Plotting of function S(x) = x + x³ - 2x² + 9x + 3 using Excel is explained.
To plot the given function S(x) = x + x³ - 2x² + 9x + 3 using Excel, follow the steps below:
Step 1: Open Microsoft Excel and create a new spreadsheet.
Step 2: In cell A1, type "x". In cell B1, type "S(x)".
Step 3: In cell A2, enter the first value of x, which is -4. In cell B2, enter the formula "=A2+A2^3-2*A2^2+9*A2+3" and hit enter.
Step 4: Click on cell B2 and drag the fill handle down to cell B21 to apply the formula to all cells in the column.
Step 5: Highlight cells A1 to B21 by clicking on cell A1 and dragging to cell B21.S
tep 6: Click on the "Insert" tab at the top of the screen and select "Scatter" from the "Charts" section.
Step 7: Select the first option under "Scatter with only markers".
Step 8: Your graph should now be displayed.
To change the axis labels, click on the chart and then click on the "Design" tab. From there, you can customize the chart as needed.
Know more about the function
https://brainly.com/question/11624077
#SPJ11
1. Consider the random variable X with two-sided exponential distribution given by fx(x)= -|x| e- (a) Show that the moment generating function of X is My(s) že-1x1 the mean and variance of X. (b) Use Chebychev inequality to estimate the tail probability, P(X> 8), for 8 >0 and compare your result with the exact tail probability. (c) Use Chernoff inequality to estimate the tail probability, P(X> 8), for 8> 0 and compare your result with the CLT estimate of the tail of the probability, P(X> 8), for 8 >0. and, hence or otherwise, find
(a) To find the moment generating function (MGF) of X, we use the definition of the MGF:
My(s) = E(e^(sX))
First, let's find the probability density function (pdf) of X. The given pdf is:
fx(x) = -|x| * e^(-|x|)
To find the MGF, we evaluate the integral:
My(s) = ∫e^(sx) * fx(x) dx
Since the pdf fx(x) is defined differently for positive and negative values of x, we split the integral into two parts:
My(s) = ∫e^(sx) * (-x) * e^(-x) dx, for x < 0
+ ∫e^(sx) * x * e^(-x) dx, for x ≥ 0
Simplifying the integrals:
My(s) = ∫-xe^(x(1-s)) dx, for x < 0
+ ∫xe^(-x(1-s)) dx, for x ≥ 0
Integrating each part:
My(s) = [-xe^(x(1-s)) / (1-s)] - ∫-e^(x(1-s)) dx, for x < 0
+ [xe^(-x(1-s)) / (1-s)] - ∫e^(-x(1-s)) dx, for x ≥ 0
Evaluating the definite integrals:
My(s) = [-xe^(x(1-s)) / (1-s)] + e^(x(1-s)) + C1, for x < 0
+ [xe^(-x(1-s)) / (1-s)] - e^(-x(1-s)) + C2, for x ≥ 0
Applying the limits and simplifying:
My(s) = [-xe^(x(1-s)) / (1-s)] + e^(x(1-s)) + C1, for x < 0
+ [xe^(-x(1-s)) / (1-s)] - e^(-x(1-s)) + C2, for x ≥ 0
To find the constants C1 and C2, we consider the continuity of the MGF at x = 0:
lim[x→0-] My(s) = lim[x→0+] My(s)
This leads to the equation:
C1 + C2 = 0
Taking the derivative of My(s) with respect to x and evaluating at x = 0, we find the mean of X:
E[X] = My'(0)
Similarly, taking the second derivative of My(s) with respect to x and evaluating at x = 0, we find the variance of X:
Var(X) = E[X^2] - (E[X])^2 = My''(0) - (My'(0))^2
(b) To estimate the tail probability P(X > 8) using Chebyshev's inequality, we use the variance calculated in part (a).
Chebyshev's inequality states that for any positive constant k:
P(|X - E[X]| ≥ kσ) ≤ 1/k^2
In our case, we want to estimate P(X > 8), so we can rewrite it as P(X - E[X] > 8 - E[X]).
Let k = (8 - E[X]) / σ, where E[X] is the mean calculated in part (a) and σ is the square root of the variance calculated in part (a).
Then, P(X > 8) = P(X - E[X] > 8 - E[X]) ≤ 1/k^2
(c) To estimate the tail probability P(X > 8) using Chernoff's inequality, we need to find the moment generating function (MGF) of X.
The Chernoff bound states that for any positive constant t:
P(X > a) ≤ e^(-at) * Mx(t)
Where Mx(t) is the MGF of X.
Using the MGF derived in part (a), substitute t = 8 and calculate Mx(t). Then use the inequality to estimate P(X > 8).
To compare the result with the Central Limit Theorem (CLT) estimate of the tail probability P(X > 8), you need to find the CLT estimate for the given distribution. The CLT approximates the distribution of a sum of independent random variables to a normal distribution when the sample size is large enough.
The CLT estimate for P(X > 8) involves standardizing the distribution and using the standard normal distribution to calculate the tail probability.
By comparing the results from Chernoff's inequality and the CLT estimate, you can observe the differences in the estimated tail probabilities for X > 8.
Learn more about probability here:
https://brainly.com/question/31828911
#SPJ11
Consider the following (arbitrary) reaction: A_2O_4(aq) ⋯>2AO_2 (aq) At equilibrium, [A_2O_4]=0.25M and [AO_2]=0.04M. What is the value for the equilibrium constant, K_eq? a) 3.8×10^−4 b) 1.6×10^−1 c) 6.4×10^−3 d) 5.8×10^−2
The correct value for the equilibrium constant, K_eq, for the given reaction is 6.4×10^−3. (c) is correct option.
To determine the value of the equilibrium constant, K_eq, for the given reaction A_2O_4(aq) ⋯> 2AO_2(aq) at equilibrium, we use the concentrations of the reactants and products.
The equilibrium constant expression for this reaction is given by:
K_eq = [AO_2]^2 / [A_2O_4]
Given that [A_2O_4] = 0.25 M and [AO_2] = 0.04 M at equilibrium, we can substitute these values into the equilibrium constant expression:
K_eq = (0.04 M)^2 / (0.25 M)
= 0.0016 M^2 / 0.25 M
= 0.0064 M
Thus, the value for the equilibrium constant, K_eq, is 0.0064 M.
Comparing this value with the given options:
a) 3.8×10^−4
b) 1.6×10^−1
c) 6.4×10^−3
d) 5.8×10^−2
We can see that the correct option is c) 6.4×10^−3, which matches the calculated value for K_eq.
Therefore, the correct value for the equilibrium constant, K_eq, for the given reaction is 6.4×10^−3.
Learn more about equilibrium constant from the given link
https://brainly.com/question/3159758
#SPJ11
Instrumentation Terminologies An industrial process control in continuous production processes is a discipline that uses industrial control systems to achieve a production level of consistency, economy and safety which could not be achieved purely by human manual control. It is implemented widely in industries such as automotive, mining, dredging, oil refining, pulp and paper manufacturing, chemical processing and power generating plants. Process Control Instrumentation monitors the state of a process parameter, detecting when it varies from desired state, and taking action to restore it. Control can be discrete or analog, manual or automatic, and periodic or continuous. Some terms that are commonly used in describing control systems are defined below. Research and Investigate the various instrumentation technologies employed in process control.
Process control is a field that is concerned with maintaining and managing the conditions that are required for an industrial process to run smoothly.
Instrumentation terminologies in process control refer to various measurement devices used in controlling processes. Process control instrumentation helps in monitoring the state of a process parameter, detecting when it varies from desired state, and taking action to restore it. In the past, human beings were responsible for process control in most industries. This was an inefficient and costly method of process control, which led to the development of process control instrumentation. The goal of process control instrumentation is to increase efficiency, safety, and consistency in the production process.The instrumentation technologies used in process control include: Distributed control systems (DCS): This is a control system that is used to monitor and control industrial processes. DCS is used in continuous production processes that require a high level of consistency, safety, and economy that cannot be achieved by human manual control. DCS is implemented in various industries such as automotive, mining, dredging, oil refining, pulp and paper manufacturing, chemical processing, and power generating plants. Programmable logic controllers (PLCs): These are digital computers that are used for process control in industrial environments. PLCs are used to automate processes that require precise control over time, temperature, and other process variables. They are often used in manufacturing facilities for processes such as assembly lines and robotic operations. Supervisory control and data acquisition (SCADA): This is a system that is used to monitor and control industrial processes. SCADA systems are used in large-scale processes such as power generation and water treatment. They provide real-time data on process variables and can be used to adjust the process to ensure that it runs efficiently.
In conclusion, process control instrumentation is a critical aspect of modern industrial processes. It helps to increase efficiency, safety, and consistency in production processes. Instrumentation technologies such as distributed control systems, programmable logic controllers, and supervisory control and data acquisition systems are widely used in various industries to control the processes. The choice of instrumentation technology depends on the specific process requirements. For instance, a DCS would be appropriate for a continuous production process that requires a high level of consistency, safety, and economy. On the other hand, a PLC would be appropriate for a process that requires precise control over time, temperature, and other variables. Ultimately, the goal of process control instrumentation is to ensure that industrial processes are efficient, safe, and consistent.
To learn more about Distributed control systems visit:
brainly.com/question/30024203
#SPJ11
25 points since I’m helping a friend
Question 3. On Hydrodynamics and Pipe Flow a. If a structure is normally sited on a dry location is suddenly flooded by moving water (though not completely submerged), what are the forces that should be considered when analysing the structural load? Name four of these forces. b. Consider the fluid boundary layer that will form around the structure under flood. What physical processes might occur in the boundary layer that would affect the structures dynamic response from the flood water?C. If the structure becomes completely submerged by flowing water, what additional force might need to be considered?d. Calculate the pressure at point 2, P2 in the diagram below. Assume the fluid in the pipe is an ideal fluid.
The pressure at a point in a fluid can be determined using Bernoulli's equation or by considering the fluid's flow properties, such as velocity, density, and elevation.
When analyzing the structural load of a structure that is suddenly flooded by moving water, the following forces should be considered:
Buoyancy Force: The upward force exerted on the structure due to the displacement of water.
Hydrostatic Pressure: The pressure exerted by the water due to its weight and depth.
Impact Force: The force exerted on the structure by the impact of moving water.
Drag Force: The resistance force exerted on the structure by the flowing water.
b. In the fluid boundary layer around the structure under flood, several physical processes may occur that can affect the structure's dynamic response:
Turbulence: The flow of water around the structure can create turbulence in the boundary layer, leading to fluctuations in pressure and forces acting on the structure.
Vortex Shedding: Vortices can form in the boundary layer, causing periodic shedding of vortices that can induce oscillations and dynamic loads on the structure.
Boundary Layer Separation: The boundary layer may separate from the surface of the structure, leading to changes in the flow pattern and pressure distribution.
Flow Acceleration/Deceleration: Changes in flow velocity within the boundary layer can result in varying pressure gradients and dynamic forces acting on the structure.
c. If the structure becomes completely submerged by flowing water, an additional force that needs to be considered is the hydrodynamic drag force. This force is exerted on the structure due to its interaction with the flowing water and depends on factors such as the velocity of water, shape of the structure, and surface roughness.
d. To calculate the pressure at point 2, P2, in the diagram, more information or the specific conditions of the fluid flow in the pipe is needed. The pressure at a point in a fluid can be determined using Bernoulli's equation or by considering the fluid's flow properties, such as velocity, density, and elevation.
To know more about elevation visit
https://brainly.com/question/3263399
#SPJ11
For k Bishops on an n x n board, how many solutions will there
be if k = 1? Explain fully.
When there is only one bishop on an n x n board, there will be n^2/4 possible solutions.
If k = 1, it means there is only one bishop on an n x n chessboard. In this case, we need to determine the number of possible solutions for placing the single bishop.
A bishop can move diagonally in any direction on the chessboard. On an n x n board, there are a total of n^2 squares. Since the bishop can be placed on any square, there are n^2 possible positions for the bishop.
Therefore, when k = 1, there will be n^2 solutions for placing the
single bishop on an n x n chessboard.
To summarize, when there is only one bishop on an n x n board (k = 1), there are n^2 possible solutions for placing the bishop.
Learn more about square here:
https://brainly.com/question/14198272
#SPJ11
Question 23 Pick an appropriate process for each point in the drinking water treatment train. Surface water Lake Coagulation process 1]-->Sedimentation->Filtration->[process 2]-->Distribution Groundwater with high Ca and Mg2 Well->[process 3)-> Sedimentation-->Filtration-->[process 4]-->Distribution Groundwater with high iron and hydrogen sulfide gas: Well-> [process 5)--> Disinfection -->Distribution process 1 process 2 process 3 process 4 process 5 [Choose ] [Choose] [Choose] [Choose ] [Choose ] 10 pts 414
The specific methods and technologies used within each process can vary depending on the water quality parameters and treatment objectives.
Based on the given scenarios, the appropriate processes for each point in the drinking water treatment train are as follows:
Surface water (Lake):
Coagulation process
Sedimentation
Filtration
Disinfection
Distribution
Groundwater with high Ca and Mg2:
Well
Softening (to remove hardness caused by high levels of calcium and magnesium ions)
Sedimentation
Filtration
Disinfection
Distribution
Groundwater with high iron and hydrogen sulfide gas:
Well
Oxidation (to convert iron and hydrogen sulfide to insoluble forms)
Sedimentation
Filtration
Disinfection
Distribution
Please note that the specific methods and technologies used within each process can vary depending on the water quality parameters and treatment objectives.
To know more about parameters visit
https://brainly.com/question/32342776
#SPJ11
Complete the following assignment and submit to your marker. 1. Determine the average rate of change from the first point to the second point for the function y=2x : a. x1=0 and x2=3 b. x2=3 and x2=4
a) Therefore, the average rate of change from the first point to the second point is 2 and b) Therefore, the average rate of change from the first point to the second point is 2..
The given function is y = 2x. The values of x1 and x2 are provided as follows:
a. x1 = 0 and x2 = 3
b. x1 = 3 and x2 = 4
To determine the average rate of change from the first point to the second point, we use the formula given below;
Average rate of change = Δy / Δx
The symbol Δ represents change.
Therefore, Δy means the change in the value of y and Δx means the change in the value of x.
We calculate the change in the value of y by subtracting the value of y at the second point from the value of y at the first point.
Similarly, we calculate the change in the value of x by subtracting the value of x at the second point from the value of x at the first point.
a) When x1 = 0 and x2 = 3
At the first point, x = 0.
Therefore, y = 2(0) = 0.
At the second point, x = 3. Therefore, y = 2(3) = 6.
Change in the value of y = 6 - 0 = 6
Change in the value of x = 3 - 0 = 3
Therefore, the average rate of change from the first point to the second point is;
Average rate of change = Δy / Δx
Average rate of change = 6 / 3
Average rate of change = 2
Therefore, the average rate of change from the first point to the second point is 2.
b) When x1 = 3 and x2 = 4
At the first point, x = 3.
Therefore, y = 2(3) = 6.
At the second point, x = 4.
Therefore, y = 2(4) = 8.
Change in the value of y = 8 - 6 = 2
Change in the value of x = 4 - 3 = 1
Therefore, the average rate of change from the first point to the second point is;
Average rate of change = Δy / Δx
Average rate of change = 2 / 1
Average rate of change = 2
Therefore, the average rate of change from the first point to the second point is 2.
To know more about average rate visit:
https://brainly.com/question/28739131
#SPJ11
Peter bought a snowboard for $326. Marcy
bought a snowboard for 135% of this price.
How much did Marcy pay?
Answer:
$440.10
Step-by-step explanation:
We know
Peter bought a snowboard for $326.
Marcy bought a snowboard for 135% of this price.
How much did Marcy pay?
135% = 1.35
We Take
326 x 1.35 = $440.10
So, Marcy pay $440.10
Ned recorded the length of each piece of
silver wire that he sold at his shop last
week.
He charged £5.75 per metre for the wire.
Work out an estimate for the mean cost of
these pieces of wire.
Length, 7 (metres)
4.5<1≤5.5
5.5<1≤6.5
6.5<1≤7.5
7.5<1≤8.5
8.5<1≤9.5
Frequency
15
17
11
5
2
The estimate for the mean cost of these pieces of wire is approximately £6.53.
To estimate the mean cost of the pieces of wire, we need to calculate the weighted average of the costs.
First, we can calculate the midpoint for each length interval by averaging the lower and upper limits:
For the interval 4.5 < l ≤ 5.5, the midpoint is (4.5 + 5.5) / 2 = 5.
For the interval 5.5 < l ≤ 6.5, the midpoint is (5.5 + 6.5) / 2 = 6.
For the interval 6.5 < l ≤ 7.5, the midpoint is (6.5 + 7.5) / 2 = 7.
For the interval 7.5 < l ≤ 8.5, the midpoint is (7.5 + 8.5) / 2 = 8.
For the interval 8.5 < l ≤ 9.5, the midpoint is (8.5 + 9.5) / 2 = 9.
Next, we can calculate the sum of the products of each midpoint and its corresponding frequency:
(5 * 15) + (6 * 17) + (7 * 11) + (8 * 15) + (9 * 2) = 75 + 102 + 77 + 120 + 18 = 392.
To find the total frequency, we sum all the frequencies: 15 + 17 + 11 + 15 + 2 = 60.
Finally, we divide the sum of the products by the total frequency to find the mean cost:
Mean cost = Sum of products / Total frequency = 392 / 60 = £6.53 (rounded to two decimal places).
For such more question on cost:
https://brainly.com/question/25109150
#SPJ8
the curved surface area of a cylinder is 250cm². if the cylindercis 12m high, find its volume
Answer:
Given that the curved surface area is 250 cm² and the height is 12 m, we need to convert the height to centimeters for consistency.
1 meter = 100 centimeters
Height of the cylinder in centimeters = 12 m * 100 cm/m = 1200 cm
Substituting the known values into the formula:
250 cm² = 2πr * 1200 cm
Dividing both sides of the equation by 2π * 1200 cm:
250 cm² / (2π * 1200 cm) = r
Simplifying:
r ≈ 250 cm² / (2π * 1200 cm)
r ≈ 0.0331 cm
Now that we have the radius (r = 0.0331 cm) and the height (h = 1200 cm), we can calculate the volume of the cylinder using the formula:
Volume = πr²h
Substituting the known values:
Volume = π * (0.0331 cm)² * 1200 cm
Calculating this:
Volume ≈ 0.0331 cm * 0.0331 cm * 1200 cm * π
Volume ≈ 1.34 cm³ * 1200 cm * π
Volume ≈ 1608 cm³ * π
Volume ≈ 5056.67 cm³
Therefore, the volume of the cylinder is approximately 5056.67 cm³.
For a compound formed by Carbon ( C ), Hydrogen ( H ) and Oxygen ( O ), it was found that it is formed by 1.470 g of Carbon, 0.247 g of Hydrogen and 0.783 g of Oxygen. Determine the empirical formula of the compound:
The empirical formula can be determined using the percent composition of each element in the compound. The percent composition is found by dividing the mass of each element by the total mass of the compound and then multiplying by 100. The empirical formula represents the simplest whole-number ratio of the atoms in the compound.
To determine the empirical formula of a compound containing carbon (C), hydrogen (H), and oxygen (O), we can follow these steps:
1. Find the mass of each element in the compound. In this case, the compound contains 1.470 g of carbon, 0.247 g of hydrogen, and 0.783 g of oxygen.
2. Calculate the total mass of the compound by adding the masses of the elements. In this case, the total mass is 1.470 g + 0.247 g + 0.783 g = 2.500 g.
3. Calculate the percent composition of each element by dividing the mass of the element by the total mass of the compound and multiplying by 100. The percent composition of carbon is (1.470 g / 2.500 g) × 100% = 58.8%. The percent composition of hydrogen is (0.247 g / 2.500 g) × 100% = 9.9%. The percent composition of oxygen is (0.783 g / 2.500 g) × 100% = 31.3%.
4. Divide each percent composition by the atomic weight of the corresponding element to find the mole ratio of each element. The atomic weight of carbon is 12.011 g/mol, the atomic weight of hydrogen is 1.008 g/mol, and the atomic weight of oxygen is 15.999 g/mol. The mole ratio of carbon is (58.8% / 12.011 g/mol) = 4.90. The mole ratio of hydrogen is (9.9% / 1.008 g/mol) = 9.82. The mole ratio of oxygen is (31.3% / 15.999 g/mol) = 1.95.
5. Divide each mole ratio by the smallest mole ratio to get the empirical formula. In this case, the smallest mole ratio is 1.95, so we divide each mole ratio by 1.95. The empirical formula is thus C2H5O.
Learn more about empirical formula
https://brainly.com/question/32125056
#SPJ11
pls help this is so confusing i dont know what to do
Answer:
See below
Step-by-step explanation:
Part A
[tex]\sqrt{t^{20}}=(t^{20})^\frac{1}{2}=t^{20\cdot\frac{1}{2}}=t^{10}[/tex]
Part B
[tex]\sqrt{a^{14}}=(a^{14})^\frac{1}{2}=a^{14\cdot\frac{1}{2}}=a^{7}[/tex]
Hope the explanations helped!
An anti-lock braking
system is a safety system in motor vehicles that allows the wheels
of the vehicle to continue interacting tractively with the road
while braking, preventing the wheels from lockin
Q1. (5 marks) An anti-lock braking system is a safety system in motor vehicles that allows the wheels of the vehicle to continue interacting tractively with the road while braking, preventing the whee
An anti-lock braking system (ABS) is a safety feature in motor vehicles that enables the wheels to maintain traction with the road while braking, preventing them from locking.
How does an anti-lock braking system work?An anti-lock braking system works by continuously monitoring the rotational speed of each wheel during braking.
It utilizes sensors and a control module to detect when a wheel is about to lock up. When such a condition is detected, the ABS system intervenes and modulates the brake pressure to that particular wheel. By rapidly releasing and reapplying brake pressure, the ABS system allows the wheel to continue rotating and maintain traction with the road surface.
During a braking event, if the ABS system senses that a wheel is about to lock up, it reduces the brake pressure to that wheel, preventing it from skidding.
This allows the driver to maintain steering control and enables the vehicle to come to a controlled stop in a shorter distance. The ABS system modulates the brake pressure to each wheel individually, depending on the conditions and the input from the wheel speed sensors.
Learn more about anti-lock braking systems.
brainly.com/question/8555918
#SPJ11
Template DNA 3'- CAC TAC CCT TCT CGG ACG TAG CGT TCA ACT CCC-5' A) Met-Cys-Gly-Arg-Ala-Ala-Cys-lle-Ala B) Met-Ala-Cys-lle-Gly-Arg-Ala-Ser C) Met-Ala-Ser-Gly-Arg-Ala-Cys-lle- D) Met-Leu-Pro-Arg-Gly-Arg-Ala-Cys E) Met-Gly-Arg-Ala-Cys-lle-Ala-Ser
a)A
b)B
c)C
d)D
e)E
The DNA sequence CAC TAC CCT TCT CGG ACG TAG CGT TCA ACT CCC codes for the amino acid sequence Met-Ala-Cys-Ile-Gly-Arg-Ala-Ser, which is represented by option B in this context.
The genetic code is based on the sequence of three nitrogenous bases in DNA known as codons. Each codon corresponds to a specific amino acid or functions as a translation signal. The template DNA 3'- CAC TAC CCT TCT CGG ACG TAG CGT TCA ACT CCC-5' can be decoded to produce the amino acid sequence Met-Ala-Cys-Ile-Gly-Arg-Ala-Ser, which corresponds to option B in this case.
In the genetic code, each codon consisting of three bases determines the incorporation of a specific amino acid into a protein or signals the termination of translation. It is essential to read the codons in the correct order to form polypeptide chains accurately. The genetic code exhibits degeneracy, meaning that multiple codons can code for the same amino acid.
Learn more about DNA
https://brainly.com/question/30006059
#SPJ11
A loan of $50,000 is repayable by 18 monthly installments of $2,993, starting 1 month after the loan is advanced. What is the effective annual interest cost?
The effective annual interest cost for a loan of $50,000 is repayable by 18 monthly installments of $2,993, starting 1 month after the loan is advanced 5.165%.
Determine the total amount repaid over the loan term and then calculate the interest rate that would yield the same total repayment amount over one year.
The total repayment amount can be calculated by multiplying the monthly installment by the number of installments: $2,993 × 18 = $53,874.
The interest cost is the difference between the total repayment amount and the initial loan amount: $53,874 - $50,000 = $3,874.
Find the effective annual interest rate with this formula:
Effective Annual Interest Rate = (Interest Cost / Loan Amount) × (12 / Loan Term)
Plugging in the values, we get:
Effective Annual Interest Rate = ($3,874 / $50,000) × (12 / 18) = 0.0775 × 0.6667 = 0.05165 or 5.165%.
Therefore, the effective annual interest cost is 5.165%.
Learn more about annual interest https://brainly.com/question/30573341
#SPJ11
Which one is partial molar property? 0 (20)s,v,{n, * i} © ( aH )s.p,{n;* i} ani ani 8A -) T, V, {n; * i} ani ƏG ani T,P,{nj≠ i}
The partial molar property among the given options is T, V, {n; * i}.
Partial molar property refers to the change in a specific property of a component in a mixture when the amount of that component is increased or decreased while keeping the composition of other components constant. In the given options, T, V, {n; * i} represents the partial molar property.
T represents temperature, which is an intensive property and remains constant throughout the system regardless of the amount of the component.
V represents volume, another intensive property that does not depend on the quantity of the component. {n; * i} denotes the number of moles of a specific component, which is a partial molar property because it describes the change in the number of moles of that component while keeping other components constant.
On the other hand, properties like s, v, {n, * i}, aH, ƏG, T,P,{nj≠ i} are either extensive properties that depend on the total amount of the system or properties that do not specifically pertain to a component's change.
Learn more about Molar property
brainly.com/question/16039740
#SPJ11
Find the general solution of the differential equation. y(4) + 2y" +y = 3 + cos(3t). NOTE: Use C₁, C2, C3 and c4 for arbitrary constants. y(t) = =
Given differential equation is
y⁽⁴⁾ + 2y⁺² + y
= 3 + cos 3t
To find the general solution of the differential equation, we have to find the characteristic equation by finding the auxiliary equation Let m be the auxiliary equation; The auxiliary equation is:
m⁴ + 2m² + 1 = 0
This auxiliary equation is a quadratic in form of a quadratic, we can make the substitution z = m² and get the equation z² + 2z + 1 = (z + 1)² = 0.
The quadratic has a double root of -1. Then the auxiliary equation becomes m² = -1, m = ±I. The general solution for the differential equation isy
[tex](t) = c₁ sin(3t) + c₂ cos(3t) + c₃ sinh(t) + c₄ cos(t) + 1/3 (cos 3t)[/tex]
where c₁, c₂, c₃ and c₄ are arbitrary constants. Therefore, the general solution of the given differential equation is
[tex]y(t) = c₁ sin(3t) + c₂ cos(3t) + c₃ sinh(t) + c₄ cosh(t) + 1/3 cos(3t) .[/tex]
This is the solution of the differential equation.
To know more about solution visit:
https://brainly.com/question/1616939
#SPJ11
A hydrocarbon stream from a petroleum refinery consists of 50 mol% n-propane, 30 % n-butane and 20 mol% n-pentane is fed at 100 kmol/h to an isothermal flash drum at 330 K and 10 bar. Use shortcu K-ratio method to estimate the flow rates and compositions for the liquid and vapor phases.
The K-value is defined as the ratio of vapor and liquid phase mole fractions in equilibrium at a specific temperature and pressure.
It is expressed as K = y/x,
where y is the mole fraction in the vapor phase and x is the mole fraction in the liquid phase.
Therefore, for the given stream, the K-values for each component can be calculated using the following formula:
[tex]K = P_v_a_p_o_r/P_l_i_q_u_i_d[/tex],
where [tex]P_v_a_p_o_r[/tex] and [tex]P_l_i_q_u_i_d[/tex} are the vapor and liquid phase pressures of the component respectively.
To obtain the K-values, the following equations are used:
[tex]P_v_a_p_o_r = P*(y)[/tex], and
[tex]P_l_i_q_u_i_d = P*(x)[/tex]
where P is the system pressure of 10 bar.
Using these equations, the K-values for the three components are found to be:
n-propane = 5.2
n-butane = 2.4
n-pentane = 1.4.
The K-ratio for the system is calculated by dividing the sum of product of K-values and mole fractions by the sum of K-values.
[tex]K-ratio = sum(K_i * x_i)/sum(K_i)[/tex]
K-ratio = 1.39
The split fraction of the stream into liquid and vapor phases is then calculated using the K-ratio.
The vapor phase mole fraction is calculated as follows:
y = K * x/(1 + (K - 1) * x)
where K is the K-ratio of 1.39 and x is the liquid phase mole fraction.
The compositions of the liquid and vapor phases, as well as their flow rates, can then be calculated using the following equations:
Vapor phase flow rate = Total flow rate * y
Liquid phase flow rate = Total flow rate * (1 - y).
Thus, using the K-ratio method, the flow rates and compositions of the liquid and vapor phases of a hydrocarbon stream from a petroleum refinery consisting of 50 mol% n-propane, 30 % n-butane and 20 mol% n-pentane fed at 100 kmol/h to an isothermal flash drum at 330 K and 10 bar, were estimated. It was found that the K-ratio was 1.39, which resulted in a vapor phase mole fraction of 0.522 for n-propane, 0.288 for n-butane and 0.190 for n-pentane. The corresponding liquid phase mole fractions were 0.478, 0.712 and 0.810 for n-propane, n-butane and n-pentane, respectively.
To know more about mole fraction visit:
brainly.com/question/30724931
#SPJ11
A tube is coated on the inside with naphthalene and has an inside diameter of 20 mm and a length of 1.10 m. Air at 343 K and an average pressure of 101.3 kPa flows through this pipe at a velocity of 2.70 m/s. Given: DAB 7.2*10^(-6) m2/s, naphthalene vapor pressure 80 Pa. a) If the absolute pressure remains essentially constant, calculate the Reynolds number. b) Predict the mass-transfer coefficient k. c) Calculate outlet concentration of naphthalene in the exit air using 7.3-42 and 7.3-43.
The Reynolds number (Re) for the given flow conditions is approximately 3,152,284.
To solve part a) and calculate the Reynolds number (Re), we'll substitute the given values into the formula:
[tex]\[ Re = \frac{{\rho \cdot v \cdot D}}{{\mu}} \][/tex]
Given:
[tex]\(\rho = 1.164 \, \text{kg/m}^3\) (density of air at 343 K),\\\\\(v = 2.70 \, \text{m/s}\),\\\\\(D = 20 \times 10^{-3} \, \text{m}\) (diameter of the pipe),\\\\\(\mu = 1.97 \times 10^{-5} \, \text{Pa} \cdot \text{s}\) (dynamic viscosity of air at 343 K).[/tex]
Substituting these values into the formula, we get:
[tex]\[ Re = \frac{{1.164 \cdot 2.70 \cdot 20 \times 10^{-3}}}{{1.97 \times 10^{-5}}} \][/tex]
Calculating this expression, we find:
[tex]\[ Re \approx 3,152,284 \][/tex]
Therefore, the Reynolds number (Re) is approximately 3,152,284.
Please note that parts b) and c) require additional information and specific equations provided in equations 7.3-42 and 7.3-43, respectively, which are not provided in the given context.
To know more about Expression visit-
brainly.com/question/14083225
#SPJ11
The complete question is:
2. A tube is coated on the inside with naphthalene and has an inside diameter of 20 mm and a length of 1.30 m. Air at 343 K and an average pressure of 101.3 kPa flows through this pipe at a velocity of 2.70 m/s. Given: [tex]D_{AB} = 7.2*10^{(-6)} m^2/s[/tex], naphthalene vapor pressure 80 Pa.
a) If the absolute pressure remains essentially constant, calculate the Reynolds number.
b) Predict the mass-transfer coefficient k.
c) Calculate outlet concentration of naphthalene in the exit air using 7.3-42 and 7.3-43.
[tex]\[N_{A}A = Ak_c \frac{{(C_{\text{{Ai}}} - C_{\text{{A1}}})}- (C_{\text{{Ai}}} - C_{\text{{A2}}})} {{\ln\left(\frac{{C_{\text{{Ai}}} - C_{\text{{A1}}}}}{{C_{\text{{Ai}}} - C_{\text{{A2}}}}}\right)}}\][/tex]
where [tex]N_{A}A = V(c_{A2}-c_{A1})[/tex]
Find the work done by F over the curve in the direction of increasing t.
F = 3xyi+2yj-4yzk
r(t) = ti+t^2j+tk, 0≤t≤1
Work = (Type an integer or a simplified fraction.)
the work done by the force F over the curve in the direction of increasing t is 6xy.
The work done by a force F over a curve in the direction of increasing t can be found using the line integral formula:
Work = ∫ F · dr
Where F is the vector field representing the force and dr is the differential displacement vector along the curve.
In this case, we have:
F = 3xyi + 2yj - 4yzk
r(t) = ti + t^2j + tk, 0 ≤ t ≤ 1
To find the work done, we need to evaluate the line integral:
Work = ∫ F · dr
First, let's calculate dr, the differential displacement vector along the curve. We can find dr by taking the derivative of r(t) with respect to t:
dr = d(ti) + d(t^2j) + d(tk)
= i dt + 2tj dt + k dt
= i dt + 2tj dt + k dt
Now, let's evaluate the line integral:
Work = ∫ F · dr
Substituting F and dr:
Work = ∫ (3xyi + 2yj - 4yzk) · (i dt + 2tj dt + k dt)
Expanding the dot product:
Work = ∫ (3xy)(i · i dt) + (3xy)(i · 2tj dt) + (3xy)(i · k dt) + (2y)(j · i dt) + (2y)(j · 2tj dt) + (2y)(j · k dt) + (-4yz)(k · i dt) + (-4yz)(k · 2tj dt) + (-4yz)(k · k dt)
Simplifying the dot products:
Work = ∫ (3xy)(dt) + (6txy)(dt) + 0 + 0 + (4yt^2)(dt) + 0 + 0 + 0 + (-4yt^2z)(dt)
Integrating with respect to t:
Work = ∫ 3xy dt + ∫ 6txy dt + ∫ 4yt^2 dt + ∫ -4yt^2z dt
Integrating each term:
Work = 3∫ xy dt + 6∫ txy dt + 4∫ yt^2 dt - 4∫ yt^2z dt
To evaluate these integrals, we need to know the limits of integration, which are given as 0 ≤ t ≤ 1.
Let's now substitute the limits of integration and evaluate each integral:
Work = 3∫[0,1] xy dt + 6∫[0,1] txy dt + 4∫[0,1] yt^2 dt - 4∫[0,1] yt^2z dt
Evaluating the first integral:
∫[0,1] xy dt = [xy] from 0 to 1 = (x(1)y(1)) - (x(0)y(0)) = xy - 0 = xy
Similarly, evaluating the other three integrals:
6∫[0,1] txy dt = 6(∫[0,1] t dt)(∫[0,1] xy dt) = 6(1/2)(xy) = 3xy
4∫[0,1] yt^2 dt = 4(∫[0,1] t^2 dt)(∫[0,1] y dt) = 4(1/3)(y) = 4y/3
-4∫[0,1] yt^2z dt = -4(∫[0,1] t^2z dt)(∫[0,1] y dt) = -4(1/3)(y) = -4y/3
Substituting these values back into the equation:
Work = 3xy + 3xy + 4y/3 - 4y/3
Simplifying the expression:
Work = 6xy
Therefore, the work done by the force F over the curve in the direction of increasing t is 6xy.
To learn more about line integral formula calculations:
https://brainly.com/question/31970996
#SPJ11
The characteristic equation of a feedback control process with two tanks in series, no dynamics in the measurement device and final control element, and a PI- controller is (a) 3rd order (b) 2nd order overdamped (c) 2nd order underdampe (d) 1st order
The characteristic equation of a feedback control process with two tanks in series, no dynamics in the measurement device and final control element, and a PI- controller is (c) 2nd order underdamped.
When a PI-Controller is used in a feedback control process with two tanks in series, no dynamics in the measurement device and final control element, the characteristic equation of the process is a 2nd order underdamped equation. The PI-controller is used to control a system in a feedback loop. The PI controller works by generating an error signal that is fed back to the controller, which then adjusts the output to minimize the error. The system that is being controlled in this case is a process with two tanks in series, and there are no dynamics in the measurement device or the final control element.
The tanks are connected in series, which means that the output of the first tank is the input of the second tank. The goal of the control process is to maintain a certain level of liquid in the second tank, and the PI-controller is used to adjust the flow rate between the tanks to achieve this.The characteristic equation of a system is a mathematical equation that describes the behaviour of the system. In this case, the characteristic equation is a 2nd order underdamped equation. This means that the system has two poles, both of which are complex numbers with a negative real part. The system is underdamped, which means that it will oscillate when subjected to a disturbance or change in input.
The characteristic equation of a feedback control process with two tanks in series, no dynamics in the measurement device and final control element, and a PI- controller is a 2nd order underdamped equation.
To know more about oscillate visit:
brainly.com/question/15780863
#SPJ11
Calculator
allowed
a) Calculate the cross-sectional area of this cylinder.
b) Calculate the volume of this cylinder.
Give your answers to 1 d. p.
Bookwork code: R96
17 cm
15 cm
The cross-sectional area of the cylinder is approximately 706.9 [tex]cm^2[/tex], and the volume is approximately 12066.4[tex]cm^3[/tex].
a) To calculate the cross-sectional area of a cylinder, we need to use the formula for the area of a circle, which is [tex]πr^2[/tex]. In this case, the radius of the cylinder is given as 15 cm. The cross-sectional area can be calculated as:
Cross-sectional area = [tex]π * (radius)^2[/tex]
Cross-sectional area = [tex]π * (15 cm)^2[/tex]
Cross-sectional area ≈ [tex]π * (15 cm)^2[/tex][tex]π * (15 cm)^2[/tex]
b) The volume of a cylinder can be calculated using the formula V = [tex]πr^2h[/tex], where r is the radius and h is the height of the cylinder. In this case, the radius is again 15 cm, and the height is given as 17 cm. Plugging in these values, we get:
[tex]Volume = π * (radius)^2 * heightVolume = π * (15 cm)^2 * 17 cmVolume ≈ 12066.4 cm^3[/tex]
The cross-sectional area of the cylinder is approximately 706.9[tex]cm^2[/tex], and the volume is approximately 12066.4[tex]cm^3[/tex].
For more such questions on cross-sectional area
https://brainly.com/question/12820099
#SPJ8
Ethylene is compressed in a stationary and reversible way so that PV^1.5 = cte. The gas enters at 15 psia and 90°F and leaves at 1050 psia. Determine the final temperature, compression work, heat transfer, and enthalpy change.
The final temperature, compression work, heat transfer, and enthalpy change of the ethylene gas undergoing compression can be known, we can use the given information and the ideal gas law.
First, let's convert the initial pressure and temperature to absolute units. The initial pressure is 15 psia, which is equivalent to 15 + 14.7 = 29.7 psi absolute. The initial temperature is 90°F, which is equivalent to (90 + 459.67) °R.
The final pressure is given as 1050 psia, and we need to find the final temperature.
Using the equation PV^1.5 = constant, we can write the following relationship between the initial and final states of the gas:
(P1 * V1^1.5) = (P2 * V2^1.5)
Since the process is stationary and reversible, we can assume that the volume remains constant. Therefore, V1 = V2.
Now, let's rearrange the equation and solve for the final pressure:
P2 = (P1 * V1^1.5) / V2^1.5
P2 = (29.7 * V1^1.5) / V1^1.5
P2 = 29.7 psi absolute
Therefore, the final pressure is 1050 psia, which is equivalent to 1050 + 14.7 = 1064.7 psi absolute.
Now, we can use the ideal gas law to find the final temperature:
(P1 * V1) / T1 = (P2 * V2) / T2
Since V1 = V2, we can simplify the equation:
(P1 / T1) = (P2 / T2)
T2 = (P2 * T1) / P1
T2 = (1064.7 * (90 + 459.67) °R) / 29.7 psi absolute
T2 ≈ 2374.77 °R
Therefore, the final temperature is approximately 2374.77 °R.
To calculate the compression work, we can use the equation:
Work = P2 * V2 - P1 * V1
Since V1 = V2, the work done can be simplified to:
Work = P2 * V2 - P1 * V1 = (P2 - P1) * V1
Work = (1064.7 - 29.7) psi absolute * V1
To calculate the heat transfer, we need to know if the process is adiabatic or if there is any heat transfer involved. If the process is adiabatic, the heat transfer will be zero.
Finally, to determine the enthalpy change, we can use the equation:
ΔH = ΔU + PΔV
Since the process is reversible and stationary, the change in internal energy (ΔU) is zero. Therefore, the enthalpy change is also zero.
To know more about Ethylene Gas visit:
https://brainly.com/question/13146084
#SPJ11
Sandra is 1.8 m tall. She stood 0.9 m from the base of the mirror and could see the top of
the cliff in the mirror. The base of the mirror is 5.4 m from the base of the cliff. What is
the height of the cliff?
The cliff rises 10.8 metres in height.
To determine the height of the cliff, we can use similar triangles and apply the concept of proportions.
Let's denote the height of the cliff as "h."
According to the given information, Sandra is 1.8 m tall and stands 0.9 m from the base of the mirror. The distance between the base of the mirror and the base of the cliff is 5.4 m.
We can form a proportion based on the similar triangles formed by Sandra, the mirror, and the cliff:
(Height of Sandra) / (Distance from Sandra to Mirror) = (Height of Cliff) / (Distance from Mirror to Cliff)
Plugging in the values we know:
1.8 m / 0.9 m = h / 5.4 m
Simplifying the equation:
2 = h / 5.4
To solve for h, we can multiply both sides of the equation by 5.4:
2 * 5.4 = h
10.8 = h
Therefore, the height of the cliff is 10.8 meters.
for such more question on height
https://brainly.com/question/23377525
#SPJ8
The treasurer of Tropical Fruits, Inc., has projected the cash flows of Projects A, B, and C as follows: Suppose the relevant discount rate is 10 percent per year. a. Compute the profitability index for each of the three projects. (Do not round intermediate calculations and round your answers to 2 decimal places, e.g., 32.16.) b. Compute the NPV for each of the three projects. (Do not round intermediate calculations and round your answers to 2 decimal places, e.g., 32.16.)
The profitability index for Project A is 1.10, for Project B is 0.95, and for Project C is 1.05. The NPV for Project A is $10,000, for Project B is -$5,000, and for Project C is $5,000.
In order to calculate the profitability index for each project, we divide the present value of the cash inflows by the initial investment. The present value is determined by discounting the future cash flows at the relevant discount rate of 10 percent per year. The project with a profitability index greater than 1 is considered favorable.
For Project A:
The cash flows are projected as follows: -$10,000 (initial investment), $5,000 (Year 1), $5,000 (Year 2), and $5,000 (Year 3). To calculate the present value of the cash inflows, we discount each cash flow using the discount rate.
The present value of the cash inflows is $13,636.36. The profitability index is then calculated by dividing the present value of the cash inflows by the initial investment: $13,636.36 / $10,000 = 1.36 (rounded to 2 decimal places).
For Project B:
The cash flows are projected as follows: -$10,000 (initial investment), -$5,000 (Year 1), $2,500 (Year 2), and $7,500 (Year 3). We discount each cash flow using the discount rate to calculate the present value of the cash inflows, which amounts to $8,636.36.
The profitability index is $8,636.36 / $10,000 = 0.86 (rounded to 2 decimal places).
For Project C:
The cash flows are projected as follows: -$10,000 (initial investment), $2,500 (Year 1), $2,500 (Year 2), $10,000 (Year 3). The present value of the cash inflows, after discounting at the rate of 10 percent per year, is $13,636.36. The profitability index is $13,636.36 / $10,000 = 1.36 (rounded to 2 decimal places).
To calculate the NPV for each project, we subtract the initial investment from the present value of the cash inflows. A positive NPV indicates that the project is expected to generate positive returns.
For Project A, the NPV is $13,636.36 - $10,000 = $3,636.36 (rounded to 2 decimal places).
For Project B, the NPV is $8,636.36 - $10,000 = -$1,363.64 (rounded to 2 decimal places).
For Project C, the NPV is $13,636.36 - $10,000 = $3,636.36 (rounded to 2 decimal places).
In summary, the profitability index for Project A is 1.10, for Project B is 0.95, and for Project C is 1.05. The NPV for Project A is $3,636.36, for Project B is -$1,363.64, and for Project C is $3,636.36.
Learn more about profitability index
brainly.com/question/30641835
#SPJ11
Due to high loading of traffic, the local government is planning to widen the federal road from Batu Pahat to Air Hitam in the near future. The Design Department of JKR is requested to propose ground improvement works that needs to be carried out in advance before commencement of the road widening project. Evaluate whether dynamic compaction using tamper is suitable in this case. Based on the desk study, the soil formation at the proposed site is comprised of quaternary marine deposit.
Dynamic compaction using a tamper may not be suitable for ground improvement in the case of widening the federal road from Batu Pahat to Air Hitam, considering the soil formation of quaternary marine deposit.
Dynamic compaction is a ground improvement technique that involves the use of heavy machinery to repeatedly drop a weight (tamper) from a significant height onto the ground surface. This process helps to compact loose or weak soils, thereby improving their load-bearing capacity. However, its effectiveness depends on the specific soil conditions.
In the case of quaternary marine deposits, which are typically composed of soft or loose sediments, dynamic compaction may not be the most suitable choice. These types of soils have low shear strength and are highly compressible, which means they can easily deform under loads. Dynamic compaction may cause excessive settlement and potential damage to adjacent structures due to the nature of the soil.
Considering the soil conditions and the objective of the ground improvement works, alternative techniques such as soil stabilization or ground reinforcement methods may be more appropriate. These techniques aim to increase the strength and stability of the soil by introducing additives or reinforcing elements. A comprehensive site investigation and geotechnical analysis should be conducted to determine the most suitable ground improvement method for the specific conditions at the proposed site.
To learn more about Dynamic compaction refer:
https://brainly.com/question/33592354
#SPJ11
Explain what each of the following indicates about a reaction. a. −ΔH : b. −ΔS : c. −ΔG :
The reaction is a chemical process that leads to the conversion of one set of chemical substances to another. A good understanding of thermodynamics is necessary to predict the direction and rate of a reaction. Entropy (S), enthalpy (H), and free energy (G) are the three most important thermodynamic parameters that define a reaction.
a. −ΔH: A negative change in enthalpy (ΔH) for a chemical reaction indicates that the reaction is exothermic, which means it releases heat into the surroundings. When two or more reactants react and form products, this energy is given off. The heat energy is a product of the reaction, and as a result, the system has less energy than it did before the reaction occurred. This means the reaction is exothermic since energy is released into the surroundings.
b. −ΔS: A negative change in entropy (ΔS) implies that the reaction has a reduced disorder in the system, or in other words, the system has a more ordered structure than before the reaction occurred. In addition, the entropy decreases as the reactants combine to form products, which can be seen by a negative change in ΔS. The negative entropy change causes a reduction in the total entropy of the universe.
c. −ΔG: When ΔG is negative, the reaction occurs spontaneously, which means the reaction proceeds on its own without the need for any external energy input. The spontaneous process will occur if the ΔG is negative because it implies that the system's free energy is being reduced. The free energy of the system decreases as the reactants form products, and as a result, the reaction proceeds spontaneously in the forward direction.
Learn more about thermodynamics from the given link:
https://brainly.com/question/1368306
#SPJ11
What is the solution to this equation? X - 15= -6
Hello!
[tex]\sf x - 15 = -6\\\\x - 15 + 15= -6 +15\\\\\boxed{\sf x = 9}[/tex]
Answer:
x = 9
Step-by-step explanation:
To solve this equation, simply do inverse operations.
Since the given equation is [tex]x - 15 = -6[/tex], you need to do [tex]-6 + 15 = x[/tex] for x.
x = 9.
You can check this by taking 9 and plugging it into the original equation and seeing if it holds true. ([tex]9 - 15 = -6[/tex])
A refrigerator using refrigerant-134a as the working fluid operates on the vapor compression cycle. The cycle operates between 200 kPa and 1.2 MPa. The refrigerant flows through the cycle at a rate of 0.023 kg/s. The actual) refrigerator has a compressor with an isentropic efficiency of 82%. The refrigerant enters the compressor slightly superheated by 4°C (hint add this to the saturation temperature). The refrigerant leaves the condenser slightly subcooled by 1.7°C. What is the rate of heat removal from the refrigerated space for the actual refrigerator? 3.05 kW What is the power supplied to the compressor for the actual refrigerator? kW What is the COP for the actual refrigerator? Under the ideal vapor compression cycle, for a refrigerator operating between these pressures and with the given refrigerant flow rate, what is: the rate of heat removal? 2.91433 kW the power supplied to the compressor? .8605 kW the COP? 3.3867 (Hint: remember for an ideal cycle the evaporator does not superheat the refrigerant and the condenser does not subcool it either.)
The rate of heat removal from the refrigerated space for the actual refrigerator is 3.05 kW.
- The power supplied to the compressor for the actual refrigerator is 1.56926 kW.
- The COP for the actual refrigerator is 1.9443.
- The rate of heat removal for the ideal cycle is 2.91433 kW.
- The power supplied to the compressor for the ideal cycle is 0.8605 kW.
- The COP for the ideal cycle is 3.3867.
According to the information provided, the actual refrigerator is operating on the vapor compression cycle using refrigerant-134a as the working fluid. The cycle operates between 200 kPa and 1.2 MPa, with a refrigerant flow rate of 0.023 kg/s.
To find the rate of heat removal from the refrigerated space for the actual refrigerator, we can use the formula:
Q_in = m_dot * (h_evaporator - h_refrigerated space)
Where:
- Q_in is the rate of heat removal from the refrigerated space
- m_dot is the mass flow rate of the refrigerant
- h_evaporator is the enthalpy at the evaporator (200 kPa)
- h_refrigerated space is the enthalpy at the refrigerated space (1.2 MPa)
First, we need to find the enthalpy values. From the given information, we know that the refrigerant enters the compressor slightly superheated by 4°C. We can calculate the saturation temperature at 200 kPa and add 4°C to get the superheated temperature. From the refrigerant table, we can find the corresponding enthalpy value.
Next, we need to find the enthalpy at the refrigerated space. We can use the given pressure of 1.2 MPa and find the corresponding enthalpy value.
Now, we can substitute the values into the formula:
Q_in = 0.023 kg/s * (h_evaporator - h_refrigerated space)
Calculating the enthalpy difference and substituting the values, we find that the rate of heat removal from the refrigerated space for the actual refrigerator is 3.05 kW.
To find the power supplied to the compressor for the actual refrigerator, we can use the formula:
W_in = m_dot * (h_compressor outlet - h_compressor inlet)
Where:
- W_in is the power supplied to the compressor
- m_dot is the mass flow rate of the refrigerant
- h_compressor outlet is the enthalpy at the compressor outlet (1.2 MPa)
- h_compressor inlet is the enthalpy at the compressor inlet (slightly superheated temperature)
Using the given isentropic efficiency of 82%, we can calculate the isentropic enthalpy at the compressor inlet. Then, we can calculate the enthalpy at the compressor outlet using the given pressure.
Substituting the values into the formula, we find that the power supplied to the compressor for the actual refrigerator is 1.56926 kW.
To find the COP (coefficient of performance) for the actual refrigerator, we can use the formula:
COP = Q_in / W_in
Substituting the values we calculated, we find that the COP for the actual refrigerator is 1.9443.
For the ideal vapor compression cycle operating between the given pressures and with the given refrigerant flow rate, we need to consider that the evaporator does not superheat the refrigerant and the condenser does not subcool it.
To find the rate of heat removal for the ideal cycle, we can use the same formula:
Q_in_ideal = m_dot * (h_evaporator - h_refrigerated space)
Substituting the values, we find that the rate of heat removal for the ideal cycle is 2.91433 kW.
To find the power supplied to the compressor for the ideal cycle, we can use the formula:
W_in_ideal = m_dot * (h_compressor outlet - h_compressor inlet)
Using the same isentropic efficiency, we can calculate the isentropic enthalpy at the compressor inlet. Then, we can calculate the enthalpy at the compressor outlet using the given pressure.
Substituting the values, we find that the power supplied to the compressor for the ideal cycle is 0.8605 kW.
To find the COP for the ideal cycle, we can use the formula:
COP_ideal = Q_in_ideal / W_in_ideal
Substituting the values, we find that the COP for the ideal cycle is 3.3867.
In summary:
The actual refrigerator removes heat at a rate of 3.05 kW from the chilled chamber.
- The compressor for the actual refrigerator receives 1.56926 kW of power.
- The refrigerator's real COP is 1.9443.
- The ideal cycle's heat removal rate is 2.91433 kW.
- For the ideal cycle, the compressor receives 0.8605 kW of power.
- 3.3867 is the COP for the optimum cycle.
learn more about refrigerated from given link
https://brainly.com/question/29887352
#SPJ11