True or False? In the CAC-A process, the airstream
should come from behind the electrode and
between the base metal and the electrode.

Answers

Answer 1

True, it should come from behind the electrode and

between the base metal and the electrode.

Answer 2

True is the correct answer.

The airstream should penetrate or come between the base metal and the electrode from the back during the CAC-A operation.

How does CAC-A process works-The molten metal will first travel a great distance due to the air blast. Front of the gouging operation should have metal deflection plates.The airstream should penetrate between the base metal and the electrode from the back during the CAC-A operation. All combustible materials should be removed from the work area. If not properly contained, the mass of molten metal extracted at high current levels, which is rather significant, will become a fire danger.The second element is the loud noise. A very loud noise happens when there are strong currents and strong air pressure. Arc cutters ought to use ear protection, ear muffs, or earplugs. The air carbon arc cutting procedure (CAC) is used to cut metal, gouge out damaged metal, remove outdated or subpar welds, prepare grooves for welding, and root gouge full penetration welds.When slightly ragged edges are acceptable, air carbon arc cutting is also employed.Metals are joined using it as well. Metals are cut using an oxygen-fuel gas in the technique known as "arc oxygen cutting." In this procedure, the metal is heated up by the oxygen's reaction with it, melting it.

To know more click here-

https://brainly.com/question/28346741

#SPJ2


Related Questions



A length of pipe is 6.8 meters long. How many 1.5-meter lengths of pipe can be cut from that one length of pipe?

Answers

6.8÷1.5 = 4.53...

So, it's 4 pipe with some left over.

Hope this helps!

A small PWR plant operates at a power of 485 MWt. The core, which is approximately 75.4 in. in diameter and 91.9 in. high, consists of a square lattice of 23,142 fuel tubes of thickness 0.021 in. and inner diameter of 0.298 in. on a 0.422-in. pitch. The tubes are filled with 3.40 w/o-enriched The core is cooled by water, which enters at the bottom at and passes through the core at a rate of at 2,015 psia. Compute (a) the average temperature of the water leaving the core; (b) the average power density in kW/liter; (c) the maximum heat production rate, assuming the reactor core is bare.

Answers

Based on the calculations, the average temperature of the water leaving this core is equal to 531.11 Btu/lb.

How to calculate the average temperature of the water.

Since the core is cooled by water, which enters at the bottom at 496°F, the heat input ([tex]h_{in}[/tex]) would be equal to 483.02 Btu/lb based on the steam table.

Given the following data:

Power = 485 MWt to Btu/hr = 1.635 × 10⁹ Btu/hr.Diameter = 75.4 in.Height = 91.9 in.Thickness = 0.021 in. Inner diameter = 0.298 in.Pitch = 0.422-in. Work done = 34 × 10⁶ lb/hr.

Substituting the given parameters into the formula, we have;

[tex]h_{out}= \frac{q}{w} + h_{in}\\\\h_{out}= \frac{1.635 \times 10^9}{34 \times 10^6} + 483.02\\\\h_{out}= 48.09 + 483.02\\\\h_{out}= 531.11\;Btu/lb[/tex]

How to calculate the average power density.

First of all, we would determine the area of this core by using this formula:

Area = πd²/2

Area = 3.142 × (0.298/2)²

Area = 0.0698 in².

Mathematically, the average power density is given by:

[tex]q_{av}=\frac{q}{W} =\frac{q}{\pi A^2H \times 23142} \\\\q_{av}=\frac{485 \times 10^3}{3.142 \times 0.0698^2 \times 91.9 \times 0.01639 \times 23142} \\\\q_{av}=199.5\;kW/liter.[/tex]

How to calculate maximum heat production rate.

In this scenario, we would assume the reactor core is bare. Thus, the heat is given by:

[tex]q(0) = \frac{2.32PE_1}{HE_R} \\\\q(0) =\frac{2.32 \times 485 \times 180}{23142 \times 200} \\\\q(0) =0.044 \;MW = 1.5 \times 10^8 \;Btu/hr^2[/tex]

For the maximum heat production rate, we have:

[tex]q_{max}=\frac{q(0)}{2HA^2} \\\\q_{max}=\frac{1.5 \times 10^8}{2 \times (\frac{75.4}{2} \times \frac{1}{12}) \times (\frac{0.298}{2} \times \frac{1}{12})} \\\\q_{max}=\frac{1.5 \times 10^8}{2 \times 3.1417 \times 0.00124} \\\\q_{max}=\frac{1.5 \times 10^5}{0.007791416}\\\\q_{max}=1.55 \times 10^8 \;Btu/hr.ft^3[/tex]

Read more on maximum heat here: https://brainly.com/question/13577244

Which of these processes uses a die and a press to form parts?

A) Stamping

B) Tailor-rolling

C) Hydroforming

D) Tailor-welding

Answers

The process of die forming that uses a die and a press to form parts from the given processes is called; C: Hydroforming

What are some of the steps in the die forming operations?

There are different types of die forming in sheet metal operations. Now, Hydroforming is a specialized type of die forming that uses a high pressure hydraulic fluid to press room temperature working material into a die.

Tailor Welding is a process of making welded blanks made from individual sheets of steel of different thickness, strength and even coating that are joined together by the use of laser welding.

Read more about Welding operations at; https://brainly.com/question/9450571

The machine language file is loaded onto the robot where the files can run test written as part of the program called __________________.

Answers

Answer:

C++ and Python

Explanation:

C++ and Python

4. When the ESC system senses oversteer,
A) the brake at the inner rear or front wheel is applied to neutralize the oversteering
B) the brake at the outer corner rear or front wheel is applied to neutralize the oversteering

Answers

I’m pretty sure the answer is b I’m not 100% but I think

A textile fiber manufacturer is investigating a new drapery yarn, which the company claims has a mean thread elongation of 12 kilograms with a standard deviation of 0. 5 kilograms. The company wishes to test the hypothesis H0:μ=12 against H1:μ<12 using a random sample of n=4 specimens. Calculate the P-value if the observed statistic is x⎯⎯=11. 25. Suppose that the distribution of the sample mean is approximately normal. Round your final answer to five decimal places (e. G. 98. 76543). Enter your answer in accordance to the question statement

Answers

Answer:

The p-value of the hypothsis 0.00135

Explanation:

6.
How has technology has allowed humans to thrive?

by playing an important role in evolution

by creating tools that make human life easier

by changing the structure of the human body

by inspiring healthy competition among people

Answers

By crating tool that make Humanity life easier

What event instigated germany’s push for energy from renewable resources?.

Answers

Renewable resources are those energy resources which will never end. Germany aims to be completely dependent on renewable energy resources by 2035.

What are renewable resources?

Renewable resources are those energy resources which will never end. A few examples of such energy resources are Solar Energy, Wind Energy, etc.

Germany is a European country, therefore, it is a cold country and is highly dependent on the natural resources of Russia. As the war is going on between Russia and Ukraine, it is hard for countries like Germany to put sanctions on Russia because of its dependency on its resources.

Thus, Germany wants to be a self-dependent country in terms of electricity and wants to completely stop the use of non-renewable resources for the production of electricity.

Learn more about Renewable Resources:

https://brainly.com/question/19604560

#SPJ1

why do kitchen cabinets bathtubs and attic openings require special framing details

Answers

So that they are easily opened and closed without trouble

Select the correct answer. Which of the following devices is a simple machine? A.
an engine
B.
a pulley
C.
a motor
D.
a bicycle
E.
a crane

Answers

Answer:

A Pulley would be a simple machine.

Explanation:

A pulley has only has one kind of movement

Answer:

a pulley

Explanation:

letter B.

An undeformed specimen of some alloy has an average grain diameter of 0.040 mm. You are asked to reduce its average grain diameter to 0.010 mm. Is this possible

Answers

Answer:

Yes it is possible. Grain size is often determined by the rate so Firstly reduce the average grain diameter of an undeformed alloy specimen form 0.040 mm to 0.10mm

Tech A says that a parasitic draw is measured in volts. Tech B says that pulling fuses one at a time can help locate a parasitic draw. Who is correct

Answers

Answer:

Tech B

Explanation:

Compute the theoretical density of diamond given that the C-C distance and bond angle are 0.154 nm and 109.5o, respectively. The atomic weight of carbon is 12.01 g/mol.

Answers

The theoretical density of diamond given that the C-C distance and bond angle are 0.154 nm and 109.5° respectively is; 3.54 g/cm³

What is the Theoretical Density?

The first thing we will do is to get the unit cell edge length from the given C - C distance.

From the structure of diamond;

Φ = ¹/₂ * bond angle

Φ = ¹/₂ * 109.5°

Φ = 54.75°

Thus;

θ = 90° - 54.75°

θ = 35.25°

Let the height from a point to the base of the cube of the structure be x. Thus;

x = a/4 = y sin θ

where a is unit cell edge length and y is C -C length. Thus;

a = 4y sin θ

a = 4 * (0.154 * 10⁻⁹) * sin 35.25°

a = 3.56 * 10⁻⁸ cm

The unit cell volume is;

V_c = a³

Thus; V_c = (3.56 * 10⁻⁸)³

V_c = 4.51 * 10⁻²³ cm³

Now, there are 8 equivalent atoms per unit cell and as such density is calculated from;

ρ = (n * A_c)/(V_c * N_a)

A_c is atomic weight of diamond = 12.01 g/mol

N_a is avogadro's number = 6.022 * 10²² atoms/g

Thus;

ρ = (8 * 12.01)/(4.51 * 10⁻²³ * 6.022 * 10²²)

ρ = 3.54 g/cm³

Read more about Theoretical Density at; https://brainly.com/question/14831455

With direct fuel injection the gasoline is injected:

Answers

Answer:

Gasoline is injected directly into the cylinder.

Explanation:

In a direct injection system, the air and gasoline are not pre-mixed. Rather, air comes in using the intake manifold, while the gasoline is injected directly into the cylinder.

A coastal engineer is to an oil platform as a structural engineer is to:

a freeway.

a skyscraper.

submarine pipelines.

an underground tunnel.

Answers

Answer:

I think the answer is d: underground tunnel

Explanation:

Hope this helps

The answer is Dan unground tanel

Explain and show work:
Calculate (413,465,789 mod 6), giving an answer between 0 and 5, and using a small number of steps. Show your steps.

Answers

Answer:

  5

Explanation:

The sum of the digits of the number is ...

  (4+1+3)+(4+6+5)+(7+8+9) = 8+15+24 = 47

The sum of those digits is 4+7=11, and those digits sum to 1+1 = 2.

That is, the value of the number mod 9 (or 3) is 2.

The ones digit is odd, so the value of the number mod 2 is 1.

This combination of modulo values tells you the mod 6 result is 5.

_____

Additional comment

We can look at the (mod2, mod3) values of the numbers 0 to 5:

  0 ⇒ (0, 0)

  1 ⇒ (1, 1)

  2 ⇒ (0, 2)

  3 ⇒ (1, 0)

  4 ⇒ (0, 1)

  5 ⇒ (1, 2) . . . . the mod {2, 3} results we have for the number of interest.

This process of adding up the digits repeatedly is referred to as "casting out 9s." The result of it is the modulo 9 value of the number (with 0 mapped to 9). Checking the mod 9 result of arithmetic operations is one quick way to spot certain kinds of errors. It can also be used as part of a divisibility test for 3 or 9.

Select three jobs that ſvould be undertaken by someone just starting his or her career as an environmental
engineer.
designing a renewable water system in a remote area
designing a bridge that will cross a major river
designing a building that can withstand a massive earthquake
designing a car that emits less carbon emissions than previously designed automobiles
designing a greenhouse to reduce pollution and provide food

Answers

Answer:

1 and 2 and 3

Explanation:

what causes your car to eventually slow down and stop when you take your foot off the gas pedal

Answers

Inertia man I’m telling you

NEED HELPASAP what is the moisture content of a board if a test sample that originally weighed 11. 5 oz was found to weigh 10 oz after oven drying?

Answers

Answer:

11.5-10/10= 0.15x100 =15%

Explanation:

The moisture content of the board is 13.04% as per the given data.

What is moisture content?

Simply said, a product's moisture content is its water content. It affects a substance's weight, density, viscosity, conductivity, and other physical characteristics.

The original weight of the test sample was 11.5 oz, and the weight of the sample after oven-drying was 10 oz.

The amount of moisture lost during the oven-drying process is equal to the original weight of the sample minus the weight of the sample after drying, or:

11.5 oz - 10 oz = 1.5 oz

To calculate the moisture content, you then divide the amount of moisture lost by the original weight of the sample and multiply by 100 to express the result as a percentage:

(1.5 oz / 11.5 oz) x 100% = 13.04%

Thus, the moisture content of the board is 13.04%.

For more details regarding moisture content, visit:

https://brainly.com/question/13724830

#SPJ2

A blue and a yellow cubes are rolled- What is the probability that a yellow cube is a multiple of 3 and the product is 6?

Answers

Answer:

2/6 cause there is 2 ways to get 6, 6 × 1 and 3×2 and 6 and 3 are multiples of 3

Which sentence from the passage uses passive voice?

Question 9 options:

a)

E-books also make reading easier for people with disabilities. (paragraph 12)


b)

M.K. sees it another way. (paragraph 16)


c)

In one year, e-reader production released 2350 million kilograms of carbon dioxide into the atmosphere. (paragraph 8)


d)

The Diamond Sutra was printed in China in 868 AD. (p

Answers

Answer:

"The Diamond Sutra was printed in China in 868 AD." (paragraph 4)

Explanation:

I took the test

Equipment consisting of busbars mounted inside an enclosure that provides a means of tapping the service-entrance conductors is called a

Answers

Answer:

busway

Explanation:

State kirchoffs laws​

Answers

Explanation:

Kirchhoffs Voltage Law or KVL, states that “in any closed loop network, the total voltage around the loop is equal to the sum of all the voltage drops within the same loop” which is also equal to zero. In other words the algebraic sum of all voltages within the loop must be equal to zero.

PLEASE MARK ME BRAINLIEST IF MY ANSWER IS CORRECT PLEASE

What type of cartilage provides support and shock absorption?.

Answers

Answer:

fibrocartilage

8.
Mechanical engineer Junee is switching sub-fields. She’s interested in creating better artificial limbs for injured veterans and others who need them. What specialty is Junee moving into?

electronic

structural

biotechnological

robotics

Answers

Answer: Robotics
I’ve researched this and also I guess…in robotics you get to build and design robots as well as test them and since Junee wants to build an artificial limb moving into robotics would be the best choice for her.

Yw

In what way is a parallel circuit different from a series circuit?

Answers

I don’t have any time to go to bed so I can get a ride home you guys too and I’ll let you know when I

A plant has ten machines and currently operates two 8-hr shift per day, 5 days per week, 50 weeks per year. the ten machines produce the same part each at a rate of 30 pc/hr. (a) determine annual production capacity of this plant. (b) if the plant were to operate three 8-hr shifts per day, 6 days per week, 51 weeks per year, determine the annual percentage increase in plant capacity

Answers

Answer:

  83.6%

Explanation:

(a)

On its current schedule, the plant can theoretically produce ...

  (30 pc/h/machine)(10 machine)(8 h/shift)(2 shift/day)(5 day/wk)(50 wk/yr)

  = (30)(10)(8)(2)(5)(50) pc/yr = 1,200,000 pc/yr

__

(b)

On the proposed schedule, this production becomes ...

  (30 pc/mach)(10 mach)(8 h/sh)(3 sh/da)(6 da/wk)(51 wk/yr)

  = (30)(10)(8)(3)(6)(51) pc/yr = 2,203,200 pc/yr

The increase in capacity is ...

  (2,203,200/1,200,000 -1) × 100% = 83.6% . . . capacity increase

_____

Additional comment

The number of parts per shift did not change. Only the number of shifts per year changed. It went up by a factor of (3/2)(6/5)(51/50) = 1.836. Hence the 83.6% increase in capacity.

We have to assume that maintenance and repair are done as effectvely as before in the reduced down time that each machine has.

In order for communication to be considered two-way, _________ is necessary a. channel b. message c. noise d. feedback e. circuit

Answers

Answer:

the answer c or e or do wha t the first guy do

Please explain the term ‘causal link’. What is the importance of the causal link
in work accidents? What kind of situations breaks the causal link? Explain all
situations with examples.

Answers

Answer:

:)

Explanation:

The correlation between a factor and an outcome could be a coincidence, or it could be caused by a completely different factor. For example, as ice cream sales increase, sales of meat for barbecues also increase.

Advantage and disadvantages of Bessemer process of steel making

Answers

Advantages:

- allowed steel to be produced without fuel

- using the impurities of the iron to create the necessary heat

- reduced the costs of steel production

Disadvantages:

- could convert only a pig iron low in phosphorus and sulfur

- these elements could have been removed by adding a basic flux such as lime, but the basic sl*g produced would have degraded the acidic refractory lining of Bessemer's converter.

au revoir mon amour <3

Other Questions
Using the three health websites given in the unit, or other reliable websites you are aware of, research a health concern you have. If a certain health condition or disorder runs in your family, consider using that topic. Otherwise, choose a health disease or disorder you want to know more about. While researching, note information you find important, and be sure to find out the answers to these questions:How is the disease/disorder diagnosed?What are the treatment methods available?Are there any recent technological or research-based developments that make diagnosis and/or treatment easier or more readily available?Step 2: Think about itConsider why it would be important to use more than one health resource to gather information?Step 3: Design an informational brochureEither digitally or on paper (much like the ones you would see at a doctors office), create an informational brochure that provides reliable and helpful information on the health concern, including how the disease/disorder is diagnosed and treated. Use the front of the brochure to try to grab the attention of a reader. Towards the back, note websites and resources where they can go to learn more about the disease/disorder, and in a small note, include a reason why more than one resource is recommended to gather more information. Nacl has a delta.hfus = 30.2 kj/mol and a delta.hvap = 171 kj/mol. what mass of nacl releases 452 kj of heat as it changes into a liquid? During the mid-19th century, women were indreasinglyO A. emigrate to other countries,B. vote in federal elections,C. control their family financesO D. receive a college education PLEASE HELPPPPPPPPPP!!!!!!Find the surface area of the pyramid to the nearest whole number.115 in2186 in2230 in2179 in2 Which of the following is not one of the themes frequently depicted during the harlem renaissance? a. liberation b. suffering c. freedom d. intellectual power please select the best answer from the choices provided a b c d describe the unspoken policy about unlocked doors. why do you they leave it unlocked Choose the correct translation of the following time.3:10 1. Why was the INF Treaty an important change in the Cold War arms race?The Soviet Union removed its INFs from eastern Europe and the U. S. Got rid of the Strategic Defense Initiative. O It cut the number of INFs almost to zero, and allowed the U. S. And Soviet Union to inspect each other's military bases. The U. S. Removed its INFs from western Europe and the Soviet Union accepted the Strategic Defense Initiative. It pledged both the U. S. And the Soviet Union to getting rid of all nuclear weapons by 1990. What is a landslide?Movement of earth materials up a slope.Movement of water up a slope.Movement of water down a slope.Movement of earth materials down a slope. ill mark brainlyest What is a contraction in a sentence?Please I need help!Can somebody answer my question?Anybody?Please! 1. click here to access an interactive simulation where you will explore the transfer and transformations of different types of energy that you have learned about in this lesson. 2. click the systems box, and then select the energy symbols box. this will allow you to see the movement of energy and its type in the system. 3. under the bike the person is riding, drag the blue rectangle to the right to start the system. 4. the chemical energy in the person's body is transformed into when they peddle the bike, causing the generator to rotate. some energy in the bike wheel is lost to . the generator produces electricity, which heats the water, causing it to produce thermal energy in the form of steam. when the person's chemical energy runs out, how do you replenish it? 5. change the initial energy source to sun, the intermediate energy source to the solar panel, and the final energy source to the windmill. in this system, is produced from the sun and transformed into electricity in the solar panel. both of these types of energy are considered forms of . the result of this system is that the windmill produces mechanical energy. 6. try a few more scenarios, choosing different initial, intermediate, and final energy sources. observe places where energy is transformed and lost. creating systems with the least amount of energy is important in engineering design. 100 Points!! 0_0Solve and check for extraneous solutions.5(3x+1)^1/2=10Please SHow Steps!!! WIll give the brainiest!! In your own words, what was the purpose of this lab?Hypothesis:In this section, please include the if/then statements you developed during your lab activity. These statements reflect your predicted outcomes for the experiment.Test One: If I breed a short fur, FF female with a short fur, Ff male, then I will expect to see (all short fur; some short and some long fur; all long fur) offspring.Test Two: If I breed a short fur, Ff female with a short fur, Ff male, then I will expect to see (all short fur; some short and some long fur; all long fur) offspring.Test Three: If I breed a long fur, ff female with a long fur, ff male, then I will expect to see (all short fur; some short and some long fur; all long fur) offspring.Procedure:The procedures are listed in your virtual lab. You do not need to repeat them here. Please be sure to identify the test variable (independent variable) and the outcome variable (dependent variable) for this investigation.Remember, the test variable is what is changing in this investigation. The outcome variable is what you are measuring in this investigation.Test variable (independent variable):Outcome variable (dependent variable):Data:Record the data from each trial in the data chart below. Be sure to fill in the chart completely.Test OneParent 1: FFParent 2: FfPhenotype ratio:________ :________short fur :long furTest TwoParent 1: FfParent 2: FfPhenotype ratio:________ :________short fur :long furTest ThreeParent 1: ffParent 2: ffPhenotype ratio:________ :________short fur :long furConclusion:Your conclusion will include a summary of the lab results and an interpretation of the results. Please write in complete sentences.Which genotype(s) and phenotype for fur length are dominant?Which genotype(s) and phenotype for fur length are recessive?If you have a hamster with short fur, what possible genotypes could the hamster have?If you have a hamster with long fur, what possible genotypes could the hamster have?Did your data support your hypotheses? Use evidence to support your answer for each test.Test One:Test Two:Test Three:Which hamsters are the parents of the mystery hamster? Include evidence to prove that they are the correct parents.In this lab, you will investigate how organisms inherit traits.Objectives:explain that every organism requires a set of instructions that specifies its traitsexplain the difference between dominant and recessive traits or allelesrecognize phenotype as the physical expression of the genotyperecognize genotype as the collective sum of all alleles and their specifying traitsanalyze animals to demonstrate evidence of the hereditary information that is passed from one generation to another. Welcome to Hamster Haven!We are the world's largest pet store and research facility dedicated to studying hamster heredity.Inside we have a team of geneticists who oversee the breeding and offspring of the hamsters to ensure that we have many varieties for our customers to choose from.Recently, our team of geneticists has been studying how hamsters inherit fur length.You are invited to join our team to assist in the process.Let's take a look at our geneticist notebook to learn more about how traits are inherited.Let's take a closer look at cells. Inside of each cell is a nucleus. The nucleus is like the command center for the cell and houses all of the cell's genetic material, called chromosomes. Tightly wrapped in the chromosomes are individual proteins, called genes, on strands of DNA.raits are determined by the genes the hamsters inherit.Each hamster can inherit the trait for long fur or the trait for short fur.Let's examine the hamsters that you will be investigating today.Select each hamster to learn more about its dominant and recessive traits.Dominant TraitRecessive Trait Three types of chemical weathering processes are particularly important for transforming minerals within rocks into weathered products. These are hydrolysis, oxidation, and dissolution. Through hydrolysis reactions, minerals are weathered in the presence of water. Hydrolysis takes place when acid rain reacts with rock-forming minerals such as feldspar to produce soluble minerals that are removed in solution. Through oxidation reactions, iron-rich materials transform in the presence of oxygen in the air. Oxidation is responsible for why an apple may turn brown after your cut it open and place it in an open space. And through dissolution, minerals dissolve in water, making their chemical products ions within water. Example: Halite (NaCl) usually forms where ocean water evaporates. On the otherhand, it undergoes dissolution when placed in water. You will sort each example into its category of chemical weathering process. Drag the appropriate items into their respective bins Lane loads his stuck with 3 tons of bricks. How many pounds of bricks does he have While playing a real-time strategy game, Juan created military units for battle: long swordsmen, spearmen, and crossbowmen.Long swordsmen require 75 units of food and 25 units of gold. Spearmen require 40 units of food and 30 units of wood.Crossbowmen require 30 units of wood and 40 units of gold. If Juan used 1475 units of gold, 1500 units of wood, and 4025 unitsof food to create the units, how many of each type of military unit did he create?Juan createdlong swordsmen.Parti How can a reader best decide if a scientific article is current?The reader can check the authors biographical information.The reader can find the copyright date.The reader can look for factual information.The reader can see if the article has multiple sources.I WANT TO GIVE SOMEONE POINTS Which of these would have been a positive effect of the Columbian Exchage? Compared to other fruits like apples, avocados have an extremely short Shelflife. Does this make iteasier or harder for you to supply avocados? Why? If we stopped burning fossil fuels today, what would happen to the climate?.