The flow rate of fuel from the pump is 0.25 liters/second.
StepsTo find the flow rate of fuel from the pump, we need to determine the volume of fuel that is dispensed per unit of time.
75 liters = 0.075 cubic meters
Mass = volume x density
Mass = 0.075 cubic meters x 680 kg/cubic meter
Mass = 51 kg
we can convert the time it takes to fill the tank from minutes to seconds:
5 minutes = 300 seconds
Finally, we can calculate the flow rate of fuel from the pump:
Flow rate = mass/time
Flow rate = 51 kg / 300 seconds
Flow rate = 0.17 kg/second
Since we know the relative density of the fuel is 0.68, we can convert the flow rate from kilograms to liters:
Flow rate = mass/density
Flow rate = 0.17 kg / 0.68 kg/liter
Flow rate = 0.25 liters/second
The flow rate of fuel from the pump is 0.25 liters/second.
learn more about relative density here
https://brainly.com/question/29083188
#SPJ1
how many grams of aluminum must react with sulfuric acid to produce 2.6L of hydrogen gas at STP?
Answer:
aluminium reacts with sulfuric acid to produce aluminium sulfate and hydrogen gas according to the following equation: H2SO4 (aq) + Al (s) = Al2 (SO4)3 (aq) + H2 (g).
What happens to the total mass during a chemical reaction
Explanation:
That the mass can neither be created nor destroyed in a chemical reaction.
20 points
How many grams of water and salt are required to prepare 350 grams of 20% solution?
Answer:
mass of salt = 70 grams
mass of water = 280 grams
Explanation:
It's about Mass percentage
Mass percentage = [tex]\frac{Solute}{solution } \times 100 \%[/tex]
Given that:
By substituting with given data in mass percentage formula:
[tex]20\%= \frac{solute}{350}[/tex]
then, solute mass = [tex]\frac{350 \times 20}{100} = 70 g[/tex]
So, mass of water = 350 - 70 = 280 grams
hope you find this easy to understand....
Have any questions? Write in the comments.
give me brainliest if you found this answer useful
pls help me in solve this question in chemistry
The chemical equation for the decomposition of water is:
[tex]2 H_2O -- > 2 H_2 + O_2[/tex]
To balance this equation, we need to count the number of atoms of each element on both sides of the equation.
On the left side of the equation, we have:
2 hydrogen atoms (2 H₂O)
2 oxygen atoms (2 H₂O)
On the right side of the equation, we have:
2 hydrogen atoms (2 H₂)
2 oxygen atoms (1 O₂)
We can see that the number of hydrogen atoms is already balanced, but the number of oxygen atoms is not. To balance the equation, we need to add a coefficient in front of O2 so that we have the same number of oxygen atoms on both sides.
The balanced equation is:
[tex]2 H_2O -- > 2 H_2 + 1 O_2[/tex]
A compound is broken down into simpler compounds during a decomposition reaction. Different techniques, such as heating, exposure to light, or the inclusion of a catalyst, can be used to produce this reaction.
The reactant component splits into two or more products, which may be elements or compounds, during decomposition. A synthesis reaction, in which less complex substances join to create a more complex compound, is the antithesis of this reaction.
learn more about decomposition here
https://brainly.com/question/27746877
#SPJ1
To _____ means to draw a conclusion based on something you observe
A. Guess
B. Control
C. Model
D. Infer
Answer: D
Explanation: Infer
Calculate the amount of sodium acetate in gram required to prepare a buffer solution having pH 5.1 with one liter of 0.2N acetic acid solution. Ka value of acetic acid is 1.8 x 104. [2
The amount of sodium acetate in grams required to prepare a buffer solution having pH 5.1 with one liter of 0.2N acetic acid solution is 91.8 g. The moles of acetic acid is 0.2 and the moles of acetate is 1.12. The Ka of acetic acid is 1.8 x 10^4.
Given DataMolarity of acetic acid = 0.2N Ka of acetic acid = 1.8 x 10^4 Volume of acetic acid = 1000 mlMoles of acetic acid = (0.2 x 1000)/1000= 0.2 mol
pH of buffer = 5.1
[Acetate]/[Acetic acid] = 10^(pH - pKa)
[Acetate]/[Acetic acid] = 10^(5.1 - 4.75)
[Acetate]/[Acetic acid] = 5.62
Moles of acetate = 0.2 x 5.62 = 1.12 mol
Mass of sodium acetate = 1.12 x 82.03 = 91.8 g
Learn more about sodium acetate here:
https://brainly.com/question/30224584
#SPJ1
Complete each nuclear fission reaction.
Nuclear fission is a process where a heavy atomic nucleus is split into two or more lighter nuclei, releasing a large amount of energy.
1.Uranium-235 fissioned by neutron:
U-235 + neutron → Kr-92 + Ba-141 + 3 neutrons + energy
2.Plutonium-239 fissioned by neutron:
Pu-239 + neutron → Sr-95 + Zr-139 + 2 neutrons + energy
3.Californium-252 fissioned by neutron:
Cf-252 + neutron → 2 Sm-126 + 3 neutrons + energy.
Nuclear fission is a process in which a heavy atomic nucleus (such as uranium-235, plutonium-239, or californium-252) is split into two or more lighter nuclei (such as krypton-92 and barium-141), along with the release of a large amount of energy in the form of radiation and kinetic energy of the resulting particles. This process is typically initiated by the absorption of a neutron by the heavy nucleus, which causes it to become unstable and split apart.
In the fission reaction, the mass of the products is slightly less than the mass of the reactant nucleus, due to the conversion of some mass into energy according to Einstein's famous equation [tex]E=mc^2[/tex], where E is the energy released, m is the mass lost, and c is the speed of light.
The energy released in nuclear fission reactions is much greater than that released in chemical reactions, making nuclear fission an attractive source of energy for power generation. However, fission reactions can also be dangerous if not properly controlled, as the released energy can cause explosions or release dangerous radiation.
Learn more about Nuclear fission here:
https://brainly.com/question/913303
#SPJ1
Part A
Use Henry's law and the solubilities given below to calculate the total volume of nitrogen and oxygen gas
that should bubble out of 1.2 L of water upon warming from 25 "C to 50 C. Assume that the water is
initially saturated with nitrogen and oxygen gas at 25 °C and a total pressure of 1.0 atm. Assume that the
gas bubbles out at a temperature of 50 ° C. The solubility of oxygenrgas at.50. °C is 27.8 mg/L at an
oxygen pressure of 1.00 atm. The solubility of nitrogen gas at 50 °C is 14.6 mg/L at a nitrogen pressure
of 1.00 atun. Assume that the air above the water contains an oxygen partial pressure of 0.21 atm and a
nitrogen partial pressure of 0.78 atm.
Express your answer using two significant figures.
Could you show all work please ?
According to Henry's law, the amount of gas dissolved in a liquid is directly proportional to the partial pressure of the gas above the liquid.
Therefore, we can use the solubilities given to calculate the amount of nitrogen and oxygen gas dissolved in 1.2 L of water at 25 °C and 1 atm pressure.
The solubility of oxygen gas at 25 °C and 1 atm is 36.0 mg/L, and the solubility of nitrogen gas at 25 °C and 1 atm is 14.7 mg/L. Using these values and the given partial pressures of oxygen and nitrogen in the air above the water, we can calculate the amount of nitrogen and oxygen gas dissolved in the water at 25 °C.
Next, we can use the ideal gas law to calculate the volume of gas that will bubble out of the water upon warming to 50 °C. Assuming the gas bubbles out at constant pressure, we can use the ideal gas law to calculate the volume of gas released.
Using these calculations, the total volume of nitrogen and oxygen gas that should bubble out of 1.2 L of water upon warming from 25 °C to 50 °C is approximately 13.3 mL.
To know more about Henry's law, visit:
https://brainly.com/question/30636760
#SPJ1
What is the concentration in molarity of an aqueous solution which contains 1.41% by mass acetone (MM = 58.08 g/mol)? The density of the solution is 0.971 g/mL.
The solution's volume is 100 divided by 0.971 to get 102.98 mL. The number of moles of the solute (acetone) per litre of the solution is its molarity. Divide the mass by the molar mass to get the number of moles of acetone: 1.41 g / 58.08 g/mol = 0.0243 mol.
What is the molarity of the an aqueous solution's concentration?Molarity (M), which is determined by dividing the solute's mass in moles by the volume of the solution in litres, is the most widely used unit to express solution concentration: litres of solution/moles of solute equals M. One litre of a solution with a 1.00 molar concentration (1.00 M) contains 1.00 moles of solute.
What is the concentration calculation formula?The proportion of the solute that is dissolved in a solution is indicated by the solution's concentration. This formula can be used to determine a solution's concentration: Concentration is calculated as Volume of Solute multiplied by 100 and Volume of Solution (ml).
To know more about mass visit:
https://brainly.com/question/15959704
#SPJ1
Which of the following is unable to be decomposed (break down) in a chemical reaction
A. Carbon dioxide
B. Table salt
C. Water
D. Helium
What is the correct equilibrium constant
expression for this equation?
2Cl₂(g) + 2H₂O(g) → 4HCI(g) + O₂(g)
O
[HC][0₂]
[Cl₂] [H₂O]
4[HCI][0₂]
2[ Cl₂]2[H₂O]
O
O
Kea
kea
kea
DONE
=
=
=
[HC]¹ [0₂]
[Ch][H,O]
Answer:
he correct equilibrium constant expression (Keq) for the given equation is:
Keq = ([HCl]^4 [O2]) / ([Cl2]^2 [H2O]^2)
Where [HCl], [O2], [Cl2], and [H2O] represent the equilibrium concentrations of the respective species in the balanced equation.
Note that the Keq expression includes only the concentrations of the gases in the equilibrium mixture, and the coefficients in the balanced equation are used as exponents to represent the stoichiometry of the reaction.
([HCl]⁴ [O[tex]_2[/tex]]) / ([Cl[tex]_2[/tex]]² [H[tex]_2[/tex]O]²) is the correct equilibrium constant expression for this equation. The reaction quotient value obtained from the expression describing chemical equilibrium.
What is equilibrium constant?The reaction quotient value obtained from the expression describing chemical equilibrium is the equilibrium constant. It is influenced by temperature and ionic strength and is unaffected by the amounts of product and reactant in a solution.
Reactions which attain heterogeneous equilibrium have more than one phase. Typically, only two phases—such as gaseous and liquid phases and solids and liquids—are present. The expression for equilibrium does not include solids.
Keq = ([HCl]⁴ [O[tex]_2[/tex]]) / ([Cl[tex]_2[/tex]]² [H[tex]_2[/tex]O]²)
Therefore, ([HCl]⁴ [O[tex]_2[/tex]]) / ([Cl[tex]_2[/tex]]² [H[tex]_2[/tex]O]²) is the correct equilibrium constant expression for this equation.
To know more about equilibrium constant, here:
https://brainly.com/question/30620209
#SPJ5
A 25.00 g sample of hydrated sodium carbonate, NaCO3 • H2O, is heated to drive off the water. After heating, 9.257 g of anhydrous NaCO3 remains. What is the value of "n" in the hydrate formula?
Value of "n" in the hydrate formula Na₂CO₃.nH₂O is 0.874, or approximately 7/8. The formula for the hydrated compound is Na₂CO₃.7/8H₂O.
What is hydrate ?A substance that contains water molecule(s) within its structure is known as a hydrate.
As , mass of water lost = Mass of hydrated sample - Mass of anhydrous sample.
So, Mass of water lost = 25.00 g - 9.257 g
Mass of water lost = 15.743 g
As, moles of water lost = (Mass of water lost) / (Molar mass of water)
So moles of water lost = 15.743 g / 18.015 g/mol
moles of water lost = 0.874 mol
0.874 mol H₂O / 1 mol Na₂CO₃ = n / 1
n = 0.874 mol H₂O/ 1 mol Na₂CO₃
n = 0.874
Therefore, value of "n" in the hydrate formula Na₂CO₃.nH₂O is 0.874, or approximately 7/8. The formula for the hydrated compound is Na₂CO₃.7/8H₂O
To know more about hydrate formula, refer
https://brainly.com/question/29405555
#SPJ1
How many liters of O2(g) at STP are evolved when 3.25 g of KNO3 decompose to KNO2 (s) and O2(g)?
2 KNO 3 (s) <=> 2KNO2 (s) + 02 (g)
Answer:
0.359 L or 359 mL of O2 gas will be produced from the given reaction at STP
Explanation:
The balanced chemical equation for the decomposition of KNO3 is:
2 KNO3 (s) → 2 KNO2 (s) + O2 (g)
From this equation, we can see that 2 moles of KNO3 produce 1 mole of O2. Therefore, we need to calculate the number of moles of KNO3 we have and use the mole ratio to find the number of moles of O2 produced.
First, we need to convert the mass of KNO3 given to moles:
moles of KNO3 = mass of KNO3 / molar mass of KNO3
The molar mass of KNO3 is 101.1 g/mol (39.1 g/mol for K, 14.0 g/mol for N, and 3 x 16.0 g/mol for 3 O atoms), so we have:
moles of KNO3 = 3.25 g / 101.1 g/mol = 0.0321 mol
Now we can use the mole ratio from the balanced equation to find the number of moles of O2 produced:
moles of O2 = 0.5 x moles of KNO3
moles of O2 = 0.5 x 0.0321 mol = 0.01605 mol
Finally, we can convert the number of moles of O2 to volume at STP using the ideal gas law:
V(O2) = n x RT/P = (0.01605 mol)(0.0821 L·atm/(mol·K) x 273.15 K)/(1 atm) = 0.359 L
Therefore, 0.359 L or 359 mL of O2 gas will be produced from the given reaction at STP.
how many grams of solute will be left if a saturated solution of NaNO3 in 50 grams of water at 30 degrees celsius is completely evaporated to dryness?
Answer:
To calculate the amount of solute (NaNO3) that will be left after the saturated solution is evaporated to dryness, we need to use the solubility of NaNO3 in water at 30 degrees Celsius. The solubility of NaNO3 in water at 30 degrees Celsius is 88.0 g/100 mL. First, we need to convert the 50 grams of water to milliliters. The density of water at 30 degrees Celsius is 0.996 g/mL. Therefore: 50 g ÷ 0.996 g/mL = 50.2 mL So, we have 50.2 mL of water in which the solubility of NaNO3 is 88.0 g/100 mL. To calculate the amount of NaNO3 that will be left after the solution is evaporated to dryness, we can
Voltaic Cells (AG and Nernst)
For a Voltaic (spontaneous) cell between each pair of metals:
sic.
d.
e.
a. Determine which metal is oxidized and which is reduced.
b.
Write the half reactions.
Write the overall reaction.
Identify the anode and cathode.
Calculate the Eᵒcell.
Calculate AG".
g. Calculate E at the specified non-standard conditions using the Nernst Equation
Questions and Calculations
-
f. Cell Diagram
Cd | Cd(NO3)2 | Cu(NO3)2 | Cu
Non-standard [Cd²+] = 0.10M
[Cu²+] = 0.20M
-IS
Answer:
0.61 V
Explanation:
a. The two metals in this voltaic cell are cadmium (Cd) and copper (Cu). Cadmium is oxidized (loses electrons) and copper is reduced (gains electrons).
b. Half-reactions:
Cathode: Cu2+(aq) + 2e- → Cu(s)
Anode: Cd(s) → Cd2+(aq) + 2e-
Overall reaction: Cd(s) + Cu2+(aq) → Cd2+(aq) + Cu(s)
c. The anode is where oxidation occurs, so the anode is the cadmium electrode. The cathode is where reduction occurs, so the cathode is the copper electrode.
d. Standard cell potential (Eᵒcell) can be calculated using the standard reduction potentials (Eᵒred) for each half-reaction.
Eᵒcell = Eᵒred(cathode) - Eᵒred(anode)
Eᵒred(Cu2+(aq) + 2e- → Cu(s)) = +0.34 V (from tables)
Eᵒred(Cd(s) → Cd2+(aq) + 2e-) = -0.40 V (from tables)
Eᵒcell = +0.34 V - (-0.40 V) = +0.74 V
e. The standard free energy change (ΔG°) can be calculated from the standard cell potential (Eᵒcell) using the following equation:
ΔG° = -nFEᵒcell
where n is the number of electrons transferred in the balanced equation (2), and F is the Faraday constant (96,485 C/mol).
ΔG° = -2 x 96,485 C/mol x 0.74 V = -141,800 J/mol = -141.8 kJ/mol
f. The cell diagram for this voltaic cell is:
Cd(s) | Cd(NO3)2 (0.10 M) || Cu(NO3)2 (0.20 M) | Cu(s)
g. The Nernst equation can be used to calculate the cell potential (E) under non-standard conditions, where the concentrations of the species involved are not at their standard state. The Nernst equation is:
E = Eᵒcell - (RT/nF) x ln(Q)
where R is the gas constant (8.314 J/mol-K), T is the temperature in Kelvin, n is the number of electrons transferred (2), F is the Faraday constant (96,485 C/mol), and Q is the reaction quotient, which is the ratio of the concentrations of the products over the concentrations of the reactants raised to their stoichiometric coefficients.
At non-standard conditions, the concentrations of the species involved are:
[Cd2+] = 0.10 M
[Cu2+] = 0.20 M
The reaction quotient (Q) is:
Q = ([Cd2+]/[Cu2+])^2 = (0.10 M / 0.20 M)^2 = 0.25
Plugging in the values:
E = 0.74 V - (8.314 J/mol-K x 298 K / (2 x 96,485 C/mol)) x ln(0.25) = 0.61 V
Therefore, the cell potential at non-standard conditions is 0.61 V.
70 POINTS your own answer , i got two different and need to get this question correct.
What is the molarity of 30.0 mL of hydrochloric acid solution after 15.0 mL of a 3.00 M solution has been diluted? ___ M (Answer Format X.X)
Answer: The molarity of the hydrochloric acid solution after dilution is 1.5 M.
Explanation: To calculate the molarity of a solution after dilution, you can use the formula M1V1 = M2V2 where M1 is the initial molarity of the solution, V1 is the initial volume of the solution, M2 is the final molarity of the solution, and V2 is the final volume of the solution.
In this case, we have 15.0 mL of a 3.00 M solution that has been diluted with water to a final volume of 30.0 mL. Using the formula above, we can calculate the final molarity as follows:
M1V1 = M2V2 (3.00 M)(15.0 mL) = M2(30.0 mL) M2 = (3.00 M)(15.0 mL) / (30.0 mL) M2 = 1.50 M
So, the molarity of the hydrochloric acid solution after dilution is 1.5 M
Hope this helps, and have a great day! =)
8OH- + 2MnO2 + 3C12-- --> 2MnO4- +6CI-+8H+
ii. Multiply to balance the charges in the reaction. (.5 point) iii. Add the questions and simplify to get a balanced equation.
The balanced chemical equation for the given reaction is:
8OH^- + 2MnO₂ + 16H⁺ + 3Cl₂ --> 2MnO₄^- + 6Cl^- + 4H₂O
How to balance a chemical equation?To balance a chemical equation, you need to adjust the coefficients of the reactants and products so that the number of atoms of each element is the same on both sides of the equation. Start by identifying the elements present in the reactants and products, and then adjust the coefficients until the equation is balanced.
To balance the charges in the given chemical equation:
i. Let's assign oxidation numbers to each element in the equation:
Hydrogen (H) has an oxidation number of +1.
Chlorine (Cl) has an oxidation number of -1.
Manganese (Mn) has an oxidation number of +4 in MnO₂ and +7 in MnO₄^-.
Oxygen (O) has an oxidation number of -2.
ii. Now we can balance the charges by adding electrons (e^-) to the appropriate side of the equation:
8OH^- + 2MnO₂ + 6Cl^- --> 2MnO₄^- + 6Cl^- + 4H₂O + 8e^-
iii. Next, we can simplify the equation by canceling out the common ions on both sides:
8OH^- + 2MnO₂+ 6Cl^- --> 2MnO₄^- + 6Cl^- + 4H₂O + 8e^-
8OH^- + 2MnO₂ --> 2MnO₄^- + 4H₂O + 8e^-
iv. Finally, we can write the balanced chemical equation by adding H+ ions to the appropriate side to balance the equation:
8OH^- + 2MnO₂ + 16H+ --> 2MnO₄^- + 6Cl^- + 4H₂O
Therefore, the balanced chemical equation for the given reaction is:
8OH^- + 2MnO₂ + 16H+ + 3Cl₂ --> 2MnO₄^- + 6Cl^- + 4H₂O
Learn more about reaction here:
https://brainly.com/question/28984750
#SPJ9
Calculate the mass of 3.000 mol of calcium
Answer: The correct answer is 120.3g
Explanation:
Atomic mass of calcium, Ca = 40.1
Mass of 1 mole of Ca is 40.1g
Mass of 3.00 moles of Ca = 3 x 40.1 = 120.3g
Hope this helps
This is a contagious disease caused by bacterial infection. Symptoms include fever, pain, redness, and swelling of the throat and tonsils. This disease is
Responses
A a common cold.a common cold.
B strep throat.strep throat.
C the flu.the flu.
D asthma.
The contagious disease described with symptoms of fever, pain, redness, and swelling of the throat and tonsils is most likely to be strep throat, which is caused by a bacterial infection called Streptococcus pyogenes.
Strep throat is a common bacterial infection that affects people of all ages but is most commonly found in children between the ages of 5 and 15. The symptoms of strep throat can range from mild to severe, and it can be treated with antibiotics. If left untreated, it can lead to more serious conditions such as rheumatic fever or kidney damage. The common cold and the flu are viral infections, while asthma is a chronic respiratory condition and not a contagious disease caused by bacterial infection. The contagious disease described with symptoms of fever, pain, redness, and swelling of the throat and tonsils is most likely to be strep throat, which is caused by a bacterial infection called Streptococcus pyogenes.
Learn more about contagious disease here
https://brainly.com/question/5495927
#SPJ1
A photon has a frequency of 5.40 × 10^4 Hz. Calculate the energy (in joules) of 1 mole of photons with this frequency. Enter your answer in scientific notation.
The energy (in joules) of 1 mole of photons with this frequency is 1.99 x 10⁻¹⁴ J per photon.
What is photon ?Should a substance happen to have a lot of electrons in a higher level, and a lower level is mostly empty then a photon can cause an electron to transfer from a higher state to a lower one. This change releases energy and creates a new photon, in addition to the one which caused the transfer. This photon can in turn induce more electrons to fall to a lower state.
use formula
The energy of 1 mole of photons with the given frequency can be calculated using the following equation:
Energy (J) = Avogadro's number x Plank's Constant x Frequency
Therefore,
Energy (J) = 6.02 x 10²³ x 6.626 x 10⁻³⁴ x 5.40 x 10⁴
Energy (J) = 1.99 x 10⁻¹⁴ J
Therefore, the energy of 1 mole of photons with a frequency of 5.40 x 10⁴ Hz is 1.99 x 10⁻¹⁴ J, expressed in scientific notation.
To know more about photon , visit ;
brainly.com/question/20912241
#SPJ1
Potassium chlorate decomposes when heated to produce potassium chloride and oxygen gas. If 15.7 L O2, STP, are produced, how many grams of potassium chlorate were used in the reaction?
[tex]57.27[/tex] grams of potassium chlorate were used in the reaction to produce [tex]15.7 L[/tex] of [tex]O_2[/tex] gas at STP.
What is the balanced chemical equation?The balanced chemical equation for the decomposition of potassium chlorate is:
[tex]2KClO_3(s) \rightarrow 2KCl(s) + 3O_2(g)[/tex]
From the equation, we can see that 2 moles of [tex]KClO_3[/tex] produce [tex]3[/tex] moles of [tex]O_2[/tex] . Therefore, the number of moles of [tex]KClO_3[/tex] can be calculated as:
moles of [tex]KClO_3 =[/tex] (moles of [tex]O_2[/tex] produced) [tex]\times (2/3)[/tex]
At STP (standard temperature and pressure), [tex]1[/tex] mole of any gas occupies [tex]22.4 L[/tex] of volume. Therefore, [tex]15.7 L[/tex] of O2 at STP corresponds to:
moles of [tex]O_2[/tex] produced [tex]= (15.7 L) / (22.4 L/mol) = 0.7018 mol[/tex]
Substituting this value into the above equation, we get:
moles of [tex]KClO3 = (0.7018 mol) \times (2/3) = 0.4679 mol[/tex]
The molar mass of [tex]KClO_3[/tex] is [tex]122.55 g/mol[/tex] . Therefore, the mass of [tex]KClO_3[/tex] used in the reaction can be calculated as:
mass of [tex]KClO_3[/tex] = (moles of [tex]KClO_3[/tex]) x (molar mass of [tex]KClO_3[/tex])
[tex]= (0.4679 mol) \times (122.55 g/mol)[/tex]
[tex]= 57.27 g[/tex]
Therefore, [tex]57.27[/tex] grams of potassium chlorate were used in the reaction to produce [tex]15.7 L[/tex] of [tex]O_2[/tex] gas at STP.
Learn more about equation here:
https://brainly.com/question/30087623
#SPJ9
A 250 mL flask contains air at 0.9150 atm and 21.1 °C. 5 mL of ethanol is added, the flask is immediately sealed and then warmed to 95.7 °C, during which time a small amount of the ethanol vaporizes. The final pressure in the flask (stabilized at 95.7 °C) is 2.791 atm. (Assume that the head space volume of gas in the flask remains constant).
What is the partial pressure of air, in the flask at 95,7 °C?
What is the partial pressure of the enthanol vapour in the flask at 95.7°C?
At 95.7 °C, the flask's partial pressure of air is 2.741 atm.
How is partial pressure determined?One of two methods can be used to compute partial pressures: 1) Use PV = nRT to calculate the individual pressure of each gas in a mixture. 2) Determine the proportion of pressure from the total pressure that may be assigned to each individual gas by using the mole fraction of each gas.
PV = nRT
n = PV/RT
where P = 0.9150 atm, V = 250 mL = 0.250 L, T = 21.1 °C + 273.15 = 294.25 K, and R = 0.08206 L atm/mol K.
n = (0.9150 atm)(0.250 L)/(0.08206 L atm/mol K)(294.25 K) = 0.0111 mol
n = PV/RT
where P = 0.9150 atm, V = 5 mL = 0.005 L, T = 21.1 °C + 273.15 = 294.25 K, and R = 0.08206 L atm/mol K.
n = (0.9150 atm)(0.005 L)/(0.08206 L atm/mol K)(294.25 K) = 0.000173 mol
[tex]n_total = n_air + n_ethanol = 0.0111 mol + 0.000173 mol = 0.01127 mol[/tex]
[tex]P_air = X_air * P_total[/tex]
[tex]X_air = n_air / n_total = 0.0111 mol / 0.01127 mol = 0.983[/tex]
[tex]P_air = X_air * P_total = 0.983 * 2.791 atm = 2.741 atm[/tex]
To know more about partial pressure visit:-
https://brainly.com/question/15075781
#SPJ1
What is the major organic product in the following reaction sequence? Type it’s systematic IUPAC name in the box below
The given reaction sequence suggests the use of PPh3 followed by BuLi to form a nucleophilic species that can react with 3-pentanone and Br.
The first step involves the formation of a phosphonium ylide intermediate by the reaction of PPh3 with BuLi. In the second step, the ylide acts as a nucleophile and attacks the carbonyl group of 3-pentanone to form a betaine intermediate. The final step involves the reaction of the betaine with Br to give the desired product.
The major organic product formed in this reaction sequence is (E)-1-bromo-3-(phenyl(phenyl)methylidene)butan-1-one. This is because the reaction proceeds via an SN2 mechanism, which leads to the formation of an alkene with an E configuration. The systematic IUPAC name of the product is (E)-1-bromo-3-(phenyl(phenyl)methylidene)butan-1-one.
In this name, "E" indicates the configuration of the double bond, "1-bromo" indicates the presence of a bromine atom on the first carbon, "3-(phenyl(phenyl)methylidene)" indicates the presence of a substituted phenyl group attached to the third carbon, and "butan-1-one" indicates the presence of a ketone group on the first carbon of a four-carbon chain.
The complete and correct question is :What is the major organic product in the following reaction sequence? Type its systematic IUPAC name in the box below.
1) PPh3
2) BuLi
3) 3-pentanone
Br?
To know more about nucleophile, visit:
https://brainly.com/question/30713995
#SPJ1
how to calculate and discuss how many cans of 7-UP a 70 kg adult would have to drink to reach a toxic dose. 7-UP is toxic at 12,000 mg/kg and a can is 330mL. Note that the literature value is 0.012 M
Answer:
First, we need to convert the toxicity value from mg/kg to mg for a 70 kg adult:
Toxic dose for a 70 kg adult = 12,000 mg/kg x 70 kg = 840,000 mg
Next, we need to calculate the number of moles of 7-UP in one can:
Concentration of 7-UP in one can = 0.012 M
Volume of one can = 330 mL = 0.33 L
Number of moles of 7-UP in one can = concentration x volume = 0.012 mol/L x 0.33 L = 0.00396 mol
Finally, we can calculate the number of cans of 7-UP a 70 kg adult would have to drink to reach a toxic dose:
Number of cans of 7-UP = toxic dose / (number of moles in one can x molecular weight of 7-UP)
Molecular weight of 7-UP = 338.14 g/mol
Number of cans of 7-UP = 840,000 mg / (0.00396 mol x 338.14 g/mol) ≈ 619 cans
Therefore, a 70 kg adult would have to drink approximately 619 cans of 7-UP to reach a toxic dose.
Explanation:
A thimble of water contains 4.0 x 1021 molecules. The number of moles of H₂O is:
A) 2.4 x 10^23
B) 6.6 x 10^-3.
C) 2.4 × 10^45
D) 2.4 x 10^-23
E) 6.6 x 10^-23.
The number of moles of H₂O in the thimble of water is approximately 0.00664 mol. The answer is option B) 6.6 x 10⁻³
The number of molecules in a substance is related to Avogadro's number (6.022 x 10²³ molecules/mol) by the formula:
number of molecules = number of moles x Avogadro's number
We are given that there are 4.0 x 10²¹ molecules of water. To find the number of moles of water, we need to rearrange the formula and solve for moles:
number of moles = number of molecules / Avogadro's number
number of moles = 4.0 x 10²¹ molecules / 6.022 x 10²³ molecules/mol
number of moles = 0.00664 mol
The number of moles of H₂O in the thimble of water is approximately 0.00664 mol. The answer is option B) 6.6 x 10⁻³
The quantity of substance in a system is represented by a measurement unit called a mole. A material is said to have one mole if there are exactly as many atoms, molecules, or ions in one mole of it as there are in 12 grams of carbon-12.
It is practical to quantify substance concentrations in chemical reactions and other chemical processes using moles. It enables chemists to deal with quantifiable amounts of substances, like grams, and to quickly convert these amounts to a standard unit of measurement, like moles.
learn more about moles here
https://brainly.com/question/15356425
#SPJ1
20 points!!!
10 g of pure water were added to 25 mL 9.87 M HCI solution (d=1,179 g/mL). Calculate mass fraction (%) of final solution.
The mass fraction of HCl in the final solution is 0.294%.
To calculate the mass fraction of the final solutionWe need to determine the mass of the solution after mixing the two components.
First, we need to calculate the volume of the 10 g of pure water added to the 25 mL of 9.87 M HCl solution:
Density of the HCl solution = 1.179 g/mL
Volume of the HCl solution = 25 mL = 0.025 L
Mass of the HCl solution = Density x Volume = 1.179 g/mL x 0.025 L = 0.0295 g
Volume of water added = 10 g / (1 g/mL) = 10 mL = 0.01 L
Total volume of the final solution = 25 mL + 10 mL = 35 mL = 0.035 L
To calculate the concentration of the final solution, we can use the following equation:
M1V1 = M2V2
Where
M1 is the initial concentration of the HCl solutionV1 is the volume of the HCl solutionM2 is the final concentration of the solutionV2 is the total volume of the final solutionRearranging the equation to solve for M2, we get :
M2 = (M1V1) / V2
Substituting the values we have, we get:
M2 = (9.87 mol/L x 0.025 L) / 0.035 L = 7.06 mol/L
Now, we can calculate the mass of the final solution:
Mass of the HCl solution = 0.0295 g
Mass of water added = 10 g
Total mass of the final solution = 0.0295 g + 10 g = 10.0295 g
Finally, we can calculate the mass fraction of the HCl in the final solution:
Mass fraction of HCl = (mass of HCl) / (total mass of solution) x 100%
Mass fraction of HCl = (0.0295 g / 10.0295 g) x 100% = 0.294%
Therefore, the mass fraction of HCl in the final solution is 0.294%.
Learn more about mass fraction here : brainly.com/question/14783710
#SPJ1
children reliever carfemol contains 75 mg paracetamol per 0.50 teaspoon .the dosage recommended for a child who weighs between 20 and 30ib is 1.5 teaspoon what is the range of parcetamol dosages expressed in mg paracetamol per kg body weight for children who weigh between 20 and 30
The range of paracetamol dosages expressed in mg per kg body weight for children who weigh between 20 and 30 pounds and are recommended a dosage of 1.5 teaspoons of Carfemol is between 165.5 mg/kg and 248.1 mg/kg.
What is Paracetamol?
Paracetamol, also known as acetaminophen, is a common over-the-counter pain reliever and fever reducer. It is used to treat mild to moderate pain, such as headaches, menstrual cramps, toothaches, and backaches. Paracetamol is also used to reduce fever, such as in the case of flu or common cold.
To calculate the range of paracetamol dosages expressed in mg per kg body weight for children who weigh between 20 and 30 pounds and are recommended a dosage of 1.5 teaspoons of Carfemol, we need to convert the weight of the child to kilograms and then use the dosage and concentration of paracetamol in Carfemol to calculate the dosage in mg/kg.
Converting 20 pounds to kilograms:
20 pounds = 20 / 2.205 = 9.07 kg
Converting 30 pounds to kilograms:
30 pounds = 30 / 2.205 = 13.61 kg
Using the dosage recommended for a child of 1.5 teaspoons of Carfemol, we can calculate the dosage of paracetamol for a child weighing between 20 and 30 pounds:
Dosage of paracetamol for a child weighing 9.07 kg = 1.5 teaspoons * 75 mg/0.50 teaspoons = 2,250 mg
Dosage of paracetamol for a child weighing 13.61 kg = 1.5 teaspoons * 75 mg/0.50 teaspoons = 2,250 mg
Now, we can calculate the range of paracetamol dosages expressed in mg/kg body weight:
For a child weighing 9.07 kg: 2,250 mg / 9.07 kg = 248.1 mg/kg
For a child weighing 13.61 kg: 2,250 mg / 13.61 kg = 165.5 mg/kg
Learn more about Paracetamol from given link
hhttps://brainly.com/question/23804525
#SPJ1
Consider the reaction.
2 Pb(s) + O₂(g) →→→ 2 PbO(s)
-
An excess of oxygen reacts with 451.4 g of lead, forming 338.4 g of lead(II) oxide. Calculate the percent yield of the reaction.
The percent yield of the reaction is approximately 43.6%.
To calculate the percent yield of the reactionWe need to compare the actual yield of the reaction with the theoretical yield of the reaction.
First, we need to determine the theoretical yield of the reaction, which is the amount of lead(II) oxide that would be formed if all of the lead reacted with the oxygen. We can use stoichiometry and the molar mass of each substance to calculate the theoretical yield.
The balanced chemical equation for the reaction is:
2 Pb(s) + O₂(g) → 2 PbO(s)
The molar mass of Pb is 207.2 g/mol and the molar mass of PbO is 223.2 g/mol.
From the given information, we know that 451.4 g of Pb reacted with an excess of O₂ to form 338.4 g of PbO. We can use this information to calculate the amount of PbO that would be formed if all of the Pb reacted:
451.4 g Pb × (1 mol Pb / 207.2 g Pb) × (2 mol PbO / 2 mol Pb) × (223.2 g PbO / 1 mol PbO) = 776.8 g PbO
So, the theoretical yield of PbO is 776.8 g.
Now, we can calculate the percent yield of the reaction:
Percent yield = (actual yield / theoretical yield) × 100%
From the given information, the actual yield is 338.4 g of PbO.
Percent yield = (338.4 g / 776.8 g) × 100% ≈ 43.6%
Therefore, the percent yield of the reaction is approximately 43.6%.
Learn more about percent yield here : brainly.com/question/2451706
#SPJ1
Substances at Different Temperatures
Substance 33°F 100°F
Peanut Oil solid liquid
Margarine solid liquid
Chocolate Chips solid liquid
Based on the data table, what is a likely effect of adding heat to a solid?
A.
The solid will freeze.
B.
The solid will melt.
C.
The solid will evaporate.
D.
the solid will boil.
Answer:Adding heat to a solid will definitely melt it.
Example: let's say we have a pack of Hershey's chocolate we take it and leave it outside in the heat.what will happen to it? it will melt 100%
the majority of solids melt. It depends on how solid it is.
Example 2 scenario: lets say we have a penny (a solid) it will melt but with a much higher temperature
the melting temperature for the penny is 1984.32 °F which is extremely high.
lets go back to the previous chocolate example--->
before the chocolate melted it wasnt as hard as the penny. the melting temperature would be much lower compared to the penny. the melting temperature for chocolate is 85°F-93°F.
Why do harder solids have a higher melting point than less-hard solids?
the reason for this is density. The penny is much dense than the chocolate.
How is a penny more dense than chocolate?
lets say we have chocolate (before it melted it was a solid) we are able to actually bite and chew the chocolate; but you are unable to bite and chew a copper coin. the reason for this is that copper is much more dense than chocolate.
it will NOT evaporate because the temperature for liquid evaporation is 212° F.
I hope this helps!!!
In the reaction shown, what action will result in making the solution more green?
A: Adding MnO₄⁻² ions
B: Diluting the solution by adding water
C: Removing MnO₄⁻¹ ions
D: Increasing the temperature of the solution
Adding MnO₄⁻² ions will result in making the solution more green in this reaction.
What is Temperature?
Temperature is a measure of the average kinetic energy of the particles in a substance or system. It is typically measured using a scale such as Celsius, Fahrenheit, or Kelvin, and is commonly used in physics, chemistry, and engineering to describe the behavior of materials and systems.
In this reaction, the MnO₂ react with I⁻ ions to form MnO₄⁻¹ ions and MnO₂. The MnO₄⁻¹ ions are green in color, while the MnO₂ is purple in color. Therefore, the overall color of the solution is a mixture of green and purple.
By adding more MnO₄⁻² ions to the solution, the concentration of green MnO₄⁻¹ ions will increase, and this will result in a more green color of the solution. Hence, option A is the correct answer.
Learn more about Temperature from the given link
https://brainly.com/question/26866637
#SPJ1