match the following terms with the correct definitions. - homogeneous equilibrium - heterogeneous equilibrium - le chatelier's principle - complex ion a. a metal ion bonded to lewis acids. b. an equilibrium involving a catalyst in the same phase as the other species. c. an equilibrium involving a catalyst in a different phase as the other species. d. if a chemical reaction is subjected to a change in conditions that displaces it from equilibrium, then the reaction adjusts toward a new equilibrium state. the reaction proceeds in the direction that-at least partially-offsets the change in conditions. e. an equilibrium involving reactants and products in the same phase. f. a metal ion bonded to lewis bases. g. if a chemical reaction is subjected to a change in conditions that displaces it from equilibrium, the the reaction adjusts towards a new equilibrium state. the reaction proceeds in the direction that-at least partially-increases the change in conditions. h. none of these

The moles of potassium chloride needed to make 3M of 0.6L solution is 1.8 moles.

The mole designates 6.02214076×10²³ units, which is a very large number. The number of atoms discovered through experimentation to be present in 12 g of carbon-12 was originally used to define the mole. In honour of the Italian physicist Amedeo Avogadro, the number of units in a mole is also known as Avogadro's number or Avogadro's constant (1776–1856). Equal volumes of gases under identical conditions should contain the same number of molecules, according to Avogadro's hypothesis. This idea helped establish atomic and molecular weights and gave rise to the concept of the mole.

Avogadro's number or Avogadro's constant refers to the quantity of units contained in one mole of any substance. The value is 6.022140857×10²³. Depending on the nature of the reaction and the substance, the units may be electrons, ions, atoms, or molecules.

It links the quantity of substance to the number of particles, bridging the gap between the macroscopic and microscopic worlds.

To know more about Moles, visit:

https://brainly.com/question/26416088

#SPJ1

The given statement "a mixture of gases can be described as a solution because it is a homogeneous mixture that has a uniform composition throughout at the molecular level" is true because  properties of the mixture are the same throughout, and the composition of the mixture does not vary from one part to another.

A mixture of gases can be described as a solution because it is a homogeneous mixture, meaning that the composition is uniform throughout the mixture. This is true at the molecular level because the gases are thoroughly mixed, and the molecules of each gas are distributed evenly throughout the mixture.

Therefore, the properties of the mixture are the same throughout, and the composition of the mixture does not vary from one part to another.

Thus the given statement  "a mixture of gases can be described as a solution because it is a homogeneous mixture that has a uniform composition throughout at the molecular level" is true.

To learn more about homogeneous mixtures refer: https://brainly.com/question/30587533

#SPJ11

To familiarize students with experimental tools, the scientific method, and data analysis techniques so that they can understand the inductive process that led to the concepts.

Give a complete sentence description of each stage of the process. It also offers possible explanations (your hypothesis(es)) for what you anticipated the experiment to show. There should be one to three paragraphs in this part.

Before moving the study into clinical trials, experimental research enables you to test your hypothesis in a controlled setting. Additionally, it offers the best way to test your hypothesis due to the following benefits.

To know more about scientific method visit:-

https://brainly.com/question/26694164

#SPJ1

The theoretical yield in grams for the dehydration reaction of 4.00 ml of 2-methylcyclohexanol is 3.17E-5 g.

The theoretical yield in grams for the dehydration of 4.00 mL of 2-methylcyclohexanol can be calculated using the following steps:

1. 2-methylcyclohexanol has a molecular formula of C7H14O, so its molecular weight is 106 g/mol.

2. Since the question specifies 4.00 mL, we can convert that to 0.004 L. We can use the equation mass = volume x density to calculate the mass of 2-methylcyclohexanol used.

The density of 2-methylcyclohexanol is 0.841 g/mL, so the mass of 2-methylcyclohexanol used is 0.841 g/mL x 0.004 L, or 0.00336 g.

3. Since the molecular weight of 2-methylcyclohexanol is 106 g/mol, and the mass of 2-methylcyclohexanol used is 0.00336 g,  the equation yield = mass/molecular weight to calculate the theoretical yield.

The theoretical yield of the dehydration reaction is 0.00336 g/106 g/mol, or 3.17E-5 g.

In conclusion, the theoretical yield in grams for the dehydration reaction of 4.00 ml of 2-methylcyclohexanol is 3.17E-5 g.

to know more about 2-methylcyclohexanol refer here:

https://brainly.com/question/13915064#

#SPJ11

To determine the specific internal energy of a two-phase liquid-vapor mixture, we can use the steam tables. The steam tables provide information about temperature, volume, and energy for each phase of the mixture.

First, we must determine the specific volume of each phase at the given temperature.

The specific volume of the liquid phase is given in the liquid table, and the specific volume of the vapor phase is given in the vapor table. Then, we must use the specific volumes to calculate the mass of each phase.

Finally, the internal energy can be calculated by multiplying the mass of each phase by the specific internal energy of that phase, which is also given in the steam tables.

This process should be repeated for each temperature and specific volume of the two-phase mixture to accurately determine the internal energy.

to know more about internal energy refer here:

https://brainly.com/question/14668303#

#SPJ11

While calculating the mass for chloride, a student comes up with a negative number. The most likely the reason for this error, assuming they did the math correctly is that the student has used the wrong sign for the charge of the chloride ion.

Chloride is an anion, and its charge is negative, but the student may have used a positive sign while calculating it. For instance, the student may have assumed that the chloride ion has a charge of +1 instead of -1, which would have led to the negative mass value.

Besides that, there is no other reason for a negative mass value. The mass of a compound, such as chloride, is always positive and should not be negative at any time. Thus, it can be assumed that the student has made a mistake while assigning the sign for the charge of the chloride ion. However, it is essential to double-check the calculations to ensure that there are no other errors or mistakes in the calculations. Additionally, it is recommended to consult a teacher or a tutor for guidance in case of any confusion while calculating the mass of an ion or a compound.

Learn more about anion at:

https://brainly.com/question/14929591

#SPJ11

The oxidation number of Zn in the reaction represented by the equation: Zn + HCl → ZnCl2 + H is +2.

When a metal reacts with a non-metal, the metal takes on a positive charge, making its oxidation number positive. This is because the non-metal takes electrons from the metal, making the metal's charge positive.
In this reaction, the Zn atom is oxidized by the HCl molecule. Oxidation is defined as the loss of electrons. Zn is being oxidized because it is losing electrons to the HCl molecule. Since HCl is a non-metal, it is gaining electrons from Zn, thus making the oxidation number of Zn positive. The oxidation number of Zn is +2.

To sum up, the oxidation number of Zn in the reaction represented by the equation: Zn + HCl → ZnCl2 + H is +2. This is because when a metal reacts with a non-metal, the metal takes on a positive charge, making its oxidation number positive. In this reaction, the Zn atom is being oxidized by the HCl molecule, which is gaining electrons from Zn, thus making the oxidation number of Zn positive and equal to +2.

To know more about oxidation click on below link :

https://brainly.com/question/9496279#

#SPJ11

Quantitative inference: The energy of a wave is instantly proportional to the square of its amplitude. This means that if the amplitude of a wave is doubled from 2 to 4, the wave's energy will increase by a factor of four (2^2 = 4). This can be expressed mathematically as E2 = (A2/A1)^2xE1. Qualitative inference: Increasing the amplitude of a wave from 2 to 4 would result in a wave with higher energy. This means that the wave would be more intense and capable of doing more work.

Amplitude refers to the highest displacement of a wave from its resting position. In other words, it is the distance from the highest point (crest) to the lowest point (trough) of a wave, measured in distance units, such as meters or centimetres.

Yes, increasing the amplitude of a wave increases its energy. The energy of a wave is directly proportional to the square of its amplitude. This means that if the amplitude of a wave is doubled, its energy will increase by a factor of four, and if the amplitude is tripled, the energy will increase by a factor of nine.

To learn more about wave, visit here:

https://brainly.com/question/25954805

#SPJ9

a.

Calculation of the change in the enthalpy of the gas mixture during the reaction

It is known that:ΔH = ΔE + PΔVWhere,

ΔH = Change in enthalpy of the gas mixture

ΔE = Change in internal energy of the gas mixture

P = PressureΔV = Change in volume of the gas mixture

Now, according to the problem statement,

E = -370 kJ/mol = constant (since the reaction is carried out at constant pressure) ΔV = -97 kJ

Substituting the values in the above formula: H = -370 kJ + constant (-97 kJ) H = -370 kJ; constant = 97 kJ ΔH = -370 kJ - 97 constant kJ

This is the required change in enthalpy of the gas mixture during the reaction, where the value of the constant is unknown.

b.

Is the reaction exothermic or endothermic?

The reaction is exothermic if the value of H is negative and endothermic if the value of H is positive.

As per the above calculation, the value of H is negative.

Therefore, the reaction is exothermic.

To know more about the exothermic reaction https://brainly.com/question/10373907

#SPJ11

The correct numbers and symbol of elements represented by X are: (1). calcium (2). 18 (3) 15

For more information on atomic formula kindly visit to

https://brainly.com/question/29455002

#SPJ1

Answer: The mass of Na2SO4 that must be dissolved in enough water to give 350 mL of a 0.325 M solution of the compound is 16.154 g.

To determine the mass of Na2SO4 that must be dissolved in enough water to give 350 mL of a 0.325 M solution of the compound, use the formula:

mass = molarity x volume x molar mass

First, calculate the number of moles of Na2SO4 present in the solution:

n = M x Vn

= 0.325 mol/L x 0.350 Ln

= 0.11375 mol

Next, calculate the mass of Na2SO4 present in the solution using the molar mass of Na2SO4:

m = n x MMm

= 0.11375 mol x 142.04 g/molm

= 16.154 g

Therefore, the mass of Na2SO4 that must be dissolved in enough water to give 350 mL of a 0.325 M solution of the compound is 16.154 g.



Learn more about solvent dissolution here:

https://brainly.com/question/2364287#



#SPJ11

The heat released when 30.0 g of [tex]SO_{2}[/tex](g) reacts with 20.0 g of [tex]O_{2}[/tex](g) is 184.8 kJ.

To calculate the heat released when 30.0 g of [tex]SO_{2}[/tex](g) reacts with 20.0 g of [tex]O_{2}[/tex](g), we first need to determine the balanced chemical equation for the reaction:
[tex]SO_{2} (g) + 1/2 O_{2}(g)[/tex]  →  [tex]SO_{3}(g)[/tex]
Now, we need to find the limiting reactant. First, let's calculate the moles of each reactant:

moles of [tex]SO_{2}[/tex] = mass of [tex]SO_{2}[/tex] / molar mass of [tex]SO_{2}[/tex]
moles of [tex]SO_{2}[/tex] = 30.0 g / (32.1 g/mol + 32.0 g/mol) = 0.468 moles

moles of [tex]O_{2}[/tex] = mass of [tex]O_{2}[/tex] / molar mass of [tex]O_{2}[/tex]
moles of [tex]O_{2}[/tex] = 20.0 g / 32.0 g/mol = 0.625 moles

Now, we'll find the mole ratio:

mole ratio = moles of [tex]O_{2}[/tex] / (1/2 * moles of [tex]SO_{2}[/tex])
mole ratio = 0.625 / (1/2 * 0.468) = 2.67

Since the mole ratio is greater than 1, [tex]SO_{2}[/tex] is the limiting reactant.

Now, we need to find the heat released. The standard enthalpy change of the reaction (ΔH°) for the formation of [tex]SO_{3}[/tex] is -395.2 kJ/mol. Therefore, the heat released can be calculated as follows:

heat released = moles of limiting reactant * ΔH°
heat released = 0.468 moles * -395.2 kJ/mol = -184.8 kJ

So, the heat released when 30.0 g of [tex]SO_{2}[/tex](g) reacts with 20.0 g of [tex]O_{2}[/tex](g) is 184.8 kJ.

To learn more about heat released; https://brainly.com/question/22862842

#SPJ11

The tincture is a combination of iodine and an organic carrier that serves as a moderate-level disinfectant and antiseptic.

The iodine in the solution helps to kill bacteria and other microorganisms working as a disinfectant. A disinfectant is an agent that eliminates or lowers the risk of infection by killing or inactivating microorganisms. Disinfectants are frequently used to clean surfaces or equipment to reduce the risk of infection.

The alcohol helps to dissolve and spread the iodine evenly over the surface to be disinfected working as an antiseptic.

Antiseptic is a term that describes a substance that is applied to living tissue to reduce the risk of infection or sepsis. Antiseptics, such as hydrogen peroxide, alcohol, and iodine, are used to clean the skin before an operation or disinfect a wound after cleaning it.

Tincture of iodine is also used for minor wound care and as an emergency water purification method.

To learn more about the tincture of Iodine refer - https://brainly.com/question/13052216

#SPJ11

0.039 moles of Chalk were used.

To find the number of moles of chalk used, we need to first calculate the change in mass of the chalk:

Change in mass = initial mass - final mass

Change in mass = 43.5 g - 39.6 g

Change in mass = 3.9 g

Next, we need to convert the change in mass to moles of CaCO3:

Molar mass of CaCO3 = 40.08 g/mol + 12.01 g/mol + 3(16.00 g/mol) = 100.09 g/mol

Moles of CaCO3 used = (Change in mass of CaCO3) / (Molar mass of CaCO3)

Moles of CaCO3 used = 3.9 g / 100.09 g/mol

Moles of CaCO3 used = 0.039 moles

Therefore, 0.039 moles of CaCO3 were used.

To know more about moles click here:

brainly.com/question/20486415

#SPJ4

Answer:

carbon-magnesium

Explanation:

H3C - Mg - Br

It is reasonable to focus on the concentration of crystal violet and ignore the concentration of NaOH when drawing conclusions based on the colorimetric analysis.

Based on the background information, it is likely that the purpose of using NaOH in the experiment is to act as a stabilizing agent or to adjust the pH of the solution. NaOH is a strong base that can help to maintain a stable pH, which is important for the accuracy and consistency of the results.

However, in terms of the colorimetric analysis of crystal violet, the concentration of NaOH is not directly relevant to the measurement. Crystal violet is a dye that is absorbed by a target substrate, and the resulting color change is measured using a spectrophotometer.

The concentration of NaOH, while important for the stability of the solution and the pH of the reaction, does not have a direct impact on the colorimetric measurement of crystal violet.

To know more about crystal violet:

https://brainly.com/question/27181297

#SPJ4

A mole of donuts would weigh 3.42 kg, as a dozen donuts weigh 285 g and a mole is 6.022 x 1023 donuts. To calculate this, you need to multiply the weight of a dozen donuts by the number of donuts in a mole.

First, you need to calculate the weight of a single donut. Since there are 12 donuts in a dozen, divide the weight of a dozen (285 g) by 12 to get the weight of a single donut, which is 23.75 g.

Then, you need to multiply the weight of a single donut (23.75 g) by the number of donuts in a mole (6.022 x 1023) to get the weight of a mole of donuts. This is equal to 3.42 kg.

To know more about mole click below:

https://brainly.com/question/20486415

#SPJ11

To summarize, at absolute zero, the energy needed for diffusion to occur is completely absent, and the molecules are completely frozen. So diffusion does not take place.

Diffusion is a process of net movement of molecules from an area of high concentration to an area of low concentration. The process of diffusion requires some form of energy, and at absolute zero, the energy is completely eliminated. This means that there would be no potential for molecules to move from a region of higher concentration to one of lower concentration. Therefore, diffusion does not occur at absolute zero.  At absolute zero, molecules stop vibrating and the atoms cease all motion. All molecular motion is frozen and stopped, so diffusion is not possible. Diffusion requires energy to move molecules, which is not available at absolute zero. The energy needed to drive molecules to move is not present, so molecules cannot move.

Learn more about Diffusion: https://brainly.com/question/94094

#SPJ11

When the volume of the reaction mixture is reduced, the reaction will shift in the direction of products. The correct option is (A).

Equilibrium is the state in which the reactants and products of a chemical reaction are in balance. Equilibrium occurs when the forward and reverse reactions of a reversible reaction occur at the same rate.

Le Chatelier's principle is a principle that explains how the equilibrium of a system responds to a change in the system's conditions. It states that if a system at equilibrium is subjected to a change, the system will adjust itself to counteract the change and establish a new equilibrium.

The equilibrium constant will increase, the reaction will shift in the direction of products, and no effect will be observed are all possible effects of reducing the volume of the reaction mixture on the system.

In the given chemical reaction, CuS(s) + O2(g) ↔ Cu(s) + SO2(g), if the volume of the reaction mixture is reduced, it will create an increase in pressure.

As a result, the reaction will move in the direction that produces a smaller number of moles of gas, according to Le Chatelier's principle.

In this reaction, the reactants have two moles of gas, while the products have only one mole of gas. As a result, the reaction will shift in the direction of products, as it results in a lower number of moles of gas.

As a result, the reaction will shift in the direction of products when the volume of the reaction mixture is reduced.

To know more about reaction shift, refer here:

https://brainly.com/question/30827400#

#SPJ11

The final molar amount of gas present in the container is approximately 2.98 moles.

The initial conditions of the gas are:

n1 = 1.79 moles of nitrogen gas

V1 = 3.0 L

P = constant

The final conditions of the gas are:

V2 = 5.0 L

n2 = ?

Since pressure is constant, we can use the combined gas law to find the final amount of gas:

(P1V1)/n1 = (P2V2)/n2

Plugging in the values we know:

(P1)(3.0 L)/(1.79 mol) = (P2)(5.0 L)/n2

Solving for n2:

n2 = (P2)(5.0 L)/(P1)(3.0 L/1.79 mol)

Since the pressure is constant, we can cancel it out:

n2 = (5.0 L)/(3.0 L/1.79 mol)

n2 = 2.98 mol

Learn more about gas law

https://brainly.com/question/27009857

#SPJ4

Full Question: 1.79 moles of nitrogen gas are contained in a 3.0 L container. if pressure is kept constant, what is the final molar amount of gas present in the container if gas is added until the volume has increased to 5.0L?

The suggested name of the substance represented in the diagram is ozone, and its chemical formula is O₃.

Ozone is a triatomic molecule, which means it is made up of three oxygen atoms (O). In the sketch you provided, the three oxygen atoms are represented by the letter "O" with a dot inside, which is a common way to depict atoms in chemical structures.

The structure of ozone is often depicted using a resonance structure, which means that the electrons are spread out evenly between the three oxygen atoms. This makes the molecule more stable and less reactive than it would be if the electrons were concentrated on one or two atoms.

Ozone is a pale blue gas with a pungent odor. It is found in small amounts in the Earth's atmosphere, where it plays an important role in protecting the planet from harmful ultraviolet radiation from the sun. However, at ground level, ozone can be harmful to human health and the environment. Ozone is a strong oxidizing agent and can damage lung tissue, and it can also harm plants and animals.

Learn more about Ozone here: https://brainly.com/question/26254261

#SPJ1

The solution high salt concentration should observe the greatest total amount of water uptake when steady state is achieved

Osmosis is refers to the movement of water from areas of high concentration to areas of low concentration across a semi-permeable membrane. When the concentration of solutes in two solutions on opposite sides of the membrane is unequal, water will move from the side with the lower solute concentration to the side with the higher solute concentration in an attempt to equalize the concentration of solutes on both sides. This movement of water will continue until the concentration of solutes is equal on both sides. When steady state is achieved, the rate of water movement from one solution to another becomes equal.

As a result, a solution with a higher salt concentration will have a greater total amount of water uptake when steady state is achieved. Because more water is needed on the side with higher solute concentration to make the concentration equal, the solution with a higher solute concentration will absorb more water until equilibrium is established.

Learn more about osmosis at:

https://brainly.com/question/31028904

#SPJ11

676.1 kg of cryolite will be produced in this reaction.

In order for 14.8 kg of Al2O3(s), 56.4 kg of NaOH(l), and 56.4 kg of HF(g) to completely react, 8.8 kg of cryolite will be produced. This can be determined by performing a simple mole-to-mole conversion.

The moles of each reactant. Al2O3(s) has an atomic mass of 101.96, NaOH(l) has an atomic mass of 39.997, and HF(g) has an atomic mass of 20.01.

Therefore, the moles of Al2O3(s) are 14.8/101.96 = 0.145 moles, the moles of NaOH(l) are 56.4/39.997 = 1.41 moles, and the moles of HF(g) are 56.4/20.01 = 2.81 moles.

Convert the moles of each reactant to moles of cryolite. The chemical equation for the reaction is:

Al2O3(s) + 2NaOH(l) + 3HF(g) = 2Na3AlF6(s) + 3H2O(l)

This means that the ratio of Al2O3(s) to Na3AlF6(s) is 1:2, the ratio of NaOH(l) to Na3AlF6(s) is 2:2, and the ratio of HF(g) to Na3AlF6(s) is 3:2.

Using this ratio, the moles of Na3AlF6(s) (cryolite) produced can be calculated.

The moles of Na3AlF6(s) produced are 0.145/1 x 2 = 0.290 moles, 1.41/2 x 2 = 1.41 moles, and 2.81/3 x 2 = 1.87 moles. This gives a total of 0.290 + 1.41 + 1.87 = 3.6 moles of Na3AlF6(s).

Convert the moles of Na3AlF6(s) to kilograms. Na3AlF6(s) has an atomic mass of 187.3.

Therefore, the kilograms of Na3AlF6(s) produced are 3.6 x 187.3 = 676.1 kg. Since 1 kg of Na3AlF6(s) is equal to 1 kg of cryolite, 676.1 kg of cryolite will be produced in this reaction.

to know more about cryolite refer here:

https://brainly.com/question/14516036#

#SPJ11



The extremophile sulfolobus acidicaldonius survives under high acidity and high temperature.

Thus, the correct answers are high temperature and high acidity (A and E).

A thermoacidophile species, such as Sulfolobus acidocaldarius, belong to the archaea phylum and is resistant to both high temperatures and highly acidic conditions. The adaptions of this species include that the optimal pH of its enzyme will lie below pH 7, since those are acidic conditions. Also, thermoacidophile species can inhabit hydrothermal springs, since they can live in high-temperature conditions.

Your question is incomplete, but most probably your options were

A. high temperature

B. low pressure

C. low oxygen

D. high alkalinity

E. high acidity

Thus, the correct options are A and E.

For more information about sulfolobus acidicaldonius refers to the link: https://brainly.com/question/15874458

#SPJ11

Answer:

Ra3P2

Explanation:

Ra is +2

P is -3

Ra3P2

Calculating the volume of HCl that fully reacted with calcium carbonate, the following steps should be followed:

Step 1: Write the balanced chemical equation for the reaction between HCl and calcium carbonate.

CaCO3 + 2HCl → CaCl2 + CO2 + H2O

Step 2: Calculate the molar mass of CaCO3.CaCO3: 1(40.08) + 1(12.01) + 3(16.00) = 100.09 g/mol

Step 3: Calculate the moles of CaCO3 used.

Mass of CaCO3 used = 0.548 g

Moles of CaCO3 used = 0.548 g / 100.09 g/mol = 0.00548 mol

Step 4: Use the balanced chemical equation to determine the moles of HCl required to react completely with the CaCO3. According to the balanced equation, 2 moles of HCl react with 1 mole of CaCO3.

Therefore, the number of moles of HCl required is:

2 mol HCl/mol CaCO3 × 0.00548 mol CaCO3 = 0.01096 mol HCl

Step 5: Calculate the volume of HCl required to provide this number of moles. The molarity (M) of the HCl solution is given as 0.101 M.

Using the formula for molarity (M = moles of solute/liters of solution), we can rearrange the equation to solve for volume.

The volume of HCl = moles of solute / molarity= 0.01096 mol / 0.101 mol/L = 0.1086 L or 108.6 mL

Therefore, the volume of HCl that fully reacted with the calcium carbonate is 108.6 mL.

Note that this is not the total volume of HCl initially added nor is it the amount needed to neutralize the titrant.

to know more about balanced equation refer here:

https://brainly.com/question/7181548#

#SPJ11

The pH at which the ratio of [HA₂⁻] to [H₂A⁻] is 25:1 is 11.1.

Titration is a technique used to determine the concentration of a solution by reacting it with a standardized solution. This process can be used to determine the acidity or basicity of a solution.

Assume that the equilibrium represented around point (A) in the titration can generically be described as:

                         H₃A + OH⁻ → H₂A⁻ + HOH

Ka₁ = 6.76 x 10⁻³

Ka₂ = 9.12 x 10⁻¹⁰

There are three stages to the titration curve. The first stage corresponds to the point at which there is an excess of strong base, and the pH changes rapidly with each addition of base. The second stage corresponds to the buffer region, and the pH changes only slightly with each addition of base. Finally, the third stage corresponds to the point at which the excess base is equal to the amount of acid present in the solution, and the pH changes rapidly once again.

In the equation H₃A + OH⁻ → H₂A⁻ + HOH the first dissociation constant, Ka₁, is equal to

[ H₂A⁻ ][H⁺]/[H₃A]

The second dissociation constant, Ka₂, is equal to

[H₃A⁻ ][OH⁻ ]/[H₂A⁻ ]

Let's assume that the equilibrium is initially set up at pH pKa₁, such that [H₃A] = [H₂A⁻ ].

The pH of the solution at equilibrium will be equal to pKa₁.

Let's suppose that a strong base is added to the solution, and the amount of [OH⁻ ] added is x.

As a result, [H₃A] and [H₂A⁻ ] will be reduced by x, while [HA₂⁻] will be increased by x.

[H₃A] = [HA₂⁻] = [H+];

[OH⁻] = x;

[HA₂⁻] = [OH⁻-];

[H₃A] - x;

[H₂A⁻] - x

We can then calculate the concentration of each species using the expression for the acid dissociation constant:

[H₃A] = [H2A⁻] = [H+];

[OH⁻] = x;

[HA₂⁻] = [OH⁻];

[H₃A] - x;

[H₂A-] - x

Ka₁ = [H₂A⁻][H+]/[H₃A]

Ka₁ = x^2 / ([H+]-x)

Ka₂ = [HA₂⁻][OH⁻]/[H₂A⁻]

Ka₂ = [x][x] / ([H+]-x)

Ka₂= x²/([H+]-x) = 25

Ka₁ is used to calculate [H+]

Ka₂ is used to calculate:

Ka₂ [HA₂⁻] / [H₂A⁻][H+] = 2.06 x 10⁻⁶,

pH = 5.68

[H₂A⁻] / [HA₂⁻] = 0.04,

[HA₂⁻] = [HA₂⁻] * 25 = 1.00 x 10⁻⁴

[OH-] = Ka₂ [H₂A-] / [HA₂⁻] = 9.12 x 10⁻¹⁰ * [H₂A⁻] / [HA₂⁻] = 2.28 x 10⁻¹⁴

pOH = 13.64

pH = 11.1

Therefore, at pH 11.1, the ratio of [HA₂⁻] to [H₂A⁻] is 25:1.

Learn more about titration at https://brainly.com/question/186765

#SPJ11

The volume of 1.050 M potassium hydroxide required to react with 22.2 ml of 0.755 M nitrous acid is 8.05 ml.

Values of potassium hydroxide and nitrous acid are: Volume of potassium hydroxide, V(KOH) =n

Molarity of potassium hydroxide, M(KOH) = 1.050 MVolume of nitrous acid, V(HNO2) = 22.2 mlMolarity of nitrous acid, M(HNO2) = 0.755 M

The balanced chemical reaction between potassium hydroxide and nitrous acid can be represented as:2KOH(aq) + HNO2(aq) ⟶ K2O(aq) + 2H2O(l)

The above reaction that the reaction involves 2 moles of potassium hydroxide (KOH) and 1 mole of nitrous acid (HNO2).

The chemical equation is not balanced as the potassium hydroxide is present in excess so only the nitrous acid will react.

To find the volume of potassium hydroxide required, we can use the mole-to-volume relation and the stoichiometric coefficient of nitrous acid in the chemical equation.

So the volume of potassium hydroxide required can be calculated as follows:Volume of potassium hydroxide, V(KOH) = 1/2 × V(HNO2) × M(HNO2)/M(KOH) = 1/2 × 22.2 ml × 0.755 M/1.050 M= 8.05 ml

Therefore, the volume of 1.050 M potassium hydroxide required to react with 22.2 ml of 0.755 M nitrous acid is 8.05 ml.

to know more about potassium hydroxide refer here:

https://brainly.com/question/21904397#

#SPJ11

Atomic mass refers to the mass of an atom, typically expressed in atomic mass units (AMU). It is a measure of the total mass of protons, neutrons, and electrons present in an atom. The correct answer choice is 0.694 g.

The atomic mass of an element is listed on the periodic table and is calculated as the weighted average of the masses of its naturally occurring isotopes. Isotopes are atoms of the same element that have different numbers of neutrons.

To determine the mass of 0.100 moles of lithium, we need to use the molar mass of lithium (Li). The molar mass is the mass of one mole of a substance and is equal to the atomic mass of the element.

The atomic mass of lithium (Li) is approximately 6.94 g/mol.

To calculate the mass of 0.100 moles of lithium, we can use the following equation:

Mass = Molar mass × Number of moles

Mass = 6.94 g/mol × 0.100 mol

Mass = 0.694 g

Therefore, the correct answer choice is 0.694 g.

For more details regarding atomic mass, visit:

https://brainly.com/question/29117302

#SPJ12

Strong acids are substances that have a high affinity for protons, meaning that they can donate or accept protons in order to form an acid-base equilibrium. The following substances are strong acids: HF, HI, HCl, H2SO4, HNO3, HBr, HClO, HClO2, HClO3, HClO4, H2S, CH3COOH, H3PO4, NH3, NH4Cl, KOH, FeCl3, H2N2, Ca(OH)2, and CH3NH2.

HF is a hydrogen halide and is the strongest of the acids listed above. It is used in industrial applications as a strong oxidizing agent. HI is another hydrogen halide, and it is used in the production of organic compounds. HCl, also known as hydrochloric acid, is a strong acid that is commonly used in the chemical industry. H2SO4 is a strong mineral acid used in the production of fertilizers and dyes.

HNO3 is a strong oxidizing agent and is used in the production of fertilizers and explosives. HBr is a strong acid used in the production of organic compounds. HClO, HClO2, HClO3, and HClO4 are strong oxidizing agents that are used in the chemical industry.

Know more about Strong acids here:

https://brainly.com/question/16749233

#SPJ11