solid zinc is combined with aqueous iron(iii) sulfate. how many grams of zinc are necessary to completely react with 0.400 l of 4.60 m fe2(so4)3?

To find the number of moles of NaOH present in 30.0 mL of 0.140 M NaOH, we can use the formula:

moles of solute = concentration x volume

where "solute" refers to the substance of interest (in this case, NaOH), "concentration" is the molarity of the solution, and "volume" is the volume of the solution in liters.

First, we need to convert the volume of the solution from milliliters to liters:

30.0 mL = 30.0/1000 = 0.030 L

Next, we can substitute the given values into the formula:

moles of NaOH = 0.140 mol/L x 0.030 L = 0.0042 moles

Therefore, there are 0.0042 moles of NaOH present in 30.0 mL of 0.140 M NaOH.

Boyle's Law-

[tex]\:\:\:\:\:\:\:\:\:\:\:\star\:\sf \underline{ P_1 \: V_1=P_2 \: V_2}\\[/tex]

(Pressure is inversely proportional to the volume)

Where-

As per question, we are given that -

Now that we have all the required values and we are asked to find out the final pressure, so we can put the values and solve for the final pressure of nitrogen -

[tex]\:\:\:\:\:\:\:\:\:\:\:\:\:\:\:\star\:\sf \underline{ P_1 \: V_1=P_2 \: V_2}[/tex]

[tex]\:\:\:\: \:\:\:\:\:\:\longrightarrow \sf 2.56\times 750 = P_2 \times 985\\[/tex]

[tex] \:\:\:\:\:\:\:\:\:\:\longrightarrow \sf P_2 = \dfrac{2.56 \times 750}{985}\\[/tex]

[tex] \:\:\:\:\:\:\:\:\:\:\longrightarrow \sf P_2 = \cancel{\dfrac{ 1920}{985}}\\[/tex]

[tex]\:\:\:\: \:\:\:\:\:\:\longrightarrow \sf P_2 = 1.94923........ \\[/tex]

[tex] \:\:\:\:\:\:\:\:\:\:\longrightarrow \sf \underline{P_2 = 1.95 \: atm}\\[/tex]

Therefore,the pressure will become 1.95 atm if the volume becomes 985mL.

Valentina will need to modify the air mass model by spreading out the air molecules, reducing the density of the air mass, adding cloud symbols and water droplets, and adding arrows to show wind direction and speed.

When an air mass comes into contact with a warm front, several changes occur in the air mass. Valentina will need to modify the model to reflect these changes.

First, as the air mass moves towards the warm front, it will encounter warmer air. This will cause the air molecules in the air mass to speed up and spread out. Valentina can represent this by spreading out the dots that represent the air molecules in the air mass.

Second, as the air molecules spread out, the density of the air mass will decrease. Valentina can represent this by reducing the number of dots in the air mass model.

Third, as the air mass rises over the warm front, it will cool down due to the lower atmospheric pressure. This can cause water vapor in the air mass to condense, forming clouds. Valentina can add cloud symbols to the model to represent this change.

Fourth, the warm front will also bring moisture into the air mass. Valentina can represent this by adding water droplets to the air mass model.

Fifth, as the warm front moves in, it will cause changes in wind direction and speed. Valentina can add arrows to the model to show the direction and speed of the wind.

Learn more about air here:

https://brainly.com/question/19368011

#SPJ1

The decrease in temperature of a gas when compressed can be calculated using the ideal gas law, which relates the pressure, volume, temperature, and number of particles of a gas.

The ideal gas law is expressed as PV = nRT, where P is the pressure, V is the volume, n is the number of particles, R is the gas constant, and T is the temperature.

To calculate the decrease in temperature, we first need to determine the initial conditions of the gas. At 8.5 L and 25.0 °C, we can assume that the pressure is constant and that the number of particles is also constant. Therefore, we can write:

P1V1/T1 = P2V2/T2

where P1 is the initial pressure, V1 is the initial volume, T1 is the initial temperature, P2 is the final pressure, V2 is the final volume, and T2 is the final temperature.

Plugging in the values, we get:

P1 × 8.5 L / 25.0 °C = P2 × 4.00 L / T2

Simplifying and solving for T2, we get:

T2 = (P2 × 4.00 L × 25.0 °C) / (P1 × 8.5 L)

Assuming that the pressure remains constant, we can simplify the equation further:

T2 = (4.00 L × 25.0 °C) / 8.5 L

T2 = 11.8 °C

Therefore, the decrease in temperature is:

25.0 °C - 11.8 °C = 13.2 °C

In summary, when 8.5 L of gas at 25.0 °C is compressed to 4.00 L, the temperature decreases by 13.2 °C.

To know more about ideal gas law, visit:

https://brainly.com/question/28257995

#SPJ1

Answer:

1.39 mL

Explanation:

To determine the volume of 18.0 Molarity [tex]H_{2} SO_4[/tex] needed to contain 2.45 grams of [tex]H_{2} SO_4[/tex], we can use the following formula:

moles of solute = mass of solute / molar mass of solute

Then, we can use the molarity formula:

Molarity = moles of solute / volume of solution (in liters)

Rearranging this formula, we get:

volume of solution (in liters) = moles of solute / Molarity

First, we need to calculate the moles of [tex]H_{2} SO_4[/tex]:

moles of [tex]H_{2} SO_4[/tex] = mass of [tex]H_{2} SO_4[/tex] / molar mass of [tex]H_{2} SO_4[/tex]

The molar mass of [tex]H_{2} SO_4[/tex] is:

2(1.008 g/mol) + 32.06 g/mol + 4(16.00 g/mol) = 98.08 g/mol

Therefore, the moles of [tex]H_{2} SO_4[/tex] are:

moles of [tex]H_{2} SO_4[/tex] = 2.45 g / 98.08 g/mol = 0.02497 mol

Next, we can calculate the volume of 18.0 Molarity [tex]H_{2} SO_4[/tex] needed:

volume of solution (in liters) = moles of solute / Molarity

volume of solution (in liters) = 0.02497 mol / 18.0 mol/L = 0.001387 L

Finally, we can convert the volume to milliliters:

volume of solution (in mL) = 0.001387 L x 1000 mL/L = 1.39 mL

Therefore, approximately 1.39 mL of 18.0 Molarity [tex]H_{2} SO_4[/tex] is needed to contain 2.45 grams of [tex]H_{2} SO_4[/tex].

To increase the yield of a reaction sometimes excess reagents maybe helpful. Certain cases it can cause negative effects also in the outcome of a reaction.

Assume a student using acetone as a solvent. Adding two-fold excess of acetone. It probably not have a significant effect on the outcome of the reaction.

Acetone is a common organic solvent. It is often used in reactions as a reaction medium or as a solvent to dissolve the starting materials.

But if the student is adding a two-fold excess of acetone as a reactant, it can lead to chemical reaction. it can lead to the formation of unwanted byproducts. Also interfere with the desired reaction.

Information of specific reaction is not given. So it is not possible to determine what product they are likely to isolate.

Learn more about reagents:

https://brainly.com/question/31171741

#SPJ4

The pH of the buffer containing acetic acid and sodium actetate is found to be 1.14.

The pH of a solution containing the acid and the salt is given as,

pH = pKa + log[acid]/[salt]

In this case it is given that buffer containes 0.31M of acetic acid and 0.27M of sodium acetate. The pKa value of acetic acid is given to be 4.71. Now, as be have all the values, putting them in the formula and proceeding,

pH = (4.72) + log[0.31]/[0.27]

pH = 4.72 - 2.86

pH = 1.85

Hence, the pH of the buffer is found to be 1.14.

To know more about pH of buffer solution, visit,

https://brainly.com/question/22390063

#SPJ4

The correct option is C. The plant will bend toward the light. In response to a light stimulus, a plant will bend or grow towards the light source to optimize its photosynthesis and growth.

Plants have a natural tendency to grow towards light sources, a behavior called phototropism. When a plant receives a light stimulus, a hormone called auxin is produced in the plant's stem, which moves towards the shaded side of the stem.

This accumulation of auxin on the shaded side causes the cells on that side to elongate and the plant bends towards the light source. This bending allows the plant to maximize its exposure to light, which is essential for photosynthesis, the process by which plants produce food.

For more question on photosynthesis click on

https://brainly.com/question/17036376

#SPJ11

The Ka of the unknown acid is 3.98 x 10⁻².

To find the Ka of the unknown acid, we need to use the Henderson-Hasselbalch equation, which relates the pH, pKa, and the concentrations of the acid and its conjugate base:

pH = pKa + log([A⁻]/[HA])

where [A⁻] will be the concentration of the conjugate base and [HA] will be the concentration of the acid.

At the halfway point of the titration, where 11.1 mL of base has been added, we can assume that the moles of acid (HA) and the moles of base (OH⁻) are equal. Therefore, we can calculate the initial concentration of the acid (before any base is added) using the volume of acid and its known molarity;

moles of acid = volume of acid (in L) x molarity of acid

moles of acid = 0.025 L x 0.100 M = 0.0025 moles

Since we added an equal amount of base, the concentration of the acid is now half of its original concentration;

concentration of acid = 0.100 M / 2 = 0.050 M

The concentration of the conjugate base can be calculated as follows;

concentration of base = volume of added base (in L) x molarity of base

concentration of base = 11.1 mL x (1 L / 1000 mL) x 0.100 M = 0.00111 M

Using the equation above and the given pH of 5.41, we can solve for the pKa;

5.41 = pKa + log([0.00111]/[0.050])

-0.59 = pKa - log(45.05)

-0.59 + log(45.05) = pKa

pKa = 1.46

Finally, we can use the relationship between Ka and pKa to find the Ka:

Ka = [tex]10^{(-pKa)}[/tex]

Ka = [tex]10^{(-1.46)}[/tex]

Ka = 3.98 x 10⁻²

To know more about Henderson-Hasselbalch equation here

https://brainly.com/question/13423434

#SPJ4

Methanotrophs oxidize only methane completely, while methylotrophs can oxidize any compound containing a methyl group.

Methanotrophs and methylotrophs are two kinds of microorganisms that are equipped for oxidizing various sorts of mixtures.

Methylotrophs can oxidize any compound containing a methyl bunch, including methane. Interestingly, methanotrophs are a subset of methylotrophs that are explicitly adjusted to oxidize methane as their only wellspring of carbon and energy. Methanotrophs can totally oxidize methane to carbon dioxide, while methylotrophs can somewhat oxidize methane to carbon dioxide.

Methanotrophs can't oxidize different mixtures containing a methyl bunch, while methylotrophs can oxidize a more extensive scope of methyl-containing compounds. This is on the grounds that methylotrophs have a more different arrangement of chemicals that can oxidize different methyl-containing compounds. Methanotrophs, then again, have a particular arrangement of catalysts that are adjusted explicitly for the oxidation of methane.

To learn more about methanotroph and methylotroph, refer:

https://brainly.com/question/28386007

#SPJ4

Therefore, the volume of the rectangle is approximately 39.82045 cm³.

By simply understanding the length of a square box's sides, we can determine its volume. The square root of the length of a square box's edge gives the volume of a square box. V = s3, where s is the length of the square box's edge, is the formula for volume.

First, using the conversion formula 1 inch = 2.54 cm, we must convert the rectangle's length and breadth from inches to centimetres:

Length = 4.55 inches x 2.54 cm/inch = 11.561 cm

Width = 3.45 cm

Now we can calculate the volume of the rectangle:

Volume = Length x Width x Height

Volume = 11.561 cm x 3.45 cm x 1 cm

Volume = 39.82045 cm³ (rounded to five significant figures).

To know more about volume visit:-

https://brainly.com/question/24189159

#SPJ1

If your titration solution is 0.427 M in NaOH, and the endpoint occurs at 13.70 mL of titrant, the number of mmol of NaOH required to reach the endpoint is 5.830 mmol.

To calculate the number of mmol of NaOH required to reach the endpoint, we can use the following formula: mmol NaOH = M NaOH x V NaOH where, M NaOH = molarity of NaOH V NaOH = volume of NaOH used in the titration. By substituting the given values in the above formula, we get; mmol NaOH = 0.427 M x 13.70 mL= 5.830 mmol. Therefore, the number of mmol of NaOH required to reach the endpoint is 5.830 mmol.

To know more about NaOH click here:

brainly.com/question/22609288

#SPJ11

Answer:is a trace metal of severe toxicity. Its health concerns via consumption of contaminated vegetables have often been overlooked or underestimated

Explanation: Read it carefully and it explains

Charles's Law-

[tex]\:\:\:\:\:\: \:\:\:\:\:\:\star\longrightarrow\sf \underline{\dfrac{V_1}{T_1}=\dfrac{V_2}{T_2}}\\[/tex]

Where:-

As per question, we are given that -

Now that we have obtained all the required values, so we can put them into the formula and solve for V₂ :-

[tex]\:\:\:\:\:\: \:\:\:\:\:\:\star\longrightarrow\sf \underline{\dfrac{V_1}{T_1}=\dfrac{V_2}{T_2}}\\[/tex]

[tex] \:\:\:\:\:\:\:\:\:\:\:\:\longrightarrow \sf V_2= \dfrac{V_1}{T_1}\times T_2\\[/tex]

[tex] \:\:\:\:\:\:\:\:\:\:\:\:\longrightarrow \sf V_2= \dfrac{600}{350}\times 359\\[/tex]

[tex] \:\:\:\:\:\:\:\:\:\:\:\:\longrightarrow \sf V_2= 1.71428..............\times 359\\[/tex]

[tex]\:\:\:\:\:\: \:\:\:\:\:\:\longrightarrow \sf V_2 =615.4285................\\[/tex]

[tex] \:\:\:\:\:\:\:\:\:\:\:\:\longrightarrow \sf\underline{ V_2= 615.42\:mL}\\[/tex]

Therefore, the new volume of the gas will become 615.42 mL when pressure remains constant.

The property is not an important property of water is the water is clear. This is the correct option.

Important properties of water include:

1. High specific heat: Water can absorb or release a significant amount of heat without changing its temperature much, which helps regulate temperatures in the environment.

2. Solvent ability: Water is often called the "universal solvent" because it can dissolve many substances, making it essential for various chemical processes.

3. Ice expansion: When water freezes, it expands and becomes less dense, causing ice to float on water. This property helps insulate bodies of water in cold temperatures, protecting aquatic life.

4. Liquidity of water: Water's liquidity allows it to flow and transport nutrients, waste, and other materials in nature and within organisms.

to know more about properties of water refer here:

https://brainly.com/question/28723130#

#SPJ11

Any application that requires a durable and aesthetically pleasing material that can be easily cut into straight lines would be a good use of sandstone.

Sandstone's durability and ease of cutting make it suitable for various uses, including:

For more question on sandstone click on

https://brainly.com/question/30494102

#SPJ11

The concentration of Fe2+ in a 0.1 M solution of [Fe(CN)6]4- is 3.98 x 10^-31 M.

The molar concentration of Fe2+ can be calculated using the following equation:Kf = [Fe2+][CN-]6 / [Fe(CN)6]4-Kf is the formation constant for [Fe(CN)6]4-, which is given as 1 x 1037 in the question.[Fe(CN)6]4- is present in a concentration of 0.1 M, which means [Fe(CN)6]4- = 0.1 M.

Substituting these values into the equation gives:1 x 1037 = [Fe2+][CN-]6 / 0.1M Rearranging the equation gives:[Fe2+] = (1 x 1037)(0.1M) / [CN-]6The concentration of CN- can be found using the charge balance equation:[Fe(CN)6]4- + Fe2+ ⇌ [Fe(CN)6]3- + Fe3+The overall charge on the left side is -4 + 2 = -2

The overall charge on the right side is -3 + 3 = 0Therefore, 2 moles of CN- are released for every mole of [Fe(CN)6]4-. The concentration of CN- is thus:[CN-] = 2[Fe(CN)6]4- = 2(0.1 M) = 0.2 M

Substituting this value into the equation for [Fe2+] gives:[Fe2+] = (1 x 1037)(0.1M) / (0.2M)6 = 3.98 x 10^-31 M

To know more about molar concentration refer to-

brainly.com/question/21841645#

#SPJ11

The half-cell that houses the cathode is Half-cell B. The voltage of the cell is approximately 0.0297 V.

In a concentration cell, the cathode is the half-cell with the higher concentration of electrolyte. In this case, half-cell B has a higher concentration (0.87 M) compared to half-cell A (0.13 M).

Cathode: Half-cell B

To calculate the voltage of the cell, we can use the Nernst equation:

E_cell = E° - (RT/nF) * ln(Q)

For a Sn/Sn²⁺ concentration cell, the standard cell potential E° = 0 V, as both half-cells have the same redox reaction. The reaction quotient Q = [Sn²⁺ (A)] / [Sn²⁺ (B)].

Substituting the values and considering room temperature (25°C or 298.15 K), we get:

E_cell = 0 - ((8.314 J/mol·K * 298.15 K) / (2 * 96485 C/mol) * ln(0.13 M / 0.87 M)

E_cell ≈ 0.0297 V

Voltage of cell: 0.0297 V

Learn more about cathode here: https://brainly.com/question/30699531

#SPJ11

The balanced equation for the dissolution of ammonium bromide in water that gives an acidic solution is [tex]NH4Br + H2O → NH4+ + Br- + H+ + OH-.[/tex]

The equation is balanced because the number of atoms of each element is equal on both sides of the equation.

Ammonium bromide is a salt that, when dissolved in water, produces an acidic solution.

When ammonium bromide (NH4Br) is dissolved in water, it dissociates into NH4+ and Br- ions, as well as a small amount of H+ ions and OH- ions produced by the autoionization of water (H2O → H+ + OH-).

The reaction can be represented by the following balanced chemical equation:NH4Br + H2O → NH4+ + Br- + H+ + OH-In the equation, the NH4+ and Br- ions are spectator ions that do not participate in the acid-base reaction.

Instead, the H+ ions combine with the OH- ions to form water (H+ + OH- → H2O), leaving behind a net concentration of H+ ions that make the solution acidic.

To know more about balanced equation refer to-

brainly.com/question/7181548#
#SPJ11

One will need to add 10 times the millimoles of acetic acid as acetate to achieve the desired pH of 5.74 in your solution

To determine the amount of acetate (the conjugate base of acetic acid) needed to add to the solution, we need to use the Henderson-Hasselbalch equation:
pH = pKa + log([A-] / [HA])
Where pH is the desired pH of the solution, pKa is the acid dissociation constant of acetic acid (4.74), [A-] represents the concentration of acetate (conjugate base), and [HA] represents the concentration of acetic acid.
First, decide the desired pH of the solution. Once you have the desired pH, you can solve for the ratio of [A-] / [HA] using the Henderson-Hasselbalch equation.
For example, let's say the desired pH is 5.74:
5.74 = 4.74 + log([A-] / [HA])
Rearrange the equation to solve for the ratio:
1 = log([A-] / [HA])
To remove the logarithm, use the inverse function (10^x):
10^1 = [A-] / [HA]
So the ratio of [A-] / [HA] is 10.
Now, if you know the millimoles of acetic acid (HA), you can calculate the millimoles of acetate (A-) needed:
millimoles of acetate (A-) = millimoles of acetic acid (HA) * ratio
Replace the known values and solve for the millimoles of acetate:
millimoles of acetate (A-) = millimoles of acetic acid * 10
So, you will need to add 10 times the millimoles of acetic acid as acetate to achieve the desired pH of 5.74 in your solution. Adjust the desired pH value accordingly for your specific needs.

For more such questions on pH

https://brainly.com/question/16423209

#SPJ11

Coefficients: Ni2+ (aq) + Zn(s) → Ni(s) + Zn2+ (aq); Water: neither, coefficient=0; Reducing agent: Zn.

The fair condition for the given skeletal condition is:

Ni2+ (aq) + Zn (s) → Ni (s) + Zn2+ (aq)

The coefficients of the species shown are 1 for Ni2+, 1 for Zn, 1 for Ni, and 1 for Zn2+.Water doesn't show up in the decent condition since it isn't associated with the response.The lessening specialist is Zn since it loses electrons and goes through oxidation. In this response, Zn is oxidized from its essential state to shape Zn2+ particles, while Ni2+ particles are diminished to frame Ni metal.Generally, the decent condition shows a solitary relocation response where Zn replaces Ni2+ in answer for structure Zn2+ and Ni metal.

To learn more about equation balanced under acidic conditions, refer:

https://brainly.com/question/30216035

#SPJ4

Answer:

Hydroxide

Explanation:

In chemistry, a conjugate base is the species that remains after an acid has donated a proton (H+) to a base. Water (H2O) can act as an acid and donate a proton to a base, such as the hydroxide ion (OH-), according to the following equation: H2O + OH- → H3O+ In this reaction, water donates a proton (H+) to the hydroxide ion (OH-) to form the hydronium ion (H3O+), which is the conjugate acid of water. The hydroxide ion (OH-) is left behind and can be considered as the conjugate base of water.Therefore, the hydroxide ion is the conjugate base of water because it is formed when water acts as an acid and donates a proton to a base

The conjugate base of water is "hydroxide".

In water, the hydrogen ions (H+) can dissociate from the water molecule, leaving behind a hydroxide ion (OH-) as the conjugate base. This can be represented by the following chemical equation:

H2O + H+ ↔ H3O+

In this equation, H2O is the water molecule, H+ is the hydrogen ion, and H3O+ is the hydronium ion, which is the conjugate acid of water. The hydroxide ion (OH-) is the conjugate base of water.

Therefore, the correct answer is "hydroxide".

For more questions like water visit the link below:

https://brainly.com/question/31214584

#SPJ11

The balanced chemical equation for the reaction of HCl with CaCO3 is:

2 HCl + CaCO3 → CaCl2 + CO2 + H2O

From the equation, we can see that 1 mole of CaCO3 reacts with 2 moles of HCl.

The number of moles of HCl in 0.500 L of 0.400 M HCl is:

n(HCl) = C(HCl) x V(HCl)

n(HCl) = 0.400 mol/L x 0.500 L

n(HCl) = 0.200 mol

Since 1 mole of CaCO3 reacts with 2 moles of HCl, the number of moles of CaCO3 needed to neutralize the HCl is:

n(CaCO3) = 0.200 mol / 2 = 0.100 mol

The mass of CaCO3 needed to neutralize the HCl is:

m(CaCO3) = n(CaCO3) x M(CaCO3)

m(CaCO3) = 0.100 mol x 100.09 g/mol

m(CaCO3) = 10.01 g

Each Tums tablet weighs 1.00 g and contains 40.0% CaCO3 by mass, so the mass of CaCO3 in one tablet is:

m(CaCO3) = 1.00 g x 0.40

m(CaCO3) = 0.40 g

To obtain 10.01 g of CaCO3, we need:

n(tablets) = m(CaCO3) / m(tablet)

n(tablets) = 10.01 g / 0.40 g/tablet

n(tablets) = 25 tablets

Therefore, we need 25 Tums tablets to neutralize the HCl. The cost of one Tums container is $4.00 and contains 80 tablets, so the cost of 25 tablets is:

cost = (25 tablets / 80 tablets) x $4.00

cost = $1.25

Therefore, it costs $1.25 to neutralize 0.500 L of 0.400 M HCl using Tums tablets.

To know more about neutralization reaction, visit the link below:

https://brainly.com/question/28970253

#SPJ4

After dissolving in solution, the following a strong acid dissociates completely in solution to produce its conjugate and the conjugate of the strong acid is the ion this applies. Here options B and D are the correct answer.

A strong acid is one that completely dissociates into its constituent ions in an aqueous solution. This means that all of the acid molecules break apart into hydrogen ions (H+) and the corresponding anions. Therefore, option B is correct, while option A is incorrect.

The conjugate base of a strong acid is an anion because the hydrogen ion (H+) has been removed from the acid molecule. This anion may be neutral or basic in solution, depending on the identity of the anion. Therefore, option E is correct, while options C and D are incorrect. Finally, the conjugate of a strong acid is not a cation, so option F is also incorrect.

To learn more about strong acid

https://brainly.com/question/31143763

#SPJ4

Complete question:

Which of the following applies to a strong acid once it dissolves in solution?

A. It dissociates partially in solution to produce its conjugate

B. It dissociates completely in solution to produce its conjugate

C. The conjugate of a strong acid is neutral in pH when in solution

D. The conjugate of a strong acid is basic in the solution

E. The conjugate of a strong acid is an anion

F. The conjugate of a strong acid is a cation

Due to the strong intramolecular interactions caused by the compound's ionic structure, barium sulfate has a high melting point. Its low water solubility is a result of the molecules' weak intermolecular interactions.

The lattice structure is too stable to be disturbed by water molecules because of the intense electrostatic attraction between the barium and sulfate ions. Also, because the substance is ionic, water molecules cannot efficiently dissolve the ions. Generally, barium sulfate has strong intramolecular forces that contribute to its high melting point, but weak intermolecular forces and an ionic character that causes it to be poorly soluble in water.

To sum, the barium cations and sulfate anions possess high intra - molecular energies, which lead to an elevated melting temperature.

Learn more about Barium Sulfate:

https://brainly.com/question/2782682

Answer:

The Peanut contains chemical energy and when consumed will be turned into kenetic energy

The amount of heat required to vaporize 100.0 g of ethanol at its boiling point is 83.78 kJ.

In order to calculate the amount of heat required to vaporize 100.0 g of ethanol at its boiling point, we can use the formula Q = n * ΔHv, where Q is the amount of heat required, n is the number of moles of ethanol, and ΔHv is the enthalpy of vaporization of ethanol.

To find the number of moles of ethanol in 100.0 g, we can divide the mass by the molar mass of ethanol, which is 46.07 g/mol:moles = mass / molar mass moles = 100.0 g / 46.07 g/mol moles = 2.172 mol.

Now we can use the formula Q = n * ΔHv to calculate the amount of heat required to vaporize 100.0 g of ethanol:Q = n * ΔHvQ = 2.172 mol * 38.6 kJ/molQ = 83.78 kJ.

View more such questions on vaporize :

https://brainly.com/question/26306578

#SPJ11

The false statement about elements is a. an element contains multiple substances.

An element contains only one type of atom and therefore only one substance. The other statements are true: an element has distinct properties, it is a form of matter, and it contains only one substance. Elements are substances made up of only one type of atom. They are the simplest forms of matter and cannot be broken down into simpler substances by chemical reactions. Each element has its own unique set of properties, such as melting and boiling points, density, and reactivity.

These properties are determined by the number of protons in the nucleus of the atom. An element is a pure substance that cannot be broken down into simpler substances by chemical means, it is made up of only one type of atom, which has a specific number of protons in its nucleus. This number determines the element's atomic number and its unique set of properties. So, the false statement about elements is a. an element contains multiple substances.  

Learn more about atomic number at:

https://brainly.com/question/30940863

#SPJ11

I would predict that copper will have the highest specific heat capacity among copper, granite, and lead.

This is because metals generally have higher specific heat capacities than nonmetals, and copper is a metal. Copper is also known to have a relatively high specific heat capacity compared to other metals, making it a good conductor of heat and able to absorb and retain thermal energy well. On the other hand, lead has a relatively low specific heat capacity, and granite, being a type of rock, will likely have a moderate specific heat capacity but still lower than copper.

Learn more about heat capacity

https://brainly.com/question/28302909

#SPJ4

In an activity involving the use of bromothymol blue solution and Cabomba (an aquatic plant), the purpose of having two tubes containing bromothymol blue solution without the Cabomba is to serve as control tubes.

The control tubes allow us to compare the changes in color and pH of the solution in the experimental tubes (i.e., the tubes with Cabomba) to the changes in the solution without Cabomba.

The bromothymol blue solution changes color in response to changes in pH, so if the solution in the experimental tube turns yellow (indicating a decrease in pH) while the solution in the control tube remains blue, we can conclude that the decrease in pH is due to the activity of the Cabomba. On the other hand, if both the experimental and control tubes turn yellow, we cannot attribute the change in pH solely to the activity of the Cabomba, as there may be other factors affecting the pH of the solution.

By having control tubes, we can ensure that any observed changes in the experimental tubes are due to the activity of the Cabomba and not due to some other factor. This helps to ensure the accuracy and reliability of the experimental results.

To know more about bromothymol here

https://brainly.com/question/30150766

#SPJ4