Water in coal-fired power stations is used for cooling, steam generation, and pollution control, including capturing sulfur dioxide and cooling exhaust gases. Efficient water recycling helps minimize environmental impact.
Water plays a critical role in coal-fired power stations. The power stations need large quantities of water for a variety of purposes. Water is primarily used to cool the power plant, maintain a safe temperature in the boilers, and also to generate steam. In this context, this answer will discuss three significant uses of water in coal-fired power stations. Significant uses of water in coal-fired power stations1. Cooling: Power stations require water for cooling purposes. When water is used for cooling, it absorbs the heat produced by the combustion process. Cooling towers are responsible for releasing the heated water, which is then reused.2. Steam generation: Water is required to generate steam, which is used to rotate turbines and generate electricity. The water used to generate steam must be treated to prevent the accumulation of harmful minerals, which can damage the power plant.3. Pollution control: Water is utilized to reduce air pollution. Flue gas desulfurization systems utilize water to capture sulfur dioxide from power plants. Water is also used to cool exhaust gases that are produced during combustion.In conclusion, the three significant uses of water in coal-fired power stations include cooling, steam generation, and pollution control. These processes require large amounts of water, which is why coal-fired power stations are often located near water sources. By recycling water, power stations can conserve water and minimize their environmental impact.For more questions on pollution control
https://brainly.com/question/16452378
#SPJ8
The atom spectrum have a wavelength in 1212.7 A and 6562.8 A. These two lines result from transition in different series, one with nr 1 & the other with n-2. Identify n, for each line.
The wavelength of 1212.7 Å corresponds to an electronic transition from n=1 to n=2, while the wavelength of 6562.8 Å does not have enough information to determine the value of n.
In atomic spectra, the wavelength of spectral lines corresponds to specific electronic transitions within an atom. Each line is associated with a particular energy level transition, which is characterized by the principal quantum number (n) of the electronic orbitals involved.
Let's analyze the given wavelengths:
Wavelength of 1212.7 Å: This wavelength corresponds to a transition involving the principal quantum numbers n and n-2. We need to find the values of n for this transition.
We know that the Balmer series in the hydrogen atom is defined by transitions from higher energy levels to the n=2 level. Therefore, the wavelength of 1212.7 Å corresponds to an electronic transition within the Balmer series. From the Balmer series formula,
1/λ = R_H * [tex](1/2^2 - 1/n^2[/tex]), where R_H is the Rydberg constant for hydrogen, we can solve for n. Rearranging the formula, we get:
1/λ = R_H * (1/4 - 1/[tex]n^2[/tex])
1/λ = R_H/n^2 - R_H/4
1/λ + R_H/4 = R_H[tex]/n^2[/tex]
1/λ + 109677 cm^-1 = 109677 cm^-1/n^2
Substituting the value of the wavelength (1212.7 Å = 121270 nm = 12127000 Å) into the equation, we can solve for n:
1/12127000 + 109677 cm^-1 = 109677 cm^-1/n^2
[tex]n^2[/tex] = 109677 cm^-1 / (1/12127000 + 109677 cm^-1)
[tex]n^2[/tex]≈ 109677 cm^-1 / 109678 cm^-1
n ≈ sqrt(1) ≈ 1
Therefore, the electronic transition corresponding to the wavelength of 1212.7 Å is from n=1 to n=2.
Wavelength of 6562.8 Å: This wavelength corresponds to a transition involving the principal quantum numbers n and n-2. To determine the value of n for this transition, we can use a similar approach as before. However, since the wavelength is not specified further, we cannot determine the exact series or atom.
Different atoms or series can have transitions that produce the same wavelength. Without additional information, we cannot pinpoint the specific value of n for this wavelength.
For more such questions on wavelength visit:
https://brainly.com/question/28995449
#SPJ8
Calculate the Standard Free Energy Change at 25℃ given the Equilibrium constant of 1.3 × 104.
The standard free energy change at 25℃ is -2.48 × 10⁴ J/mol.
The equation linking Gibbs free energy change and equilibrium constant is given by the following equation:
ΔG° = -RT ln K(where, ΔG° is the standard free energy change, R is the gas constant, T is the temperature in Kelvin and K is the equilibrium constant)
Substituting the given values:Equilibrium constant, K = 1.3 × 10⁴
Standard temperature, T = 25℃ = 298K
Substituting the values in the equation of Gibbs free energy change:
ΔG° = -RT ln K=-8.31 J K⁻¹ mol⁻¹ × 298 K × ln 1.3 × 10⁴
= -8.31 J K⁻¹ mol⁻¹ × 298 K × 9.480
= -2.48 × 10⁴ J/mol (Approx)
Therefore, the standard free energy change at 25℃ is -2.48 × 10⁴ J/mol.
Know more about equilibrium here:
https://brainly.com/question/18849238
#SPJ8
6) A gas that has a volume of 33 liters, a temperature of 24 °C, and an unknown pressure has its
volume increased to 41,000 milIILiters and its temperature decreased to 13 °C. When the
pressure was measured after the change it was determined to be 2.7atm, what was the original
pressure?
The original pressure[P₁] is approximately 0.0848 atm
We can use the combined gas law equation, which relates the initial and final conditions of a gas sample. The combined gas law equation is as follows:
(P₁ × V₁) / (T₁) = (P₂ × V₂) / (T₂)
Given:
V₁ = 33 liters
T₁ = 24 °C = 24 + 273.15 = 297.15 K (converted to Kelvin)
V₂ = 41,000 milliliters = 41 liters (converted to liters)
T₂ = 13 °C = 13 + 273.15 = 286.15 K (converted to Kelvin)
P₂ = 2.7 atm
We need to find P₁, the original pressure.
Plugging in the values into the combined gas law equation:
(P₁ × 33) / (297.15) = (2.7 × 41) / (286.15)
Simplifying the equation:
33P₁ = (2.7 × 41 × 297.15) / (286.15)
33P₁ ≈ 2.804
Dividing both sides by 33:
P₁ ≈ 2.804 / 33
P₁ ≈ 0.0848 atm
To know more about Gas Law Equation refer to this link
https://brainly.com/question/25736513
Acetic acid has the molecular formula CH3COOH. How many atoms of oxygen are there in 60 grams of acetic acid?
There are approximately 1.203 × 10^24 atoms of oxygen in 60 grams of acetic acid.
To determine the number of atoms of oxygen in 60 grams of acetic acid (CH3COOH), we need to consider the molar mass and the molecular formula of acetic acid.
The molar mass of acetic acid can be calculated by summing the atomic masses of each element in its molecular formula. The atomic masses of carbon (C), hydrogen (H), and oxygen (O) are approximately 12.01 g/mol, 1.01 g/mol, and 16.00 g/mol, respectively.
Molar mass of CH3COOH = (1 × 12.01 g/mol) + (4 × 1.01 g/mol) + (2 × 16.00 g/mol) + 1.01 g/mol
= 60.05 g/mol
Now, we can calculate the number of moles of acetic acid in 60 grams using the molar mass:
Number of moles = Mass / Molar mass
= 60 g / 60.05 g/mol
≈ 0.999 moles
From the molecular formula of acetic acid, we can see that there are two atoms of oxygen in each molecule.
Therefore, the number of atoms of oxygen in 60 grams of acetic acid can be calculated by multiplying the number of moles by the Avogadro's number, which represents the number of particles (atoms, molecules, or ions) in one mole of a substance. Avogadro's number is approximately 6.022 × 10^23 particles/mol.
Number of atoms of oxygen = Number of moles × Avogadro's number × Number of oxygen atoms in one molecule
= 0.999 moles × 6.022 × 10^23 particles/mol × 2
≈ 1.203 × 10^24 atoms
For more such questions on acetic acid. visit:
https://brainly.com/question/15231908
#SPJ8
5 organic functional groups similar to morphine and cannabinol
8) After school, you stop into Speedway to get a fountain drink. When you push on the lever to
expel your soda pop, it just drips out. The manager tells you that his fountain machine is set at
12°C for 450 mL of pop at an unknown pressure. Being a curious chemistry student, you decide
to investigate: Fountain drinks should be an average temperature of 5°C for 355mL at a pressure
of 7psl. What pressure does the manager have his pop machine set at in both psi & atm?
The pressure (P) of the manager's pop machine is 0.38 psi or 0.026 atm.
Given the following values:
Temperature (T) = 12 °C
Volume (V) = 450 mL = 0.45 L
Pressure (P) = UnknownTemperature (T) = 5 °C
Volume (V) = 355 mL = 0.355 L
Pressure (P) = 7 psi = 0.48 atm
To find the pressure (P) of the manager's pop machine in both psi and atm, we can use the Ideal Gas Law, which is given by: PV = nRT
Where:
P = Pressure V = Volume T = Temperature n = Number of moles R = Universal gas constant
Let's first convert the volume and temperature to SI units.
Volume (V) = 0.45 L
Temperature (T) = 12 + 273 = 285 K
For the first condition, we have: P1V1/T1 = nR/P1V1/T1 = P2V2/T2 (At constant temperature and volume)
P2 = P1(V2/V1)
For the second condition, we have: P1V1/T1 = P2V2/T2P2 = (P1V1T2)/(V2T1)
Now, let's plug in the values.P1 = ?V1 = 0.45 LT1 = 285 KP2 = 7 psi = 0.48 atmV2 = 0.355 LT2 = 278 K (5°C + 273)
First, we'll find the pressure (P) in psi. P2 = P1(V2/V1)0.48 = P1(0.355/0.45)P1 = 0.38 psi
To convert psi to atm, we use the following conversion factor: 1 atm = 14.7 psi0.38 psi x (1 atm/14.7 psi) = 0.026 atm.
for such more questions on pressure
https://brainly.com/question/24719118
#SPJ8
write the structural formula for 6-Ethyl-4, 7-dimethyl-non-1-ene.
The structural formula for 6-Ethyl-4,7-dimethyl-non-1-ene can be represented as follows:
[tex]CH_{3} CH_{3} CH_{3}[/tex]
| | |
[tex]CH_{2} CH_{2} CH_{2} CH_{2} CH_{2} CH_{2} CH_{2} CH_{2} CH_{2} CH_{3}[/tex]
| | | | | | |
[tex]CH CH CH CH CH CH CH[/tex]
|
[tex]CH_{2}[/tex]
In this structural formula, the main chain contains nine carbon atoms (non-1-ene) with a double bond (ene) located at the first carbon atom. Starting from the first carbon atom, we have:
At the sixth carbon atom, there is an ethyl group (CH3CH2-), which means an ethyl group is attached to it.
At the fourth and seventh carbon atoms, there are methyl groups (CH3-), which means a methyl group is attached to each of them.
The remaining carbon atoms in the main chain have a single hydrogen atom (H) attached to them.
This structural formula represents the arrangement of atoms and bonds in the molecule and provides information about the connectivity of the atoms in the compound. It helps visualize the spatial arrangement of the atoms and functional groups, enabling a better understanding of the compound's chemical properties and reactions.
Know more about structural formula here:
https://brainly.com/question/31115811
#SPJ8
what is the equivalent resistance of this circuit
Answer: 100 ohms.
Explanation:
The circuit is composed of two parallel branches (upper and lower), with one resistor in the upper branch (150) and two resistors in the lower branch (250 and 50).
The lower branch resistors are in series, so the lower branch's resistance is:
250 + 50 = 300.
Now, the upper branch (150) and total lower branch (300) are in parallel, so:
[tex]\frac{1}{R} = \frac{1}{150} + \frac{1}{300}[/tex]
That is,
[tex]\frac{1}{R} = \frac{3}{300} = \frac{1}{100}[/tex],
Solving for R, we find R = 100.
The equivalent resistance of this circuit is 100 ohms.
What does the latent heat of fusion measure?
• A. The energy required to melt a substance
B. The energy required to boil a substance
• c. The energy required to heat a substance
• D. The energy required to form a substance
The latent heat of fusion measures " The energy required to melt a substance" option (A).
The latent heat of fusion refers to the amount of energy required to change a substance from a solid state to a liquid state at its melting point while keeping the temperature constant. It is a specific type of latent heat that measures the energy needed for the phase transition of a substance.
When a substance is in a solid state, its particles are tightly packed and have a regular arrangement. As heat is added to the substance, its temperature gradually rises until it reaches the melting point. At this point, further addition of heat does not increase the temperature but instead causes the substance to undergo a phase change and transform into a liquid state. The energy absorbed during this process is known as the latent heat of fusion.
This energy is used to overcome the attractive forces between the particles in the solid and allow them to break free and move more freely in the liquid state. The latent heat of fusion is crucial in various practical applications, such as melting ice, changing solid metals into liquid form for casting, or utilizing phase change materials for thermal energy storage.
For more questions on latent heat, click on:
https://brainly.com/question/30430924
#SPJ8
Hydrated copper(II) Sulfate was heated: what would be the ice for?
The ice is used to regulate and control the temperature during the dehydration of [tex]hydrated copper(II) sulfate[/tex], ensuring a safer and more controlled process.
When [tex]hydrated copper(II) sulfate[/tex] [tex](CuSO_ {4} .H_{4} O)[/tex] is heated, the purpose of the ice is to provide a cooling effect during the process. The hydrated copper(II) sulfate contains water molecules (H2O) that are chemically bonded to the copper sulfate compound. The formula [tex]CuSO_{4} .H_{2} O[/tex] indicates that there are x moles of water molecules per mole of copper(II) sulfate.
As the [tex]hydrated copper(II) sulfate[/tex] is heated, the heat energy causes the water molecules to undergo a physical change and turn into steam. This process is known as dehydration. The water molecules break their chemical bonds with the copper sulfate compound and are released in the form of steam.
The presence of ice during the heating process helps maintain a lower temperature in the reaction vessel. The ice absorbs the heat energy from the surroundings, allowing for a controlled and gradual increase in temperature. This controlled heating prevents sudden temperature changes and potential hazards, such as splattering or overheating.
In summary, the ice is used to regulate and control the temperature during the dehydration of [tex]hydrated copper(II) sulfate[/tex], ensuring a safer and more controlled process.
For more questions on dehydration, click on:
https://brainly.com/question/1301665
#SPJ8
Which of the following types of radiation can penetrate the most deeply into your body? (2 points)
Alpha rays
Beta rays
Gamma rays
Proton rays
Explain the effect of Global Warming on land and sea breeze.
If the pH of a solution is 4.5 and the other pH of another solution is 7.9, what are the solutions for pH, pOH, [H+], and [OH-]?
For the solution with a pH of 7.9:
pH = 7.9
pOH = 14 - pH = 14 - 7.9 = 6.1
[H+] = 10^(-pH) = 10^(-7.9) (in mol/L)
[OH-] = 10^(-pOH) = 10^(-6.1) (in mol/L)
The pH of a solution is a measure of its acidity, while pOH is a measure of its alkalinity. The pH and pOH values are related through the equation pH + pOH = 14.
For the solution with a pH of 4.5:
pH = 4.5
pOH = 14 - pH = 14 - 4.5 = 9.5
[H+] = 10^(-pH) = 10^(-4.5) (in mol/L)
[OH-] = 10^(-pOH) = 10^(-9.5) (in mol/L)
For the solution with a pH of 7.9:
pH = 7.9
pOH = 14 - pH = 14 - 7.9 = 6.1
[H+] = 10^(-pH) = 10^(-7.9) (in mol/L)
[OH-] = 10^(-pOH) = 10^(-6.1) (in mol/L)
Note: The [H+] and [OH-] concentrations can also be calculated using the equation [H+][OH-] = 1 x 10^(-14) at 25°C.
For more questions on alkalinity, click on:
https://brainly.com/question/867708
#SPJ8
A scientist wants to make advances in the way skin cancer patients are
treated. What is something she should do first?
To make advances in the way skin cancer patients are treated, a scientist should first conduct thorough research and gather relevant information.
Review existing literature: The scientist should study the current scientific literature on skin cancer treatment, including the latest research, clinical trials, and treatment options. This will provide a foundation of knowledge and help identify gaps or areas that need improvement.
Understand the current challenges: It is important for the scientist to have a comprehensive understanding of the challenges faced by skin cancer patients and healthcare providers in existing treatment methods. This can involve analyzing the limitations of current therapies, side effects, recurrence rates, and patient outcomes.
Identify unmet needs: Through research and engagement with dermatologists, oncologists, and patients, the scientist should identify specific unmet needs in skin cancer treatment. This can include areas such as early detection methods, personalized therapies, targeted drug delivery, or improving the effectiveness of existing treatments.
Collaborate with multidisciplinary teams: Skin cancer treatment often requires collaboration between various specialists, including dermatologists, oncologists, surgeons, and researchers. The scientist should establish collaborations with experts from different disciplines to gain diverse perspectives and insights.
Conduct preclinical and clinical research: Once the specific objectives are identified, the scientist should design and conduct preclinical studies to explore potential treatment approaches. This can involve laboratory experiments, animal models, and in vitro studies.
Evaluate safety and efficacy: During clinical trials, the scientist should rigorously evaluate the safety and efficacy of the new treatment approach. This includes monitoring patient responses, side effects, and overall outcomes.
Analyze and disseminate results: The scientist should carefully analyze the data collected during the research and communicate the findings through scientific publications, conferences, and collaborations.
For more such questions on scientist visit:
https://brainly.com/question/29886197
#SPJ8
What is the molar mass of N2CO3
Answer:105.99 g/mol
Explanation:
Sodium carbonate is the inorganic compound with the formula Na₂CO₃ and its various hydrates. All forms are white, odourless, water-soluble salts that yield alkaline solutions in water.
The composition of a compound is 28.73% K, 1.48% H, 22.76% P, and 47.03% O. The molar mass of the
compound is 136.1 g/mol.
I
The compound has an empirical formula of [tex]K_2H_2P_2O_8[/tex] and a molecular formula of [tex]K_2HPO_4[/tex].
The given compound has a percent composition of K = 28.73%, H = 1.48%, P = 22.76%, and O = 47.03%. Its molar mass is 136.1 g/mol. To determine its molecular formula, we need to find its empirical formula and calculate its molecular formula from its empirical formula.The empirical formula is the smallest whole number ratio of atoms in a compound. It can be determined by converting the percent composition of the elements into their respective moles and dividing each by the smallest number of moles calculated. The moles of K, H, P, and O in 100 g of the compound are: K = 28.73 g x (1 mol/39.1 g) = 0.734 molH = 1.48 g x (1 mol/1.01 g) = 1.46 molP = 22.76 g x (1 mol/30.97 g) = 0.736 molO = 47.03 g x (1 mol/16.00 g) = 2.94 molDividing each by the smallest number of moles gives the following ratios: K = 0.734/0.734 = 1H = 1.46/0.734 = 2P = 0.736/0.734 = 1.002O = 2.94/0.734 = 4. The empirical formula of the compound is [tex]K_2H_2P_2O_8[/tex]. To calculate the molecular formula, we need to determine the factor by which the empirical formula should be multiplied to obtain the molecular formula. This can be done by comparing the molar mass of the empirical formula to the molar mass of the compound.The molar mass of [tex]K_2H_2P_2O_8[/tex] is: [tex]M(K_2H_2P_2O_8)[/tex] = (2 x 39.1 g/mol) + (2 x 1.01 g/mol) + (2 x 30.97 g/mol) + (8 x 16.00 g/mol) = 276.2 g/mol. The factor by which the empirical formula should be multiplied is: M(molecular formula)/M(empirical formula) = 136.1 g/mol/276.2 g/mol = 0.4935. The molecular formula is obtained by multiplying the empirical formula by this factor: [tex]K_2H_2P_2O_8 * 0.4935 = K_2HPO_4[/tex]. Therefore, the molecular formula of the compound is [tex]K_2HPO_4[/tex].The molecular formula of the given compound having a composition of 28.73% K, 1.48% H, 22.76% P, and 47.03% O with a molar mass of 136.1 g/mol is [tex]K_2HPO_4[/tex]. The empirical formula of the compound is [tex]K_2H_2P_2O_8[/tex]. The compound's molecular formula is calculated by determining the factor by which the empirical formula should be multiplied to obtain the molecular formula. The factor is M(molecular formula)/M(empirical formula) = 136.1 g/mol/276.2 g/mol = 0.4935. The molecular formula of the compound is obtained by multiplying the empirical formula by this factor, resulting in the molecular formula [tex]K_2HPO_4[/tex].For more questions on empirical formula
https://brainly.com/question/13058832
#SPJ8
The correct question would be as
The composition of a compound is 28.73% K. 1.48% H, 22.76% P, and 47.03% O. The molar mass of the compound is 136.1 g/mol. What is the Molecular Formula of the compound?
[tex]KH_2PO_4\\KH_3PO_4\\K_2H_4P_20_{12}\\K_2H_3PO_6[/tex]
Suppose a solution has a density of 1.87 g/mL. If a sample has a mass of 17.5 g the volume of the sample in mL is what?
How many hydrogen atoms could bong with oxygen in this illustration of an oxygen atom?
C. 2, hydrogen atoms could bong with oxygen in this illustration of an oxygen atom.
In the given illustration of an oxygen atom, there are two unpaired electrons in the outermost electron shell. Each oxygen atom can form a covalent bond by sharing one electron with another atom. In the case of oxygen, it has a valence of 2, which means it can form up to two covalent bonds. Each hydrogen atom has one electron, and it requires one additional electron to complete its outermost electron shell.
Therefore, in the given illustration, the oxygen atom can form two covalent bonds with hydrogen atoms. This is represented by the formula H2O, where one oxygen atom is bonded to two hydrogen atoms.
Hence, the correct answer is C. 2. Two hydrogen atoms can bond with one oxygen atom to form a stable molecule of water. The sharing of electrons in covalent bonds allows atoms to achieve a more stable electron configuration and form compounds with different properties.
The question was incomplete. find the full content below:
How many hydrogen atoms could bong with oxygen in this illustration of an oxygen atom?
A. 0
B. 1
C. 2
D. 6.
Know more about covalent bonds here:
https://brainly.com/question/3447218
#SPJ8
organic functional groups that are found in morphine but not in cannabinol
What is the frequency of a photon if the energy is 5.27 × 10⁻¹⁹ J? (h = 6.626 × 10⁻³⁴ J • s)
Answer:
To calculate the frequency of a photon with energy of 5.27 × 10⁻¹⁹ J, we can use the equation E = hf, where E is the energy of the photon, h is Planck's constant (6.626 × 10⁻³⁴ J • s), and f is the frequency of the photon. Solving for f, we get:
f = E/h = (5.27 × 10⁻¹⁹ J)/(6.626 × 10⁻³⁴ J • s) = 7.95 × 10¹⁴ Hz
Therefore, the frequency of the photon is 7.95 × 10¹⁴ Hz.
Explanation:
Which chemical equation represents a precipitation reaction ?
The correct option that represents a precipitation reaction is:
B. K2CO3 + PbCl2 -> 2KCl + PbCO3
In a precipitation reaction, two aqueous solutions are mixed, resulting in the formation of an insoluble solid called a precipitate. This solid is formed due to the combination of certain ions that are no longer soluble in the solution.
In option B, when potassium carbonate (K2CO3) reacts with lead chloride (PbCl2), it produces potassium chloride (2KCl) and lead carbonate (PbCO3) as the products. Lead carbonate is an insoluble compound and forms a precipitate, which indicates a precipitation reaction.
Options A, C, and D do not represent precipitation reactions:
- Option A represents a double displacement reaction between magnesium bromide (MgBr2) and hydrochloric acid (HCl), resulting in the formation of magnesium chloride (MgCl2) and hydrogen bromide (HBr).
- Option C represents a substitution reaction between lithium acetate (LiC2H3O2) and tetrabromotitanium (IV) (TiBr4), forming lithium bromide (LiBr) and tetrakis(acetato) titanium (IV) (Ti(C2H3O2)4).
- Option D represents a double displacement reaction between ammonium nitrate (NH4NO3) and copper chloride (CuCl2), resulting in the formation of ammonium chloride (NH4Cl) and copper nitrate (Cu(NO3)2).
Therefore, option B is the correct representation of a precipitation reaction.
F0r more questions on precipitation, click on:
https://brainly.com/question/14330965
#SPJ8
7. [day Dr. Linus Pauling says that if you take 1500. mg of vitamin C each day you will have milder and fewer colds. How many pounds per year is this? (assume 365 days per year)
Taking 1500 mg of vitamin C daily amounts to approximately 1.2045 pounds per year.
Dr. Linus Pauling suggested that taking 1500 mg of vitamin C daily could result in milder and fewer colds. To determine the weight in pounds per year, we'll first convert milligrams to pounds and then multiply by the number of days in a year.
To convert milligrams to pounds, we need to know that there are 453,592.37 milligrams in a pound. Therefore, 1500 mg is equal to 0.0033 pounds (1500 mg / 453,592.37 mg/lb).
Now, to calculate the weight in pounds per year, we'll multiply 0.0033 pounds by the number of days in a year (365).
Weight in pounds per year = 0.0033 pounds/day * 365 days/year = 1.2045 pounds/year.
Therefore, taking 1500 mg of vitamin C daily amounts to approximately 1.2045 pounds per year.
It's important to note that while this calculation provides the weight equivalent, the effectiveness and recommended dosage of vitamin C for preventing colds should be discussed with a healthcare professional, as individual needs may vary.
For more questions on vitamin C, click on:
https://brainly.com/question/24268138
#SPJ8
A student carried out an experiment to find the mass of FeSO4.7H20 in an impure sample, X. The student recorded the mass of X. This sample was dissolved in water and made up to 250cm^3 of solution. The student found that, after an excess of acid had been added, 25.0cm^3 of this solution reacted with 21.3cm^3 of a 0.0150 moldm^-3 solution of K2Cr2O7. Use this information to calculate a value for the mass of FeSO4.7H20 in the sample X.
I understand the calculations part of the question, but i never understood how to work out the equation involved, which is:
6Fe2+ + Cr2O72- + 14H+ --> 6Fe3+ +2Cr3+ +7H2O
How do i work this out? Why are there 6 moles of Fe2+? what does it mean if there is an impurity, X? i am just really confused about this question if someone could elaborate clearly i will be really happy, thanks
I understand that you're looking for clarification on the balanced chemical equation and the concept of impurities. Let's break it down.
1. Balanced chemical equation:
The given balanced equation is:
6Fe2+ + Cr2O72- + 14H+ → 6Fe3+ + 2Cr3+ + 7H2O
To understand why there are 6 moles of Fe2+, you need to recognize that the coefficients in a balanced chemical equation represent the stoichiometric ratios between reactants and products. In this redox reaction, the Fe2+ ions are being oxidized to Fe3+ ions, and the Cr2O72- ions are being reduced to Cr3+ ions. The balanced equation is derived through balancing the charges and atoms on both sides of the equation, ensuring that the number of electrons transferred in the redox process is equal.
2. Impure sample X:
The problem states that the sample X is an impure sample of FeSO4.7H2O. This means that the sample contains FeSO4.7H2O as well as other substances (impurities) which do not participate in the reaction. These impurities do not affect the stoichiometry of the reaction but may contribute to the mass of the sample. The goal of the problem is to determine the mass of FeSO4.7H2O in the sample, disregarding the impurities.
Now, let's carry out the calculations to find the mass of FeSO4.7H2O in the sample X:
1. From the balanced equation, we know that 6 moles of Fe2+ react with 1 mole of Cr2O72-.
2. Calculate the moles of Cr2O72- used in the reaction from the volume and concentration of K2Cr2O7 solution:
Moles of Cr2O72- = Volume (dm^3) × Concentration (mol/dm^3)
Moles of Cr2O72- = 0.0213 dm^3 × 0.0150 mol/dm^3 = 3.195 × 10^-4 mol
3. Calculate the moles of Fe2+ in the 25.0 cm^3 aliquot of the 250 cm^3 FeSO4 solution:
Moles of Fe2+ = 6 × Moles of Cr2O72-
Moles of Fe2+ = 6 × 3.195 × 10^-4 mol = 1.917 × 10^-3 mol
4. Calculate the moles of Fe2+ in the entire 250 cm^3 FeSO4 solution:
1.917 × 10^-3 mol (in 25.0 cm^3) × (250 cm^3 / 25.0 cm^3) = 0.01917 mol
5. Calculate the mass of FeSO4.7H2O in the sample X:
Mass = Moles × Molar mass
Mass = 0.01917 mol × (151.91 + 7 × 18.015) g/mol = 0.01917 mol × 278.015 g/mol = 5.33 g (approximately)
Thus, the mass of FeSO4.7H2O in the impure sample X is approximately 5.33 g.
What does percent composition tell you about a molecule?
Answer:
Percent composition tells you the relative amounts of each element in a molecule by mass. It can be used to determine the empirical formula of a compound, as well as to compare the composition of different molecules.
For example, the percent composition of water (H2O) is 11.19% hydrogen and 88.81% oxygen by mass. This tells us that there are two hydrogen atoms for every one oxygen atom in the molecule.
Explanation:
Brainliest Plsss
John Dalton believed which of the following about atoms?
Atoms are real even though they're invisible.
The atom could be divided into smaller parts.
All atoms of a single substance are identical.
Atoms of different substances differ by weight.
Atoms of different substances differ by weight. Option D
A) Atoms are real even though they're invisible: Dalton proposed that atoms are fundamental, indivisible particles that make up all matter. While atoms themselves cannot be observed directly, their existence and behavior can be inferred through their effects on matter.
B) The atom could be divided into smaller parts: Initially, Dalton believed that atoms were indivisible and the ultimate building blocks of matter. However, subsequent scientific discoveries, such as the discovery of subatomic particles like protons, neutrons, and electrons, revealed that atoms could be further divided into smaller components.
C) All atoms of a single substance are identical: Dalton postulated that atoms of the same element are identical in size, mass, and chemical properties. According to his atomic theory, different elements are composed of unique atoms, and atoms of the same element are identical to one another.
D) Atoms of different substances differ by weight: Dalton recognized that atoms have different masses and proposed that the differences in atomic weight account for the distinct properties of different elements. He formulated the law of multiple proportions, which states that elements combine in fixed ratios of masses to form compounds.
Option D
For more such questions on Atoms visit:
https://brainly.com/question/6258301
#SPJ8
combustion always result in to formation of water. what other type of reactions may result into formation of water? examples of these reactions
As combustion always result into the formation of water, the other type of reactions that may result into formation of water are Acid-Base Neutralization Reactions and Hydrogen and Oxygen Reaction.
Acid-Base Neutralization Reactions:
A neutralisation reaction is a chemical process in which an acid and a base combine to produce salt and water as the end products.
H⁺ ions and OH⁻ ions combine to generate water during a neutralisation reaction. Acid-base neutralisation is the most common type of neutralisation reaction.
Example: Formation of Sodium Chloride (Common Salt):
HCl + NaOH → NaCl + H₂O
Hydrogen and Oxygen Reaction:
Water vapour is created when hydrogen gas (H₂) and oxygen gas (O₂) are combined directly. This reaction produces a lot of heat and releases a lot of energy.
Example: 2 H₂ + O₂ → 2 H₂O
Learn more about reactions:
https://brainly.com/question/25769000
Given: D thallium = 11.9/cm^3, 3.85g wanted:volume of thallium in cm^3 ?
Answer:
To find the volume of the thallium, we can use the formula:
density = mass/volume
Rearranging this formula, we get:
volume = mass/density
Plugging in the given values, we get:
Volume = 3.85g / 11.9 cm^-3
Using a calculator, we can solve for the volume:
Volume = 0.3235 cm^3
Therefore, the volume of the thallium is 0.3235 cm^3.
Explanation:
With the aid of a clearly labelled diagram, explain the effect of substrate concentration on the rate of reaction catalysed by an allosteric enzyme
Allosteric enzymes change shape upon binding an effector molecule, displaying a sigmoidal substrate concentration vs. reaction rate curve. The reaction rate increases until saturation, characterized by the enzyme's Km.
Allosteric enzymes are enzymes that change their shape upon binding of another molecule, known as an effector, to a specific site, the allosteric site. These enzymes are essential for regulating metabolic pathways in cells.A graph of substrate concentration vs. reaction rate for an allosteric enzyme often displays a sigmoidal curve. The enzyme initially binds the substrate molecule with a relatively low affinity, which corresponds to a low reaction rate. However, as the substrate concentration increases, more enzyme-substrate complexes are formed, causing a conformational change in the enzyme that increases its affinity for substrate molecules at other sites. As a result, the reaction rate increases sharply, but only up to a certain point, after which it levels off. The substrate concentration at which the reaction rate is half of its maximum value is known as the enzyme's Michaelis-Menten constant (Km). A substrate concentration that exceeds the Km does not affect the reaction rate. The enzyme is saturated with substrate molecules, so it cannot bind anymore.For more questions on Allosteric enzymes
https://brainly.com/question/29548129
#SPJ8
What is the molar mass for ZnI2?
The molar mass of ZnI2 is approximately 319.18 grams per mole.
To determine the molar mass of ZnI2 (zinc iodide), we need to know the atomic masses of zinc (Zn) and iodine (I) and their respective subscripts in the chemical formula.
The atomic mass of zinc (Zn) is approximately 65.38 grams per mole (g/mol), as found on the periodic table. The atomic mass of iodine (I) is approximately 126.90 g/mol.
Since the chemical formula of zinc iodide is ZnI2, it means there are two iodine atoms for every one zinc atom. Therefore, we multiply the atomic mass of iodine by 2.
Molar mass of ZnI2 = (atomic mass of Zn) + 2 × (atomic mass of I)
= 65.38 g/mol + 2 × 126.90 g/mol
= 65.38 g/mol + 253.80 g/mol
= 319.18 g/mol
Hence, the molar mass of ZnI2 is approximately 319.18 grams per mole.
For more questions on molar mass, click on:
https://brainly.com/question/837939
#SPJ8
Starting with 0.3500 mol CO(g) and 0.05500 mol COCl2(g) in a 3.050 L flask at 668 K, how many moles of CI2(g) will be present at equilibrium? CO(g) + Cl2(8)》COCl2(g)
Kc= 1.2 x 10^3 at 668 K
At equilibrium, the number of moles of Cl2(g) present is approximately 347.37 mol.
To determine the number of moles of Cl2(g) at equilibrium, we need to use the given equilibrium constant (Kc) and set up an ICE table to track the changes in the reactants and products.
The balanced equation for the reaction is:
CO(g) + Cl2(g) ⇌ COCl2(g)
Let's set up the ICE table:
CO(g) + Cl2(g) ⇌ COCl2(g)
Initial: 0.3500 0.05500 0
Change: -x -x +x
Equilibrium: 0.3500 - x 0.05500 - x x
Using the equilibrium concentrations in the ICE table, we can write the expression for the equilibrium constant (Kc) as:
Kc = [COCl2(g)] / [CO(g)][Cl2(g)]
Substituting the values into the equation, we have:
1.2 × 10^3 = (0.05500 - x) / [(0.3500 - x)(0.05500 - x)]
Simplifying the equation, we can cross-multiply and rearrange:
1.2 × 10^3 × (0.3500 - x)(0.05500 - x) = 0.05500 - x
Expanding and rearranging, we get:
0 = (1.2 × 10^3 × 0.05500 - 1.2 × 10^3x + 0.05500x) - x
Simplifying further:
0 = 66 - 1.245x + 0.05500x - x
0 = 66 - 0.19x
0.19x = 66
x = 66 / 0.19
x ≈ 347.37
For more such questions on equilibrium visit:
https://brainly.com/question/19340344
#SPJ8