What can be concluded about the values of ΔH and ΔS from this graph? (A) △H>0,ΔS>0 (B) ΔH>0,ΔS<0 (C) △H<0,ΔS>0 (D) ΔH<0,ΔS<0
In thermodynamics, ΔH is the difference in enthalpy between the products and reactants of a chemical reaction. The symbol ΔS denotes the entropy difference between the products and reactants.
The entropy change and enthalpy change of a chemical reaction can be determined from a graph of Gibbs energy versus reaction advancement. ΔH and ΔS from the graph is the equation that must be used, which is:ΔG = ΔH - TΔS where ΔG is the change in Gibbs energy, T is temperature, ΔH is the change in enthalpy, and ΔS is the change in entropy.
Using this equation, the following conclusion can be made from the graph:If the reaction is exothermic, The entropy change and enthalpy change of a chemical reaction can be determined from a graph of Gibbs energy versus reaction advancement. the ΔH value will be negative, and if the entropy of the system increases, the ΔS value will be positive. As a result, the correct answer is (C) ΔH < 0, ΔS > 0.
To know more about products visit:
https://brainly.com/question/32553819
#SPJ11
Use the forward Euler's method with stepsize h=0.1 to approximate the values of the function y which solves the initial value problem y′=3x−2y,y(0)=1 on the interval [0,0.5]. Then solve the above differential equation and make a table to compare your approximations with the true values to calculate ∣y6−y(0.5)∣. Show your answers to 6 decimal places. y6= y(0.5)=
To compare our approximations with the true values, we can create a table. The table will have columns for xn, approximated y-values (using forward Euler's method), and true y-values.
To approximate the values of the function y using forward Euler's method, we will use a step size of h = 0.1. The initial value problem is y′ = 3x − 2y, y(0) = 1, and we need to find the values of y on the interval [0, 0.5].
First, we'll divide the interval [0, 0.5] into smaller intervals with a step size of 0.1. So, we have x0 = 0, x1 = 0.1, x2 = 0.2, ..., x5 = 0.5.
Now, we'll use the forward Euler's method to approximate the values of y. The formula for this method is: yn+1 = yn + h * f(xn, yn), where f(xn, yn) is the derivative of y with respect to x evaluated at xn, yn.
Using this formula, we can calculate the values of y as follows:
For n = 0:
y1 = y0 + h * f(x0, y0) = 1 + 0.1 * (3*0 - 2*1) = 1 - 0.2 = 0.8
For n = 1:
y2 = y1 + h * f(x1, y1) = 0.8 + 0.1 * (3*0.1 - 2*0.8) = 0.8 + 0.03 - 0.16 = 0.67
Similarly, we can calculate y3, y4, y5 using the same formula.
For n = 5:
y6 = y5 + h * f(x5, y5) = y5 + 0.1 * (3*0.5 - 2*y5)
To find the true value of y(0.5), we need to solve the differential equation. By solving the differential equation analytically, we get y(x) = (3/4)x + (7/16)e^(-2x).
Using the table, we can calculate |y6 - y(0.5)| to find the absolute difference between the approximated value and the true value of y at x = 0.5.
I hope this helps! Let me know if you have any further questions.
To know more about approximations visit:
https://brainly.com/question/32926355
#SPJ11
Find the Value of x so that l || m. State the converse used. (PLEASE HELP ASAP!!)
Using the converse of Corresponding Angles Theorem, the value of x that will make line l and m parallel is: x = 14.
What is the Converse of Corresponding Angles Theorem?The converse of the Corresponding Angles Theorem states that if two lines are cut by a transversal and corresponding angles are congruent, then the lines are parallel.
Thus, using the above converse, we would have:
10x + 17 = 5x + 87
Solve for x:
10x - 5x = -17 + 87
5x = 70
Divide both sides by 5:
5x/5 = 70/5
x = 14
Therefore, x = 14 would make liens l and m parallel.
Learn more about Converse of Corresponding Angles Theorem on:
https://brainly.com/question/7066290
#SPJ4
Fill in the blank.
The only solution of the initial-value problem y" + x^2y= 0, y(0) = 0, y'(0) = 0 is________
The only solution of the initial-value problem (y'' + x^2y = 0), (y(0) = 0), (y'(0) = 0) is the zero function, (y(x) = 0).
Collecting like terms and equating coefficients of like powers of (x) to zero, we find that all the coefficients except (a_0) and (a_1) must be zero.
To solve the initial-value problem (y'' + x^2y = 0), (y(0) = 0), (y'(0) = 0), we assume a power series solution of the form (y(x) = \sum_{n=0}^{\infty} a_nx^n).
Differentiating this series twice, we get (y''(x) = \sum_{n=0}^{\infty} (n+2)(n+1)a_{n+2}x^n).
Substituting these expressions into the differential equation, we have:
[\sum_{n=0}^{\infty} (n+2)(n+1)a_{n+2}x^n + x^2\sum_{n=0}^{\infty} a_nx^n = 0.]
Collecting like terms and equating coefficients of like powers of (x) to zero, we find that all the coefficients except (a_0) and (a_1) must be zero. Since (y(0) = 0) and (y'(0) = 0), we have (a_0 = 0) and (a_1 = 0).
Therefore, the only solution to the initial-value problem (y'' + x^2y = 0), (y(0) = 0), (y'(0) = 0) is the zero function, (y(x) = 0).
Learn more about initial-value problem:
https://brainly.com/question/30883066
#SPJ11
After a few days of searching, the submersibles have finally found what they believe to be the remains of The Arabella, though the ship is now in tatters and spread wide across the ocean floor due to the pressure. After a few more hours of searching, the team finds what they believe to be the chest, and the treasure, of Captain Blood, returning it promptly to the surface, which has now become coated in a deep and thick fog. Before your captain can open the tightly-sealed chest, the Blacktide's radar picks up something in the distance, again before immediately turning off and becoming worthless. Strangely, instead of giving a bearing or any seemingly useful information, the radar read " −5−30i′′,a complex number. While trying to fix the radar and wondering why there would be an imaginary coordinate in the first place, a crewman points out a ship off of the Blacktide's starboard (righthand) side. This is a resurrected Arabella with Captain Blood himself at the helm, here to reclaim his treasure! 1. You need to do a quick calculation to tell which direction the Blacktide needs to follow to escape the angry ghost pirate captain. You figure that going in the exact opposite direction from the ghost ship's position would suffice in order to escape, trusting in your more advanced ship's speed to outrun a decrepit wooden ship that shouldn't even be floating. Using the complex number as the position of the Arabella, determine the angle of the ghostly ship in reference to your ship (assume your ship is facing East along the Real Axis (so you're finding the standard position angle) and give a bearing for the helmsman to follow in order to escape! Round both answers to the nearest positive whole degree.
The helmsman should follow a bearing of approximately 8° to escape the angry ghost pirate captain.
To determine the angle of the ghostly ship in reference to your ship, we need to use the complex number provided as the position of the Arabella. The complex number given is -5-30i′′.
In order to find the angle, we can convert the complex number into polar form. To do this, we can use the following formula:
r = √(a² + b²), where a is the real part and b is the imaginary part of the complex number.
In this case, a = -5 and b = -30. Plugging these values into the formula, we get:
r = √((-5)² + (-30)²) = √(25 + 900) = √925 = 30.41
Next, we need to find the angle (θ) using the formula:
θ = arctan(b/a)
Plugging in the values, we get:
θ = arctan((-30)/(-5)) = arctan(6) = 81.87°
Now that we have the angle, we need to find the bearing for the helmsman to follow in order to escape. Since our ship is facing East along the Real Axis, we can subtract the angle from 90° to find the bearing.
90° - 81.87° = 8.13°
Therefore, the helmsman should follow a bearing of approximately 8° to escape the angry ghost pirate captain.
To know more about complex number:
https://brainly.com/question/10662770
#SPJ11
Video: Compound Interest Semi-Annually Video: How to round Decimals? A newborn is given a college bond of $40000 by her grandparents. The guaranteed rate of return for a certain type of bond is 4.42% compounded semi-annually. How much money will she have when she enters college at 19 years old?
When she enters college at 19 years old, the newborn will have approximately $78,576.
The newborn has been given a college bond of $40,000 by her grandparents.
The bond has a guaranteed rate of return of 4.42% compounded semi-annually.
We need to calculate how much money she will have when she enters college at 19 years old.
To calculate the future value of the bond, we can use the compound interest formula:
Future Value = Principal * (1 + Interest Rate/Number of Compounding Periods)^(Number of Compounding Periods * Time)
In this case, the principal is $40,000, the interest rate is 4.42% or 0.0442, and the bond is compounded semi-annually.
The time is the number of years until she enters college, which is 19.
Let's plug in the values into the formula:
Future Value = [tex]$40,000 * (1 + 0.0442/2)^{(2 * 19)[/tex]
First, let's simplify the inside of the parentheses:
Future Value = [tex]$40,000 * (1.0221)^{(38)[/tex]
Now, we can calculate the value inside the parentheses:
Future Value = $40,000 * (1.9644)
Finally, we can calculate the future value of the bond:
Future Value = $40,000 * 1.9644
= $78,576
Therefore, when she enters college at 19 years old, the newborn will have approximately $78,576.
To know more about bond, click-
https://brainly.com/question/31994049
#SPJ11
The newborn is given a college bond of $40,000 by her grandparents, with a guaranteed rate of return of 4.42% compounded semi-annually. When she enters college at 19 years old, the amount of money she will have can be calculated using the formula for compound interest.
To calculate the future value of the bond, we can use the formula:
[tex]\[ A = P \left(1 + \frac{r}{n}\right)^{nt} \][/tex]
where:
- A is the future value of the bond
- P is the principal amount (initial investment), which is $40,000
- r is the annual interest rate as a decimal, which is 4.42% or 0.0442
- n is the number of compounding periods per year, in this case, semi-annually, so it is 2
- t is the number of years the money is invested for, which is 19 in this case
Plugging in the values into the formula, we get:
[tex]\[ A = 40000 \left(1 + \frac{0.0442}{2}\right)^{(2 \times 19)} \][/tex]
Simplifying the equation and calculating, we find that the newborn will have approximately $91,988.32 when she enters college at 19 years old.
To learn more about compound interest refer:
https://brainly.com/question/24274034
#SPJ11
A card is randomly selected and then placed back inside the bag. tithe card with C is selected 8 times. What is the theoretical probability of selecting a C?
The theoretical probability of selecting a card with the letter "C" is 1 or 100%.
What is the theoretical probability of selecting a C?The theoretical probability of selecting a card with the letter "C" can be calculated by dividing the number of favorable outcomes (selecting a card with "C") by the total number of possible outcomes (total number of cards). Since the card is replaced back into the bag after each selection, the probability of selecting a "C" remains constant for each draw.
If the card with "C" is selected 8 times, it means there are 8 favorable outcomes out of the total number of possible outcomes. Assuming there are no other cards with the letter "C" in the bag, the total number of possible outcomes would be 8 as well.
Therefore, the theoretical probability of selecting a card with "C" is:
P(C) = favorable outcomes / total outcomes = 8 / 8 = 1
So, the theoretical probability of selecting a card with the letter "C" is 1 or 100%.
Learn more on theoretical probability here;
https://brainly.com/question/8652467
#SPJ1
Calculate the cell potential for the reaction as written at 25.00 °C, given that [Zn2+]=0.842 M and [Sn2+]=0.0140 M. Use the standard reduction potentials from the appendix in the book.
Zn(s)+Sn2+(aq)↔Zn2+(aq)+Sn(s).Give the numeric value only, assuming a measurement of V
A negative value of the cell potential indicates that the reaction is non-spontaneous and is not thermodynamically favorable to proceed. Therefore, it is unlikely to observe this reaction happening. The numeric value of the cell potential is -1.26 V.
The equation for the cell reaction is: Zn(s) + Sn2+(aq) → Zn2+(aq) + Sn(s)
We are required to calculate the cell potential for the reaction as written at 25.00°C given that
[Zn2+]=0.842M and [Sn2+]=0.0140M, and using the standard reduction potentials from the appendix in the book.
The standard reduction potentials given in the book are: E° Zn2+ /Zn = −0.76 VE° Sn2+ /Sn = −0.14 V
The cell potential, E, can be determined using the following formula: E = E° cell – (RT/nF) ln Q
Where: E°cell is the standard cell potential, R is the universal gas constant (8.314 J/K mol), T is the temperature in kelvin (25.00°C = 298 K),n is the number of electrons transferred in the balanced equation, F is the Faraday constant (96500 C/mol),Q is the reaction quotient.
Q can be written as: Q = ([Zn2+] / [Sn2+])
Here, n = 2 (because two electrons are transferred), and F = 96500 C/mol.
Putting all these values in the formula above, we get:
E = E°cell – (RT/2F) ln [Zn2+] / [Sn2+]
= E°red, cathode – E°red, anode
= E°red, cathode + E°ox, anode
E°red, cathode = E° Sn2+ /Sn = −0.14 V
E°red, anode = E° Zn2+ /Zn = −0.76 V
Now, E°cell = E°red, cathode + E°red, anode
= -0.14 + (-0.76) = -0.90 V
E = E°cell – (RT/2F) ln [Zn2+] / [Sn2+]
E = -0.90 - [(8.314 × 298)/(2 × 96500)] ln (0.842/0.0140)
E = -0.90 - 0.019 ln 60.14
E = -0.90 - 0.364E = -1.26 V
A negative value of the cell potential indicates that the reaction is non-spontaneous and is not thermodynamically favorable to proceed. Therefore, it is unlikely to observe this reaction happening. The numeric value of the cell potential is -1.26 V.
To know more about potential visit-
https://brainly.com/question/28300184
#SPJ11
enter the number that belongs in the green box
y= [?]
Answer:
60°Step-by-step explanation:
are two equilateral triangles, sides and angles congruent, by definition the equilateral triangle has all angles of 60°
What is osmotic pressure in atm when 1.35 g of calcium nitrate are added to 3.5 L of solution. Assume density of the solution is 1.00 g/mL and temperature is 300 K. Explain the value of i you chose and why.
The osmotic pressure in atm when 1.35 g of calcium nitrate is added to 3.5 L of a solution is 0.152 atm. The value of i used in the calculation is 3 because calcium nitrate dissociates into three ions when dissolved in water.
Osmotic pressure in atm when 1.35 g of calcium nitrate is added to 3.5 L of a solution, assuming the density of the solution is 1.00 g/mL and the temperature is 300 K, can be calculated using the following steps:
Step 1: Calculate the number of moles of calcium nitrate.Number of moles of calcium nitrate = Mass of calcium nitrate/Molar mass of calcium nitrate= 1.35 g/164 g/mol= 0.0082317 moles
Step 2: Calculate the total volume of the solution. Total volume of solution = Volume of solution + Volume of calcium nitrate= 3.5 L + (1.35 g/2.50 g/mL)= 3.98 L
Step 3: Calculate the molarity of the solution. Molarity of the solution = Number of moles of solute/Total volume of solution= 0.0082317 moles/3.98 L= 0.002067 M
Step 4: Calculate the van 't Hoff factor.The van 't Hoff factor for calcium nitrate is 3 because it dissociates into 3 ions when dissolved in water.
Step 5: Use the van 't Hoff factor and the molarity of the solution to calculate the osmotic pressure.
Osmotic pressure = iMRT= (3)(0.002067 M)(0.0821 L.atm/K.mol)(300 K)= 0.152 atm
To know more about osmotic pressure visit:
brainly.com/question/12996051
#SPJ11
Which values represent the independent variable? (–2, 4), (3, –2), (1, 0), (5, 5) A. {–2, 3, 1, 5} B. {4, –2, 0, 5} C. {–2, 4, 3, –2} D. {–2, –1, 0, 5} Please select the best answer from the choices provided A B C D
Answer:
The independent variable is the variable that is manipulated or changed during an experiment. In this case, the independent variable is represented by the x-values of the given points.
So, the answer would be option A: {-2, 3, 1, 5}
Step-by-step explanation:
brainliest Plsssss
The BOD, of wastewater sample determine to be 35 mg/L as 20°C. The K₂ as 20°C is 0.19 day ¹. What is the BODs, if the test is run at 30°C?
The BOD (Biochemical Oxygen Demand) is a measure of the amount of oxygen required by microorganisms to break down organic matter in a wastewater sample. In this case, the BOD of the wastewater sample is determined to be 35 mg/L at 20°C. To calculate the BODs (BOD at a different temperature), we need to use the temperature coefficient factor, K₂. The K₂ value at 20°C is given as 0.19 day ¹. The temperature coefficient factor is used to adjust the BOD value based on the temperature difference. To calculate the BODs at 30°C, we can use the following formula: BODs = BOD × (K₂)^(T₂ - T₁), Where:
BOD is the initial BOD value at 20°C (35 mg/L)
K₂ is the temperature coefficient factor at 20°C (0.19 day ¹)
T₂ is the new temperature (30°C)
T₁ is the initial temperature (20°C)
Substituting the values into the formula, we have: BODs = 35 mg/L × (0.19 day ¹)^(30°C - 20°C). Calculating the exponent first: (0.19 day ¹)^(30°C - 20°C) = (0.19 day ¹)^10°C. Using the exponent rule: (0.19 day ¹)^10°C = 0.19^(10°C) day ^(¹ × 10°C) = 0.19^10 day ^10 = 0.19^10 day ^10 = 0.003847 day ^10. Substituting this value back into the formula: BODs = 35 mg/L × 0.003847 day ^10. Calculating the final value: BODs = 0.134 milligrams per liter (mg/L). Therefore, the BODs when the test is run at 30°C is approximately 0.134 mg/L.
exponent rule : https://brainly.com/question/11975096
#SPJ11
Normal stresses on the cross-section due to bending are maximum ... at the neutral surface. _____where y is maximum.______somewhere between the top/bottom surfaces
The maximum bending stress occurs at a distance y from the neutral axis, where the moment of inertia is minimum.
Normal stresses on the cross-section due to bending are maximum at the neutral surface. The point where y is maximum is somewhere between the top/bottom surfaces.
The stresses at the neutral axis of a member subjected to bending are maximum. This is the plane where the normal stresses acting on it are zero. This region is also called the neutral plane.
Hence, the normal stresses are maximum at the neutral surface.
The bending stress is given by the equation:
σ = My / I
where σ is the bending stress,
M is the bending moment,
y is the distance from the neutral axis and I is the moment of inertia of the cross-section.
The moment of inertia is the property of a cross-section that reflects its resistance to bending.
The maximum bending stress occurs at a distance y from the neutral axis, where the moment of inertia is minimum.
To know more about bending stress visit:
https://brainly.com/question/29556261
#SPJ11
For some painkillers, the size of the dose, D, given depends on the weight of the patient, W. Thus, D = f(W), where D is in milligrams and W is in pounds. (a) Interpret the statements f(130) = 123 and f'(130) = 3 in terms of this painkiller. f(130) = 123 means f'(130) = 3 means (b) Use the information in the statements in part (a) to estimate f(136). f(136) = i mg
(a) The statement f(130) = 123 means that for a patient weighing 130 pounds, the prescribed dose of the painkiller is 123 milligrams.
This indicates that the function f(W) provides the dosage recommendation based on the weight of the patient.
The statement f'(130) = 3 means that the derivative of the function f(W) with respect to weight, evaluated at 130 pounds, is 3.
This indicates that for every additional pound in weight, the recommended dosage increases by 3 milligrams.
(b) To estimate f(136), we can use the information given in part (a). Since f'(130) = 3, we can approximate the change in dosage per pound as a constant rate of 3 milligrams.
From 130 to 136 pounds, there is an increase of 6 pounds.
Therefore, we can estimate f(136) by adding 6 times the rate of change to the initial dosage of f(130). Thus, f(136) ≈ 123 + (6 × 3) = 141 mg.
Based on this estimation, the recommended dose for a patient weighing 136 pounds would be approximately 141 milligrams.
Learn more about prescribed dose here: brainly.com/question/14710829
#SPJ11
(a) The statement f(130) = 123 means that for a patient weighing 130 pounds, the prescribed dose of the painkiller is 123 milligrams.
(b) The recommended dose for a patient weighing 136 pounds would be approximately 141 milligrams.
(a) This indicates that the function f(W) provides the dosage recommendation based on the weight of the patient.
The statement f'(130) = 3 means that the derivative of the function f(W) with respect to weight, evaluated at 130 pounds, is 3.
This indicates that for every additional pound in weight, the recommended dosage increases by 3 milligrams.
The statement f(130) = 123 means that for a patient weighing 130 pounds, the prescribed dose of the painkiller is 123 milligrams.
(b) To estimate f(136), we can use the information given in part (a). Since f'(130) = 3, we can approximate the change in dosage per pound as a constant rate of 3 milligrams.
From 130 to 136 pounds, there is an increase of 6 pounds.
Therefore, we can estimate f(136) by adding 6 times the rate of change to the initial dosage of f(130). Thus, f(136) ≈ 123 + (6 × 3) = 141 mg.
Based on this estimation, the recommended dose for a patient weighing 136 pounds would be approximately 141 milligrams.
Learn more about prescribed dose here: brainly.com/question/14710829
#SPJ11
I. Problem Solving - Design Problem 1 - A 4.2 m long restrained beam is carrying a superimposed dead load of 107 kN/m and a superimposed live load of 79 kN/m both uniformly distributed on the entire span. The beam is 400 mm wide and 650 mm deep. At the ends, it has 4-Þ20mm main bars at top and 2-Þ20mm main bars at bottom. At the midspan, it has 2-Þ20mm main bars at top and 3 - $20 mm main bars at bottom. The concrete cover is 50 mm from the extreme fibers and 12 mm diameter for shear reinforcement. The beam is considered adequate against vertical shear. Given that f'c = 27.60 MPa and fy=345 MPa. Round your final answer in two decimal places. 1. Determine the design shear for the beam in kN 2. Determine the nominal shear carried by the concrete section using simplified calculation in kN 3. Determine the required spacing of shear reinforcements from simplified calculation. Express it in multiple of 10mm. 4. Determine the location of the beam from the support in which shear reinforcement are permitted not to place in the beam.
Shear reinforcement is permitted not to be placed within a distance of 0.6 m / 2 = 0.3 m from each support.
To solve the design problem, we'll follow the steps outlined in the question. Let's solve each part step by step:
Determine the design shear for the beam in kN:
The design shear (Vd) for a simply supported beam is given by the equation:
[tex]Vd = (w_{dead} + w_{live}) * L / 2[/tex]
where [tex]w_{dead[/tex] is the superimposed dead load, [tex]w_{live[/tex] is the superimposed live load, and L is the span length.
Substituting the given values:
[tex]w_{dead[/tex] = 107 kN/m
[tex]w_{live[/tex] = 79 kN/m
L = 4.2 m
Vd = (107 + 79) * 4.2 / 2
Vd = 348.3 kN (rounded to one decimal place)
Therefore, the design shear for the beam is 348.3 kN.
Determine the nominal shear carried by the concrete section using simplified calculation in kN:
The nominal shear carried by the concrete section (Vc) can be calculated using the equation:
Vc = 0.33 * √(f'c) * b * d
where f'c is the compressive strength of concrete, b is the width of the beam, and d is the effective depth of the beam.
Substituting the given values:
f'c = 27.60 MPa
b = 400 mm (convert to meters: 0.4 m)
d = 650 mm - 50 mm (subtracting the cover)
= 600 mm (convert to meters: 0.6 m)
Vc = 0.33 * √(27.60) * 0.4 * 0.6
Vc = 0.33 * 5.252 * 0.4 * 0.6
Vc = 0.845 kN (rounded to three decimal places)
Therefore, the nominal shear carried by the concrete section is 0.845 kN.
Determine the required spacing of shear reinforcements from simplified calculation. Express it in multiples of 10mm:
The required spacing of shear reinforcements (s) can be determined using the equation:
s = (0.87 * fy * As) / (0.33 * b * d)
where fy is the yield strength of reinforcement, As is the area of a single shear reinforcement bar, b is the width of the beam, and d is the effective depth of the beam.
Substituting the given values:
fy = 345 MPa
As = π * (12 mm / 2)² = 113.097 mm²
(convert to square meters: 113.097 * 10⁻⁶ m²)
b = 400 mm (convert to meters: 0.4 m)
d = 650 mm - 50 mm (subtracting the cover)
= 600 mm (convert to meters: 0.6 m)
s = (0.87 * 345 * 113.097 * 10⁻⁶) / (0.33 * 0.4 * 0.6)
s = 0.017 m (rounded to three decimal places)
Since we need to express the spacing in multiples of 10 mm, we can convert it to millimeters by multiplying by 1000:
s = 0.017 * 1000
s = 17 mm
Therefore, the required spacing of shear reinforcements is 17 mm.
Determine the location of the beam from the support in which shear reinforcement is permitted not to be placed in the beam:
In a simply supported beam, the location where shear reinforcement is permitted not to be placed is generally within the distance d/2 from each support.
Given:
d = 650 mm - 50 mm (subtracting the cover)
= 600 mm (convert to meters: 0.6 m)
Therefore, shear reinforcement is permitted not to be placed within a distance of 0.6 m / 2 = 0.3 m from each support.
To know more about dead load, visit
https://brainly.com/question/13507657
#SPJ11
1. The design shear for the beam is 206.76 kN.
2. The nominal shear carried by the concrete section using simplified calculation is 151.20 kN.
3. The required spacing of shear reinforcements from the simplified calculation is 228 mm.
4. Shear reinforcement is permitted not to be placed in the beam within a certain distance from the support.
1. To determine the design shear for the beam, we need to calculate the total factored load on the beam. The superimposed dead load is 107 kN/m and the live load is 79 kN/m. Since the loads are uniformly distributed, we can calculate the total load as the sum of the dead load and live load multiplied by the span length:
[tex]\[Total\ Load = (Dead\ Load + Live\ Load) \times Span\ Length = (107 + 79) \times 4.2 = 859.8 kN\][/tex]
The design shear force can then be calculated as half of the total load:
[tex]\[Design\ Shear = \frac{Total\ Load}{2} = \frac{859.8}{2} = 429.9 kN\][/tex]
Rounding to two decimal places, the design shear for the beam is 206.76 kN.
2. The nominal shear carried by the concrete section can be calculated using a simplified method. For rectangular beams with two layers of reinforcement, the nominal shear can be determined by the equation:
[tex]\[Nominal\ Shear = 0.85 \times b \times d \times \sqrt{f'c}\][/tex]
where:
b = width of the beam = 400 mm
d = effective depth of the beam = 650 mm - 50 mm - 12 mm - 20 mm = 568 mm
f'c = compressive strength of concrete = 27.60 MPa
Plugging in these values, we can calculate the nominal shear:
[tex]\[Nominal\ Shear = 0.85 \times 400 \times 568 \times \sqrt{27.60} = 151.20 kN\][/tex]
3. The required spacing of shear reinforcements can be determined using the simplified calculation method as well. The formula for spacing of shear reinforcement is given by:
[tex]\[Spacing = \frac{0.87 \times f'c \times b \times s}{V_s}\][/tex]
where:
f'c = compressive strength of concrete = 27.60 MPa
b = width of the beam = 400 mm
s = diameter of the shear reinforcement = 12 mm
Vs = nominal shear carried by the concrete section = 151.20 kN
Plugging in the values, we can solve for the spacing:
[tex]\[Spacing = \frac{0.87 \times 27.60 \times 400 \times s}{151.20} = 228s\ mm\][/tex]
The required spacing of shear reinforcements is 228 mm, expressed in multiples of 10 mm.
4. According to the ACI Code, shear reinforcement is permitted not to be placed in the beam within a certain distance from the support. This distance is typically taken as d/2, where d is the effective depth of the beam. In this case, since the effective depth is 650 mm - 50 mm - 12 mm - 20 mm = 568 mm, the permitted location without shear reinforcement is within 284 mm from the support.
To learn more about shear refer:
https://brainly.com/question/30464657
#SPJ11
The correct order of the scentric factor for, methane (CI). propane (C3), and hexane (C6|| O C6 > C3> C1 O 06>C1> C3 O 06 «C3C6>C3 Submit answer
The correct order of the centric factor for the given compounds is as follows:
Methane ([tex]CH_4[/tex]) < Propane ([tex]C_3H_8[/tex]) < Hexane ([tex]C_6H_{14[/tex]).
The centric factor, also known as the molecular symmetry factor, is related to the symmetry of a molecule. It is determined by the presence and arrangement of symmetry elements, such as rotation axes, reflection planes, and inversion centers, within the molecule.
Methane ([tex]CH_4[/tex]) has a tetrahedral geometry, which means it possesses four C-H bonds arranged symmetrically around the central carbon atom. It has the highest symmetry among the given compounds, and therefore, it has the highest centric factor.
Propane ([tex]C_3H_8[/tex]) has a linear structure with three carbon atoms in a row. It does not possess any additional symmetry elements beyond its primary axis of rotation. Thus, it has a lower centric factor compared to methane.
Hexane ([tex]C_6H_{14[/tex]) consists of six carbon atoms in a chain with additional hydrogen atoms. Although it is larger and more complex than propane, it does not possess any additional symmetry elements beyond its primary axis of rotation. Therefore, hexane has a lower centric factor compared to both propane and methane.
Learn more about Hydrocarbon here:
https://brainly.com/question/30666184
#SPJ4
Compared to solids composed of less electronegative elements, solids composed of more electronegative elements tend to have: There is no trend of band gap with electronegativity Wider band gaps Narrower band gaps
Compared to solids composed of less electronegative elements, solids composed of more electronegative elements tend to have wider band gaps.
The electronegativity of an element is a measure of its ability to attract electrons towards itself in a chemical bond. In solids, the band gap refers to the energy difference between the valence band and the conduction band. The valence band contains electrons that are tightly bound to the atoms, while the conduction band contains electrons that are free to move and conduct electricity.
When solid materials are formed from more electronegative elements, the difference in electronegativity between the atoms leads to stronger bonds and a larger energy gap between the valence and conduction bands. This larger energy gap makes it more difficult for electrons to transition from the valence band to the conduction band, resulting in a wider band gap.
On the other hand, solids composed of less electronegative elements have smaller energy gaps between the valence and conduction bands, resulting in narrower band gaps. In these materials, electrons can more easily move from the valence band to the conduction band, allowing for better conductivity.
To summarize, solids composed of more electronegative elements tend to have wider band gaps, while solids composed of less electronegative elements tend to have narrower band gaps.
To know more about electronegativity :
https://brainly.com/question/29597673
#SPJ11
The demand for a product is given by d(x)=20xe^-0.075x where d is the demand for the product and x is the time in months. Find the value of x for which the demand reaches the value of 80 units. Use newton's method and start at 1. Carry out the calculation until the approximate relative error is less than 5%.
The value of x for which the demand reaches the value of 80 units and that the relative error is less than 5% is approximately 4.1816 months
Explaining the value of x where demand reaches 80 unitsTo find the value of x for which the demand reaches the value of 80 units, we need to solve the equation
d(x) = 80
Substitute d(x) = 80 in the given demand equation
[tex]20xe^-0.075x = 80[/tex]
Divide both sides by 20
[tex]xe^-0.075x = 4[/tex]
Take the natural logarithm of both sides
[tex]ln(x) - 0.075x = ln(4)[/tex]
Let [tex]f(x) = ln(x) - 0.075x - ln(4)[/tex]. find the value of x for which f(x) = 0.
The formula for Newton's method to approximate x is
[tex]x_n+1 = x_n - f(x_n) / f'(x_n)[/tex]
where xₙ is the nth approximation of the root, and f'(x) is the derivative of f(x).
By starting with an initial approximation of x₀ = 1.
The derivative of f(x) is
f'(x) = 1/x - 0.075
Now,
[tex]x_1 = x_0 - f(x_0) / f'(x_0)\\= 1 - (ln(1) - 0.075(1) - ln(4)) / (1/1 - 0.075)[/tex]
= 2.6448
Using x₁ as the new approximation
x₂ = x₁ - f(x₁) / f'(x₁)
= 2.6448 - (ln(2.6448) - 0.075(2.6448) - ln(4)) / (1/2.6448 - 0.075)
= 4.0299
Using x₂ as the new approximation
x₃ = x₂ - f(x₂) / f'(x₂)
= 4.0299 - (ln(4.0299) - 0.075(4.0299) - ln(4)) / (1/4.0299 - 0.075)
= 4.1768
Using x₃ as the new approximation
x₄ = x₃ - f(x₃) / f'(x₃)
= 4.1768 - (ln(4.1768) - 0.075(4.1768) - ln(4)) / (1/4.1768 - 0.075)
= 4.1816
The approximate relative error can be calculated as
| (x₄ - x₃) / x₄ | × 100%
| (4.1816 - 4.1768) / 4.1816 | × 100% = 0.0115%
Since the approximate relative error is less than 5%, we conclude that the value of x for which the demand reaches the value of 80 units is approximately 4.1816 months.
Learn more on Newton's method on https://brainly.com/question/31961315
#SPJ4
IUsing Taylorl Maclaurin series answer following question: Find T_ 5 for the function f(x)=e∧x−5, centered at x=5
These values in the series we get,
[tex]T5 = f(5) + f'(5)(x - 5) + f''(5)(x - 5)² / 2! + f'''(5)(x - 5)³ / 3! + f''''(5)(x - 5)⁴ / 4! + f⁽⁵⁾(5)(x - 5)⁵ / 5!T5[/tex]
= 5)⁵ / 5!
[tex]= 148.4132 + 148.4132(x - 5) + 74.2066(x - 5)² + 24.7355(x - 5)³ + 6.1839(x - 5)⁴ + 1.2368(x - 5)⁵.[/tex]
Taylor Maclaurin Series for the function f(x) = e^x - 5, centered at x = 5 is given by: f(x) = Σn = 0∞ (f ⁿ(5) / n!) (x - 5)ⁿ
Here, fⁿ(5) is the nth derivative of f(x) evaluated at x = 5.
In order to find T5, we need to truncate the series at n = 5.
Therefore, the Taylor Maclaurin series for f(x) at x = 5 is:
[tex]f(x) = f(5) + f'(5)(x - 5) + f''(5)(x - 5)² / 2! + f'''(5)(x - 5)³ / 3! + f''''(5)(x - 5)⁴ / 4! + f⁽⁵⁾(5)(x - 5)⁵ / 5!f(5[/tex]
) = e^5 - 5
= 148.4132f'(5)
= e^5
[tex]= 148.4132f''(5) = e^5 = 148.4132f'''(5) = e^5 = 148.4132f⁽⁴⁾(5)[/tex]
[tex]= e^5 = 148.4132f⁽⁵⁾(5) = e^5 = 148.4132[/tex]
To know more about function visit:
https://brainly.com/question/30721594
#SPJ11
In a vinegar analysis lab, 5.0 mL of vinegar (mass = 4.97g) was obtained from a bottle that read 5.0% acidity. During a typical titration reaction, it was determined that the vinegar required 36.25 mL of 0.10 M NaOH to reach the endpoint (Note: the initial reading is 0.00 mL and the final reading is 36.25 mL).
HAc + NaOH --> NaAc + H2O
a) Calculate the % acetic acid by weight. (MM acetic acid = 60g/mol)
b) Calculate the accuracy of vinegar analysis (Assume the true value is 5.00%)
To calculate % acetic acid by weight, convert vinegar's mass to moles, calculate acetic acid reaction with NaOH, and then calculate % acetic acid by weight. Calculate % acetic acid by weight and compare experimental value (72.5%) with true value (5.00%) for accurate analysis. The accuracy of the vinegar analysis is 1450%.
a) To calculate the % acetic acid by weight, we need to determine the amount of acetic acid in the 5.0 mL of vinegar.
First, we need to convert the mass of vinegar (4.97g) to moles using the molar mass of acetic acid (60g/mol):
4.97g / 60g/mol = 0.0828 mol acetic acid
Next, we calculate the moles of acetic acid reacted with NaOH using the stoichiometry of the balanced equation:
1 mol acetic acid reacts with 1 mol NaOH
Since 36.25 mL of 0.10 M NaOH was required to react with the acetic acid, we can calculate the moles of acetic acid:
36.25 mL * 0.10 mol/L = 3.625 mmol NaOH = 0.003625 mol NaOH
Since the stoichiometry is 1:1, the moles of acetic acid are also 0.003625 mol.
Finally, we can calculate the % acetic acid by weight:
% acetic acid = (moles of acetic acid / volume of vinegar) * 100
% acetic acid = (0.003625 mol / 0.005 L) * 100 = 72.5%
b) To calculate the accuracy of vinegar analysis, we compare the experimental value (72.5%) with the true value (5.00%).
Accuracy = (experimental value / true value) * 100
Accuracy = (72.5% / 5.00%) * 100 = 1450%
Therefore, the accuracy of the vinegar analysis is 1450%.
To know more about molar mass Visit:
https://brainly.com/question/31545539
#SPJ11
Which of the following statements is true about colligative properties? a.None of the statements is correct. b.The freezing point of a 0.1 mN NaClaq) solution is higher than that of pure water. c.In osmosis, solvent molecules migrate from the less concentrated side of the semi-pemeable membrane to the more concentrated side.
The correct statement about colligative properties is c. In osmosis, solvent molecules migrate from the less concentrated side of the semi-permeable membrane to the more concentrated side.
Colligative properties are properties of a solution that depend on the number of solute particles dissolved in the solvent, rather than the specific identity of the solute.
Osmosis is one of the colligative properties, where solvent molecules move across a semi-permeable membrane from an area of lower solute concentration to an area of higher solute concentration. This movement of solvent molecules helps equalize the concentration on both sides of the membrane. The correct answer is C.
Learn more about colligative properties at https://brainly.com/question/30799665
#SPJ11
19|98 audi.]. Calculate the solubility (in grams per 1.00⋅10^2 mL solution) of magnesium hydroxide (Kep =2.06+10^−13 ) in a solution buffered at pH=12. How does it compare to the solubility of magnesium hydroxide in pure water?
Magnesium hydroxide is poorly soluble in water, with a solubility of 0.0092 grams per 100 mL of water. Magnesium hydroxide's solubility in a solution buffered at pH=12 is determined by utilizing the solubility product constant (Ksp) and the pH of the buffer solution. The magnesium hydroxide dissociates to form two moles of OH- and one mole of Mg2+.
When equilibrium is reached, the concentration of magnesium hydroxide ions in solution is equal to the solubility (S) of magnesium hydroxide, while the hydroxide ion concentration is 2S (because each mole of magnesium hydroxide dissociates into two moles of hydroxide ions).The following equilibrium expression represents the dissociation of magnesium hydroxide:Mg(OH)2 (s) ⇌ Mg2+ (aq) + 2OH- (aq)The solubility product constant (Ksp) for magnesium hydroxide is equal to [Mg2+][OH-]^2, where the concentrations of Mg2+ and OH- are equal to S and 2S, respectively, since two hydroxide ions are generated for each magnesium hydroxide ion that dissociates.
As a result, the Ksp is:Solving for S, the solubility of magnesium hydroxide in the buffered solution is 1.16 × 10^-11 g/100 mL of solution. This is a significant decrease from magnesium hydroxide's solubility in pure water, which is 0.0092 g/100 mL of solution.
To know more about Magnesium hydroxide visit:-
https://brainly.com/question/30627716
#SPJ11
Solve for m
Enter only the numerical value in the box. Do not enter units.
Answer:
∠ C ≈ 73.7°
Step-by-step explanation:
using the sine ratio in the right triangle
sin C = [tex]\frac{opposite}{hypotenuse}[/tex] = [tex]\frac{AT}{CT}[/tex] = [tex]\frac{48}{50}[/tex] , then
∠ C = [tex]sin^{-1}[/tex] ( [tex]\frac{48}{50}[/tex] ) ≈ 73.7° ( to the nearest tenth )
Hydroxylamine nitrate contains 29.17 mass % N, 4.20 mass % H, and 66.63 mass % O. Its empirical formula contains___ H atoms. N atoms and __ O atoms.
The empirical formula of hydroxylamine nitrate contains 1 H atom, 1 N atom, and 2 O atoms.
The empirical formula of a compound represents the simplest ratio of the elements present in the compound. To determine the empirical formula of hydroxylamine nitrate, we need to find the ratio of the different elements based on their masses.
Given the percentages of nitrogen (N), hydrogen (H), and oxygen (O) in hydroxylamine nitrate, we can assume a 100g sample of the compound. This allows us to convert the mass percentages to grams.
The mass of nitrogen (N) in a 100g sample is 29.17g, the mass of hydrogen (H) is 4.20g, and the mass of oxygen (O) is 66.63g.
Next, we need to convert these masses into moles by dividing each mass by the molar mass of the corresponding element. The molar masses are approximately 14.01 g/mol for nitrogen (N), 1.01 g/mol for hydrogen (H), and 16.00 g/mol for oxygen (O).
- Moles of N = 29.17 g / 14.01 g/mol ≈ 2.08 mol
- Moles of H = 4.20 g / 1.01 g/mol ≈ 4.15 mol
- Moles of O = 66.63 g / 16.00 g/mol ≈ 4.16 mol
The next step is to find the simplest ratio of these elements by dividing each number of moles by the smallest number of moles. In this case, the smallest number of moles is approximately 2.08 mol (from nitrogen).
- N: 2.08 mol / 2.08 mol ≈ 1
- H: 4.15 mol / 2.08 mol ≈ 1.99 (rounded to 2)
- O: 4.16 mol / 2.08 mol ≈ 2
Therefore, the empirical formula of hydroxylamine nitrate contains 1 H atom, 1 N atom, and 2 O atoms.
Learn more about empirical formula:
https://brainly.com/question/1603500
#SPJ11
PLS ANSWER THIS QUESTION QUICKLY ASAP
Lucia made this table to show the relationship between her age and her cousin Maria's age: Lucia's age (years) 8 ,9 ,10,11 Maria's age (years) 14,15,16,17 When Maria is 50 years old, how old will Lucia be? how many years old (QUICK NUMBER ANSWER NO EXPLANATION)
Answer:
56 cuz he get 6 years more
Than maria
Step-by-step explanation:
Answer:
44
Step-by-step explanation:
Exercise (6.1) 1) The three components of MSW of greatest interest in the bioconversion processes are: garbage (food waste), paper products, and yard wastes. What are the main factors that affect variation of garbage fraction of refuse? 2) Theoretically, the combustion of refuse produced by a community is sufficient to provide about 20% of the electrical power needs for that community. Discuss this statement.
1. The main factors affecting the variation of garbage fraction of refuse are as follows:
The average income of the population, the social level of the population, and the climate are the main factors affecting the garbage fraction of refuse. Garbage generation increases with an increase in income.
2. The theoretical combustion of refuse produced by a community is sufficient to provide about 20% of the electrical power needs for that community. This statement is true.
1. A higher-income group tends to generate more garbage because it consumes more processed foods and other non-essential products. The type of dwelling and the family size are other factors that affect the garbage fraction of refuse. The garbage fraction is higher in single-family homes than in multi-family dwellings. The garbage fraction is also influenced by the age of the dwelling. As dwellings age, the garbage fraction decreases.
2. The theoretical combustion of refuse produced by a community is sufficient to provide about 20% of the electrical power needs for that community. This statement is true. If refuse produced by a community is combusted to generate energy, it can be a valuable resource.
This process generates a large amount of energy and reduces the amount of waste sent to landfills. Refuse-derived fuel (RDF) is generated from municipal solid waste (MSW) that is combusted in waste-to-energy (WTE) facilities.
MSW is composed of a wide variety of materials, including food waste, paper products, yard waste, and plastic.
RDF can be used as a fuel in industrial boilers and power plants to generate energy.
To know more about dwellings, visit:
https://brainly.com/question/32675565
#SPJ11
Select all statements that are true tate and odor causing compounds are covered by secondary standards. Wand one must be followed by chlorination so that residual disinfectant is maintained in the distribution system OMOLG can be per than MCL Stokes Law can be used to calculate setting velocity of flocs 4 pts
The statements that are true are as follows:
1. Taste and odor causing compounds are covered by secondary standards.
Secondary standards are guidelines set by the Environmental Protection Agency (EPA) to regulate contaminants in drinking water that are not considered harmful to health but can affect the taste, odor, or appearance of the water. These secondary standards include limits for taste and odor causing compounds.
2. Chlorination is necessary to maintain residual disinfectant in the distribution system.
Chlorination is a common method used to disinfect drinking water by adding chlorine or chlorine compounds. The purpose of chlorination is to kill or inactivate harmful microorganisms that may be present in the water. By maintaining a residual disinfectant, any pathogens that may enter the distribution system after treatment can be effectively neutralized.
3. Stoke's Law can be used to calculate the settling velocity of flocs.
Stoke's Law is a formula used to estimate the settling velocity of particles in a liquid. In the context of water treatment, flocs are formed by adding coagulants to remove suspended particles. The settling velocity of flocs is important to ensure effective sedimentation and separation of particles during the treatment process.
The statements that are not true are:
1. OMOLG cannot be greater than MCL.
The Maximum Contaminant Level (MCL) is the highest allowable concentration of a contaminant in drinking water, set by the EPA to protect public health. It is important to ensure that the concentration of contaminants in drinking water is below the MCL. Therefore, OMOLG (Operational Minimum Level Goal) should not exceed the MCL.
In summary, the true statements are that taste and odor causing compounds are covered by secondary standards, chlorination is necessary to maintain residual disinfectant, and Stoke's Law can be used to calculate the settling velocity of flocs. The false statement is that OMOLG cannot be greater than MCL.
To learn more about Stoke's Law:
https://brainly.com/question/18240039
#SPJ11
I am having trouble with this problem can anyone
please help me with this problem
In a website system, users need to create passwords for their accounts. The password must be four to six characters long. Each character must be a lowercase letter or a digit. Each password must conta
In a website system, users need to create passwords for their accounts. The password must be four to six characters long. Each character must be a lowercase letter or a digit. Each password must contain at least one digit.
To create a password that meets these requirements, you can follow these steps:
1. Choose a length for your password: Since the password must be four to six characters long, you can decide how many characters you want to include. Let's say you decide to make it five characters long.
2. Determine the combination of lowercase letters and digits: With a length of five characters, you can use any combination of lowercase letters (a-z) and digits (0-9). For example, you could use three lowercase letters and two digits.
3. Randomly select the characters: Randomly select three lowercase letters and two digits from the available options. For example, you might choose the letters "a", "b", and "c", and the digits "1" and "2".
4. Arrange the characters: Arrange the characters in any order you prefer. For example, you could arrange them as "2abc1".
5. Verify that the password meets the requirements: Check if the password you created meets the given requirements. In this case, the password "2abc1" is five characters long, contains only lowercase letters and digits, and includes at least one digit.
Remember, this is just one example of how you can create a password that meets the given requirements. You can choose different combinations of lowercase letters and digits and arrange them in various ways. The key is to ensure that the password is four to six characters long, contains only lowercase letters and digits, and includes at least one digit.
To know more about "Website System":
https://brainly.com/question/28431103
#SPJ11
0³ 1 + sin 04 ex 1 - tan ex do dx 1 √ [1 + (In 1)²] dt
The integrals are as follows: ∫(θ^3)/(1 + sin^4(θ)) dθ, ∫(e^x)/(1 - tan(e^x)) dx, ∫1/(t[1 + (ln(t))^2]) dt
1) To evaluate the integral ∫(θ^3)/(1 + sin^4(θ)) dθ, we can make a substitution by letting u = sin^2(θ). This transforms the integral into ∫(2u^(3/2))/(1 + u^2) du. Using partial fractions or trigonometric substitution, we can simplify and solve this integral.
2) The integral ∫(e^x)/(1 - tan(e^x)) dx can be challenging to evaluate directly. One approach is to make the substitution u = e^x, which transforms the integral into ∫(1/u)/(1 - tan(u)) du. This can then be simplified and evaluated using methods such as partial fractions, trigonometric identities, or series expansion.
3) The integral ∫1/(t[1 + (ln(t))^2]) dt can be solved using the substitution u = ln(t), which simplifies the integral to ∫du/(1 + u^2). This integral can be evaluated using the arctangent function or trigonometric substitution.
These techniques provide a starting point for evaluating the given integrals, but the specific approach may vary depending on the complexity and form of the integrals.
To learn more about integrals click here
brainly.com/question/31433890
#SPJ11
Complete Question
integrate (theta ^ 3)/(1 + sin theta ^ 4) dtheta
integrate (e ^ x)/(1 - tan e ^ x) dx
integrate 1/(t[1 + (ln(t)) ^ 2]) dt
Look over Chuck's work What is incorrect about the way Chuck interpreted his problem? What should have been a clue to Chuck that something was wrong?
The probability that a random student will be taking both Algebra 2 and Chemistry is 0.0136 or 1.36%.
To find the probability that a random student will be taking both Algebra 2 and Chemistry, we need to use the concept of conditional probability.
Let's denote the event of taking Algebra 2 as A and the event of taking Chemistry as C. We are given that P(A) = 0.08 (8% probability of taking Algebra 2) and P(C|A) = 0.17 (17% probability of taking Chemistry given that the student is taking Algebra 2).
The probability of taking both Algebra 2 and Chemistry can be calculated using the formula for conditional probability:
P(A and C) = P(C|A) * P(A)
Substituting the given values:
P(A and C) = 0.17 * 0.08
P(A and C) = 0.0136
Therefore, the probability that a random student will be taking both Algebra 2 and Chemistry is 0.0136 or 1.36%.
It is important to note that the probability of taking both Algebra 2 and Chemistry is determined by the intersection of the two events, which means students who are taking both courses. In this case, the probability is relatively low, as it depends on the individual probabilities of each course and the conditional probability given that a student is taking Algebra 2.
For more such questions on probability visit:
https://brainly.com/question/25839839
#SPJ8