The scale of a map is 1:1,000,000. The real distance of two points if their distance on the map is 35 mm is 35 km.
If the scale of a map is 1:1,000,000, it means that 1 unit on the map represents 1,000,000 units in real life. To find the real distance between two points given a 35 mm distance between them on the map, we can use the following formula:
Real distance = Map distance / Map scale
First, we need to convert the 35 mm map distance to the corresponding real distance. Since 1 unit on the map represents 1,000,000 units in real life, we can multiply the map distance by 1,000,000 to get the real distance:
Real distance = 35 mm x 1,000,000 = 35,000,000 mm
Now we can use the formula to find the real distance between the two points:
Real distance = 35,000,000 mm / 1,000,000 = 35 km
Learn more about map scale here:
https://brainly.com/question/105644
#SPJ11
the most severe mass extinction during the past 500 million years occurred at the end of which geological period?'
the Permian period
Explanation:First 500 million years is wrong because God Created the World and it wasn't 500 million years ago!
a scientist tests how quickly each of the following substances will settle out of water. to measure this property, she separately tests each of the following by placing 100 grams of the substance and 500 milliliters of water into a 1-liter jar with a tight lid. she then shakes the jar violently for 1 minute and places the jar on the lab table. which one of the following would settle the fastest, creating the clearest water in the fastest amount of time?
Out of the substances mentioned, sand would settle the fastest and create the clearest water in the shortest amount of time.
To test the property of how quickly the given substances will settle out of water, the scientist will put 100 grams of each substance in a 1-liter jar with 500 ml of water with a tight lid. The jar is then shaken violently for 1 minute, and the substance is left to settle on the lab table. The clearest water would settle the fastest and create the clearest water in the shortest amount of time.
Sedimentation is the process of allowing particulate matter to settle out of water or wastewater under the action of gravity. In addition, gravity sedimentation is an effective and simple process for clarifying water or wastewater.
Substances that are heavier than water or wastewater tend to settle more quickly because of gravity. As a result, the jar's content will settle at the bottom, resulting in a clear layer at the top, which is water. The substances in order of settling rate are: Sand>Clay>Silt>Sugar.
Water has a density of 1 g/mL, and the other materials have a higher density than water, so the materials will sink to the bottom of the jar, resulting in clear water at the top.
For more such questions on sand, click on:
https://brainly.com/question/13091529
#SPJ11
The probable question may be:
a scientist tests how quickly each of the following substances ( Silt, Sugar, Clay, Sand) will settle out of water. to measure this property, she separately tests each of the following by placing 100 grams of the substance and 500 milliliters of water into a 1-liter jar with a tight lid. she then shakes the jar violently for 1 minute and places the jar on the lab table. which one of the following would settle the fastest, creating the clearest water in the fastest amount of time?
What sea surrounds the Italian Peninsula?
A. The Black Sea
B. The Caspian Sea
C. The Mediterranean Sea
Answer: C. Mediterranean
Explanation:
temperature, pressure, wind and moisture are measured through the depth of the troposphere by what instrument? group of answer choices rawinsonde doppler radar goes satellite
Temperature, pressure, wind and moisture are measured through the depth of the troposphere using Rawinsonde instrument.
Rawinsonde is an instrument used to measure various meteorological parameters, including wind, temperature, and humidity. Rawinsonde is a balloon-borne instrument that is released into the air, and it sends back data as it rises. The balloon can rise to an altitude of around 100,000 feet before bursting, and the Rawinsonde instrument falls back to Earth. The data from the instrument are used to create a sounding, which is a profile of the atmosphere's temperature, pressure, and humidity as a function of altitude. The troposphere is the region of the atmosphere that is closest to the surface. It extends from the Earth's surface up to about 7-20 kilometers, depending on the latitude. The Rawinsonde instrument is used to measure the various meteorological parameters in the troposphere.
The Rawinsonde instrument consists of a weather balloon that is filled with helium gas. The balloon is released from the surface, and it rises through the atmosphere. As the balloon rises, the Rawinsonde instrument collects data on various meteorological parameters, including wind, temperature, and humidity. The data collected from the instrument are used to create a sounding, which is a profile of the atmosphere's temperature, pressure, and humidity as a function of altitude.
Learn more about troposphere measuring instrument https://brainly.com/question/30624338
#SPJ11
during the overnight hours on a mountainside, when temperatures are dropping, how does the wind usually respond?
During the overnight hours on a mountainside, when temperatures are dropping, the wind usually responds by blowing downslope.
An inversion is formed during the night when temperatures drop, causing the cold air to flow down the mountain. This is known as a katabatic wind.
The wind usually responds by blowing downslope, which is referred to as the katabatic wind. The mountain valley can get very cold during these windy nights, which is why katabatic winds are common in mountainous regions.
Mountainous areas experience katabatic winds, which are downslope winds caused by the cooling of a mass of air on high terrain. Katabatic winds occur when dense, cold air flows downhill because it is denser than the surrounding warmer air.
The phenomenon can last for a few minutes or a few hours, depending on how long the cold air takes to warm up.
For such more question on temperature:
https://brainly.com/question/29332171
#SPJ11
which type of rock is the easiest to date radiometrically? a. metamorphic b. sedimentary c. all three types of rock are equally easy to date d. igneous
Answer: Igneous
Explanation:
In igneous rocks, all the crystals are roughly the same age, having solidified at about the same time, therefore it is easier to date this type of rock.
what is the primary impetus for understanding the circulation systems of estuaries in order to keep them healthy and productive?
The primary impetus for understanding the circulation systems of estuaries in order to keep them healthy and productive is the maintenance of ecological balance.
What are estuaries?An estuary is a coastal body of water where freshwater from rivers and streams mixes with saltwater from the ocean. Estuaries, which are semi-enclosed water bodies with access to the sea and significant freshwater inputs, are important for various reasons, including biological productivity and biodiversity, shoreline stabilization, water quality, and commercial and recreational fisheries.A primary impetus for understanding the circulation systems of estuaries is the maintenance of ecological balance.
Understanding the circulation systems of estuaries aids in the identification and quantification of interactions between the ecosystem's components, such as how dissolved materials, organisms, and particulate matter move through an estuary, how pollutants affect the water and biota, and how freshwater and saltwater interact. These interactions influence the system's productivity and the organisms that inhabit it.
Based on the aforementioned facts, the correct answer is: The primary impetus for understanding the circulation systems of estuaries in order to keep them healthy and productive is the maintenance of ecological balance.
To know more about ecological balance refer here:
https://brainly.com/question/28098744
#SPJ11
where are the headwaters of the mississippi river? view available hint(s)for part a where are the headwaters of the mississippi river? gulf of mexico missouri river rocky mountains appalachian mountains northern minnesota
The headwaters of the Mississippi River are located in northern Minnesota.
The Mississippi River is one of the longest and largest rivers in the United States. It flows 2,350 miles from its headwaters in Minnesota to the Gulf of Mexico. The river is known for its important role in American history, as well as its economic and ecological significance. Headwaters are the sources of a river or stream. The headwaters of the Mississippi River are located in Itasca State Park, Minnesota.
The river then flows southward through the Midwest, eventually merging with the Ohio River and the Missouri River to form the Lower Mississippi River. The Mississippi River is an important transportation route, providing access to major cities such as St. Louis, Memphis, and New Orleans. It also provides a habitat for a wide variety of plants and animals, including fish, birds, and mammals.
Learn more about Headwaters of Mississippi river :- https://brainly.com/question/13932268
#SPJ11
how does the field map made using the small compass compare to the corresponding one made by using the iron filings? should they be the same?
The only difference is that iron filings will be used to get the direction of the magnetic field lines of the magnet on the paper.
The field map made using the small compass can be compared to the corresponding one made by using iron filings on several grounds.
In general, they are supposed to give you identical results with some slight differences. Field map with small compasses: The following steps should be followed to prepare the field map with a small compass: Take a piece of white paper and place it on the ground .Place the magnet on the paper and mark its position. Carefully place the compass near the magnet, and gently move it until the needle points to the N-pole of the magnet.
At the point where the needle touches the paper, mark the N-pole and the position of the compass. Carefully rotate the compass to different locations along the circumference of the magnet, and at each position where the needle stops, draw an arrow in the direction of the needle. It would be a circle made up of such arrows. Iron filings are used to make field maps in the same way as with a small compass.
The only difference is that iron filings will be used to get the direction of the magnetic field lines of the magnet on the paper. Iron filings are not directional, and they are magnetized to a certain extent, making them less sensitive to external factors that may interfere with their magnetization.
To know more about iron filings refer to:
https://brainly.com/question/8822403
#SPJ11
based upon your analysis, most shield volcanoes form in which tectonic setting? choose all that apply. group of answer choices divergent boundaries oceanic-continental convergent boundaries mantle plumes (hotspots) transform boundaries continental-continental convergent boundaries
Most shield volcanoes form in the tectonic setting of mantle plumes (hotspots). Therefore the correct option is option D.
A shield volcano is a type of volcano that has a wide, gently sloping cone shape formed by the eruption of fluid lava flows. Shield volcanoes are the most extensive volcanic structures, with some covering hundreds of square miles and reaching heights of over 10,000 feet.
Their lava flows can be up to 50 km (31 miles) long, and their craters can be up to 3 km (2 miles) wide. They are composed mainly of basalt, a dark, dense, igneous rock abundant in iron and magnesium. It forms from a shield volcano's relatively low-viscosity basaltic lava flows.
The rising rock forms a hotspot, which produces volcanic activity at the earth's surface. Most hotspots occur far from plate boundaries, and they are responsible for the creation of oceanic islands, such as Hawaii and Iceland. Therefore the correct option is option D.
For such more question on volcanoes:
https://brainly.com/question/440765
#SPJ11
The following question may be like this:
Based upon your analysis, most shield volcanoes form in which tectonic setting? choose all that apply. group of answer choices
divergent boundaries
oceanic-continental
convergent boundaries
mantle plumes (hotspots)
transform boundaries
which of the following are types of pyroclastic debris? choose one or more: a. lapilli b. lava c. blocks d. ash e. magma f. gas g. lahar
The types of pyroclastic debris include the following: a) lapilli, d) ash, c) blocks, and g) lahars.
What are Types of Pyroclastic Debris?Lapilli are small fragments of volcanic debris with a size range between 2 mm to 64 mm. Ash is fine volcanic debris with a size less than 2 mm. Blocks are large, solid pieces of volcanic material that can be greater than 64 mm.
Lahars are mudflows composed of volcanic material mixed with water. Lava, magma, and gas are not considered pyroclastic debris since they are not ejected explosively during volcanic eruptions but rather flow out of the volcano in a more controlled manner.
Learn more about pyroclastic debris on:
https://brainly.com/question/29441395
#SPJ1
__________ __________ are steep, high walls built along the coast to prevent beaches from eroding. They are usually made out of concrete.
"Sea walls are steep, high walls built along the coast to prevent beaches from eroding. They are usually made out of concrete."
Sea walls are human-made structures built along the shoreline to protect coastal areas from the effects of erosion and flooding. These walls are typically constructed using durable materials such as concrete, and they are designed to absorb the impact of waves and tidal forces.
By providing a physical barrier between the ocean and the land, sea walls can prevent erosion, protect property and infrastructure, and maintain the integrity of coastal ecosystems. However, some experts have raised concerns that sea walls can also have unintended consequences, such as disrupting natural coastal processes, altering the local hydrology, and exacerbating erosion in adjacent areas.
Learn more about Sea walls https://brainly.com/question/11722850
#SPJ11
which of the following fundamental properties of mars could explain why it once had a global magnetic field but later lost it? group of answer choices its small size its larger distance than earth from the sun a rotation rate that is slightly slower than earth's its axial tilt
The fundamental property of Mars that explains why it once had a global magnetic field but later lost it is its small size. Therefore the correct option is option A.
Mars lost its magnetic field and its atmosphere over time because its core cooled and solidified, according to NASA. The Mars crust, which is not divided into tectonic plates like the Earth's, is an average of 50 kilometers thicker than the Earth's crust.
The processes responsible for creating the Earth's magnetic field are not present on Mars, according to scientists. As a result, Mars is unable to generate the long-lasting magnetic field that shields its atmosphere from the solar wind.
Mars once had a global magnetic field, but it has since lost it due to the planet's small size, which means that its core cooled more quickly than the Earth's.
As a result, Mars has a partially cooled core that no longer produces a magnetic field, making it more vulnerable to the harsh space environment. The statement "its small size" is the correct answer.
For such more question on global:
https://brainly.com/question/28416579
#SPJ11
The following question may be like this:
which of the following fundamental properties of mars could explain why it once had a global magnetic field but later lost it? group of answer choices
its small size
its larger distance than earth from the sun
a rotation rate that is slightly slower than earth's its axial tilt
why does the way the different layers of the atmosphere are warming prove anthropogenic global warming?
The way the different layers of the atmosphere are warming proves anthropogenic global warming because of the significant increase in greenhouse gas concentrations, which are mainly caused by human activities.
Anthropogenic global warming refers to the gradual increase in Earth's temperature due to human activities, including the burning of fossil fuels and deforestation.
There are various ways in which the different layers of the atmosphere are warming that demonstrate anthropogenic global warming. The stratosphere, for example, is cooling, while the troposphere is warming.
Greenhouse gases, such as carbon dioxide and methane, are mainly responsible for the warming of the troposphere. They trap heat energy and prevent it from escaping into space. The increase in greenhouse gas concentrations due to human activities is causing the planet to warm up.
The most abundant greenhouse gas in the atmosphere is carbon dioxide, and it has increased by more than 40% since the industrial revolution began. The human activities responsible for the increase include the burning of fossil fuels and deforestation. These activities have caused the release of carbon dioxide into the atmosphere, resulting in the warming of the planet. The warming is not evenly distributed across the atmosphere, with the troposphere warming faster than other layers.
Anthropogenic global warming is a significant problem that must be addressed. The consequences of global warming include rising sea levels, increased frequency of extreme weather events, and more frequent droughts. It is essential to reduce greenhouse gas emissions to prevent further warming of the planet.
To know more about "global warming": https://brainly.com/question/3223175
#SPJ11
in traveling from the equator towards the north pole, seasonal variation in temperature tends to
Seasonal variation in temperature occurs when the Earth's axis is tilted towards or away from the sun. When the axis is tilted towards the sun, the hemisphere is experiencing summer and has more direct sunlight, resulting in warmer temperatures.
Conversely, when the axis is tilted away from the sun, the hemisphere is experiencing winter and has less direct sunlight, resulting in colder temperatures.
As you travel from the equator towards the North Pole, the angle of sunlight decreases. This means that the intensity of sunlight decreases and there is a decrease in temperature. This decrease in temperature is greatest near the poles due to the increased distance from the sun.
The amount of seasonal variation also depends on the latitude of the location and the amount of landmass present. Locations near the poles have greater seasonal variation than locations near the equator due to the greater angle of sunlight. In addition, landmasses absorb more heat than water and therefore have higher seasonal variations.
The temperature near the equator is more constant than the temperature near the poles due to the direct sunlight received by the equator. However, the temperature near the equator still changes throughout the year. During the summer months, the temperature near the equator can be higher due to the increased intensity of sunlight.
In conclusion, as you travel from the equator towards the North Pole, seasonal variation in temperature tends to increase due to the decrease in the angle of sunlight, the amount of landmass present, and the distance from the sun. The amount of seasonal variation is greatest near the poles due to the increased distance from the sun.
To know more about Seasonal variation here
https://brainly.com/question/30697387
#SPJ11
which two factors cause upwelling? responses prevailing winds and daily tides prevailing winds and daily tides the coriolis effect and changes in salinity the coriolis effect and changes in salinity differences in density and daily tides differences in density and daily tides prevailing winds and the coriolis effect
Prevailing winds and daily tides are the two main factors that cause upwelling.
Prevailing winds are winds that consistently blow from the same direction and can cause the water to be displaced along the shoreline, resulting in upwelling. Daily tides are the periodic rise and fall of the ocean’s surface, which can also lead to upwelling.
The Coriolis effect, which is an inertial force, causes a deflection in the paths of moving objects and is an additional factor that can cause upwelling. Changes in salinity can also influence the density of the water and can cause upwelling.
Lastly, differences in density between two different water masses can also be a factor in upwelling. When the water has different densities, the denser water will sink and the less dense water will rise, resulting in upwelling.
In conclusion, the two main factors that cause upwelling are prevailing winds and daily tides, but other factors such as the Coriolis effect, changes in salinity, and differences in density also play a role.
For more such questions on Upwelling.
https://brainly.com/question/12026041#
#SPJ11
Answer: THE ANSWER IS C)
prevailing winds and daily tides
Explanation: I GOT A 100 ON THE QUIZ
Explain why the largest part of East Africa is covered by plateau
The area is a component of a tectonic plate that started to raise around 30 million years ago, creating the East African Plateau.
East Africa's geological past has left it with a mostly plateau-covered surface. Throughout millions of years, the immense expanses of volcanic rocks and sediments that make up the plateau have accumulated.
The significant volcanic activity resulted in the production of volcanic rocks as a result of the rupture process that started when the African plate started to split from the Arabian plate.
The distinctively flat surface we currently observe is a result of erosion caused by geological elements like rivers as the plateau rises. In plateaus are found several of Africa's tallest mountains.
Learn more about the African Plateau at
https://brainly.com/question/534185
#SPJ4
when we see venus in its full phase, what phase would earth be in as seen by a hypothetical venetian? group of answer choices first quarter new waning crescent full third quarter
If we see Venus in its full phase, Earth would appear as a new phase to a hypothetical Venetian. The answer is first quarter.
What is the meaning of the term "full phase"?
The term "full phase" refers to the time when the planet is positioned behind the Sun in the Earth-Sun-planet alignment. This alignment causes the planet to appear fully illuminated from Earth’s point of view because it reflects all of the sunlight that is falling on its surface.
The orbital path of Venus is smaller than that of Earth because it is closer to the Sun. When Venus is on the far side of the Sun (as viewed from Earth), we can see its full illuminated face.
At that moment, the Sun-Earth-Venus angle is 180 degrees, and Venus is on the opposite side of the Sun from the Earth.
Hence, when we see Venus in its full phase, Earth would appear as a new phase to a hypothetical Venetian. The answer is first quarter.
To know more about full phase, refer here:
https://brainly.com/question/30510107
#SPJ11
if the rate of heat transport from the mixed layer to the deep ocean increases, what happens to the climate? explain why?
If the rate of heat transport from the mixed layer to the deep ocean increases heat will remain in the ocean's uppermost layers.
The sea and air are continually in a course of energy trade (heat move) as the sea bodies fills in as intensity trap which retains the bigger part of the Sun's radiation, which is circulated to encompassing regions as daylight dies down, with the sea water likewise losing dampness because of vanishing.
Topical regions, which are very close to the ocean, experience the greatest amount of evaporation and consequently the greatest amount of precipitation. thereby determining the climate of the tropics as a whole.
Learn about heat transfer
https://brainly.com/question/18805369
#SPJ4
compaction and cementation are two common processes of erosion. transportation. deposition. lithification.
Compaction and cementation are two processes involved in lithification, which is the process of turning sediment into sedimentary rock. Compaction is the process by which sediment grains are pressed together due to the weight of overlying material.
The overlying material can be either water or other sediment, and compaction is the main process that creates sedimentary rocks. Cementation is the process by which sediment grains become bound together by the precipitation of mineral cement.
This cement is usually some form of calcium carbonate, such as calcite, and it helps to solidify and bind sediment grains together. Compaction and cementation are important processes for creating sedimentary rocks, and they occur along with other processes such as erosion, transportation, and deposition. Together, these processes are responsible for the formation of sedimentary rocks, which are some of the most common rocks found on Earth.
Know more about lithification here
https://brainly.com/question/29631160#
#SPJ11
where was the epicenter of the 1964 alaska earthquake?
The epicenter of the 1964 Alaska earthquake was located in the Prince William Sound region of Alaska, about 75 miles (120 kilometers) east of Anchorage.
The earthquake, also known as the Great Alaska Earthquake, occurred on March 27, 1964, and had a magnitude of 9.2, making it the second-largest earthquake ever recorded. The earthquake caused widespread damage throughout south-central Alaska, triggered landslides and tsunamis, and resulted in more than 130 deaths.
The epicenter of an earthquake is the point on the Earth's surface directly above the hypocenter or focus, which is the point within the Earth where the earthquake originates. When an earthquake occurs, the energy is released from the focus, and the seismic waves radiate out in all directions from that point.
To learn more about earthquakes here
https://brainly.com/question/248561
#SPJ4
a climograph which shows high rainfall the summer and warm temperatures year-round, is which climate type?
Create a climograph, a graphical representation of the statistical climate values of mean monthly temperature and average monthly precipitation.
What kind of climate is the climograph supposed to depict?A climograph is a graphic depiction of a place's fundamental climate. Data for two variables—monthly average temperature and monthly average precipitation—are shown on climatographs.
What are the climatic parameters that cause locations that are close to the equator to suffer high temperatures and heavy rainfall throughout the year?Tropical Rain Forest Regions refers to these equatorial regions. Because of the year-round high humidity and persistent high temperatures in this area, convectional rainfall typically occurs in the afternoon practically every day.
To know more about Climate type visit:-
https://brainly.com/question/18827663
#SPJ1
pls help someone help pls Q2-Q5
A solar cell is an electronic device that converts sunlight into electricity.
2. A. True
B. False
C. False
D. False
E. False
F. True
3. a. The three main advantages of solar power are:
It's a renewable energy source.It doesn't produce greenhouse gases or pollution.It can save money on electricity bills.b. Some disadvantages of solar power are:
It can be expensive to install.It doesn't work at night or in cloudy weather.It takes up space and can be visually unappealing.4. a. Africa has the most potential for solar power because it receives the most sunlight.
b. Greenland has the least potential for solar power because it has long periods of darkness during the year and very low levels of solar radiation.
5. Solar power can be especially helpful in poorer countries because it can provide electricity to remote areas that might not have access to traditional power sources. It can also be more affordable and sustainable than other options.
6.a. An invention that uses solar power for homes in poorer countries could be a portable solar-powered generator. It could be used to power small appliances like lights, phones, or radios.
c. Name: SunGen
Logo: A bright sun with rays emanating from it, with the word "SunGen" written in bold letters underneath.
What is the solar power about?Solar power is a renewable and clean energy source that is derived from the sun's radiation. It is harnessed through the use of photovoltaic (PV) cells or solar panels, which convert sunlight into electricity. Solar power has a variety of applications, including:
Electricity generation: Solar panels can be used to generate electricity for homes, businesses, and even entire communities.Water heating: Solar water heaters use sunlight to heat water, which can be used for domestic or industrial purposes.Lastly, Transportation: Solar-powered vehicles, such as cars, boats, and planes, are becoming more common as technology advances.
Learn more about solar power from
https://brainly.com/question/17711999
#SPJ1
See text below
Your turn
1 What is a solar cell? Answer, then check the glossary! 2 Here are six statements about solar power.
For each one, decide whether it's true, or false.
A With solar cells, a home can provide its own electricity. B You must live near a city to use solar power.
C Solar power is used only in rich countries. D Solar power increases global warming. E You can't make solar power at night.
F With solar power, the source of the energy is free.
3 a Which do you think are the three main advantages of solar power? List them in order of importance. b Now see if you can think of any disadvantages.
4 a Which continent has most potential for solar power? How did you decide?
b Which of these countries has least potential for solar power: Greenland, Spain, or Mali? (Pages 140-141.) Try to explain why, very clearly.
5 Solar power is used in many homes in the UK. But it helps many people in poorer countries even more. Explain why.
6 You are an inventor. And here's a challenge.
a Invent something that uses solar power. Say for tourists, or mums with toddlers, or homes in poorer countries.
b Draw a labelled sketch of it.
C Then make up a name and a logo for it.
consider layers 1 and 2. by what relative dating principle do we know that these layers were at one time continuous?
The relative dating principle that allows us to determine that layers 1 and 2 were at one time continuous is the Principle of Superposition.
This principle states that the oldest layer of sedimentary rock is on the bottom and the youngest layer is on the top, with each layer in between being of a slightly different age. In terms of layers 1 and 2, this means that at one time, layer 1 was on the bottom and layer 2 was on the top.
Over time, the layers may have been disturbed or eroded, creating gaps where the layers are now separated, but we can still use the Principle of Superposition to determine that the layers were at one time continuous.
Know more about Superposition here:-
https://brainly.com/question/2069576#
#SPJ11
what are the two karst types that can be found in florida? group of answer choices gypsum volcanic carbonate erosional
The two main types of karst found in Florida are carbonate and erosional karst. Carbonate karst is created when dissolved carbonate rocks like limestone and dolomite are dissolved by water. This leaves behind sinkholes, caves, and other features such as fissures and depressions.
Erosional karst is formed when water erodes the surface of rocks, causing them to dissolve and create a more porous landscape with features such as towers, pillars, and canyons.
Carbonate karst is the most common type of karst in Florida, and is found in areas where limestone or dolomite are exposed at or near the surface. It is often characterized by sinkholes, caves, and other features. Erosional karst is less common, and is found in areas where rocks are more resistant to erosion and water has less ability to dissolve the rocks. It is often characterized by towers, pillars, and canyons.
To learn more about karst here:
https://brainly.com/question/26696246#
#SPJ11
in the picture above, when dr. alley slices his finger through the sand, he is recreating on a smaller scale what type of geologic process?
Dr. Alley is recreating the process of sedimentation on a smaller scale. Sedimentation is the process by which solid particles settle out of a liquid or a gas. The particles settle due to gravity and settle out of the medium into layers.
These layers are then compressed and cemented together to form sedimentary rocks. In the picture, Dr. Alley is slicing his finger through the sand and the particles settle in layers. This process of sedimentation can occur in a variety of geological settings, including in the ocean and on land. Sedimentation can also be caused by erosion, where material is removed from one location and sediment elsewhere. This is also happening in the picture, as the sand is settling in layers from Dr. Alley’s slicing. Sedimentation is an important process in the rock cycle, as it is how sedimentary rocks are formed.
Know more about sedimentation here:
https://brainly.com/question/29768268
#SPJ11
this is a map of paraguay. based on this map, which geographical feature could negatively affect international trade?
Based on the given map of Paraguay, the geographical feature that could negatively affect international trade is the lack of a seaport.
Paraguay is a landlocked country in South America, and it is bordered by Argentina, Bolivia, and Brazil. It is the only country in South America that does not have a seaport. This lack of access to the sea can make it more difficult and expensive for Paraguay to trade goods internationally.The landlocked status of Paraguay can increase the cost of trading goods internationally. It may require more transportation costs, which may result in more time consumption and additional costs.
Furthermore, the lack of seaport can make it harder for Paraguay to receive goods from other nations. The absence of a seaport can cause additional difficulties for Paraguay in exporting and importing goods. In Paraguay, one of the most essential ways to transport goods is by using the Paraná and Paraguay rivers. However, the waters of the Paraná and Paraguay rivers can be very shallow at times, which means that transportation via water is often only possible during particular seasons.
To know more about international trade click on below link:
https://brainly.com/question/20492108#
#SPJ11
A place that receives less than __________ of rain per year is considered a desert.
The place that receives less than 10 inches of rain per year is considered a desert.
Deserts are vast regions that are characterized by extremely arid conditions with an absence of vegetation and wildlife. They usually receive less than 10 inches of rainfall per year, which is one of the main reasons for their harsh environmental conditions. However, there are some deserts such as the Atacama Desert in South America that receive no rainfall. Deserts are of different types, namely hot and dry, cold, coastal, and semiarid deserts. The hot and dry desert is the most commonly known and is characterized by high daytime temperatures and low nighttime temperatures.
Apart from low rainfall, deserts are also known for their unique flora and fauna. Insects and reptiles dominate the fauna, while cacti, shrubs, and other unique vegetation cover the land. Despite their harsh environmental conditions, some of the world's most exciting landmarks are located in the desert.
Learn more about Desert here: https://brainly.com/question/24323334
#SPJ11
More slaves left from Sierra Leone than West Central Africa
True
False
Answer: Its TRUE
Explanation: Because 12.5 million slaves left Sierra Leone
which of the following temperature regimes would be likely to have the largest annual temperature range? mid-latitude west coast tropical west coast subarctic continental mediterranean equatorial
The subarctic continental temperature regime would be likely to have the largest annual temperature range Therefore the correct option is option C.
Subarctic continental climate is a type of climate that is defined by its temperature regime, which is characterized by cold winters and warm summers. The average temperature for the warmest month of the year is below 50°F in the subarctic continental climate, while the average temperature for the coldest month of the year is below -22°F.
This type of climate is found in regions such as Siberia and Alaska, where temperatures can get extremely cold in the winter.The temperature range between the warmest and coldest months is typically the largest in the subarctic continental climate. Therefore, the correct option is option C.
For such more question on continental:
https://brainly.com/question/26007131
#SPJ11
The following question may be like this:
content loaded
which of the following temperature regimes would be likely to have the largest annual temperature range?
mid-latitude west coast tropical west coast subarctic continental mediterranean equatorial