SAT College

ways of maintaining set square​

Answers

Answer 1
A set square or triangle is an object used in engineering and technical drawing, with the aim of providing a straight edge at a right angle or other particular planar angle to a baseline.

Ways of maintaining set square;

1. You have to handle your set square softly and with accuracy without exercising too much pressure on them, only the needed one to avoid movement.

2. Don’t use the T-square as a hammer - or an axe!

3. Don’t let the T-square fall on the floor.

Related Questions

Assume a recent sociological report states that university students drink 4.14 alcoholic drinks per week on average, with a standard deviation of 1.5301. Suppose Jason, a policy manager at a local university, decides to take a random sample of 150 university students to survey them about their drinking habits.
Determine the standard deviation of the sampling distribution of the sample mean alcohol consumption. Provide your answer with precision to two decimal places.

Answers

The standard deviation of the sampling distribution of the sample mean can be calculated using the formula: standard deviation of the sample mean = standard deviation of the population / square root of the sample size. In this case, the standard deviation of the sampling distribution would be 0.1258 (rounded to two decimal places).

To determine the standard deviation of the sampling distribution of the sample mean, follow these steps:

Note the population mean of alcohol consumption: 4.14 drinks per week.Note the population standard deviation: 1.5301.Determine the sample size: 150 university students.Calculate the standard deviation of the sampling distribution using the formula: standard deviation of the sample mean = population standard deviation / square root of the sample size.In this case, the calculation would be: 1.5301 / √150 = 0.1258 (rounded to two decimal places).The standard deviation of the sampling distribution of the sample mean alcohol consumption is 0.1258 (rounded to two decimal places).

This standard deviation represents the variability of the sample means that could be obtained by repeatedly sampling from the population of university students.

For more such question on standard deviation

https://brainly.com/question/475676

#SPJ8

Upload your 500-word story that describes one law, including how it relates to digital media, and summarizes a case that went to the courts and the stand of the parties involved.

Answers

One important law related to digital media is the Digital Millennium Copyright Act (DMCA).

The DMCA is a United States copyright law that addresses copyright infringement online and provides provisions for digital rights management (DRM) systems.

It criminalizes the act of circumventing technological measures used by copyright holders to protect their works and provides a safe harbor for online service providers (OSPs) if they meet certain conditions.

A notable court case related to the DMCA is the Sony BMG v. Tenenbaum case.

Joel Tenenbaum, a college student, was sued by Sony BMG for copyright infringement after he downloaded and shared copyrighted music files using a file-sharing program.

Sony BMG alleged that Tenenbaum's actions violated their rights under the DMCA.

During the trial, Tenenbaum admitted to the copyright infringement, but his defense argued that the damages sought by Sony BMG were excessive and violated his due process rights.

They claimed that the DMCA's statutory damages provision, which allowed for damages up to $150,000 per work infringed, was unconstitutional.

Ultimately, the court found Tenenbaum liable for copyright infringement and awarded damages of $675,000, which was later reduced to $67,500 on appeal.

The court upheld the constitutionality of the DMCA's statutory damages provision, stating that it was within the purview of Congress to set such damages to deter copyright infringement.

The case highlighted the contentious issue of excessive damages under the DMCA and sparked debates about the balance between protecting copyright holders' rights and ensuring fairness in copyright enforcement. It also emphasized the importance of the DMCA in addressing copyright infringement in the digital age and the potential consequences for individuals who engage in unauthorized sharing of copyrighted materials.

Remember that the above summary is a fictional scenario and not an actual court case.

It is always recommended to refer to reliable sources for accurate information on specific laws and court cases.

For similar questions on Digital Millennium Copyright Act

https://brainly.com/question/30004287

#SPJ8

Tan drew the energy transfer diagram for an MP3 player below, but he forgot to include the __________ energy output. What word completes the sentence?

Answers

Answer: The light, heat, and sound. transfer away the useful energy from the MP3 player.

Explanation:

The missing word that completes the sentence is "sound" energy.

In an energy transfer diagram for an MP3 player, various forms of energy are typically depicted.

The input energy could include electrical energy from the battery or power source.

This electrical energy is then converted into different forms as it passes through various components of the MP3 player.

The electrical energy is transformed into sound energy when it reaches the speaker or headphone output.

The sound energy produced by the MP3 player allows us to hear the audio content, such as music or spoken words.

The energy transfer diagram would typically show arrows representing the flow of energy from the input (electrical energy) to different components and eventually to the output (sound energy).

The sound energy output is the final form of energy that is generated by the MP3 player.

The sound energy output in the energy transfer diagram, we acknowledge that the purpose of an MP3 player is to produce audible sound, allowing users to listen to their favorite songs or audio content.

For similar questions on sentence

https://brainly.com/question/31693348

#SPJ8

2. In its first year, “DM Trading” had the following experience: Unit selling price birr 100 Sales 50,000 units Total fixed cost birr 400,000 TVC birr 3,000,000 Required: a) Develop TR, TC and profit functions for the company in terms of quantity b) Find the breakeven point in terms of quantity and sales volume.

Answers

a) TR = 100 * Quantity, TC = 3,400,000 birr, Profit = 3,400,000 birr.b) Breakeven point: Quantity where TR = TC. Sales volume is 3,400,000 birr.

a)  The total revenue (TR) function can be calculated by multiplying the unit selling price by the quantity sold.

In this case, TR = 100 * Q, where Q represents the quantity sold. The total cost (TC) function consists of the sum of fixed costs (FC) and total variable costs (TVC). Given that the fixed costs are 400,000 birr and the TVC is 3,000,000 birr, the TC function can be expressed as:

TC = FC + TVC = 400,000 + 3,000,000 = 3,400,000 birr.

The profit function (P) can be determined by subtracting the total cost from the total revenue, so P = TR - TC = 100Q - 3,400,000 birr.

b) The breakeven point can be found by setting the profit function equal to zero, as this is the point where total revenue equals total cost.

In this case, 100Q - 3,400,000 = 0. Solving for Q, we find Q = 3,400,000 / 100 = 34,000 units. Therefore, the breakeven point in terms of quantity is 34,000 units. To calculate the sales volume at the breakeven point, we can multiply the breakeven quantity by the unit selling price:

Sales Volume = 34,000 units * 100 birr/unit = 3,400,000 birr. Hence, the breakeven point in terms of sales volume is 3,400,000 birr.

For more questions on Breakeven point

https://brainly.com/question/32831135

#SPJ8

A
You work for Greene-Mann Landscaping Company. A client is looking to plant trees that can
provide summer shade and block winter wind. According to the document, what type of trees
should you recommend?
A. Evergreens
B. Tall deciduous trees with spreading crowns
C. Deciduous trees with lower crowns
D. Native tree species
E. Smaller shrubs

Answers

Based on the given information, the type of trees that should be recommended to the client for providing summer shade and blocking winter wind are:

B. Tall deciduous trees with spreading crowns

Tall deciduous trees with spreading crowns are effective in providing shade during the summer months when their leaves are full. Additionally, their spreading crowns can help block winter winds. These trees are known for their ability to provide both shade and wind protection.
Other Questions
Copy %20 of FCF estimate You are a research analyst and want to use the discounted froe cash flow modol to determine the enterprise value of Electrix, an electricity distribution company. You have put together the following forecast of Electrux's income gtatement over the next three years (all figures in 3 milion): Forecast incorme sfatement - ALL FIGURES IN $ MNLLON In adestion, you havo collected the following information: - Operating working capital (OWC) in each yoar will be 10% of revenue in that year - Capital expenditure (capex) will be $25 milion in ench year - The corporate tax rate is 28\%. Electrox's free cash flow to the firm (FCF) in year 2025 is $. million. Note: Please provido your answor with fwo decimal painfs in $ milon in the format of xx.nx for example, if the answer is $12.34 malion, fype in 12.34). The pressure just upstream and downstream of a hydraulic turbine are measured to be 1325 and 100 kPa, respectively. What is the maximum work, in kJ/kg, that can be produced by this turbine? If this turbine is to generate a maximum power of 100 kW, what should be the flow rate of water through the turbine, in L/min? (p = 1000 kg/m = 1 kg/L). STATEMENT OF THE PROBLEM Design a Plant to manufacture 100 Tonnes/day of ACETALDEHYDE One method of preparing acetaldehyde is by the direct oxidation of ethylene. The process employs catalytic solution of copper chloride containing small quantities of palladium chloride. The reactions may be summarized as follows: CH + 2CuCl + HO P CH,CHO+2HCl +2CuCl 2CuCl + 2HCI +CI+ 1/0 2CuCl + HO In the reaction, PdCl2 is reduced to elemental palladium and HCI and is reoxidized by CuCl During catalyst regeneration the CuCl is reoxidized with oxygen. The reaction and regeneration steps can be conducted separately or together. In the process, 99.8 percent ethylene, 99.5 percent oxygen, and recycle gas are directed to a vertical reactor and are contacted with the catalyst solution under slight pressure. The water evaporated during the reaction absorbs the exothermic heat evolved, and make-up water is fed as necessary to maintain the catalytic solution concentration. The reacted gases are water-scrubbed and the resulting acetaldehyde solution is fed to a distillation column. The tail gas from the scrubber is recycled to the reactor. Inerts are eliminated from the recycle gas in a bleed stream which flows to an auxiliary reactor for additional ethylene conversion. An analysis of the points to be considered at each step should be included. However because 99.5 percent oxygen is unavailable, it will be necessary to use 830 kPa air as one of the raw material. Prepare a design report consisting of the following: Full Marks 1. Literature Survey 15 2. Detailed flow sheet 15 3. Material and energy balance of the plant 20 4. 40 5. Design including Mechanical details of Packed Bed Catalytic Reactor Design including Mechanical details of fractionation column to separate acetaldehyde 30 6. Instrumentation and process control of the reactor 7. Plant layout Just q7 to 10(6) Calculate the fraction of atom sites that are vacant forcopper (Cu) at its melting temperatureof 1084C (1357 K). Assume an energy for vacancy formation of 0.90eV/atom.Note: 1 e Given Vo=3.5 angle122, V1=5.0 angle -10 , V2=1.9 angle92, find the phase sequence components Va, Vb and Vc. Which sentence most clearly describes mrs. whites first reaction to the story of the monkeys paw? Indicate the changes (using the shorthand representation) that you would need to make to the original KimTay Pet Supplies database design (see Figure 2-1) to support the following requirements. A customer is not necessarily represented by a single sales rep, but they can be represented by several sales reps. When a customer places an order, the sales rep who gets the commission on the invoice must be in the collection of sales reps who represent the customer. Catchment has a total area of 50,000 ha. The annual rainfall of the catchment is 1260 mm)and the average discharge at the outlet of the catchment is 10 m/s. In a six-month period, the total surface water storage in the catchment is found to decrease by 24 Mm3. During the same period, the average monthly evapotranspiration is estimated to be 25 mm. Determine the average infiltration rate in mm/day. Ignore other losses. In the accompanying diagram, what is sin E?Please see image below (math) Describe the expected relationship given the following pairs of variables. You explanation should discuss how the fwo variables could be compared to each other. 3] a) A player's distance from a dartboard and their score. b) The height of a student and the number of minutes of TV they spend watching each nigh A 13 m tank contains nitrogen at temperature 17C and pressure 600 kPa. Some nitrogen is allowed to escape from the tank until the pressure in the tank drops to 400 kPa. If the temperature at this point is 15 C and nitrogen gas behave in ideal gas condition, determine the mass of nitrogen that has escaped in kg unit. Which of the following statements is true with regard to the due diligence period included in the NCAR Stand Offer to Purchase and Contract Form 2-T?A. Buyer may provide oral or written notice of termination under the due diligence provisionB. The due diligence period will automatically expire art 5pm on the due diligence date stated in the contractC. Buyer has the right to extend the due diligence period no later than 10 days prior to the original due diligence dateD. Buyer must provide a reason for termination of contract under the due diligence provision Two isolated charged particles A and B, having charges of 1.0 uC and 4.0 LC respectively, are brought from infinity to within a separation of 10 cm. Find the change in the electric potential energy (in J) of the system during the process. Herbert Ltd manufactures parts for battery electric vehicles. The details of the two parts and relevant information are given below for one period: Product parts Part X Part Y Output in units: 7,200 10,500 Cost per unit: Direct material $35 $45 Direct labour $25 $20 Total machine hours 1,200 2,800 Number of production runs 24 35 Orders executed 120 140 Number of shipments 35 40 The data for activity centre, budgeted overhead cost and cost driver are as follows: Activity centre Budgeted overhead cost $ Cost driver Machining 180,000 Machine hours Set-up 59,000 Number of production runs Inspection/Quality control 29,500 Number of production runs Material handling 78,000 Orders executed Delivery 15,000 Number of shipments Total overhead costs $361,500Required: a) Calculate the overhead rate based on traditional overhead allocation rate with output in units as the base. Determine the total cost to produce one unit of Part X and one unit of Part Y. b) Calculate the overhead rate for each activity centre based on activity-based costing techniques. Determine the total cost to produce one unit of Part X and one unit of Part Y. c) Using the data available, explain the differences between the unit overhead costs between a) and b) above. Lab 4 Write a complete C program to switch the value of two numbers if the second number is greater than the first numbers, and then do arithmetic operation on the selected option: 1. To Add 2. To Subtract 3. To multiply 4. To divide Pseudo Code: Prompt user to enter two numbers. Get two numbers Check if first number is greater than second number Use case statement to choose your operation i.e. case 1: Add tow numbers Print result Case2: Subtract Print result ..... Find the arc length of the curve x=3sinsin3 ,y=3coscos3,0/2 What would be your after-tax amount on $1000 of interest income, if you pay a 35% tax rate on your income? $650 $100 $750 $150 $350 Determining the value of an unknown resistance using Wheatstone Bridge and calculating the stiffness of a given wire are among the objectives of this experiment. Select one: True o False Triangle 1 undergoes four different transformations. The results of these transformations are shown. Which statement best describes one of these transformations? Analyse McGregor Theories X &Y and discuss how youwould apply them as a head teacher of an educational institution toachieve Educational goals.