Sandstone is made up of sand-sized grains of minerals and stones. Most of the minerals in sandstone are ones that are not very valuable, such as quartz. Sandstone is easy to cut in straight lines. It usually lasts a long time, even out in the wind and rain.


Which of these would be a good use of sandstone?

B. causes the air masses to become warmer. The Gulf Stream is a warm ocean current that flows from the Gulf of Mexico into the Atlantic Ocean.

The Gulf Stream is a powerful ocean current that transports warm water from the Gulf of Mexico into the Atlantic Ocean. This warm water is carried northward along the eastern coast of the United States and across the Atlantic towards Europe. The warm water of the Gulf Stream also has an impact on the atmosphere above it.

As warm water from the Gulf Stream evaporates, it adds moisture to the air above it, making the air warmer and more humid. This process is known as evaporation-induced cooling, and it can have a significant impact on the weather and climate of the regions surrounding the Gulf Stream.

The warm and moist air above the Gulf Stream creates instability in the atmosphere, which can lead to the formation of thunderstorms and other weather events. The Gulf Stream also affects the formation of hurricanes and other tropical storms, as it provides the warm water and moist air needed for these storms to develop.

Learn more about Gulf Stream  here:

https://brainly.com/question/25914269

#SPJ1

The empirical formula of the compound is Na2S.

To find the number of moles of each element in the compound, we divide the mass of each element by its atomic mass.

The atomic masses of sodium, sulfur, and oxygen are 22.99 g/mol, 32.06 g/mol, and 16.00 g/mol, respectively.

Thus, the number of moles of sodium in the compound is

0.979 g/22.99 g/mol = 0.0425 mol.

Similarly, the number of moles of sulfur and oxygen in the compound are

1.365 g/32.06 g/mol = 0.0425 mol and

1.021 g/16.00 g/mol = 0.0638 mol,

The next step is to determine the empirical formula of the compound. To do this, we need to find the simplest whole number ratio of the atoms in the compound. The simplest whole number ratio of the atoms in the compound is obtained by dividing the number of moles of each element by the smallest number of moles obtained.

In this case, the smallest number of moles obtained is 0.0425 mol, which corresponds to the number of moles of sodium and sulfur in the compound.

.

to learn more about: Empirical formula

https://brainly.com/question/1603500

#SPJ11

A decrease in temperature during a chemical reaction indicates that the system has lost energy to the surroundings and is because the energy released during the reaction is transferred from the system to the surroundings in the form of heat.

The type of process that causes a decrease in temperature during a chemical reaction is known as an exothermic process. In exothermic reactions, energy is released from the system in the form of heat and transferred to the surroundings, resulting in a decrease in the energy of the system. Exothermic reactions are commonly observed in combustion reactions, where a fuel reacts with oxygen to produce heat and light energy.

It is important to note that the amount of energy released during an exothermic reaction can vary depending on the specific reactants and conditions involved. In some cases, exothermic reactions can release a significant amount of energy, such as in the case of explosive reactions. In other cases, the energy released may be relatively small and not readily apparent, such as in the case of rusting of iron.

In summary, a decrease in temperature during a chemical reaction is an indication of an exothermic process, where energy is released from the system to the surroundings in the form of heat.

Learn more about Chemical reactions here:

brainly.com/question/29039149

#SPJ4

Milk of magnesia is a suspension of magnesium hydroxide in water, and its chemical formula is Mg(OH)2. When this compound dissolves in water, it dissociates into Mg2+ and OH- ions.

The pH of a solution is a measure of its acidity or basicity. A pH of 10.5 indicates that the solution is basic.

To find the hydronium ion concentration, using the relationship between the pH and the hydronium ion concentration:

pH = -log[H3O+]

Solving for [H3O+], shown as

[H3O+] = 10^(-pH)

Substituting the pH of 10.5, we get:

[H3O+] = 10^(-10.5)

[H3O+] = 3.16 x 10^(-11) M

Therefore, the hydronium ion concentration of the saturated solution of milk of magnesia is 3.16 x 10^(-11) M.

Since the hydronium ion concentration is very low, the solution is basic.

Learn more about hydronium ions, here:

https://brainly.com/question/12415857

#SPJ4

You can calculate the molar mass of CaCO3, which is equal to the sum of the atomic masses of calcium, carbon, and three oxygen atoms.

The atomic mass of calcium is 40.078 g/mol, carbon is 12.011 g/mol, and oxygen is 15.999 g/mol.

So, the molar mass of CaCO3 is:

Molar mass of CaCO3 = (1 × 40.078 g/mol) + (1 × 12.011 g/mol) + (3 × 15.999 g/mol)

= 100.086 g/mol

The molar mass of CaCO3 can also be calculated using the atomic weights of the elements, which are found on the periodic table. Once you know the molar mass of CaCO3, you can calculate the number of moles of CaCO3 used to write your name, based on the mass of chalk used.

Method 2:You can use the Avogadro constant to convert the number of moles of CaCO3 used to write your name into the number of formula units of CaCO3. Since each formula unit of CaCO3 contains one carbon atom, you can then determine the number of carbon atoms in your signature.

Method 3:Alternatively, you can use the stoichiometry of the reaction that occurs when CaCO3 is used to write on a surface. When CaCO3 is used to write on a surface, it reacts with carbon dioxide (CO2) in the air to form calcium oxide (CaO) and carbon dioxide (CO2).

The balanced chemical equation for this reaction is:

CaCO3(s) + CO2(g) → CaO(s) + CO2(g) + Heat

From this equation, you can see that each formula unit of CaCO3 reacts with one molecule of CO2 to produce one carbon atom in the form of CO2. Therefore, the number of carbon atoms in your signature is equal to the number of molecules of CO2 produced during the reaction. To calculate the number of molecules of CO2 produced, you need to know the mass of CaCO3 used to write your name and the volume of CO2 produced. The volume of CO2 can be measured using a gas syringe or a gas collection method. Once you know the volume of CO2, you can convert it to moles of CO2 using the ideal gas law, and then to molecules of CO2 using Avogadro's number.

To learn more about: molar mass

https://brainly.com/question/21334167

#SPJ11

Answer:

Option B

Explanation:

The increased use of non-renewable resources, rising pollution levels, global warming, and the possible loss of natural ecosystems are all effects of economic expansion on the environment.

Many human activities such as overcrowding, pollution, the use of fossil fuels, and forestry have an adverse effect on the physical environment. Global warming, soil degradation, poor air quality, even undrinkable water have all been brought on by changes like these.

Several particular environmental problems can be detrimental to people's health and wellbeing. Environmental contamination, air pollution, global warming, pathogenic bacteria, lack of healthcare access, insufficient infrastructure, or poor water quality are some of these problems.

To know more about natural visit:

https://brainly.com/question/15325233

#SPJ1

(a) The statement that "NO is a secondary pollutant with a long residence time in the atmosphere" suggests that NO may accumulate in the atmosphere over time and contribute to poor air quality. This could be a potential explanation for high levels of NO in areas with poor air quality.

(b) The statement that "NO does not play a significant role in smog formation" suggests that NO may not be a key contributor to poor air quality in areas with smog. This could be a potential explanation for low levels of NO in areas with smog.

(c) The statement that "NO is formed in the lower atmosphere in the morning by the rising sun" suggests that NO may be more prevalent in the atmosphere during certain times of day. This could be a potential explanation for fluctuations in NO concentrations over the course of a day.

(d) The statement that "NO is produced by rush-hour traffic and is quickly oxidized in the atmosphere" suggests that NO may be more prevalent in the atmosphere during rush hour. This could be a potential explanation for higher levels of NO in urban areas during rush hour.

(e) The statement that "NO is quickly absorbed by plants and converted to sugars" suggests that NO may be removed from the atmosphere by vegetation. This could be a potential explanation for lower levels of NO in areas with high vegetation cover.

To know more about oxidized click here

brainly.com/question/9496279

#SPJ4

The sum of all the coefficients of the reaction MnO⁴⁻ + SO₃²⁻ → MnO₂ + SO₄²⁻ after balancing is found to be 16.

Here, is the unbalanced equation ('skeleton equation') of the chemical reaction. All reactants and products must be known. For a better result write the reaction in ionic form.

MnO⁴⁻ + SO₃²⁻ → MnO₂ + SO₄²⁻

Firstly, we balanced the not oxygen and hydrogen compounds by adding the required coefficient in from the the respective element of the reaction in the acidic medium.

Now, then we balance the oxygen atom by adding the water molecules on the opposite side of the required side of the reaction.

It is to be noted that we are using H₂O molecule and OH⁻ for balancing hydrogen molecules because it is in the acidic medium.

Now, the final reaction is,

2MnO₄⁻ + 3Mn²⁺ + 4OH⁻ → 5MnO₂ + 2H₂O

Now, the sum of all coefficients is 16.

To know more about balancing redox reaction, visit,

https://brainly.com/question/27907895

#SPJ4

Complete question - when the balancing of the equation for the reaction,

MnO⁴⁻ + SO₃²⁻ → MnO₂ + SO₄²⁻ taking place in acidic media is properly completed, what is the sum of all the coefficients in the equation?

The bubble in the tip of the burette will lead to an inaccurate final reading of the volume of NaOH at the end point of the titration.

The reading will be biassed high as a result of the bubble. This is so that, without really contributing to the measurement, the bubble will increase the volume of NaOH in the burette.

The bubble is not a component of the measurement, thus any volume it occupies will be added to the final value, making the reading higher than it should be.

As a result, the bubble will produce an unreliable and skewed high reading, which could result in false results.

To learn more about titration visit:

https://brainly.com/question/186765

#SPJ4

4-methylpentane

The response of 4-methyl-2-pentyne with extra hydrogen in the presence of a platinum catalyst is a hydrogenation reaction, which entails the addition of hydrogen atoms across the triple bond of the alkyne. The expected foremost organic product is 4-methylpentane, which is formed through the complete discount of the triple bond to a single bond.

The hydrogenation of 4-methyl-2-pentyne proceeds through a stepwise addition of hydrogen atoms to the triple bond, forming an intermediate alkene and then a saturated alkane. However, the presence of extra hydrogen ensures that the alkene intermediate is quickly decreased to the alkane product, which is the extra thermodynamically secure form.

Therefore, the anticipated main organic product of the hydrogenation reaction of 4-methyl-2-pentyne with extra hydrogen in the presence of a platinum catalyst is 4-methylpentane

learn more about hydrogenation here:brainly.com/question/27594211

#SPJ4

The reducing end of a disaccharide or polysaccharide is not: the end that does not have an anomeric carbon. Therefore, option b is the correct answer.

Option a, the end with an anomeric carbon that can be oxidized, is the reducing end. The anomeric carbon is the carbonyl carbon that is involved in the glycosidic bond. This carbon can be oxidized and can reduce other molecules.

Option c, the end of a chain with free anomeric carbon, is also the reducing end. A free anomeric carbon is not involved in a glycosidic bond, and therefore, it can be oxidized and can reduce other molecules.

Option d, the end whose sugar can take the linear form, is also the reducing end. When the sugar takes the linear form, the anomeric carbon is free and can be oxidized and can reduce other molecules. Therefore, option e is not correct as all of the above options are correct except for option b.

For more such questions on polysaccharide

brainly.com/question/5527351

#SPJ11

The van der Waals parameter 'a' value that should be assigned to CH3CN is 17.58.

To determine the van der Waals parameter (a) value for CH3CN, we must first understand the significance of the van der Waals equation and the parameter "a" itself. The van der Waals equation accounts for the non-ideal behavior of gases by considering the finite size of gas particles and the attractive forces between them.

The "a" parameter represents the strength of the attractive forces between the gas particles.

Generally, larger and more polarizable molecules have higher "a" values due to stronger attractive forces. Now, let's compare the four given gases - CO2, CH3CN, Ne, and CH4.

1. CO2 (carbon dioxide) is a linear, non-polar molecule, but it has a relatively large molecular weight.
2. CH3CN (acetonitrile) is a polar molecule with a cyano group (-C≡N) and a methyl group (-CH3), leading to stronger attractive forces.
3. Ne (neon) is a noble gas with weak attractive forces due to its small size and low polarizability.
4. CH4 (methane) is a non-polar molecule with a smaller size compared to CO2 and CH3CN.

Based on this information, we can roughly rank the gases in terms of their expected "a" values: CH3CN > CO2 > CH4 > Ne.

Now, let's match the given values (0.2107, 2.253, 3.392, 17.58) to the compounds:

1. Ne has the smallest "a" value, so it corresponds to 0.2107.
2. CH4 has the next smallest "a" value, so it corresponds to 2.253.
3. CO2 has a larger "a" value than CH4, so it corresponds to 3.392.
4. CH3CN has the largest "a" value, so it corresponds to 17.58.

Thus, the "a" value assigned to CH3CN should be 17.58.

Learn more about Vander Waals parameter here:

brainly.com/question/13201335

#SPJ11

The aqueous solution of the salt formed from the combination of a weak acid and a weak base is neutral. Option A is correct.

The salt obtained from the combination of a weak acid and a weak base can lead to a neutral, acidic, or basic solution depending on the relative strengths of the acid and base involved. In this case, the weak acid cyanic acid (HCNO) and the weak base ammonia (NH₃) react to form the salt ammonium cyanate (NH₄CNO), which can dissociate in water as follows:

NH₄CNO(s) + H₂O(l) → NH₄⁺(aq) + CNO⁻(aq)

Since ammonium ion (NH₄⁺) is the conjugate acid of the weak base ammonia and cyanate ion (CNO⁻) is the conjugate base of the weak acid cyanic acid, their tendency to either accept or donate protons (H⁺) will depend on their respective acid/base strengths.

In this case, because both the acid and base are weak, the salt will be a neutral salt, which means it will not affect the pH of the aqueous solution. Therefore, the aqueous solution of ammonium cyanate is expected to be neutral. In summary, the salt generated by combining a weak acid with a weak base is neutral in aqueous solution. Option A is correct.

To know more about the Aqueous solution, here

https://brainly.com/question/31312979

#SPJ4

Answer:

mol = 0.75

Explanation:

M = mol/L

1.5 = mol/.5

mol = 0.75

Answer:

Details on attachment.

Explanation:

See attached worksheet.

Answer: 16.7 KJ of heat

Explanation:

The heat required to melt the popsicle can be calculated using the equation:

q = nΔH

where q is the heat required, n is the number of moles of the substance being melted, and ΔH is the enthalpy of fusion.

To find the number of moles of the popsicle, we need to divide the mass by the molar mass:

n = m/M

where m is the mass of the popsicle and M is the molar mass. Since the popsicle has the same molar mass as water (18.0 g/mol), we have:

n = 50.0 g / 18.0 g/mol = 2.78 mol

The enthalpy of fusion of water is 6.01 kJ/mol, so we can calculate the heat required as:

q = nΔH = 2.78 mol x 6.01 kJ/mol = 16.7 kJ

Therefore, 16.7 kJ of heat are required to melt a 50.0-g popsicle at 0°C.

Mammoth Cave NP contains deposits of potassium nitrate (KNO3) that were used in the past to produce saltpeter, an important ingredient in gunpowder. These nitrate deposits were exploited extensively (and virtually exhausted) to support military action during the War of 1812.

Mammoth Cave NP contains deposits of potassium nitrate (KNO3) that were used in the past to produce saltpeter, an important ingredient in gunpowder. These nitrate deposits were exploited extensively (and virtually exhausted) to support military action during the War of 1812.The park is 211.26 square kilometers in size and has approximately 400 miles of surveyed caves. The longest cave system in the world is located here.

Mammoth Cave was established in 1941 as a national park. Since then, scientists have discovered that Mammoth Cave National Park's cave system is among the most biologically diverse in the world. Mammoth Cave National Park has been designated a UNESCO World Heritage Site and a Biosphere Reserve as well. So therefore these nitrate deposits were exploited extensively (and virtually exhausted) to support military action is during the War of 1812.

Learn more about Mammoth Cave at:

https://brainly.com/question/8763948

#SPJ11

The concentration of carbon monoxide is also [tex]x = 0.0371\ \mathrm{M}$.[/tex]The balanced chemical equation for the reaction is:

[tex]$\mathrm{CO_2 + 4H_2 \rightleftharpoons CH_4 + 2H_2O}$[/tex]

The equilibrium expression for the reaction is:

[tex]$K_c = \dfrac{[CH_4][H_2O]^2}{[CO_2][H_2]^4}$[/tex]

At equilibrium, let the concentration of CO2 be $x$,, the concentration of CH4 be $y$, and the concentration of H2 be $z$.

Initial concentrations:

[tex]$[CO_2] = 2.00\ \mathrm{mol}/5.00\ \mathrm{L} = 0.400\ \mathrm{M}$[/tex]

[tex]$[H_2] = 1.50\ \mathrm{mol}/5.00\ \mathrm{L} = 0.300\ \mathrm{M}$[/tex]

[tex][CH_4] = 0\ \mathrm{M}$ (initially)[/tex]

[tex][H_2O] = 0\ \mathrm{M}$ (initially)[/tex]

At equilibrium, we know that:

[tex]y = [CH_4] = 2x$[/tex]

[tex]2y = [H_2O]$[/tex]

[tex]z = [H_2] - 4y = 0.300 - 4(2x) = 0.300 - 8x$[/tex]

Substituting these expressions into the equilibrium expression and solving for $x$:

[tex]K_c = \dfrac{(2x)(2y)^2}{x(0.300 - 8x)^4} = 3.80$[/tex]

Solving this equation gives:

[tex]x = 0.0371\ \mathrm{M}$[/tex]

Therefore, the concentration of carbon monoxide is also [tex]x = 0.0371\ \mathrm{M}$.[/tex]

Learn more about carbon monoxide

https://brainly.com/question/22530423

#SPJ4

a. To determine the concentration of the unknown acid, you would need to perform a titration with a known concentration of a strong base like NaOH. Follow these steps:

1. Record the volume of the unknown acid solution used.

2. Record the initial and final burette readings of NaOH.

3. Calculate the volume of NaOH used in the titration.

4. Write a balanced equation for the reaction between the unknown acid and NaOH.

5. Use stoichiometry to find the moles of acid reacted.

6. Divide the moles of acid by the volume of the unknown acid solution used (in liters) to find the concentration.

b. To determine the Ka of the unknown acid, you will need additional information, such as the pH at the half-equivalence point (where half of the acid has been neutralized) or the pH and concentration of the acid after a certain amount of NaOH has been added. Then, you can use the following steps:

1. Write the balanced equation for the dissociation of the acid in water.

2. Use the given pH information to find the concentration of H+ ions.

3. Use the stoichiometry of the reaction to find the concentration of the other species in the equation.

4. Write the expression for Ka, which is [products]/[reactants].

5. Plug the concentrations into the Ka expression and solve for Ka.

c. When choosing an indicator for a titration, you should select one whose pH range (the range over which the indicator changes color) coincides with the pH of the equivalence point (where the acid is completely neutralized). You will need to determine the pH of the equivalence point, then choose an indicator that changes color within that pH range.

to know more about acid refer here:

https://brainly.com/question/11543614#

#SPJ11

A carbonyl group polar because b. oxygen is significantly more electronegative than carbon.

The carbonyl group is a functional group in organic chemistry consisting of a carbon atom double-bonded to an oxygen atom. C=O is the formula for a carbonyl group, this structure is present in many ketones and aldehydes, as well as carboxylic acids, esters, and amides. Oxygen is much more electronegative than carbon, and as a result, the electrons in the carbon-oxygen double bond are more strongly attracted to the oxygen atom. Because the electrons are attracted to the oxygen atom, the carbon-oxygen bond becomes polarized, with oxygen becoming negatively charged and carbon becoming positively charged.

The carbonyl group is an important functional group in biochemistry since it is found in a variety of biomolecules like carbohydrates, lipids, and nucleic acids. Because of its polarity, it can engage in hydrogen bonding with other functional groups in these molecules, such as hydroxyl groups. A carbonyl group polar because b. oxygen is significantly more electronegative than carbon.

Learn more about carbonyl group at:

https://brainly.com/question/13564853

#SPJ11

The percent yield of the reaction is 79.6%.

To calculate the percent yield of the reaction, we need to first calculate the theoretical yield of lead iodide based on the given amount of lead nitrate;

1 mol Pb(NO₃)₂ = 331.2 g

15.5 g Pb(NO₃)₂ = 15.5/331.2 mol Pb(NO₃)₂ = 0.0469 mol Pb(NO₃)₂

According to the balanced chemical equation, 1 mole of Pb(NO₃)₂reacts with 2 moles of KI to produce 1 mole of PbI2. Therefore,

0.0469 mol Pb(NO₃)₂ x (1 mol PbI2/1 mol Pb(NO₃)₂) = 0.0469 mol PbI₂ (theoretical yield)

The molar mass of PbI₂ is 461.0 g/mol, so the theoretical yield of PbI₂ in grams is;

0.0469 mol PbI₂ x 461.0 g/mol = 21.6 g PbI₂

Now we can calculate the percent yield:

% yield=(actual yield/theoretical yield) x 100

The actual yield is given as 17.2 g PbI₂, so

% yield = (17.2 g/21.6 g) x 100

= 79.6%

To know more about percent yield here

https://brainly.com/question/2506978

#SPJ4

--The given question is incomplete, the complete question is

"When 15.5g of lead nitrate reacts with 15.5g of potassium iodide, 17.2g of lead iodide is produced. What is the percent yield? Pb(NO₃)₂(aq) + 2KI(aq) → PbI₂(s) + 2KNO₃(aq)"--

Think about an unidentified substance with the formula c h i. it contains 54.53% C, 9.15% H, and 36.32% O. The empirical formula of the compound is C2H4O.

To find the empirical formula of a compound from the given percentage composition, we need to convert the percentages into the number of moles of each element. We can assume a convenient mass for the compound, such as 100 g, and use the molar masses of each element to convert the percentages into moles.

For this unknown compound, if we assume 100 g of the compound, we have:

Mass of C = 54.53 g

Mass of H = 9.15 g

Mass of O = 36.32 g

Using the molar masses of each element (12.01 g/mol for C, 1.01 g/mol for H, and 16.00 g/mol for O), we can convert these masses into moles:

Moles of C = 54.53 g / 12.01 g/mol = 4.54 mol

Moles of H = 9.15 g / 1.01 g/mol = 9.06 mol

Moles of O = 36.32 g / 16.00 g/mol = 2.27 mol

Next, we divide each of the mole values by the smallest mole value to get the smallest whole number ratio of the atoms:

C: 4.54 mol / 2.27 mol = 2

H: 9.06 mol / 2.27 mol = 4

O: 2.27 mol / 2.27 mol = 1

Therefore, the empirical formula of the compound is C2H4O.

To learn more about empirical formulas

https://brainly.com/question/14044066

#SPJ4

The balanced chemical equation for the neutralization reaction between sulfuric acid and potassium hydroxide is:

H2SO4(aq) + 2KOH(aq) → K2SO4(aq) + 2H2O(l)

From the equation, we can see that one mole of sulfuric acid reacts with two moles of potassium hydroxide. Therefore, we need to calculate the number of moles of potassium hydroxide present in the 30.0 mL of 0.260 M solution:

0.260 mol/L x 0.0300 L = 0.00780 mol KOH

Since the stoichiometric ratio of sulfuric acid to potassium hydroxide is 1:2, we need twice as many moles of sulfuric acid to neutralize the potassium hydroxide:

2 x 0.00780 mol = 0.0156 mol H2SO4

Finally, we can calculate the volume of the 0.235 M sulfuric acid solution required to provide 0.0156 moles of H2SO4:

0.0156 mol / 0.235 mol/L = 0.0664 L = 66.4 mL

Therefore, 66.4 mL of the 0.235 M sulfuric acid solution is required to neutralize 30.0 mL of 0.260 M potassium hydroxide.

To know more about potassium hydroxide, visit:

https://brainly.com/question/21904397

#SPJ1

The enthalpy of the reaction is -58.7928 kJ/mol of A. Note that the negative sign indicates that the reaction is exothermic (heat is released).

To calculate the enthalpy of the reaction (ΔH) in units of kJ/mole of A, we can use the following equation; ΔH = -q/n

where q is the heat absorbed or released by the reaction, and n is the number of moles of reactant A.

First, we need to calculate the heat absorbed or released by the reaction (q). We can use the following equation to calculate q:

q = m × c × ΔT + C_cal × ΔT

where m is the mass of the solution, c is the specific heat of the solution, ΔT is the change in temperature (T_final - T_initial), and C_cal is the heat capacity of the calorimeter.

The mass of the solution can be calculated using the density of the solution;

mass = volume × density = 36.512 mL × 1.000 g/mL = 36.512 g

Substituting the given values, we get;

q = 36.512 g × 4.186 J/g°C × (46.84°C - 25.0°C) + 15.558 J/°C × (46.84°C - 25.0°C)

= 6524.1 J

Next, we need to calculate the number of moles of reactant A

n = 0.111 moles

Now we can calculate the enthalpy of the reaction:

ΔH = -q/n = -(6524.1 J)/(0.111 moles) = -58792.8 J/mol

Finally, we convert the result to kJ/mol

ΔH = -58.7928 kJ/mol

To know more about enthalpy of the reaction here

https://brainly.com/question/1657608

#SPJ4

Answer:

Isabelle is taking a survey to find the most popular music group of students in her community. Which of these is not a way for her to get a representative sample of this information?

 ask every tenth student she sees ac a concert

 ask every fifth student entering her school in the morning

 ask every third student she encounters at the mall

 ask every student at a local movie theater

Explanation:

Thymol blue would be a good choice for this titration. As thymol blue has a pH range of 8 to 9.6, its color would change from yellow to green towards the end, making it the most obvious selection out of all of them.

If an indicator changes color at the end point, the end point has been reached and the indicator is being used to measure it. The conclusion of the titration is assumed to be at 8.74. Hence, the pH range of the indicator should be such that at 8.74, the color changes and is visible to the eye. As previously mentioned, a suitable indicator should have a pKin value that is quite near to the anticipated pH at the equivalence point. The choice of the indicator is not very important for a strong acid–strong base titration because of the significant pH shift that takes place at the equivalence point.

Learn more about titration here:

https://brainly.com/question/20732952

#SPJ4

Reproduced, transferred their genes to progeny, died from natural causes, fell ill or contracted a disease, became prey for a predator or were devoured by a scavenger, or moved to a new area.

Non-living things include items like rocks, water, the atmosphere, the climate, and natural occurrences like earthquakes and rockfalls. One of the qualities that characterises living beings is their capacity for reproduction.

Its definition includes glass, the sun, water, sand, and rock as non-living objects. They show absolutely no signs of life. Some people define a non-living object as anything that once belonged to a live entity.

To know more about scavenger visit:-

https://brainly.com/question/31224075

#SPJ1

The number of coulombs of charge transferred is 32220 C

When you perform an electrochemical reaction in which 0.800 mol of Cu are reduced to solid Cu, the number of coulombs of charge transferred can be calculated using Faraday's constant. The answer is 32220 C (coulombs).Explanation:

Given: The amount of Cu reduced to solid Cu = 0.800 mol

The amount of charge transferred can be calculated using Faraday's constant.

Faraday's constant = 96500 C mol^-1

Amount of charge transferred = n x FWhere,

n = Number of moles of electrons transferred.

F = Faraday's constant.Number of moles of electrons transferred

= 2 [Since the Cu ion gains 2 electrons to form Cu]Amount of charge transferred

= 2 x 96500 C mol^-1

= 193000 C [Or 1 F = 96500 C]Amount of charge transferred when 0.800 mol of Cu is reduced to solid Cu

= 193000 x 0.800 = 154400 C or 1.54 x 10^5 C (Approximately).

To learn more about : charge

https://brainly.com/question/18102056

#SPJ11