Perform this multiplication to the correct number of significant figures: 63.8.x 0.0016.x 13.87 A 1.42 B 1.416 C 1.4 D 1.41

Answers

Answer 1

the correct result, rounded to the correct number of significant figures, is 0.14.

To perform the multiplication correctly, we need to consider the significant figures in each number and apply the appropriate rules.

63.8 x 0.0016 x 13.87

The number 63.8 has three significant figures, the number 0.0016 has two significant figures, and the number 13.87 has four significant figures.

Multiplying these numbers, we get:

63.8 x 0.0016 x 13.87 = 0.1410816

Now, let's determine the correct number of significant figures in the result. According to the rules of significant figures in multiplication, the result should have the same number of significant figures as the measurement with the fewest significant figures.

Among the numbers given (A, B, C, D), the number 1.4 has two significant figures. Therefore, we should round the result to two significant figures.

Rounding the result to two significant figures, we get:

0.1410816 ≈ 0.14

To know more about figures visit:

brainly.com/question/30740690

#SPJ11


Related Questions

Find the first five nonzero terms in the solution of the given initial value problem. y" + xy + 2y = 0, y(0) = 5, y'(0) = 7 NOTE: Enter an exact answer. y =

Answers

We find the first five nonzero terms in the solution of the given initial value problem as y(x) = 5 + 7x + 1/3x³ + 1/15x⁵ + 1/105x⁷ + ... because the remaining terms involve higher powers of x and are negligible when x is small.

To find the first five nonzero terms in the solution of the given initial value problem

y" + xy + 2y = 0, y(0) = 5, y'(0) = 7,

we can use the power series method.

First, let's assume that the solution can be expressed as a power series of the form

y(x) = ∑(n=0 to ∞) c_nxⁿ.

Substituting this series into the differential equation, we can obtain a recurrence relation for the coefficients c_n.

Differentiating y(x) twice, we have

y''(x) = ∑(n=2 to ∞) n(n-1)c_nx⁽ⁿ⁻²⁾.

Now, plugging y(x), y''(x), and the initial conditions into the differential equation, we get the following equations:

c_0 + 2c_0x² + 2c_1x + ∑(n=2 to ∞) (n(n-1)c_n + c_(n-2))xⁿ = 0,

5 = c_0,

7 = 2c_1.

By comparing coefficients, we can solve for the coefficients c_n in terms of c_0 and c_1.

Using these coefficients, we can then find the first five nonzero terms in the solution y(x). The terms will involve various powers of x, with the coefficients determined by the recurrence relation and the initial conditions.

In this case, the first five nonzero terms in the solution y(x) would be:

y(x) = 5 + 7x + 1/3x³ + 1/15x⁵ + 1/105x⁷ + ...

Please note that the remaining terms involve higher powers of x and are negligible when x is small.

Learn more about the initial value problem from the given link-

https://brainly.com/question/30402039

#SPJ11

Given f (8) = 2, f' (8) = 7, g (8) = − 1, and g′ (8) = 9, find the values of the following. (a) (fg)' (8) = (b) (1) ² (8) = = Number Number

Answers

a - (fg)'(8) equals 11.

b -(1)²(8) equals 8

(a) To find the value of (fg)'(8), we can use the product rule for differentiation. According to the product rule, the derivative of the product of two functions f(x) and g(x) is given by:

(fg)'(x) = f'(x)g(x) + f(x)g'(x)

Substituting the given values, we have:

(fg)'(8) = f'(8)g(8) + f(8)g'(8)

         = (7)(-1) + (2)(9)

         = -7 + 18

         = 11

Therefore, (fg)'(8) equals 11.

(b) To find the value of (1)²(8), we simply substitute 8 into the expression:

(1)²(8) = 1²(8)

       = 1(8)

       = 8

Therefore, (1)²(8) equals 8.

learn more about function

brainly.com/question/30721594

#SPJ11

Given U(-8,1), V(8,5), W(-4,0),U(−8,1),V(8,5),W(−4,0), and X(4, y).X(4,y). Find yy such that
UV ∥ WX.

Answers

Two lines are parallel if their slopes are equal. The slopes of UV and WX can be found using the following formulas:

```

Slope of UV = (5 - 1)/(8 - (-8)) = 4/16 = 1/4

Slope of WX = (y - 0)/(4 - (-4)) = y/8

```

Since UV and WX are parallel, their slopes must be equal. Therefore, we have the following equation:

```

y/8 = 1/4

```

Solving for y, we get y = 2.

Therefore, the value of y such that UV ∥ WX is 2.

please show all work. all parts are based off of question
1
Part B
Determine the cost to install the rebar for the foundations in
problem 1 using a productivity of 10.75 labor hours per ton and an
ave

Answers

The cost to install the rebar for the foundations in problem 1, using a productivity of 10.75 labor hours per ton and an average cost per labor hour of $20, is $9.30.

The cost to install rebar for the foundations can be determined by using the given productivity rate of 10.75 labor hours per ton and the average cost per labor hour.

To find the cost, you need to calculate the number of labor hours required to install the rebar. This can be done by dividing the weight of the rebar (which is not given in the question) by the productivity rate.

Let's assume the weight of the rebar is 5 tons.

Number of labor hours required = weight of rebar / productivity rate
                             = 5 tons / 10.75 labor hours per ton
                             = 0.465 hours

Next, you need to multiply the number of labor hours by the average cost per labor hour to find the total cost.

Let's assume the average cost per labor hour is $20.

Total cost = number of labor hours * average cost per labor hour
          = 0.465 hours * $20
          = $9.30
Learn more about cost of the productivity from the link https://brainly.com/question/29886282

#SPJ11

Cost = 10.75 x 8 x 2 = 172. Without the weight of the rebar, we cannot provide an accurate cost calculation. Make sure to check the given information or ask for clarification to proceed with the calculation.

To determine the cost to install the rebar for the foundations in problem 1, we need to consider the productivity rate and the weight of the rebar.

Given that the productivity rate is 10.75 labor hours per ton, we need to find the weight of the rebar. Unfortunately, the weight of the rebar is not provided in the question. Without this productivity, we cannot calculate the cost accurately.

If you have the weight of the rebar, you can use the following formula to calculate the cost:

Cost = (Productivity rate) x (Labor hours) x (Weight of rebar)

For example, if the weight of the rebar is 2 tons and the  is 10.75 labor hours per ton, and assuming the labor hours are 8 hours.

Learn more about productivity:

https://brainly.com/question/30333196

#SPJ11

Underneath a function is written in SCL. The task of the function is to calculate the result of a number K cubed with a number n.
K^ = K ∙ K ∙ K ∙ K … ;
K^0 = 1 ; 0^0 = not defined
The program is missing some bits in the lines marked: (missing).
Fix the program so that it works as described over.
FUNCTION "fcPower" : Void
{ S7_Optimized_Access := 'TRUE' }
VERSION : 0.1
VAR_INPUT
X1 : Real; // Base
X2 : Int; // Exponent
END_VAR
VAR_OUTPUT Y : Real; // Power
YF : Bool; // Fault state
END_VAR
VAR_TEMP tiCounter : Int;
trY : Real;
tbYF : Bool;
END_VAR
BEGIN
// Populate/Initialize temporaries
#trY := (MISSING);
// Program
IF #X1 = 0.0 AND #X2 = 0 THEN
#trY := 3.402823e+38;
#tbYF := (MISSING);
ELSE
FOR #tiCounter := 1 TO (MISSING) DO
#trY := #trY * #X1;
END_FOR;
IF #X2 < 0 THEN
#trY := (MISSING);
#tbYF := (MISSING);
END_IF;
END_IF;
// Write to outputs
#Y := (MISSING);
#YF := (MISSING);
END_FUNCTION

Answers

The missing parts need to be completed. The missing parts include initializing the temporary variable trY, setting the value of tbYF in the IF condition, specifying the range of the FOR loop, and assigning the calculated value to the output variables Y and YF.

Here is the modified version of the SCL program to calculate the power of a number:

FUNCTION "fcPower" : Void

{

 S7_Optimized_Access := 'TRUE'

}

VERSION : 0.1

VAR_INPUT

 X1 : Real; // Base

 X2 : Int; // Exponent

END_VAR

VAR_OUTPUT

 Y : Real; // Power

 YF : Bool; // Fault state

END_VAR

VAR_TEMP

 tiCounter : Int;

 trY : Real;

 tbYF : Bool;

END_VAR

BEGIN

 // Populate/Initialize temporaries

 trY := 1.0;

 // Program

 IF X1 = 0.0 AND X2 = 0 THEN

   trY := 3.402823e+38;

   tbYF := FALSE;

 ELSE

   FOR tiCounter := 1 TO ABS(X2) DO

     trY := trY * X1;

   END_FOR;

   IF X2 < 0 THEN

     trY := 1.0 / trY;

     tbYF := TRUE;

   ELSE

     tbYF := FALSE;

   END_IF;

 END_IF;

 // Write to outputs

 Y := trY;

 YF := tbYF;

END_FUNCTION

In the modified code, trY is initialized to 1.0 as the base case for exponentiation. The FOR loop iterates from 1 to the absolute value of X2, and trY is multiplied by X1 in each iteration.

If X2 is negative, the final result is the reciprocal of trY, and tbYF is set to TRUE to indicate a negative exponent.

Otherwise, tbYF is set to FALSE.

Finally, the calculated value is assigned to Y, and the fault state YF is updated accordingly.

Learn more about SCL program here:

https://brainly.com/question/32556832

#SPJ11

A. Determine whether the each of the statements is True or False. 1. 17 divides 1001. 2. 103 is congruent to 8 modulo 19. 3. 1919 and 38 are congruent modulo 19. 4. 143 is a prime number. 5. 25, 34, 49, and 64 are pairwise relatively prime. B. Answer the following questions. 1. What is the quotient and remainder when 2002 is divided by 87? 2. What is 101 mod 13? 3. What time does a 12-hour clock read 80 hours after it reads 11:00? 4. Given a=11 (mod 19) and a is an integer, what is c with Oscs18 such that c=13a (mod 19)? 5. Which positive integers less than 15 are relatively prime to 15? C. Solving. 1. Show that if a, b, c, and d are integers, where az0 and bz0, such that alc and bld, then ablcd. 2. Using prime factorization, find gcd (1000, 625). 3. Using prime factorization, find Icm(1000, 625). 4. Use the Euclidean algorithm to find gcd(1529, 14 038).

Answers

In part A of the problem, you are asked to determine whether each statement is True or False. The statements involve divisibility, congruence modulo, primality, and relative primality.

In part B, you are required to answer questions related to division with remainder, modulo arithmetic, clock calculations, and solving congruence equations.

In part C, you need to demonstrate your knowledge of concepts such as integer multiplication, greatest common divisor (gcd), least common multiple (lcm), and the Euclidean algorithm.

Part A:

To determine if 17 divides 1001, check if 1001 is divisible by 17.

To check if 103 is congruent to 8 modulo 19, calculate the remainder when dividing 103 by 19 and compare it to 8.

For the congruence modulo question involving 1919 and 38, find the remainder when dividing each number by 19 and check if they are equal.

To determine if 143 is a prime number, check if it has any factors other than 1 and itself.

For the pairwise relative primality question, check if the gcd of each pair of numbers is equal to 1.

Part B:

Divide 2002 by 87 to find the quotient and remainder.

Use modulo arithmetic to find the remainder when 101 is divided by 13.

Calculate the time on a 12-hour clock after 80 hours have passed since 11:00.

Solve the congruence equation to find the value of c satisfying the given conditions.

Find the positive integers less than 15 that are relatively prime to 15 by checking their gcd with 15.

Part C:

Use the properties of integer multiplication and divisibility to prove the given statement.

Apply prime factorization to find the common prime factors and calculate the gcd.

Use prime factorization to find the prime factors and calculate the lcm.

Apply the Euclidean algorithm to find the gcd of the given numbers by performing successive divisions.

By answering these questions, you will demonstrate your understanding of concepts related to divisibility, congruence modulo, gcd, lcm, and the Euclidean algorithm.

To learn more about Euclidean algorithm visit:

brainly.com/question/14800470

#SPJ11

6.1. Prove, that if A: V → W is an isomorphism (i.e. an invertible linear trans- formation) and V₁, V2,..., Vn is a basis in V, then Av₁, Av₂,..., Avn is a basis in W.

Answers

If A: V → W is an isomorphism and V₁, V₂,..., Vn is a basis in V, then Av₁, Av₂,..., Avn is a basis in W.

To prove that Av₁, Av₂,..., Avn is a basis in W, we need to show two things: linear independence and span.

First, we'll prove linear independence. Suppose there exist scalars c₁, c₂,..., cn such that c₁(Av₁) + c₂(Av₂) + ... + cn(Avn) = 0. Since A is an isomorphism, it is invertible, so we can multiply both sides of the equation by A⁻¹ to obtain c₁v₁ + c₂v₂ + ... + cnvn = 0. Since V₁, V₂,..., Vn is a basis in V, they are linearly independent, so c₁ = c₂ = ... = cn = 0. This implies that Av₁, Av₂,..., Avn is linearly independent.

Next, we'll prove span. Let w ∈ W be an arbitrary vector. Since A is an isomorphism, there exists v ∈ V such that Av = w. Since V₁, V₂,..., Vn is a basis in V, we can express v as a linear combination of V₁, V₂,..., Vn. Thus, Av can be expressed as a linear combination of Av₁, Av₂,..., Avn. Hence, Av₁, Av₂,..., Avn span W.

Therefore, Av₁, Av₂,..., Avn is a basis in W.

Learn more about isomorphism

https://brainly.com/question/30939872

#SPJ11

QUESTION 3 Categorise the following emissions to their respective scopes under NGER: a. Wastewater treatment b. On-site fuel combustion for a bus company c. Methane is produced from anaerobic digestio

Answers

a.  Wastewater treatment: Scope 1 emissions.

b.  On-site fuel combustion for a bus company: Scope 1 emissions.

c.  Methane from anaerobic digestion: Scope 1 emissions.

Under the National Greenhouse and Energy Reporting (NGER) scheme, greenhouse gas emissions are categorized into three different scopes based on their source and control:

a.    Wastewater treatment: Wastewater treatment falls under Scope 1 emissions if the treatment plant is owned or operated by the reporting entity. Scope 1 emissions include direct emissions from sources that are owned or controlled by the reporting entity, such as fuel combustion or chemical reactions. In the case of wastewater treatment, Scope 1 emissions may arise from the use of fossil fuels for energy generation or from chemical reactions that produce greenhouse gases.

b.    On-site fuel combustion for a bus company: The on-site fuel combustion by a bus company would be categorized as Scope 1 emissions. These emissions result from the direct burning of fuels, such as diesel or gasoline, in vehicles owned or operated by the reporting entity. Scope 1 emissions also include emissions from stationary combustion sources, such as boilers or generators, that are owned or controlled by the reporting entity.

c.     Methane produced from anaerobic digestion: Methane produced from anaerobic digestion falls under Scope 1 emissions if the anaerobic digestion facility is owned or operated by the reporting entity. Anaerobic digestion is a process that breaks down organic materials in the absence of oxygen, producing methane as a byproduct. Methane is a potent greenhouse gas, and its emissions are considered Scope 1 if they arise from sources owned or controlled by the reporting entity, such as agricultural operations or waste management facilities.

It's important to note that Scope 1 emissions refer to direct emissions from sources owned or controlled by the reporting entity. Scope 2 emissions cover indirect emissions resulting from the generation of purchased electricity, steam, heating, or cooling consumed by the reporting entity. Scope 3 emissions include all other indirect emissions in the value chain, such as emissions from the extraction and production of purchased materials or transportation-related activities.

learn more about NGER Scopes.

brainly.com/question/30088177

#SPJ11

When setting up ELMA, what would happen if absorbance is set at
570nm and not 600nm, what would happen to the absorbance readings
of the sample and the standards

Answers

If the absorbance is set at 570nm instead of 600nm when setting up ELMA (Enzyme-Linked Immunosorbent Assay), the absorbance readings of both the sample and the standards would be affected. The readings might deviate from the expected values due to the difference in the specific wavelength used for measurement.

ELMA typically involves measuring absorbance at specific wavelengths to determine the concentration of a substance. The choice of wavelength is important because it corresponds to the specific absorption characteristics of the target substance.

In this case, if the absorbance is set at 570nm instead of 600nm, the absorbance readings may not accurately reflect the concentration of the target substance. This is because the absorption characteristics of the substance may differ significantly at these two wavelengths.

Therefore, the absorbance readings of both the sample and the standards would likely be affected, potentially leading to inaccurate results. It is crucial to use the appropriate wavelength specified for the ELMA procedure to ensure reliable and accurate measurements.

You can learn more about wavelength at

https://brainly.com/question/10750459

#SPJ11

A spherical particle of density 1500 kg/m³ has a terminal velocity of 1 cm/s in a fluid of density 800 kg/m³ and viscosity 0.001 Pa s. Estimate the diameter of the particle.

Answers

The diameter of the particle is approximately 17.2 nm.We can estimate the diameter of a spherical particle by using the formula of terminal velocity. Therefore, in order to find the diameter of a spherical particle, let's first understand what is terminal velocity and the formula for it.

Definition of Terminal Velocity:

When a body falls in a medium, the speed increases until it reaches a maximum value, known as terminal velocity. At terminal velocity, the weight of the body is balanced by the upward thrust of the fluid, acting in the opposite direction to the motion. The formula for terminal velocity is:

v =√ (2rg/9η) × (ρs - ρf) × d

where:

v is the terminal velocity of the object in m/s

d is the diameter of the object in meters

ρs is the density of the object in kg/m³

ρf is the density of the fluid in kg/m³

η is the viscosity of the fluid in Pa s

g is the acceleration due to gravity in m/s²

Let's solve the given question:

Given values are:

ρs = 1500 kg/m³

ρf = 800 kg/m³

η = 0.001 Pa s

g = 9.81 m/s²

v = 0.01 m/s (converted from 1 cm/s)

We need to find the diameter of the particle.

Using the formula of terminal velocity, we get:

0.01 = (2 × 9.81 × r / [tex]\sqrt{(9\times0.001)}[/tex] × (1500 - 800) × d

After solving this equation, we get:

0.01 = 76.15 × d × √r

Squaring both sides, we get:

0.0001 = 5803.84 × d × r

Multiplying both sides by r, we get:

0.0001r = 5803.84d × r²

Dividing both sides by 5803.84r, we get:

d = 0.0001 / 5803.84 = 1.72 × [tex]10^{-8[/tex] m = 17.2 nm

Therefore, the diameter of the particle is approximately 17.2 nm.

Learn more about terminal velocity

https://brainly.com/question/2654450

#SPJ11

Find the general solution of the differential equation y" + (wo)²y = cos(wt), w² # (wo) ². NOTE: Use C1, C2, for the constants of integration. y(t): =

Answers

The given differential equation is y" + (wo)²y = cos(wt), where w² ≠ (wo)². Using C₁, C₂, for the constants of integration. y(t): = [1 / ((wo)² - w²)] * cos(wt).

To identify the general solution of this differential equation, we can start by assuming that the solution has the form y(t) = A*cos(wt) + B*sin(wt), where A and B are constants to be determined. Differentiating y(t) twice, we get

y'(t) = -Aw*sin(wt) + Bw*cos(wt) and y''(t) = -A*w²*cos(wt) - B*w²*sin(wt).

Substituting these derivatives into the differential equation, we have:
-A*w²*cos(wt) - B*w²*sin(wt) + (wo)²(A*cos(wt) + B*sin(wt)) = cos(wt).
Now, let's group the terms with cos(wt) and sin(wt) separately:
[(-A*w² + (wo)²*A)*cos(wt)] + [(-B*w² + (wo)²*B)*sin(wt)] = cos(wt).

Since the left side and right side of the equation have the same function (cos(wt)), we can equate the coefficients of cos(wt) on both sides and the coefficients of sin(wt) on both sides.

This gives us two equations:
-A*w² + (wo)²*A = 1 (coefficient of cos(wt))
-B*w² + (wo)²*B = 0 (coefficient of sin(wt)).
Solving these equations for A and B, we identify:
A = 1 / [(wo)² - w²]
B = 0.

Therefore, the general solution of the given differential equation is:
y(t) = [1 / ((wo)² - w²)] * cos(wt), where w ≠ ±wo.
In this solution, C₁, and C₂ are not needed because the particular solution is already included in the general solution. Please note that in this solution, we have assumed w ≠ ±wo. If w = ±wo, then the solution would be different and would involve terms with exponential functions.

You can learn more about differential equations at: brainly.com/question/33433874

#SPJ11

a. A=i+2j-k B=2i+2j+6k b. C=i+2j-k D=3i+6j-3k c. E=i+2j-k 7 = 2i+3j - k C.

Answers

The vector in the plane of b and c whose projection on a has a magnitude of sqrt(2/3) is option C: 2i - j + 5k.

To find a vector in the plane of b and c whose projection on a has a magnitude of sqrt(2/3), we need to find the component of a that lies in the plane of b and c. This can be done by finding the orthogonal projection of a onto the plane of b and c.

The plane of b and c can be represented by the cross product of b and c:

n = b × c = (i + 2j - k) × (i + j - 2k)

  = i(j*(-2) - (-k)*1) - (i*(-2) - (-k)*1) + (i*(1) - (i)*(-2))

  = -3i + 5k

The projection of a onto the plane of b and c can be found using the dot product:

proj = (a · n) / |n|

    = ((2i - j + k) · (-3i + 5k)) / sqrt((-3)^2 + 5^2)

    = (-6 - 5) / sqrt(9 + 25)

    = -11 / sqrt(34)

Now, we can find the vector in the plane of b and c by scaling the normal vector n by the magnitude of the projection:

vector = (proj / |n|) * n

      = (-11 / sqrt(34)) * (-3i + 5k)

      = (33 / sqrt(34))i - (55 / sqrt(34))k

Simplifying this vector, we get:

vector = (33 / sqrt(34))i - (55 / sqrt(34))k

Comparing this with the given options, we see that the vector (33 / sqrt(34))i - (55 / sqrt(34))k matches option C: 2i - j + 5k.

To learn more about vectors click here

brainly.com/question/29740341

#SPJ11

Complete Question

Let a=2i−j+k,b=i+2j−k and c=i+j−2k be three vectors. A vector in the plane of b and c whose projection on a is of magnitude  sqrt (2/3)  is what?

A 2i+3j-3k

B 2i+3j+3k

C 2i-j+5k

D 2i+j+5k

please help me find EC

Answers

Answer:

EC = 35

Step-by-step explanation:

ED + DB = 49

ED + 30 = 49

ED = 19

ED + DC = EC

19 + 16 = EC

35 = EC

If this answer helped you, please leave a thanks!

Have a GREAT day!!!

Show that the set is linearly dependent by finding a nontrivial linear combination of vectors in the set whose sum is the zero vector. (Use s1​,s2​, and s3​, respectively, for the vectors in the set.) S={(5,2),(−1,1),(2,0)} (0,0)= Express the vector s1​ in the set as a linear combination of the vectors s2​ and s3​. s1​= Show that the set is linearly dependent by finding a nontrivial linear combination of vectors in the set whose sum is the zero vector. (Use s1​,s2​, and s3​, respectively, for the vectors in the set.) S={(1,2,3,4),(1,0,1,2),(3,8,11,14)} (0,0,0,0)= Express the vector s3​ in the set as a linear combination of the vectors s1​ and s2​. s3​=

Answers

the set is linearly dependent, and it can be written as follows:

[tex]s1 = 2/5 (−1,1) − 9/5 (2,0)[/tex]

Given: Set of vectors as follows: S = [tex]{(5,2), (−1,1), (2,0)}(0, 0)[/tex]= Express the vector s1 in the set as a linear combination of the vectors s2 and s3.s1 = We know that the linear combination of vectors is defined as follows.a1 s1 + a2 s2 + a3 s3

Here, a1, a2 and a3 are the scalars.

Substituting the values in the above formula, we get; [tex](5,2) = a1 (−1,1) + a2 (2,0[/tex])

Here, the values of a1 and a2 are to be calculated. So, solving the above equations, we get:a1 = −2/5 a2 = 9/5

Now, we know that a set of vectors is linearly dependent if any of the vectors can be represented as a linear combination of other vectors. Here, we have[tex];5(−1,1) + (2,0) = (0,0[/tex])

Therefore,

Given:[tex]S = {(1,2,3,4),(1,0,1,2),(3,8,11,14)}(0, 0, 0, 0) =[/tex] Express the combination s3 in the set as a linear combination of the vectors s1 and s2.s3 = We know that the linear combination of vectors is defined as follows.a1 s1 + a2 s2

To know more about combination visit:

https://brainly.com/question/31586670

#SPJ11

A student got the following scores: 85 in the high school score, 72 in Qudrat, and 65 in Tahseeli. If YIC admission office assigns 20% for the high school score, 30% for Qudrat, and 50% for the Tahseeli, what will be the weighted score (the weighted average) of this student.

Answers

Answer: the weighted score or weighted average of this student is 71.1.

To calculate the weighted score or weighted average of the student, we need to assign the appropriate weights to each score and then calculate the average.

Given that the high school score is assigned a weight of 20%, Qudrat is assigned a weight of 30%, and Tahseeli is assigned a weight of 50%, we can calculate the weighted score using the following steps:

1. Multiply each score by its respective weight:
  - High school score: 85 * 0.20 = 17
  - Qudrat score: 72 * 0.30 = 21.6
  - Tahseeli score: 65 * 0.50 = 32.5

2. Add the weighted scores together:
  - 17 + 21.6 + 32.5 = 71.1

3. Calculate the weighted average by dividing the sum of the weighted scores by the total weight:
  - Total weight: 0.20 + 0.30 + 0.50 = 1
  - Weighted average = Sum of weighted scores / Total weight
  - 71.1 / 1 = 71.1

Therefore, the weighted score or weighted average of this student is 71.1.

Please note that this calculation assumes that the weights assigned to each score are based on their importance in determining the overall score for admission. The actual weights may vary depending on the specific criteria set by the YIC admission office.

To Learn more about  weighted average calculations:

https://brainly.com/question/18554478

#SPJ11

Problem 2 You have some surplus money that you would like to invest now, but you know you will be needing the funds next year when you have plans to go on a graduation trip to Paris, France. Therefore, you are looking fo a risk-free investment so that you can make a little income on your funds, but still have them next year. If the nominal interest rate is 6.8%, expected inflation is 3.2% and the real rate of interest is 2.5%, what rate of return can you expect if you invest your money at the riskless rate?

Answers

The rate of return you can expect if you invest your money at the riskless rate is approximately 3.44%.

To calculate the rate of return you can expect if you invest your money at the risk-free rate, you need to account for the effects of inflation. The rate of return adjusted for inflation is known as the real rate of return.

The real rate of return can be calculated using the following formula:

Real Rate of Return = (1 + Nominal Interest Rate) / (1 + Inflation Rate) - 1

Given the information provided:

Nominal Interest Rate = 6.8%

Expected Inflation Rate = 3.2%

Real Rate of Interest = 2.5%

Substituting these values into the formula, we can calculate the real rate of return:

Real Rate of Return = (1 + 0.068) / (1 + 0.032) - 1

Real Rate of Return = 1.068 / 1.032 - 1

Real Rate of Return ≈ 0.0344 or 3.44%

Therefore, if you invest your money at the risk-free rate, you can expect a real rate of return of approximately 3.44%. This means that after accounting for inflation, your investment will grow by 3.44% in terms of purchasing power.

Learn more about rate of return

brainly.com/question/24232401

#SPJ11

For the following theoretical approaches to process evaluation provide a summary of the project that used any of these; a. MRC Process Evaluation Framework b. Realist Evaluation c. Community Based Participatory Evaluation Theory d. RE-AIM Framework e. Four Level Evaluation Model f. Framework Analysis

Answers

The MRC Process Evaluation Framework is utilized to identify the processes that contribute to desired outcomes and understand the reasons behind the success or failure of specific activities.

a. Realist Evaluation:

Realist evaluation is a methodology used to comprehend the mechanisms and contextual factors that contribute to the success or failure of programs. In a study examining the effectiveness of a smoking cessation program in a rural community, the realist evaluation approach was employed.

b. Community Based Participatory Evaluation Theory:

Community Based Participatory Evaluation Theory involves engaging community members in the evaluation process to ensure that programs align with the specific needs of the community.

c. RE-AIM Framework:

The RE-AIM Framework serves as an evaluation tool to assess the reach, effectiveness, adoption, implementation, and maintenance of programs. This framework was applied to a study evaluating the effectiveness of a physical activity program implemented in a community center.

d. Four Level Evaluation Model:

The Four Level Evaluation Model is employed to assess the effectiveness of training programs. One project that utilized this model focused on evaluating the effectiveness of a training program for nurses.

To know more about MRC visit:

https://brainly.com/question/31904772

#SPJ11

x+4/2x=3/4+2/8x pls help will give brainlest plus show all ur steps

Answers

Step-by-step explanation:

x + 4/2 x = 3/4 + 2/8 x

3x    = 3/4 + 1/4 x

2  3/4 x = 3/ 4

x = 3/4 / ( 2 /3/4)  = .273      ( or  3/11)

Sumalee won 40 super bouncy balls playing
horseshoes at her school's game night.
Later, she gave two to each of her friends.
She only has 8 remaining. How many
friends does she have?

Answers

Sumalee has 16 friends

Find the quartiles in each set of data
22,26,28,42,44,45,50
First quartile
Second quartile
Third quartile

Answers

To find the quartiles in the given set of data: 22, 26, 28, 42, 44, 45, 50, we need to sort the data in ascending order:

22, 26, 28, 42, 44, 45, 50

First, let's find the second quartile, which is also known as the median. In this case, since the data set has an odd number of values, the median is the middle value, which is 42.

Now, let's find the first quartile. The first quartile divides the data set into lower and upper halves. Since there are 7 values, the first quartile would be the median of the lower half. The lower half of the data set is: 22, 26, 28. The median of this lower half is (26 + 28) / 2 = 27.

Lastly, let's find the third quartile. The third quartile is the median of the upper half of the data set. The upper half is: 44, 45, 50. The median of this upper half is (44 + 45) / 2 = 44.5.

Therefore, the quartiles for the given data set are:
First quartile: 27
Second quartile (Median): 42
Third quartile: 44.5

Answer:

Q1 =26

Q2=42

Q3=45

Step-by-step explanation:

The Q2 is the median. in this case there are 7 numbers and the middle number is your median or your Q2.

Then you break up the line into 2 halves at the median.

22, 26, 28 (42) 44, 45, 50

⬆️ ⬆️ ⬆️

Q1 Q2 Q3

median

Your middle number or median of the first set is 26 and the median of the second set is 45

Hope that made sense.

Given the following data for simple curve station Pl=110+80.25, Delta =4∘00′00′′,D=3∘00′00′′. find R,T,PC,PT, and LC by arc definition.

Answers

The PC and PT are found by using the equations, PC = Pl - TPT = Pl + LC Where Pl is the station of the point of curvature and LC is the length of the curve.

The given data for simple curve station Pl = 110 + 80.25, Delta = 4∘00′00′′, D = 3∘00′00′′ is used to find R, T, PC, PT, and LC by arc definition. Radius R is given by the formula, R = (Delta/2π) x (D + 100 ft/2)Where Delta is the central angle and D is the degree of curve in a chord of 100 feet.

Putting the given values of Delta and D into the formula, we have; R = (4/360 x 2π) x (3 + 100/2)R = 25.67 ft The tangent distance T is given by the formula, T = R x tan (Delta/2)Where Delta is the central angle. Putting the given value of Delta into the formula, we have;

T[tex]= 25.67 x tan (4/2)T = 9.72 ft[/tex]The external distance X is given by the formula, X = R x sec (Delta/2) - R Where Delta is the central angle.

Putting the calculated value of R into the formula, we have; D = [tex]5729.58/25.67D = 223.10 ft[/tex]

To know more about curve visit:

https://brainly.com/question/32496411

#SPJ11

Conceptualize (for a research proposal) an application
of hydrographic survey for laguna de bay,philippines

Answers

The application of hydrographic survey for Laguna de Bay would provide valuable information for managing the lake’s resources and protecting its environment. The proposed research would involve the collection of data using various hydrographic survey techniques, and the creation of detailed maps of the lakebed and its features.

Hydrographic survey is the process of collecting data on water depth, topography, and features to create maps and charts for navigational purposes. An application of hydrographic survey for Laguna de Bay in the Philippines would provide valuable information for the management of the lake’s resources and protection of the environment.

Laguna de Bay is the largest lake in the Philippines and a major source of freshwater for the surrounding communities. However, the lake is facing numerous environmental challenges such as pollution, overfishing, and encroachment. A hydrographic survey would be a useful tool for assessing the health of the lake, identifying areas in need of restoration or protection, and supporting sustainable use of the lake’s resources.

The hydrographic survey of Laguna de Bay could be conducted using various technologies such as sonar, radar, and lidar. The collected data could then be used to create detailed maps of the lakebed, including its contours, depth, and submerged features.

This information would be valuable for identifying areas of concern such as shallow waters, hazardous areas, or areas where water quality is poor.

In conclusion, the application of hydrographic survey for Laguna de Bay would provide valuable information for managing the lake’s resources and protecting its environment. The proposed research would involve the collection of data using various hydrographic survey techniques, and the creation of detailed maps of the lakebed and its features.

The research would benefit the surrounding communities by supporting sustainable use of the lake’s resources while promoting its long-term protection. This research proposal would benefit from further elaboration and a more detailed methodology, but these are the essential elements that could be included in a proposal.

To know more about hydrographic survey, visit:

https://brainly.com/question/33164603

#SPJ11

Q3 - Gandalf, Thranduil, Thorin, Rhosgobel and Azog love riding their favorite animals that are, respectively, White Horse, Great Elk, Bighorn Sheep, Giant rabbits and Warg Matriarch. How many pairs can there be between the five characters and the five animals listed above, that are described in "The Hobbit" and "Lord of the Rings", If only two of the above personals got their favorite animals while the remaining three got animals they do not really prefer? a) 5 b) 10 c) 20 d) 40 e) 8011 Q4 - We have four different dishes, two dishes of each type. In how many ways can these be distributed among 8 people? a) 1260 b) 2520 c) 5040 d) 10080 e) 645120

Answers

There can be 1200 pairs between the five characters and the five animals listed above.

There are 201, 600 ways to distribute the four dishes among 8 people.

When only two of the characters got their favorite animals, and the remaining three got the animals they do not really prefer, the number of pairs that can be formed will be:C(5, 2) × C(3, 3) × P(5, 5) = 10 × 1 × 120 = 1200

Therefore, there can be 1200 pairs between the five characters and the five animals listed above.

There are 4 different dishes and 2 dishes of each type.

Therefore, there are 4!/2!2! = 6 ways of choosing two distinct dishes of each type.

Since there are 8 people, one can distribute the dishes in P(8, 2)P(6, 2)P(4, 2)P(2, 2) = 201, 600 ways.

To know more about characters  visit:

https://brainly.com/question/17812450

#SPJ11

a. Explain the different components of a water supply system Also, draw the sequential diagram of components.

Answers

A water supply system consists of several components that work together to ensure the availability and distribution of clean water to users. The key components of a typical water supply system include:

1. Source: The source is the origin of water, such as rivers, lakes, or underground aquifers. It is where water is extracted for further treatment and distribution.

2. Treatment: Once water is extracted, it undergoes various treatment processes to remove impurities and make it safe for consumption. Treatment may include processes like sedimentation, filtration, disinfection, and chemical treatment.

3. Storage: Treated water is then stored in reservoirs or tanks to ensure a continuous supply, especially during times of high demand or when there is a disruption in the source.

4. Distribution: The distribution network consists of pipes, pumps, and valves that transport water from storage facilities to individual consumers. The network is designed to maintain adequate pressure and flow rates throughout the system.

5. Metering: Water meters are installed at consumer points to measure the amount of water used, enabling accurate billing and monitoring of consumption.

6. Consumer Connections: These are the individual connections that provide water to households, businesses, and other users. Each connection is equipped with faucets, valves, and other fittings to control the flow of water.

In a sequential diagram, the water supply system would be represented with arrows indicating the flow of water from the source to the treatment facility, then to storage, distribution, metering, and finally to consumer connections. Each component would be labeled accordingly to indicate its function.

Overall, the components of a water supply system work together to ensure the provision of clean, safe water to meet the needs of a community or region. This system plays a crucial role in maintaining public health and supporting various activities like domestic use, irrigation, and industrial processes.

Learn more about flow rates from the link:

https://brainly.com/question/31070366

#SPJ11

How many years will it take to earn 8100 simple interest on 180000 at 9% per annum

Answers

It will take 0.5 years (or 6 months) to earn 8,100 in simple interest on an amount of 180,000 at an interest rate of 9% per annum.

To calculate the number of years required to earn a specific amount of simple interest, we use the formula:

Interest = Principal * Rate * Time

In this case, the principal (P) is 180,000, the rate (R) is 9% (or 0.09), and the interest (I) is 8,100. We need to find the time (T), which represents the number of years.

By substituting the given values into the formula, we have:

8,100 = 180,000 * 0.09 * T

To solve for T, we can simplify the equation:

8,100 = 16,200 * T

Now, we can isolate T by dividing both sides of the equation by 16,200:

T = 8,100 / 16,200

Performing the division, we find:

T = 0.5

Therefore, it will take 0.5 years, which is equivalent to 6 months, to earn 8,100 in simple interest on a principal amount of 180,000 at an interest rate of 9% per annum.

Learn more about simple interest here:-

https://brainly.com/question/8100492

#SPJ11

Given U(1,-9), V(5,7), W(-8,-1),U(1,−9),V(5,7),W(−8,−1), and X(x, 7).X(x,7). Find xx such that UV∥ WX.

Answers

Answer:

  x = -6

Step-by-step explanation:

You want the x-coordinate of point X(x, 7) such that line WX is parallel to line UV when the points are U(1, -9), V(5, 7), W(-8, -1).

Graph

It works fairly nicely to graph the given points. This lets you see that line UV has a rise/run of 4/1. You can find the desired point by drawing a line through W with the same slope. It crosses the horizontal line y=7 at x = -6.

The point of interest is X(-6, 7), where x = -6.

Equations

The slope of UV is ...

  m = (y2 -y1)/(x2 -x1)

  m = (7 -(-9))/(5 -1) = 16/4 = 4

Then the point-slope equation of the line through W is ...

  y -k = m(x -h) . . . . . . line with slope m through point (h, k)

  y -(-1) = 4(x -(-8)

Solving for x gives ...

  (y +1)/4 -8 = x

  (7 +1)/4 -8 = x = -6 . . . . . . . for point (x, 7)

The x-coordinate of point X is -6.

<95141404393>

Global Build (GB), a reputable Indian investor, has intended to develop a 38-storey high deluxe residential and commercial building in Kai Tak District. Jerry Will, a Business Manager of GB, has been

Answers

As Jerry Will, the Business Manager of Global Build (GB) has been assigned the project of constructing a 38-storey high deluxe residential and commercial building in Kai Tak District, he should come up with a suitable plan to execute the project.

Jerry Will has been assigned the project of constructing a 38-storey high deluxe residential and commercial building in Kai Tak District by Global Build (GB). Jerry Will should come up with a suitable plan to execute the project since he is the Business Manager of the GB.

Jerry Will will have to handle several tasks to accomplish the project. These tasks may include, but are not limited to, managing the project finances, coordinating with contractors, ordering building materials, arranging the paperwork, ensuring worker safety and environmental compliance.

Jerry Will must also consider other aspects, such as the government's construction standards, neighborhood property values, and traffic and public transportation patterns in the area where the project is to be completed. These factors must all be taken into account while creating the project plan.

Learn more about commercial building: https://brainly.com/question/31665516

#SPJ11

Find the points on the graph of y = x² + 3x + 1 at which the slope of the tangent line is equal to 6 Point(s) help (points)

Answers

The points on the graph of y = x² + 3x + 1 at which the slope of the tangent line is equal to 6 are (-2, -3) and (-4, 9).

To find the points, we need to differentiate the given equation to find the derivative, which represents the slope of the tangent line. Taking the derivative of y = x² + 3x + 1 with respect to x, we get dy/dx = 2x + 3.

Setting dy/dx equal to 6, we have 2x + 3 = 6. Solving this equation gives x = 1. Substituting this value back into the original equation, we find y = 1² + 3(1) + 1 = 5. So, the point (1, 5) has a slope of the tangent line equal to 6.

Similarly, for dy/dx = 6, solving 2x + 3 = 6 gives x = 3/2. Substituting this value into the original equation, we find y = (3/2)² + 3(3/2) + 1 = 9/4 + 9/2 + 1 = 31/4. Thus, the point (3/2, 31/4) has a slope of the tangent line equal to 6.

Therefore, the points on the graph where the slope of the tangent line is 6 are (-2, -3) and (-4, 9), in addition to (1, 5) and (3/2, 31/4).

Learn more about tangent line here: brainly.com/question/31617205

#SPJ11

is this correct please lmk​

Answers

Answer:

8.9

Step-by-step explanation:

By pythagoras theorem, a² + b² = c²

8² + 4² = c²

64 + 16 = c²

c² = 80

c = √80

c = 8.9

Answer:

√80

Step-by-step explanation:

To find the sides of a right triangle, note that we can use the Pythagorean Theorem ---> a² + b² = c² where a and b are the legs and c is the hypotenuse of the triangle. We are already given the measurements of both legs and are asked to find the hypotenuse, so, plug in the known values into the Pythagorean Theorem and solve for c:

4² + 8² = c²

16 + 64 = c²

80 = c²

√80 = c

In a mass transfer apparatus operating at 1 atm the individual mass transfer coefficients are given by kx = 22 kmol/m².h and ky = 1.07 kmol/m2.h. If the equilibrium compositions of the gaseous and liquid phases are characterized by Henry's law, PA=0.08 x 105 xa mm of Hg. determine the ratio of overall liquid phase resistance to the overall gas phase resistance.

Answers

The ratio of overall liquid phase resistance to overall gas phase resistance is found to be 16.9.

The mass transfer apparatus operates at 1 atm and has individual mass transfer coefficients of kₓ = 22 kmol/m²·h (for the gas phase) and kᵧ = 1.07 kmol/m²·h (for the liquid phase).

The equilibrium compositions of the gaseous and liquid phases are described by Henry's law as Pₐ = 0.08 x 10⁵ xₐ mm of Hg.

To determine the ratio of overall liquid phase resistance to overall gas phase resistance, we can use the concept of overall mass transfer coefficient (K). K is given by the equation K = 1 / (1/kᵧ + 1/kₓ).

Substituting the given values, we get K = 1 / (1/1.07 + 1/22)

                                                                  = 0.942 kmol/m²·h.

Now, the overall liquid phase resistance (Rₗ) and overall gas phase resistance (R₉) can be calculated using

Rₗ = 1 / (K · kᵧ) and R₉ = 1 / (K · kₓ), respectively.

Rₗ = 1 / (0.942 · 1.07)

   = 0.879 m²·kmol/h

R₉ = 1 / (0.942 · 22)

    = 0.052 m²·kmol/h.

Therefore, the ratio of overall liquid phase resistance to overall gas phase resistance is

Rₗ/R₉ = 0.879 / 0.052

        = 16.9.

Learn more About resistance from the given link

https://brainly.com/question/28135236

#SPJ11

Other Questions
A new light rail train can accelerate at 4.27 ft/sec and can decelerate at 4.59 ft/sec. Its top speed is 50.0 mph. 1. How much time does it take the train to reach its top speed when starting from a stopped position at a station? 2. How many feet does it take the train to reach its top speed? In order for a police officer to stop and frisk ("pat down") a person for weapons, he or she must have reasonable suspicion. The officer must be able to articulate on why he or she detained a person and frisked them. Here's a scenario to consider:It's a very HOT summer day in Los Angeles. You are on patrol and notice a man walking back and forth in front of a bank. He appears to be constantly looking from side to side. The man is wearing a thick fur-type overcoat jacket, unlike all the other pedestrians.Can you approach the man and "stop and frisk" him for weapons? Please cite the case law within the Chapter that answers this question. Use your key Case Law Handout for reference. Please explain your answer. a. Write a matlab code to design a chirp signal x(n) which has frequency, 700 Hz at 0 seconds and reaches 1.5kHz by end of 10th second. Assume sampling frequency of 8kHz. b. Design an IIR filter to have a notch at 1kHz using fdatool.c. Plot the spectrum of signal before and after filtering on a scale - to . Observe the plot and comment on the range of peaks from the plot. d. Critically analyze the design specification. e. Demonstrate the working of filter by producing sound before and after filtering using necessary functions. Robin Hood famously broke the rules so he could steal from the rich and give to the poor, because he felt the laws were unjustly applied to the common people. Robin Hood is operating at what level of morality? Preconventional Conventional Superventional Postconventional o Hello, please help me answer the following questions separate from each other:1. Define the term 'service culture':2. What does "service culture" mean to a company?3. what does "service culture" mean to the employees?4. what does "service culture" mean to the customers?5. Does it mean the same to all or something different? Please Explain your answer.6. What company do you feel has a service culture that is communicated and demonstrated well to their customers? Except for a minimal use of direct quotes, the review paper should contain your understanding of, as well as your thoughts about, the peer-reviewed article. - Introduce the research conducted by the author(s) - Present the major idea(s) discussed in the article - Summarize the data presented in the article - Discuss the conclusion of the author(s) - Explain the impact the article, as well as its conclusions, may have had (will have) on the field of Internet programming Rosa Parks, MLK, and the Civil Rights movement based in the southern black churches were successful in terms of moving the courts to act and were instrumental in helping LBJ succeed in passing the Civil Rights and Voting Rights Acts. Malcom X and others in the mid-to-late 1960s had a different approach. Compare/Contrast and discuss. python-11.26 3-D point classFor this lab you will create a custom class that implements a point in 3-D space. Name your class 'pt3d'.The class will have three attributes, x,y,z. These x,y,z values should default to zero.Given two instances of the pt3d class a and b, implement methods such that:a+b returns a new pt3d object whose x, y and z values are the sum of the a and b x, y and z values a-b returns the Euclidean distance between points a and ba==b returns true if the x, y and z values of a and b are equal, false otherwiseWhen you call print(a) the printout should be of the format ''You can test and develop your class either from the main block in your program, from another module, or using the python interpreter directly:>>> from pt3d import pt3d>>> p1=pt3d(1,1,1)>>> p2=pt3d(2,2,2)>>> print(p1+p2)>>> print(p1-p2)1.7320508075688772>>> p1==p2False>>> p1+p1==p2True>>> p1==p2+pt3d(-1,-1,-1)True QUESTION 21 Which of the ideas on change are incorrect? O Regardless of where you work, you will experience change. O Expect yourself suddenly to be using new equipment, using new software, or experiencing several new job assignments during your career. Welcome change and view it positively. O None of the above. Which letter is written by an applicant who does not know that a job opening exists? O Soliciting. O Prospecting. Scanning. None of the above. QUESTION 23 Which letter is written by an applicant who includes only the position requirements his or her qualifications meet or exceed? OSoliciting. OProspecting. OQualifications. ONone of the above. QUESTION 24 The curriculum vitae is best described as O An international-style resume used for overseas job hunting. An international-style resume that is widely accepted in the U.S. as well as overseas. O An international-style resume that doesn't need to accompany a cover letter. O An international-style resume that varies in format. QUESTION 25 Which of the following statements is not true? O Searching the Web for employment opportunities will not eliminate the need to practice traditional job-hunting techniques. O Searching the Web for employment opportunities is easier and will eliminate the need to practice traditional job- hunting techniques. O Web job announcement databases are available for browsing. The Web may be used for job searching, but it is also useful for sending your resume to one of the online career services. Drag the tiles to the correct boxes to complete the pairs. Identify the type of chemical reaction that is described. 9.Fred Meyer has cheddar cheese priced at $6.50 for 3 pounds. Costco has 10 pounds of cheddar cheese for $21. Who has the better price? Fred Meyer's unit Rate: Costco's unit Rate: Better Price: Consider a flat (horizontal) curved road with radius of curvature 57 m. There is a speed caution sign for 30mph(14 m/s). Discuss the following topics. Be sure to include terms about centripetal acceleration, centripetal force, and/or fricicion force in your explanations. Which is more dangerous, taking the turn too slow or too fast? Explain. How does wet road conditions affect the safety of driving the curve? (Can you drive faster than usual, do you need to drive slower than usual, or does it have no effect?) Explain. Why do city engineers sometimes make curved roads banked at an angle? How does an angled road around a curve differ from a flat curved road? Discuss in what ways "sex" and "gender" refer to similar and yetdifferent phenomena. (250 word) Write a Python program to solve the following problem. Your solution should include a readme.md file (which includes details of how to run your assignment) and your Python program in a file named clean.py, and be submitted as a single .tgz file named pt3.tgz. You should ensure your solution works using the Python 3 interpreter on turing. Problem After adding additional busses to the routes you suggested, Codetown council is getting far fewer complaints about people missing their bus. However, complaints about the cleanliness of the busses are an issue Codetown's mayor would now like to address. The mayor's plan is to add a touchscreen device, running a program you develop, to each bus so passengers can indicate the current cleanliness. Your program must provide a graphical user interface that prompts users to enter a rating for the current cleanliness of the bus. The user should be able to choose an integer value between 1 and 5. Once at least one rating has been entered, the system should display the average rating given for the bus. Note: The specifications for this assignment are deliberately very brief. If anything is unclear, please use the discussion forums to clarify anything you are unsure of. Program specifications are often incomplete, and it is a useful skill to be able to elicit actual requirements. he acid-ditsociation constant for chlorous acid Part A (HClO2) is 1.110^-2 Calculate the concentration of H3O+at equilibrium it the initial concentration of HClO2 is 1.9010^2 M Express the molarity to three significant digits. Part B Calculate the concentration of ClO2 at equesbrium if the initial concentration of HClO2 is 1.9010^2M. Express the molarity to three significant digits. Part C Calculate the concentration of HClO2 at equillorium if the initial concentration of HClO2 is 1.9010^2M. Express the molarity to three significant digits. The plane of incidence is always parallel to the boundary. O True O False Q2-Calculate sample size using the following formula and values (Point = 4). (Z-score)2 x StdDev x (1-Std Dev) Necessary Sample Size (margin of error)2 Two-tailed alpha=0.05 SD = .25 Margin of error = write a body about the problem/causes of outdoor airpollution.please include the reference Given F(s) = 1/((s+1)(s+3+j2)(s+3-j2)), the f(t) would be: O A. None of the choices are correct O B. Exponentially increasing O C. exponentially increasing sinusoid O D. Sinusoidal O E. Exponentially decaying sinusoid Prior to recording the following, E. Perry Electronics, Incorporated, had a credit balance of $4,700 in its Allowance for Doubtful Accounts. Required: Prepare journal entries for each transaction. (If no entry is required for a transaction/event, select "No journal entry required" in the first account field.) 1. On August 31, a customer balance for $615 from a prior year was determined to be uncollectible and was written off. View transaction list Journal entry worksheet > On August 31, a customer balance for $615 from a prior year was determined to be uncollectible and was written off. Note: Enter debits before credits. Transaction General Journal Debit Credit Record entry Clear entry View general journal 2. On December 15, the customer balance for $615 written off on August 31 was collected in full. View transaction list Journal entry worksheet A B > Record the reversal of write-off. Note: Enter debits before credits. Transaction Debit 2a. Record entry General Journal Clear entry Credit View general Journal