging body is the net force аcting on the body.
The tension in the string when the body cаn be given аs,
T = m(a +g)
Here, (m) is the mаss of the body, (а) is the аccelerаtion аnd (g) is the аccelerаtion due to grаvity.
The mаss of the bricks is 15.2 kg.The mаss of the counterweight is 27.2 kg аnd the system is releаsed from the rest.The tension due to the bricks with mаss of 15.2 kg is,
T = 15.2(a + 9.80)
The tension due to the bricks with mass of 27.2 kg is,
T = 27.2(9.80 - a)
Equate both the equation as,
15.2(a + 9.80) = 27.2(9.80 - a)
15.2a + 148.96 = 266.56 - 27.2a
42.4a = 117.6
a = 2.77 m/s²
Thus, the magnitude of the upward acceleration of a load of bricks is 2.77 m/s².
Your question is incomplete, but most probably your full question can be seen in the Attachment.
For more information about tension refers to the link: https://brainly.com/question/11191036
#SPJ11
Related Questions
if all motion is relative what happens when two objects traveling at a combined speed over the speed of light collide
Answers
If all motion is relative what happens when two objects traveling at a combined speed over the speed of light collide, According to Einstein's theory of relativity, it is impossible for an object with mass to travel at the speed of light or beyond it. The reason for this is that the faster an object travels, the more massive it becomes.
Therefore, if two objects with mass are traveling at a combined speed greater than the speed of light, it would violate the laws of physics and be impossible for them to collide. What is relative motion? Relative motion is the motion of an object relative to a point of observation. In other words, it is the motion of an object relative to a reference frame or observer.
An object's motion may appear different to different observers, depending on their relative motion with respect to the object. For example, a train may appear to be moving slowly to someone standing beside the tracks, but it may appear to be moving quickly to someone sitting inside the train. Therefore, all motion is relative, depending on the observer's frame of reference.
To know more about motion refer here:
https://brainly.com/question/22810476#
#SPJ11
A 2 kg mass moving to the right makes an elastic head-on collision with a 4 kg mass moving to the left at 4 m/s. The 2 kg mass reverses direction after the collision and moves at 3 m/s. The 4 kg mass moves to the left at 1 m/s. What was the initial velocity of the 2 kg mass?
Answers
Answer: That's a good question
Explanation:
what happens to the water level in the tub if i open the faucet further and water enters at a higher rate?
Answers
If you open the faucet further and water enters the tub at a higher rate, the water level in the tub will: rise
The water level will increase at a faster pace, and the tub will fill up more quickly than before. This happens because the rate of water flow into the tub is now higher than the rate at which it can drain away. Therefore, opening the faucet further increases the flow of water into the tub, which raises the water level at a higher rate.
The faucet opening determines the water flow rate, and the flow rate affects the filling rate of the tub. Thus, a higher flow rate leads to a higher filling rate of the tub. As a result, the water level in the tub increases more quickly when the faucet is opened further. The pressure of the incoming water is a critical factor in determining the rate at which the water fills up the tub.
When you turn the faucet on all the way, it releases the highest possible amount of water pressure into the tub, causing the water level to rise rapidly. In summary, opening the faucet further and letting water enter the tub at a higher rate will increase the water level in the tub, and the tub will fill up more quickly than before.
To know more about water level refer here:
https://brainly.com/question/17750427#
#SPJ11
the graph starting from the instant it is released. how could a student use the graph to determine the total energy of the block-earth system?
Answers
A student can use the graph to determine the total energy of the block-earth system by finding the total area under the curve of the graph. This is because the area under the curve represents the work done on the block-earth system and work is a measure of energy.
What is a Graph?The graph can be a position-time curve, velocity-time curve or acceleration-time curve. The student can calculate the total energy of the block-earth system using the work-energy principle which states that the net work done on an object is equal to the change in its kinetic energy. This is given by the equation
W = ΔK
Where W is the net work done, and ΔK is the change in kinetic energy.
If the potential energy of the block is considered, then the equation will be
W = ΔK + ΔPU
where ΔPU is the change in potential energy.
The total energy of the block-earth system will be the sum of its kinetic energy and potential energy at any point in time.
To know more about kinetic energy:
https://brainly.com/question/22174271
#SPJ11
a girl weighing 455 n jumps from a tree, and her center of mass falls a vertical distance of 1.50 m. find the impulse necessary to bring her to rest.
Answers
The impulse necessary to bring her to rest is zero (0 Ns). Taking into account that the girl's momentum was maintained even as she fell, and since she started from rest, her final momentum should also be zero. So no additional push is needed beyond what gravity provides.
To find the impulse necessary to bring the girl to rest, we need to use the principle of conservation of momentum, which states that the total momentum of a system is conserved in the absence of external forces. In this case, we can assume that the girl is initially at rest, so her initial momentum is zero.
When the girl jumps from the tree, she is subject to the force of gravity, which causes her to accelerate downwards. We can use the equation for the gravitational potential energy to find the work done by gravity:
[tex]W = mgh[/tex]
Where W is the work done by gravity, m is the mass of the girl, g is the acceleration due to gravity, and h is the vertical distance that the center of mass falls.
Plugging in the given values, we get:
[tex]W = (455 N)(1,50 m)(9,81 m/s^2) \\W= 6.717,08 J[/tex]
This work done by gravity is equal to the change in kinetic energy of the girl, which can be expressed as the impulse required to bring her to rest:
J = ΔK
[tex]J= -mv[/tex]
where J is the impulse, ΔK is the change in kinetic energy, m is the mass of the girl, and v is her final velocity. Since the girl comes to a stop, her final velocity is zero, so we can simplify the equation to:
[tex]J = mv[/tex]
Plugging in the given mass and solving for the impulse, we get:
[tex]J = (455 N)(-0 m/s) \\J = 0 Ns[/tex]
Therefore, the impulse necessary to bring the girl to rest is zero.
Learn more about the impulse at: https://brainly.in/question/1383595
#SPJ11
a space traveler weighs 682 n on earth. what will the traveler weigh on another planet whose radius is 3 times that of earth and whose mass is 2 times that of earth?
Answers
The traveler's weight on another planet whose radius is 3 times that of Earth and whose mass is 2 times that of Earth is 21.647 N
The following is the solution to the given problem:
Mass and gravity are related to one another. Gravity is generated by the planet's mass, and the magnitude of the gravitational force is determined by the mass of the planet on which the object is situated, as well as the mass of the object.
Mass, distance, and gravity are all factors that influence the gravitational force. Mass is directly proportional to the gravitational force and inversely proportional to the square of the distance from the gravitational force's center.
Here is the formula: Force of gravity = G(M1M2)/d²where, G is the gravitational constant 6.67 x 10^{-11} N(m/kg)^2, M1 is the mass of the first body, M2 is the mass of the second body, d is the distance between the centers of two bodies.
On earth, the traveler weighs 682 N. On another planet whose radius is 3 times that of Earth and whose mass is 2 times that of Earth, we have to calculate the traveler's weight.
Mass of Earth is 5.972 × 10^24 kg2,
Radius of Earth is 6.371 x 10^63.
The mass of the planet whose radius is 3 times that of Earth and whose mass is 2 times that of Earth.
Mass of the planet = 2 x mass of Earth = 2 x 5.972 × 10^24 kg = 1.1944 × 10^25 kg4.
The radius of the planet whose radius is 3 times that of Earth,
Radius of the planet = 3 x radius of Earth = 3 x 6.371 x 10^6 m = 1.9113 × 10^7 m5.
The distance between the two planets.
Distance between two planets = radius of planet + radius of Earth
= 1.9113 × 10^7 m + 6.371 x 10^6 m
= 2.54813 x 10^7 m
= 2.54813 x 10^10 cm.
Putting all the values in the formula.
Force of gravity = G (M1 M2) / d²
Where, Mass of the traveler on the other planet is m.
Mass of the Earth is M1 = 5.972 × 10^24 kg.
Mass of the other planet is M2 = 2 x 5.972 × 10^24 kg = 1.1944 × 10^25 kg.
Radius of the Earth is r1 = 6.371 x 10^6 m.
Radius of the other planet is r2 = 3 x 6.371 x 10^6 m = 1.9113 × 10^7 m.
Distance between the two planets is d = 2.54813 x 10^10 cm.682
= G (M1 M2)/d²
G = 6.674 × 10^-11 N m² / kg²
Force of gravity on other planet = G(mM2)/r² where m is the mass of the traveler on the other planet
= 6.674 × 10^-11 × (m × 1.1944 × 10^25)/(1.9113 × 10^7)²
Weight on another planet = force of gravity on another planet × mass of the traveler on another planet
= (6.674 × 10^-11 × (m × 1.1944 × 10^25)/(1.9113 × 10^7)²) × m
= 21.647 N (approximately)
Therefore, the traveler's weight on another planet whose radius is 3 times that of Earth and whose mass is 2 times that of Earth is 21.647 N (approximately).
To know more about Earth, refer here:
https://brainly.com/question/29054751#
#SPJ4
what observation can you make that allows you to determine the relative magnitudes of the forces on the upper book?
Answers
Observing the reaction of the book when placed on the table, we can determine the relative magnitudes of the forces on the upper book. If the book stays in place, then the magnitude of the normal force is equal to the gravitational force. If the book slides down, then the gravitational force is greater than the normal force, and if the book slides up, then the normal force is greater than the gravitational force.
To determine the relative magnitudes of the forces on the upper book, we can observe the reaction of the book when placed on the table. If the book stays in place and does not move, then the forces on the upper book are in balance, meaning that the magnitude of the normal force is equal to the gravitational force.
To explain further, the normal force is the force that the table exerts on the book. It opposes the force of gravity, which is the force of attraction between the book and the Earth. When the normal force is equal to the gravitational force, the book is in equilibrium, meaning that it stays in place. When the gravitational force is greater than the normal force, the book slides down, and when the normal force is greater than the gravitational force, the book slides up.
for such more question on magnitudes
https://brainly.com/question/24468862
#SPJ11
at what speed is a bicyclist traveling when his 27 inch diameter tires are rotating at an angular speed of 5p radians per second?
Answers
The bicyclist is travelling at 0.0034 miles/hour
Thus, According to the given question, His bicycle's tire is 27 inches in diameter
∴ radius = 27/2 inches. His angular speed is 5π rad/sec.
1 complete rotation is 2π rad
∴ 5π rad/sec = 5π/2π = 2.5 complete rotations/sec
∴ It will be 2.5 times 60 complete rotations per minute. = 150 rpm.
Circumference of a circle is 2πr
= 2π(27/2) inches
= 84.82 inches which is equivalent to 0.00135 miles per rotation. The tire rotates at 150 rpm
∴The distance it will cover in miles per hour is = (0.00135×150)/60 miles/hour = 0.0034 miles/hour.
Thus, The bicyclist is travelling at 0.0034 miles/hour.
Learn more about Distance, refer to the link:
https://brainly.com/question/13034462
#SPJ12
if it rotates through 8.00 revolutions in the first 2.50 s , how many more revolutions will it rotate through in the next 5.00 s ?
Answers
The object will rotate through 16.00 revolutions in the next 5.00s if it rotates through 8.00 revolutions in the first 2.50s.
The first step to answer this question is to determine the rotational speed (angular velocity) of the object. To do this, we use the formula:
Angular velocity = number of revolutions / time
So, the angular velocity of the object is given by:
Angular velocity = 8.00 revolutions / 2.50 s
Angular velocity = 3.20 revolutions per second
Now, we can use this angular velocity to determine the number of revolutions the object will rotate through in the next 5.00 s. To do this, we use the formula:Number of revolutions = angular velocity x time
So, the number of revolutions the object will rotate through in the next 5.00 s is given by:
Number of revolutions = 3.20 revolutions per second x 5.00 s
Number of revolutions = 16.00 revolutions
Therefore, the object will rotate through 16.00 revolutions in the next 5.00 s.
More on angular velocity: https://brainly.com/question/20355237
#SPJ11
the space station rotates in order to simulate earth's gravity - so that the normal force on an astronaut at the outer edge would be the astronaut's weight on earth. what is the period of the rotation, t (time for one complete revolution) needed to achieve this?
Answers
The space station rotates in order to simulate earth's gravity so that the normal force on an astronaut at the outer edge would be the astronaut's weight on earth. The period of rotation needed to achieve this is: 29.27 minutes
The Space Station is a microgravity environment that is constantly in freefall around the Earth, but it is not affected by gravity. As a result, the astronauts in the Space Station float and move around in the Station. However, by rotating the Space Station, a simulated gravity effect can be created that is comparable to gravity on Earth.
This is due to the centrifugal force that is generated as a result of the rotation. The period of rotation required to generate the required centrifugal force can be calculated.
The centrifugal force generated by the rotation of the Space Station is equal to the force of gravity acting on the astronauts on Earth. Therefore, the formula used to calculate the period of rotation is given:
T = 2π √(R/g)
Where T is the period of rotation, R is the radius of the Space Station, and g is the acceleration due to gravity on Earth. The value of g is 9.8m/s², and the radius of the Space Station is approximately 420 kilometers.
T = 2π √(420,000 / 9.8)
T = 1,756.22 seconds
The period of rotation of the Space Station required to generate a centrifugal force equivalent to the force of gravity on Earth is approximately 1,756.22 seconds or approximately 29.27 minutes.
To know more about gravity refer here:
https://brainly.com/question/14874038#
#SPJ11
which of the following is an advantage of digital imaging? increased patient radiation exposure, increased chemical usage, increased speed for viewing images
Answers
One of the advantages of digital imaging is increased speed for viewing images.
Digital imaging is a technology that enables doctors to take X-rays, MRIs, CT scans, and other medical images, and store them digitally.
Digital imaging provides many advantages over traditional film-based imaging, such as increased speed for viewing images.
Digital imaging is a medical technology that allows physicians to take, store, and view medical images in digital form. Digital imaging includes modalities such as X-rays, computed tomography (CT), magnetic resonance imaging (MRI), and ultrasound.
Digital imaging provides several benefits, such as increased speed, improved diagnostic accuracy, lower radiation exposure, and reduced chemical usage. It also enables doctors to view images in real-time, making it easier to detect and diagnose medical conditions.
Additionally, digital images can be easily shared between medical professionals, allowing for better communication and collaboration.
The advantages of digital imaging include increased speed for viewing images. Instead of waiting for film-based images to be developed, doctors can view digital images instantly. This can be particularly important in emergency situations, where time is critical.
Digital imaging also allows doctors to manipulate images, zooming in or out as needed, to get a clearer view of the affected area or to identify specific features or abnormalities.
To know more about digital imaging, refer here:
https://brainly.com/question/321434#
#SPJ4
how do the light-collecting area and best possible angular resolution of telescope with a 10-meter diameter mirror compare to that of a telescope with a 5-meter diameter mirror?
Answers
Angular resolution and light-collecting area:
The light-collecting area of a telescope is the amount of light that the mirror can collect. It is critical in astronomy because the brighter the star or galaxy you are looking at, the more information you can gather.
The angular resolution, on the other hand, is a measurement of the minimum angle between two stars that can be distinguished using a telescope. A high angular resolution means that you can see objects more clearly.
A telescope with a 10-meter diameter mirror has a four times larger light-collecting area and twice the best possible angular resolution compared to a telescope with a 5-meter diameter mirror. Therefore, a larger telescope will provide better images of objects in space because it gathers more light and can see more clearly.
The light-collecting area and best possible angular resolution of the telescope depending on the size of the mirror or lens used. This is why larger telescopes are better suited for astronomical observation than smaller ones.
Learn more about mirror at:
brainly.com/question/30861998
#SPJ11
you have learned that in the earth-moon system, the gravitational pull of earth's tidal bulges causes the moon to spiral away from earth. since triton has a retrograde orbit, how does this affects the neptune-triton system?
Answers
You have learned that in the earth-moon system, the gravitational pull of earth's tidal bulges causes the moon to spiral away from earth. since triton has a retrograde orbit, this affects the neptune-triton system to be unstable, making it difficult for the other moons to maintain stable orbits.
Triton is a large moon of Neptune, about 1,680 miles (2,700 kilometers) in diameter. Its orbit is tilted and is also in the opposite direction of the other moons in the solar system's plane. Triton's orbit is retrograde, which means it is moving in the opposite direction to Neptune's rotation. When an object orbits in the opposite direction to the rotation of the planet it orbits, it is said to have a retrograde orbit. This is because the gravitational attraction between the two objects is weaker when they are moving in opposite directions. Because of this, Triton's retrograde orbit has a destabilizing effect on Neptune's other satellites.
The retrograde orbit of Triton causes the Neptune-Triton system to be unstable, making it difficult for the other moons to maintain stable orbits. The gravitational force of Triton is pulling away at the other moons, causing them to move erratically, some being pushed further away from Neptune and others being pulled closer. In addition to the destabilizing effect, Triton's retrograde orbit has caused it to move closer to Neptune over time, where it is thought that it will eventually break apart, forming a ring around the planet.
Learn more about Neptune at:
https://brainly.com/question/30562318
#SPJ11
logs sometimes float vertically in a lake because one end has become water-logged and denser than the other. what is the average density of a uniform-diameter log that floats with 20.0% of its length above water?
Answers
Uneven-diameter logs that float with 20.0% of their length above water have an average density of 0.8g/cm3. The density is the proportion of weight to capacity.
An item it's far less compact that liquid may be supported up liquid water, and hence it floats. More dense objects can sink when submerged in water. Less dense logs float whereas more thick logs sink. A body can change its condition of rest or motion by the application of force
Instead of obliquely reading from either the side, read the scale stick straight from of the end of both the log. → The diameter of a log is only ever calculated within the bark. Employ a log measuring rod to determine the log's small end's "diameter from within bark," also known as "d.i.b."
To know more about force click here
brainly.com/question/29044739
#SPJ4
blue objects absorb most wavelengths but reflect light at about 450 nm. this phenomenon relates to .
Answers
The blue objects absorb most wavelengths but reflect light at about 450 nm. This phenomenon relates to the colors of objects.
When the sunlight falls on an object, some of the light is absorbed, and the rest of the light is reflected. Objects appear to be a certain color because they absorb some colors of light and reflect others. Some objects appear blue because they absorb all colors of light except blue.
Blue light has a shorter wavelength than other colors of light, so it is scattered more in the Earth's atmosphere. The sky appears blue because the shorter blue wavelengths are scattered in all directions and are more likely to reach the observer's eye.
The light that is reflected off blue objects is at a wavelength of around 450 nm. When white light passes through a prism, it splits into the colors of the spectrum.
Violet light has the shortest wavelength, and red light has the longest wavelength. Between violet and green, the colors blend to form blue. So, if blue objects reflect light at around 450 nm, that means they reflect blue light.
To learn more about wavelength:
https://brainly.com/question/31143857#
#SPJ11
a van exerts a force on trailers of different masses m. compared with the force exerted on each trailer, rank the magnitude of force each trailer exerts on the van. (or are all pairs of forces equal in magnitude?)
Answers
The trailer pulls on the vehicle with an average force of A=B=C.
Newton's second law of acceleration is expressed as follows: F = ma
In this case, the mass is m, and the acceleration is a.
Assume that g=9.8 m/s2 represents the acceleration caused by gravity.
The acceleration of the object will be zero if it is travelling at a constant speed.
Because of the constant velocity, the van's net force on the trailer is therefore zero.
As a result, the van applies the same amount of force to each trailer. Thus, FA FB = FC.
As a result, each trailer pulls on the van with the same amount of force in the opposite direction. FA' = FB' = Fc', therefore.
As a result, A=B=C represents the rank of the force the trailer exerts on the van.
To know about force
https://brainly.com/question/24115409
#SPJ4
trying to solve this please i need help asap
Answers
The force from student is positive, the force due to gravity is zero and the frictional force due to air is negative.
Given the distance of the bag from the room = 3m
From the diagram we can see that there are three different forces acting on the bag such as:
Fs : force from the student
FG: Force due to gravity
f: force of friction from air
Here we can say that according to the free-body diagram:
The force from from student(Fs) is acting upwards and is positive since the student is pushing the bag across the room, the force from the student (Fs) is doing positive work on the bag.
The force due to gravity(FG) is acting downwards and is zero since the bag is moving in a level room, the force of gravity (FG) is parallel to the motion of the bag and therefore isn't doing any work on the bag.
The work done by the frictional force of air (f) on the bag is negative since it is opposing the displacement of the bag.
To learn more about force click here https://brainly.com/question/13191643
#SPJ1
what magnitude force is required to give a helicopter of mass m an acceleration of 0.10g upward? express your answer in terms of the variable m and appropriate constants.
Answers
Magnitude of the force required to give the helicopter an acceleration of 0.10g upward is 0.981m N, where m is the mass of the helicopter in kilograms.
What is force?Physical quantity which causes or tends to cause a motion in any object at rest or changes or tends to change the direction of motion of a moving object or shape or size of object is called force.
Force required to give a helicopter of mass m an acceleration of 0.10g upward can be calculated using Newton's second law. Here, the acceleration is 0.10g, which can be expressed as:
a = 0.10g = 0.10 * 9.81 m/s² = 0.981 m/s²
F = ma
F = m * 0.981
Therefore, magnitude of the force required to give the helicopter an acceleration of 0.10g upward is 0.981m N, where m is the mass of the helicopter in kilograms.
To know more about force, refer
https://brainly.com/question/12970081
#SPJ1
6. object x of mass m travels toward object y of mass 2m in such a way that they collide. the table contains data about the velocities of object x and object y immediately before the collision and immediately after the collision. what are the change in momentum of the two-object system from immediately before the collision to immediately after the collision?
Answers
The change in momentum of the two-object system from immediately before the collision to immediately after the collision is m(v-V) + 2m(V-v).
The change in momentum of the two-object system from immediately before the collision to immediately after the collision can be determined using the following equation:
Change in Momentum = Final Momentum - Initial Momentum.
The initial momentum of object x is given by the formula: Mass x Velocity = mv, where m is the mass of object x and v is the velocity of object x immediately before the collision. The initial momentum of object y is given by 2mv, where 2m is the mass of object y and v is the velocity of object y immediately before the collision. The final momentum of object x is given by m(v-V) where m is the mass of object x, v is the velocity of object x immediately before the collision and V is the velocity of object x immediately after the collision. The final momentum of object y is given by 2m(V-v) where 2m is the mass of object y, V is the velocity of object y immediately after the collision and v is the velocity of object y immediately before the collision. The change in momentum = m(v-V) + 2m(V-v).Therefore, the change in momentum of the two-object system from immediately before the collision to immediately after the collision is given by m(v-V) + 2m(V-v).
To know more about change in momentum click here:
https://brainly.com/question/30157362
#SPJ11
a mass of 500g ball is kicked at angle of 45 degree to the horizontal the ball reaches 12m height what is the initial velocity
Answers
The initial velocity of a 500g ball kicked at a 45-degree angle to the horizontal and reaching a height of 12m can be calculated using the kinematic equation.
What is the kinematic equation?The equation of kinematics is a set of equations that are used to describe the motion of objects. They relate to displacement, velocity, acceleration, and time. Kinematic equations are divided into two categories, depending on the object's acceleration: zero acceleration and non-zero acceleration.
The kinematic equation for the object in motion with uniform acceleration is as follows:v^2 = u^2 + 2asWhere: v = final velocity u = initial velocity a = acceleration s = displacement. To calculate the initial velocity of the ball, we can rearrange the equation above to obtain:u^2 = v^2 - 2as From the given, a = -9.8 m/s² (negative acceleration indicates that the ball is decelerating or moving upward) s = 12m v = 0 (the final velocity is zero because the ball has stopped rising and is about to start falling). We'll use these values to calculate the initial velocity of the ball.u² = (0)² - 2(-9.8)(12)u² = 235.2u = sqrt(235.2)u = 15.33 m/s.
Therefore, the initial velocity of the ball is approximately 15.33 m/s.
Read more about velocity :
https://brainly.com/question/80295
#SPJ11
in august of 2006, the iau (international astronomical union) published an official definition what it means to be a planet. what criteria is needed for that classification? why is pluto no longer considered a full fledged planet?
Answers
In August of 2006, the International Astronomical Union (IAU) published an official definition of what it means to be a planet.
The criteria required for that classification are:
The object must be in orbit around the sun.The object must be spherical or nearly spherical.The object must have cleared the neighborhood around its orbit.Pluto is no longer considered a full-fledged planet because it has not satisfied the third condition mentioned above. According to the IAU, Pluto has not cleared the neighborhood around its orbit.
That is, Pluto shares its orbit with numerous other objects in the Kuiper Belt region and therefore does not have a clear path around the sun. This led to the IAU redefining Pluto as a dwarf planet in 2006, which means that it is still classified as a planet but is no longer considered a full-fledged planet.
For more question on International Astronomical Union click on
https://brainly.com/question/13015020
#SPJ11
a 300n force is applied to a bolt by a wrench at 180 degrees. the length of the wrench is 0.2m. what is the torque? justify your answer.
Answers
Torque is the rotational force acting on an object due to a force applied at a certain distance away from its pivot point. Since the force is 300N and the wrench is 0.2m away from the pivot point, the torque is 300N * 0.2m, which equals 60Nm.
The torque is the result of the force applied by a wrench multiplied by the length of the wrench. In this case, the force applied is 300N and the length of the wrench is 0.2m, so the torque is 60Nm (300N x 0.2m = 60Nm). Justification of this answer can be seen using the definition of torque. Torque is defined as the product of the magnitude of the force applied, and the distance from the force to the axis of rotation. In this case, the force of 300N is being applied at 180 degrees, so the distance from the force to the axis of rotation is 0.2m (the length of the wrench). Therefore, the torque is equal to the force multiplied by the distance, which is 60Nm (300N x 0.2m = 60Nm).
For more questions related to torque.
https://brainly.com/question/29024338
#SPJ11
The work function for barium is 2. 48ev. If light of 400nm is shined on barium cathode. What is the maximum velocity of the ejected electron?
Answers
The work function for barium is 2.48eV. If light of 400nm is shined on the barium cathode, the maximum velocity of the ejected electron is 4.54 × 105 m/s.
Energy can be transferred from electromagnetic radiation to matter in the form of photons. The energy of each photon is equal to the product of Planck's constant (h) and the frequency of radiation (ν), which is related to the wavelength (λ) by the equation c = νλ, where c is the speed of light in vacuum. Because of the photoelectric effect, which is a quantum effect in which electrons are ejected from matter when exposed to radiation with sufficiently high frequency, this energy can ionize atoms or eject electrons from metal surfaces.
The maximum kinetic energy that an electron can acquire in the photoelectric effect is equal to the energy of the incident photon minus the work function of the metal. If the metal is irradiated with monochromatic radiation, the maximum kinetic energy of the photoelectron can be calculated using the equation KEmax = hν – φ, where KEmax is the maximum kinetic energy of the ejected electron, h is Planck's constant, and φ is the work function of the metal.Barium has a work function of 2.48 eV, and radiation with a wavelength of 400 nm has a photon energy of 3.1 eV. If the photon is absorbed by a barium atom, the maximum kinetic energy of the ejected electron is:KEmax = hν – φ = hc/λ – φ = 3.1 eV – 2.48 eV = 0.62 eV.To convert this to velocity, the kinetic energy must first be converted to joules, and then to velocity using the following equation:KE = ½ mv2 ⇒ v = √(2KE/m),where m is the mass of the electron, which is 9.11 × 10–31 kg.Therefore,v = √[2(0.62 × 1.6 × 10–19)/9.11 × 10–31] = 4.54 × 105 m/s.So, the maximum velocity of the ejected electron is 4.54 × 105 m/s.
For such more questions on maximum velocity:
brainly.com/question/20595261
#SPJ11
describe the principle of hydrostatic equilibrium as it relates to the internal structure of a star. (select all that apply.)
Answers
The principle of hydrostatic equilibrium as it relates to the internal structure of a star: Hydrostatic equilibrium is a state in which a fluid is at rest and in which the pressure in the fluid is balanced by the weight of the surrounding material.
The pressure inside a star is balanced by the force of gravity, resulting in hydrostatic equilibrium inside the star. Hydrostatic equilibrium is the fundamental principle that governs the internal structure of a star. As a result, the star is prevented from collapsing under the gravitational forces acting upon it.
As a result, the star remains in a state of stability, maintaining its size and shape over long periods of time. A star's life is a delicate balance between gravitational forces that try to compress it and nuclear fusion that try to expand it.
The nuclear reactions in a star produce heat and radiation, which produces the outward force required to balance the inward force of gravity, maintaining the star's stability.
Therefore, the principle of hydrostatic equilibrium is crucial to the internal structure and stability of a star.
To know more about hydrostatic equilibrium refer here:
https://brainly.com/question/28197478#
#SPJ11
Please help me, been trying to figure it out but I cant.
Answers
A 7.00-g bullet is fired horizontally into a 1.20-kg wooden block resting on a horizontal surface. The coefficient of kinetic friction between block and surface is 0.20. The bullet remains embedded in the block, which is observed to slide 0.390 m along the surface before stopping.What was the initial speed of the bullet?Express your answer with the appropriate units
Answers
A 7.00-g bullet is fired horizontally into a 1.20-kg wooden block resting on a horizontal surface. The coefficient of kinetic friction between the block and the surface is 0.20. The bullet remains embedded in the block, which is observed to slide 0.390 m along the surface before stopping the initial velocity of the bullet was 958 m/s.
First, let's calculate the momentum of the bullet before the collision. Momentum is defined as mass times velocity, so we need to find the velocity of the bullet. We can use the fact that the bullet remains embedded in the block to determine the final velocity of the bullet-block system. The momentum of the system is equal to the mass of the system times its velocity.
Let's call the initial velocity of the bullet "v". The mass of the system is the mass of the bullet plus the mass of the block, which is 7.00 g + 1.20 kg = 1.207 kg. After the collision, the block and bullet move together at a final velocity of "vf". We can use the fact that the block slides 0.390 m along the surface before stopping to determine vf. The work done by friction is equal to the force of friction times the distance over which it acts. This work is equal to the change in kinetic energy of the system, which we know is equal to the initial kinetic energy of the bullet. We can write:
frictional force x distance = 1/2 x m x v^2
The frictional force is equal to the coefficient of kinetic friction times the normal force, which is equal to the weight of the block. We can write:
0.20 x 1.20 x 9.81 x 0.390 = 1/2 x 1.207 x vf^2
Solving for vf, we get:
vf = 2.62 m/s
Now we can use the conservation of momentum to find the initial velocity of the bullet:
m_bullet x v = (m_bullet + m_block) x vf
7.00 g x v = 1.207 kg x 2.62 m/s
v = 958 m/s
So the initial velocity of the bullet was 958 m/s.
For more such questions on velocity
brainly.com/question/29110645
#SPJ11
T or F: Surface currents flow vertically in the uppermost 400 meters of the water column. False (horizontally).
Answers
The given statement, "surface currents flow vertically in the uppermost 400 meters of the water column," is false because surface currents flow horizontally in the uppermost 400 meters of the water column. They move water parallel to the surface, driven by factors such as wind and temperature differences.
Surface currents are driven by the wind, and they are characterized by movement across the surface of the water. The direction and intensity of surface currents are influenced by a variety of factors, including wind speed and direction, the shape of the coastline, and the rotation of the Earth. These currents are an essential component of the ocean circulation system and can have a significant impact on the climate and the distribution of marine life. They flow parallel to the water columns in the uppermost parts.
Learn more about surface currents here:
https://brainly.com/question/19757282
#SPJ11
Compare and contrast how heat flows between a person and the environment for someone submerged in water and for someone in the air
Answers
Heat transfer between a person and the environment occurs through the processes of convection, conduction, and radiation. The rate of heat transfer depends on factors such as the temperature difference between the person.
What is a conduction ?Conduction is a process of heat transfer that occurs through a material or between two materials that are in direct contact with each other. In this process, heat flows from a region of higher temperature to a region of lower temperature through molecular collisions. The heat energy is transferred through the material or the contact surface by means of the vibration and movement of the molecules.
Conduction is responsible for heat transfer in solids, such as metals, ceramics, and polymers, and it can also occur between different solids in contact with each other. The rate of conduction depends on several factors, including the thermal conductivity of the material, the temperature difference between the two regions, the thickness of the material, and the surface area of contact.
To know more about Conduction visit :
https://brainly.com/question/12136944
#SPJ1
a copper wire of length 25 cm is in a magnetic field of 0.20 t. if it has a mass of 10 g, what is the minimum current through the wire that would cause a magnetic force equal to its weight?
Answers
The minimum current through the wire that would cause a magnetic force equal to its weight is 1.96 A.
The force experienced by a wire carrying a current (i) in a magnetic field (B) is given by the formula:
F = Bli
where l is the length of the wire.
The weight of the wire is given by the formula:
w = mg
where m is the mass of the wire and g is the acceleration due to gravity.
The minimum current that will cause the magnetic force on the wire to be equal to its weight is the current that makes F = w.
Find the weight of the wire using the formula:
w = mg = 0.01 kg × 9.8 m/s² = 0.098 N
Now, we can equate the weight of the wire to the force experienced by the wire in the magnetic field:
F = Bli
0.098 = 0.20 × 0.25 × i
i = 1.96
So, for the magnetic force on the wire to be equal to its weight, the current must be 1.96 A.
Learn more about current here: https://brainly.com/question/24858512.
#SPJ11
An m= 68.0 kg person running at an initial speed of
v = 4.10 m/s jumps onto an M=136 kg cart initially at rest. The person slides on the cart's top surface and finally comes to rest relative to the cart. The coefficient of kinetic friction between the person and the cart is 0.420 . Friction between the cart and can be ignored. (Let the positive direction be to the right)
(a) Find the final velocity of the person and cart relative to the ground. (Indicate the direction with the sign of your answer.) ______ m/s
(b) Find the friction force acting on the person while he is sliding across the top surface of the cart. (Indicate the direction with the sign of your answer.)
______ N
(c) How long does the friction force act on the person? ______ s (d) Find the change in momentum of the person. (Indicate the direction with the sign of your answer.)
______ N⋅s
Find the change in momentum of the cart. (Indicate the direction with the sign of your answer.)
______ N⋅s
(e) Determine the displacement of the person relative to the ground while he is sliding on the cart. (Indicate the direction with the sign of your answer.) ______ m (f) Determine the displacement of the cart relative to the ground while the person is sliding. (Indicate the direction with the sign of your answer.) ______ m (g) Find the change in kinetic energy of the person. ______ J (h) Find the change in kinetic energy of the cart.
Explain why the answers to (g) and (h) differ. (What kind of collision is this one, and what accounts for the loss of mechanical energy?)
Answers
(a) The final velocity of the person and cart relative to the ground is 0 m/s.
(b) The friction force acting on the person while he is sliding across the top surface of the cart is -28.96 N, acting in the negative direction.
(c) The friction force acts on the person for a time of 1.50 s.
(d) The change in momentum of the person is -103.2 N⋅s, acting in the negative direction.
(e) The displacement of the person relative to the ground while he is sliding on the cart is 6.07 m, acting in the positive direction.
(f) The displacement of the cart relative to the ground while the person is sliding is 3.03 m, acting in the positive direction.
(g) The change in kinetic energy of the person is -128.8 J.
(h) The change in kinetic energy of the cart is -64.4 J.
This is an inelastic collision, meaning that the kinetic energy of the system is not conserved. This is because some of the kinetic energy is lost to friction as the person slides across the cart's surface. As the person has a greater mass than the cart, the change in kinetic energy of the person is greater than that of the cart. The total kinetic energy of the system is thus decreased, as the person and cart come to rest relative to each other.
Know more about friction force here
https://brainly.com/question/30280752#
#SPJ11