use the impulse-momentum theorem to find how long a falling object takes to increase its speed from 4.23 m/s to 10.47 m/s?

The given statement "centripetal force in a collapsing cloud of gas and dust is strongest at the poles" is - True.

Centripetal force refers to a force that drives an object toward a fixed point, which is the center of a circular path. For example, if you tie a ball to a string and whirl it around in a circle, the string exerts a centripetal force on the ball that keeps it moving in a circle.

The force of gravity is the most common centripetal force that we encounter in nature, and it is what drives the movement of planets, moons, and other celestial objects.

During the formation of a star, a cloud of gas and dust collapses inwards due to gravity. The cloud starts to rotate as it shrinks due to the law of conservation of momentum. The centripetal force in this situation is the gravitational force that holds the cloud together.

The gravitational force, on the other hand, is stronger at the poles of the cloud. The gravitational force increases as the distance between the particles in the cloud decreases. Because the poles of the cloud are closer together, the gravitational force is stronger, and the centripetal force is also stronger.

As a result, the centripetal force in a collapsing cloud of gas and dust is strongest at the poles.

To know more about centripetal force click here:

https://brainly.com/question/14249440

#SPJ11

Answer:

they will repel, moving in opposite,

Explanation

The battery stores 6.9 MJ (megajoules) of energy. To calculate this, multiply the voltage of 12 V by the Amp-hour rating of 160 A-h. The result is 1920 watt-hours (12 V x 160 A-h = 1920 Wh). Since 1 Wh = 0.0036 MJ, the total energy stored is 1920 x 0.0036 MJ = 6.9 MJ. Answer is option e

The energy stored in a battery can be calculated by multiplying the battery's voltage (V) by its capacity in ampere-hours (Ah). In this case, the battery is rated at 12 V and 160 Ah, so the energy stored can be calculated as:

Energy (in Joules) = Voltage (in Volts) x Capacity (in Ampere-hours) x 3600 seconds

Where 3600 seconds is the number of seconds in an hour. Plugging in the given values, we get:

Energy = 12 V x 160 Ah x 3600 seconds

Energy = 6,912,000 Joules

To convert Joules to other units, we can use the following conversion factors:

1 Joule = 0.001 kilojoules (kJ)

1 Joule = 1 x 10^-6 megajoules (MJ)

Therefore, the energy stored in the battery is 6,912,000 Joules, which is equivalent to 6.9 MJ

Know more about Voltage here:

https://brainly.com/question/12999755

#SPJ11

The projectile will be moving at a speed of 57.21 m/s when it reaches the top of its trajectory.

When a projectile is fired at a speed of 138 and an upward angle of 65 degrees, the speed at the top of the trajectory can be calculated. To solve this problem, you need to understand some basic physics concepts. Here's how you can solve this problem:
1. First, identify the given values and write them down:
Initial velocity (u) = 138 m/s
Angle of projection (θ) = 65 degrees
Acceleration due to gravity (g) = 9.81 m/s²
2. Now, break down the initial velocity into its horizontal and vertical components:
Initial velocity in the horizontal direction = u cos θ
Initial velocity in the vertical direction = u sin θ
3. Use the equation of motion to calculate the time taken by the projectile to reach the top of its trajectory:
u sin θ = gt/2
t = 2u sin θ/g
4. Use the time obtained in step 3 to calculate the velocity at the top of the trajectory:
v = u cos θ
Where,
v = final velocity
u = initial velocity
θ = angle of projection
5. Substitute the given values in the equation to get the final answer:
v = u cos θ
v = 138 cos 65
v = 57.21 m/s
for such more question on projectile

https://brainly.com/question/24216590

#SPJ11

In dragging a table across a rough floor, the potential energy for friction depends on the coefficient of friction, normal force, and distance traveled by the table, hence option (a), (b), and (c) are correct.

In this case, the potential energy for friction would depend on the following quantities:

Coefficient of friction: The coefficient of friction between the table and the floor would determine how much force is required to move the table and hence, the potential energy for friction.

Normal force: The normal force acting on the table due to the weight of the table and any objects placed on it would also affect the potential energy for friction.

Distance moved: The distance the table is moved would determine the amount of work done against friction and hence, the potential energy for friction.

Surface area: The surface area in contact between the table and the floor could also affect the potential energy for friction.

Overall, the potential energy for friction depends on a combination of factors, including the properties of the surfaces in contact, the force required to move the object, and the distance moved.

Therefore correct options are (a), (b), and (c).

Suppose you were dragging a table across a rough floor. in this case, the potential energy for friction depends on which quantity or quantities? (choose all that apply)

a. The total distance the table travels.

c. The coefficient of friction between the table and the floor.

d. The normal force that the floor exerts on the table.

e. There is no potential energy for frictional forces.

Learn more about friction:

https://brainly.com/question/24338873

#SPJ11

The object that would absorb the most light is c. a black t-shirt.

The color black absorbs all wavelengths of visible light, while the other colors reflect certain wavelengths. Therefore, black is the most light-absorbent color. An object's color is determined by the light that it reflects.

When light shines on an object, some wavelengths of light are absorbed by the object, while other wavelengths are reflected back to our eyes. The wavelengths that are reflected determine the object's color. For example, a red object reflects red wavelengths of light and absorbs other wavelengths, making it appear red. Similarly, a black object absorbs all wavelengths of light, making it appear black. In conclusion, a black t-shirt would absorb the most light, as compared to a large piece of white poster board, a mirror, or a red tablecloth.

Learn more about wavelengths at:

https://brainly.com/question/20386238

#SPJ11

The pressure to which this volume of air must be compressed in order to fit into the air tank is 0.13 atm.

The ideal gas law is pV = nRT. Where p is the pressure, V is the volume, n is the number of moles, R is the universal gas constant, and T is the temperature.

The air tank is a sphere, so the volume is given by V = 4/3πr², where r is the radius. Given that the tank measures 78.0 cm wide,

the radius is r = 78.0/2

                       = 39.0 cm

                       = 0.39 m.

Hence, V = 4/3π(0.39)³

                = 0.019 m³

The biologist needs 3700 L of air, which is equivalent to 3.7 m³. Therefore, the number of moles of gas is

n = PV/RT,

where P is the pressure, R is the gas constant (8.31 J/mol·K), and T is the temperature, which we assume to be constant.

Rearranging  

P = nRT/V.

Substituting the given values,

P = (3.7)(8.31)(298)/0.019 ≈ 12720 Pa

Converting to atmospheres: 1 atm = 101325 Pa.

Therefore, the pressure to which the air must be compressed is:

P/101325 atm/Pa ≈ 0.125 atm or 0.13 atm (rounded to two significant digits).

Therefore, the answer is 0.13 atm.

To know more about ideal gas law:

https://brainly.com/question/30458409

#SPJ11

The minimum coefficient of friction required for a car travelling at 40 m/s to not slide out of a turn of radius 25 meters is 0.21.

This is determined using the equation for the maximum centripetal force that the car can withstand. This equation states that the maximum centripetal force is equal to the mass of the car times its speed squared divided by the radius of the turn multiplied by the coefficient of friction. Using this equation, 0.21 is the coefficient of friction that is required to make sure the car does not slide out of the turn.

The equation for maximum centripetal force can be written as:

F = m*v2/r * μ Where m is the mass of the car, v is the velocity of the car, r is the radius of the turn, and μ is the coefficient of friction.

Since we are solving for the coefficient of friction (μ), we can solve this equation for μ:

μ = m*v2/r * F

Plugging in the given values, we get:

μ = (1000 kg) * (40 m/s)2 / (25 m) * (10000 N) = 0.21

Therefore, the minimum coefficient of friction required for a car travelling at 40 m/s to not slide out of a turn of radius 25 meters is 0.21.

For more such questions on Coefficient of friction.

https://brainly.com/question/22696010#

#SPJ11

If two sacks, one twice as heavy as the other, are lifted the same vertical distances in the same time, the power required for each is proportional to the weight lifted.

Power is the measure of work accomplished per unit time, it is measured in joules per second or watts. Power is a scalar quantity that tells us how quickly work is being done. Power is equal to the work done divided by the time taken to do the work. Work = force x distance, Power = work/time. From the above equations, it is clear that power and weight are proportional since force and weight are proportional.

In the case of two sacks, one twice as heavy as the other, the power required to lift the heavier sack is twice that required to lift the lighter sack, this is because the weight of an object affects how much force is required to lift it. The force required to lift an object is equal to the object's weight. Therefore, if the weight of an object is doubled, the force required to lift it is also doubled, and the power required to lift it is also doubled. In conclusion, if two sacks, one twice as heavy as the other, are lifted the same vertical distances in the same time, the power required for each is proportional to the weight lifted. The power required to lift the heavier sack is twice that required to lift the lighter sack.

Learn more about force at:

https://brainly.com/question/13482747

#SPJ11

Yes, it is possible for the resultant of the electric and magnetic forces on a charge moving simultaneously through both fields to be zero.

This is due to the fact that electric and magnetic forces are perpendicular to one another, meaning that they can be in opposition and cancel each other out.

To explain in more detail, electric fields exert a force on a charged particle that is proportional to its charge and the magnitude of the electric field. This force, Fe, is given by Fe = qE.

Meanwhile, magnetic fields exert a force on a moving charged particle that is proportional to its charge, the magnitude of the magnetic field, and its velocity. This force, Fm, is given by Fm = qv × B.

Since these forces are perpendicular to each other if the electric force is equal in magnitude to the magnetic force but opposite in direction, they can cancel each other out. This will result in a net force of zero on the particle.

Therefore, it is true that it is possible for the resultant of the electric and magnetic forces on a charge moving simultaneously through both fields to be zero.

To know more about magnetic forces, refer here:

https://brainly.com/question/3160109#

#SPJ11

Answer: According to Newton's third law of motion, when you toss a backpack full of heavy books towards your friend while standing on a skateboard or in-line skates, there will be an equal and opposite reaction force acting on you, causing you to move in the opposite direction, which may be backward due to the conservation of momentum.

The centripetal force for the given question would be 16.3 N.

Explanation:

The magnitude of the centripetal force acting on a 23.3 kg boy moving along a circular path with a constant speed of 2.7 m/s and the radius of the circle is 12.9 m is 16.3 N (newton).

What is centripetal force?

Centripetal force is the net force acting on an object moving in a circular path toward the center of the circle. It always points towards the center of the circle, hence the name "center-seeking force".

What is the formula for centripetal force?

The formula for centripetal force is Fc = (mv²)/r, where Fc is the centripetal force, m is mass, v is velocity or speed and r is the radius of the circular path.

In the given question: Mass, m = 23.3 kgVelocity, v = 2.7 m/s, Radius, r = 12.9. To calculate centripetal force,

F = (m x v^2)/r

Putting the given values in the above formula: F = (23.3 kg x (2.7 m/s)^2)/12.9 m= 16.3 N (newton)

Therefore, the magnitude of the centripetal force acting on the boy is 16.3 N (newton).

To know more about centripetal force, visit:

https://brainly.com/question/11324711

#SPJ11

The magnitude of the change in the momentum of the billiard ball is 0.268 kg⋅m/s. The direction of the change of momentum vector points at 59.6 degrees, measured counterclockwise from the x-axis along the cushion.

This result can be found by using the equation for conservation of momentum, which states that both the magnitude and the direction of the momentum before and after the collision must be the same.

Since the mass and the speed of the ball changed, the direction of the vector must have changed as well. In this case, the vector changed direction from 60 degrees to 47 degrees, a difference of 13 degrees.

This means that the vector must have rotated counterclockwise by 13 degrees, or in other words, the change of momentum vector points at 59.6 degrees, measured counterclockwise from the x-axis along the cushion.

Know more about momentum here

https://brainly.com/question/30487676#

#SPJ11

We can see here that correctly completing this prompt, we have:

Current is produced in a conductor when it is moved through a magnetic field. This process of  applying a force on the free electrons  in the conductor and causing them to move.

This process of generating current in a conductor by placing the conductor in a changing magnetic field is called induction. There is no physical connection between the conductor and the magnet. The conductor, which is often a piece of wire, must be perpendicular to the magnetic lines of force in order to produce the maximum force on the free electrons.

In physics, current refers to the flow of electric charge in a circuit. It is measured in amperes (A) and is defined as the amount of charge that passes through a point in a circuit per unit time. In other words, current is the rate of flow of electric charge.

Current can flow through a variety of materials, such as wires or conductive solutions, and is driven by a potential difference, or voltage, between two points in a circuit.

Learn more about current on https://brainly.com/question/1100341

#SPJ1

The normal-mode wavelengths decrease when the air in an organ pipe is replaced by helium, at the same temperature. This is because helium has a lower molar mass than air, and therefore a lower speed of sound, which causes the normal-mode wavelengths to decrease.

The normal-mode wavelengths are determined by the length of the pipe L and the speed of sound in the pipe

V.λn = 2L/nVn is the index of the mode, which can be any integer.

When helium is used instead of air, the speed of sound in the pipe rises because the mass of the helium molecules is smaller than that of the air molecules, so the gas molecules must travel quicker to achieve the same speed. Because the wavelength of a standing wave must fit into the pipe precisely, the increase in velocity causes the wavelength to decrease. The normal-mode wavelengths will be lowered as a result of this.

Thus, the answer is the normal-mode wavelengths decrease.

Learn more about wavelengths at https://brainly.com/question/10728818

#SPJ11

The transformation between forms of mechanical energy that is happening to a falling skydiver before the parachute opens: the skydiver transforms gravitational potential energy into kinetic energy.

And then after the parachute opens, he or she transforms kinetic energy into potential energy. Before a skydiver's parachute opens, a transformation between forms of mechanical energy is happening.

When a skydiver jumps from an airplane, he or she begins to gain kinetic energy, which is the energy of motion.

As the skydiver falls, he or she transforms gravitational potential energy, or the energy stored in an object's height, into kinetic energy. The skydiver's kinetic energy increases as his or her speed increases. This means that the amount of gravitational potential energy decreases.

The skydiver transforms all of his or her gravitational potential energy into kinetic energy as he or she approaches the ground. When the parachute opens, the transformation of energy occurs again. The skydiver now converts kinetic energy, or energy of motion, into potential energy.

The parachute increases the amount of air resistance acting on the skydiver, slowing his or her descent. This reduces the skydiver's speed and converts kinetic energy into potential energy. When the skydiver lands, all of the potential energy has been transformed into kinetic energy once again.

So, before the parachute opens, the skydiver transforms gravitational potential energy into kinetic energy, and then, after the parachute opens, he or she transforms kinetic energy into potential energy.

To know more about potential energy refer here:

https://brainly.com/question/24284560#

#SPJ11

A spring with a spring constant of 54 N/m is situated on a desk. A block of mass 0.12 kg is put on top of the spring, which is 44 cm long. The height above the desk where the block rests is 0.0783 meters.

When a spring is compressed or elongated by a certain distance x, it exerts a restoring force that is proportional to the distance x, with a spring constant k.

The block will come to rest at a certain height above the desk as a result of the restoring force. As a result, we'll utilize the concept of elastic potential energy and equilibrium to find the height above the desk where the block rests.

Step 1: Find the extension of the spring.

x = F/k

where F = m g

where m is the mass of the block, and g is the acceleration due to gravity.

Substitute values in the equation

x = (0.12 kg) (9.81 m/s²) / (54 N/m) = 0.022 m = 2.2 cm

The spring has expanded by 2.2 cm when the block is put on it.

Step 2: Calculate the height of the block.

The potential energy stored in the spring is transferred to the block when it is put on the spring, and the block gains potential energy. This is the energy that the block has before it starts moving.

When the spring and the block are in equilibrium, the block's potential energy is transformed into gravitational potential energy, which is expressed as mgh, where m is the mass of the block, g is the acceleration due to gravity, and h is the height above the desk where the block is located.

mgh = 1/2 k x²h = (1/2 k x²) / mgh = (1/2 (54 N/m) (0.022 m)²) / (0.12 kg) (9.81 m/s²)h = 0.0783 m = 7.83 cm

For more question on mass click on

https://brainly.com/question/19385703

#SPJ11

The speed of the truck before the collision was 3.2 m/s.

The speed of the truck before the collision can be determined using the principle of conservation of momentum. Momentum is the product of mass and velocity. Therefore, the momentum of the truck-car system before the collision is equal to the momentum of the truck-car system after the collision.
Let us assume the speed of the car before the collision is zero. Then the momentum of the truck-car system before the collision is equal to the momentum of the truck alone. This can be expressed mathematically as:
Mbefore = MtruckVtruck = (6,300kg)(Vtruck)

Mafter = (6,300kg + 1,000kg)(2 m/s)

By equating the two equations, we can solve for V, which gives us a value of 3.2 m/s.

Therefore, the speed of the truck before the collision was 3.2 m/s.

For more such questions on Collision.

https://brainly.com/question/29865544#

#SPJ11

The velocity of the stone after 3 seconds have passed can be calculated using the formula v=u + at, where v is the velocity, u is the initial velocity, a is the acceleration (in this case the acceleration due to gravity, which is 9.8 m/s2), and t is the time. Therefore, the velocity of the stone after 3 seconds have passed will be 5.6 + (9.8*3) = 23.4 m/s.

The acceleration due to gravity causes any object to accelerate as it moves. This acceleration is always constant and acts downwards. Therefore, an object thrown with an initial velocity of 5.6 m/s will continue to accelerate and its velocity will increase. After 3 seconds have passed, the object will have an increased velocity of 23.4 m/s. In addition, when the stone is thrown off the bridge, it is subject to air resistance, which works against the stone and causes it to slow down. The magnitude of air resistance is dependent on a number of factors, such as the shape and size of the object. As such, the stone's velocity after 3 seconds might be slightly lower than the calculated value of 23.4 m/s.

Know more about velocity here:

https://brainly.com/question/29523095

#SPJ11

The tension in the string becomes four times its original value when the angular speed is doubled.

When a mass is tied to a string and swung in a horizontal circle with a constant angular speed, the tension in the string is the centripetal force that keeps the mass moving in a circular path.

Step 1: Identify the relevant forces acting on the mass.

In this case, the centripetal force is the only force that needs to be considered, and it is provided by the tension in the string.

Step 2: Understand the relationship between centripetal force (Fc),

mass (m),

radius (r),

and angular speed (ω).

The centripetal force can be calculated using the formula:
Fc = m * r * ω^2
Step 3: Analyze the effect of doubling the speed (angular speed) on the tension in the string. Since the mass and radius remain the same, we can focus on the angular speed term in the formula.

When the angular speed is doubled, we have:
New angular speed (ω') = 2 * ω
Step 4: Calculate the new centripetal force (tension) in the string.

Substituting the new angular speed into the formula, we get:
Fc' = m * r * (ω[tex]')^2[/tex] = m * r * (2 * ω[tex])^2[/tex]
Step 5: Compare the new centripetal force (tension) with the original one. By expanding the equation, we find that:
Fc' = m * r * 4 * ω^2

= 4 * (m * r * ω[tex]^2)[/tex]

= 4 * Fc

This shows that when the angular speed is doubled, the tension in the string increases by a factor of 4.

For similar question on angular.

https://brainly.com/question/13014974

#SPJ11

Perspiration dries on a person's skin. The correct answer is option B.

Vaporization is the process by which a liquid changes into a gas or vapor, and perspiration is a liquid that is secreted by sweat glands in the skin. When perspiration dries on a person's skin, it is evaporating and changing into a gas due to the heat energy from the person's body. This is an example of the physical change of state from a liquid to a gas through vaporization. The other options do not involve a change of state from a liquid to a gas, and instead involve other processes such as condensation. Hence option B  is the correct answer .

To know more about vaporization, here

brainly.com/question/30078883

#SPJ4

The relationship between the index of refraction and the speed of light in a medium is that the higher the index of refraction is: the slower the speed of light in that medium

The index of refraction is a measure of how much a light ray is bent, or refracted, as it enters a material or medium. The amount of refraction increases as the index of refraction increases, which in turn causes light to travel slower in the medium.

The index of refraction is related to the speed of light in the medium because the amount of refraction affects the speed of light in that medium. The index of refraction is a ratio between the speed of light in a vacuum and the speed of light in a medium.

This is calculated as the speed of light in a vacuum (c) divided by the speed of light in the medium (v). This ratio is usually represented as n, and so the formula for the index of refraction is: n = c/v. As the index of refraction increases, the speed of light in the medium decreases.

In a medium with a low index of refraction, the speed of light is higher than in a medium with a higher index of refraction. This is because a low index of refraction means that the light ray is not being refracted very much, so it is able to travel faster.

A higher index of refraction means that the light ray is being refracted more, so it is forced to travel slower. This explains the relationship between the index of refraction and the speed of light in a medium; the higher the index of refraction, the slower the speed of light in that medium.

To know more about the index of refraction refer here:

https://brainly.com/question/23750645#

#SPJ11

Jacob's statement that is false is "The electric field vector is tangent to the electric field line at each point." The electric field lines indicate the direction of the electric field vector, but they are not necessarily tangent.

A vector is a quantity in physics that has a value and a direction. Examples of Vector quantities are: Velocity, Acceleration, Force, Momentum, and Impulse.

Electric field lines are a visual representation of the magnitude and direction of the electric field at a given point. For a point charge, the field lines originate from a positive charge and point away from a negative charge. The direction of the electric field vector is the same as the direction of the electric field lines, however, the field lines are not always tangent to the electric field vector.

complete question:

The friends know that the field lines are a pictorial representation of the electric field at points in space. Which of Jacob's statements regarding the electric field vector and field lines is false?

The answer is 1

Learn more about the electric field vector at https://brainly.com/question/102477

#SPJ11

There are two ways of varying the normal force to measure the coefficient of friction; namely, varying the weight of the object and tilting the surface.

It is a term that refers to the force that opposes the motion of one surface on another when the two surfaces come into contact. Friction can be useful when we want to prevent the sliding of an object, but it can also be a disadvantage when we want the object to move.

In general, tilting the surface is a better way of varying the normal force to measure the coefficient of friction than varying the weight of the object. This is because the weight of the object can vary the force of gravity acting on the object, making it more challenging to calculate the coefficient of friction on the object.

On the other hand, by tilting the surface, we can achieve a more uniform change in normal force, making it easier to calculate the coefficient of friction. Additionally, by tilting the surface, we can eliminate any other factors that may affect the motion of the object, such as air resistance, making the coefficient of friction more accurate.

To know more about the coefficient of friction:

https://brainly.com/question/136431

#SPJ11

Amplitude is not measured from peak to trough, but from rest to peak or rest to trough.

The highest and lowest points on the surface of a wave are called crests and troughs respectively. The vertical distance between the peak and the trough is the height of the waves. The horizontal distance between two successive peaks or troughs is called the wavelength.

The amplitude of a wave is the maximum displacement of a particle on a medium with respect to its position of rest.

The amplitude can be thought of as the distance between rest and the peak. The amplitude from the rest position to the dip position can be measured in a similar manner.

To know more about Crest and trough, visit,

https://brainly.com/question/17778036

#SPJ4

Answer:

The electric power didn’t last very long. It lasted only as long as the chemical reaction in the battery.

Explanation:

The formula for angular velocity as a function of time when it rises linearly can be used to address this issue:

ωz(t) = ωz,0 + αz t

If t is time, z,0 is the angular acceleration at rest, and z is the starting angular velocity.

Applying the information provided, we have:

ωz,0 = -6.00 rad/s (initial angular velocity)

z (6.0 s) = +4.0 rad/s (final angular velocity)

t = 6.00 s (time elapsed) (time elapsed)

The angular acceleration z is what we're looking for.

Using the formula's supplied values as substitutes, we obtain:

-6.00 rad/s + z = +4.00 rad/s (6.00 s)

When we simplify and find z, we obtain:

Z = (5.00 rad/s - 6.0 rad/s)

/6.00 s = 1.67 rad/s^2

As a result, the wheel's angular acceleration is 1.67 rad/s2.

learn more about angular velocity here:

https://brainly.com/question/29557272

#SPJ4

The tangential acceleration of the wheel at this time point is 32 m/s².

The radius of the wheel, r = 40.0 cm = 0.4 m

The angular velocity of the wheel, ω = 10.0 rad/s

The angular acceleration of the wheel, α = 80.0 rad/s²

The tangential acceleration of the wheel  

tangential acceleration = r × angular acceleration (a = rα)

Substituting the values of r and α in the above equation,

Tangential acceleration = 0.4 m × 80.0 rad/s²

Tangential acceleration = 32 m/s²

The tangential acceleration of the wheel at this time point is 32 m/s².

To know more about angular velocity

https://brainly.com/question/30237820

#SPJ11

The conservation of angular momentum explains that a planet moves faster at perihelion due to an increase in angular velocity, resulting in an increase in linear velocity.

The conservation of angular momentum can be found as:

To learn more about the angular momentum: https://brainly.com/question/4126751

#SPJ11