The expression for the total amount of shoes for both people is 4X + 2.
What is another word for total cost?As a result, total cost is the sum of fixed and variable costs, or TC = FC + VC = Kr+Lw.
Say Person 1 owns X pairs of shoes. So, Person 2 has two to three times as much as Person 1. This can be said as follows:
Person 2 possesses at least two more than three times Person 1's amount, so Person 2's amount is equal to 3X + 2.
By simply adding Person 1's and Person 2's shoe counts, we can determine the total number of shoes for both individuals, which results in:
Total equals the sum of the amounts given by Persons 1 and 2.
When we replace the value of Person 2's contribution, we obtain:
Amount total = X + (3X + 2)
If we simplify, we get:
Total = 4X plus 2
Hence, 4X + 2 is the total number of shoes for both individuals.
To know more about Expression visit:
https://brainly.com/question/28170201
#SPJ1
If a item is $30 and the is 20% off the regular price how much would it be
Answer:
20 percent off depends on the original cost: Take the original number and divide it by 10. Double your new number. Subtract your doubled number from the original number. You have taken 20 percent off! For $30, you should have $24.
Step-by-step explanation:
each letter of the alphabet is written on a piece of paper and put in a hat. if a piece of paper is chosen at random, what is the probability that it will be a vowel? the number of favorable outcomes is . the number of possible outcomes is . so p(vowel)
The probability of selecting a vowel from a hat with letters of the alphabet is 5/26 or approximately 0.1923. There are 5 vowels and 26 total letters.
There are 5 vowels in the English alphabet: A, E, I, O, and U. Therefore, the number of favorable outcomes (i.e., the number of vowels in the hat) is 5.
There are a total of 26 letters in the English alphabet. Therefore, the number of possible outcomes (i.e., the number of letters in the hat) is 26.
The probability of selecting a vowel is the ratio of the number of favorable outcomes to the number of possible outcomes:
P(vowel) = number of favorable outcomes / number of possible outcomes
P(vowel) = 5 / 26
Therefore, the probability of selecting a vowel is 5/26 or approximately 0.1923 (rounded to four decimal places).
To know more about Probability:
https://brainly.com/question/11234923
#SPJ4
Answer:
5
26
5/26
19
Step-by-step explanation:
A town has a population of 12,000 and grows at 3. 5% every year. What will be the population after 7 years, to the nearest whole number?
If the population growth rate is 3.5 percent every year then the population of the town after 7 years would be 14940.
Given that population grows 3.5 percent every year.
So, the increase in population after one year
= 3.5% of 12000
= (3.5/100) × 12000
= 420
Thus the increase in population after 7 year would be,
= population increase in one year × 7
= 420×7 = 2940
Hence population of the town after 7 years = (present population + increase in population)
= 12000 + 2940
= 14940
So the population of the town after 7 years with 3.5 % growth every year would be 14490.
Visit here to learn more about the percent: https://brainly.com/question/28670903
#SPJ4
On a given planet, the weight of an object varies directly with the mass of the object. Suppose that an object whose mass is 5 kg weighs 25 N. Calculate the mass of another object that weighs 15 N
The weight of an object varies directly with the mass of the object therefore, the mass of the other object that weighs 15 N is 3 kg.
We can use the formula for direct variation, which states that if y varies directly with x, then y = kx, where k is the constant of variation. In this case, the weight y varies directly with the mass x, so we have:
y = kx
We are given that when x = 5 kg, y = 25 N. Substituting these values into the formula, we get:
25 = k(5)
Solving for k, we have:
k = 5
Now we can use this value of k to find the mass of another object that weighs 15 N. Let's call the mass of this object x2. We know that y2, the weight of the object, is 15 N. So we have:
15 = 5x2
Solving for x2, we have:
x2 = 3 kg
Therefore, the mass of the other object that weighs 15 N is 3 kg.
To learn more about mass Click here:
brainly.com/question/6199002
#SPJ4
3- if we know that a patient received the antidepressant (desipramine), what is the probability that they relapsed?
The probability that a patient will relapse after receiving desipramine depends on a variety of factors, such as dosage, duration of treatment, and pre-existing mental health conditions.
Generally speaking, it is estimated that around 50-70% of people who take desipramine as an antidepressant will experience relapse within six months of treatment cessation.
However, this rate can be decreased through longer treatment periods and/or higher doses of medication.
Additionally, patients may also benefit from lifestyle changes, such as increased physical activity, increased social engagement, and improved dietary habits.
Taking all of these factors into consideration, it is difficult to determine the exact probability of relapse in any given case.
To know more about antidepressant click on below link:
https://brainly.com/question/14307922#
#SPJ11
for each increase of one unit on the x-axis (the horizontal axis), the amount on the y-axis (the vertical axis) increases by:
For each increase of one unit on the x-axis (the horizontal axis), the amount on the y-axis (the vertical axis) increases by the slope of the line.
Slope is the amount of change in the y-axis that occurs as a result of a one-unit change in the x-axis. It is also known as the rise over run.
A positive slope indicates that the line rises from left to right, while a negative slope indicates that the line falls from left to right. If the slope is zero, the line is horizontal.
If the line slopes up from left to right, it has a positive slope. As the value of x increases by one, the value of y also increases by the slope. If the line slopes downward from left to right, it has a negative slope. As the value of x increases by one, the value of y decreases by the slope.The slope of a horizontal line is zero, and the slope of a vertical line is undefined because the x or y coordinate does not change as the other changes.
Therefore, the slope of a line represents the amount by which the value on the y-axis increases for every increase of one unit on the x-axis
To know more about slope refer here:
https://brainly.com/question/16152244
#SPJ11
Shiloh made a scale drawing of a triangular piece of art. Shiloh used a scale factor of 4 when making her drawing. If the base and the height of Shiloh's drawing are 7 inches and 2 inches respectively, what is the area of the piece of art?
The area of the piece of art is 448 square inches.
Shiloh made a scale drawing of a triangular piece of art.
Shiloh used a scale factor of 4 when making her drawing.
If the base and the height of Shiloh's drawing are 7 inches and 2 inches respectively,
what is the area of the piece of art?
Shiloh used a scale factor of 4 when making her drawing.
Therefore, the actual dimensions of the original triangular piece are four times the dimensions of the scaled drawing. Thus, the actual dimensions of the base and the height of the triangular piece are, respectively:
4 × 7 = 28 inches and 4 × 2 = 8 inches.
Using the formula for the area of a triangle,
we can find the area of the triangular piece.
The formula is given as A=12bh where b is the base and h is the height.
A = 12 × 28 × 8A = 112 × 4A = 448
Therefore, the area of the piece of art is 448 square inches.
For similar question on area.
https://brainly.com/question/25292087
#SPJ11
The sum of the deviation of the individual data elements from their mean is always_________.
a. equal to xero
b. equal to one
c. negative
d. positive
The sum of the deviations of the individual data elements from their mean is always equal to zero. Correct option is A.
This is because the deviation is defined as the difference between each data point and the mean of all the data points.
Since the mean is calculated as the sum of all the data points divided by the total number of data points, the positive deviations from the mean must be balanced out by the negative deviations from the mean. In other words, for every data point that is above the mean, there is a corresponding data point that is below the mean.
When we add up all the deviations from the mean, the positive deviations will cancel out the negative deviations, resulting in a sum of zero. This property of the sum of deviations from the mean is fundamental to many statistical concepts, such as variance and standard deviation.
Therefore, the correct answer to the question is (a) equal to zero, since the sum of the deviations from the mean is always zero.
To learn more about deviations click on,
https://brainly.com/question/30508904
#SPJ4
A plane ticket to Barcelona cost £175 the price decreases by 6% work out the new price of the plane ticket
Answer:
£164.50
Step-by-step explanation:
If the discount is 6%, then the discounted price is 94% of the original price.
95% of £175 = 0.94 × £175 = £164.50
10 ft
G
Find the area.
8 ft
Remember: A = r²
A = [?] ft²
Round to the nearest
hundredth.
Use 3.14 for T.
The area of the figure composing of a rectangle and a semi-circle is 105.12 ft².
What is the area of the composite figure?The figure in the image composes of a rectangle and a semi-circle.
The area of a rectangle is expressed as;
Area = Length × Width
The area of a semi-circle is expressed as;
Area = 1/2 × πr²
First, we find the area of the rectangle.
Area = Length × Width
Plug in Length = 10ft and Width = 8ft
Area = 10ft × 8ft
Area = 80ft²
Next, find the area of the semi-circle.
Area = 1/2 × πr²
Since diameter = 8ft, radius r = diameter/2 = 8ft/2 = 4ft
Area = 1/2 × 3.14 × (4ft)²
Area = 1/2 × 3.14 × 16 ft²
Area = 25.12 ft²
Now, area of the composite figure will be:
Area of the rectangle + Area of the semi-circle.
Area = 80ft² + 25.12 ft²
Area = 105.12 ft²
Therefore, the area of the figure is 105.12 ft².
Learn more about area of rectangle here: https://brainly.com/question/27612962
#SPJ1
a baseball parkamount of soft drink dispensed is normally distributed with standard deviation 2.0 ounces. how many travel mugs should be included in a study if it is desiredthat the sample mean soft drink dispensed be within 0.5 ounces of the
If we randomly select 62 travel mugs and measure the amount of soft drink dispensed in each mug, the sample mean will be within 0.5 ounces of the population mean with 95% confidence.
To determine the number of travel mugs required for the study, we need to use the formula for sample size determination for means. The formula is:
n = (Z^2 * σ^2) / E^2
Where:
n = sample size
Z = Z-score for the desired confidence level (e.g., 1.96 for 95% confidence level)
σ = standard deviation of the population
E = desired margin of error (i.e., the maximum difference between the sample mean and the population mean)
In this case, we are given that the standard deviation of the soft drink dispensed is 2.0 ounces and we want the sample mean to be within 0.5 ounces of the population mean. Let's assume a 95% confidence level, which corresponds to a Z-score of 1.96. Plugging in the values, we get:
n = (1.96^2 * 2^2) / 0.5^2 = 61.6
We need to round up to the nearest whole number, so the final sample size should be 62 travel mugs. The larger the sample size, the smaller the margin of error will be, but it also means more time and resources required for the study.
To learn more about distribution click on,
https://brainly.com/question/13017311
#SPJ4
Complete question is:
a baseball parkamount of soft drink dispensed is normally distributed with standard deviation 2.0 ounces. how many travel mugs should be included in a study if it is desiredthat the sample mean soft drink dispensed be within 0.5 ounces of the population mean with 95% confidence.
which of the following is true of a meta-analysis? in a meta-analysis, there is an manipulation of variables. in a meta-analysis, random assignment is required. in a meta-analysis, only a certain amount of studies can be used. in a meta-analysis, we can look for gaps in the research, based on a statistical analysis.
In the following question, among the given options, The statement "In a meta-analysis, there is a manipulation of variables" is false. hence meaning that the rest of them are stated to be true.
In A meta-analysis is a statistical technique for synthesizing the findings of multiple studies. It involves combining the results from multiple studies, analyzing them, and presenting a summary of the overall evidence. It does not involve manipulating variables or performing a random assignment. In a meta-analysis, any amount of studies can be used, and researchers can look for gaps in the research, based on a statistical analysis.
For more such questions on meta-analysis
https://brainly.com/question/14723190
#SPJ11
HELP PLEASE ¨"half-life problem¨¨ A certain computer loses half of its value every four years. If the value of the computer after 6 years is $835, what was the initial value of the computer?
Thus, the computer was initially worth $3340 as the PC will be worth $835 after six years.
what is unitary method ?In mathematics, the unitary approach entails determining the value of a single unit in a certain circumstance and using that value to resolve other issues that are connected to it. It is a quick and efficient method for handling issues involving direct proportion, indirect proportion, and other circumstances of a same nature. In disciplines including mathematics, science, business, and engineering, the unitary technique is widely employed.
given
Let V be the computer's starting value.
The computer's value drops to V/2 after four years.
The computer's value is decreased to V/2 1/2 = V/4 after six years.
We are informed that the PC will be worth $835 after six years. When we set this equal to V/4, we obtain:
V/4 = 835
Adding 4 to both sides results in:
V = 4 × 835 = $3340
Thus, the computer was initially worth $3340 as the PC will be worth $835 after six years.
To know more about unitary method visit:
https://brainly.com/question/28276953
#SPJ1
What is the height of the tree?
Answer:
72 ft
Step-by-step explanation:
Alright so two ways you can solve this, but the easier one (imo) is to find the scale factor by doing 24/2 since its an enlargement, and multiplying 6 by the scale factor (12)
Write the numeral for nine hundred thousand and twelve.
Answer: 900,012
Step-by-step explanation:
Answer: 900,012
this is because, nine hundred thousand is shown as 900,000 in number form
and then you just add 12 to that number, making it 900,012
two cards are drawn without replacement from a standard deck of 52 playing cards. what is the probability at least one of them is spades
To find the probability that at least one of the two cards drawn from a standard deck of 52 playing cards is a spade, we can use the complement rule.
The complement of the event "at least one of the cards is a spade" is "neither of the cards is a spade."
The probability that the first card is not a spade is 39/52 since there are 39 non-spade cards out of a total of 52 cards. Once the first non-spade card has been drawn, there will be 51 cards remaining, of which 38 are non-spades. Thus, the probability that the second card is also not a spade is 38/51.To find the probability that neither of the two cards is a spade, we can multiply the probabilities of drawing a non-spade on the first card and a non-spade on the second card:
P(neither is spade) = (39/52) x (38/51) = 0.4498 (rounded to four decimal places)
The probability that at least one of the two cards is a spade is equal to 1 minus the probability that neither of the cards is a spade:P(at least one is spade) = 1 - P(neither is spade)
P(at least one is spade) = 1 - 0.4498
P(at least one is spade) = 0.5502 (rounded to four decimal places)
Therefore, the probability that at least one of the two cards drawn from a standard deck of 52 playing cards is a spade is 0.5502 or approximately 55.02%.
To learn more about “probability” refer to the https://brainly.com/question/13604758
#SPJ11
A hexagon with an area of 75 square inches is dilated by a scale factor of 3. What is the area of the new hexagon?
From the given information provided, the area of the new hexagon when dilated by scale factor is 675 square inches.
When a polygon is dilated by a scale factor of k, its area is multiplied by k².
A hexagon is a six-sided polygon. It is a flat shape with straight sides, and all six of its angles add up to 720 degrees.
In this case, the hexagon is being dilated by a scale factor of 3, so the area of the new hexagon will be:
Area of new hexagon = (scale factor)² x Area of original hexagon
Area of new hexagon = 3² x 75
Area of new hexagon = 9 x 75
Area of new hexagon = 675 square inches
Therefore, the area of the new hexagon is 675 square inches.
Learn more about area here: brainly.com/question/25292087
#SPJ4
CAN SOMEONE PLS HELP ME WITH THIS LIKE QUICKLY
Answer:
The solutions to the equation x² = 196 are:
x = 14 or x = -14
Therefore, the smallest answer is -14 and the largest answer is 14.
X = -14 or 14
mark me and brainliest
Sam, Larry, and Howard have contracted to paint a large room in a house. After calculating all the material costs, which are to be paid by the homeowner, they decide that $270 would be a fair price for the 16 hours it will take to prepare, paint, and clean up. Each of the men decides that $15.00 an hour is a fair wage for the job. If three-quarters of the work will be done by Larry, how much will Larry be paid for his work on the job?
Answer:
180 dollars
Step-by-step explanation:
270 for 16 hours = 16.875 dollars for each hour
15.00 an hour will be paid to larry
larry is doing 3/4 of those 16 hours
12 hours
15 x 12
larry gets 180 dollars for 12 hours of work
hope this helps x
Work out (1 + 9)² +5
Answer:
105
Step-by-step explanation:
10² is 100
100+5=105
a gallon of milk is approximately 4 liters. how many gallon containers of air will it take to full one cubic meter (1 m3)? select the appropriate set-up for this calculation.
A gallon of milk is approximately 4 liters. 250 gallon containers of air will it take to full one cubic meter.
The setup for calculating how many gallon containers of air it will take to fill one cubic meter is:
1 m³ × 1000 L/m³ ÷ 4 L
A gallon of milk is approximately equal to 4 liters.
1 cubic meter (1 m³) of air is equal to 1000 liters.
One cubic foot of water contains 7.48 gallons. Dividing the total number of gallons by 7.48 will get the cubic feet equivalent.
To convert liters to gallons,
divide by 4 (since 1 gallon is approximately equal to 4 liters).
The calculation for how many gallon containers of air it will take to fill one cubic meter is:
1 m³ × 1000 L/m³ ÷ 4 L = 250 gallons.
for such more question on liters to gallons conversion
https://brainly.com/question/29366756
#SPJ11
The forecast maximum temperature, in degrees Celsius, and the observed maximum temperature are recorded to determine the accuracy in the temperature prediction models used by the weather bureau.
Around noon, when the forecast temperature is about 4 degrees Celsius higher than the measured temperature, the difference is at its greatest.
what is correlation coefficient ?The strength and direction of the linear connection between two variables are measured by the correlation coefficient. Its value goes from -1 to 1, and it is represented by the symbol "r". A perfect negative correlation, or r = -1, implies that as one variable rises, the other variable falls in an exact predictable manner. There is no linear relationship between the two variables if r = 0, which implies there is no correlation between the two variables. When r = 1, there is a perfect positive correlation, meaning that when one measure rises, the other rises in an exact predictable manner.
given
The maximum temperature for a specific day is shown in the provided image alongside the predicted maximum temperature.
The blue line depicts the expected maximum temperature, while the red line depicts the actual maximum temperature.
We can see that throughout the day, the forecast temperature is typically greater than the actual temperature.
Around noon, when the forecast temperature is about 4 degrees Celsius higher than the measured temperature, the difference is at its greatest.
To know more about correlation coefficient visit:
https://brainly.com/question/15577278
#SPJ1
Find the supplementary angles formed by the line y=3x-5 and the line 4x-3y=1
What is the effect on the graph of the function f(x) = 2^x when f(x) is replaced with f(x − 3)? A.)translate horizontally 3 units right B.) translate vertically 3 units down C.) translate horizontally 3 units left D.) translate vertically 3 units up
Answer:
a
Step-by-step explanation:
I just did the test
Answer:
The effect on the graph of the function f(x) = 2^x when f(x) is replaced with f(x − 3) is that it translates horizontally 3 units right.
When a function is replaced with f(x - c), where c is a positive constant, the graph of the function shifts horizontally c units to the right. Similarly, if c is negative, the graph shifts horizontally c units to the left.
Therefore, replacing f(x) with f(x - 3) in the function f(x) = 2^x shifts the graph of the function horizontally by 3 units to the right.
Please mark this answer as Brainliest!!
Jessica went deep sea diving. She make the first stop on her descent at 25 meters below the surface of the water. From that point she dives down further, stopping every 5 meters. If she makes 4 additional stops, which number represents her position, relative to the surface of the water?
*
A 45
B 20
C -20
D -45
Answer:
-45
Step-by-step explanation:
Given that New Mexico has a population of about 12 people per square miles and
an area of about 120,000 square miles, what is the population of New Mexico
Mark only one oval.
10,000
1,000,000
1,440,000
2,400,000
Answer:
1440000
Step-by-step explanation:
Since for every mile, there are 12 people, we have 120000 miles. If we multiply 12 by 120000, we get 1440000.
a conical paper cup is 30 cm tall with a radius of 10 cm. the cup is being filled with water so that the water level rises at a rate of 2 cm/sec. at what rate is water being poured into the cup when the water level is 4 cm?
The rate at which water is being poured into the conical paper cup when the water level is 4 cm is 707.1067 cm3 / 353.5534 seconds = 2 cm/sec.
The rate at which water is being poured into the conical paper cup with a height of 30 cm and a radius of 10 cm when the water level is 4 cm is determined by the volume of water that must be added to the cup in order to raise the water level from 0 cm to 4 cm. The volume of a cone is
V = (1/3)πr2h.
Therefore, the volume of water added to the cone when the water level is 4 cm is
V = (1/3)π × 102 × (30 - 4) = 707.1067 cm3.
Since the water level is rising at a rate of 2 cm/sec, it will take 707.1067 cm3 / 2 cm/sec = 353.5534 seconds to add the necessary water to the cup to raise the water level to 4 cm.
for such more question on rate
https://brainly.com/question/119866
#SPJ11
PLEASE SHOW FULL SOLUTIONS FOR BOTH QUESTIONS AND ONLY ANSWER IF YOU KNOW! NO CALCULUS PLEASE! THAT WOULD BE VERY APPRECIATED!!
Answer:
5. 3 cm × 2 cm × 7 cm
6. f(x) = x³ -3x² -x +3
Step-by-step explanation:
You want the dimensions of a cuboid with edges marked (x-1), (x-2), and (x+3) and a volume of 42 cm³. You also want the coefficients of a monic cubic f(x) with values f(2) = -3, f(-3) = -48, and f(-1) = f(1).
5. CuboidThe volume of the cuboid is the product of its dimensions, so we have ...
V = LWH
42 = (x -1)(x -2)(x +3)
The value of x can be found as the solution to this equation. A graphical solution is attached. It shows x=4, so the dimensions are ...
4 -1 = 3
4 -2 = 2
4 +3 = 7
The dimensions of the cuboid are 3 cm by 2 cm by 7 cm.
Note that the prime factors of 42 are 2, 3, 7, which have the required differences. You don't really need a polynomial to guess these are the dimensions.
The expanded polynomial is x³ -7x -36 = 0, so potential rational roots will be from the set {1, 2, 3, 4, 6, 9, 12, 18, 36}. An estimate of the upper bound of the real root puts it at ∛36 +√7 ≈ 5.9. We require x > 2, so the viable choices for testing are 3 and 4. x=4 is the solution.
6. CoefficientsThe remainder theorem tells you that the remainder from dividing f(x) by (x-a) is f(a). To obtain linear equations in b, c, d, we can rearrange the function to ...
bx² +cx +d = -x³ +f(x)
For x = ±1, we know the remainders f(x) are the same, so we can look at the difference of the equations for these x-values.
(b(-1)² +c(-1) +d) - (b(1)² +c(1) +d) = (-(-1)³ +f(-1)) - (-(1)³ +f(1))
b -b -c -c +d -d = 1 -(-1)
-2c = 2
We can fill in values x=2, x=-3 to get two more equations in b, c, d. The coefficients of the three equations we have for the three unknowns are shown in the second attachment. The third attachment shows the solution of these equations is (b, c, d) = (-3, -1, 3).
The table in the first attachment confirms the remainders using these coefficients.
__
Additional comment
For problem 6, we started out using synthetic division, then realized the resulting equations are the same as those developed using the rearranged form shown above. We like to let calculators and spreadsheets do the tedious arithmetic where possible.
Answer:
5)The dimensions of the rectangular prism are 3 , 7 and 2.
6) f(x) = x³ - 3x² - x + 3
Step-by-step explanation:
5) The volume of rectangular prism = l*w*h.
l*w*h= 42
(x- 1)(x -2)(x+3) = 42
We can find (x - 2) *(x + 3) using the identity (x + a)(x + b) = x² + (a +b)*x + ab
(x - 2)(x + 3) =x² + (-2 +3)x + (-3)*2
= x² + 1x - 6
(x -1)(x + 3)(x - 2) = 42
(x - 1)(x² + x - 6) = 42
x*x² + x*x - 6*x + (-1)*x² + (-1) *x + (-1)(-6) = 42
x³ + x² - 6x - x² - x + 6 - 42 = 0
x³ + x² - x² - 6x - x + 6 -42 = 0
Combine the like terms,
x³ - 7x - 36 = 0
Find the zeros of the cubic polynomial by synthetic division method.
4 1 0 -7 -36
4 16 36
1 4 9 0
x - 4 is zero of the polynomial.
Ignore the quadratic polynomial x² + 4x + 9 as it will have irrational roots(zeros) and dimensions will be always positive integer.
x - 4 = 0
x = 4
length = x - 1 = 4 - 1 = 3
Width = x + 3 = 4 + 3 = 7
Height = x - 2 = 4 - 2 = 2
The dimensions of the rectangular prism are 3 , 7 and 2.
6) f(x) = x³ + bx² + cx + d
It is given that when f(x) is dived by x + 1 and x- 1, the remainders are same.
x + 1 = 0 ; x - 1 = 0
x = -1 ; x = 1
f(-1) = f(1)
-1 + b - c + d = 1 + b + c + d
-1 -1 + b - b - c - c + d - d = 0
-2 - 2c = 0
-2c = 2
c = 2 ÷ (-2)
[tex]\boxed{c = -1}[/tex] -------------(I)
It is given that when f(x) divided by ( x - 2) it leaves a remainder (-3)
f(2) = -3
8 + 4b + 2c + d = -3
8 + 4b + 2*(-1) + d = -3 {from (I)}
8 + 4b - 2 + d = -3
4b + d = -3 + 2 - 8
4b + d = -9 -------------(II)
It is given that when f(x) divided by ( x + 3) it leaves a remainder (-48).
f(-3) = -48
-27 + 9b - 3c + d = -48
-27 + 9b - 3*(-1) +d = -48 {From (I)}
-27 + 9b + 3 + d = - 48
9b + d = -48 + 27 - 3
9b + d = -24 --------------(III)
Subtract equation (III) from equation (II),
(II) 4b + d = -9
(III) 9b + d = -24
- - +
-5b = 15
b = 15 ÷ (-5)
[tex]\boxed{b=-3}[/tex]
Plugin b = -3 in equation (II),
4*(-3) + d = -9
-12 + d = -9
d = -9 + 12
[tex]\boxed{d = 3}[/tex]
[tex]\boxed{\bf f(x) = x^3 - 3x^2 -x + 3 }[/tex]
if you have heteroskedasticity such that the sample can be divided into groups with each group having a different error variance, what estimation technique should be used?
One possible technique to address heteroscedasticity with group-specific variances is the use of weighted least squares (WLS) estimation, where observations from each group are assigned weights that are inversely proportional to the variance of the error term in that group.
Heteroscedasticity refers to the situation where the variance of the error term in a regression model is not constant across different levels of the independent variable(s). This violates the assumption of homoscedasticity, which can lead to biased and inefficient estimates of the model parameters.
When the heteroscedasticity is related to group-specific variances, a possible solution is to use WLS estimation. This involves calculating weights for each observation based on the inverse of the estimated variance of the error term in its group. By doing so, observations with larger variances are given smaller weights, while observations with smaller variances are given larger weights, which effectively downweighs the influence of more variable observations.
The resulting WLS estimator is more efficient and less biased than the standard OLS estimator, and it can lead to more accurate inferences about the relationship between the independent and dependent variables. However, WLS requires the researcher to specify the appropriate weights for each observation, which can be challenging and subjective in practice.
For more questions like Heteroskedasticity visit the link below:
https://brainly.com/question/30463266
#SPJ11
Please help with these 2 problems asap !! 15 points
Answer:
11. 17
12. -16
Step-by-step explanation: