the density of air at moderate altitude on earth is 1 kg/m3 (this can be converted to 0.001 g/cm3). the density of the atmosphere near mars' surface is 0.02 kg/m3. how many m3 of mars atmosphere would it take to collect a mass of 1kg, the same mass as in one m3 on earth? group of answer choices

Answers

Answer 1

Option C, It would take 50 m³ of Mars' atmosphere to collect the same mass of air as one m³ on Earth. To calculate the volume of Mars' atmosphere required to collect a mass of 1kg, we need to use the density of the Martian atmosphere and the mass of the air on Earth.

The density of air at moderate altitude on Earth is given as 1 kg/m3. This means that 1 cubic meter of air on Earth has a mass of 1 kg. To convert this to grams per cubic centimeter, we can divide by 1000, which gives 0.001 g/cm3.

The mass of air in one m³ on Earth is 1 kg, while the density of the atmosphere near Mars' surface is 0.02 kg/m³. Therefore, to collect 1 kg of Mars' atmosphere, we need:

1 kg / 0.02 kg/m³ = 50 m³

So, it would take 50 m³ of Mars' atmosphere to collect the same mass of air as one m³ on Earth.

Complete question -

The density of air at moderate altitude on earth is 1 kg/m3 (this can be converted to 0.001 g/cm3). the density of the atmosphere near mars' surface is 0.02 kg/m3. how many m3 of mars atmosphere would it take to collect a mass of 1kg, the same mass as in one m3 on earth?

A. 1

B. 10

C. 50

D. 100

To know more about the density of air

brainly.com/question/30075980

#SPJ4


Related Questions

in an alternating current circuit that contains a resistor a inductor and a capacitor with 120v how do you find current

Answers

In an alternating current circuit that contains a resistor, an inductor, and a capacitor with 120V, you can find the current by using Ohm's Law.

Ohm's Law states that the current is equal to the voltage divided by the resistance.

To calculate the resistance in an alternating current circuit, you must take into account the resistor, inductor, and capacitor.

For example, if the resistor has a resistance of 10 ohms, the inductor has a resistance of 5 ohms, and the capacitor has a resistance of 20 ohms, then the total resistance would be 35 ohms.

Therefore, the current in the circuit would be 120V/35 ohms = 3.43A.

To know more about Ohm's Law, refer here:

https://brainly.com/question/1247379#

#SPJ11

How far apart are two charges if you know they each, are +2.0 C and the force between them is 8.5•10^8 N

Answers

The two charges would be 219.1 meters apart.

Distance between two charges

The force between two charges is given by Coulomb's Law:

F = k * (q1 * q2) / r^2

where F is the force, k is the Coulomb constant (9.0 x 10^9 N*m^2/C^2), q1 and q2 are the magnitudes of the charges, and r is the distance between the charges.

In this case, we have two charges with a magnitude of +2.0 C each and a force of 8.5 x 10^8 N between them. Substituting these values into Coulomb's Law, we get:

8.5 x 10^8 N = (9.0 x 10^9 N*m^2/C^2) * [(2.0 C)^2 / r^2]

Simplifying this expression, we get:

r^2 = [(2.0 C)^2 * (9.0 x 10^9 N*m^2/C^2)] / (8.5 x 10^8 N)

r^2 = 4.8 x 10^4 m^2

Taking the square root of both sides, we get:

r = 219.1 meters

Therefore, the two charges are 219.1 meters apart.

More on the distance between two charges can be found here: https://brainly.com/question/30654342

#SPJ1

if a 4.5 kg object is dropped from a height of 6.0 m, what will be its velocity when it is halfway toward the ground? (use g

Answers

The final answer are velocity of the object when it is midway to the ground is : v  = u + at v = 0 + 9.81 x 0.78v = 7.658 m/s= 8.77 m/s (rounded to two decimal places)

At the midpoint, the velocity of the 4.5 kg item dropped from a height of 6.0 m is 8.77 m/s (use g = 9.81 m/s^2).

The weight of the object is the force acting on it that is proportional to its mass. The weight is represented by the formula W=mg. W = 4.5 x 9.81 m/s²W = 44.145 N, where N is the newton.

The object's initial velocity is zero, and it starts to fall. The speed of an object moving with constant acceleration is given by the formula v = u + at, where u is the initial velocity, t is the time taken, and a is the acceleration.

In this instance, the initial velocity u = 0. If the distance is halved, the time taken to reach the midpoint can be computed as follows: t = sqrt (2s / g)t = sqrt (2 x 3 / 9.81)t = sqrt (0.611) t = 0.78 s

The velocity of the object when it is midway to the ground is : v  = u + at v = 0 + 9.81 x 0.78v = 7.658 m/s= 8.77 m/s (rounded to two decimal places)

To know more about velocity refer here:

https://brainly.com/question/17127206#

#SPJ11

Convert the following to Fahrenheit 1) 10° C 50 °F = 1.8 x 10 +32 2) 30° C 3) 40° C​

Answers

The corresponding temperature in Fahrenheit is 10° C = 50° F, 30° C = 86° F and 40° C = 104° F.

What is the corresponding temperature in Fahrenheit?

In the Celsius temperature scale, water freezes at 0°C and boils at 100°C, while in the Fahrenheit temperature scale, water freezes at 32°F and boils at 212°F.

The conversion formula for Celsius to Fahrenheit is F = 1.8 x C + 32, where;

F is the temperature in Fahrenheit and C is the temperature in Celsius.

So, to convert Celsius to Fahrenheit, we simply need to plug in the given Celsius temperature value into the formula F = 1.8 x C + 32, and then solve for F.

Let's take the first example of 10°C:

F = 1.8 x C + 32

F = 1.8 x 10 + 32

F = 18 + 32

F = 50°F

Therefore, 10°C is equivalent to 50°F in Fahrenheit.

Similarly, we can apply this formula to the other given Celsius temperature values of 30°C and 40°C to convert them to Fahrenheit.

30° C = 86° F (F = 1.8 x 30 + 32)

40° C = 104° F (F = 1.8 x 40 + 32)

Learn more about Fahrenheit temperature here: https://brainly.com/question/30391112

#SPJ1

a rock is thrown upward with a velocity of 13 meters per second from the top of a 38 meter high cliff, and it misses the cliff on the way back down. when will the rock be 11 meters from ground level? round your answer to two decimal places.

Answers

The rock will be 11 meters from the ground 2.97 seconds after it is thrown.

Let's start by using the kinematic equation,

h = vit + 0.5a*t^2

where h is the height, vi is the initial velocity, t is the time, and a is the acceleration due to gravity (-9.8 m/s^2).

At the highest point, the rock's velocity will be zero, so we can use this fact to find the time it takes to reach the highest point,

0 = 13 - 9.8*t_highest

t_highest = 1.33 seconds

Now we can use this time to find the height of the rock above the ground,

h = 38 + 131.33 - 0.59.8*(1.33)^2

h = 51.33 meters

So at its maximum height, the rock is 51.33 meters above the ground. To find when it will be 11 meters from the ground,

11 = 51.33 + 0 + 0.5*(-9.8)*t^2

t^2 = (51.33 - 11)/4.9

t^2 = 8.8367

t = 2.97 seconds (rounded to two decimal places)

To know more about velocity, here

brainly.com/question/17333324

#SPJ4

A 5. 00-kg box slides across a rough horizontal floor, initially at 2. 50 m/s. If friction brings
the box to rest after 1. 50 s, determine the magnitude of the average rate in watts at which
friction dissipates the block’s mechanical energy

Answers

The magnitude of the average rate in watts at which friction dissipates the box's mechanical energy is 10.4 W.

KE = 1/2 mv²

KE = 1/2 (5.00 kg) (2.50 m/s)² = 15.6 J

Since the box comes to rest after 1.50 s, the average power dissipated by friction can be found using the equation:

P = E/t

P = 15.6 J / 1.50 s = 10.4 W

Mechanical energy is the sum of the potential energy and kinetic energy of an object. Potential energy is the energy that an object possesses by virtue of its position or configuration in a field of force, while kinetic energy is the energy that an object possesses by virtue of its motion.

The mechanical energy of an object is conserved when it is in a closed system, meaning that the total amount of mechanical energy remains constant. This is known as the law of conservation of mechanical energy. For example, if an object is dropped from a height, its potential energy is converted into kinetic energy as it falls, and the total mechanical energy remains constant. Mechanical energy plays an important role in many areas of physics, including mechanics, thermodynamics, and electromagnetism.

To know more about Mechanical energy visit here:

brainly.com/question/29509191

#SPJ4

which of the following have wavelengths that are longer than visible light? question 3 options: 1) gamma rays 2) ultraviolet (uv) light 3) infrared radiation 4) x rays 5) a, b, and d

Answers

All of the following have wavelengths that are longer than visible light: Gamma Rays, Ultraviolet (UV) Light, Infrared Radiation, and X Rays (A, B, and D).

Gamma Rays have the shortest wavelength of all four, with a range of 10 picometers to 0.01 nanometers. Ultraviolet (UV) Light has a range of 10 nanometers to 400 nanometers. Infrared Radiation has a range of 700 nanometers to 1 millimeter. Finally, X Rays have a range of 0.01 nanometers to 10 nanometers.
All four of these forms of radiation are used for various applications, such as medical imaging and astronomical observations. Gamma Rays are used for medical imaging, such as PET scans, and are also used to study the structure of atoms and molecules. Ultraviolet (UV) Light is used in tanning beds and is also used to detect organic compounds in astronomical observations. Infrared Radiation is used to detect objects in the sky, such as stars and planets, as well as to detect gas clouds. Finally, X Rays are used in medical imaging, such as CT scans, and are also used to study the structure of atoms and molecules.  

In conclusion, Gamma Rays, Ultraviolet (UV) Light, Infrared Radiation, and X Rays all have wavelengths that are longer than visible light.

For more such questions on Wavelengths.

https://brainly.com/question/12037899#

#SPJ11

gold has a specific gravity of almost 20. a 5-gallon bucket of water weighs 40 pounds. how much would a 5-gallon bucket of gold weigh? hint: if a mineral were twice as dense as water, its specific gravity would be two. water has a specific gravity of 1.

Answers

A 5-gallon bucket of gold would weigh 86.84 pounds.

A five-gallon bucket of water weighs 40 pounds. Gold has a specific gravity of almost 20.

If a mineral was twice as dense as water, its specific gravity would be two.

Water has a specific gravity of 1.

To determine the weight of a 5-gallon bucket of gold, you need to determine the weight of 5 gallons of water first.One gallon of water weighs approximately 8.33 pounds; hence 5 gallons of water weigh 41.65 pounds.

Now, divide the weight of 5 gallons of water (41.65) by the specific gravity of gold (20):41.65/20 = 2.0825

The weight of a five-gallon bucket of gold would be 2.0825 times greater than that of a five-gallon bucket of water, which equals to 86.84 pounds (40 pounds + 46.84 pounds).

Therefore, a 5-gallon bucket of gold would weigh approximately 86.84 pounds.

To learn more about specific gravity:

https://brainly.com/question/9638888#

#SPJ11

for a resistor, what resistance corresponds to a short circuit? for an uncharged capacitor, what value capacitance corresponds to a short circuit? explain your answers. repeat for an open circuit.

Answers

Zero resistance or capacitance value corresponds to a short circuit, which is the travel of current along an unintended path.

True short circuits happen when electrical circuit wires or wire connections are exposed or broken; they need to be identified and addressed as soon as possible. When there is a low resistance connection between two conductors supplying electricity to a circuit, a short circuit happens.

A "ideal" open circuit would have zero capacitance. A capacitor with 0 capacitance has no electrical charge accumulating on its plates or conductors. Zero capacitance means it can become fully charged as soon as the current is flown through it.

The capacitance C of a capacitor is defined as the ratio of the maximum charge Q that may be held in a capacitor to the applied voltage V across its plates. In other terms, capacitance is the capacity of the device to store the most charge per volt:

C = Q/V.

To know more about capacitance, refer:

https://brainly.com/question/25656682

#SPJ4

A 2000 kg car traveling at a speed of 37 m/s skids to a halt on wet concrete where μk
= 0.50.

Answers

Stopping distance of a 2000 kg car traveling at 37 m/s on wet concrete with μk = 0.50 is 141.95 meters.

How to calculate stopping distance?

To solve this problem, we need to use the formula for the stopping distance of a car on a slippery surface:

d = (v² / 2μk g)

where:

v - is the car's initial velocity.

d - is the stopping distance

μk - is the coefficient of kinetic friction between the car's tires and the road surface

g - is the acceleration due to gravity (9.81 m/s²)

Substituting the given values, we get:

d = (37² / (2 * 0.50 * 9.81)) = 141.95 meters

Therefore, the stopping distance of the car is 141.95 meters.

To learn more about Stopping distance, visit:

https://brainly.com/question/14412650

#SPJ1

Complete question:

A 2000 kg car traveling at a speed of 37 m/s skids to a halt on wet concrete where μk = 0.50. What is Stopping distance?

what is the angular momentum of a 0.205 kg k g ball rotating on the end of a thin string in a circle of radius 1.45 m m at an angular speed of 11.6 rad/s r a d / s ?

Answers

The angular momentum of the ball rotating on the end of a thin string in a circle of radius 1.45 m m at an angular speed of 11.6 rad/s r a d / s is 6.07 × 10⁻⁶ kg m²/s.

Angular momentum is the quantity of motion that describes the rotation of a body about a fixed axis. It is a vector quantity that is the cross product of the position vector and the momentum vector.

The angular momentum of a 0.205 kg k g ball rotating on the end of a thin string in a circle of radius 1.45 m m at an angular speed of 11.6 rad/s r a d / s can be calculated as follows:

L = IωL = Iω

Here, L is angular momentum,

I is the moment of inertia of the ball, and

ω is the angular velocity of the ball.

The moment of inertia of a uniform sphere can be calculated as follows:

I= (2/5)mr²I = (2/5)mr²

Here, m is the mass of the sphere, and r is the radius of the sphere.

Therefore, the moment of inertia of the ball is given by:

I = (2/5)mr²I = (2/5) × 0.205 × (0.00145)²I = 5.23 × 10⁻⁷ kg m²

Substituting this value into the expression for angular momentum:

L = IωL = 5.23 × 10⁻⁷ × 11.6L = 6.07 × 10⁻⁶ kg m²/s.

for such more question on angular momentum

https://brainly.com/question/4126751

#SPJ11

the grand coulee dam is 1270. m long and 170. m high. the electrical power output from generators at its base is approximately 2000. mw. how many cubic meters of water must flow from the top of the dam per second to produce this amount of power if 92% of the work done on the water by gravity is converted to electrical energy? (each cubic meter of water has a mass of 1000. kg .)

Answers

Hence, 127.2 m3/s per second is the required water flow rate from the dam's crest.

What is a second?

A international unit system (SI) defines the metre per second as the speed of the a body covering a metre in one second, which is measured in terms of the both speed (a scalar number) and speed (a vector quantity with direction and magnitude). m/s, m/s1, m/s, or ms are the SI unit symbols.

How do you calculate a second?

Distance times time is the same for all objects, including cars, when calculating speed and distance. So, a math becomes (60 x 5280) (60 x 60) ≈ 88 meters per second when trying to figure out how fast an automobile is traveling at 60 miles per hour.

To know more about per second visit:

https://brainly.com/question/17125529

#SPJ1

(1 points) resistance of a wire is quantified by r. the wire is stretched to double its length, but the material maintains the same density. what is the new resistance in r?

Answers

The resistance of a wire is quantified by r. The wire is stretched to double its length, but the material maintains the same density.

When a wire's length is doubled, its resistance is doubled as well. When a wire's thickness is doubled, its resistance is decreased to one-half of its previous value. The formula for wire resistance is given by the following equation:

R = ρL / A

Since the wire's density is constant, the resistance is proportional to the wire's length and inverse to the cross-sectional area. As a result, doubling the wire's length would double its resistance.

So the new resistance in r would be twice the previous resistance, which is R.

Mathematically,

[tex]R_2[/tex] = 2R where R is the previous resistance of the wire.

Learn more about resistance at:

brainly.com/question/29038879

#SPJ11

if a test point is marked 5 volts and a sedond test point is marked -3.3 volts. what voltage would you expect to read between the two points if the refernece lead is on the lowest voltage

Answers

The 5-volt reading we can expect between the two test points if the reference lead is on the lowest voltage.

The given data is as follows:

The first test marked voltage = 5 volts

The second test marked voltage = -3.3 volts

Let us assume that the two test points are there is a conductive track between them, the voltage between the two points can be calculated using the voltage difference between the two test points.

The voltage difference between the  two test points is calculated as:

5 volts - (-3.3 volts) = 8.3 volts

If the reference lead is on the lowest voltage, It means that the negative side of the voltmeter is attached to the test point with the lower voltage which is -3.3 volts.

The voltage difference between the  two test points is

8.3 volts - 3.3 volts = 5 volts

Therefore we can conclude that the 5-volt reading we can expect between the two test points.

To learn more about voltage

https://brainly.com/question/14291865

#SPJ4

Seventh grade QQ.4 Commas with coordinate adjectives 5L5
Insert one comma to separate the coordinate adjectives.
Typical golf caddie responsibilities include carrying clubs, cleaning balls,
calculating distances and scores, and even replacing the divots-pieces of
grass and dirt that have been cut loose by the swift forceful strikes of golf
clubs.

Answers

Answer:

Typical golf caddie responsibilities include carrying clubs, cleaning balls,

calculating distances and scores, and even replacing the divots - pieces of

grass and dirt that have been cut loose by the swift, forceful strikes of golf

clubs.

and object is placed 16cm from a convex lens that has a focal length of 4cm. if the image is located at 5.33 cm high, how tall is the image?

Answers

The height of the image is approximately 1.066 cm, and since it is negative, it means that the image is inverted and smaller than the object.

Using the thin lens equation:

1/f = 1/d_o + 1/d_i

where f is the focal length of the lens, d_o is the object distance, and d_i is the image distance.

Plugging in the given values, we get:

1/4 = 1/16 + 1/d_i

Solving for d_i, we get:

d_i = 3.2 cm

Using the magnification equation:

m = -d_i/d_o

where m is the magnification of the image.

Plugging in the given values, we get:

m = -3.2/16 = -0.2

Since the magnification is negative, the image is inverted.

Finally, using the equation:

m = h_i/h_o

where h_i is the height of the image, and h_o is the height of the object.

Plugging in the given values and solving for h_i, we get:

h_i = m * h_o = (-0.2) * 5.33 cm = -1.066 cm

Therefore, the height of the image is approximately 1.066 cm, and since it is negative, it means that the image is inverted and smaller than the object.

What is magnification of lens?

The magnification of a lens is a measure of how much larger or smaller an image appears relative to the object that is being viewed through the lens. It is the ratio of the height of the image formed by the lens to the height of the object.

To know more about lens, visit:

https://brainly.com/question/29834071

#SPJ1

What process is water vapor released into the atmosphere?

Answers

Answer:Evaporation

Explanation:

how many nuclear reactor incidents have been studied to determine the stoachasitc effects on the workers and exposed population

Answers

Nuclear reactor incidents have been studied in hundreds to determine the stochastic effects on the workers and exposed population.

The stochastic effect refers to radiation-induced effects that may occur in tissues or cells and that are subject to probabilistic relationships between exposure and reaction. The probability of developing cancer increases as a result of exposure to radiation. The greater the exposure dose, the greater the likelihood of developing cancer.The stochastic effect can occur even at low radiation doses.

This is opposed to deterministic effects, which only occur when a particular radiation dose threshold is surpassed. Stochastic effects are also referred to as random or probabilistic effects. They can happen in any tissue or organ in the body, including reproductive cells, which can lead to heritable genetic mutations. The probability of developing cancer increases as the radiation dose rises.

Know more about Nuclear reactor    here:

https://brainly.com/question/14400638

#SPJ11

A net force of 200 N acts on a 100-kg boulder, and a force of thesame magnitude acts on a 130-g pebble. How does the rate of changeof the boulder’s momentum compare to the rate of change ofthe pebble’s momentum?
a. greater than
b. less than
c.equal to

Answers

The rate of change of the boulder's momentum is equal to the rate of change of the pebble's momentum. Option C is correct.

This is because the rate of change of an object's momentum is directly proportional to the net force acting on the object, and inversely proportional to the mass of the object. In this case, the net force acting on both the boulder and the pebble is the same, at 200 N. However, the mass of the boulder is much larger than the mass of the pebble.

Since the rate of change of momentum is inversely proportional to the mass of the object, the boulder will experience a smaller rate of change in momentum than the pebble. However, this will be exactly offset by the fact that the boulder has a larger mass, which will cause its momentum to change at the same rate as the pebble.

Therefore, the rate of change of the boulder's momentum is equal to the rate of change of the pebble's momentum, despite the large difference in their masses. The principle behind the rate of change of momentum is that the amount of momentum an object has is directly proportional to its mass and velocity. When a net force acts on an object, it causes the object's velocity to change, which in turn causes a change in the object's momentum.

The rate of change of an object's momentum is determined by the net force acting on the object, as well as its mass. Specifically, the rate of change of momentum is equal to the net force acting on the object divided by its mass. This principle is known as Newton's second law of motion.

In the case of the boulder and the pebble in the original question, both objects are subject to the same net force of 200 N. However, the boulder has a mass of 100 kg, while the pebble has a mass of 0.13 kg. Since the rate of change of momentum is inversely proportional to the mass of the object, the pebble will experience a much larger rate of change in momentum than the boulder. Option C is correct.

To know more about the Momentum, here

https://brainly.com/question/30890791

#SPJ4

Two loud speakers are 1.60 m apart. A person stands 3.00 m from one speaker and 3.50 m from other speaker.
What is the lowest frequency at which destructive interference will occur at this point if the speakers are in phase?

Answers

Answer:

f = 343 Hz

Step by step explanation:

For destructive interference to occur, the sound waves from the two speakers must be out of phase by half a wavelength. This means that the path difference between the two waves must be an odd multiple of half the wavelength.

In this case, the path difference between the two waves is given by:
Δx = d₂ - d₁
where d₂ is the distance from the second speaker to the person, and d₁ is the distance from the first speaker to the person.

Substituting the given values, we get:
Δx = 3.5 m - 3.0 m
Δx = 0.5 m

For destructive interference to occur, the path difference must be an odd multiple of half the wavelength, i.e.:
Δx = (2n + 1)λ/2
where n is an integer.

Solving for the wavelength, we get:
λ = 2Δx/(2n + 1)

The lowest frequency occurs when n is the smallest possible value, i.e. n = 0. Substituting this value, we get:
λ = 2Δx/1
λ = 2(0.5 m)
λ = 1.00 m

The frequency of the sound wave is given by:
f = c/λ
where c is the speed of sound in air (approximately 343 m/s).

Substituting the values, we get:
f = 343 m/s/1.00 m
f = 343 Hz

Therefore, the lowest frequency at which destructive interference will occur at the given point is 343 Hz.

a particle travels 17 times around a 16-cm radius circle in 38 seconds. what is the average speed (in m/s) of the particle?

Answers

A particle travels 17 times around a 16-cm radius circle in 38 seconds.The average speed of the particle is approximately 14.21 m/s.

The particle's average speed can be calculated by dividing the distance travelled by the time taken.

The distance travelled by the particle is equal to the circumference of the circle, which is given by 2πr, where r is the radius of the circle. Therefore, the distance travelled by the particle is given by:

Distance travelled = 17 × 2π × 16 cm

                               = 17 × 32π cm

The time taken by the particle to travel this distance is given as 38 seconds.Therefore, the average speed of the particle is given by:

Average speed = Distance travelled /Time taken

                          = (17 × 32π) cm/38 s

                          = 17 × 32 × π/38 m/s

                          = 14.21 m/s (rounded to two decimal places).

for such more question on average speed

https://brainly.com/question/6504879

#SPJ11

according to our textbook, what is the best way to defend ourselves against an asteroid which is on course to collide with the earth in 7 years?

Answers

If an asteroid is on a collision course with Earth and is predicted to collide within seven years, the best way to defend ourselves would depend on the size and trajectory of the asteroid.

What is an asteroid ?

An asteroid is a small, rocky object that orbits the Sun. Most asteroids are found in the asteroid belt, a region between the orbits of Mars and Jupiter. Asteroids can range in size from a few meters to several hundred kilometers in diameter, with the largest known asteroid being Ceres.

Most asteroids are located in the asteroid belt between Mars and Jupiter, but they can also be found in other parts of the solar system. Some asteroids have orbits that cross the orbit of Earth, and these are known as near-Earth asteroids (NEAs). NEAs are of particular interest because they have the potential to collide with Earth, which could have significant consequences for life on our planet.

Asteroids are believed to be remnants from the early solar system, and their study can provide insights into the formation and evolution of the solar system. In recent years, several space missions have been launched to study asteroids up close, including NASA's OSIRIS-REx mission to asteroid Bennu and the Japanese space.

To know more about Asteroids visit :

https://brainly.com/question/19161842

#SPJ1

What must happen to form a solution?A.A substance must dissolve in another substance.B.A solvent must change into a solute.C.All compounds within a material must be identical.D.Two substances must combine chemically.

Answers

D. Two substances must combine chemically.

What exactly are an element or compound?

One type of atom makes up an element, which is a white crystalline solid that cannot be divided into more than one component. Compounds are pure substances created by mixing two or more substances in a specific mass ratio.

Exists a compound for each element?

Chemically pure substances that can be found in nature are called elements and compounds. An component is an object made of the same kinds of atoms as a compound, which is how they differ from one another.

It is common for the disorder to develop and the entropy of the system to increase as a result of the dispersion of molecules, atoms, and ions of one sort during the creation of a solution throughout a second substance.

To know more about Compound visit:

brainly.com/question/19458442

#SPJ1

how could apply the mechanics of sound wave production from a guitar string to construct a simple model for human vocal cords?

Answers

To apply the mechanics of sound wave production from a guitar string to construct a simple model for human vocal cords, we need to consider the vibration and resonance of both. The vibration of a guitar string and the vocal cords is similar because they both produce sound by vibrating back and forth.

What is the mechanics of sound wave production?

The mechanics of sound wave production are the generation and propagation of sound waves through space. When a guitar string vibrates, it generates sound waves that travel through the air and reach our ears. The frequency and amplitude of the sound waves determine the pitch and volume of the sound.

Take a long, thin piece of material, such as a rubber band or a strip of plastic.2. Stretch it taut between two points, such as two pencils or two pegs.3. Pluck the string with your finger and observe the vibration.4. Vary the tension and length of the string to produce different pitches.

Read more about sound :

https://brainly.com/question/1199084

#SPJ11

Three infinite straight wires are fixed in place and aligned parallel to the z-axis as shown. The wire at (x,y) = (-15.5 cm, 0) carries current l1-3.4 A in the negative z-direction. The wire at (x,y) (15.5 cm, 0) carries current I2 = 0.5 A in the positive z-direction. The wire at (x.y) = (0, 26.8 cm) carries current I3 = 5.2 A in the positive z-direction. 1. What is Bx(0,0), the x-component of the magnetic field produced by these three wires at the origin? 2). What is By(0,0), the y-component of the magnetic field produced by these three wires at the origin? 3). What is Fx(1), the x-component of the force exerted on a one meter length of the wire carrying current I1? 4). What is Fyl), the y-component of the force exerted on a one meter length of the wire carrying current I1?
5). What is Fx(2), the x-component of the force exerted on a one meter length of the wire carrying current l2?

Answers

The x-component of the magnetic field produced by these three wires at the origin, Bx(0,0), is equal to zero since the wires are aligned parallel to the z-axis.

The y-component of the magnetic field produced by these three wires at the origin, By(0,0), is equal to μ0/2π times the sum of the currents, or 0.8 x 10-7 T.

The x-component of the force exerted on a one meter length of the wire carrying current I1, Fx(1), is equal to the product of the current, I1, and the y-component of the magnetic field, By(0,0). This is equal to -2.7 x 10-7 N.

The y-component of the force exerted on a one meter length of the wire carrying current I1, Fy(1), is equal to the product of the current, I1, and the x-component of the magnetic field, Bx(0,0). Since Bx(0,0) is equal to zero, the force is equal to zero.

The x-component of the force exerted on a one meter length of the wire carrying current I2, Fx(2), is equal to the product of the current, I2, and the y-component of the magnetic field, By(0,0). This is equal to 0.4 x 10-7 N.

In conclusion, the x-component of the magnetic field produced by these three wires at the origin, Bx(0,0), is equal to zero. The y-component of the magnetic field produced by these three wires at the origin, By(0,0), is equal to 0.8 x 10-7 T.

The x-component of the force exerted on a one meter length of the wire carrying current I1, Fx(1), is equal to -2.7 x 10-7 N. The y-component of the force exerted on a one meter length of the wire carrying current I1, Fy(1), is equal to zero. The x-component of the force exerted on a one meter length of the wire carrying current I2, Fx(2), is equal to 0.4 x 10-7 N.

Know more about magnetic field here

https://brainly.com/question/23096032#

#SPJ11

Questions are in photo. Need actual answers and worked out. Pls and thank you.

Answers

Based on the above,  3.75 x 10¹² electrons have been added to the glass rod.

What is the electrons about?

To determine the number of electrons added to the glass rod, we need to know the charge of a single electron. One electron has a charge of -1.6 x 10⁻¹⁹ C.

Charge added to the glass rod = -0.6 μC = -0.6 x 10-⁶ C

Number of electrons added to the glass rod = (charge added to the rod) / (charge of a single electron)

Number of electrons added to the glass rod = (-0.6 x 10⁻⁶ C) / (-1.6 x 10⁻¹⁹C) = 3.75 x 10¹² electrons

Therefore, 3.75 x 10¹² electrons have been added to the glass rod.

For the second question, we can use Coulomb's law to determine whether the pith ball and metal plate are attracted or repulsed. Coulomb's law states that the force between two point charges is proportional to the product of their charges and inversely proportional to the square of the distance between them where

The force between the pith ball and the metal plate is:

F = k x q1 x  q2 / r²

Pugging the value in the formula, the answer will be:  F = -0.135 N.

The negative sign indicates that the force is attractive, so the pith ball and metal plate are attracted to each other.

For the third question, the force on the negatively charged object from problem 2 is 0.135 N, in the direction towards the positively charged pith ball.

For the fourth question, the force on the positively charged object from problem 2 is also 0.135 N, in the direction towards the negatively charged metal plate.

Read more about electrons here:

https://brainly.com/question/860094

#SPJ1

See text below

You rub a glass rod with a piece of fur. If the rod now has a charge of -0.6 μC, how many electrons have been added to the rod?

A suspended pith ball possessing +10 μC of charge is placed 0.02 m away from a metal 'plate possessing -6 μC of charge. Are these objects attracted or repulsed?

What is the force on the negatively charged object from problem 2?

• What is the force on the positively charged object from problem 2?

suupose that an aircraft's take-off speed is 120 moh at sea level.. what would be the take off speed for this aircraft at denver?

Answers

The takeoff speed for this aircraft at Denver would be approximately 116.85 moh if the speed of takeoff of the aircraft at sea level is 120 moh.

When an aircraft takes off, the atmosphere has a significant impact on its speed. In Denver, the air is thinner than at sea level, and the aircraft's takeoff speed must be adjusted as a result. As altitude rises, air density decreases, so the aircraft's takeoff speed must be increased to compensate.The formula for calculating takeoff speed with respect to altitude is given below:

Takeoff speed at altitude h = Takeoff speed at sea level x √(air density at altitude h / air density at sea level)

We know that the takeoff speed at sea level is 120 moh. Let us assume that air density at Denver is 0.91 times the air density at sea level.Hence, the takeoff speed at Denver can be calculated as:

Takeoff speed at Denver = 120 x √(0.91)≈ 116.85 moh.

Therefore, the takeoff speed for this aircraft at Denver would be approximately 116.85 moh.

More on speed: https://brainly.com/question/13031231

#SPJ11

g a cat with mass 4.50 kg is running at a speed of 6.70 m/s. what is the kinetic energy of the cat?

Answers

The kinetic energy of the cat is 177.15 Joules.

The kinetic energy of the cat can be calculated using the formula K = 0.5mv2, where m is the mass and v is the velocity.

The cat has a mass of 4.50 kg and is running at a velocity of 6.70 m/s, so we can substitute these values into the formula to find the kinetic energy:

K = 0.5 * 4.50 kg * (6.70 m/s)2

K = 177.15 Joules

Kinetic energy is the energy possessed by an object due to its motion. It is calculated by multiplying half of the object's mass by its velocity squared.

The cat has a mass of 4.50 kg and is running at a velocity of 6.70 m/s, so its kinetic energy is 177.15 Joules.

to know more about kinetic energy refer here:

https://brainly.com/question/26472013#

#SPJ11

numeade how much work does a supermarket checkout attendant do on a can of soup he pushes 0.600 m horizontally with a force of 5.00 n?

Answers

Work done on the can of soup by the attendant is 3J.

A supermarket checkout attendant can do a considerable amount of work on a can of soup when they apply a force of 5.00 N over a distance of 0.600 m.

Work is defined as the product of force and displacement and is calculated by multiplying the force applied (5.00 N) by the distance moved (0.600 m). Therefore, the work done on the can of soup is:

5.00 N * 0.600 m = 3.00 Nm.


To understand this concept further, it's important to know that the unit of work, joule (J), is equal to 1 Newton meter (Nm). So, the 3.00 Nm of work done on the can of soup is also equal to 3.00 J.


The amount of work done on the can of soup by the checkout attendant is directly proportional to the amount of force and displacement applied. If either of the two is increased, then the total work done will increase.

For example, if the checkout attendant applies a force of 10.00 N over a distance of 0.600 m, then the total work done will be 10.00 N * 0.600 m = 6.00 Nm, or 6.00 J.


In conclusion, a supermarket checkout attendant can do a considerable amount of work on a can of soup when they apply a force of 5.00 N over a distance of 0.600 m. This work is equal to 3.00 Nm or 3.00 J.

To know more about work, refer here:

https://brainly.com/question/13662169#

#SPJ1

a woman stands on a scale in a moving elevator. her mass is 66.0 kg, and the combined mass of the elevator and scale is an additional 784 kg. starting from rest, the elevator accelerates upward. during the acceleration, the hoisting cable applies a force of 9030 n. what does the scale read (in n) during the acceleration?

Answers

The scale will read 8,996 N during the acceleration.

The force applied to the woman by the scale is the sum of her weight and the weight of the elevator and scale (66.0 kg + 784 kg = 850.0 kg). This can be calculated using the equation

Force = Mass x Acceleration (F = ma).

The acceleration is given by the force applied (9030 N) divided by the total mass (850.0 kg), which gives a result of 10.6 m/s2.

We then multiply this acceleration by the mass of the woman (66.0 kg) to get the force applied to the woman by the scale, which is 696 N.

We then add this to the weight of the elevator and scale (784 kg) to get the total force that the scale reads, which is 8,996 N.

To know more about Force click on below link:

https://brainly.com/question/13191643#

#SPJ11

Other Questions
Write the equation y - 6 = -5(x + 1) inslope-intercept form. man buys a car for $20,000 with a $2,000 down payment at purchase. he pays for the car in 30 equal monthly payments with interest at 12% per year compounded monthly. what is his monthly payment Which statement best describes excerpt from Incident at Valley Forge? 1. The scene focuses on the life and times of General Nathanael Greenes character. 2. The scene comments on the struggles of Americans of all time periods. 3. The scene provides a dramatic interpretation of past events. 4. The scene tells a war story based on the authors own experiences. PLEASE HELP MEEEEEEEEEEE!What is the measure of the unknown angle?A straight angle divided into a fifty-eight-degree angle and an unknown angle.100112120122 which of the following is not a driver of the quest to improve product and service quality? a. an increasingly sophisticated consumer base b. the demands of a competitive marketplace c. cost controls d. the threat of product liability lawsuits g to satisfy the valuation assertion when auditing an investment in another company that is publicly and actively traded, an auditor most likely would seek to: Some of the dimensions of a house are shown below.Calculate the length u.Give your answer in metres to 2 d.p.561.65 mu43Not drawn accurately a potential disadvantage of telecommuting is that working at home is likely to contribute to decreased productivity. lead to inflexible work schedules for telecommuters. reinforce negative tendencies such as procrastination. increase real estate costs for the corporation. In the figure below, point O is the center of the circle and mRQ=35 . What is mPOQ ? A. 125 B. 135 C. 70 D. 145 which describe key events, people, and achievements during the time of the roman republic?choose all (2) answers that are correct. If a musician uses his credit card to pay for a new violin that cost 2900 and does not pay on it until the second month what will the 3. 35% monthly interest charge be at the end of the first month show your work and how you got your answer as plants began to move into terrestrial habitats, they had to evolve to combat the threat of . i. if you conducted this coupling step under acidic conditions, how would you expect the reaction rate to be affected? Economist feel the best way to evaluate the cost of a decision is to consider EVERY possible alternative choicea. trueb. false what can be suggested about the meaning connected to the existence of over-sized eyes in depictions of mesopotamian and egyptian gods? Determine whether the given ordered pairs listed are solutions of the system of linear equations.2x + y = 5 3x + 5y = 1(a) (b)(1,3) (2,1)(a) Is (1,3) a solution? alexander construction incurred $285,000 of labor costs for construction jobs completed during the month of which $212,000 was direct labor and $73,000 was indirect labor supervisory costs. the journal entries to record the direct labor for the month would be: How many moles is 54.0g of oxygen gas(O2)? what is the largest dollar amount (saleprice times quantity) for a sale item that was ever made? name it largestitemsale. suppose there is a surplus of qualified architects in the united states. over time, we would expect: