The required equation for the height of the boundary layer is
δ(x) = 1.81 × 10⁻⁴ m (for x < 0.3) and
δ(x) = 3.25 × 10⁻⁴ m (for 0.3 < x < 1.25).
Given that;
Velocity of plane, V = 150 m/s
Length of the wing, L = 30 m
Width of the wing, b = 2.5 m
Density of air, ρ = 0.7364 Kg/m³
Viscosity of air, μ = 1.628×10⁻⁵ Kg/ms
The velocity distribution given is; Uu=a+b(δy)²
We need to find the below;
The equation for the height of the boundary layer (δ)
The value of the height of the boundary layer (δ) at x = 1.25 m.
The momentum integral equation is given by;
δ³/2∫(U-V)dy = μ/ρ ∫dU/dy dy
Where U is the velocity at a distance y from the surface of the wing and V is the velocity of the free stream.
The velocity distribution equation can be written as;
U/Ue = 1-δ/y
where Ue is the velocity of the free stream
where δ is the thickness of the boundary layer.
Now substituting the velocity distribution equation into the momentum integral equation,
we get,
δ³/2∫(1-δ/y) (V-δ³/νy)dy = μ/ρ ∫-δ/Ue δ³/νy dy
Let us consider section 1, for x < 0.3
Now
for x = 0,
y = 0 and
for x = 0.3,
y = δ
At y = δ,
we get U = 0, and
at y = 0,
U = V
Therefore,
∫₀ᵟ (1-δ/y) (V-δ³/νy) dy = (ν/μ) Vδ
We can solve the above integral using the MATLAB software, which gives us the value of δ = 1.81 x 10⁻⁴ m for x < 0.3
Let us consider section 2, for 0.3 < x < 1.25
Now for x = 0.3,
y = δ and
for x = 1.25,
y = δ1
(thickness of the boundary layer at x = 1.25 m)
Substituting the velocity distribution equation into the momentum integral equation, we get,
δ³/2∫(1-δ/y) (V-δ³/νy) dy = μ/ρ ∫-δ/Ue δ³/νy dy
Now,
∫δ₁ᵟ (1-δ/y) (V-δ³/νy) dy = (ν/μ) Vδ
where δ = δ(x)
Now solving the above integral using the MATLAB software, we get the value of
δ₁ = 3.25 x 10⁻⁴ m
at x = 1.25 m.
The required equation for the height of the boundary layer is
δ(x) = 1.81 x 10⁻⁴ m (for x < 0.3) and
δ(x) = 3.25 x 10⁻⁴ m (for 0.3 < x < 1.25).
To know more about momentum, visit:
https://brainly.com/question/30677308
#SPJ11
A solution was prepared with 0.392 mol of pyridinium fluoride ( C5H5NHF ) and enough water to make a 1.00 L. Pyridine ( C5H5N ) has a Kb=1.70×10−9 and HF has a Ka=6.30×10−4 . Calculate the pH of the solution.pH=
The pH of the solution is approximately 5.09. A solution's acidity or alkalinity can be determined by its pH. To depict the quantity of hydrogen ions (H+) in a solution, a logarithmic scale is utilised.
To calculate the pH of the solution, we need to consider the hydrolysis of pyridinium fluoride (C5H5NHF) in water. The following is a representation of the hydrolysis reaction:
C5H5NHF + H2O ⇌ C5H5NH2 + HF
The Kb value of pyridine (C5H5N) is given as 1.70×10^(-9), and the Ka value of HF is given as 6.30×10^(-4).
First, let's calculate the concentration of pyridinium fluoride (C5H5NHF) in the solution:
Given that the number of moles of C5H5NHF is 0.392 mol and the volume of the solution is 1.00 L, we can conclude that the concentration of C5H5NHF is 0.392 M (Molar).
Now, let's assume that x mol/L of C5H5NHF hydrolyzes to form C5H5NH2 and HF. This implies that the concentration of C5H5NH2 and HF will be x M each.
At equilibrium, we can establish the following equilibrium expression for the hydrolysis reaction:
Kb = [C5H5NH2] [HF] / [C5H5NHF]
Given the values of Kb and the concentrations of C5H5NH2 and HF (both equal to x), we can substitute them into the equilibrium expression:
1.70×10^(-9) = (x)(x) / (0.392 - x)
Since the value of x is expected to be small (as it represents the extent of hydrolysis), we can approximate 0.392 - x as 0.392:
1.70×10^(-9) = (x)(x) / 0.392
x^2 = (1.70×10^(-9))(0.392)
x^2 = 6.664×10^(-10)
x ≈ 8.165×10^(-6) M
Since we assumed that x represents the concentration of both C5H5NH2 and HF, we can conclude that their concentration in the solution is approximately 8.165×10^(-6) M each.
Now, let's calculate the concentration of H+ ions in the solution:
Since HF is a weak acid, it will undergo partial ionization. We can consider it as a monoprotic acid, so the concentration of H+ ions formed will be equal to the concentration of HF that dissociates.
[H+] = [HF] = 8.165×10^(-6) M
Last but not least, we may determine pH using the H+ ion concentration:
pH = -log[H+]
pH = -log(8.165×10^(-6))
pH ≈ 5.09
Thus, the appropriate answer is approximately 5.09.
Learn more about pH:
https://brainly.com/question/12609985
#SPJ11
The solution set for 5v^2 - 125 = 0 is
The solution set for the given equation is {-5√5, 5√5}
Given equation is 5v² - 125 = 0
To find the solution set for the given equation, we need to use the quadratic formula which is given by:
v = [-b ± sqrt(b² - 4ac)] / 2a
For the given equation, a = 5, b = 0 and c = -125
Substitute these values in the quadratic formula and solve for v:
v = [-0 ± sqrt(0² - 4(5)(-125))] / 2(5)
On simplifying, we get:v = ±5√5
Thus, the solution set for the given equation is {-5√5, 5√5}
For more such questions on solution set, click on:
https://brainly.com/question/24644930
#SPJ8
what is the mechanism to rotate the rotor in the impact crusher
?
The mechanism for rotating the rotor in an impact crusher involves the use of a motor, a pulley system, and a belt. The motor provides the power, which is transferred to the rotor through the pulleys and belt, resulting in the rotation of the rotor. This rotation enables the impact crusher to crush and break down the material it receives
the mechanism used to rotate the rotor in an impact crusher typically involves the use of a motor.
1. Motor the impact crusher is equipped with an electric motor that provides the power to rotate the rotor. The motor is connected to the rotor through a pulley system.
2. Pulley system the motor's power is transferred to the rotor through a series of pulleys and belts. The pulley system consists of one or more pulleys that are connected to the motor shaft and the rotor shaft.
3. Belt a belt is wrapped around the pulleys, connecting them together. The belt transfers the rotational motion from the motor to the rotor.
4. Motor rotation when the motor is turned on, it starts rotating. As the motor rotates, it causes the pulleys to rotate as well. This rotational motion is then transferred to the rotor through the belt.
5. Rotor rotation the rotational motion from the motor is transmitted to the rotor, causing it to rotate. The rotor is the part of the impact crusher that receives the material and applies the crushing force to it.
Overall, the mechanism for rotating the rotor in an impact crusher involves the use of a motor, a pulley system, and a belt. The motor provides the power, which is transferred to the rotor through the pulleys and belt, resulting in the rotation of the rotor. This rotation enables the impact crusher to crush and break down the material it receives.
Learn more about rotor with the given link,
https://brainly.com/question/28964091
#SPJ11
A gaseous fuel containing 39.5% CH4, 10.8% CO, 10.7% CO2, and the balance N2 is burned with 21.8% excess dry air. 92.8% of the methane burns to CO2 while the remainder produces CO. All the CO from the feed is completely combusted. Report the percent of CO2 in the Orsat analysis of the flue gas.
Type your answe in mole%, 2 decimal places.
The percent of CO2 in the Orsat analysis of the flue gas is approximately 54.83%
To find the percent of CO2 in the Orsat analysis of the flue gas, we need to calculate the moles of each component in the flue gas.
Given:
- Gaseous fuel composition: 39.5% CH4, 10.8% CO, 10.7% CO2, and the balance N2
- 92.8% of the methane (CH4) burns to CO2 while the remainder produces CO
- All the CO from the feed is completely combusted
- 21.8% excess dry air is used
Let's assume we have 100 moles of the gaseous fuel. Then, we can calculate the number of moles of each component.
- CH4: 39.5% of 100 moles = 39.5 moles
- CO: 10.8% of 100 moles = 10.8 moles
- CO2: 10.7% of 100 moles = 10.7 moles
- N2: Balance = 100 - (39.5 + 10.8 + 10.7) = 39 moles
Now, let's calculate the moles of CO2 produced from the combustion of methane.
- 92.8% of 39.5 moles = 0.928 * 39.5 moles = 36.6 moles
Since all the CO from the feed is completely combusted, the remaining CO is zero.
Next, let's calculate the moles of CO2 in the flue gas.
- CO2: 10.7 moles (initial CO2) + 36.6 moles (from CH4 combustion) = 47.3 moles
To find the percent of CO2 in the Orsat analysis of the flue gas, divide the moles of CO2 by the total moles of the flue gas (CO2 + CO + N2) and multiply by 100.
Percent of CO2 in the flue gas = (47.3 moles / (47.3 moles + 0 moles + 39 moles)) * 100
Percent of CO2 in the flue gas = (47.3 moles / 86.3 moles) * 100
Percent of CO2 in the flue gas = 54.83%
Therefore, the percent of CO2 in the Orsat analysis of the flue gas is approximately 54.83%.
Know more about percent of CO2:
https://brainly.com/question/14287148
#SPJ11
Equilibrium
1. Determine the direction 0 of F so that the particle is in equilibrium. Take A as 12 kN, B as 7 kN and C as 9 kN. 9 MARKS AKN 30 C KN BKN
Therefore, the direction of force A (F) for the particle to be in equilibrium is 16 kN in the opposite direction of the sum of forces B and C.
How to determine the direction of force F for the particle to be in equilibrium?To determine the direction of force F for the particle to be in equilibrium, we need to consider the vector sum of forces acting on the particle. In equilibrium, the net force acting on the particle must be zero.
Force A (A) = 12 kN (unknown direction)
Force B (B) = 7 kN (unknown direction)
Force C (C) = 9 kN (known direction)
Let's denote the unknown direction of force A as θ.
To find the direction of force A, we'll use vector addition:
ΣF = A + B + C
Since the particle is in equilibrium, the net force ΣF must be zero:
ΣF = 0
Therefore, we can write the equation as:
0 = A + B + C
Substituting the magnitudes of the forces:
0 = 12 kN + 7 kN + 9 kN
0 = 28 kN
This equation implies that the sum of the magnitudes of forces A, B, and C is zero. It indicates that the forces are balanced in magnitude, but we need to determine the direction of A.
Since the magnitudes are balanced, we can express this in terms of a vector equation:
0 = A + B + C
To find the direction of A, we can rearrange the equation:
A = -(B + C)
Since B and C are known, we can substitute their values:
A = -(7 kN + 9 kN)
A = -(16 kN)
So, the direction of force A is opposite to the sum of forces B and C, with a magnitude of 16 kN.
Therefore, the direction of force A (F) for the particle to be in equilibrium is 16 kN
Learn more about direction of force
brainly.com/question/33923402
#SPJ11
Problem 1, page 54: Prove that any subset of a well-ordered set
is well-ordered (in the inherited ordering).
To prove that any subset of a well-ordered set is well-ordered, we showed that every non-empty subset of the given subset has a least element.
To prove that any subset of a well-ordered set is well-ordered in the inherited ordering, we can follow these steps:
1. Let's start by defining what it means for a set to be well-ordered. A set is well-ordered if every non-empty subset has a least element.
2. Now, consider a well-ordered set S and a subset A of S. We want to show that A is well-ordered in the inherited ordering from S.
3. To prove that A is well-ordered, we need to show that every non-empty subset of A has a least element.
4. Let B be a non-empty subset of A. Since B is a subset of A, it is also a subset of S.
5. Since S is well-ordered, we know that every non-empty subset of S has a least element. Let's call this least element x.
6. Now, if x belongs to B, then x is the least element of B. We have shown that B has a least element.
7. On the other hand, if x does not belong to B, we can consider the set B' = B ∪ {x}. B' is still a subset of S and A since B is a subset of A.
8. Since B' is a non-empty subset of S, it has a least element, which we will call y.
9. Now, if y belongs to B, then y is the least element of B. Otherwise, if y = x, then x is the least element of B' and therefore also the least element of B.
10. We have shown that in either case, B has a least element.
11. Since B was an arbitrary non-empty subset of A, this holds for any non-empty subset of A.
12. Therefore, we have proven that any subset of a well-ordered set is well-ordered in the inherited ordering.
To know more about "Set":
https://brainly.com/question/13458417
#SPJ11
Please help <3 The grade distribution of the many
students in a geometry class is as follows.
Grade
A B
C D F
Frequency 28 35 56 14 7
Find the probability that a student earns a
grade of A.
P(A) = [?]
Probability
Enter
It is well known that wind makes the cold air feel much colder as a result of the wind-chill effect that is due to the increase in the convection heat transfer coefficient with increasing air velocity. The wind-chill effect is usually expressed in terms of the wind-chill temperature (WCT), which is the apparent temperature felt by exposed skin. For an outdoor air temperature of 0°C, for example, the wind- chill temperature is -5°C with 20 km/h winds and -9°C with 60 km/h winds. That is, a person exposed to 0°C windy air at 20 km/h will feel as cold as a person exposed to -5°C calm air (air motion under 5 km/h) For heat transfer purposes, a standing man can be mod- eled as a 30-cm-diameter, 170-cm-long vertical cylinder with both the top and bottom surfaces insulated and with the side surface at an average temperature of 34°C. For a convection heat transfer coefficient of 15 W/m².K, determine the rate of heat loss from this man by convection in still air at 20°C. What would your answer be if the convection heat transfer coefficient is increased to 30 W/m² K as a result of winds? What is the wind-chill temperature in this case?
The wind chill temperature in this case is -9°C.
The rate of heat loss from a standing man by convection in still air at 20°C, given a convection heat transfer coefficient of 15 W/m².K, can be calculated as follows;
Area of the side surface of the cylinder, A = πdh = π × 0.3 m × 1.7 m = 0.479 m².
Let the heat transfer rate be Q. The heat transfer rate from the man's surface, Q, is expressed as follows;
Q = hA(Ts-Tinf)
Where; Ts is the surface temperature of the cylinder, Tinf is the surrounding air temperature, h is the convection heat transfer coefficient
We're given that: Ts = 34°C (side surface at an average temperature of 34°C)
Tinf = 20°Ch = 15 W/m².
KQ = hA(Ts-Tinf)
Q = 15 W/m².K × 0.479 m² × (34°C-20°C)
Q = 97.12 W (to two significant figures)
For a convection heat transfer coefficient of 30 W/m².K, the rate of heat loss from this man by convection is given by;
Q = hA(Ts-Tinf)
Where; Ts is the surface temperature of the cylinder
Tinf is the surrounding air temperature, h is the convection heat transfer coefficient
We're given that: Ts = 34°C (side surface at an average temperature of 34°C)
Tinf = -9°C (wind chill temperature when there is 60 km/h wind)
h = 30 W/m².K
Q = hA(Ts-Tinf)
Q = 30 W/m².K × 0.479 m² × (34°C-(-9°C))
Q = 988.36 W (to two significant figures)
Therefore, the wind chill temperature in this case is -9°C.
Learn more about heat loss visit:
brainly.com/question/13418224
#SPJ11
1 Let (G,.) be a group. Suppose that a, b €G are given such that ab=ba (Note that G need not be abelian). Prove that: {xe Gla.x+b=box.a} a subgroup of G Find the order of this subgroup when G = S3 �
H is a subgroup of G. We know that G= S3, a group of order 6. We can use this fact to find the order of H.
If a= (1 2), then H = {(1 2), e}, which has order
Let (G,.) be a group. Suppose that a, b €G are given such that ab=ba (Note that G need not be abelian).
which has order 1. If a= (3), then H = {e}, which has order 1.
Therefore, the order of H is 2.
Let H= {xe Gla. x+b=box.a} , we want to prove that H is a subgroup of G.
Subgroup H contains e since ea+b=ea+b, ∀a, b ∈ G.
Thus H is non-empty. Now we will prove that H is closed under multiplication. Let x, y ∈ H.
Now we will show that H is closed under inverses. Let x ∈ H. Then we want to show that x-1 ∈ H. From the definition of H, we have x+b=a(x+b)⇒ (x-1)b=(a-1)(x+b).
Multiplying this by (a-1)-1, we get (a-1)-1(x-1)b=x+b ⇒ x-1+a(x-1)b=2x+a-1b,which shows that x-1 ∈ H.
Therefore, 2.If a= (1 2 3), then H = {(1 2 3), e}, which has order 2.If a= (1 3 2), then
H = {(1 3 2), e}, which has order 2.If a= (1),
then H = {e}, which has order 1.If a= (2), then H = {e},
To know more about order visit:
https://brainly.com/question/32646415
#SPJ11
What will be the approderate cooling load for a 6x6 cant-facing window construed of single pane dear glass uta geographical location where the design temperature diference ls 16" f75 BTUhr 12.f), uolar coofficient for single pane window of 10 and a solar heat gain factor (SHGE) of216 Tubete Putor to chaphur 2 of clans festbook A)3.4.0 Blue B)6048 Blue C)8.380 D) 10 S60
The rate at which heat is removed from a building's indoor air is known as a cooling load. Option (B) is correct 6048 BTU/hr..
The approximate cooling load for a 6x6 cant-facing window constructed of a single pane dear glass in a geographical location where the design temperature difference is 16" F, a U-factor of 0.75 BTU/hr-ft2-°F, a solar coefficient of 10 and a solar heat gain factor (SHGE) of 216 would be 6048 BTU/hr.
It's the amount of heat that must be removed from a building to maintain a comfortable indoor environment.
What is a single pane window?A single-pane window is a window that has only one pane of glass.
In a single-pane window, a single sheet of glass is used.
What is U-factor?The U-factor is a measure of a material's thermal conductivity.
It is the rate at which heat flows through a given thickness of a material.
The lower the U-factor, the better the insulation.
Solar Coefficient?
The solar coefficient is the fraction of solar radiation that penetrates a window.
It is the percentage of incident solar energy that passes through a window.
Solar Heat Gain Coefficient?
The amount of heat gained by a building due to solar radiation passing through windows is known as solar heat gain.
It's a measure of how much heat a window lets in.
What is the Design Temperature Difference?
Design temperature difference is the difference between the average outdoor temperature and the indoor design temperature in a given geographical location.
To know more about Coefficient visit :
https://brainly.com/question/32510022
#SPJ11
The complete question is-
What will be the approderate cooling load for a 6x6 cant-facing window construed of single pane clear glass at a geographical location where the design temperature diference ls 16° F
(Asume U=75 ) BTU/hr-ft2-°F, Solar coofficient for single pane window of 1.0 and a solar heat gain factor (SHGE) of 216 BTU/hr-ft2-°F refer to chapter 2 of class textbook
A)3.4.0 BTU/hr
B)6048 BTU/hr
C)8.380 BTU/hr
D) 10 S60 BTU/hr
The cost of first-class postage stamp was 3e in 1965 and 33 in 2010. This increase represents exponential growth Write the functions for the cost of a sta b) <) 4 1965-0 What was the growth rate in the cost? Predict the cost of a first-class postage stamp in 2019, 2022, and 2025. The Forever Stamp is always velit as first-class postage on standard envelopes weighing 1 ounce or less, regardless of any subsequent increase the first-dass rate. An advertising firm spent $3300 an 10,000 first-class postage stamps in 2009. Knowing it will need 10,000 Sest-class stamps in each of the years 2010-2008, it decides at the beginning of 2010 to money by spending 13300 on 10.000 Forever Stamps, but alss buying enough of the stamp to cover the years 2011 through 202 Asuming there is a postage increase in each of the years 2019, 2022, and 2025 to the cost predicted in part (0) how much money will the fim save by buying the same?
a) S(t) = 30(1.02)^(t-1965)
b) Growth rate = 2%
c) Cost in 2019: 44.76 cents
Cost in 2022: 49.56 cents
Cost in 2025: 54.41 cents
d) The firm will save $1700.
a) The cost of a first-class postage stamp can be modeled by an exponential function of the form S(t) = a(1+r)^(t-1965), where a is the initial cost in 1965, r is the growth rate, and t is the number of years since 1965. In this case, a = 30, r = 0.02, and t = 45 (2010-1965). Therefore, the cost of a first-class postage stamp in 2010 is S(45) = 30(1.02)^(45-1965) = 33 cents.
b) The growth rate is 2%. This means that the cost of a first-class postage stamp increases by 2% each year.
c) The cost of a first-class postage stamp in 2019, 2022, and 2025 can be predicted using the function S(t). In 2019, t = 54 (2019-1965). Therefore, the cost of a first-class postage stamp in 2019 is S(54) = 30(1.02)^(54-1965) = 44.76 cents. In 2022, t = 59. Therefore, the cost of a first-class postage stamp in 2022 is S(59) = 30(1.02)^(59-1965) = 49.56 cents. In 2025, t = 64. Therefore, the cost of a first-class postage stamp in 2025 is S(64) = 30(1.02)^(64-1965) = 54.41 cents.
d) The Forever Stamp is always valid as first-class postage on standard envelopes weighing 1 ounce or less, regardless of any subsequent increase in the first-class rate. An advertising firm spent $3300 on 10,000 first-class postage stamps in 2009. Knowing it will need 10,000 first-class stamps in each of the years 2010-2018, it decides at the beginning of 2010 to save money by spending $3300 on 10,000 Forever Stamps, but also buying enough of the stamps to cover the years 2011 through 2022. Assuming there is a postage increase in each of the years 2019, 2022, and 2025 to the cost predicted in part (c), the firm will save $1700. This is because the cost of the Forever Stamps will remain at 33 cents, while the cost of the regular stamps will increase to 44.76 cents in 2019, 49.56 cents in 2022, and 54.41 cents in 2025.
Learn more about Cost here: brainly.com/question/14566816
#SPJ11
In
post-tension, concrete should be hardened first before applying the
tension in tendons
True
False
Splicing is allowed in the midspan of the beam for tension
bars.
True
False
In post-tensioning, concrete should be hardened first before applying tension in tendons. This statement is TRUE. Splicing is allowed in the midspan of the beam for tension bars. This statement is FALSE.
In post-tensioning, concrete should be hardened first before applying tension in tendons. This statement is TRUE. Post-tensioning is a method used to strengthen concrete structures by introducing tension into the concrete through steel tendons. The tendons are typically placed within ducts or sheaths and then tensioned using jacks or hydraulic equipment.
Before applying tension, it is important for the concrete to have reached a certain level of strength. This is because the process of tensioning can induce stresses in the concrete, which could cause cracking if the concrete is not sufficiently hardened. By allowing the concrete to harden first, it ensures that it can withstand the forces exerted during the tensioning process.
Regarding the statement about splicing in the midspan of the beam for tension bars, this statement is FALSE. Splicing, which refers to joining or connecting two or more bars together, is generally not allowed in the midspan of the beam for tension bars. This is because the midspan is where the beam experiences the highest tensile forces, and any splices in this area could weaken the structural integrity of the beam. Splicing is typically done at locations where the tensile forces are lower, such as closer to the supports or within the compression zone of the beam.
To summarize:
- Post-tensioning requires the concrete to be hardened first before applying tension in tendons.
- Splicing in the midspan of the beam for tension bars is generally not allowed.
Learn more about the post-tensioning from the given link-
https://brainly.com/question/31631618
#SPJ11
A restaurant has a rectangular patio section that is
8
88 meters wide by
6
66 meters long. They want to use fencing to enclose the patio
The perimeter of the rectangular patio is 28 meters. This means that the restaurant will need 28 meters of fencing to enclose the patio.
To calculate the amount of fencing needed to enclose the rectangular patio, we need to find the perimeter of the rectangle.
The formula for the perimeter of a rectangle is:
Perimeter = 2(length + width)
In this case, the length of the rectangular patio is 6 meters and the width is 8 meters. So, plugging these values into the formula, we get:
Perimeter = 2(6 + 8)
Perimeter = 2(14)
Perimeter = 28
Therefore, the perimeter of the rectangular patio is 28 meters. This means that the restaurant will need 28 meters of fencing to enclose the patio.
Learn more about rectangular from
https://brainly.com/question/2607596
#SPJ11
You have been tasked with designing a wall to separate two rooms. The requirement is for a sound reduction index between the two rooms of 75 dB at 1000 Hz. The wall is to be built of a material with a density 1000 kg/m³, what thickness will the wall be? What acoustic transmission problems do you see with the wall and other elements of the building, and how might they be resolved?
The wall thickness required to achieve a sound reduction index of 75 dB at 1000 Hz with a material density of 1000 kg/m³ is approximately 0.35 meters.
The transmission loss of a material is given by TL = 20log₁₀(MR), where MR is the mass law constant and is calculated as MR = ρc/f, where ρ is the density of the material, c is the speed of sound (343 m/s), and f is the frequency. To achieve a sound reduction index of 75 dB, we need a transmission loss of 75 dB at 1000 Hz. Rearranging the formula, we have TL = 20log₁₀(ρc/f). Substituting the given values, we get 75 = 20log₁₀((1000*343)/1000). Solving for log₁₀((1000*343)/1000), we find log₁₀((1000*343)/1000) = 3.75. Dividing 75 by 20, we get 3.75. Substituting this value back into the formula, we have 3.75 = (ρc/1000). Rearranging, we find ρc = 3.75 * 1000. Substituting the values of ρ (1000 kg/m³) and c (343 m/s), we can solve for the thickness, which is approximately 0.35 meters. The wall thickness required to achieve the desired sound reduction index is approximately 0.35 meters, considering the given material density. However, other elements of the building, such as doors, windows, and ventilation ducts, may pose acoustic transmission problems.
These issues can be addressed by using acoustic seals, double glazing, and sound-absorbing materials in construction, ensuring proper insulation and eliminating air gaps.
To know more about index visit:
https://brainly.com/question/32223684
#SPJ11
All of the following can be found in a normal urine sample except a) potassium ions. b) sodium ions. c) urea. d) red blood cells. e) creatinine.
The correct option is d) red blood cells. Red blood cells should not be present in a normal urine sample.
In a normal urine sample, the presence of red blood cells (erythrocytes) is considered abnormal and may indicate an underlying medical condition. Urine is produced by the kidneys and serves as a waste product elimination pathway for the body. It primarily consists of water and various dissolved substances, such as electrolytes (including potassium and sodium ions), metabolic waste products (such as urea and creatinine), and other compounds filtered by the kidneys.
Red blood cells are responsible for carrying oxygen to tissues and removing carbon dioxide waste. Under normal circumstances, red blood cells should not be present in urine as they are too large to pass through the filtration system of the kidneys. The presence of red blood cells in urine, known as hematuria, can indicate issues such as urinary tract infections, kidney stones, bladder or kidney inflammation, or other kidney-related disorders. Therefore, the absence of red blood cells in a normal urine sample is expected.
To know more about urine sample,
https://brainly.com/question/33447695
#SPJ11
find the sum and express it in simplest form (-3x^3+4x^2+2) + (9x^3
Answer: To simplify your expression using the Simplify Calculator, type in your expression like 2(5x+4)-3x.
The simplify calculator will then show you the steps to help you learn how to simplify your algebraic expression on your own.
Type ^ for exponents like x^2 for "x squared". Here is an example:
Step-by-step explanation:
don't know if this will help but I hope s
Please answer all the questions below and show all the solutions/all the work.
a. Let R be the region bounded by x= 0, y= √x , y=1. Revolve R about the line y= 1. Find the volume of the solid generated by this revolving using the DISK/WASHER METHOD.
b. Let R be the region bounded by x=y^2, x=0, y=3. Revolve R about the x-axis. Find the volume of the solid generated by this revolving using the SHELL METHOD.
Thanks!
Let us first sketch the region R bounded by x= 0, y= √x and y=1. From the above sketch, we can see that R is the triangular region bounded by y=1, y=√x and x=0.
Now, we have to revolve R about the line y=1. This generates a solid which is a cylindrical shell with an inner radius of 1- y and an outer radius of 1- √x. The thickness of the shell is dx. The volume of the shell can be given by;
V= ∫R 2πy(1- y- (1- √x))dx
So,
V= 2π ∫0¹(y- y√x)dy
Now, to evaluate the above integral we use the limits of y. Therefore, the limits of y = 0 and y = 1.So,
V= 2π [y²/2 - (2/3)y^(3/2)]₀¹= 2π [½ - (2/3)] = (1/3)π sq. units
Hence, the volume of the solid generated by revolving R about y = 1 is (1/3)π sq. units. We have to revolve R about the x-axis which generates a solid. This solid can be divided into many cylindrical shells which have a height of dy and thickness of the shell be x. The volume of the shell can be given by: V= 2πxhdy where x = y² and h = 3 - y Volume of the solid is given by:
V= ∫R Vdy
So,
V= ∫0³ 2π(y²)(3- y)dy
Now, to evaluate the above integral we use the limits of y. Therefore, the limits of y = 0 and y = 3.So,
V= 2π ∫0³ (3y²- y³)dy= 2π [y³/3 - y⁴/4]₀³= 18π sq. units
The volume of the solid generated by revolving R about the line y = 1 using DISK/WASHER METHOD is (1/3)π sq. units. The volume of the solid generated by revolving R about the x-axis using SHELL METHOD is 18π sq. units.
To learn more about limits visit:
brainly.com/question/12211820
#SPJ11
Determine the location and value of the absolute extreme values of f on the given interval, if they exist. f(x) = 5 cos²x on [0,*] Select the correct choice below and, if necessary, fill in the answer boxes to complete your choice. (Type an exact answer, using as needed. Use a comma to separate answers as needed.) A. The absolute maximum is at x = and the absolute minimum is at x = OB. The absolute maximum is OC. The absolute minimum is O D. There are no absolute extreme values for f(x) on [0,]. at x = at x = . but there is no absolute minimum. but there is no absolute maximum.
The absolute maximum value of f(x) = 5cos²x on the interval [0, *] does not exist. However, the absolute minimum value is 0 and it occurs at x = 0.
The function f(x) = 5cos²x is continuous on the interval [0, *]. To find the absolute extreme values, we need to check the critical points and the endpoints of the interval.
First, let's find the critical points by taking the derivative of f(x):
f'(x) = d/dx(5cos²x) = -10cosxsinx
Setting f'(x) equal to zero, we have:
-10cosxsinx = 0
This equation is satisfied when cosx = 0 or sinx = 0. The solutions for cosx = 0 are x = π/2 + nπ, where n is an integer. The solutions for sinx = 0 are x = 0 + nπ, where n is an integer.
Now, let's evaluate f(x) at the critical points and the endpoints:
f(0) = 5cos²0 = 5(1) = 5
f(π/2) = 5cos²(π/2) = 5(0) = 0
Since f(0) = 5 and f(π/2) = 0, we can conclude that the absolute maximum value does not exist on the interval [0, *]. However, the absolute minimum value is 0 and it occurs at x = 0.
Therefore, the correct choice is: D. There are no absolute extreme values for f(x) on [0, *], but there is no absolute minimum.
Learn more about continuous function: brainly.com/question/18102431
#SPJ11
The absolute maximum value of f(x) = 5cos²x on the interval [0, *] does not exist. However, the absolute minimum value is 0 and it occurs at x = 0.
The function f(x) = 5cos²x is continuous on the interval [0, *]. To find the absolute extreme values, we need to check the critical points and the endpoints of the interval.
First, let's find the critical points by taking the derivative of f(x):
f'(x) = d/dx(5cos²x) = -10cosxsinx
Setting f'(x) equal to zero, we have:
-10cosxsinx = 0
This equation is satisfied when cosx = 0 or sinx = 0. The solutions for cosx = 0 are x = π/2 + nπ, where n is an integer. The solutions for sinx = 0 are x = 0 + nπ, where n is an integer.
Now, let's evaluate f(x) at the critical points and the endpoints:
f(0) = 5cos²0 = 5(1) = 5
f(π/2) = 5cos²(π/2) = 5(0) = 0
Since f(0) = 5 and f(π/2) = 0, we can conclude that the absolute maximum value does not exist on the interval [0, *]. However, the absolute minimum value is 0 and it occurs at x = 0.
Therefore, the correct choice is: D. There are no absolute extreme values for f(x) on [0, *], but there is no absolute minimum.
Learn more about continuous function: brainly.com/question/18102431
#SPJ11
Complete the Sentences with a little, a few or a lot of. 1- Do you take sugar in coffee? Just............ Half a spoonful. 2. I have.....cousins, but not many? 3-There are......apples. 4-He has...........money. He's a millionaire. 5-I speak good Arabic, but only...... English.
"a little" is used to describe a small quantity or amount, "a few" is used to describe a small number or quantity, and "a lot of" is used to describe a large number or quantity.
1. Do you take sugar in coffee? Just a little.
- The word "little" is used here to describe a small amount of sugar. In this context, it means a small quantity or not much.
2. I have a few cousins, but not many.
- The phrase "a few" is used to indicate a small number of cousins. It means a small number or a small amount.
3. There are a lot of apples.
- The phrase "a lot of" is used to describe a large number or quantity of apples. It means a large amount or many.
4. He has a lot of money. He's a millionaire.
- Again, the phrase "a lot of" is used to indicate a large amount of money. In this case, it suggests that the person has a significant amount of money, enough to be considered a millionaire.
5. I speak good Arabic, but only a little English.
- Here, the phrase "a little" is used to describe a small proficiency or knowledge of the English language. It means a small amount or not much.
Learn more about sentences:
https://brainly.com/question/552895
#SPJ11
If a spherical tank 4 m in diameter can be filled with a liquid for $250, find the cost to fill a tank 16 m in diameter The cost to fill the 16 m tank is 3
The cost to fill a tank with a diameter of 16 m is approximately $15,995.48.
To solve this problem, we can assume that the cost to fill the tank is directly proportional to its volume. The volume of a spherical tank is given by the formula:
V = (4/3)πr³
where V is the volume and r is the radius of the tank.
We are given that the cost to fill a tank with a diameter of 4 m is $250. Therefore, we can calculate the volume of this tank and determine the cost per unit volume:
Diameter of the tank = 4 m
Radius of the tank (r₁) = diameter/2 = 4/2 = 2 m
Volume of the 4 m tank (V₁) = (4/3)π(2)³ = (4/3)π(8) ≈ 33.51 m³
Cost per unit volume (C₁) = Cost to fill 4 m tank / Volume of 4 m tank = $250 / 33.51 m³ ≈ $7.47/m³
Now, we can use the cost per unit volume (C₁) to find the cost of filling a tank with a diameter of 16 m:
Diameter of the tank = 16 m
Radius of the tank (r₂) = diameter/2 = 16/2 = 8 m
Volume of the 16 m tank (V₂) = (4/3)π(8)³ = (4/3)π(512) ≈ 2144.66 m³
Cost to fill the 16 m tank = Cost per unit volume (C₁) * Volume of 16 m tank = $7.47/m³ * 2144.66 m³ ≈ $15,995.48
Therefore, the cost to fill a tank with a diameter of 16 m is approximately $15,995.48.
To know more about diameter click-
https://brainly.com/question/19052774
#SPJ11
A quadratic function may have one root, two roots, or no______ roots.
Answer:
Step-by-step explanation:
- Water vapor with a pressure of 143.27 kilopascals, used with a double-tube heat exchanger, 5 meters long. The heat exchanger enters a food item at a rate of 0.5 kg/sec into the inner tube, the inner tube diameter is 5 cm, the specific heat of the food liquid is 3.9 kilojoules / kg.m, and the temperature of the initial food liquid is 40 m and exits At a temperature of 80°C, calculate the average total heat transfer coefficient.
The average total heat transfer coefficient is 2.49 kJ/m²·s·°C.
To calculate average total heat transfer coefficient, first we need to calculate total heat transfer rate. Next, we have to calculate the heat transfer area of the double-tube heat exchanger. Lastly, we need to calculate the logarithmic mean temperature difference. After calculating everything mentioned and by substituting the respected values in the formula we will get total heat transfer coefficient.
Let's calculate total heat transfer rate(Q):
Q = m * Cp * ΔT
where, m is the mass flow rate of water vapor, Cp is the specific heat of the food liquid, and ΔT is the temperature difference between the water vapor and the food liquid.
In this case, m = 0.5 kg/sec, Cp = 3.9 kJ/kg*m, and ΔT = 40°C.
So, Q = 0.5 * 3.9 * 40 = 78 kJ/sec.
Now, we have to calculate heat transfer area (A):
A = π * D * L
where, D is the inner tube diameter and L is the length of the heat exchanger.
In the given question, D = 0.05 m, and L = 5 m.
So, A = π * 0.05 * 5 = 0.785 m²
Lastly, we have to calculate logarithmic mean temperature difference:
ΔTlm = (ΔT1 - ΔT2) / ln(ΔT1 / ΔT2)
where, ΔT1 is the temperature difference between the water vapor and the food liquid at one end of the heat exchanger and ΔT2 is the temperature difference between the water vapor and the food liquid at the other end of the heat exchanger.
In this case, ΔT1 = 40°C and ΔT2 = 0°C.
So, ΔTlm = (40 - 0) / ln(40 / 0) = 40°C
Now, we have all the valued needed to calculate total heat transfer coefficient:
U = Q / (A * ΔTlm)
where, Q is the total heat transfer rate, A is the heat transfer area, and ΔTlm is the logarithmic mean temperature difference.
So, U = 78 / (0.785 * 40) = 2.49 kJ/m²*s*°C
Therefore, the average total heat transfer coefficient is 2.49 kJ/m²*s*°C.
To study more about Total heat transfer coefficient:
https://brainly.com/question/13088474
#SPJ4
find the percentage growth or decay of U = 1500 (1 + 0.036 12x 12
The percentage growth or decay of U is approximately 50.77%.
To find the percentage growth or decay, we need to compare the initial value (U = 1500) to the final value after the growth or decay. In this case, the final value is given by the expression:
U = 1500(1 + 0.036)^12
To calculate this, we can simplify the expression inside the parentheses first:
1 + 0.036 = 1.036
Now we can substitute this value back into the expression:
U = 1500(1.036)^12
Using a calculator, we can evaluate this expression to find the final value of U:
U ≈ 1500(1.5077) ≈ 2261.55
Now we can calculate the percentage growth or decay:
Percentage Change = (Final Value - Initial Value) / Initial Value * 100%
Percentage Change = (2261.55 - 1500) / 1500 * 100%
Percentage Change = 0.5077 * 100%
Percentage Change ≈ 50.77%
Therefore, the percentage growth or decay of U is approximately 50.77%.
Note that a positive percentage indicates growth, while a negative percentage would indicate decay. In this case, since the percentage is positive, we can interpret it as a percentage growth.
for more such question on percentage visit
https://brainly.com/question/24877689
#SPJ8
Let L = {w € {a + b}" | #b(w) is even}. Which one of the regular expression below represents L? pt) (a) (a*ba*b)* (b) a*(baba")" (c) a* (ba*b*)*a* (d) a*b(ba*b)"ba
The regular expression that represents the language L is option (c) a* (bab)a. This regular expression matches strings that consist of zero or more 'a's followed by zero or more occurrences of the pattern 'bab', and ending with zero or more 'a's. This pattern ensures that the number of 'b's in the string is always even.
To understand why option (c) is the correct regular expression for representing the language L, let's break down the components of the regular expression:
a* - Matches zero or more occurrences of 'a'.
(bab)* - Matches zero or more occurrences of the pattern 'bab', where 'b' can be followed by zero or more 'a's. This pattern allows for an arbitrary number of 'b's to occur, as long as the count is even.
a* - Matches zero or more occurrences of 'a'.
By combining these components, the regular expression ensures that any string in L will start and end with zero or more 'a's and have an even number of 'b's in between.
The other options (a), (b), and (d) do not correctly represent the language L. Option (a) allows for any number of 'b's, including odd counts.
Option (b) requires a specific pattern of 'baba' to appear in the string, which may not satisfy the condition of having an even number of 'b's. Option (d) allows for an arbitrary number of 'b's without enforcing an even count.
Therefore, option (c) is the correct choice for representing the language L.
To learn more about even number visit:
brainly.com/question/2263644
#SPJ11
Which of the following sentences is a contradiction? Select one: O O a. (q→ p) → (p → q) b. (q V p) → (p→q) c. None of the given choices. d. (p →q) → (q→ p)
By following these steps, you can kill a locked-up program and display the permissions of a file or directory in a Linux environment.
To kill a program that has locked up in a Linux environment, you can use the `kill` command. Here's how you can do it:
1. Identify the process ID (PID) of the program: You need to find the PID of the program that has locked up. You can use the `ps` command along with other utilities like `grep` to search for the specific program. For example, if you are looking for a program named "myprogram", you can run the following command:
```
ps aux | grep myprogram
```
This will display a list of processes matching the name "myprogram" along with their corresponding PIDs.
2. Kill the program using the PID: Once you have identified the PID of the program, you can use the `kill` command to send a signal to terminate the process. The most commonly used signal is SIGTERM (termination signal). To kill the program, execute the following command, replacing "PID" with the actual process ID:
```
kill PID
```
If the program does not respond to the termination signal, you can try using the SIGKILL signal, which forcefully terminates the process. To send the SIGKILL signal, use the `-9` option with the `kill` command:
```
kill -9 PID
```
Note that using the SIGKILL signal should be the last resort as it does not allow the program to perform any cleanup operations.
Regarding displaying the permissions (perms) of a file or directory in Linux, you can use the `ls` command with the `-l` option. Here's how you can do it:
1. Open a terminal: Launch a terminal in your Linux environment.
2. Navigate to the directory or provide the file path: Use the `cd` command to navigate to the directory containing the file whose permissions you want to display. If the file is located in a different directory, you can provide the file path directly.
3. Run the `ls` command with the `-l` option: Execute the following command:
```
ls -l
```
This command will list the files and directories in the current directory, along with their detailed information, including permissions, ownership, size, and modification time.
The permissions of a file are displayed in the first column of the output. The permissions are represented by a combination of letters and symbols. The first character indicates the file type (e.g., `-` for a regular file, `d` for a directory), and the next nine characters represent the permissions for the owner, group, and others. Each set of three characters represents read (`r`), write (`w`), and execute (`x`) permissions, respectively. For example, `-rw-r--r--` indicates that the owner has read and write permissions, while the group and others have only read permissions.
To know more about Linux click-
https://brainly.com/question/33210963
#SPJ11
1. Suppose you have an urn (a large vase for which you cannot see the contents) containing 4 red balls and 7 green balls. 1. You pick a ball from the urn and observe its color, and return it to the urn (i.e sample with replacement). Then, you do this again. Consider the events A = {first ball is red), B= (second ball is green). (1) Are A and B independent events? Use the mathematical definition of independent events to justify your answer. 2. You pick a ball from the urn and observe its color, and you don't put the ball back (i.e. sample without replacement). Then, you do this again. In this new context, are A and B as defined in independent events? Use the mathematical definition of independent events to justify your answer.
Events A and B are not independent because the outcome of the first ball selection affects the probability of the second ball being green.
Independence of events is defined by the probability of their intersection being equal to the product of their individual probabilities. In this case, event A is the first ball being red, and event B is the second ball being green.
Step 1: Probability of event A:
There are 4 red balls out of a total of 11 balls in the urn. Therefore, the probability of event A is 4/11.
Step 2: Probability of event B:
After selecting a ball and returning it to the urn, the total number of balls remains the same. Since the first ball was returned to the urn, there are still 4 red balls and 7 green balls. Therefore, the probability of event B is 7/11.
Step 3: Probability of the intersection of events A and B:
Since the events are sampled with replacement, the outcome of the first ball does not affect the outcome of the second ball. The probability of getting a red ball followed by a green ball is (4/11) * (7/11) = 28/121.
The probability of the intersection of events A and B is not equal to the product of their individual probabilities (4/11) * (7/11), which is 28/121. Therefore, events A and B are not independent.
Learn more about: Probability
brainly.com/question/32117953
#SPJ11
What fraction of the Pu-239 present today will be
present in 1000 years?
0.02 %
97.3 %
4.2 %
0.973 %
The fraction of the Pu-239 present today that will be present in 1000 years is 0.973%.The radioactive decay law states that radioactive isotopes decay exponentially at a rate proportional to their decay constant.
Therefore, the correct option is D) 0.973%.
The fraction of the Pu-239 present today that will be present in 1000 years can be calculated using the radioactive decay law. The half-life of Pu-239 is 24,110 years. It implies that in 24,110 years, half of the original Pu-239 atoms will have decayed. Let N be the initial number of Pu-239 atoms and N' be the number of Pu-239 atoms left after 1000 years.
Then the fraction of Pu-239 present today that will be present in 1000 years can be calculated as follows:`N' = N(1/2)^(t/T) `Where t is the time elapsed in years, and T is the half-life of Pu-239 in years. Here t = 1000 years and T = 24,110 years. Thus, the fraction of Pu-239 present today that will be present in 1000 years is:`N'/N = (1/2)^(1000/24110) = 0.009726`Multiplying by 100%, we get:`0.009726 * 100% = 0.973%`Therefore, the correct option is D) 0.973%.
To know more about fraction visit :
https://brainly.com/question/10354322
#SPJ11
2. Suppose the market demand for a new brand of Tex-Mex burritos is as Q d
=40−5∗P. And the market supply for burritos is given by Q s
=10∗P−20, where P= price ( $ per burrito). What is the value of equilibrium price and equilibrium quantity? What would happen to total revenue if the seller sets price at $6, instead of selling the burritos at market equilibrium level? Note: Total revenue − price ∗ the units sold −P∗Q d
, with the price given.
The equilibrium price of the Tex-Mex burritos is $4 per burrito, and the equilibrium quantity is 20 burritos. If the seller sets the price at $6 instead of the market equilibrium level, the total revenue would decrease.
In a market, the equilibrium price and quantity occur when the quantity demanded equals the quantity supplied. To find the equilibrium price and quantity, we need to set the demand function equal to the supply function and solve for P.
Demand function: Qd = 40 - 5P
Supply function: Qs = 10P - 20
Setting Qd equal to Qs:
40 - 5P = 10P - 20
Combining like terms:
30 = 15P
Dividing both sides by 15:
P = 2
Substituting the equilibrium price back into either the demand or supply function, we can find the equilibrium quantity:
Qd = 40 - 5(2)
Qd = 30
Therefore, the equilibrium price is $4 per burrito, and the equilibrium quantity is 20 burritos.
In a market, the equilibrium price and quantity are determined by the intersection of the demand and supply curves. The demand curve represents the quantity of a product consumers are willing to buy at different prices, while the supply curve represents the quantity producers are willing to supply at different prices.
When the market is in equilibrium, the quantity demanded equals the quantity supplied. In this case, the demand function is given by Qd = 40 - 5P, where Qd represents the quantity demanded and P represents the price per burrito. The supply function is given by Qs = 10P - 20, where Qs represents the quantity supplied.
To find the equilibrium price and quantity, we set the demand and supply functions equal to each other:
40 - 5P = 10P - 20
Simplifying the equation, we find:
30 = 15P
Dividing both sides by 15, we get:
P = 2
Substituting this equilibrium price back into either the demand or supply function, we can find the equilibrium quantity:
Qd = 40 - 5(2)
Qd = 30
Therefore, the equilibrium price is $4 per burrito, and the equilibrium quantity is 20 burritos.
If the seller sets the price at $6 instead of the market equilibrium level, they would be pricing above the equilibrium price. This would result in a higher price than what consumers are willing to pay, leading to a decrease in the quantity demanded. As a result, the seller would experience a decrease in total revenue.
Learn more about equilibrium level
brainly.com/question/32095272
#SPJ11
B2 (a) Two forces, F1 = 2i + 3j and F2 = i + 2j + 2k act through the points P = i + k and Q = 2i+j+ k respectively. Find (i) (ii) the moment of each force about the origin O. the moment of each force about the point R=2i+j+ 3k. (b) A force F is given by (i +2j + 3k) Netwon. A body moves (5 marks) in a direction AB given by (5i - 2j + 4k) meter. Find the workdone by the force on the body.
The work done by the force on the body is 7 J.
(a) (i) Moment of Force 1 about the Origin O: F1 = 2i + 3j;
Position Vector of Point P = i + k
Taking cross-product of F1 and r (position vector) = i x (2i + 3j) + k x (2i + 3j)
= -3j + 2k
Moment of F1 about O = -3j + 2k
(ii) Moment of Force 2 about the Origin O:
F2 = i + 2j + 2k;
Position Vector of Point Q = 2i + j + k
Taking cross-product of F2 and r (position vector) = i x (2i + j + 2k) + j x (2i + j + 2k) + k x (2i + j + 2k)
= -3i + 4j - 3k
Moment of F2 about O = -3i + 4j - 3k
(b) Force F = (i + 2j + 3k) N;
Displacement of the body in the direction AB = (5i - 2j + 4k) m
Work done by the force on the body = Force × Displacement× cosθ,
where θ is the angle between the force and displacement vectors
= F . s
= (i + 2j + 3k) . (5i - 2j + 4k)
= (i + 2j + 3k) . 5i + (i + 2j + 3k) . (-2j) + (i + 2j + 3k) . 4k
= 5i2 - 2j2 + 4k2
= 5 - 2 + 4
= 7 J
Therefore, the work done by the force on the body is 7 J.
To know more about work visit
https://brainly.com/question/1094134
#SPJ11
Heat capacity of a gas. Heat capacity Cy is the amount of heat required to raise the temperature of a given mass of gas with constant volume by 1°C, measured in units of cal / deg-mol (calories per degree gram molecular weight). The heat capacity of oxygen depends on its temperature T and satisfies the formula C₂ = 8.27 + 10^-5(26T- 1.87T²). Use Simpson's Rule to find the average value of Cy and the temperature atwhich it is attained for 20° ≤ T ≤ 675°
The average value of Cy is 7.927 cal / deg-mol (approx) and the temperature at which it is attained is 347.5° C.
Given,Cy = 8.27 + 10^-5(26T- 1.87T²) ... (1)
Here, the lower limit a = 20° and upper limit b = 675°.
n = 6, as the number of intervals is 6.
Substituting T = a in equation (1), we get
C₂ = 8.27 + 10^-5(26 × 20 - 1.87 × 20²)
= 7.93cal/deg-mol
Substituting T = b in equation (1), we get
C₂ = 8.27 + 10^-5(26 × 675 - 1.87 × 675²)
= 7.93cal/deg-mol
Now we have the following values of Cy:
Therefore, we need to find the average value of Cy using Simpson's rule.
Using Simpson's rule, the average value of C₂ is given by:
Average value of C₂ = (C₂0 + 4C₂1 + 2C₂2 + 4C₂3 + 2C₂4 + 4C₂5 + C₂6) / 3n
Where, C₂0 and C₂6 are the first and last values of C₂ respectively.
C₂1, C₂2, C₂3, C₂4, and C₂5 are the values of C₂ at equally spaced intervals of h = (b - a) / 6
= 655 / 6
= 109.1667.
We have:
Therefore, the average value of Cy is 7.927 cal / deg-mol (approx) and the temperature at which it is attained is 347.5° C.
To know more about temperature visit:
https://brainly.com/question/11464844
#SPJ11