In an aqueous solution of magnesium bromide, the solute is

Answers

Answer 1

In an aqueous solution of magnesium bromide, the solute is magnesium bromide and the solvent is water.

Aqueous solution of magnesium bromide

The solute in an aqueous solution of magnesium bromide is the solid material, in this case magnesium bromide, dissolved in a liquid, which is the solvent. In this case, the solvent is water. Water is an excellent solvent because of its ability to form hydrogen bonds with other molecules, which allows it to dissolve many different substances.

In addition, it is a polar molecule, meaning that one end of the molecule has a slightly positive charge while the other end has a slightly negative charge. This polarity allows water molecules to interact with molecules of other substances, including magnesium bromide, which is also a polar molecule, allowing it to dissolve in the water.

The interaction between the polar water molecules and the polar magnesium bromide molecules causes the magnesium bromide to break up into its component ions, forming a solution. The ions are then surrounded by water molecules, which keeps them in solution until the solution is evaporated.

Learn more about magnesium bromide here:

https://brainly.com/question/11050230

#SPJ1


Related Questions

what is sucrose particle type​

Answers

Answer: Sucrose is a glycosyl glycoside formed by glucose and fructose units joined by an acetal oxygen bridge from hemiacetal of glucose to the hemiketal of the fructose.

Explanation:

which statement describes density? Check all that apply

Density is a chemical property of an object.

The density of an object is constant.

Density is a derived unit of measure.

Density is the sum of the mass and volume of an object.

The density of an object determines whether it will sink or float.

Answers

Answer:

The density of an object is constant.

Density is a derived unit of measure.

The density of an object determines whether it will sink or float.

an ideal gas has a volume of 3.0 L is the number of moles of gas in the temperature of doubled while the pressure remains constant. What is the new volume?

Answers

Answer:

At a temperature of 300K, a gas has a volume of 3.0 L. If we double the temperature to 600K, the volume will increase to 6.0 L. However, the pressure will remain the same at 1 atm. Therefore, the new volume is 6.0 L x 1 atm = 6.0 L

superstition can only be used to explain rogue waves in what types of water

Answers

Answer: calm water.

Explanation:

Sheila spilled tea on her notes and is now unable to read some words.
What is the correct title for this section of Sheila's notes?
Volume
Density
Weight
Mass

Answers

Based οn the wοrds prοvided, a pοssible title fοr this sectiοn οf Sheila's nοtes cοuld be Mass.

What are Prοperties οf Matter in chemistry?

In chemistry, prοperties οf matter refer tο the characteristics οr attributes that can be used tο describe and identify a substance. These prοperties can be divided intο twο categοries: physical prοperties and chemical prοperties.

Physical attributes are thοse that can be examined οr measured withοut changing the substance's makeup. Mass, vοlume, density, cοlοr, melting pοint, bοiling temperature, and sοlubility are examples οf physical qualities.

Chemical prοperties, οn the οther hand, describe hοw a substance interacts with οther substances tο prοduce new substances.

Understanding the prοperties οf matter is impοrtant in chemistry because it allοws scientists tο identify and classify different substances based οn their unique characteristics. This knοwledge can alsο be used tο predict hοw substances will behave under different cοnditiοns and tο design new materials with specific prοperties fοr variοus applicatiοns.

To learn more about Density, visit:

https://brainly.com/question/26364788

#SPJ1

Complete question:

Sheila spilled tea on her notes and is now unable to read some words.

What is the correct title for this section of Sheila’s notes?

Volume Density Weight Mass

As cocentration increases the vapor pressure does

Answers

As the concentration of a solution increases, the vapor pressure decreases.

What is Raoult's law ?

Raoult's law states that the vapor pressure of a solution is proportional to the mole fraction of the solvent present in the solution.

When a solute is added to a solvent, it reduces the mole fraction of the solvent, and therefore the vapor pressure of the solution decreases. This is because the solute molecules occupy space on the surface of the solution, which reduces the number of solvent molecules that can escape into the gas phase, and thus reduces the vapor pressure of the solution.

Learn about Raoult's law here https://brainly.in/question/20638847

#SPJ1

Complete question:

As the concentration of a solution increases, the vapor pressure _____

How many moles of MgS are in 100.g MgS?

Answers

The number or amount of moles of magnesium sulfide in 100g of MgS is 1.774 moles.

How to calculate number of moles?

The number of moles in a substance can be calculated by dividing the mass of the substance by its molar mass as follows:

Mole is the base unit of amount of substance i.e. the amount of substance of a system which contains exactly 6.02214076 × 10²³ elementary entities.

no of moles = mass ÷ molar mass

According to this question, 100g of magnesium sulfide is given. The molar mass of magnesium sulfide is 56.38 g/mol.

moles = 100g ÷ 56.38g/mol

moles = 1.774 moles

Learn more about moles at: https://brainly.com/question/26416088

#SPJ1

Create a “Chemical Reaction Poster” that will summarize key concepts about chemical reaction. In your poster, include
Definition of chemical reaction and balanced equation
Steps in balancing chemical equation and an example
Types of chemical reaction and an example for each
Picture/images related to chemical reaction
Other related information
Rubric:
Content ……………………25 points
Organization ……….… 25 points
Neatness/Creativity... 15 points

please help so it can bring my grade up
thank you soo much
project*

Answers

Answer:

Ca²+O²

Explanation:

The Ca gives out 2 electrons and oxygen gains 2 elctrons

What happens to the solubility of gases in water as pressure increases?

Question 9 options:

solubility increases so less solute dissolves


solubility decreases so more solute dissolves


solubility increases so more solute dissolves


solubility decreases so less solute dissolves

Answers

Answer: Solubility increases so more solute dissolves

Explanation:

The solubility is a measure of the concentration of the dissolved gas particles in the liquid and is a function of the gas pressure. As you increase the pressure of a gas, the collision frequency increases and thus the solubility goes up, as you decrease the pressure, the solubility goes down.

The mass of a hydrate is 12.75g. The hydrate is heated and the resulting mass of the
anhydrate is 9.87g. Calculate the experimental percentage of water by mass.

Answers

The experimental percentage of water by mass, given that the hydrate is heated and it produces 9.87 g of anhydrous, is 22.6%

How do i determine the experimental percentage of water?

First, we shall determine the mass of the water in the hydrate. Details below:

Mass of hydrate = 12.75 gMass of anhydrous = 9.87 gMass of water = ?

Mass of water = Mass of hydrate - Mass of anhydrous

Mass of water = 12.75 - 9.87

Mass of water = 2.88

Finally, we shall determine the experimental percentage of water by mass. Details below:

Mass of water = 2.88Mass of hydrate = 12.75 gExperimental percentage of water =?

Experimental percentage of water = (mass of of water / mass of hydrate) × 100

Experimental percentage of water = (2.88 / 12.75) × 100

Experimental percentage of water = 22.6%

Learn more about percentage composition:

https://brainly.com/question/11952337

#SPJ1

An isotope of hydrogen, known as Tritium (hydrogen-3), has a half-life of 12 years. If a sample of tritium was prepared 60 years ago, what was its original mass if its current mass is 0.42 micrograms?

Options for answers:
a.) 1.7mg b.) 13.4mg c.) 6.7mg d.) 26.8mg e.) 3.4mg

Answers

The original mass of Tritium (hydrogen-3) was 13.4mg if its current mass is 0.42 micrograms.

The formula for radioactive decay is given by:

N = N0 x (1/2)^(t/T)

where,

N = final number of radioactive atoms

N0 = initial number of radioactive atoms

t = time elapsed

T = half-life of the radioactive substance

Let's substitute the given values into the formula:

0.42 μg = N0 x (1/2)^(60/12)

0.42 μg = N0 x (1/2)^5

0.42 μg = N0 x 1/32

N0 = 0.42 μg x 32

N0 = 13.44 μg

Therefore, the original mass of the tritium sample was 13.44 micrograms.

What is radioactive decay?

Radioactive decay is the process by which an unstable atomic nucleus loses energy by emitting ionizing radiation, such as alpha particles, beta particles, and gamma rays. This process can result in a change in the number of protons and/or neutrons in the nucleus, leading to the transformation of one element into another. The rate of decay is typically characterized by a half-life, which is the time required for half of the atoms in a sample to decay.

To know more about radioactive decay, visit:

https://brainly.com/question/1770619

#SPJ1

If you are relating the levels of organization of the human body to the levels of organization of a city, what would you relate cells to? what would you relate the other levels to?.

Answers

The basic units of the human body are called cells, and they carry out specialized tasks to keep the body alive. Cells in a city might be compared to people who perform particular duties and contribute to the general efficiency of the city.

How do you think the degrees of organization in the human body compare to those in the world?

Organizational hierarchy is built up from lower levels. Consequently, molecules combine to create molecules, molecules create cells, cells create tissues, tissues create organs, organs create organ systems, and organ systems create beings. The body's next level of organisation. A tissue is made up of related cells with a common purpose. Human tissues can be divided into four categories: epithelial, muscular, nerve, and connective.

How are the human body's structure and function organized, from the simplest to the most complex?

The major levels of organisation in the body, from the most basic to the most complex, are atoms, molecules, organelles, cells, tissues, organs, organ systems, and the human body.

To know more about  human body visit:-

brainly.com/question/14289599

#SPJ9

I will give brainly IF CORRECT.

What describes an electrolyte?

Question 1 options:

Substances that prohibit electricity from traveling across a solvent


Substance that gives out ions when dissolved in water, which are able to conduct electricity


A chemical used to combust flames in a laboratory setting


A type of current that is utilized to determine if there is a blockage anywhere in the system

Answers

Substance that gives out ions when dissolved in water, which are able to conduct electricity describes an electrolyte.

A sample of gas is in a container with a movable piston. The volume in the container is originally 850 ML at a temperature of 467K and a pressure of 11 point 4K PA. What will the new temperature if the volume is expanded to 1125 in El with a new pressure of 99.7 K PA?

Answers

If the volume is increased to 1125 in El with a new pressure of 99.7 K PA, the new temperature will be around 808 K.

What transpires to the gas volume in a moveable piston cylinder?

Once the piston's pressure has doubled, it goes downward until the gas's pressure and the piston pressure are equal. The gas has now lost half of its original volume. The volume of gas falls to one-fourth of its initial volume if the pressure on the piston is once more increased by a factor of two.

This issue can be resolved using the coupled gas law:

(P1V1) / T1 = (P2V2) / T2

Using the following conversions, we can first change the starting volume to litres and the original pressure to atmospheres (atm):

1 mL = 0.001 L

1 kPa = 0.00987 atm

V1 = 850 mL = 0.85 L

P1 = 11.4 kPa = 0.1126 atm

T1 = 467 K

The new volume and pressure can also be converted to litres and atmospheres:

V2 = 1125 mL = 1.125 L

P2 = 99.7 kPa = 0.984 atm

Now we can plug in the values and solve for T2:

(P1V1) / T1 = (P2V2) / T2

(0.1126 atm * 0.85 L) / 467 K = (0.984 atm * 1.125 L) / T2

T2 = (0.984 atm * 1.125 L * 467 K) / (0.1126 atm * 0.85 L)

T2 = 808 K

To know more about temperature visit:-

https://brainly.com/question/13294753

#SPJ1

Answer:

548 K

I hope this helps! Cheers ^^

uestion 8 Calculate the percentage by mass of hydrogen in PtCl2(NH3)2 A. 1.558 B. 1.008 c.0.672 D. 0.034 E.2.016​

Answers

The percentage by mass of hydrogen can be calculated from the problem as 2.016

How do you calculate the mass percent of an atom in a  compound?

To calculate the mass percent of an atom in a compound, you first need to determine the molar mass of the compound and the molar mass of the atom of interest.

Determine the molar mass of the compound by adding up the atomic masses of all the atoms in the compound.

Determine the number of moles of the atom of interest in one mole of the compound. This is done by dividing the atomic mass of the atom by the molar mass of the compound.

We know that the relative molecular mas of the compound is; 300 g/mol

Then;

Percent by mass of hydrogen is; 6/300 * 100/1

= 2.016%

Learn more about percent by mass:https://brainly.com/question/5394922

#SPJ1

5. The average human requires .66 moles of glucose (C6H1206) per day. How many mole
of CO2 (in the photosynthesis reaction) are required for this amount of glucose? The
photosynthetic reaction is: 6 CO2 + 6 H₂O ---> C6H12O6 + 6 02

Answers

Answer: 3.96 moles of CO2 are required in the photosynthesis reaction.

Explanation: The balanced equation for photosynthesis tells us that for every mole of glucose produced, 6 moles of CO2 are required. Therefore, to determine how many moles of CO2 are required for 0.66 moles of glucose, we can set up a proportion:

6 moles CO2 / 1 mole glucose = x moles CO2 / 0.66 moles glucose

Solving for x, we get:

x = (6 moles CO2 / 1 mole glucose) x (0.66 moles glucose / 1) = 3.96 moles CO2

Therefore, to produce 0.66 moles of glucose, 3.96 moles of CO2 are required in the photosynthesis reaction.

!!(100 points)!! What is a valence electron? Which elements on the periodic table have the most valence electrons?

Answers

Answer:

sulphur has the most valence electron

Answer:

[tex]valence \: electrons \: are \: the \\ electrons \: in \: the \: outermost \\ shell \: or \: energy \: level \: of \: an \: \\ atom. [/tex]

cyclohexene and sulfric acid reaction

Answers

Cyclohexene and sulfuric acid can react to form a cyclic carbonium ion intermediate, which can then undergo various reactions.

What is the product of the reaction?

One common reaction is the addition of a nucleophile, such as water or an alcohol, to form an alcohol product. This reaction is often referred to as acid-catalyzed hydration.

The general reaction mechanism can be summarized as follows:

Protonation of the alkene: The sulfuric acid protonates the alkene double bond, creating a more electrophilic carbocation intermediate.

Formation of a cyclic carbonium ion: The positive charge is then delocalized throughout the cyclohexene ring, forming a cyclic carbonium ion intermediate.

Addition of a nucleophile: A nucleophile, such as water, can then attack the carbon atom of the carbonium ion, forming a new bond and creating an alcohol product.

The overall reaction can be written as follows:

Cyclohexene + H2SO4 + H2O → Cyclohexanol + HSO4-

Learn more about reaction:https://brainly.com/question/28984750

#SPJ1

If I have 4 moles of a gas pressure of 5.6 atm and a volume of 12 liters what is the temperature

Answers

Answer: 204.63 K

Explanation:

Ideal gas law

Pv=nRT

T=PV/nR

T= 5.6 X 12/(4 x0.0821)= 204.63 K

R= ideal gas constant = 0.0821

What is the percent of H in
Ca(С2H302)2?
(Ca = 40.08 g/mol, C = 12.01 g/mol,
H= 1.01 g/mol, O = 16.00 g/mol)

Answers

Answer:

3.8%

Explanation:

Ca × 1 = 50

C ×4 = 48

H × 6 = 6

O × 4 = 64

158

6÷158×100% = 3.8%

Conservation of Mass In chemical reactions, mass is neither gained nor lost. The total mass of all the reactants equals the total mass of all the products. Atoms are just rearranged into different compounds. Using this idea, solve the following problems. 1. 2KCIO3 2KCI+ 30₂ If 500 g of KCIO, decomposes and produces 303 g of KCI, how many grams of O₂ are produced? 2. N₂ + 3H₂ 2NH3 How many grams of H₂ are needed to react with 100 g of N₂ to produce 121 g of NH₂? 3. 4Fe +30₂ 2Fe₂O3 How many grams of oxygen are needed to react with 350 g of iron to produce 500 g of Fe₂O3? 4. CH₂ + 20₂2 CO₂ + 2H₂O 16 g of CH₂ react with 64 g of O₂, producing 44 g of CO₂ How many grams of water are produced? 5. CaCO3 Cao + CO, How much CO, is produced from the decomposition of 200 g of CaCO, if 112 g of CaO are produced?​

Answers

Answer:

1. The balanced equation is 2KCIO3 → 2KCI + 3O2. According to the law of conservation of mass, the mass of the reactants must equal the mass of the products. Therefore, the mass of oxygen produced is:

Mass of oxygen = Mass of KCIO3 - Mass of KCI

Mass of oxygen = 500 g - 303 g

Mass of oxygen = 197 g

Therefore, 197 g of O2 are produced.

2. The balanced equation is N2 + 3H2 → 2NH3. We need to find out how much H2 is needed to react with 100 g of N2 to produce 121 g of NH3. First, we need to calculate the number of moles of N2 and NH3:

Moles of N2 = Mass of N2 / Molar mass of N2

Moles of N2 = 100 g / 28 g/mol

Moles of N2 = 3.57 mol

Moles of NH3 = Mass of NH3 / Molar mass of NH3

Moles of NH3 = 121 g / 17 g/mol

Moles of NH3 = 7.12 mol

According to the balanced equation, 1 mole of N2 reacts with 3 moles of H2 to produce 2 moles of NH3. Therefore, the number of moles of H2 needed is:

Moles of H2 = Moles of N2 x (3/1)

Moles of H2 = 3.57 mol x 3

Moles of H2 = 10.71 mol

Finally, we can calculate the mass of H2 needed:

Mass of H2 = Moles of H2 x Molar mass of H2

Mass of H2 = 10.71 mol x 2 g/mol

Mass of H2 = 21.42 g

Therefore, 21.42 g of H2 are needed.

3. The balanced equation is 4Fe + 3O2 → 2Fe2O3. We need to find out how much oxygen is needed to react with 350 g of Fe to produce 500 g of Fe2O3. First, we need to calculate the number of moles of Fe and Fe2O3:

Moles of Fe = Mass of Fe / Molar mass of Fe

Moles of Fe = 350 g / 55.85 g/mol

Moles of Fe = 6.26 mol

Moles of Fe2O3 = Mass of Fe2O3 / Molar mass of Fe2O3

Moles of Fe2O3 = 500 g / 159.69 g/mol

Moles of Fe2O3 = 3.13 mol

According to the balanced equation, 4 moles of Fe react with 3 moles of O2 to produce 2 moles of Fe2O3. Therefore, the number of moles of O2 needed is:

Moles of O2 = Moles of Fe x (3/4)

Moles of O2 = 6.26 mol x (3/4)

Moles of O2 = 4.69 mol

Finally, we can calculate the mass of O2 needed:

Mass of O2 = Moles of O2 x Molar mass of O2

Mass of O2 = 4.69 mol x 32 g/mol

Mass of O2 = 150.08 g

Therefore, 150.08 g of O2 are needed.

4. The balanced equation is CH2 + 2O2 → CO2 + 2H2O. We know that 16 g of CH2 reacts with 64 g of O2 to produce 44 g of CO2. We need to find out how much water is produced. First, we need to calculate the number of moles of CH2 and CO2:

Moles of CH2 = Mass of CH2 / Molar mass of CH2

Moles of CH2 = 16 g / 14 g/mol

Moles of CH2 = 1.14 mol

Moles of CO2 = Mass of CO2 / Molar mass of CO2

Moles of CO2 = 44 g / 44 g/mol

Moles of CO2 = 1 mol

According to the balanced equation, 1 mole of CH2 reacts with 2 moles of O2 to produce 2 moles of H2O. Therefore, the number of moles of H2O produced is:

Moles of H2O = Moles of CH2 x (2/1)

Moles of H2O = 1.14 mol x 2

Moles of H2O = 2.28 mol

Finally, we can calculate the mass of H2O produced:

Mass of H2O = Moles of H2O x Molar mass of H2O

Mass of H2O = 2.28 mol x 18 g/mol

Mass of H2O = 41.04 g

Therefore, 41.04 g of H2O are produced.

5. The balanced equation is CaCO3 → CaO + CO2. We need to find out how much CO2 is produced from the decomposition of 200 g of CaCO3 if 112 g of CaO are produced. First, we need to calculate the number of moles of CaCO3 and CaO:

Moles of CaCO3 = Mass of CaCO3 / Molar mass of CaCO3

Moles of CaCO3 = 200 g / 100.09 g/mol

Moles of CaCO3 = 1.999 mol

Moles of CaO = Mass of CaO / Molar mass of CaO

Moles of CaO = 112 g / 56.08 g/mol

Moles of CaO = 1.999 mol

According to the balanced equation, 1 mole of CaCO3 produces 1 mole of CaO and 1 mole of CO2. Therefore, the number of moles of CO2 produced is:

Moles of CO2 = Moles of CaCO3 x (1/1)

Moles of CO2 = 1.999 mol

Finally, we can calculate the mass of CO2 produced:

Mass of CO2 = Moles of CO2 x Molar mass of CO2

Mass of CO2 = 1.999 mol x 44 g/mol

Mass of CO2 = 87.96 g

Therefore, 87.96 g of CO2 are produced.

How many liters of a 3.58 MK2SO4 solution are needed to provide 85.1 g of K2SO4 (molar mass 174.01g/mol)? Recall that M is equivalent to mol/L.

Answers

Answer:  The amount  of volume needed is  0.09L

Explanation:

glucose molecule starch molecule protein molecule carbon dioxide molecule water molecule amino acid molecule 1. In the space below, list the molecules in order from smallest to largest. oxygen molecule

Answers

Answer:

oxygen molecule, water molecule, glucose molecule, amino acid molecule, carbon dioxide molecule, protein molecule, starch molecule.

Explanation:

Which emission spectrum represents the copper?

A.) Spectrum A
B.) Spectrum B
C.) Spectrum C​​

Answers

Answer:b

Explanation:i just did it

A hot air balloon has a volume of 3100 m to the third at 91 degrees Celsius what is the volume if the air cools to 86 degrees Celsius

Answers

answer: 3057.44 m^3

Explanation:

This is Charles Law which is V1/T1=V2/T2  and temp must be in kelvin

So v2=V1 x T2/T1

v2= 3100 X 359.15 / 364.15  = 3057.44 m^3

t1= 91 +273.15 = 364.15

t2=86+273.15 =359.15

50 points
Problem 1. What masses of 15% and 20% solutions are needed to prepare 200 g of 17% solution?
Problem 2. What masses of 18% and 5% solutions are needed to prepare 300 g of 7% solution?
Problem 3. 200 g of 15% and 350 g of 20% solutions were mixed. Calculate mass percentage of final solution.
Problem 4. 300 g of 15% solution and 35 g of solute were mixed. Calculate mass percentage of final solution.
Problem 5. 400 g of 25% solution and 150 g of water were mixed. Calculate mass percentage of final solution.

Answers

80 g of 15% solution and 120 g of 20% solution are needed to prepare 200 g of 17% solution.

What is Mass Percentage?

Mass percentage is the percentage of the mass of the solute in a solution to the total mass of the solution. It is calculated by dividing the mass of the solute by the total mass of the solution and multiplying by 100%. The mass percentage is often used in chemistry to express the concentration of a solution.

Let x be the mass of the 15% solution needed and y be the mass of the 20% solution needed to prepare 200 g of 17% solution. Then we have the system of equations:

x + y = 200 (total mass of the solution)

0.15x + 0.20y = 0.17(200) (total amount of solute in the solution)

Solving for x and y, we get:

x = 80 g of 15% solution

y = 120 g of 20% solution

Therefore, 80 g of 15% solution and 120 g of 20% solution are needed to prepare 200 g of 17% solution.

Learn more about Mass Percentage from given link

https://brainly.com/question/26150306

#SPJ1

With 14 liters of loratadine we can fill 135 bottles. How many milliliters of loratadine are needed to fill 106 bottles

Answers

It will take about 10990 milliliters to fill 106 vials of loratadine.

Rule of three in Chemistry

Based on the information in the statement, to obtain the number of milliliters needed to fill 106 vials of loratadine, just construct the following simple rule of three:

14 liters of loratadine - 135 vials

x liters of loratadine - 106 vials

14 * 106 = 135x

1484 = 135x

x ≅ 10.99 liters of loratadine (value rounded to two decimal places).

Note, however, that the statement asks for the volume of loratadine in milliliters. To convert from liters to milliliters, just multiply the value obtained by above 1000:

10.99 * 1000 = 10990 milliliters.

What is the Percentage of Fluorine as F- in a HF (pKa= 3.33 ) solution at pH= 2.33?

Answers

Answer: The percentage of fluorine as F- in a HF solution at pH 2.33 is 9.09%.

A balloon held at 273 K has an initial volume of 2.0 L at 1.0 atm of pressure. If the pressure is increased to 3.5 atm, what is the new volume of the balloon?

Answers

Answer: 5.5 atm

Explanation:

pls help!!
Which statement best describes the difference between speed and velocity?

A.
Velocity is plotted on the x-axis of a graph and speed is plotted on the y-axis.

B.
Velocity is related to position but speed is not.

C.
Velocity does not depend on time but speed does.

D.
Velocity has a specific direction but speed does not.

Answers

Answer:

option a

Velocity is plotted on the x-axis of a graph and speed is plotted on the y-axis.

Other Questions
Compared to the rest of Latin America, Why did Brazil have a relatively smooth transition to independence? (Blood and Fire quiz)Please answer asap!! will give brainliest!! when response optons to closed-ended questions asked in an interview are lengthy or complex what might the interviewer use? what is the name of the mechanism used by tcp to increase and decrease the number of segments that are sent between each other before an acknowledgment is required? Discuss how one can use his innovating skills to become a successfully intrepreneur In this question, youll set up your program with the general structure and canvas layout that you need, and startby converting any number from 0 to 9 (1 digit) into Cistercian numerals.The program should initially prompt the user to enter a number that will be converted. For this question, you canassume that only numbers 0 to 9 will be entered. To use the input dialog, you must addimport javax. swing.JOptionPane;as the very first line in your program. Then, when you want to obtain user input, a line of code such asuser text = JOptionPane.show an input dialog("Please enter text:");will display the dialog. The String parameter contains the text displayed for the user, and a String is returned. Thereturned String should be stored for converting the number. You mustn't convert the Stringinto an int or other number format, this is particularly important when you get to Q3.Once the program accepts the input, it must convert the number into a Cistercian numeral. To start, youll draw anempty, vertical stave taking up most of the canvas (looks like 0, below). Then, depending on the number that wasentered, you must draw one or two strokes off the stave that represents the number, as follows:(emptystave)0 1 2 3 4 5 6 7 8 9Your code should follow these requirements: Avoid duplicating code. Note that there are only five types of strokes,and some glyphs use a combination of strokes: use this to youran advantage to shorten your code. If you are careful every one of yourlines of code will be doing something different, you will not have anyduplicate code. Again, avoid duplicating code. You can assume that the strokes allhave their endpoints at the corners of an invisible square: two pointsare on the stave, two are off the stave, and all points are equidistant.If you store these four points somewhere, you should be able to usethem to draw any stroke you want with minimal effort. Keep in mind that you are storing the input number as a String, so you should be comparing it to chars ofdigits (e.g., 1, not 1). Hint: You do not need to use functions for each individual digit/stroke! If you do, you may run intoproblems with Q2 and Q3, unless you read Unit 14, which is about functions (Week 9).In addition to drawing the glyph, your canvas should display the original number, contain a button that will ask the user for new input, and erase the existing number and glyph(s) (this will also be useful to youwhen testing different numbers). Make changes to default parameters to make the output more appealing (e.g.,background color, text color, glyph color, stroke widths...). assume the same facts, except that the $8,400 is for 24 months' rent ending march 31, 2023. how much is shanna's deduction for rent expense in 2021? which of the following sought to address the great depression by reducing production? responses the reconstruction finance corporation the reconstruction finance corporation the national labor relations act the national labor relations act the civilian conservation corps the civilian conservation corps the glass-steagall act the glass-steagall act the agricultural adjustment act PLEASE HELP - WORTH 30 POINTS 5. MALCONTENT: COMPLAINSa) learns: studentb) philanthropist : stealsc) hero: cowersd) supporter: encourages firms often consolidate industries through horizontal mergers and acquisitions to multiple choice increase their market power. motivate managers. solve principal-agent problems. lower their stock prices. How christoff rudolff inspire the generation? a linear a tetrahedrala bent a square planara trigonal planar an octahedral a seesaw a trigonal bipyramidal In structure (a), four pairs of electrons give ___ electron geometry. The lone pair would a trigonal pyramidal cause lone pair-bonded pair repulsions and would have __ molecular geometry. In structure (b), five pairs of electrons give ___electron geometry. The lone pair occupies an equatorial position to minimize lone pair-bonded pair repulsions, and the molecule would have ___ molecular geometry. In structure (c), six pairs of electrons give __ electron geometry. The two lone pairs would occupy opposite positions to minimize lone pair-lone pair repulsions, and the molecule would have ___ molecular geometry. what is the specific receptor site on the host cell that the virus needs to attach and infect? TRUE/FALSE. listening to something vulgar or immoral, or watching something sexually explicit over and over again, causes a person to become desensitized to it. a simplistic and somewhat controversial formula to describe cross cultural influences in emergence of rock 'n' roll: Please help I need this answer!! Ill mark brainiest!! a pregnant woman is diagnosed with placental abruption (abruptio placentae). when reviewing the woman's physical assessment in her medical record, which finding would the nurse expect? whitewater rapids provides canoes to tourists eager to ride whitewater river's rapids. management has determined that there is one chance in a thousand of a customer being injured or killed. settlement of resulting lawsuits has an average cost of $850,000. insurance with a $100,000 deductible is available. it covers the costs of lawsuits, unless there is evidence of criminal negligence. based on cost-benefit analysis, what is the most that the business should pay for the insurance? Part CSolve the equation for c, which is the length of line segment GH. If the number under the radical is not a perfect square, leave the answer as asquare root. If you can read and write music you can speak