Interpreting data (Box & Whisker & Histogram) & Review Systems
For questions 1-4 use the graph below to answer the following questions/problems.



1. What is the value of the third quartile shown on the box-and-whisker plot?
2. Determine the interquartile range? Determine the range?
3. How many people were surveyed?
12
4. What is the type of average you can find? Find that average.

If the objective function coefficient for variable 1 decreases by 20, the solution will shift in the direction of the decrease in the objective function coefficient. It means that the optimal solution that was obtained previously will no longer remain optimal, and the new optimal solution will be found with the new objective function coefficient.

In linear programming, the objective function determines the maximum or minimum value that can be attained in the solution, subject to the constraints. The constraints in the problem can be either equalities or inequalities, which limit the range of values that the decision variables can take on.

The change in the objective function coefficient will change the direction of the optimal solution, and it may affect the feasibility of the solution. It means that some constraints may no longer be satisfied, or some variables may become infeasible.

In such cases, it will be necessary to revise the constraints or the variables to ensure the feasibility of the solution.

The solution can also be affected if the constraints of the problem change. The new constraints may limit the range of values that the variables can take on, or they may add new variables to the problem. These changes can affect the feasibility of the solution, and it may require the problem to be solved again to obtain the new optimal solution.


To know more about linear programming, refer here:

https://brainly.com/question/30763902#

#SPJ11

Answer:  The area of the smaller circle is [tex]65.6cm^{2}[/tex].

Step-by-step explanation:

A = [tex]\pi r^{2}[/tex], r is the radius.

1. Find out the diameter of the small circle.

[tex]\frac{1}{3}(27)= 9[/tex]

2) Find out the radius, r.

[tex]radius = \frac{diameter}{2} =\frac{9}{2} =4.5[/tex]

3) We plugin r = 4.5 into the formula to solve the area of the smaller circle.

[tex]A=\pi r^{2}=\pi (4.5)^{2} =65.6cm^{2}[/tex]

The furnsale7 data set appears to take the form of a panel data structure.

Panel data is a type of longitudinal data that combines observations over multiple time periods for the same individual or group.

This type of data contains multiple observations for the same unit over time and provides valuable insight into changes that occur over time.

Panel data can provide valuable insights into long-term trends and changes in behavior or trends in a population. Panel data can also be used to study economic growth and development, market trends, and consumer behavior.

To know more about data structure click on below link:

https://brainly.com/question/29487957#

#SPJ11

There are 6,354,000 choices for the password.

To generate a password, you need to have 4 letters followed by 2 even digits between 0 and 9, inclusive.

If the characters and digits cannot be used more than once,

Solution: We have to find the number of choices of the password with given conditions.

To find the number of choices, let us follow the following steps:

Step 1: Choose the first letter in 26 ways

Step 2: Choose the second letter in 25 ways (excluding the letter that we have already chosen)

Step 3: Choose the third letter in 24 ways (excluding the 2 letters that we have already chosen)

Step 4: Choose the fourth letter in 23 ways (excluding the 3 letters that we have already chosen)

Step 5: Choose the first even digit in 5 ways (from 0, 2, 4, 6, and 8)

Step 6: Choose the second even digit in 4 ways (excluding the even digit that we have already chosen)

Therefore, the total number of choices for the password with the given conditions is given by:

Total number of choices = 26 × 25 × 24 × 23 × 5 × 4= 6,354,000.

For similar question on choices.

https://brainly.com/question/28338909

#SPJ11

The degrees of freedom associated with the t-test is [tex]n_1 + n_2[/tex] - 2. The t-distribution is used to calculate the p-value of the t-test. There is no significant difference between the mean number of lesions per leaf produced by the two strains.

The appropriate t-test for testing to see if there is a difference between the mean number of lesions per leaf produced by the two strains has [tex]n_1 + n_2[/tex] - 2 degrees of freedom.

Here, [tex]n_1[/tex]  is the sample size of the first group and [tex]n_2[/tex]  is the sample size of the second group. This t-test is a two-sample t-test where the samples are independent and normally distributed with equal variances.
The formula for the t-test is:
[tex]t = (x_1 - x_2) / (s \times \sqrt{(1/n_1 + 1/n_2))}[/tex]
Where [tex]x_1[/tex] and [tex]x_2[/tex]  are the sample means of the two groups, s is the pooled standard deviation, and [tex]n_1[/tex] and [tex]n_2[/tex] are the sample sizes of the two groups.
The pooled standard deviation is calculated as:
s = [tex]\sqrt{((n_1 - 1) \times s_1^2 + (n_2 - 1) \times s_2^2)}  / (n_1 + n_2 - 2)[/tex]
Where [tex]s_1[/tex] and [tex]s_2[/tex] are the sample standard deviations of the two groups.
The p-value is the probability of getting a test statistic as extreme or more extreme than the observed test statistic, assuming the null hypothesis is true. If the p-value is less than the significance level (usually 0.05), then the null hypothesis is rejected and it is concluded that there is a significant difference between the mean number of lesions per leaf produced by the two strains. Otherwise, the null hypothesis is not rejected.

For similar question on t-test

https://brainly.com/question/6589776

#SPJ11

The steps to find the depth through which the storm submerges the lowest parts of the Pensacola Beach is given below.

As it has been given in the question, Pensacola beach is located 5-10 feet above sea level.

The ocean water rises upto 5.5 feet during a storm

Hence you need to add up the height of the highest tide on 16 September to 5.5 feet.

If the combined height of the highest tide and the storm tide is greater than 10 feet, then the whole Pensacola beach submerges.

You just subtract the combined height of the storm and the highest tide from the height of the beach.

Read more about storms and tides here:

https://brainly.com/question/15617225

#SPJ1

Portions of Pensacola Beach, a coastal community built on a barrier island, are located at 3 - 10 feet above sea level.

Hurricane Sally, which struck Pensacola on September 16, 2020 and brought a 5.5 foot storm.

Combined with a high tide on September 16,202, by how many feet did that storm surge submerge the lowest parts of Pensacola Beach? (Hint: use the information in question and change the date on the tidal chart to September 16, 2020) Now, compare your answers above, and think about how the type (pattern) and size of the tides differ for these two locations

Answer:

Diameter is equal to twice the radius. Given, radius is 4 cm. Diameter = 2(4) = 8 cm. Hence, diameter of the circle with radius as 4 cm is 8 cm.

Step-by-step explanation:

please

give brianliest

Answer: Area = 0

Step-by-step explanation:

((2*2)*3.14)-(4*3.14) = 0

Step-by-step explanation:

The side opposite to the 4 degree angle is 18 m

The side adjacent the 4 degree angle is x

tan(4) = opposite / adjacent

adjacent = opposite / (tan(4))

adjacent = 18 / tan(4)

adjacent = 257.41

The probability that a specific fire engine is not available when needed is 0.04 (since the probability of it being available is 0.96).

The question asks for two probabilities related to the availability of fire engines in a town. The first part asks for the probability that neither engine is available when needed, and the second part asks for the probability that a fire engine is available when needed.

To calculate the probability that neither engine is available when needed, we need to use the multiplication rule for independent events. We know that the probability that one specific engine is not available when needed is 0.04 (1 - 0.96). Since the two engines operate independently, the probability that both are not available when needed is the product of their individual probabilities:

P(neither available) = P(engine 1 not available) * P(engine 2 not available)

P(neither available) = 0.04 * 0.04

P(neither available) = 0.0016

Therefore, the probability that neither fire engine is available when needed is 0.0016.

To calculate the probability that a fire engine is available when needed, we can simply use the given probability of 0.96:

P(available) = 0.96

Therefore, the probability that a fire engine is available when needed is 0.96.

To learn more about Probability here:

brainly.com/question/11234923#

#SPJ11

Answer:

1  4(3-r)  or  12-4r

2.  7( 8-m) or 56-7m

3.   -2

Step-by-step explanation:

1) |4r−12| , if r<3

|4r-12|

Factor out a 4

4|r-3|

|r-3| will be less than 0 since r is less than 3

So we can rewrite it as 3-r to remove the absolute value signs and make it positive

4 (3-r)

12 -4r

2.   |7m–56| , if m<8

Factor out a 7

7| m-8|  

|m-8| will be less than 0 since m is less than 8

So we can rewrite it as  8-m to remove the absolute value signs and make it positive

7( 8-m)

56-8m

3) |z−7|−|z−9| , if z<7

|z-7| will be less than 0 since z is less than 7  and |z-9| will be less than 0 since z is less than 7

So we can rewrite it as  7-z  and 9-z to remove the absolute value signs and make it positive

7-z - (9-z)

Distribute the minus sign

7-z-9+z

-2

The extreme values of the function f(x, y, z) = x^2 + y^2 + z^2, x^2 + y^2 + z^2 + xy = 27 are minimum = 0 and maximum = 18

Given that

f(x, y, z) = x^2 + y^2 + z^2, x^2 + y^2 + z^2 + xy = 27

To find the extreme values of the function f(x, y, z) subject to the given constraint, we can use the method of Lagrange multipliers.

Defining the Lagrangian function L as follows:

L(x, y, z, λ) = f(x, y, z) - λ(g(x, y, z))

where g(x, y, z) is the constraint function and λ is the Lagrange multiplier.

In our case, we have:

f(x, y, z) = x^2 + y^2 + z^2

g(x, y, z) = x^2 + y^2 + z^2 + xy - 27

So, our Lagrangian function becomes:

L(x, y, z, λ) = x^2 + y^2 + z^2 - λ(x^2 + y^2 + z^2 + xy - 27)

To find the extreme values of f(x, y, z) subject to the constraint g(x, y, z) = 0, we need to solve the following system of equations:

∂L/∂x = 0

∂L/∂y = 0

∂L/∂z = 0

∂L/∂λ = 0

g(x, y, z) = 0

Taking the partial derivatives of L with respect to x, y, z, and λ, we get:

∂L/∂x = 2x - λ(2x + y) = 0

∂L/∂y = 2y - λ(2y + x) = 0

∂L/∂z = 2z - λz = 0

∂L/∂λ = x^2 + y^2 + z^2 + xy - 27 = 0

From the third equation, we get:

2z - λz = 0

z(2 - λ) = 0

So, either z = 0 or λ = 2.

If z = 0, then from the first two equations, we get:

2x - λy = 0

2y - λx = 0

Multiplying the first equation by y and the second equation by x, we get:

2xy - λy^2 = 0

2xy - λx^2 = 0

Subtracting the second equation from the first, we get:

λ(x^2 - y^2) = 0

Since λ cannot be zero, we have x^2 = y^2 and x = y

Similarly, if λ = 2, then from the first two equations, we get:

2x - 2y = 0

x = y

Substituting x = y into the constraint equation, we get:

2x^2 + x^2 = 27

x^2 = 9

x = ±3

So, the possible critical points are:

(3, 3, 0)

(-3, -3, 0)

(0, 0, 0)

Recall that

f(x, y, z) = x^2 + y^2 + z^2

So, we have

f(3, 3, 0) = 3^2 + 3^2 + 0^2 = 18

f(-3, -3, 0) = -3^2 + -3^2 + 0^2 = 18

f(0, 0, 0) = 0^2 + 0^2 + 0^2 = 0

Hence, the minimum is 0 and the maximum is 18

Read more about Lagrange multipliers at

https://brainly.com/question/10479355

#SPJ1

Surface area

2 triangles: Just do bh instead of 1/2bh, bh = 8 * 3 = 24

2 rectangles: 2bh but we first need to find h. The altitude pictured by dotted line, creates a right triangle where its hypotenuse is h. Since it also has side lengths 3 and 4, h = 5 (by pythag triplets). Then, 2bh = 2 * 12 * 5 = 120

base: bh = 12 * 8 = 96

Adding these areas we have 24 + 120 + 96 = 240

Volume: Bh (big b signifies area of the base)

B = area of the triangle = 1/2bh = 1/2 * 8 * 3 = 12

So Bh = 12 *12 = 144

Hope this helps you understand the process.

The probability that a randomly selected event of washing dishes will take a person between 12 and 15 minutes is 0.33 or 33%.

Uniform distribution is a probability distribution where all outcomes are equally likely. In this case, the time it takes to wash dishes is uniformly distributed between 8 and 17 minutes. This means that any time between 8 and 17 minutes is equally likely to occur.

To find the probability that a randomly selected event of washing dishes will take a person between 12 and 15 minutes, we need to find the area under the curve of the uniform distribution function between 12 and 15 minutes.

Since the distribution is uniform, the area under the curve between 12 and 15 minutes is simply the width of the interval divided by the total width of the distribution. Mathematically, we can express this as:

P(12 ≤ X ≤ 15) = (15 - 12) / (17 - 8)

P(12 ≤ X ≤ 15) = 3 / 9

P(12 ≤ X ≤ 15) = 0.33 or 33%.

To know more about probability here

https://brainly.com/question/11234923

#SPJ4

There is not enough evidence to suggest that the difference between the two population means is statistically significant at the 5% significance level.

To test the hypothesis that the difference between two population means is zero, the researcher can use a two-sample t-test. The test statistic is calculated as the difference between the sample means divided by the standard error of the difference.

In this case, the sample means are 106.4 and 99.2, and the standard error of the difference is 6.1. Therefore, the test statistic is (106.4 - 99.2) / 6.1 = 1.18.

To decide whether to reject the null hypothesis that the difference between the two population means is zero, the researcher needs to compare the test statistic to the critical value. The critical value needed to reject the null hypothesis at a 5% significance level with 2 degrees of freedom (n1 + n2 - 2 = 2) is 2.09.

Since the test statistic of 1.18 is less than the critical value of 2.09, the researcher fails to reject the null hypothesis.

To learn more about statistics click on,

https://brainly.com/question/14000767

#SPJ4

In linear equation, The actual height of the statue is 300 feet.

What in mathematics is a linear equation?

An algebraic equation with simply a constant and a first-order (linear) term, such as y=mx+b, where m is the slope and b is the y-intercept, is known as a linear equation. Sometimes, the aforementioned is referred to as a "linear equation of two variables," where x and y are the variables.  

                                  Equations with variables of power 1 are referred to as linear equations. One example with only one variable is where ax+b = 0, where a and b are real values and x is the variable.

A scale factor of a famous statue uses a scale factor of 250:1. If the height of the drawing is 1.2 feet, what is the actual height of the statue?

= 1.2 x 250

The actual height of the statue is 300 feet.

Learn more about linear equation

brainly.com/question/11897796

#SPJ1

Answer:(D) 300

Step-by-step explanation: the scale factor is 250:1 and the Hight of the drawing is 1.2 feet you need to multiply 1.2 by 250

1.2 x 250 = 300

The probability that outdoor equipment will meet all of their demand is 0.0478.

We are given that Outdoor equipment purchased 215 hydra insulated water bottles. The demand for the hydra water bottle is normally distributed with a mean of 150 and a standard deviation of 77.The formula for calculating the probability of demand can be given by: P(X ≤ 215)P(X ≤ 215) is the probability of selling all 215 water bottles.

It means that they will sell a maximum of 215 bottles. The probability of selling less than or equal to 215 bottles is calculated as: P(X ≤ 215)=P(Z ≤ (215 - 150)/77)=P(Z ≤ 0.844).

Therefore, P(X ≤ 215) = 0.8023P(X ≤ 215) = 0.8023P(X = 215) is calculated as: P(X = 215) = P(X ≤ 215) - P(X ≤ 214). Therefore, P(X = 215) = 0.8023 - P(Z ≤ (214.5 - 150)/77)= 0.8023 - 0.7545 = 0.0478.

Therefore, the probability that outdoor equipment will meet all of their demand is 0.0478.

To know more about probability refer here:

https://brainly.com/question/11234923

#SPJ11

Answer:

Since the decoration is in the shape of a triangle, we can use the formula for the area of a triangle to solve for its height. The area of a triangle is given by:

Area = (1/2) x base x height

Let's call the height of the decoration h. We know that the base after firing is 9 inches, so we can plug in the given values and solve for h:

Area = (1/2) x 9 x h

Area = 4.5h

We don't know the exact area of the decoration, but we do know that the decoration maintains its shape after firing. This means that the ratio of the areas before and after firing is the same, and so is the ratio of the heights and bases. Since the height and base are proportional, we can write:

h / 15 = 9 / 10

Simplifying the equation, we get:

h = (9/10) x 15

h = 13.5

Therefore, the height of the finished decoration is 13.5 inches.

Answer:no

Step-by-step explanation:

using the Pythagorean theorem:

a^2+b^2=c^2

42^2+26^2=50^2

1764+676=2500

2440=2500

2440<2500

So the answer is no

Answer:

C is the correct function.

The decision that most clearly reflects a lack of understanding of the concept of sunk costs is "You study eight hours for a final exam even though there is no way now that you can pass the course".

Sunk costs refer to any costs that have already been incurred and cannot be recovered. Sunk costs are irrelevant in decision-making because they are already gone and cannot be recovered. Decision-makers must only consider future costs and benefits when making decisions.

A lack of understanding of sunk costs may result in individuals making decisions based on past costs rather than future costs and benefits. Decision-making that is influenced by sunk costs may result in inefficient resource allocation and lost opportunities.

Individuals must ignore sunk costs and instead focus on future costs and benefits to make effective decisions.

In the given options, "You study eight hours for a final exam even though there is no way now that you can pass the course" is the decision that most clearly reflects a lack of understanding of the concept of sunk costs.

Even though the student has already spent 8 hours studying, the sunk costs are irrelevant because the student cannot pass the course now. The student should focus on future costs and benefits and use the remaining time to study for other courses.

To know more about sunk costs:

https://brainly.com/question/29488541

#SPJ11

On a control chart, Control limits separates common from assignable causes of variation option C.

Shewhart charts, after Walter A. Shewhart, are another name for control charts. It is a statistical process control tool that aids in tracking process advancements over time. For instance, hospital management decides to utilise a solution technique in order to shorten the time required to admit a patient.

The process flow diagram for how patients are admitted to the hospital is first created. The average amount of time it takes to admit a patient each day is then measured. Lastly, plot the process variables across time on a control chart.

This control chart's goals are to identify any "special" reasons of variation as well as to document any process improvements.

Learn more about Control limits:

https://brainly.com/question/23821364

#SPJ4

{x | x ∈ R, x < 5} would have a graph with an open circle on 5 and a ray pointing left on the number line.

In interval notation, the set {x | x R, x < 5} can be written as (-∞, 5). The symbol (-∞) represents negative infinity, which means all numbers less than any finite number.

So, the interval (-∞, 5) includes all real numbers less than 5, but does not include 5 itself.

To graph this set on a number line, we would draw an open circle at the point 5, because 5 is not included in the set. Then, we would draw a ray pointing to the left, because the set includes all numbers less than 5.

The ray extends indefinitely to the left, because there is no greatest number that is less than 5.

Therefore, the graph of the set {x | x R, x < 5} on a number line would have an open circle at 5 and a ray pointing to the left.

What does an open circle on a number line indicate?

An open circle on a number line indicates that the number is not included in the set.

To know more about Open Circle visit

brainly.com/question/30034329

#SPJ1

The number that goes to column D is the total equity of $825.

Using annual rate of return APR:

A = P *[tex](1 + r/n)^{nt}[/tex]

P = $750.

r = 10%

t = 1 year

n = 1

A = 750 * [tex](1 + 0.1/1)^{1*1}[/tex]

A = 750 * 1.1

A = 825

Thus, the number that goes to column D is the total equity of $825.

know more about the annual rate of return

https://brainly.com/question/18234486

#SPJ1

The scores on the math portion of the SAT are roughly normally distributed, with a mean of 500 and a standard deviation of 100. Approximately 95% of scores lie within two standard deviations of the mean, which is between 300 and 700.

To calculate this, we need to know that 68% of scores lie within one standard deviation of the mean, and 95% of scores lie within two standard deviations of the mean. To calculate the two standard deviations from the mean, we must use the equation (x + 2σ) and (x - 2σ). The 'x' in this equation is the mean, and the 'σ' is the standard deviation. Plugging in the values, we get: (500 + 2(100)) = 700 and (500 - 2(100)) = 300. Therefore, approximately 95% of scores on the math portion of the SAT lie between 300 and 700.

See more about deviation at: https://brainly.com/question/28986847

#SPJ11

The total number of cups of dried fruit Lucas need for his one dozen snacks are 3 cups of dried cherries and 6 cups of dried apricots

Cups used of dried cherries = 1/4

Cups used of dried apricots = 2/4

An element of a number or any number of equal pieces is represented by a fraction. A fraction with a numerator and denominator exists.

Lucas is making one dozen snacks, which means the total number of snacks made is = 12.

Calculating the total amount of dried cherries -

= 1/4 cup/serving x 12 servings

= 3 cups of dried cherries

Similarly,

Calculating the total amount of dried apricots -

1/2 cup/serving x 12 servings

= 6 cups of dried apricots

Read more about fractions on:

https://brainly.com/question/78672

#SPJ4

When Will ran around the track 12 times, he ran a total distance of 12 x 0.25 = 3 miles. The answer is 3 miles.

The lap is the total distance a runner has to cover to complete one full circuit of the track. Depending on the size of the track, the lap distance can vary.

In the case of Will, he ran a total of 12 laps of a track that was 1/4 of a mile long.

This means that he ran a total distance of 12 x 0.25 = 3 miles.

This is because 1/4 of a mile is equal to 0.25 miles.

The equation used to calculate the total distance run by Will is: Distance = Number of laps x Length of each lap.

This equation can be used to calculate the total distance run by any runner on any track of any length.

For more questions related to track

https://brainly.com/question/27525473

#SPJ1

Therefore, the 95% confidence interval for the population standard deviation is approximately (2.6, 12.3).

To construct a 95% confidence interval for the population standard deviation, we will use the chi-square distribution. Here are the steps:

Step 1: Identify the given values.
n = 5 (sample size)
s = 4.4 (sample standard deviation)
c = 0.95 (confidence level)

Step 2: Find the degrees of freedom.
df = n - 1 = 5 - 1 = 4

Step 3: Find the chi-square values.
For a 95% confidence interval, we will use the values corresponding to 2.5% and 97.5% in the chi-square distribution table. For df = 4:
Chi-square (0.025) = 11.143
Chi-square (0.975) = 0.485

Step 4: Calculate the confidence interval for the population variance.
Lower limit:[tex] (n - 1) * s^2 / Chi-square (0.025) = 4 * (4.4)^2 / 11.143 = 6.960[/tex]
Upper limit:[tex] (n - 1) * s^2 / Chi-square (0.975) = 4 * (4.4)^2 / 0.485 = 151.977[/tex]

Step 5: Calculate the confidence interval for the population standard deviation by taking the square root of the variance limits.
Lower limit: [tex]√6.960 = 2.6[/tex]
Upper limit:[tex] √151.977 = 12.3[/tex]

for such more questions on standard deviation

https://brainly.com/question/475676

#SPJ11

Answer:

[tex]26a - 10 = 2(13a - 5)[/tex]