[tex]{{\boxed{\mathcal{\red{It \: will \: be \: in \: your\: \: text \: book \: see}}}}}[/tex]
Identify the more polar bond in each of the following pairs of bonds:
a. HF or HCl
b. NO or CO
c. SH or OH
d. PCl or SCl
e. CH or NH
f. SO or PO
g. CN or NN
Answer:
a.HF
b.co
c.oH
d.pcl
e.NH
f.po
g.CN
a) Among HF or HCl the more polar bond is HF. b) Among NO or CO, the more polar bond is CO. c) Among SH or OH, the more polar bond is OH. d) Among PCl or SCl, the more polar bond is PCl. e) Among CH or NH, the more polar bond is NH. f) Among SO or PO, the more polar bond is SO. g) Among CN or NN, the more polar bond is CN.
To determine the more polar bond in each pair, we need to consider the electronegativity difference between the bonded atoms. The greater the electronegativity difference, the more polar the bond. Electronegativity is a measure of an atom's tendency to attract electrons towards itself in a chemical bond.
The electronegativity values (Pauling scale) for the elements involved in the bonds are:
H = 2.20
F = 3.98
Cl = 3.16
N = 3.04
O = 3.44
S = 2.58
P = 2.19
C = 2.55
a. HF or HCl
HF: Electronegativity difference = 3.98 - 2.20 = 1.78
HCl: Electronegativity difference = 3.16 - 2.20 = 0.96
The more polar bond is HF.
b. NO or CO
NO: Electronegativity difference = 3.04 - 2.55 = 0.49
CO: Electronegativity difference = 3.44 - 2.55 = 0.89
The more polar bond is CO.
c. SH or OH
SH: Electronegativity difference = 2.58 - 2.20 = 0.38
OH: Electronegativity difference = 3.44 - 2.20 = 1.24
The more polar bond is OH.
d. PCl or SCl
PCl: Electronegativity difference = 3.16 - 2.19 = 0.97
SCl: Electronegativity difference = 3.16 - 2.58 = 0.58
The more polar bond is PCl.
e. CH or NH
CH: Electronegativity difference = 2.55 - 2.20 = 0.35
NH: Electronegativity difference = 3.04 - 2.55 = 0.49
The more polar bond is NH.
f. SO or PO
SO: Electronegativity difference = 2.58 - 3.44 = -0.86
PO: Electronegativity difference = 2.19 - 3.44 = -1.25
The more polar bond is SO.
g. CN or NN
CN: Electronegativity difference = 3.44 - 2.55 = 0.89
NN: Electronegativity difference = 3.04 - 3.04 = 0
The more polar bond is CN.
Learn more about polar bond from the link given below.
https://brainly.com/question/31324076
#SPJ2
What is the charge on an electron?
A.–1
B.0
C.+1
D.+2
Answer:
definitely A
because proton is +1
Match each measurement to the correct number of significant figures it contains.
26.000 cm
0.800 km
0.00050 g
7300 m
3 x 10^5 mL
1
2
3
4
5
6
Answer:
Answer: a, b, c, d, e, f. a) 1 significant figure b) 3 significant figures c) 2 significant figures d) 4 significant figures e) 5 significant figures f) 6 significant figures Note that non-integers are rounded to the nearest integer and then count as the number of significant figures. For example, rounding 1.5 to two significant figures would mean one significant figure because it is an integer, not because it is a decimal.
Answer explanation: 26.000 cm = 2.6 x 10^2 cm. 0.800 km = 8 x 10^-3 km. 0.00050 g = 5 x 10^-4 g. 7300 m = 7.3 x 10^2 m. 3 x 10^5 mL = 3000000 ml or 300 L
Explanation:
How many significant figures are in each of these measurements?
32.14 cm
4.34 x 10^3 cm
2 g
13000 L
1.007 g/mL
6 mL
0.000005 L
2.7 mL
Answer: a, b and c contain 7 significant figures and the others each have 4 significant figures.
Incorrect answers indicate incorrect choices made for this problem or other problems on the worksheet . Answer explanation: 32.14 cm = 3.214 x 10^2cm 4.34 x 10^3cm = 4.34x10^5 cm 2 g = 2 grams 13000 L = 13 kiloliters 1.
You want to test the effect of soil acidity on plant growth. Which of the
following is an example of a controlled experiment to test this?
A. The plant type, amount of light, and amount of water are kept
constant while soil acidity is varied for plants in a greenhouse.
B. The soil acidity of plants in a garden that get light and water from
their surroundings is increased after the plants grow to a height of
100 cm.
C. The plant type, soil acidity, amount of light, and amount of water
are all varied and studied in a laboratory.
D. Soil acidity and height of plants growing in a 10 m2 yard are
measured twice in July and twice in August.
Answer:
I believe the answer to your question would be A. this is because it is controlled with a good habitat and also has good variants that are needed in a good plants growth.
Explanation:
who started water conservation in himachal pradesh
Explanation:
There are government khatris as well, which are maintained by the panchayat. Kuhls are a traditional irrigation system in Himachal Pradesh- surface channels diverting water from natural flowing streams (khuds). A typical community kuhl services six to 30 farmers, irrigating an area of about 20 ha.
Which result would support the particle theory of light? Increasing the intensity of the light causes electrons to be ejected. Frequencies of light that fall below the frequency threshold of the metal do not eject electrons. There is a time gap between when light strikes the metal and when electrons are ejected.
Frequencies of light that fall below the frequency threshold if the metal do not eject electrons.
for class ten:
compare and contrast between Mendeleev's periodic table and Moseley's periodic table.
Answer:
Mendeleev’s periodic table is, based on the relation of elements’ properties as dependent on the atomic weight of the element. But the Modern periodic table considers atomic number as the fundamental property that decides the properties of elements.
The modern periodic table does correct the defects of Mendeleev’s periodic table. For example, in Mendeleev’s periodic table, in the element pairs, Argon-potassium, cobalt-nickel, tellurium-iodine and thorium and protactinium, elements with higher atomic mass precede the element with lower atomic weight. However, it is the right places for them but is against Mendeleev’s periodic law.
These elements atomic number shows the reverse order compared to atomic mass. The supposed to be wrong positions in Mendeleev’s table has the right explanation justifying their positions.
can any one tell me same for ALCL3 I need it urgently plzzz
Lets Form bonds
Al=2,8,3
Lets Write actual configuration or modern
[tex]\\ \sf\longmapsto 1s^22s^22p^63s^3[/tex]
It has valency +3Cl:-2,8,7Let's write configuration
[tex]\\ \sf\longmapsto 1s^22s^22p^63s^23p^5[/tex]
It has valency -1Now Criss cross valency (Refer to attachment)
We get
[tex]\\ \sf\longmapsto AlCl_3[/tex]
A sunscreen preparation contains 2.70 % by mass benzyl salicylate. If a tube contains 6.0 oz of sunscreen, how many kilograms of benzyl salicylate are needed to manufacture 340 tubes of sunscreen?
We know that the sunscreen preparation contains a 2.7% by mass of Benzyl Salicylate. From this, we will find that they need 1.559 kg of Benzyl Salicylate to make 340 tubes of sunscreen.
The initial data means that if the total mass of sunscreen is M, then the mass of Benzyl Salicylate will be 2.7% of M, or:
(2.7%/100%)*M = 0.027*M
Now, we know that a tube contains 6.0 oz of sunscreen.
Then M = 6.0oz
A tube contains:
0.027*6.0oz = 0.162 oz.
Then in 340 tubes, we will need 340 times 0.162 oz of Benzyl Salicylate, this is:
340* 0.162 oz = 55.08oz
And we want this quantity in kg.
Knowing that:
1oz = 0.028kg
Then 55.08oz is 55.08 times 0.028kg:
55.08*0.028kg = 1.559 kg
So they will need 1.559 kg of Benzyl Salicylate to make 340 tubes of sunscreen.
If you want to learn more, you can read:
https://brainly.com/question/24398363
I need help on this, It’s due today. Please, anybody
Answer:
1 = 252g, 2 = 2mL, 3 = 1.5mL, 4 = 3g, 5 = 225g, 6 = 0.92g/mL, 7 = 0.75g/mL, 8 = 0.71g/mL, 9 = 1.9mL, 10= 1.11mL, 11 = 76.9g
Explanation:
This problem is testing how well you can move around the equation D = m/v where D = Density (g/mL), m= mass of sample (g), v = volume of sample (mL).
Write the molecular formula of sodium chloride and water
When a liquid flows slowly, which of the following is accurate regarding its
viscosity?
A. it has a low viscosity
B. it has a high viscosity
C. it has a negative viscosity
D. it has a neutral viscosity
Arrange the gases in increasing order of the number of atoms that make up its molecule, from left to right.
Cl₂-CH₄-SO₂-CH₂O-C₂H₄.
thank you!
Answer:
C₂H₄-CH₄-CH₂O-SO₂-Cl₂
Explanation:
The arrangement of gases in increasing order of the number of atoms that make up its molecule, from left to right, is C₂H₄-CH₄-CH₂O-SO₂-Cl₂.
What are gases?
Gas is one of the matters. It's invisible, and its particles are present very far away from each other. The atoms of the gas move randomly, and they are always in motion.
There are iii kinds of matter, solid, liquid, and gas. When there is a modification in temperature when there is a rise in temperature the solid becomes liquid and eventually, the liquid becomes gas.
The arrangement of gases in it increases the order of the number of atoms. So it can be identified by seeing the moles of elements that are shown in the chemical formula of gas.
Thus, the arrangement of gases is C₂H₄-CH₄-CH₂O-SO₂-Cl₂.
To learn more about gases, refer to the link:
https://brainly.com/question/10110040
#SPJ2
What is astronomy? Why is the study of astronomy important to humans?
Answer and Explanation:: Astronomy is the study space and what it contains. Astronomy should be studied by mankind because our survival is directly linked to the cosmos. The Earth is heated by its nearest star, the Sun, and its ocean tides are directly connected to its only satellite, the Moon.
Answer:
Astronomy is the study of stars and planets. It is important to humans because it helps us know if there is a supernova close to earth and more imformation about stars and planets that we need to know.
on what bases are the elements of periodic table classified?
The elements can also be classified into the main-group elements (or representative elements) in the columns labeled 1, 2, and 13–18; the transition metals in the columns labeled 3–12; and inner transition metals in the two rows at the bottom of the table (the top-row elements are called lanthanides and the bottom-row ...
Hello,
What are Elements?Elements are a group of the Periodic Table that shares common valence electron structures. They are arranged in order of increasing Atomic Number.
Now back to the question:-In modern periodic table they are classified into three parts- metals, non-metals and metalloids.
In detail:-
• Metals- Metals are those elements which donate electrons. Ex- Na, K, Rb, Mg, Ca, etc.
• Non-metals- Non-metals are those elements which accept electrons. Ex- N, O, F, Cl, etc .
• Metalloids- Metalloids are those elements which show property of both metals and non-metals. Ex- B, Si, Ge, etc.
Hope it helps...
(by Benjemin)
please help me it's urgent
Answer:
save my photo
who knows you might like it :>
True or false: animals use photosynthesis to make food
Milk Souring
a
Chemical Change
b
Physical Change
Answer:
Chemical Change
Explanation:
It is a chemical change because milk is a substance and if it changes its molecular structure ,so it is a chemical change.
Helium is in group 18 of the periodic table. How is helium different from the other elements in this group?(1 point)
A _ Helium atoms have a full outer energy level, while atoms of the other elements in the group do not have a full outer energy level.
B _ Helium atoms have 2 electrons, while atoms of the other elements in the group all have 18 electrons.
C _ Helium atoms have 2 valence electrons, while atoms of the other elements in the group all have 8 valence electrons.
D _ Helium atoms have valence electrons in the first energy level, while atoms of the other elements in the group have valence electrons in the second energy level.
The correct answer to the question is option C. Helium atoms have 2 valence electrons, while atoms of the other elements in the group all have 8 valence electrons.
Group 18 of the periodic table are known as the noble gas family. Their outermost shell is completely filled.
Members of the group 18 includes:
1. Helium (He)
2. Neon (Ne)
3. Argon (Ar)
4. Krypton (Kr)
5. Xenon (Xe)
6. Radon (Rn)
Among this group, only Helium (He) has a valence electron of 2. Other members of the group has a valence electron of 8.
Helium is part of the group 18 because its outermost shell is completely filled by its 2 electrons.
Therefore, option C gives the right answer to the question as helium only have 2 valence electrons while other members of the group has 8 valence electrons.
Learn more: https://brainly.com/question/18240442
Helppppp….. is this right?
Answer:
there's no attachment
Explanation:
.
Answer:
6 mL = Smallest
600 cL = Middlest
60L = Greater
How is gas pressure useful
Answer: Gas pressure is employed in a variety of industrial operations, and it was the catalyst for the industrial revolution. Many industrial machines were powered by steam in the early twentieth century. To heat the water molecules inside massive boilers, wood was burned.
Measurements of the heights of various plants in an experiment are called
Answer:
Option 1 Data
Answer:
data
Explanation:
that is the answer
please 5 stars
Suppose it takes 21 min for 2.4 g of sugar to completely react with another reagent we added to the flask. What would the reaction rate be
Mg(s) + CuSO4(aq) → Cus) + MgSO4(aq)
What are the products?
Answer:
Products are copper and magnesium sulphate
Explanation:
[tex]{ \bf{A+B→C+D}}[/tex]
A and B are reactants
C and D are products
Acrylonitrile and ethyl acetate have the same boiling point: 77.2°C. In one to two sentences, explain what outcome you would expect if a
mixture of these two substances were distilled.
plsss hurry!
Acrylonitrile and ethyl acetate can not be separated by simple distillation since they have the same boiling point.
Distillation is a separation technique in chemistry which can be applied only when the substances to be separated have different boiling points. The method relies on the difference between the boiling points of the components of a mixture in order to achieve separation.
Whereby Acrylonitrile and ethyl acetate have the same boiling point: 77.2°C, separation by distillation becomes impossible because the two substances are collected together.
Learn more: https://brainly.com/question/15946045
Give an example of a non-biological chemical reaction that involves carbon. Name the process that converts a solid compound into a gas.
Answer:
The process that converts a solid mcompound into a gas is sublimation.
E.g- dry ice, solid iodine and ammonium salts
when the above solid are heated, only particles which are found on the surface of the solid gain enough energy and break all forces of attraction and form a gas.
Explanation:
Negative effects on farming. Atleast 10 negative effects
(marks 10)
Answer:
climate change, dead zones, genetic engineering, pollutants, deforestation, soil degradation, waste, Over irrigation, salt buildup in soils, monoculture
Explanation:
Hopefully this'll help you!
A 1-L soda bottle contains dissolved carbon dioxide gas. Which bottle would have the highest concentration of dissolved gas?
a bottle that is sealed
a bottle that was opened 1 minute ago
a bottle that was opened 1 hour ago
a bottle that was opened 1 day ago
Mark this and return
Answer:
A bottle that is sealed would have the highest concentration.
Explanation:
When you put a gas into a container, the concentration or the amount of mol inside the bottle would be highly concentrated. If you open the bottle, the CO2 would spread outwards and leave the bottle giving more room between each molecule. The longer you open the bottle, the less concentrated the gas will be.
Describe the color change that would be observed in water in left hand beaker
Answer:
is there supposed to be a photo with this?
Explanation:
Please help me. I will mark you as a brainleist.
Answer:
Your answer is in the attachment. Hope this helps you. Stay blessed.