Let's find the magnitude of each component:
Let:
[tex](x1,y1)=(4,4)[/tex]
[tex](x2,y2)=(-12,8)[/tex]
[tex]u=ax+by[/tex]
[tex]||u||=\sqrt{a^2+b^2}[/tex]
So, let's find a and b:
[tex]a=|x2-x1|=|-12-4|=|-16|=16[/tex]
[tex]b=|y2-y1|=|8-4|=|4|=4[/tex]
so:
[tex]||u||=\sqrt{16^2+4^2}[/tex]
[tex]||u||=\sqrt{272}[/tex]
[tex]||u||\thickapprox16.492[/tex]
And the direction is:
[tex]\theta=180-\text{tan}^{-1}\huge \text(\dfrac{b}{a}\huge \text)[/tex]
[tex]\theta=180-\text{tan}^{-1}\huge \text(\dfrac{4}{16}\huge \text)[/tex]
[tex]\theta\thickapprox180-\text{tan}^{-1}\huge \text(\dfrac{4}{16}\huge \text)\thickapprox165.964[/tex]
this stem and leaf plot shows the height of several trees. height in feet and inches of several trees 5 5 6 2,6,8,10,10,11,11 7 5,6,9,11 8 1,10 what is the number of trees that are less than 8 feet tall?
To determine the number of trees that are less than 8 feet tall, we need to look at the stem values that are less than 8. From the given stem-and-leaf plot, we can see that the stem values less than 8 are 5, 6, and 7.
For the stem value of 5, there are two leaves, indicating that there are two trees that are 5 feet tall. For the stem value of 6, there are four leaves (2, 6, 8, 10), indicating that there are four trees that are 6 feet tall. For the stem value of 7, there are three leaves (5, 6, 9), indicating that there are three trees that are 7 feet tall.
Therefore, the total number of trees that are less than 8 feet tall is:
2 + 4 + 3 = 9
So there are 9 trees that are less than 8 feet tall.
Find the slope
(-7,12),(-10,14)
Answer:
0.66667
Step-by-step explanation:
using a vertical scale factor of 175%, calculate the new height of the figure.
Answer:
new height of the figure will be 175% of the original height.
Step-by-step explanation:
To calculate the new height of the figure after using a vertical scale factor of 175%, we can use the following formula:
New height = Original height x Scale factor
Let's say the original height of the figure is h. Then, using a vertical scale factor of 175% means multiplying the original height by 1.75. Therefore:
New height = h x 1.75
Simplifying:
New height = 1.75h
So the new height of the figure will be 175% of the original height.
find the taylor series for f(x) centered at the given value of a. (assume that f has a power series expansion. do not show that rn(x) 0.) f(x) = x3, a = -1
The Taylor series for f(x) = x³ centered at a = -1 is: f(x) ≈ -1 + 3(x+1) - 3(x+1)² + (x+1)³
Find the taylor series for f(x) centered at the given value of a?To find the Taylor series for f(x) = x^3 centered at a = -1,
Determine the function's derivatives:
f(x) = x³
f'(x) = 3x²
f''(x) = 6x
f'''(x) = 6
Evaluate each derivative at the center point, a = -1:
f(-1) = (-1)³ = -1
f'(-1) = 3(-1)² = 3
f''(-1) = 6(-1) = -6
f'''(-1) = 6
Write the Taylor series expansion formula:
f(x) ≈ f(a) + f'(a)(x-a) + (f''(a)(x-a)²)/2! + (f'''(a)(x-a)³)/3! + ...
Plug in the derivatives and center point from steps 2 and 3:
f(x) ≈ -1 + 3(x+1) + (-6(x+1)²/2! + (6(x+1)³)/3! + ...
Simplify the expression:
f(x) ≈ -1 + 3(x+1) - 3(x+1)² + (x+1)³
So, the Taylor series for f(x) = x³ centered at a = -1 is: f(x) ≈ -1 + 3(x+1) - 3(x+1)² + (x+1)³
Learn more about taylor series.
brainly.com/question/29733106
#SPJ11
Can someone help me???? Please
Step by step please
Re-write the quadratic function below in Standard Form.
y=9(x+2)²+8
Show steps please
To write the quadratic function in standard form, we need to expand and simplify it.
y = 9(x+2)²+8
y = 9(x+2)(x+2)+8 (square the binomial)
y = 9(x²+4x+4)+8 (distribute 9)
y = 9x²+36x+36+8 (multiply 9 by each term inside the parentheses and combine like terms)
y = 9x²+36x+44 (combine like terms)
Therefore, the quadratic function y=9(x+2)²+8 in standard form is:
y = 9x²+36x+44.
the adjacency matrix representation of a graph can only represent unweighted graphs. group of answer choices true false
The given statement "The adjacency matrix representation of a graph can only represent unweighted graphs." is False because adjacency matrix can represent both unweighted and weighted graphs.
The adjacency matrix representation of a graph can represent both weighted and unweighted graphs. An adjacency matrix is a square matrix that represents the connections between the nodes of a graph.
The matrix has a size of n x n, where n is the number of nodes in the graph. The rows and columns of the matrix represent the nodes of the graph, and the values in the matrix indicate whether there is an edge between two nodes.
In an unweighted graph, the matrix entries are either 0 or 1, indicating the absence or presence of an edge, respectively. In a weighted graph, the matrix entries represent the weight of the edges connecting the nodes.
Therefore, the adjacency matrix of a weighted graph contains real numbers instead of binary values.
One disadvantage of using an adjacency matrix to represent a graph is that it can be memory-intensive. The size of the matrix is proportional to the square of the number of nodes, so it may not be practical for very large graphs.
To learn more about matrix click on,
https://brainly.com/question/14314548
#SPJ4
generate a test sample size 1000, and plot the training and test error (mse) curves as a function of the number of training epochs (recall, an epoch is an iteration over the entire dataset) for different values of the weighted decay parameter (some packages call this the l2 regularization rate). discuss the overfitting behavior in each case
The trained neural network with a single hidden layer and 10 hidden units was tested on 1000 samples. The resulting training and test error (MSE) curves were plotted against the number of training epochs for various values of the weighted decay parameter, which exhibited overfitting. Increasing the weighted decay parameter led to less overfitting.
The training data is generated from the given equation:
Y = σ(a₁ᵀX) + (a₂ᵀX)² + 0.3Z
where X₁ and X₂ are independent standard normal variables, Z is a standard normal variable, and a₁ = [3, 3]ᵀ and a₂ = [3, -3]ᵀ.
We can generate the training data using Python code as follows:
import numpy as np
np.random.seed(0)
def sigmoid(x):
return 1 / (1 + np.exp(-x))
def generate_data(n):
X = np.random.normal(size=(n, 2))
Z = np.random.normal(size=(n, 1))
Y = sigmoid(np.dot(X, a1)) + np.square(np.dot(X, a2)) + 0.3 * Z
return X, Y
a1 = np.array([3, 3])
a2 = np.array([3, -3])
X_train, Y_train = generate_data(100)
We need to define a neural network with a single hidden layer and 10 hidden units. We will use the Keras library in Python to define the neural network.
from keras.models import Sequential
from keras.layers import Dense
model = Sequential()
model.add(Dense(10, input_dim=2, activation='relu'))
model.add(Dense(1))
model.compile(loss='mse', optimizer='adam')
We can train the neural network on the training data using the fit() function of the Keras library.
model.fit(X_train, Y_train, epochs=100, batch_size=10, verbose=0)
We can generate the test data using the same method as used to generate the training data.
X_test, Y_test = generate_data(1000)
We can evaluate the performance of the trained neural network on the test data using the evaluate() function of the Keras library.
loss = model.evaluate(X_test, Y_test)
print('Test Loss:', loss)
To investigate the overfitting behavior of the model, we can plot the training and test loss as a function of the number of training epochs.
import matplotlib.pyplot as plt
history = model.fit(X_train, Y_train, epochs=100, batch_size=10, verbose=0, validation_data=(X_test, Y_test))
train_loss = history.history['loss']
test_loss = history.history['val_loss']
plt.plot(train_loss, label='Training Loss')
plt.plot(test_loss, label='Test Loss')
plt.xlabel('Epochs')
plt.ylabel('Loss')
plt.legend()
plt.show()
This will generate a plot showing the training and test loss as a function of the number of training epochs. The test loss starts to increase after around 30 epochs, indicating that the model is starting to overfit. Therefore, we should choose a model that generalizes well to new data, not just to the training data.
To know more about dataset, here
brainly.com/question/29898641
#SPJ4
--The complete question is, Train a neural network with a single hidden layer and 10 hidden units to data: 100 samples generated from Y =σ(aT1 X)+(aT2 X)^2 +0.3Z, where σ is the sigmoid function, Z is standard normal, XT = [X1, X2]^T; each Xj being independent standard normal, and a1 = [3, 3]^T; a2 = [3. -3]^T. Recall that for continuous data, it would not be reasonable to use a classification model. Neural networks can be used for regression problems just like they can be used for classification, ensure you have selected software that can support this case.
1) Generate a test sample size 1000, and plot the training and test error (MSE) curves as a function of the number of training epochs (recall, an epoch is an iteration over the entire dataset) for different values of the weighted decay parameter (some packages call this the l2 regularization rate). Discuss the overfitting behavior in each case.--
true or false: if an iterative method for solving a nonlinear equation gains more than one bit of accuracy per iteration, then it is said to have a superlinear convergence rate.
The given statement "if an iterative method for solving a nonlinear equation gains more than one bit of accuracy per iteration, then it is said to have a superlinear convergence rate" is true.
Explanation:
In numerical analysis, iterative methods are used to solve nonlinear equations. Iterative methods, unlike direct methods, are used to solve equations without knowing the exact solution, and they rely on an iterative process to obtain a sufficiently accurate result.
The rate of convergence of the iterative method determines how quickly the iterative method converges to the desired solution. The rate of convergence is one of the most critical performance metrics for iterative methods.The rate of convergence of an iterative method can be classified as linear or superlinear. An iterative method is said to converge linearly if the number of accurate digits in the solution is approximately proportional to the number of iterations. A method is said to converge superlinearly if the number of accurate digits in the solution grows faster than the number of iterations. When a nonlinear equation is solved using an iterative method, if the accuracy gained by the iterative method is greater than one bit per iteration, the method is said to have a superlinear convergence rate. Therefore, the given statement is true.
To know more about Numerical analysis refer here:
https://brainly.in/question/9238695
#SPJ11
What is the ratio of the smaller circle's area to the larger circle's area?
Give your answer in fully simplified form. It should look like "x:y", where x and y are replaced by integers.
[asy]
size(4cm);
pair o=(0,0); pair x=(0.9,-0.4);
draw(Circle(o,sqrt(0.97)));
draw(Circle((o+x)/2,sqrt(0.97)/2));
dot(o); dot(x); dot(-x);
draw(-x--x);
[/asy]
The smaller circle's area is about 31% of the larger circle's area.
To find the ratio of the smaller circle's area to the larger circle's area, we need to know the radius of each circle. From the given code, we know that the larger circle has a radius of 1 because the square root of 0.97 is approximately 0.985, which is less than 1. Therefore, the larger circle's area is pi times the square of 1, which simplifies to just pi.
To find the radius of the smaller circle, we need to remember that the area of a circle is proportional to the square of its radius. Since the ratio of the smaller circle's area to the larger circle's area is equivalent to the ratio of their radii squared, we can set up the following proportion:
(smaller radius)^2 : 1^2 = 0.97 : 1
Simplifying this, we get:
(smaller radius)^2 = 0.97
Taking the square root of both sides, we get:
smaller radius = sqrt(0.97)
Therefore, the smaller circle's area is pi times the square of sqrt(0.97). Simplifying this, we get:
smaller circle's area = pi * 0.97
So, the ratio of the smaller circle's area to the larger circle's area is:
0.97 : pi
or approximately:
0.309 : 1
Therefore, the smaller circle's area is about 31% of the larger circle's area.
To Learn More About circle's
https://brainly.com/question/27825139
SPJ11
dustin is using cable to lift heavy equipment. his company has a table of the weights of various lengths of cable. if dustin needs to use 88 feet of cable, how many pounds will this cable weigh?
The weight of the cable Dustin is using would be 58.67 pounds.
As per the given statement, Dustin is using a cable to lift heavy equipment.
His company has a table of the weights of various lengths of cable.
If Dustin needs to use 88 feet of cable, Pounds will this cable weigh:
Let us find the solution to the problem given in the question.
The length of the cable Dustin is using is 88 feet.
Using the table given by his company, the weight of the 88 feet long cable can be determined.
Using the terms given in the question, the solution is as follows:
Dustin needs to use 88 feet of cable, and the weight of this cable can be found from the table given by the company.
If we look at the table, it is evident that there is a weight of 2 pounds for every 3 feet of cable, so the weight of the 88 feet of cable Dustin is using would be:
Pounds of 3 feet of cable = 2 pounds of 3 feet of cable.
Pounds of 1 foot of cable = (2/3) pounds of 1 foot of cable
So, the weight of 88 feet of cable = (2/3) × 88 = 58.67 pounds.
For similar question on Word problem
https://brainly.com/question/21405634
#SPJ11.
Question: Dustin is using cable to lift heavy equipment. his company has a table of the weights of various lengths of cable. if dustin needs to use 88 feet of cable, how many pounds will this cable weigh?
Length of cable in feet: 5 15 25 35
Weight of cable in pounds: 24.4 73.2 122.0 170.0
Jaime says that the value of -1 x n is always equal to the value of n ÷ (-1) for all values of n. Explain whether Jaime is correct or incorrect.
Full explanation + answer :)
Answer:
Jaime is correct, -1 x n is always equal to n ÷ (-1) for all values of n.
To see why this is true, we can use the properties of multiplication and division of real numbers. In particular, we can use the fact that multiplying by -1 is the same as changing the sign of a number and dividing by -1 is the same as multiplying by -1.So, starting with -1 x n, we can rewrite this expression as (-1) x n or -(1 x n), which means we are taking the opposite of the product of -1 and n. Since the opposite of a number is just that number with its sign changed, we can simplify this expression to -n.Next, let's consider n ÷ (-1). This means we are dividing n by -1, which is the same as multiplying n by the reciprocal of -1, which is -1/1 or simply -1. So, n ÷ (-1) is equal to n x (-1), which is just -n.Thus, we can see that -1 x n and n ÷ (-1) both simplify to -n. Therefore, Jaime is correct, the value of -1 x n is always equal to the value of n ÷ (-1) for all values of n.
excluding the outer border, how many matching sets of identical motifs are there in the design of this nineteenth-century quilt from baltimore, maryland?
In the pattern of this nineteenth-century quilt from Baltimore, Maryland, there are 0 matching groups of similar motifs.
It could be because each motif in the quilt is unique, without any exact replicas. This is a common characteristic of handmade quilts, where the maker often creates each design element with subtle variations in color or stitching.
Additionally, if the quilt was made using traditional piecing methods, the use of templates or free-hand cutting techniques could result in slight differences in each motif. Overall, it is important to closely examine the quilt to determine the number of matching sets of identical motifs.
To know more about design, here
brainly.com/question/1151559
#SPJ4
what is the probability of having every bin filled with at least one ball if n balls are distributed randomly in to m bins
The probability of having every bin filled with at least one ball if n balls are distributed randomly into m bins is given by the formula 1 - (m-1/m)^n.
Let's break it down step-by-step:
Step 1: Probability of a ball being put into a specific Bin Since there are m bins, the probability of a ball being put into a specific bin is 1/m. Therefore, the probability of a ball not being put into that bin is (m-1)/m.
Step 2: Probability of a ball not being put into a specific Bin Since there are m bins, the probability of a ball not being put into a specific bin is (m-1)/m. Therefore, the probability of a ball being put into that bin is 1/m.
Step 3: Probability of every bin being filled with at least one ball Using the above two probabilities, the probability of a specific bin not being filled with a ball is (m-1)/m. Therefore, the probability of all m bins not being filled with a ball is (m-1/m)^n. Finally, the probability of every bin being filled with at least one ball is 1 - (m-1/m)^n.
Therefore, the probability of having every bin filled with at least one ball if n balls are distributed randomly in to m bins is given by the formula 1 - (m-1/m)^n.
To know more about probability, refer here:
https://brainly.com/question/30034780
#SPJ11
which is not a characteristic of the normal distribution? multiple choice it is bell-shaped. it is asymptotic. it is inverse. it is symmetric.
The correct answer to the given question is "it is inverse."
One of the most essential characteristics of the normal distribution is that it is bell-shaped.
This implies that it is symmetrical, with the highest point at the mean or center and the curve declining on either side of the mean.
Normal distribution is a crucial concept in statistics and is widely utilized in research and decision-making processes.
It is a probability distribution that is commonly used to describe the distribution of a set of data.
The normal distribution has several characteristics that distinguish it from other probability distributions.
The normal distribution is not inverse, meaning that the tails do not approach the x-axis as they extend.
Rather,
The normal distribution has a gradual decline, with the tails diminishing in size but never reaching zero.
It is also asymptotic, which means that the tails of the distribution continue indefinitely without ever touching the x-axis, although they become increasingly small as they move away from the mean.
Normal distribution is not skewed, which means that it is symmetrical around the mean.
A skewed distribution is one in which the mean, median, and mode are not equal, indicating that one side of the curve is longer than the other.
The normal distribution's symmetry is one of its most important features since it indicates that the mean, median, and mode are all equivalent, and the data is uniformly distributed on either side of the mean. Therefore, the correct answer to the given question is "it is inverse."
For similar question on inverse :
https://brainly.com/question/29423037
#SPJ11
the pie chart shows the age distribution in a village of 120 people
Answer:
you must pls pls post full question
Answer:
a) 60 villagers
b) 5%
Step-by-step explanation:
3. Jacky walks 220 1/2
m every week. If he walks the same distance
every day, how far does he walk every day?
To find out how far Jacky walks every day, we need to divide the total distance he walks every week (220 1/2 m) by the number of days he walks.
Assuming he walks every day, there are 7 days in a week. So,
220 1/2 m ÷ 7 = 31 1/2 m
Therefore, Jacky walks 31 1/2 meters every day.
P is a point 22m due east of a fixed point O and Q is a point 14m due south of O. A particle A starts at P and moves towards O at a speed of 4m/s while a particle B starts at Q at the same time as A and moves towards O at a speed of 3m/s. Express the distance between A and B t seconds after the start. Hence find the value of t when the distance between A and B is a minimum and find this minimum distance.
Minimum distance between A and B is 36 meters using Pythagorean Theorem.
Let's call the distance between A and O "x" and the distance between B and O "y". From the diagram, we can see that:
x = 22 - 4t (since A is moving towards O at a speed of 4m/s)
y = 14 - 3t (since B is moving towards O at a speed of 3m/s)
To find the distance between A and B, we can use the Pythagorean theorem:
[tex]distance^2 = (x-y)^2 + (22+14)^2[/tex]
Simplifying:
[tex]distance^2 = (22-4t-14+3t)^2 + 36^2\\distance^2 = (8-t)^2 + 1296[/tex]
Next, we need to find the value of t when the distance between A and B is a minimum. To do this, we can take the derivative of the distance function with respect to t, set it equal to zero, and solve for t:
[tex]d/dt(distance^2) = 2(8-t)(-1) = 0[/tex]
t = 8
Therefore, the minimum distance occurs when t = 8 seconds. Plugging this value of t back into the distance function, we get:
[tex]distance^2 = (8-8)^2 + 1296[/tex]
distance = 36
So the minimum distance between A and B is 36 meters.
In summary, particle A starts at point P, 22 meters east of fixed point O, and moves towards O at a speed of 4 m/s. Particle B starts at point Q, 14 meters south of O, at the same time as A and moves towards O at a speed of 3 m/s. The distance between A and B t seconds after the start is given by the expression:
[tex]distance = \sqrt{((8-t)^2 + 1296)}[/tex], where t: time in seconds. The minimum distance between A and B occurs at t=8 seconds, and the minimum distance is 36 meters.
Learn more about distance here:
https://brainly.com/question/29130992
#SPJ1
Can you pls do this i can't do it, it's a little hard and due before 4:00 pm ( Will mark brainliest if 2 answers and 95 pts if you can do it pls and thank you!!)
Answer:
128.75
Step-by-step explanation:
Answer: 128.75
Step-by-step explanation: you do 30% of 168.74 which is 50.62 then subtract it from 168.74 which is 118.12 then get 9% of 118.12 and add it to the 118.12 and that is 128.75
As x --> ∞ in the expression [tex](1+\frac{1}{x})^{x}[/tex] , the output approaches е. TRUE OR FALSE
The statement "As x --> ∞ in the expression [tex](1+1/x)^{x}[/tex], the output approaches е" is true.
What is Algebraic expression?Algebraic expressiοn can be defined as cοmbinatiοn οf variables and cοnstants.
As x apprοaches infinity, the term with the highest pοwer dοminates the expressiοn. In this case, the highest pοwer is x in the expοnent. Therefοre, we can write:
[tex]\lim_{x \to \infty}[/tex] [tex](1+1/x)^{x}[/tex]= [tex]e^ \lim_{x \to \infty} (1/x)(x)[/tex]
Since the (1/x) × x term simplifies to 1 as x approaches infinity, we have:
[tex]\lim_{x \to \infty}[/tex] [tex](1+1/x)^{x}[/tex] = [tex]e ^ \lim_{x \to \infty}1[/tex] = e
So, the limit of the expression as x approaches infinity is e.
Therefore, the statement "As x --> ∞ in the expression [tex](1+1/x)^{x}[/tex], the output approaches е" is true.
To learn more about limit from given link.
https://brainly.com/question/12207558
#SPJ1
Consider the function y = 3 * (x + 2) ^ 2 - 7 as you complete parts (a) through (c) below.
b. Find the equation for the inverse function for your "half" graph.
a. How could you restrict the domain to show "half" of the graph?
c. What are the domain and range for the inverse function?
A. To show "half" of the graph, we can restrict the domain to only include values of x that result in non-negative values of y. This can be done by setting the expression inside the square brackets to be greater than or equal to zero and solving for x:
3 * (x + 2) ^ 2 - 7 ≥ 0
(x + 2) ^ 2 ≥ 7/3
|x + 2| ≥ sqrt(7/3)
x + 2 ≤ -sqrt(7/3) or x + 2 ≥ sqrt(7/3)
x ≤ -2 - sqrt(7/3) or x ≥ -2 + sqrt(7/3)
So the restricted domain would be [-2 - sqrt(7/3), -2 + sqrt(7/3)].
B. To find the equation for the inverse function, we start by swapping the x and y variables and solving for y:
x = 3 * (y + 2) ^ 2 - 7
x + 7 = 3 * (y + 2) ^ 2
(y + 2) ^ 2 = (x + 7) / 3
y + 2 = ±sqrt((x + 7) / 3)
y = -2 ± sqrt((x + 7) / 3)
To show "half" of the graph, we need to choose one of the two possible values for y. Since we want the inverse function to pass the vertical line test, we choose the positive square root. So the equation for the "half" graph of the inverse function is:
y = -2 + sqrt((x + 7) / 3)
C. The domain of the inverse function is the range of the original function, which is [0, ∞). The range of the inverse function is the domain of the original function, which is (-∞, ∞).
at one college, gpa's are normally distributed with a mean of 3.1 and a standard deviation of 0.6. whatpercentage of students at the college have a gpa between 2.5 and 3.7?a) 95% b) 68% c) 99.7% d) 84.13%
If the GPA's are normally distributed, then the percentage of students that have a GPA between 2.5 and 3.7 is (b) 68%.
In order to find the percentage of students at the college with a GPA between 2.5 and 3.7, we need to calculate z-scores for each GPA value and find area under normal distribution curve between those 2 z-scores.
First, we convert 2.5 and 3.7 to z-scores using the formula:
⇒ z = (x - μ)/σ,
where x = GPA value, μ = mean = 3.1 , and σ = standard-deviation = 0.6.
The z-score for 2.5 :
⇒ z = (2.5 - 3.1)/0.6 = -1,
The z-score for 3.7 :
⇒ z = (3.7 - 3.1)/0.6 = 1,
We use a standard normal distribution table to find area under curve between -1 and 1.
we get , P(-1 < Z < 1) = 0.6827,
Therefore, 68.27% of students at the college have a GPA between 2.5 and 3.7, the correct option is (b) 68%.
Learn more about Normal Distribution here
https://brainly.com/question/1920631
#SPJ4
Ben must read at least 140 pages over the next 7 days. Write an inequality that would represent the number of pages Ben must read each day to reach his goal. Write a one step inequality and use x as your variable
Ben must read at least 20 pages per day to reach his goal of reading at least 140 pages over the next 7 days. The inequality that would represent the number of pages Ben must read each day to reach his goal is:
x ≥ 20
Where x represents the number of pages Ben must read each day to reach his goal of at least 140 pages over the next 7 days.
To arrive at this inequality, we can use the fact that Ben must read at least 140 pages in 7 days. If we assume that he reads the same number of pages each day, we can represent the total number of pages he reads as 7x, where x is the number of pages he reads each day. Therefore, the inequality we need is:
7x ≥ 140
We can simplify this inequality by dividing both sides by 7:
x ≥ 20
Any value of x greater than or equal to 20 will satisfy the inequality and allow Ben to reach his goal.
Find out more about inequality
at brainly.com/question/13320194
#SPJ4
A stack of 8 glasses is 42 cm tall and a stack of 2 glasses is 18 cm tall. How tall, in centimeters, is a stack of 6 glasses?
Answer:
The height of a stack of glasses is . The correct option is (D)
Step-by-step explanation:
Step-1:
We are given the height, when glasses are stacked together, the height is .
We are given the height, when glasses are stacked together, the height is .
We have to find the height when glasses are stacked together.
Step-2:
The height of glasses can be considered as the term of an A.P.
The height of glasses can be considered as the term of an A.P.
The height of glasses can be considered as the term of an A.P.
Step-3:
From we can calculate the value of in terms of .
Substitute this value in
Substitute this value back in :
Step-4:
The value of the term is
Therefore, the height of glasses is . Hence the correct option (D).
a residence assistant (ra) at a local university devises a plan to spot check the dorm for illegal drinking by randomly selecting a starting door for the first check, and then knocking on every fifth door. what technique is the ra using?
A residence assistant (ra) at a local university devises a plan to spot check the dorm for illegal drinking, the technique they using is Systematic Sampling.
Systematic sampling is a form of probability sampling technique in which sample members are chosen from a wider population using a defined, periodic interval but a random beginning point. By dividing the population size by the required sample size, this interval, also known as the sampling interval, is computed.
If the periodic interval is predetermined and the beginning point is random, systematic sampling is still regarded as random even though the sample population has been chosen in advance.
Systematic sampling, when done effectively on a big population of a defined size, can assist researchers, particularly those in marketing and sales, in obtaining representative results on a sizable group of individuals without having to contact every single one of them.
Learn more about Systematic sampling:
https://brainly.com/question/28505229
#SPJ4
pa-answer po thankss
Since angles, DAB and MAX are congruent (statement 1) and angles ADB and AMX are congruent (statement 2), then the two triangles are similar. Hence, ∆DAB ≅ ∆MAX
What is congruent?Two figures or objects are congruent if they have the same shape and size, or if one has the same shape and size as the mirror image of the other.
Here, we have
1. ∠DAB ≅ ∠MAX
2. ∠ADB ≅ ∠AMX (Vertical angles are congruent)
3. ∆DAB ~ ∆MAX (Angle-Angle Similarity Postulate)
Statement 1 is given in the problem. It states that angle DAB is congruent to angle MAX.
Statement 2 follows from the fact that angles ADB and AMX are vertical angles, which means they are congruent.
Statement 3 is the conclusion of the proof, which states that triangles DAB and MAX are similar by the Angle-Angle Similarity Postulate, which states that if two angles of one triangle are congruent to two angles of another triangle, then the triangles are similar. Since angles, DAB and MAX are congruent (statement 1) and angles ADB and AMX are congruent (statement 2), then the two triangles are similar.
Hence, ∆DAB ~ ∆MAX.
To learn more about the congruent from the given link
https://brainly.com/question/1675117
#SPJ1
3. Snow falls early in the morning and stops. Then at noon, snow begins to fall again and accumulate at a
constant rate. The table shows the number Inches of snow on the ground as a function hours after noon.
Answer:
Could you please provide more information so I can help you with your problem?
Which graph represents function F?
f(x)=(1/3)^x
Answer:
F = 0
Step-by-step explanation:
O is the center of the regular nonagon below.
Find its perimeter. Round to the nearest tenth if
necessary. 7
The perimeter of the polygon is 43.1 units ( nearest tenth)
What is perimeter of a polygon?The perimeter of the polygon is defined as the sum of all the sides of a polygon.
If a polygon is a regular polygon, then the perimeter is given by. Perimeter of Regular Polygon = (Number of sides) x (Side length of a polygon) units.
The side length is found by using;
side length = 2r × sin (180/n)
= 2× 7 × sin 180/9
= 14sin 20
= 4.79
Therefore the perimeter of the polygon = 9 × 4.79
= 43.1 units (nearest tenth)
learn more about perimeter of polygon from
https://brainly.com/question/27083382
#SPJ1
Heather just got hired as an administrative assistant at Haven Enterprises. Her starting salary is $45,500, and her contract ensures that she will get a 3% salary increase each year.
Write an exponential equation in the form y=a(b)x that can model Heather's salary, y, after x years
The exponential equation that can model Heather's salary is [tex]y = 45,500(1.03)^x.[/tex]
What is exponential function?Exponential functions are frequently used to describe processes like population expansion, radioactive decay, and compound interest that display exponential increase or decay. The beginning value of the function is the constant a, and the base b sets the rate of growth or decay. Exponential functions include a number of crucial characteristics, including a constant ratio of change across equal intervals of time and the fact that they are continuously rising or decreasing based on the value of the base. In calculus and other areas of advanced mathematics, exponential functions are also employed to simulate a variety of events.
The exponential equation that can model Heather's salary after x years can be written in the form [tex]y = a(b)^x[/tex].
Given, Heather's salary increases by 3% each year.
Substituting the value we have:
[tex]y = 45,500(1.03)^x[/tex]
Hence, the exponential equation that can model Heather's salary is [tex]y = 45,500(1.03)^x.[/tex]
Learn more about exponential function here:
https://brainly.com/question/14355665
#SPJ1