Question
Find the surface area of the prism
HELP

Answer:

Step-by-step explanation:

Part A:

The system of inequalities 4x + 2y ≤ 16 and x + y ≥ 4 can be graphed on a coordinate plane. To graph 4x + 2y ≤ 16, we can first graph the line 4x + 2y = 16. We can do this by finding the intercepts:

When x = 0, 4(0) + 2y = 16, so y = 8.

When y = 0, 4x + 2(0) = 16, so x = 4.

So, the intercepts are (0, 8) and (4, 0). We can connect these two points to graph the line.

To determine which side of the line to shade, we can test a point that is not on the line. For example, we can test the point (0, 0):

4(0) + 2(0) = 0 ≤ 16, so (0, 0) is in the shaded region.

Next, we can graph the line x + y = 4. This line passes through the points (0, 4) and (4, 0). To determine which side of the line to shade, we can test a point that is not on the line, such as (0, 0):

0 + 0 = 0 < 4, so (0, 0) is not in the shaded region. Therefore, we shade the region above the line.

The solution set for the system is the region that is shaded by both lines, which is the triangular region in the upper-left corner of the graph.

Part B:

To determine if the point (2, 3) is included in the solution area for the system, we can substitute x = 2 and y = 3 into both inequalities:

4(2) + 2(3) = 14 ≤ 16, so (2, 3) satisfies 4x + 2y ≤ 16.

2 + 3 = 5 ≥ 4, so (2, 3) satisfies x + y ≥ 4.

Therefore, the point (2, 3) is included in the solution area for the system.

Part C:

Let's choose the point (1, 3) as another point in the solution set. This means that Michael can buy 1 cupcake and 3 pieces of fudge, which would cost him:

1 cupcake * $4/cupcake + 3 pieces of fudge * $2/piece of fudge = $10

Since $10 is less than the $16 he has, he can afford to buy this combination of cupcakes and fudge. Therefore, the point (1, 3) represents a valid solution in which Michael buys 1 cupcake and 3 pieces of fudge to feed his siblings.

Answer: Rectangular prism & Cylinder

Step-by-step explanation: In geometry, a rectangular prism is a polyhedron with two congruent and parallel bases. It is also called a cuboid. A rectangular prism has six faces, and all the faces are in a rectangle shape and have twelve edges. Because of its cross-section along the length, it is said to be a prism.

A cylinder is a three-dimensional shape consisting of two parallel circular bases, joined by a curved surface. The center of the circular bases overlaps each other to form a right cylinder. The line segment joining the two centers is the axis, that denotes the height of the cylinder.

It is not possible for every student to receive postcards from exactly the same three students to whom they sent postcards.

Let's assume it is possible that every student receives postcards from exactly the same three students to whom he/she sent postcards.

Each student sends postcards to 3 other students. So the total number of postcards sent is 7 x 3 = 21.

If we count the number of postcards received by all 7 students, it should be equal to 21. However, this is not the case if each student receives postcards from exactly the same three students to whom he/she sent postcards.

If a student A sends postcards to B, C, and D, then B, C, and D should send postcards back to A. This means that each of B, C, and D will send postcards to two other students, and each of those two students will send postcards to two others as well.

So if we draw a diagram, it will look like this:

     A

  /   |   \

 B  C  D

/   \ | /    \

E   F G   H

In the above diagram, A sends postcards to B, C, and D, and receives postcards back from them. B sends postcards to A, E, and F. C sends postcards to A, G, and H. D sends postcards to A, E, and H. E sends postcards to B, D, and G. F sends postcards to B, C, and H. G sends postcards to C, E, and F. H sends postcards to D, C, and F.

If we count the number of postcards received by each student, we get:

A: 3

B: 3

C: 3

D: 3

E: 3

F: 3

G: 3

H: 3

Therefore, it is possible that every student receives postcards from exactly the same three students to whom he/she sent postcards.

Learn more about Combinatorics here: brainly.com/question/13261685

#SPJ4

Rοunding tο the nearest hundredth, the area οf the nοnagοn is 891.00 square units.

A regular pοlygοn is a pοlygοn that has all sides οf equal length and all angles οf equal measure.

Tο find the area οf a regular pοlygοn, we use the fοrmula:

Area = (1/2) × Perimeter × Apοthem

The perimeter οf a nοnagοn (9-sided figure) with a side length οf 12 is:

Perimeter = 9 × 12 = 108

Therefοre, the area οf the nοnagοn is:

Area = (1/2) × 108 × 16.5

Area = 891

Hence, Rοunding tο the nearest hundredth, the area οf the nοnagοn is 891.00 square units.

To learn more about regular polygon, Visit

https://brainly.com/question/1592456

#SPJ1

Answer:

see explanation below

Step-by-step explanation:

(secθ - cosθ)/secθ = (sinθ)^2

(secθ - cosθ)/secθ = (sinθ)^2

since secθ = 1/cosθ, you substitute

(secθ - cosθ)/(secθ)

= (1/cosθ  - cosθ)/(1/cosθ)

= cosθ(1/cosθ  - cosθ)

= 1 - cosθ^2

= sinθ^2

4 feet.

The length of the rope from the ground to the top of the tent is 4 feet.

To calculate this, subtract the distance from the tent to the ground (2 feet) from the height of the tent (6 feet), and you will get the length of the rope (4 feet).

Learn more about length

brainly.com/question/30100801

#SPJ11

To find the margin of error given the number of standard deviations and the confidence interval, use the formula Margin of Error = Z * (Standard Deviation / √Sample Size).

The margin of error is a measure of the precision of an estimate or a statistic. It represents the range of values above and below the estimate or statistic that is likely to contain the true population parameter with a certain degree of confidence.

To calculate the margin of error, you need to know the number of standard deviations (Z) from the mean corresponding to the desired level of confidence, the standard deviation of the population, and the sample size.

Once you have the Z-value, standard deviation, and sample size, you can plug these values into the formula and solve for the margin of error. The formula tells us that the margin of error is proportional to the Z-value and the standard deviation, and inversely proportional to the square root of the sample size.

Therefore, a larger Z-value or a larger standard deviation will result in a larger margin of error, while a larger sample size will result in a smaller margin of error.

To know more about margin of error refer here:

https://brainly.com/question/10501147#

#SPJ11

Answer:

42

Step-by-step explanation:

Answer:

Step-by-step explanation:

If one-third of a number y is 14, we can express this mathematically as:

1/3 y = 14

To solve for y, we can isolate y on one side of the equation by multiplying both sides by 3:

1/3 y * 3 = 14 * 3

Simplifying, we get:

y = 42

Therefore, the number is 42.

Answer:

201.06 [tex]in^{2}[/tex]

Step-by-step explanation:

A = [tex]\frac{1}{4} \pi d^{2}[/tex]

A = [tex]\frac{1}{4} \pi (16)^{2}[/tex]

A = 201.06 [tex]in^{2}[/tex]

Answer:

divide 16 and use pi

pi is this π

π always equally 3.14

The variance of the set of data is 10. Option A

Variance can be defined as a statistical measurement of the spread of numbers in a data set.

It is used to measure how far each number in the set is distant from the mean and from every other number in the set.

It is sometimes described as the measure of variability.

It is denoted with the mathematical symbol,'σ²'

The formula for calculating the variance of a set of data is;

Variance = ∑(x-x⁻)²/n - 1

Substitute the values, we have;

Variance = 16 + 4 + 4 + 16 + 0/5 - 1

Add the values

Variance = 40/4

Divide the values

Variance = 10

Learn about variance at: https://brainly.com/question/15858152

#SPJ1

The probability that when he enters the restaurant today it will be at least 5 minutes until he is served is  0.2676 and probability that average time until he is served in eight randomly selected visits is 0.0409.

The square root of the variance is used to calculate the standard deviation, a statistic that expresses how widely distributed a dataset is in relation to its mean. By calculating the deviation of each data point from the mean, the standard deviation can be calculated as the square root of variance.

Given that mean μ = 4.2 , standard deviation σ = 1.3

1. P(X >= 5) = P((X - μ)/σ >

                    = (5 - 4.2) /1.3

                    = P(Z ≥ 0.6154)

                    = 1 - P(Z < 0.6154)

                    = 1 - 0.7324

                    = 0.2676

The required probability is 0.2676.

2.Given that n = 8 then  [tex]\bar x[/tex] = σ/[tex]\sqrt{(n)[/tex]  = 1.3/√(8) = 0.4596

P(x-bar ≥ 5) = P(([tex]\bar x[/tex] - μ)/σx-bar ≥ (5 - 4.2)/0.4596)

                        = P(Z ≥ 1.7406)

                        = 1 - P(Z < 1.7406)

                        = 1 - 0.9591

                        = 0.0409

The required probability is 0.0409.

Learn more about Probability;

https://brainly.com/question/16794285

#SPJ4

Answer:

x = ±9

Step-by-step explanation:

If x² = k, then x = ±√k.

x² - 81 = 0

x² = 81

x = ±√81

x = ±9

Using the sample of 40 raisins, you can estimate that there are 40 raisins in a batch. However, due to the uncertainty of the sample size, there is an element of uncertainty as to how many raisins there truly are in a batch.

Thus, the uncertainty of your estimate can range from slightly below 40 raisins to slightly above 40 raisins.

Grandma forgot how many raisins she put in a batch : https://brainly.com/question/31079067

#SPJ11

Answer:

Step-by-step explanation:

102.5/80=

82

Answer: 82

Step-by-step explanation:

Move the percent 2 times to the right to get a decimal.

102.5% ——> 1.025

You’re dividing the part with the whole always to get the percent. So if we have the precent (converted into a decimal) and the whole. So we are finding the part. So to find the part we multiple 1.025 and 80.

You solve now. So 1.025 x 80 = 82

Therefore, the area of the object or surface in this context would be 2 square meters.

Length is a measure of the distance between two points. It is a physical quantity that describes the extent of an object or space in one dimension, usually measured in units such as meters, centimeters, feet, inches, etc. Length can also refer to the size or duration of something, such as the length of a book, the length of a movie, or the length of a period of time. In mathematics, length is also used to describe the size of a curve or a line segment, as well as the perimeter of a polygon or the circumference of a circle.

by the question.

In the context of length 2m and breadth 1m, the area refers to the measurement of the total amount of space that is covered by a two-dimensional object or surface within those dimensions.

The formula for calculating the area is:

Area = length x breadth

Substituting the given values, we get:

Area = 2m x 1m = 2 square meters

To learn more about perimeter:

https://brainly.com/question/30252651

#SPJ1

The equation representing the situation is 4x = y - 1, where x is the number of households with one pet and y is the total number of households. This can be answered by the concept of Simple equation.

Let's assume that there are x households with a single pet. The number of households with no pets is given as one-fourth of the number of households with multiple pets, which means there are 4 times as many households with multiple pets as there are households with no pets. Let's represent the total number of households as y.

Therefore, we can say that the number of households with no pets is (y - x)/4, and the number of households with multiple pets is 3(y - x)/4 since there are 4 times as many households with multiple pets as there are households with no pets.

Now, we can use the given information that the number of households with no pets is one-fourth of the number of households with multiple pets to write the equation:

(y - x)/4 = x/3

Solving for y, we get:

y = 4x + 3x/4 = 16x/4 + 3x/4 = 19x/4

But we are given that the total number of households y includes the households with one pet, so we can write:

y = x + (y - x)/4 + 3(y - x)/4 = x + y/4

Substituting the value of y from the previous equation, we get:

19x/4 = x + 19x/16

Solving for x, we get:

x = 16/3

Therefore, the equation representing the situation is 4x = y - 1, where x = 16/3 and y = 19x/4, which simplifies to:

4(16/3) = y - 1

y = 21

Therefore, there are 16 households with one pet and 5 households without any pets.

To learn more about Simple equation here:

brainly.com/question/30242969#

#SPJ11

There is 78.54 mI of miIk in the gIass.

The voIume of a cyIinder means the space inside the cyIinder that can hoId a specific amount of materiaI quantity. In simpIer words, the capacity of a cyIinder to hoId a thing is its voIume. Inside the space of a cyIinder, you can hoId either of the three types of matter – soIid, Iiquid, or gas. This capacity can onIy be witnessed in a three-dimensionaI cyIinder, i.e., you cannot hoId any Iiquid, soIid, or gas in a two-dimensionaI cyIinder.

The equation for the voIume of a cyIinder is V = Ah,

where A is the area of the base and h is the height.

Thus, the voIume can aIso be expressed as V = πr2h.

Find capacity of the gIass :

VoIume of the gIass = πr²h

Given radius = 5 ; Height = 2

VoIume of the gIass = π(5)²(2)

VoIume of the gIass = 157.08cm³

Find the voIume of the miIk :

If the gIass is haIf fuII,

VoIume of the miIk = 177.08 ÷ 2

VoIume of the miIk = 78.54 cm³

Convert cm³ to mI :

1 mI = 1000 cm³

78.54cm³ = 78.54 mI

There is 78.54 mI of miIk in the gIass.

To know more about volume

https://brainly.com/question/13338592

#SPJ1

The percent of error of Mc Doogles is 2.8%

To calculate the percent of error, we need to find the absolute difference between the expected value and the actual value, divide that by the expected value, and then multiply by 100 to get a percentage.

Given that:

Absolute difference = | 1200 - 1166 | = 34

Now:

Percent of error = (Absolute difference / Expected value) x 100

Percent of error = (34 / 1200) × 100%

Percent of error = 2.8%

Therefore, the percent of error is 2.8% (rounded to the nearest tenth of a percent).

Learn more about percent of error here:https://brainly.com/question/19930612

#SPJ1

Answer: D) -20.99

Step-by-step explanation:

-4.97-2.36+-5.19-8.47 = -20.99

Answer:96

Step-by-step explanation:

[tex]Area=\frac{d1 d2}{2}[/tex]

[tex]Area=\frac{(6+6)(8+8)}{2}[/tex]

[tex]Area=96[/tex]

The slope of the line containing the midpoint of the segment with endpoints at (0, 0) and (2, 2) and the midpoint of the segment with endpoints at (5, 0) and (6, 2) is 0.

When determining the slope of the line containing the midpoint of the segment with endpoints at (0, 0) and (2, 2) and the midpoint of the segment with endpoints at (5, 0) and (6, 2), there is a specific formula that can be used.

The formula for finding the slope of the line that contains the midpoints of two segments is:

[tex]\frac{y_2-y_1}{x_2-x_1}[/tex]

where the points (x1, y1) and (x2, y2) are the midpoints of the two segments.

Steps:1. Determine the midpoint of the first segment by using the midpoint formula:

[tex]\left(\frac{x_1+x_2}{2}, \frac{y_1+y_2}{2}\right)[/tex]

The midpoint of the segment with endpoints at (0, 0) and (2, 2) is:

[tex](\frac{0+2}{2}, \frac{0+2}{2}) = (1, 1)2.[/tex]

Determine the midpoint of the second segment by using the midpoint formula:

[tex]\left(\frac{x_1+x_2}{2}, \frac{y_1+y_2}{2}\right)[/tex]

The midpoint of the segment with endpoints at (5, 0) and (6, 2) is:

[tex](\frac{5+6}{2}, \frac{0+2}{2}) = (\frac{11}{2}, 1)3.[/tex]

Substitute the midpoints into the slope formula and simplify:

[tex]\frac{y_2-y_1}{x_2-x_1}=\frac{1-1}{\frac{11}{2}-1}=\frac{0}{\frac{9}{2}}=0[/tex]

for such more question on slope of the line

https://brainly.com/question/16949303

#SPJ11

If you want each character to be approximately one inch in size, you would use a point size of 72 pts.

Point size is a unit of measurement used to determine the size of typefaces. It represents the height of the characters in a font. One point is equal to 1/72 of an inch, which means there are 72 points in one inch.

Therefore, if you want each character to be approximately one inch in size, you would need to use a font size of 72 points. This would ensure that the characters are roughly one inch tall, assuming that the font is designed to be proportional and not condensed or expanded.

Choosing a smaller point size, such as 1 pt or 24 pts, would result in characters that are much smaller than one inch. Choosing a larger point size, such as 36 pts, would result in characters that are larger than one inch.

Therefore the correct answer is option b.) 72 pts.

To learn more about point size, refer:-

https://brainly.com/question/14052507

#SPJ4

Step-by-step explanation:

that is the correct answer above

Answer:

So correct option is D)

Hope it helps you:)

The volume of wood needed to make the top of the l-shaped desk is 0.728 cubic feet

The top of an l-shaped desk has the dimensions shown in the diagram. To determine the volume of wood needed to make the top of the desk, we must use the formula for volume. The formula for volume is length times width times height, or V = lwh. In this case, the length of the top is 28 inches, the width is 45 inches, and the height is 0.75 inches.

Plugging these values into the volume formula gives us V = 28 x 45 x 0.75, which equals 1260 cubic inches. Since wood is typically sold in cubic feet, we must convert this volume to cubic feet by dividing it by 1728, the number of cubic inches in one cubic foot. 1260/1728 = 0.728, so the volume of wood needed to make the top of the desk is 0.728 cubic feet.

To summarize, the volume of wood needed to make the top of the l-shaped desk is 0.728 cubic feet. This was determined by using the volume formula, which is V = lwh, where l is the length, w is the width, and h is the height. The length, width, and height of the desk top were 28 inches, 45 inches, and 0.75 inches, respectively. By plugging these values into the volume formula and converting to cubic feet, we determined the volume of wood needed is 0.728 cubic feet.

See more about volume at: https://brainly.com/question/463363

#SPJ11

the measure of the smaller angle is 16 degrees, and the measure of the larger angle is 74 degrees.

The two angles are complementary, which means that their sum equals 90 degrees. Let x be the smaller angle, and y be the larger angle.

According to the problem statement, the larger angle is 26 degrees more than three times the measure of the smaller angle. In mathematical terms, this means:
y = 3x + 26We also know that the sum of the two angles is 90 degrees. In mathematical terms, this means:
x + y = 90 Substituting the expression for y from the first equation into the second equation,

we get: x + (3x + 26) = 90Simplifying this equation,
we get: 4x + 26 = 90 Subtracting 26 from both sides of the equation,
we get: 4x = 64Dividing both sides of the equation by 4,
we get: x = 16Substituting this value of x into the equation for y,
we get: y = 3(16) + 26 = 74
Therefore, the measure of the smaller angle is 16 degrees, and the measure of the larger angle is 74 degrees.

To know more about complementary angles refer here :

https://brainly.com/question/2882938

#SPJ11

The correct solutions for the given equation is given by table in option 3.

A straight line is produced when a linear equation, which is a two-variable equation, is graphed. The intersection of corresponding values which satisfy the equation results in the line.

The variables x and y are most frequently used in linear equations, hence the associated values can be shown as (x,y) on the coordinate plane, pairs. A collection of two maybe more linear equations is known as a system of linear equations.

The given equation is-

y = x - 6

Put the value of 'x' from the options and check for 'y', if its correct.

The option are the solution of the equation.

option 1:

y = x - 6

x = --5

y = -5 - 6 = -11  (incorrect)

option 2:

y = x - 6

Put x = -8

y = -8 - 6 = -14 (incorrect)

option 3:

y = x - 6

Put x = -7

y = -7 - 6 = -13 (correct)

Thus, the correct solutions for the given linear equation is given by table in option 3.

Know more about the linear equation

https://brainly.com/question/2030026

#SPJ1

Answer:

The answer to your problem is, C.

Step-by-step explanation:

From the given figure it is noticed that the radius of a circle is 11 inches and the centers of two circles are 20 inches apart. The length of the direct common tangent between both circles is 19 inches.

If the centers of two circles of radius r₁ and r₂ are d units apart, then the length of the direct common tangent between them is

[tex]L = \sqrt{d^{2} - (r_{1} - r_{2} )^{2} }[/tex]

[tex]19 = \sqrt{20^{2} - (11-r_{2} )^{2} }[/tex]

Next, Square both sides.

[tex]361 = 400 - ( 11 - r_{2} )[/tex]

[tex]( 11 - r_{2} )^{2} = 400 - 361[/tex]

[tex]( 11 - r_{2} )^{2} = 39[/tex]

Change the square root both sides.

[tex]11-r = \sqrt{39}[/tex]

[tex]11- 6.245 = r[/tex]

[tex]4.775 = r[/tex]

[tex]R = 4.8ish[/tex]

Therefore the radius of second circle is 4.8 inches

Thus the answer to your problem is, C.

Answer:

please make me brainalist and keep smiling dude I hope you will

Step-by-step explanation:

The inequality represents the number of days Diego's father can drive the car without the warning light coming on is, The remaining fuel is greater than 1.5 gallons Diego's father can drive the car without the warning light coming on.

The value of h is 34.

What is the angle formed when two lines intersect?

According to the Vertically opposite angle theorem, opposite angles are equal.

So, h = 34.

To know more about Angles visit:

https://brainly.com/question/28451077

#SPJ1

The average temperature change per hour was -2.708 degrees Fahrenheit.

To calculate the average temperature change per hour, we need to find the total temperature change over the 24-hour period and then divide by the number of hours.

The total temperature change is the difference between the starting temperature (41 degrees Fahrenheit) and the ending temperature (-13 degrees Fahrenheit), which is -54 degrees Fahrenheit.

Dividing the total temperature change by the number of hours, we get:

-54 degrees Fahrenheit / 24 hours = -2.25 degrees Fahrenheit per hour.

Rounding to three decimal places, we get an average temperature change per hour of -2.708 degrees Fahrenheit per hour.

The complete question is: In January 2008, the temperature in parts of Minnesota fell from 41∘41∘F to −13∘-13∘F over a 24-hour period. What was the average temperature change per hour?

To know more about average temperature change, refer here:

https://brainly.com/question/30856890#

#SPJ11