What is one way that light waves differ from sound?

The  two differences between mains electricity and that supplied by a 1.5V cell:

Power Output means the average rate of electric energy delivery during one Metering Interval.

Power output: Compared to a 1.5V cell, mains electricity has a much greater power output. This is so that more power can be delivered to devices and appliances by mains electricity, which is provided at a higher voltage and current.

Compared to a 1.5V cell, the voltage provided by mains electricity is usually much higher. A 1.5V cell produces DC (direct current) voltage, whereas the mains electricity in the majority of nations is typically supplied at a voltage of 110–120V or 22–240V AC (alternating current). The kinds of devices and appliances that can be powered by mains electricity versus those that can be powered by a 1.5V cell are affected by this difference in voltage levels.

Learn more about power output at:

https://brainly.com/question/866077

#SPJ1

Explanation:

speed = wavelength * frequency

         =   3 m  *  12 /s  = 36 m/s

The tangential speed of a point on the sphere's rim is 2.31 m/s.

An area of 0.1 T magnetic field lies perpendicular to the plane of a cycle wheel with a radius of 0.5 m, rotating at a constant rate of 10 rad/s. Between its centre and rim, there is a 0.5 V. zero EMF created.

I = (2/5) * m * r²

where m is the mass of the sphere and r is the radius.

Substituting the given values, we get:

I = (2/5) * 28.0 kg * (0.380 m)² = 1.35 kg m²

K = (1/2) * I * ω²

Substituting the given value of K and the calculated value of I, we get:

236 J = (1/2) * 1.35 kg m² * ω²

Solving for ω, we get:

ω = √(2 * 236 J / (1.35 kg m²)) = 6.62 rad/s

v = r * ω

Substituting the given value of r and the calculated value of ω, we get:

v = 0.380 m * 6.62 rad/s = 2.31 m/s.

To know more about tangential speed visit:-

https://brainly.com/question/17446849

#SPJ1

In SI units, the needed power for the air conditioner under these operating circumstances is most closely 69.3 kW.

The power required for a Carnot engine operating as an air conditioner is given by the formula

[tex]P = \frac{Q_H}{\eta },[/tex]

where [tex]Q_H[/tex] is the rate of heat removed from the house, and η is the Carnot efficiency. The Carnot efficiency is given by the formula,

[tex]\eta =\frac{ 1 - T_C}{T_H}[/tex]

where [tex]T_C[/tex] is the cold reservoir temperature (293 K) and [tex]T_H[/tex]is the hot reservoir temperature (369 K).

Thus, the power required for the air conditioner is given by:

[tex]P = \frac{14 kJ/s }{(\frac{1 - 293 K}{369 K}) }\\=\frac{ 14 kJ/s }{ (1 - 0.798) }\\[/tex]

[tex]= \frac{14 kJ/s }{ 0.202 }\\P= 69.3 kW.[/tex]

Therefore, the power required for the air conditioner under these operating conditions, in SI units, is closest to 69.3 kW.

learn more about power refer:brainly.com/question/28794336

#SPJ1

Explanation:

Seems like there might be an easier way than all of this trig work.....let me know if it is incorrect:  ( due to rounding the answer may be 8979 J )

Spectroscopy has much in common with the cosmological concept of redshift and blueshift.

Spectroscopy is the study of the interaction between matter and electromagnetic radiation, and it is commonly used to study the properties of stars and galaxies.

Redshift and blueshift, on the other hand, are phenomena that occur when light is emitted from an object that is moving away or towards an observer, respectively. These concepts are commonly used in cosmology to study the expansion of the universe and the motion of galaxies.

Spectroscopy can be used to measure the redshift or blueshift of light emitted from distant objects, providing valuable information about their distance, velocity, and composition.

learn about Spectroscopy here https://brainly.com/question/28457917

#SPJ1

Answer:

Use the formula to determine the contact area of each tire with the road.

Area divided by force yields pressure, as the equation suggests.

The weight of the car, which is 1500 kg, exerts a force on an area where pressure is at 2.2 x 10^5 Pa.

Supported by all four tires, we must first determine the total force.

Weight of car is 1500 kg multiplied by 9.8m/s^2 equals =14700 N, also known as total force.

Equally sharing the load, four tires are responsible for supporting the vehicle.

Each tire carries a force that equals the total force divided by 4, which is equivalent to 3675 N as calculated from a total force of 14700 N.

Each tire's contact area with the road can now be calculated.

3675 N divided by 2.2 x 10^5 Pa equals the area. This area can also be described as force divided by pressure.

Approximately 16.7 cm^2 or 1.67 x 10^-2 m^2 is the designated area.

The contact area between the road and each tire measures exactly 16.7 cm^2.

The speed of the object at 2 cm below the initial position is 0.45 m/s when a small object of 100 g attached to its lower end.

Given the mass of small object (m1) = 100g

The distance of object from top of spring (x) = 5cm

The point of length of object (l) = 2cm

the speed of object at 2cm below the initial position is = v

We know that F = Kx where F = mg such that:

mg = kx then [tex]100 * 10^{-3} * 9.8 = k * 5 * 10^{-2[/tex]

k = 19.6

We know that from the conservation of energy,

initial potential energy (Ui) + kinetic energy (K.E) = final PE + KE such that:

[tex]1/2kx^2 - mgx + 1/2mv^2 = 0[/tex]

[tex]1/2 * 19.6 * (0.02)^2 - 0.1 * 9.8 * 0.02 + 1/2 * 0.1 * v^2 = 0[/tex]

[tex]0.00392 - 0.0196 = -0.05v^2[/tex]

[tex]0.3136 = v^2[/tex]

v = 0.45m/s

To learn more about speed click here https://brainly.com/question/28224010

#SPJ1

Answer:

Analyze the data collected and check to see if they support the hypothesis

Explanation: A. if they already have the raw data thaat means they have already conducted the experiment so it can not be the first option

B. once you collect the raw data you need to check if it corresponds to the data so it would have to be the 2 option.

Hopes this helps.

The practices don't assist people survive earthquakes or safeguard property safety precautions to take when an earthquake occurs.

The ability of something like a building to bend, wobble, and deform again without collapsing is referred to as ductility, and it is frequently incorporated into earthquake-resistant designs. When subjected to the either vertical or horizontal shear stresses of an earthquake, a ductile structure can bend and flex.

Based just on seismic dangers in the area, buildings are made to endure a particular amount of shaking. For instance, a structure in Los Angeles would be constructed to withstand a stronger earthquakes than one in Nyc. But, seismologists do not often know the precise size.

To know more about resistant visit :

https://brainly.com/question/30799966

#SPJ9

The wave given in the diagram is a third harmonic wave

A harmonic wave is a type of wave that is characterized by its frequency, which is a multiple of the fundamental frequency. In other words, a harmonic wave has a frequency that is an integer multiple of the fundamental frequency, such as twice, three times, four times, etc. the fundamental frequency.

A third harmonic wave specifically has a frequency that is three times the fundamental frequency. It is important to note that a third harmonic wave is just one type of harmonic wave, and there can be other harmonic waves with different frequencies that are also multiples of the fundamental frequency.

Third harmonic waves can be observed in various physical systems, including musical instruments, electrical circuits, and mechanical systems. In musical instruments, for example, a third harmonic wave can produce a higher-pitched sound than the fundamental frequency, while in electrical circuits, it can result in a distortion of the signal. In mechanical systems, a third harmonic wave can cause resonance, which can lead to damaging vibrations.

NB: This wave is known as a standing wave

Learn more on harmonic waves here;

https://brainly.com/question/4290297

#SPJ1

The magnitude of the net force is 50N, directed to the right. Since there is no friction, the only horizontal force is due to the applied force. The normal force (directed upward) and the force of gravity (directed downward) exactly cancel out.

Applying pressure to a box will cause it to shift. In physical science, the concept of force is essential. Force is expressed in newtons in the metric system. (N). A tiny measure of energy is a newton. 500–1,000 newtons of energy are needed to lift the average person.

A joule is a unit of energy.

With regard to power and distance, the unit of energy is connected. In order to move something one metre with one newton of power, one joule (J) of energy is required. To drag a small book across a table, a joule of energy is roughly equivalent to that required. You can pull harder or for a longer distance if you have more stamina.

learn more about net force here:

https://brainly.com/question/13410291

#SPJ1

What is the net force on the refrigerator shown to the right?

200 N

1,000 N

50 N

= Fg

1,000 N = F.

b) Calculate the mass of the refrigerator.

c) What is the refrigerator's acceleration?

The amplitude of the graph is 4. Option D.

Amplitude refers to the maximum displacement or distance from the rest position of a vibrating object or wave. In other words, it measures the strength or intensity of the vibration or wave.

For sound waves, it determines the loudness of the sound, while for light waves, it affects the brightness of the light.

In the graph, the maximum amount of displacement of the wave is 4.

More on amplitude can be found here: https://brainly.com/question/8662436

#SPJ1

first of all you need to transform the value of the charge to the SI system which means

-65.1μC = -65.1 × 10^-6 C

then you calculate the force using this formula

F = E / |q|

F = 23648 / 65.1 × 10^-6 N

When an individual stops working out, muscles slowly lose strength (option C).

Working out means to strengthen or improve a part of one’s body by exercise.

Exercise is any activity intended to improve physical, or sometimes mental, strength and fitness.

Many at times, exercises carried out by individuals leads to build up of muscles. However, when they stop working out, this muscle loses strength.

Learn more about working out at: https://brainly.com/question/12768835

#SPJ1

Answer:

HOPE IT HELPS..........

An electron moving transverse to a uniform magnetic field, where there is nothing to interfere with its motion (such as air molecules), will continuously describe complete revolutions with no effort. That is, the electron does not gain energy (and the field does not lose energy).

When it comes to moving electric charges, electric currents, and magnetic materials, a magnetic field is a vector field that defines the magnetic influence. A force perpendicular to both the charge's own motion and the magnetic field acts on a moving charge in the field of magnetism.[1]: ch13 [3]: 278  Iron and other ferromagnetic elements are drawn to a permanent magnet's magnetic field, which also draws or repels other magnets. The three other magnetic effects of paramagnetism, diamagnetism, and antiferromagnetism also impose minute forces on materials that are considered to be "nonmagnetic"; however, these forces are typically so minute that they can only be detected by laboratory equipment. Magnetic fields encircle magnetised materials and are produced by electric currents, like those found in electromagnets, and by electric fields with changing time constants.

learn more about magnetic fields here:

https://brainly.com/question/23096032

#SPJ1

Answer:

We can use the electric field equation to find the electric field at the origin due to each point charge, and then add them vectorially to find the total electric field. The electric field due to a point charge is given by:

Explanation:

E = k * q / r^2

where k is Coulomb's constant, q is the magnitude of the point charge, and r is the distance from the charge to the point where we want to find the electric field.

A) Both charges are positive. The electric field at the origin due to charge A is:

E_A = k * q_A / r_A^2

where q_A is the magnitude of charge A, r_A is the distance from A to the origin, and we have:

q_A > 0

r_A = 3.00 cm = 0.03 m

The electric field at the origin due to charge B is:

E_B = k * q_B / r_B^2

where q_B = 2 * q_A is the magnitude of charge B, r_B is the distance from B to the origin, and we have:

q_B > 0

r_B = 5.00 cm = 0.05 m

Using Coulomb's constant k = 9.00 x 10^9 N*m^2/C^2, we get:

E_A = (9.00 x 10^9 Nm^2/C^2) * q_A / r_A^2

E_A = (9.00 x 10^9 Nm^2/C^2) * q_A / (0.03 m)^2

E_A = 1.00 x 10^12 q_A N/C

E_B = (9.00 x 10^9 Nm^2/C^2) * q_B / r_B^2

E_B = (9.00 x 10^9 Nm^2/C^2) * 2q_A / (0.05 m)^2

E_B = 7.20 x 10^11 q_A N/C

The total electric field at the origin is the vector sum of E_A and E_B. Since the charges are on the x-axis and the origin is also on the x-axis, the total electric field will be along the x-axis. Therefore, we only need to add the magnitudes of E_A and E_B to get the total electric field:

E_total = |E_A| + |E_B|

E_total = 1.00 x 10^12 q_A N/C + 7.20 x 10^11 q_A N/C

E_total = 1.72 x 10^12 q_A N/C

Substituting q_A = 2800 N/C * (0.01 m)^2 / (9.00 x 10^9 N*m^2/C^2) = 3.11 x 10^-6 C, we get:

E_total = 5.39 N/C

Therefore, the magnitude of the total electric field at the origin is 5.39 N/C, and it is directed along the positive x-axis.

B) Both charges are negative. The only difference from part A is that the charges now have negative signs, so we have:

q_A < 0

q_B = -2 * |q_A| = -2q_A < 0

Substituting these signs into the equations for E_A and E_B, we get:

E_A = -1.00 x 10^12 |q_A| N/C

E_B = -7.20 x 10^11 |q_A| N/C

The total electric field at

not sure if this solves your answer but hope it somewhat helps.

I am very pleased to be here today to welcome all of you to the laboratory.

As a prefect, I am in charge of this laboratory and I would like to take this opportunity to tell you a bit about what a laboratory is and why it is important.A laboratory is a place where scientific experiments are conducted and new knowledge is gained. The laboratory provides a safe and controlled environment for students to explore, analyze, and test out new ideas and concepts. In addition to providing a space for experimentation, the laboratory also provides access to specialized equipment and materials that can be used for research purposes.In the laboratory, you will learn how to use the scientific method to answer questions and solve problems. You will also learn how to properly use the equipment and materials found in the laboratory.This is an important skill that will help you to become a successful scientist.

learn more  about laboratory Refer:brainly.com/question/18566158

#SPJ1

Crash Course Psychology #14 focuses on the concepts of remembering and forgetting. The episode discusses various aspects of memory, such as encoding, storage, and retrieval. Encoding refers to the process of transforming information into a format that can be stored in the brain, while storage is the preservation of that information over time. Retrieval is the act of accessing and recalling stored information when needed.

Forgetting is a natural part of memory processes and can occur due to factors like decay, interference, and retrieval failure. Decay is the gradual fading of memories over time, while interference involves new information disrupting the recall of older memories. Retrieval failure happens when we are unable to access certain memories, even if they still exist in our brains.

In summary, Crash Course Psychology #14 explores the complex processes of remembering and forgetting, highlighting key concepts such as encoding, storage, retrieval, decay, interference, and retrieval failure.

For more questions on: memory

https://brainly.com/question/29608559

#SPJ11

The satellite's height above the surface of the planet is roughly 35,800 kilometers, and its orbital period is roughly 1.54 hours.

An object's speed can be defined as how quickly it is going. It measures how quickly an object travels over time. Typically, speed is measured in terms of time/distance.

The speed of the satellite must first be converted from miles per second to meters per second:

V= 6000 miles per second = 9656 m/s

The orbital radius of the satellite can then be calculated using the centripetal force equation as follows:

Fc = Fg

Gm M / r² = mv² / r

r = G M / v²

where M is the earth's mass.

By entering the specified values, we obtain:

r = (5.97 x 10²⁴ kg) x (6.67 x 10⁻¹¹N m²/kg²)/ (9656 m/s) 

r= 4.22 x 10⁷ meters

Hence, the satellite's height above the surface of the planet is:

height = r - R.

height= (4.22 x 10⁷ m) - (6.378 x 10⁶ m)

height is 3.58 x 10⁷ meters.

Now we can apply the equation for a circular orbit's period:

T = 2π r / v

When we enter the values we just discovered, we obtain:

T = 2π (4.22 x 10⁷ m) / (9656 m/s)

T = 5.56 x 10³ seconds

Hence, the satellite's orbit has a period of about 1.54 hours.

So, the satellite's height above the surface of the planet is roughly 35,800 kilometers, and its orbital period is roughly 1.54 hours.

To know more about speed, visit:

brainly.com/question/17661499

#SPJ1

The solar panels produce 1.632 kW of power.

The first step is to calculate the total energy received by the solar panels per second. To do this, we need to multiply the total area of the solar panels by the energy received per unit area and the efficiency of the panels. The efficiency takes into account any losses due to conversion of the energy into electrical power.

We are given that each 1.0 m2 of the panels receives 0.85 kJ of energy from the Sun in 1.0 s. Therefore, we can calculate the energy received by the 12 m2 of panels as:

energy received = area x energy per unit area

energy received = 12 m2 x 0.85 kJ/m2

energy received = 10.2 kJ

If the efficiency of the panels is 16%, then the power they produce is:

Power = (Efficiency × Energy) / Time

Power = (0.16 × 10.2 kJ) / 1.0 s

Power = 1.632 kW

Learn more about energy here:

https://brainly.com/question/1932868

#SPJ1

Thunder was heard 2second after the lightening .if the velocity of sound is 350m/s, the lightening is about 700 meters far.

In international agreement in 1983, the meter was redefined as the distance that light would travel in a vacuum within 1/299,792,458 of both a second, building on these and other advancements. In a vacuum, this definition also fixed the light's speed at 299,792,458 meters a second.

In terms of measurement, what does the word "meter" mean?

A typical metric unit called a meter is equivalent to around 3 feet, 3 inches. This indicates that metric measurement system includes the meter. Objects about one meter long include guitars, baseball bats, & yard poles. In athletic competitions like running and swimming, distances are also measured in meters.

The distance between the viewer and the lightning is about 700 meters.

To know more about meters visit:

brainly.com/question/30121704

#SPJ9

Answer:

If Mica sends both waves through a vacuum instead of air, water, and glass, then she would find that the waves travel at the same speed. This is because a vacuum is a completely empty space with no matter or medium to interact with, and the speed of light is constant in a vacuum. Therefore, any electromagnetic waves, including light waves, radio waves, and microwaves, would travel at the same speed in a vacuum.

According to this passage, the ultimate aim of existence is to completely experience and appreciate the state of being alive rather than merely to discover a particular purpose or significance.

"I don't think [the purpose of life] is what we're seeking," said Joseph Campbell. I believe it is an experience of life, allowing our experiences on the strictly physical plane to resonate with our innermost selves and realities, allowing us to truly feel the joy of existence.

The bravery to probe the depths, the idea of creative rebirth, and the never-ending cycle of transformation within ourselves are all fundamental themes of the hero's journey.

To know more about transformation visit:-

https://brainly.com/question/13115576

#SPJ1

During the 200-meter race, Michael Phelps moved at a speed of 1.75 metres per second.

More than any other swimmer in history, he won Olympic medals, world titles, US national titles, and set world records. Phelps has made it a priority to support the growth of swimming at all levels during his career. With a total of 28 medals, he is the most successful and decorated Olympian of all time.

Velocity = Distance / Time

In this case, the distance swum is 200 meters and the time taken is 1 minute and 54 seconds, or 114 seconds.

Velocity = 200 meters / 114 seconds

Velocity = 1.75 meters/second (rounded to two decimal places)

To know more about speed visit:-

https://brainly.com/question/28224010

#SPJ9

Astronomers believe that the disk of the Milky Way galaxy formed after the stellar halo based on several lines of evidence, including observations of the ages and motions of stars in different regions of the galaxy.

One key piece of evidence is that the stars in the halo of the Milky Way are generally much older than the stars in the disk. This suggests that the halo formed first, likely through the merging of smaller galaxies or the accretion of gas and stars from the surrounding environment.

Additionally, the stars in the halo of the Milky Way have very different motions than those in the disk. Halo stars tend to move in random, elliptical orbits, while disk stars follow more circular orbits around the center of the galaxy. This difference in motion also supports the idea that the two structures formed at different times and through different processes.

Finally, studies of the chemical composition of stars in the Milky Way also support the idea that the disk formed after the halo. The disk contains a higher proportion of heavy elements than the halo, which suggests that the disk formed from gas that had already been enriched by earlier generations of stars in the halo.

Taken together, these lines of evidence support the idea that the disk of the Milky Way formed after the stellar halo.

Learn more about astronomers here: https://brainly.com/question/2141924

#SPJ1

Atomic mass is the mass of an atom of a chemical substance shown in atomic mass units (amu). It is the sum of the masses of protons, neutrons, and electrons in an atom.

Protons are subatomic particles with a positive charge. The total number of protons in an atom ascertains its atomic number. The nucleus of an atom contains both protons and neutrons and the latter does not have any charge. Mass number is the sum total of the number of protons and number of neutrons in an atom. Mass number is expressed as a whole number and is specific to each isotope.

Atomic mass is usually measured relative to the mass of a carbon-12 atom, which is assigned a mass of exactly 12 atomic mass units. This means that the atomic mass of other elements is given in relation to the mass of carbon-12.

Learn more about atomic mass here:

https://brainly.com/question/17067547

#SPJ1