The particle's speed after one second, rounded to three decimal places, is approximately 15.345 feet per second.
To find the particle's speed after one second, we need to differentiate the position function, s(t), with respect to time, t, and then evaluate it at t = 1.
Given: s(t) = (t²+8) e^t/3
To differentiate this function, we can use the product rule and the chain rule. Let's calculate it step by step:
Step 1: Apply the product rule to (t²+8) and e^t/3.
d/dt [(t²+8) e^t/3] = (t²+8) * d/dt [e^t/3] + e^t/3 * d/dt [t²+8]
Step 2: Differentiate e^t/3 using the chain rule.
d/dt [e^t/3] = (1/3) * e^t/3 * d/dt [t]
Step 3: Differentiate t²+8 with respect to t.
d/dt [t²+8] = 2t
Step 4: Substitute the derivatives back into the expression.
d/dt [(t²+8) e^t/3] = (t²+8) * (1/3) * e^t/3 + e^t/3 * 2t
Step 5: Simplify the expression.
d/dt [(t²+8) e^t/3] = (t²+8) * e^t/3 + 2t * e^t/3
Step 6: Evaluate the derivative at t = 1.
d/dt [(t²+8) e^t/3] evaluated at t = 1:
= (1²+8) * e^1/3 + 2(1) * e^1/3
= (9) * e^1/3 + 2 * e^1/3
= 9e^1/3 + 2e^1/3
The particle's speed after one second is given by the magnitude of the derivative:
Speed = |d/dt [(t²+8) e^t/3] evaluated at t = 1|
= |9e^1/3 + 2e^1/3|
Now, let's calculate the numerical value of the speed rounded to three decimal places:
Speed ≈ |9e^1/3 + 2e^1/3| ≈ |9(1.395) + 2(1.395)| ≈ |12.555 + 2.790| ≈ |15.345| ≈ 15.345
The particle's speed after one second is therefore 15.345 feet per second, rounded to three decimal places.
Learn more about function
https://brainly.com/question/30721594
#SPJ11
Q: Why we use this numerical number (IV) here for VO2 vanadium (IV) oxide?
is this because vanadium has a positive 4 charge (+4) in here?? If yes, then why we don't say Aluminum (III) oxide for Al2O3? we have possitive 3 charge for Al then why saying Aluminum (III) oxide is wrong?
Yes, you are correct that we use the numerical number (IV) for VO2 because vanadium has a positive 4 charge (+4) in this case.
This numerical value of 4 indicates the oxidation state of the vanadium ion. Vanadium oxide has a variety of oxidation states, ranging from V2O5, VO2, and VO to V3O7, with vanadium in the oxidation states +5, +4, +3, and +2. The use of these numbers indicates how many electrons an element has gained or lost. For example, when vanadium gains electrons, its oxidation state decreases, while when it loses electrons, its oxidation state increases. When vanadium gains four electrons, it becomes V4+ (i.e. vanadium(IV)), indicating that it has four fewer electrons than a neutral atom of vanadium. Hence, the correct chemical formula of VO2 is vanadium(IV) oxide.
On the other hand, it is not wrong to say aluminum(III) oxide for Al2O3. This is because the oxidation state of aluminum in Al2O3 is indeed +3. The oxidation state of aluminum is determined based on the overall charge of Al2O3, which is zero. Since oxygen has an oxidation state of -2, two oxygen atoms combine to form a total of -4. Therefore, for the overall charge to be zero, the two aluminum atoms in Al2O3 must each have an oxidation state of +3. The chemical formula of Al2O3 is aluminum(III) oxide.Hence, both vanadium(IV) oxide (VO2) and aluminum(III) oxide (Al2O3) are correct ways of naming the chemical compounds.
To know more about vanadium visit:-
https://brainly.com/question/25237156
#SPJ11
Determine the moment of inertia ly (in.4) of the shaded area about the y-axis. Given: x = 4 in. y = 9 in. z = 4 in. Type your answer in two (2) decimal places only without the unit. -3 in.-- X- in.X 2 in. y Z X
The moment of inertia of the shaded area about the y-axis is [tex]9 in^4[/tex].
To determine the moment of inertia, we need to calculate the integral of the area multiplied by the square of its distance from the y-axis. In this case, we are given the dimensions of the shaded area and the coordinates of its centroid (x, y, z).
First, we need to find the equation that represents the shaded area. From the given information, we can see that the shaded area is a rectangular shape with a length of 2 inches along the y-axis, a width of 4 inches along the x-axis, and a height of 3 inches along the z-axis.
The moment of inertia of a rectangular shape about the y-axis can be calculated using the following formula: [tex]I_y = (b * h^3) / 12[/tex], where b is the base (width) of the rectangle and h is its height.
In this case, b = 4 inches and h = 3 inches. Plugging these values into the formula, we get:
[tex]I_y = (4 * 3^3) / 12 = (4 * 27) / 12 = 108 / 12 = 9[/tex]
So, the moment of inertia of the shaded area about the y-axis is [tex]9 in^4[/tex].
Learn more about moment of inertia from this link:
https://brainly.com/question/14460640
#SPJ11
Suppose we have 24 floors & each floor consists of 4 flats,
2 of them having 3 bedrooms
2 of them having 2 bedrooms.
As a rule of thumb we take 2 persons/bed room.
The daily water requirement is between 50 gal/ day /person (Residential Building),
Solve: The daily water requirement for the whole building
The total water required for the whole building is:
2 × 96 × 2 × 2 + 3 × 144 × 2 × 2 = 1,152 + 1,728
= 2,880 gallons/day.
Given that there are 24 floors and each floor consists of 4 flats,
2 of which have 3 bedrooms and 2 of which have 2 bedrooms.
Therefore, the total number of flats in the building is 24 × 4 = 96.
Out of these, 2 × 2 × 24 = 96 flats have 2 bedrooms, and
2 × 3 × 24 = 144 flats have 3 bedrooms.
Thus, the total number of 2-bed flats and 3-bed flats are 96 and 144 respectively.
Therefore, the total number of bedrooms in the building is
2 × 96 + 3 × 144 = 576.
Out of these, the number of beds is 2 × 96 × 2 + 3 × 144 × 2 = 864.
Therefore, the total water required for the whole building is:
2 × 96 × 2 × 2 + 3 × 144 × 2 × 2 = 1,152 + 1,728 = 2,880 gallons/day.
To know more about water, visit:
https://brainly.com/question/28465561
#SPJ11
What is the length of the unknown leg in a right triangle if √23 yd is the leg A and
√87 yd is the hypotenuse C?
The length of the base is 8 units if the length of the hypotenuse is √87 yd and the length of the opposite side is √23 yd.
What is a right-angle triangle?It is a triangle in which one of the angles is 90 degrees and the other two are sharp angles. The sides of a right-angled triangle are known as the hypotenuse, perpendicular, and base.
We have a right-angle triangle in which:
The length of the hypotenuse = √87 ydThe length of the opposite side = √23 ydAccording to the Pythagoras theorem:
[tex]\bold{hypotenuse^2 = opposite^2 + base^2}[/tex]
[tex]\sf (\sqrt{87} )^2 = (\sqrt{23} )^2 + \text{base}^2[/tex]
[tex]\text{base} = \sqrt{164}[/tex]
[tex]\text{base}=\bold{8 \ units}[/tex]
Therefore, the length of the base is 8 units if the length of the hypotenuse is √87 yd and the length of the opposite side is √23 yd.
To know more about the right-angle triangle, refer to the link below.
https://brainly.com/question/31885128
Calculate the maximum length of a train which could be towed by a 4500 HP locomotive at speed 60 km/hr, if you know that: 180 Tons Weight of locomotive (all wheels driving) Length of locomotive = 20 m Length of each towed wagon = 13 m Weight of each towed wagon = 25 Tons empty and 45 Tons loaded Wind speed = 30 Km/hr Maximum upgrade slope = 9%0 Straight railway (No horizontal curves) For this railway design and provide detailing for a vertical curve which connects +9%o to -8% given that elevation of VPI is 20 m.
The maximum length of the train that can be towed by a 4500 HP locomotive at a speed of 60 km/hr is approximately 332 meters.
To calculate the maximum length of the train that can be towed by a 4500 HP locomotive, we need to consider several factors such as the power of the locomotive, the weight of the locomotive, the weight of each towed wagon, the wind speed, the maximum upgrade slope, and the design of a vertical curve.
First, let's determine the tractive effort of the locomotive:
Tractive Effort = (4500 HP * 0.7457) / Speed (in mph)
= (4500 * 0.7457) / (60 * 0.6214)
≈ 1122.59 lb
Next, let's calculate the total weight that the locomotive can pull, considering the maximum tractive effort:
Total Weight = Tractive Effort / (1 - (Wind Speed / Speed))
= 1122.59 / (1 - (30 / 60))
≈ 2245.18 lb
Now, let's calculate the maximum number of wagons that can be towed based on the weight of each wagon:
Weight of each loaded wagon = 45 Tons = 90,000 lb
Maximum Number of Wagons = Total Weight / Weight of each loaded wagon
≈ 24.94 wagons
Since we cannot have a fraction of a wagon, the maximum number of wagons that can be towed is 24 wagons.
Finally, let's calculate the maximum length of the train:
Length of locomotive = 20 m
Length of each towed wagon = 13 m
Maximum Length of Train = Length of locomotive + (Length of each towed wagon * Maximum Number of Wagons)
= 20 + (13 * 24)
= 332 meters
To know more about length:
https://brainly.com/question/33565243
#SPJ4
Learning Goal: To be able to set up and analyze the free-body diagrams and equations of motion for a system of particles. Consider the mass and pulley system shown. Mass m1=31 kg and mass m2=11 kg. The angle of the inclined plane is given, and the coefficient of kinetic friction between mass m2 and the inclined plane is μk=0.19. Assume the pulleys are massless and frictionless. (Eigure 1) Figure 1 of 1 Part A - Finding the acceleration of the mass on the inclined plane What is the acceleration of mass m2 on the inclined plane? Take positive acceleration to be up the ramp. Express your answer to three significant figures and include the appropriate units. Part B - Finding the speed of the mass moving up the ramp after a given time If the system is released from rest, what is the speed of mass m2 after 4 s? Express your answer to three significant figures and include the appropriate units. View Available Hints) If the system is released from rest, what is the speed of mass m2 after 4 s ? Express your answer to three significant figures and include the appropriate units. Part C - Finding the distance moved by the hanging mass When mass m2 moves a distance 2m up the ramp, how far downward does mass m1 move? Express your answer to three significant figures and include the appropriate units.
Part A - Finding the acceleration of the mass on the inclined plane: Firstly, we need to calculate the force applied by the inclined plane on m2. We know that the weight of m2 is.
W = m2g, and since the plane is inclined, only a component of this weight contributes to the force pushing the mass downwards. Thus, Fp|| is given by Fp||=m2gsinθ. Since there is kinetic friction between m2 and the plane.
We must also apply friction force on the mass, which is [tex]Ff=μkFp||=μk*m2gsinθ.[/tex]
To find the acceleration of m2, we need to sum the forces on it and then divide by its mass, that is, [tex]m2a=(m2g⋅sinθ)−(μk⋅m2g⋅cosθ)⇒a=g⋅(sinθ−μk⋅cosθ).[/tex]
Now we can substitute the values and find the answer: a=9.8(m/s^2)*(sin(30)-0.19cos(30))=2.93 m/s^2.Part B - Finding the speed of the mass moving up the ramp after a given time:
In this part, we are required to find the final speed of m2 after 4s of motion, when it started from rest.
We can use the equation of motion[tex]s=ut+1/2at^2[/tex] to find the displacement of m2 in these 4s. The initial velocity u is zero since the mass starts from rest.
The acceleration a is the same as we calculated in part A, that is, a=2.93m/s^2. Therefore, the displacement in 4s is s=0+1/2(2.93)(4^2)=23.44 m.
Now we can use the equation v^2=u^2+2as to find the final velocity of m2 after this displacement. The initial velocity u is zero, so [tex]v=sqrt(2as)=sqrt(2*2.93*23.44)=10.68 m/s.[/tex]
Part C - Finding the distance moved by the hanging mass:
In this part, we are asked to find how much distance m1 moves when m2 moves up by 2m.
To know more about contributes visit:
https://brainly.com/question/31368773
#SPJ11
The mass and spring constants in a certain mass-spring-dashpot system are know, m = 1 and the damping constant b in not known. It's observed that for a certain solution r(t) of " + bx' + kx=0, x() = 0 and r() = 0, but r(t) >0 for
For the given mass-spring-dashpot system with initial conditions x(0) = 0 and r(0) = 0, the solution r(t) will be greater than zero if and only if the spring constant k is greater than zero. The value of the damping constant b does not affect whether r(t) is greater than zero or not.
The given differential equation represents a mass-spring-dashpot system, where the mass is denoted by m, the damping constant by b, and the spring constant by k. The equation is given as:
m × r''(t) + b × r'(t) + k × r(t) = 0
In this system, the initial conditions are given as x(0) = 0 and r(0) = 0. It is observed that r(t) > 0 for some values of t.
To determine the conditions for r(t) to be greater than zero, we can consider the solutions to the differential equation. The general solution to this equation can be written as:
[tex]r(t) = e^st[/tex]
where s is a complex number determined by the coefficients of the equation.
Since r(t) > 0 for some values of t, we can conclude that the real part of s must be negative. This is because the exponential term, [tex]e^st[/tex], will only be positive when the real part of s is negative.
Let's consider the given initial conditions:
x(0) = 0 implies r'(0) = 0
r(0) = 0
By substituting these values into the general solution, we get:
r(0) = [tex]e^s[/tex] × 0 = 0
From this, we can conclude that s = 0, since e⁰ = 1. Therefore, the real part of s is zero.
To find the values of b for which r(t) > 0, we need to consider the case where the real part of s is zero. In this case, the differential equation becomes:
m × r''(t) + b × r'(t) + k × r(t) = 0
By substituting r(t) = e⁰t = 1 into the equation, we get:
m × 0 + b × 0 + k × 1 = 0
This simplifies to:
k = 0
Therefore, for r(t) to be greater than zero, the spring constant k must be greater than zero.
To learn more about differential equation: https://brainly.com/question/1164377
#SPJ11
What is the measurement of each angle?
IF YOU GIVE ME THE RIGHT ANSWER, I WILL GIVE YOU BRAINLEST!!
The angle measures of the triangle by triangle sum property are 87, 25, and 68.
By the triangle sum property:
(7x-11) + (2x-3) + (5x-2) = 180
combine the like terms:
14x - 16 = 180
add 16 to both sides:
14x = 196
divide 14 into both sides:
x = 14
substitute x for each expression to find the measure of each angle:
7x - 11 = 7(14) -11 = 87
2x - 3 = 2(14) - 3 = 25
5x - 2 = 5(14) - 2 = 68
Thus, the angle measures of the triangle by triangle sum property are 87, 25, and 68.
Learn more about triangle sum property:
brainly.com/question/9695218
Answer:
7x-11=87
5x-2=68
2x-3=25
Step-by-step explanation:
The angles in a triangle all add up to 180.
So henceforth, (7x-11)+(5x-2)+(2x-3)=180
Collect the like terms
14x-16=180
Add 16 on both sides to get x on one side
14x=196
Divide both sides by 14
x=14
-
Now you just substitute x in.
7x-11=87
7*14=98 98-11=87
5x-2=68
5*14=70 70-2=68
2x-3=25
2*14=28 28-3=25
Hope this helps
Physical chemistry&thermodynamics
2. For a reaction A → B of order n, show that the half-life time is inversely proportional to [A]."-1. n1
The half-life time of a reaction A → B of order n is inversely proportional to [A] raised to the power of -1, where n is the order of the reaction.
In a reaction of order n, the rate of reaction is given by the rate equation:
rate = [tex]k[A]^n[/tex]
where k is the rate constant and [A] is the concentration of A.
The half-life of a reaction is the time it takes for the concentration of A to decrease to half its initial value. Let's denote the initial concentration of A as [A]₀ and the concentration at any time t as [A]t.
Using the rate equation, we can express the rate of reaction as:
rate = -d[A]/dt = [tex]k[A]^n[/tex]
Integrating both sides of the equation with respect to time, we get:
[tex]\int(1/[A]^n) \,d[A] = -\int k \,dt[/tex]
Integrating from [A]₀ to [A]t and from 0 to t, we have:
[tex]\int(1/[A]^n) \,d[A] = -\int k \,dt[/tex]
-ln([A]t/[A]₀)/n = -kt
Simplifying, we get:
ln([A]t/[A]₀) = kt/n
Taking the natural logarithm of both sides:
ln([A]t/[A]₀) = -kt/n
Rearranging the equation, we have:
t = -n/(k ln([A]t/[A]₀))
From this equation, we can see that the half-life time, represented by t, is inversely proportional to [A] raised to the power of -1.
Learn more about half-life time here:
https://brainly.com/question/29784353
#SPJ4
<10-Bending Stress Bending Deformation of a Straight Member Learning Goal: To analyze the deformations in a straight rod with a uniform cross-sectional area made out of a homogeneous material that is subjected to an externally applied bending moment. As shown, a cantilevered beam of length L = 5 m is fixed at A. It has a moment of M = 35.0 kNm applied at B and a diameter of d = 600 mm. A 2 of 10 Review M Mastering Engineering Mastering Computer Science: 10-Bending Stress Home Page - Summer 2022 TTU Mechanics of Solids (CE-3303... <10-Bending Stress Bending Deformation of a Straight Member 2 of 10 (> Part B - Normal strain at a point above the neutral axis A small segment of the bearn located a distance along the beam's length and having a thickness A is shown below (in profile view) in the undeformed and deformed positions, respectively. If the radius of curvature As = Ar P kso longitudinal axis longitudinal axis YAS to Ar is p = 3 m, find the normal straine at y = 230 mm above the neutral axis. Express your answer to three significant figures in units of millimeters per millimeter. ► View Available Hint(s) IVE ΑΣΦ | vec 1 ? mm/mm € = Submit Previous Answers KAx- Ar <10-Bending Stress Bending Deformation of a Straight Member Part C-Maximum normal strain The normal strain distribution of an isolated segment of the beam is shown. If c = 300 mm, y = 230 mm, and p = 3 m, what is the maximum normal strain Emax in the beam? -Ar Express your answer in millimeters per millimeters. ► View Available Hint(s) Avec n Emax = mm/mm Submit C 2 of 10 >
We find that the normal strain at a point 230 mm above the neutral axis is 0.0767 mm/mm and the maximum normal strain in the beam is 0.01 mm/mm.
In order to find the normal strain at a point above the neutral axis, we need to first calculate the radius of curvature (ρ) using the given information.
The radius of curvature is the reciprocal of the curvature (κ), which can be determined using the formula
κ = M / EI
where M is the bending moment, E is the modulus of elasticity, and I is the moment of inertia.
Next, we can find the normal strain (ε) using the formula
ε = y / ρ
where y is the distance above the neutral axis.
Plugging in the values, we have
ε = (230 mm) / (3 m)
ε = 0.0767 mm/mm.
To find the maximum normal strain in the beam, we need to use the given strain distribution diagram.
From the diagram, we can see that the maximum normal strain occurs at the top surface of the beam.
Therefore, the maximum normal strain (Emax) is the strain at the point with the maximum y value.
Plugging in the values from the diagram, we have Emax = 0.01 mm/mm.
To summarize:
- The normal strain at a point 230 mm above the neutral axis is 0.0767 mm/mm.
- The maximum normal strain in the beam is 0.01 mm/mm.
Learn more about the normal strain from the given link-
https://brainly.com/question/7768495
#SPJ11
. How many fifths are in 1 1/4? *
Answer: 1 and 1/5
Step-by-step explanation:
To determine how many fifths are in 1 1/4, we need to convert the mixed number 1 1/4 into an improper fraction. To do this, we multiply the denominator by the whole number and add the numerator, then place that sum over the original denominator.So we get 1 1/4 = (4 x 1 + 1) / 4 = 5/4.
Now, we can divide 5 by 4 to find how many fifths are in 1 1/4. 5 divided by 4 is equal to 1 with a remainder of 1. This means that there is 1 whole fifth in 1 1/4 and one-fifth left over.
Therefore, the answer is 1 and 1/5.
So, there are 1 and 1/5 fifths in 1 1/4.
Donald secured a 4-year car lease at 5.30% compounded annually that required him to make payments of $882.31 at the beginning of each month. Calculate the cost of the car if he made a downpayment of $1,750.
The cost of the car when he made a down payment is approximately $39,834.35.
To calculate the cost of the car, we need to find the present value of the monthly payments and the down payment.
Step 1: Calculate the present value of the monthly payments:
The lease requires Donald to make payments of $882.31 at the beginning of each month for 4 years. We can use the present value formula to calculate the cost of these payments.
PV = PMT × [(1 - (1 + r)^(-n)) / r]
Where:
PV = Present value
PMT = Payment amount per period
r = Interest rate per period
n = Total number of periods
In this case, PMT = $882.31, r = 5.30% compounded annually (which is equivalent to 5.30%/12 = 0.442% compounded monthly), and n = 4 years × 12 months/year = 48 months.
Substituting these values into the formula, we get:
PV = $882.31 × [(1 - (1 + 0.00442)^(-48)) / 0.00442]
Using a calculator, the present value of the monthly payments is approximately $38,084.35.
Step 2: Add the downpayment:
Donald made a downpayment of $1,750. We need to add this amount to the present value of the monthly payments.
Total cost of the car = Present value of the monthly payments + Downpayment
Total cost of the car = $38,084.35 + $1,750
Calculating this, we find that the cost of the car is approximately $39,834.35.
Therefore, the cost of the car is approximately $39,834.35 when considering the 4-year car lease with 5.30% compounded annually, monthly payments of $882.31, and a downpayment of $1,750.
Learn more about compound interest:
brainly.com/question/24274034
#SPJ11
2x+4,x2-4 x2-x-6 hcf
The highest common factor (HCF) of the given polynomials is (x + 2).
To find the highest common factor (HCF) of the given polynomials, we need to factorize each polynomial and identify the common factors.
Polynomial: 2x + 4
This polynomial can be factored out by taking out the common factor of 2:
2(x + 2)
Polynomial: x^2 - 4
This is a difference of squares, which can be factorized as:
(x + 2)(x - 2)
Polynomial: x^2 - x - 6
To factorize this polynomial, we need to find two numbers that multiply to give -6 and add up to -1 (coefficient of x). The numbers are -3 and 2, so we can rewrite the polynomial as:
(x - 3)(x + 2)
Now, we can compare the factors of the three polynomials to determine the HCF. We identify the common factors by taking the minimum power of each common factor:
Common factors:
(x + 2)
Hence, the highest common factor (HCF) of the given polynomials is (x + 2).
To learn more about HCF
https://brainly.com/question/29114178
#SPJ8
Complete question:
Find HCF - 2x + 4, x^2 - 4, x^2 - x - 6
explain briefly and in your own words: what is Cognitive Ergonomics?
Cognitive ergonomics strives to create systems and environments that support and enhance human cognition, leading to improved efficiency, safety, productivity, and user satisfaction.
Cognitive ergonomics is the study of how individuals interact with technology and how to optimize these interactions to improve user performance, satisfaction, and well-being. This field is concerned with how people process information, make decisions, solve problems, and communicate in the context of technology use.
Cognitive ergonomics examines how users perceive, think, and reason about information, as well as how they feel and behave when using technology. The goal of cognitive ergonomics is to design systems that are easy to use, intuitive, and efficient, while minimizing cognitive workload and errors.
Cognitive ergonomics is a multidisciplinary field that draws on cognitive psychology, human factors engineering, computer science, and other disciplines to address the challenges of designing technology for human use. It involves a deep understanding of human cognition, emotion, perception, and behavior, as well as an appreciation for the context in which technology is used.
To know more about efficiency visit
https://brainly.com/question/30861596
#SPJ11
What is the final temperature (°C) when 15 g of Hg at 22.0°C
receives 43.8 J of heat? (specific heat of Hg = 0.139)
The final temperature when 15 g of Hg at 22.0 °C receives 43.8 J of heat is 43.39 °C.
Given data:
Mass (m) = 15 g
Specific heat (c) of mercury = 0.139 J g⁻¹ °C⁻¹
Temperature change (ΔT) = ?
Initial temperature (T₁) = 22 °C
Heat received (q) = 43.8 J
Formula to calculate temperature change:
ΔT = q / (mc)
Substitute the given values:
ΔT = 43.8 J / (15 g × 0.139 J g⁻¹ °C⁻¹)
ΔT = 21.39 °C
The final temperature (T₂) can be calculated as:
T₂ = T₁ + ΔT
T₂ = 22 + 21.39
T₂ = 43.39 °C
Therefore, the final temperature when 15 g of Hg at 22.0 °C receives 43.8 J of heat is 43.39 °C.
Know more about temperature change:
https://brainly.com/question/31081480
#SPJ11
The final temperature when 15 g of Hg at 22.0 °C receives 43.8 J of heat is 43.39 °C.
Given data:
Mass (m) = 15 g
Specific heat (c) of mercury = 0.139 J g⁻¹ °C⁻¹
Temperature change (ΔT) = ?
Initial temperature (T₁) = 22 °C
Heat received (q) = 43.8 J
Formula to calculate temperature change:
ΔT = q / (mc)
Substitute the given values:
ΔT = 43.8 J / (15 g × 0.139 J g⁻¹ °C⁻¹)
ΔT = 21.39 °C
The final temperature (T₂) can be calculated as:
T₂ = T₁ + ΔT
T₂ = 22 + 21.39
T₂ = 43.39 °C
Therefore, the final temperature when 15 g of Hg at 22.0 °C receives 43.8 J of heat is 43.39 °C.
Know more about temperature change:
brainly.com/question/31081480
#SPJ11
. A function is given by f(x) = 6e-5. Now answer the following:
(a) Approximate the derivative of f(x) at ro= 0.2 with step size h = 0.5 using the central difference method up to 6 significant figures.
(b) Approximate the derivative of f(x) at 20 = 0.2 with step size h = 0.5 using the forward difference method up to 6 significant figures.
(c) Calculate the truncation error of f(x) at x0 = 2 using h= 1, 0.1, 0.01, 0.0001 in the above men- tioned two methods.
(d) Compute Do at o= 0.2 using Richardson extrapolation method up to 6 significant figures and calculate the truncation error.
Given function is [tex]f(x) = 6e^(-5)[/tex]. Approximating the derivative of f(x) at x=0.2 with step size h = 0.5 using the central difference method up to 6 significant figures:
The formula to calculate the derivative of the function using the central difference method is:
[tex]f'(x) = [f(x+h) - f(x-h)] / 2h[/tex]
When x=0.2, h=0.5, then the formula will be:
[tex]f'(0.2) = [f(0.2+0.5) - f(0.2-0.5)] / 2(0.5)[/tex]
[tex]f'(0.2) = [6e^(-2.5) - 6e^(-7.5)] / 1[/tex]
Approximating the derivative of f(x) at x=0.2 with step size h = 0.5 using the forward difference method up to 6 significant figures:The formula to calculate the derivative of the function using the forward difference method is:
[tex]f'(x) = [f(x+h) - f(x)] / h[/tex]
When x=0.2, h=0.5, then the formula will be:
[tex]f'(0.2) = [f(0.2+0.5) - f(0.2)] / 0.5f'(0.2)[/tex]
=[tex][6e^(-2.5) - 6e^(-5)] / 0.5[/tex]
To know more about Approximating visit;
https://brainly.com/question/32926355
#SPJ11
How many nodes are there in the HOMO of the 1,3,5-hexatriene under a normal condition? A) 1 B) 2 C) 3 D) 4 E) 5
Correct option is C) 3.Under normal conditions, there are three nodes in the HOMO of 1,3,5-hexatriene. HOMO stands for Highest Occupied Molecular Orbital.1,3,5-hexatriene is an organic compound that has six carbon atoms and three double bonds.
The compound has a planar structure. In organic chemistry, molecular orbitals (MOs) are hypothetical wave functions for electrons that extend over the entire molecule. MO theory describes how these orbitals relate to the electronic structure of molecules.MOs of organic molecules are made up of combinations of atomic orbitals (AOs) on individual atoms.
The number of nodes in an MO refers to the number of regions where the probability of finding an electron is zero. For a given molecule, MOs are derived from the AOs of its constituent atoms. The HOMO, being the highest occupied MO, is of particular importance because it determines the reactivity of a molecule.
The HOMO of 1,3,5-hexatriene is the MO with the highest energy that has at least one electron in it. Based on the molecular orbital diagram for 1,3,5-hexatriene, the HOMO has three nodal planes. Therefore, the correct option is C) 3.
To know more about Highest Occupied Molecular Orbital visit-
brainly.com/question/32065294
#SPJ11
Martensite is stronger than tempered martensite. Select one
Martensite is stronger than tempered martensite due to its brittle nature, while tempered martensite offers a combination of strength and toughness, making it suitable for industrial applications.
Martensite is stronger than tempered martensite. This statement is true and the reason behind this is explained below:
Martensite is a phase that is formed by the rapid cooling of austenite. It is a hard and brittle phase, but it possesses high strength and hardness. However, due to its brittle nature, it is not suitable for most industrial applications.Tempered martensite is produced by heating the martensitic phase to an intermediate temperature and then cooling it slowly. This process reduces the brittleness of the martensite and improves its toughness. As a result, tempered martensite possesses lower strength and hardness than martensite but higher toughness. This makes it more suitable for industrial applications where a combination of strength and toughness is required.
In conclusion, martensite is stronger than tempered martensite. However, tempered martensite possesses higher toughness than martensite. Therefore, the choice between martensite and tempered martensite depends on the application and the desired properties.
To know more about Martensite Visit:
https://brainly.com/question/33421309
#SPJ11
Problem 9-14 Production and Direct Materials Purchases Budgets [LO2] Symphomy Electronics produces wireless speakers for outdoor use on patios, decks, etc. Their most popular model is the All Weather and requires four separate XL12 components per unit. The company is now planning faw material needs for the second quarter. Sales of the All Weather are the highest in the second quarter of each year as customers prepare for the summer season. The carnpany has the following inventory requirements: a. The finlshed goods inventory on hand at the end of each month must be equal to 15.700 units plus 10% of the next month's sales. The finished goods inventory on March 31 is budgeted to be 28,600 units. b. The saw matetials inventory on hand at the end of each month must be equal to 20% of the following month's production needs for raw materials. The raw materials inventory on March 31 for XL 12 is budgeted to be 97,600 components. c. The company maintains no work in process inventories. A soles budget for the All Weather speaker is as follows: Reguired: 1. Prepare a production budget for the All Weather for April, May, June and July. Required: 1. Prepare a production budget for the All Weather for April, May, June and July. 2. Prepare a direct materials purchases budget showing the quantity of XL. 12 components to be purchased for April, May and June and for the quarter in total.
The problem is asking to prepare a production budget and direct materials purchases budget for Symphony Electronics. Symphony Electronics manufactures wireless speakers, which are ideal for outdoor use on patios, decks, and so on. The All Weather model is their most popular, requiring four different XL12 components per unit.
The company is currently preparing for raw material requirements for the second quarter. The following inventory requirements exist in the company: the finished goods inventory must be equal to 15,700 units plus 10% of the next month's sales, and the raw materials inventory on hand must be equal to 20% of the following month's production needs. Symphony Electronics does not keep work in process inventories. It assists in calculating the quantity of finished goods that the Symphony Electronics company must generate to fulfill the customer demand for the All Weather speaker.
To calculate the quantity of finished goods, use the following formula:
Budgeted sales = Desired ending finished goods inventory + Required beginning finished goods inventory - Actual beginning finished goods inventory
First, calculate the required beginning finished goods inventory:
Required beginning finished goods inventory = Desired ending finished goods inventory of the previous month + 10% of next month's sales
Then calculate the monthly production requirements for each month:
Production = Budgeted sales + Required ending finished goods inventory - Expected beginning finished goods inventory
Finally, the production budget for Symphony Electronics is as follows:
April: 64,500 units
May: 94,000 units
June: 122,500 units
July: 73,400 units
Next, create a direct materials purchases budget, which details the quantity and cost of the raw materials required to complete the budgeted production. This can be calculated using the following formula:
Raw materials required for production = Units of raw materials per unit of production * Budgeted production
The budget for raw materials purchases is then determined using the following formula:
Required raw materials purchases = Raw materials required for production + Desired ending raw materials inventory - Beginning raw materials inventory
The direct materials purchases budget for Symphony Electronics is as follows:
April: 258,000 components
May: 376,000 components
June: 490,000 components
Quarter in total: 1,124,000 components
To know more about Symphony visit :
https://brainly.com/question/26664611
#SPJ11
Please help I need the answer asp will give brainlist
The system of inequality y < 4x - 2 is represented by option B
How to identify inequality graphsAn inequality graph represents the graphical representation of an inequality on a coordinate plane.
It visually represents the set of points that satisfy the given inequality. In the graph, the shaded region indicates the solution set of the inequality.
In the equation we watch out for dotted lines which is used to represent a less than of greater than without "equal to"
The graph is attached
Learn more about linear functions at:
https://brainly.com/question/29721668
#SPJ1
Question Rainfall of 2.50m per annum falls on a strip of land 1km wide lying between two parallel canals, one of which (canal A) is 3m higher than the other (canal B). The infiltration rate is 80% of the rainfall and there is no runoff. The aquifer that contains the canals is 10m deep below the level of canal B and both canals fully penetrate it. It is underlain by a horizontal impermeable stratum. Compute the discharge per 'm length into both canals, assuming their boundaries are vertical, and the aquifer coefficient of permeability is 10m/day.
The discharge per m length into both canals is 2025 m³/year.
Given data
Rainfall = 2.5 m/year
Width of land strip = 1 km = 1000 m
Canal A is 3 m higher than canal B.
Infiltration rate = 80% of the rainfall.
In the given problem, we need to calculate the discharge per m length into both canals.
So,
The discharge = Width of the land strip x infiltration rate x coefficient of permeability
The water that infiltrates through the soil goes down into the aquifer. The canals also get water from the aquifer.
Therefore, the total water flowing into both canals = infiltration into the aquifer + water directly flowing into the canals.
Now, calculating the infiltration,
Infiltration rate = 80% of 2.5 m/year
Infiltration rate = (80/100) x 2.5 m/year
Infiltration rate = 2 m/year
The volume of water infiltrating per year = Infiltration rate x area of land strip= 2 x 1000 m x 1 km= 2 x 1000 x 1000 m³
Total volume of water flowing into both canals = Infiltration + directly flowing water into the canals
The area of cross-section of each canal = 1 m x 10 m = 10 m²
So, the total volume of water flowing into both canals = Total water infiltrated per year+ Total water flowing into canals
= 2 x 1000 x 1000 + (3 - 0.5) x 1000 x 10
= 2 x 10^6 m³ + 25000 m³
= 2025000 m³
Discharge per m length of canal = Total volume of water / Length of the canal
The length of each canal = 1000 m
So, the discharge per m length of canal= 2025000 / 1000= 2025 m³/year
Therefore, the discharge per m length into both canals is 2025 m³/year.
To know more about permeability, visit:
https://brainly.com/question/32482559
#SPJ11
Does a reaction occur when aqueous solutions of barium iodide and cobalt(II) sulfate are combined? (a) yes (b) no If a reaction does occur, write the net ionic equation. Use the solubility rules provided in the OWL Preparation Page to determine the solubility of compounds. Be sure to specify states such as (aq) or (s). If a box is not needed leave it blank.
The given aqueous solutions are cobalt(II) sulfate and barium iodide, and we are to determine if a reaction occurs when they are combined.
Option b is correct.
The balanced equation is: CoSO₄(aq) + BaI₂(aq) → BaSO₄(s) + CoI₂(aq)
There is a reaction that occurs when aqueous solutions of barium iodide and cobalt(II) sulfate are combined. The products formed are solid barium sulfate and cobalt(II) iodide in aqueous solution.
The net ionic equation is: Co²⁺(aq) + 2I⁻(aq) → CoI₂(aq)The sulfate ion doesn't appear in the net ionic equation because it does not participate in the reaction. The barium ion and the sulfate ion will form a precipitate, but they cancel each other out in the net ionic equation.
To know more about reaction visit:-
https://brainly.com/question/30464598
#SPJ11
Menara JLand project is a 30-storey high rise building with its ultra-moden facade with a combination of unique forms of geometrically complex glass facade. This corporate office tower design also incorporate a seven-storey podium which is accessible from the ground level, sixth floor and seventh floor podium at the top level. The proposed building is located at the Johor Bahru city centre. (a) From the above project brief, discuss the main stakeholders that technically and directly will be involved in consulting this project. (b) Interpret the reasons why the contract management need to be efficiently managed and administered throughout the construction process for the project above? (c) (C In your opinion, why different perspectives or views from the stakeholders are important to be coordinated systematically by the project manager during the above mentioned construction project planning stage?
(a) The main stakeholders involved in consulting the Menara JLand project are the developer, architects, engineers, contractors, regulatory authorities, and the local community.
(b) Efficient contract management is necessary for the Menara JLand project to ensure smooth operations, cost control, quality assurance, and risk mitigation throughout the construction process.
(c) Coordinating different perspectives and views from stakeholders during the construction project planning stage of Menara JLand ensures a comprehensive approach and minimizes conflicts.
(a) The Menara JLand project is a complex undertaking that requires input and collaboration from various parties. The developer holds a significant stake as they initiate and finance the project, while architects and engineers play a crucial role in designing the high-rise building and its unique glass facade.
Contractors are responsible for the construction and implementation of the design, ensuring that it meets the project specifications. Regulatory authorities, such as local government bodies, oversee compliance with building codes, permits, and other regulations. Finally, the local community's involvement is essential as they may be impacted by the project and their opinions should be considered.
(b) Contract management is vital in the construction industry to establish clear expectations, responsibilities, and deliverables for all parties involved. Efficient contract management allows for proper documentation of agreements, specifications, and changes, reducing the likelihood of disputes and conflicts. It helps maintain project timelines, cost control, and quality assurance by ensuring that the work performed aligns with the agreed-upon terms.
Moreover, effective contract management facilitates communication, problem-solving, and compliance with legal and regulatory requirements. By managing contracts efficiently, the project can minimize delays, financial losses, and other potential risks.
(c) In the planning stage, involving various stakeholders and their perspectives is crucial to create a well-rounded project plan. Different stakeholders bring unique insights, expertise, and concerns that can shape the project's direction. By coordinating systematically, the project manager can identify potential risks and opportunities, make informed decisions, and manage conflicts effectively.
Coordinating different perspectives also fosters collaboration, stakeholder engagement, and buy-in, as it shows that their opinions are valued and considered. It helps align objectives, optimize resources, and ensure that the project plan reflects a balanced approach that addresses diverse interests and priorities. Ultimately, systematic coordination of stakeholder perspectives contributes to the overall success of the Menara JLand construction project.
Learn more about contract management
brainly.com/question/31262501
#SPJ11
QUESTIONNAIRE Answer the following: 1. Compute the angle of the surface tension film leaves the glass for a vertical tube immersed in water if the diameter is 0.25 in and the capillary rise is 0.08 inches and o = 0.005 lb/ft. 2. Find the atmospheric pressure in kPa if a mercury barometer reads 742 mm.
1. The angle of the surface tension film leaving the glass for a vertical tube immersed in water is approximately 20 degrees.
2. The atmospheric pressure in kPa, given a mercury barometer reading of 742 mm, is approximately 98.93 kPa.
1. To calculate the angle, we use the formula θ = 2 × arctan(h/d), where θ is the contact angle, h is the capillary rise, and d is the diameter of the tube. Plugging in the given values, we have θ = 2 × arctan(0.08/0.25). Evaluating this expression, we find θ ≈ 20 degrees.
The concept of surface tension plays a crucial role in various natural phenomena and industrial processes. Understanding how surface tension affects liquids' behavior in confined spaces, such as capillary tubes, helps explain phenomena like capillary action and meniscus formation.
Moreover, this knowledge finds applications in fields like medicine (e.g., in microfluidics) and engineering (e.g., in designing capillary-driven systems). Studying the behavior of fluids at a small scale can lead to innovative technologies and improved understanding of fluid dynamics.
2. To convert the mercury barometer reading from mm to kPa, we use the equation: atmospheric pressure (in kPa) = (barometer reading in mm × density of mercury × acceleration due to gravity) / 1000. Given that the barometer reading is 742 mm and the density of mercury is approximately 13.6 g/cm³, we can calculate the atmospheric pressure as follows:
atmospheric pressure (in kPa) = (742 mm × 13.6 g/cm³ × 9.8 m/s²) / 1000
Converting units, we have:
atmospheric pressure (in kPa) ≈ (742 mm × 1.36 kg/dm³ × 0.0098 m/s²) / 1000
≈ 98.93 kPa
Therefore, the atmospheric pressure is approximately 98.93 kPa.
Barometers are essential instruments for measuring atmospheric pressure, which has significant implications in weather forecasting, aviation, and many other fields. Understanding atmospheric pressure variations helps meteorologists predict weather patterns and study atmospheric disturbances like storms and cyclones.
Additionally, atmospheric pressure influences various natural phenomena and human activities, making it a crucial parameter in scientific research and engineering projects.
Learn more about surface tension
brainly.com/question/571207
#SPJ11
P-34 is unstable and radioactive. Is its n/p ratio too high or too low? In that case, which process could lead to stability? (Make sure that both parts of the answer are correct.) Its n/p ratio is too high. It could attain stability by electron capture. Its n/p ratio is too low. It could attain stability by beta emission. Its n/p ratio is too high. It could attain stability by alpha emission. Its n/p ratio is too low. It could attain stability by electron capture. Its n/p ratio is too high. It could attain stability by beta emission.P-34 is unstable and radioactive. Is its n/p ratio too high or too low? In that case, which process could lead to stability? (Make sure that both parts of the answer are correct.) Its n/p ratio is too high. It could attain stability by electron capture. Its n/p ratio is too low. It could attain stability by beta emission. Its n/p ratio is too high. It could attain stability by alpha emission. Its n/p ratio is too low. It could attain stability by electron capture. Its n/p ratio is too high. It could attain stability by beta emission. please tell which option and explain
So, the correct option is: Its n/p ratio is too low. It could attain stability by beta emission.
P-34 is unstable and radioactive. Its n/p ratio is too low, which means it has too few neutrons compared to protons. In this case, the process that could lead to stability is beta emission. During beta emission, a neutron in the nucleus of P-34 can undergo beta decay, where it is converted into a proton, releasing a beta particle (an electron) and an antineutrino. This conversion increases the number of protons and balances the n/p ratio, making the nucleus more stable.
To know more about beta emission,
https://brainly.com/question/32095287
#SPJ11
1. Determine THREE (3) factors influencing the selection of ground improvement techniques. The proposed construction area for the new administration building for the LIMKOKWING University is located on the soft soil which is not suitable to support the structure over them. Ground improvement may be proposed for the safe construction process.
2. Identify the factors that are affecting the soil compaction. In the construction of highway embankments, earth dams, and many other engineering structures, loose soils must be compacted to increase their unit weights. Compaction increases the strength characteristics of soils, which increase the bearing capacity of foundations constructed over them.
Soil type, pricing, and availability are three factors that can affect your decision when choosing a ground improvement strategy.
What are they?
Soil type: Different ground improvement techniques are available for different types of soils.
The soil conditions on the construction site determine the appropriate technique for ground improvement.
Costs: The choice of ground improvement technique is also influenced by the cost of the technique. A particular ground improvement method may be effective but may be more expensive than another method.
As a result, the costs of different ground improvement techniques must be weighed against their benefits.
Availability: The availability of a specific ground improvement technique is another factor to consider.
Certain techniques may be unavailable due to a lack of technical expertise or appropriate equipment in the region.
2. Factors that affect soil compaction are as follows:
Water content: The degree of compaction is influenced by the water content of the soil.
Moisture helps the particles move closer together, but too much water results in an increase in volume and a decrease in the density of the soil.
The optimum water content for a specific soil type is used to achieve maximum dry density, which is the density of the soil when it has been completely compacted.
Granularity: The soil particle size distribution affects soil compaction. Soils with small grain sizes compact more closely than soils with large grain sizes.
The smaller grain sizes are packed tightly, reducing the air spaces between them, resulting in a denser soil when compacted.
Type of soil: The type of soil is also crucial in determining how well it will compact.
Clay soils are more readily compacted than sandy soils, and silty soils are more readily compacted than sandy soils.
Dense soils necessitate more effort to compact.
To know more on soil visit:
https://brainly.com/question/31227835
#SPJ11
The selection of ground improvement techniques for an administration building on soft soil is influenced by soil type, construction load, cost, and time constraints. Factors affecting soil compaction for structures include moisture content, soil type, and compaction effort, impacting construction outcomes.
1. Factors influencing the selection of ground improvement techniques for the construction of the new administration building for LIMKOKWING University on soft soil:
a. Soil Type and Properties: The characteristics of the soil, such as its composition, strength, and permeability, play a crucial role in determining the appropriate ground improvement technique. For example, if the soil is highly compressible and weak, techniques like deep soil mixing or stone columns may be preferred to increase its load-bearing capacity.
b. Construction Load and Building Design: The anticipated load and design of the administration building are important factors to consider when selecting ground improvement techniques. The weight and type of structure can influence the choice of technique to ensure stability and prevent settlement or uneven settlement.
c. Cost and Time Constraints: The financial and schedule constraints of the project are also factors to consider. Some ground improvement techniques may be more expensive or time-consuming than others. It is important to balance the cost and time requirements with the desired level of improvement.
2. Factors affecting soil compaction for the construction of highway embankments, earth dams, and other engineering structures:
a. Moisture Content: The moisture content of the soil affects its compaction characteristics. Optimum moisture content needs to be achieved to obtain maximum compaction. Too much moisture can result in a saturated soil that is difficult to compact, while too little moisture can lead to inadequate compaction.
b. Soil Type: Different types of soils have varying compaction characteristics. Cohesive soils, such as clay, require more effort to compact compared to granular soils like sand. The particle size distribution and grain shape of the soil also influence its compaction behavior.
c. Compaction Effort: The amount of compaction effort, typically achieved by using heavy machinery like compactors or rollers, is another crucial factor. The compaction effort needs to be sufficient to achieve the desired level of soil compaction and meet the engineering requirements.
It's important to note that these factors are not exhaustive, and there may be additional factors to consider depending on the specific project and site conditions.
Learn more about time constraints
https://brainly.com/question/31038373
#SPJ11
Bill plans to open a self-serve grooming center in a storefront. The grooming equipment will cost $445,000. Bill expects aftertax cash inflows of $96,000 annually for six years, after which he plans to scrap the equipment and retire to the beaches of Nevis. The first cash inflow occurs at the end of the first year. Assume the required return is 11 percent. a. What is the project's profitability index (PI)? (Do not round intermediate calculations and round your answer to 3 decimal places, e.g., 32.161.) b. Should the project be accepted?
The project's profitability index (PI) is 1.085 and Yes, the project should be accepted.
To determine the profitability index (PI) of the project, we need to calculate the present value of the cash inflows and compare it to the initial investment.
Given:
Initial investment (Cost of grooming equipment) = $445,000
Expected cash inflows per year = $96,000
Project duration = 6 years
Required return = 11%
a. To calculate the profitability index (PI), we first need to find the present value of the cash inflows using the required return rate. Then we divide the present value of cash inflows by the initial investment.
Using the formula for present value of cash inflows:
PV = CF1 / (1 + r) + CF2 / (1 + r)^2 + ... + CFn / (1 + r)^n
where PV is the present value, CF is the cash inflow, r is the required return rate, and n is the year.
Calculating the present value of cash inflows:
PV = $96,000 / (1 + 0.11)^1 + $96,000 / (1 + 0.11)^2 + ... + $96,000 / (1 + 0.11)^6
PV = $455,090.91
Now we can calculate the profitability index:
PI = PV / Initial investment
PI = $455,090.91 / $445,000
PI = 1.085 (rounded to 3 decimal places)
b. The profitability index (PI) is greater than 1, which indicates that the present value of cash inflows is higher than the initial investment. Therefore, the project should be accepted.
Learn more about profitability index (PI): https://brainly.com/question/29241903
#SPJ11
Which of the following measuring devices used to measure liquid level in the tank 2 Select one: a. Displacer devices b. Ultrasonic Level Meter c. Float- actuated devices d. Orifice plates TRUE OR FALSE: In on-off control switching differential is the range of process variable values where the controller tells final control element to open and to shut Select one: O True D O False TRUE OR FALSE: On-off controller used where precise control is not necessary and where the mass of system is small Select one: True False
The two measuring devices used to measure liquid level in the tank are Displacer devices and Float- actuated devices. The options a and c are the correct answers.
Among the given measuring devices used to measure liquid level in the tank, Displacer devices and Float-actuated devices are the measuring devices used to measure liquid level in the tank. These are given below:
Displacer devices: These devices operate on Archimedes’ principle and are based on the design of a spring with a cylinder attached to its bottom end. These are generally used for level measurement in liquids that are not transparent and whose properties do not allow the use of other types of level indicators.
Float-actuated devices: These devices use the buoyancy principle and have a buoyant element. These are used for level measurement in transparent and opaque liquids where a reasonably accurate measurement of the level is needed. The given statement, "In on-off control switching differential is the range of process variable values where the controller tells final control element to open and to shut" is true. In on-off control switching differential is the range of process variable values where the controller tells final control element to open and to shut.
The statement "On-off controller used where precise control is not necessary and where the mass of system is small" is also true. On-off controller used where precise control is not necessary and where the mass of the system is small.
Learn more about Displacer devices visit:
brainly.com/question/32025525
#SPJ11
A 15 g sample of mixed MSW is combusted in a calorimeter having a heat capacity of 8750 cal/°C. The temperature increase on combustion is 2.75°C. Calculate the heat value of the sample.
The heat value of a sample can be calculated using the equation: Heat value = (mass of sample) x (temperature increase) / (heat capacity of calorimeter). Given: Mass of sample = 15 g. Temperature increase on combustion = 2.75°C. Heat capacity of calorimeter = 8750 cal/°C. To find the heat value of the sample, substitute the given values into the equation: Heat value = (15 g) x (2.75°C) / (8750 cal/°C). Now, let's calculate the heat value step-by-step:
Step 1: Multiply the mass of the sample by the temperature increase
15 g x 2.75°C = 41.25 g°C
Step 2: Divide the result from Step 1 by the heat capacity of the calorimeter
41.25 g°C / 8750 cal/°C = 0.00471 cal
Therefore, the heat value of the 15 g sample is 0.00471 cal.
temperature : https://brainly.com/question/25677592
#SPJ11
1. What amount is 230% of $450?
2. What amount is 0.04% of $200,000?
3. $135 is what percent of $2,750?
4. $4.55 is what percent of $9,1007
5. What percent of $5,000 is $675?
To find 230% of $450, you can calculate it as follows:230% = 230/100 = 2.3 (as a decimal)Amount = 2.3 * $450 = $1,035.
2. To find 0.04% of $200,000, you can calculate it as follows:
0.04% = 0.04/100 = 0.0004 (as a decimal)
Amount = 0.0004 * $200,000 = $80
3. To find what percent $135 is of $2,750, you can calculate it as follows:
Percent = ($135 / $2,750) * 100
Percent ≈ 4.91% (rounded to two decimal places)
4. To find what percent $4.55 is of $9,107, you can calculate it as follows:
Percent = ($4.55 / $9,107) * 100
Percent ≈ 0.05% (rounded to two decimal places)
5. To find what percent $675 is of $5,000, you can calculate it as follows:
Percent = ($675 / $5,000) * 100
Percent ≈ 13.5% (rounded to one decimal place)
To know more about amount click-
http://brainly.com/question/25720319
#SPJ11