I need help with this ty

the pressure of the water after the contraction is -50000 Pa (or 50 kPa below atmospheric pressure), and the velocity of the water after the contraction is 15.0 m/s.

The continuity equation states that the product of the cross-sectional area and the velocity of an incompressible fluid is constant along a pipe, so we can use it to relate the pressure and velocity before and after the contraction:

A₁v₁ = A₂v₂

where A₁ and v₁ are the area and velocity of the pipe before the contraction, and A₂ and v₂ are the area and velocity of the pipe after the contraction.

We can also use the Bernoulli equation, which relates the pressure and velocity of a fluid along a streamline:

P₁ + 1/2 ρv₁² = P₂ + 1/2 ρv₂²

where P₁ and v₁ are the pressure and velocity of the fluid before the contraction, and P₂ and v₂ are the pressure and velocity of the fluid after the contraction, and ρ is the density of the fluid, which we assume to be constant.

Solving for the pressure and velocity after the contraction, we can use the continuity equation to express v₁ in terms of v₂ and substitute it into the Bernoulli equation:

A₁v₁ = A₂v₂

v₁ = (A₂/A₁) v₂

P₁ + 1/2 ρ((A₂/A₁) v₂)² = P₂ + 1/2 ρv₂²

Simplifying and solving for P₂, we get:

P₂ = P₁ + 1/2 ρ(v₁² - v₂²)

Substituting the given values, we get:

A₂ = (1/3) A₁

v₁ = 5.0 m/s

P₁ = 450000 Pa

ρ = 1000 kg/m³

Using the continuity equation, we can find the value of v₂:

A₁v₁ = A₂v₂

v₂ = (A₁/A₂) v₁

v₂ = 3 × 5.0 m/s

v₂ = 15.0 m/s

Substituting this value into the Bernoulli equation, we can find the pressure P₂:

P₂ = P₁ + 1/2 ρ(v₁² - v₂²)

P₂ = 450000 Pa + 1/2 × 1000 kg/m³ × (5.0 m/s)² - (15.0 m/s)²

P₂ = 450000 Pa - 500000 Pa

P₂ = -50000 Pa

Learn more about velocity here:

https://brainly.com/question/17127206

#SPJ1

The simulation of sound waves bouncing off a flat surface is one model that most accurately depicts what happens when sound waves are reflected.

The term "echo" refers to a sound reflection that follows a direct sound in reaching the listener. The delay increases with the distance between the source and the listener travelled by the reflecting surface.

Longitudinal waves are those produced by sound. Compressions and rarefactions occur during the propagation of longitudinal waves through any given medium. When particles are compressed, high pressure zones are created as a result of their near proximity.

To know more about sound waves visit:-

https://brainly.com/question/29071528

#SPJ1

the magnitude of the electric field in the region between the plates is 1.44 × [tex]10^6[/tex]V/m.

The electric field between the plates of the CRT can be calculated using the formula:

E = V/d

where E is the electric field, V is the potential difference across the plates, and d is the distance between the plates.

Substituting the given values, we get:

E = 24.5 kV / 0.017 m

Converting kV to V and simplifying, we get:

E = 24.5 × [tex]10^3[/tex]V / 0.017 m

E = 1.44 × [tex]10^6[/tex] V/m

An electric field is a force field created by a charged object or collection of charged objects that exerts a force on other charged objects within its vicinity. The electric field is a vector quantity and is measured in units of volts per meter (V/m).

The electric field at a point in space is defined as the force per unit charge acting on a positive test charge placed at that point. The direction of the electric field is given by the direction of the force that would be experienced by a positive test charge placed at that point.

Learn more about electric field here:

https://brainly.com/question/15800304

#SPJ1

Answer:

An atom with an "unstable" nucleus is likely to split into two different atoms (elements) with emission of gamma, alpha, etc. which is radioactive radiation.

Answer:52.972ft^3

Explanation:

It is unit conversion based and for a volume of a bin from cubic meter to cubic foot as we know 1 meter =3.281 foot.

where volume=1.5m^3

multiply 1.5*(3.281)^3 ft^3

v=52.972 ft^3

Answer:

The acceleration of an air cart, which is an object moving on a cushion of air, would not change when adding mass to it because the force of air resistance acting on the cart is negligible compared to the force applied by the air source that propels it. Therefore, the total force acting on the cart remains almost constant, regardless of the cart's mass, and according to Newton's second law of motion, the cart's acceleration would remain the same. This assumes that the air source provides a constant force and that the added mass does not significantly affect the friction between the cart and the surface on which it is moving.

it's only beyond the surface of the sun! There is a barycenter throughout our entire solar system. All of the planets in the solar system, including the sun, center of mass.

The sun is significantly more massive than Earth and has a radius that is likewise much greater. The mass of the sun is more than 333,000 times more than the mass of the Earth and makes up nearly all of the solar system's mass (99.8%).

The Sun is 1000 times more than Jupiter, the solar system's most planet , but Jupiter is still 1000 times less than it.

To know more about center of mass visit :-

https://brainly.com/question/28996108

#SPJ1

Answer:

line graph. A line graph is the best way to show changes in data over time. The geographer can plot the economic growth of one country as a line going up over the 10 years, and the economic decline of the other country as a line going down slightly over the same period. This will allow for a clear visual comparison of the changes in the economies of the two countries over time.

Answer:

To convert temperature from the new scale (X) to Celsius, we simply subtract 0 from the value in X and then multiply the resulting number by a factor of 100/70. This gives us the Celsius temperature.

For 35° X, we can use the formula as follows:

C = (35 - 0) * (100/70)

C = 35 * 1.4286

C = 50°C

Therefore, the correct answer is option A, which is 50.

Answer:

a = 3.02 m/s^2

h

Explanation:

we know that centripetal acceleration (a) is

[tex] \frac{v {}^{2} }{r} = a[/tex]

since v = rω, we can substitute it into the equation, which now gives us the centripetal acceleration in terms of angular velocity and radius (check image).

now we use the values given and find the answer

Note that the wave function of (Px)^2 is given by: (Px)^2 Psi(x) = (h^2/4π^2) [(3α^2 x^2 - α) (α/π)^(1/4) e^(-αx^2/2)]

To find the wave function of (Px)^2, we need to use the momentum operator, which is represented by Px = -i(h/2π) d/dx.

First, let's find the wave function of Px, which is given by:

Px Psi(x) = -i(h/2π) d/dx [Psi(x)]

= -i(h/2π) [-αx Psi(x) + (α^2 x) Psi(x)]

Now, we can find the wave function of (Px)^2 by squaring the wave function of Px:

(Px)^2 Psi(x) = (-i(h/2π) d/dx) (-i(h/2π) d/dx) Psi(x)

= (h^2/4π^2) [α^2 x^2 Psi(x) - 2α x d/dx(Psi(x)) + (d^2/dx^2)(Psi(x))]

Substituting Psi(x) = (α/π)^(1/4) e^(-αx^2/2) into the above expression, we get:

(Px)^2 Psi(x) = (h^2/4π^2) [(3α^2 x^2 - α) (α/π)^(1/4) e^(-αx^2/2)]

Therefore, the wave function of (Px)^2 is given by:

(Px)^2 Psi(x) = (h^2/4π^2) [(3α^2 x^2 - α) (α/π)^(1/4) e^(-αx^2/2)]

Learn more about wave function at:

https://brainly.com/question/17484291

#SPJ1

Basic values of mass in the existing program are c1/2 G-12 h1/2 if the speed of light (c), newtonian constant (G), and Planck's parameter (h) are taken as the fundamental units.

According to the Universal Gravitation Equation, G is equal to 6.673 x 10-11 N m2/kg2. Everything because of how a fruit falls from a tree to the reason the moon rotates around the earth may be explained by the Universal Gravitational Law.

This rule states that the distance is proportional to the product of the mass of the two objects. The Universal Law of Force of gravity is summed up by the following gravitational force equation: FG = (G.m1.

To know more about speed visit :

https://brainly.com/question/28224010

#SPJ9

The equation of motion of a one dimensional standing wave can be derived from first principles using the wave equation.

The wave equation states that the propagation speed of a wave, c, is equal to the square root of the ratio of the wave's tension (T) to its linear mass density (μ). In other words,

[tex]c = \sqrt{ \frac{T}{\mu}[/tex]

For a one dimensional standing wave, the equation of motion can be derived by taking the second derivative of the wave equation with respect to time. This is the equation of motion that results:

[tex]F = \mu (\frac{d2y}{dt2})[/tex]

where F is the total force applied to the wave, and [tex]\frac{dy}{dt}[/tex] is the wave velocity. The equation of motion can be further simplified by substituting the wave equation for c, resulting in the following equation of motion for a one dimensional standing wave:

[tex]F = (\frac{T}{\mu }) (\frac{d2y}{dt2})[/tex]

This equation of motion describes how the total force applied to a one dimensional standing wave affects the wave's velocity.

learn more about motion Refer:brainly.com/question/22810476

#SPJ1

complete question:What is the equation of motion for a one-dimensional standing wave?

Answer:

Each connection requires 50 centimeters of wire, which is equal to 0.5 meters of wire. Therefore, for eight connections, the electrician would need:

8 * 0.5 = 4 meters of wire

Therefore, the correct answer is option D, 4 m.

:

Explanation:

See image for definitions....look at the units and fill the blanks appropriatly

The rate of heat flow through the window is approximately 84.38 W.

The rate of heat flow through the window can be calculated using the formula:

Q = (kA (T1 - T2))/d

Where

We first need to convert the temperatures to Kelvin, since temperature differences must be in Kelvin in this formula:

T1 = 15.0°C + 273.15 = 288.15 K

T2 = 14.0°C + 273.15 = 287.15 K

The thermal conductivity of glass can vary depending on the type of glass, but a typical value is around k = 0.9 W/(m·K) for plate glass.

Substituting the given values into the formula, we get:

Q = (0.9 W/(m·K) x 2.0 m x 1.5 m x (288.15 K - 287.15 K))/0.0032 m

Simplifying this expression, we get:

Q ≈ 84.38 W

Therefore, the rate of heat flow through the window is approximately 84.38 W.

Learn more about thermal conductivity here : brainly.com/question/14919402

#SPJ1

(a) The final velocity of the blue ball is 5 m/s after the collision

(b)  The final velocity of the blue ball is 6 m/s after the collision.

To solve this problem, we can use the conservation of momentum and the conservation of kinetic energy. The total momentum and total kinetic energy of the system before and after the collision must be the same.

a. When the green ball stops moving after the collision, its final velocity is 0 m/s. Let's call the final velocity of the blue ball v. The conservation of momentum equation is:

m_green x v_green + m_blue x v_blue = (m_green + m_blue)v

Substituting the values, we get:

10 kg x 10 m/s + 10 kg x 0 m/s = 20 kg x v

Simplifying, we get:

v = 5 m/s

b. When the green ball continues moving after the collision at 4 m/s in the same direction, its final velocity is 4 m/s. Let's call the final velocity of the blue ball v.

The conservation of momentum equation is the same as before:

m_green x v_green + m_blue x v_blue = (m_green + m_blue)v

Substituting the values, we get:

10 kg x 10 m/s + 10 kg x 0 m/s = 10 kg x 4 m/s + 10 kg x v

Simplifying, we get:

v = 6 m/s

Learn more about linear momentum here: https://brainly.com/question/7538238

#SPJ1

Frequency=  30 Hz, Period= 0.0333 s, Wave Number=15.708 rad/m, Wave Function= y(x, t) = 0.05 sin(15.708x - 94.248t), Transverse displacement= -0.013 m, Time= 0.297 s.

(a) To find the frequency (f), we can use the equation: wave speed = frequency x wavelength. Rearranging this equation, we get:

frequency = wave speed / wavelength

Substituting the given values, we get:

frequency = 12 m/s / 0.4 m = 30 Hz

Therefore, the frequency of the wave is 30 Hz.

To find the period (T), we can use the equation:

period = 1 / frequency

Substituting the frequency value we just calculated, we get:

period = 1 / 30 Hz = 0.0333... s (rounded to four decimal places)

Therefore, the period of the wave is approximately 0.0333 s.

To find the wave number (k), we can use the equation:

wave number = 2π / wavelength

Substituting the given values, we get:

wave number = 2π / 0.4 m = 15.708 rad/m (rounded to three decimal places)

Therefore, the wave number of the wave is approximately 15.708 rad/m.

(b) The wave function for a transverse wave on a string is given by:

y(x, t) = A sin(kx - ωt + φ)

where A is the amplitude, k is the wave number, x is the position of the point on the string, t is the time, ω is the angular frequency, and φ is the phase constant.

We already know the values of A, k, and ω from the previous calculations. To find φ, we can use the given initial condition: "at t = 0 end of the string has zero displacement and is moving upward". This means that y(0,0) = 0 and ∂y/∂t(0,0) > 0. Substituting these conditions into the wave function, we get:

0 = A sin(0 + φ)

∂y/∂t = -Aω cos(0 + φ)

Since sin(0 + φ) = sin(φ) = 0 (because sin(0) = 0), we get:

φ = nπ, where n is an integer

Since cos(0 + φ) = cos(φ) = 1 (because cos(0) = 1) and ∂y/∂t(0,0) > 0, we get:

n = 0 or 2

Therefore, the possible values of φ are 0 or 2π.

Substituting the values of A, k, ω, and φ, we get:

y(x, t) = 0.05 sin(15.708x - 94.248t)

Therefore, the wave function describing the wave is:

y(x, t) = 0.05 sin(15.708x - 94.248t)

(c) To find the transverse displacement of a wave at x = 0.25 m and t = 0.15 s, we can use the wave function we just found:

y(0.25, 0.15) = 0.05 sin(15.708(0.25) - 94.248(0.15))

y(0.25, 0.15) ≈ -0.013 m (rounded to three decimal places)

Therefore, the transverse displacement of the wave at x = 0.25 m and t = 0.15 s is approximately -0.013 m.

(d) To find how much time must elapse from the instant in part (c) until the point at x = 0.25 m has zero displacement,

From part (c), we know that the transverse displacement of the wave at x = 0.25 m and t = 0.15 s is approximately -0.013 m. We need to find the time it takes for this point to return to zero displacement.

We can use the wave function we found in part (b) and set y(0.25, t) = 0:

0 = 0.05 sin(15.708(0.25) - 94.248t)

Since sin(θ) = 0 when θ = nπ (where n is an integer), we get:

15.708(0.25) - 94.248t = nπ

Solving for t, we get:

t = (15.708(0.25) - nπ) / 94.248

To find the smallest positive value of t that satisfies this equation, we need to use the smallest positive value of n that makes the right-hand side of the equation positive (because we want to find the time it takes for the point at x = 0.25 m to return to zero displacement, which happens after the point has completed a full cycle). We can see from the equation that n must be an even integer to make the right-hand side positive. The smallest even integer greater than zero is 2. Substituting n = 2, we get:

t = (15.708(0.25) - 2π) / 94.248

t ≈ 0.297 s (rounded to three decimal places)

Therefore, the time it takes for the point at x = 0.25 m to return to zero displacement is approximately 0.297 s.

Know more about displacement here:

https://brainly.com/question/30087445

#SPJ1

The buoyant force always pushes objects up toward the surface of the fluid because it is the upward force that acts on an object submerged in a fluid, such as water or air.

This upward force is known as the buoyant force and is equal to the weight of the fluid displaced by the object which means that the buoyant force is always pushing the object up toward the surface of the fluid. In general, the buoyant force is stronger than gravity when the object is less dense than the fluid and weaker when the object is more dense than the fluid. Thus, the force of gravity is always pulling objects down, but the buoyant force can be stronger or weaker than gravity depending on the object’s density and the density of the fluid. Hence, the buoyant force always pushes objects up toward the surface of the fluid, regardless of whether the fluid is water, air, or some other fluid.

To learn more about buoyant force click here https://brainly.com/question/21990136

#SPJ1

Answer:

The answer is 8%

Explanation:

We know that the efficiency of the machine is given by,

E=(M.A)*100

=([tex]\frac{20}{50}[/tex])*[tex]\frac{1}{5}[/tex]*100

=8%

Answer:

the magnitude of the frictional force acting between the box and the floor is 5 N.

Explanation:

The number of sources that we have to add at A so that the sound level intensity at M is doubled is 2.

(a) Let the distance of point A from one source be x. Then the distance from the other source is (OA - x), where OA is the distance between the two sources. The sound intensity at point A due to one source is proportional to 1/x^2. So, if the sound power of one source is P, then the sound intensity at A due to one source is given by I = P/(4πx^2), where 4πx^2 is the surface area of a sphere with radius x.

The sound level intensity is defined as L = 10log(I/I0), where I0 is a reference intensity (I0 = 10^-12 W/m^2). Since there are two sources, the total sound intensity at A is twice the sound intensity due to one source, i.e., I_total = 2I = 2P/(4πx^2). Therefore, the sound level intensity at A is L = 10log(2P/(4πx^2I0)) = 10log(2P/(4πI0)) - 20log(x).

(b) Let the distance of point M from one source be y. Then the distance from the other source is (OM - y), where OM is the distance between O and M. The sound intensity at M due to one source is proportional to 1/y^2. So, if the sound power of one source is P, then the sound intensity at M due to one source is given by I = P/(4πy^2), where 4πy^2 is the surface area of a sphere with radius y.

The sound level intensity at M due to one source is L_M = 10log(I/I0) = 10log(P/(4πy^2I0)).

Since the sound intensity is inversely proportional to the square of the distance, the sound intensity at A due to one source is four times the sound intensity at M due to one source. Therefore, I_A = 4I = 4P/(4πy^2), and the sound level intensity at A due to one source is L_A = 10log(I_A/I0) = 10log(P/(πy^2I0)).

We want the total sound level intensity at M due to all sources to be L_M = L_A + 10log2, where 10log2 is the sound level intensity increase due to adding a second source. Therefore, we have:

10log(P/(4πy^2I0)) + 10log2 = 10log(P/(πy^2I0))

10log2 = 10log(4/π)

log2 = log(4/π)

2 = 4/π

π = 2

Learn more about intensity here:

https://brainly.com/question/17323212

#SPJ1

PLS MRK ME BRAINLIEST

Answer:

True

Explanation:

optical fibre consists of core and cladding. The signal is converted to light using transducers. The light travels across the cable undergoing multiple internal reflections. At the other end the light is converted back to Signal using transducers.

Answer: True

Explanation: Optical fiber uses the optical principle of "total internal reflection" to capture the light transmitted in an optical fiber and confine the light to the core of the fiber.

If I get this wrong im sorry

Explanation:

It ignores some basic laws of physics:

  You cannot get more work out of a machine than goes in

    You cannot ignore friction

Answer:

Options B

Explanation:

The appropriate quantitative research method for understanding political views held by the young population of a specific area is written surveys (option b). Surveys allow for the collection of data from a large number of participants, and specific questions can be asked to gather data on political views.

Participant observation (option a) involves direct observation of individuals in a natural setting, which may not be practical for studying political views.

Secondary data analysis (option c) involves analyzing data that has already been collected, and may not be specific to the young population or the area of interest.

Laboratory experiments (option d) are typically used to study cause-and-effect relationships between variables, which may not be applicable to studying political views.

Therefore, the best option for understanding the political views held by the young population of a specific area is written surveys.

To understand the political views of the young population of a specific area, a researcher can use written surveys, participant observation, and secondary data analysis as quantitative research methods.

If a researcher is trying to understand the political views held by the young population of a specific area, they should use written surveys, participant observation, and secondary data analysis as quantitative research methods.

https://brainly.com/question/33505242

#SPJ2

The man who walks at 3.56 m/s and accelerates at 2.50 m/s2 for 9.28 s would walk a distance of  135.245 meters.

We can use the kinematic equation:

distance = initial velocity x time + (1/2) x acceleration x time^2

To use this equation, we need to find the initial velocity of the man before he started accelerating. We can do this using the formula:

final velocity = initial velocity + acceleration x time

At the start, the man's velocity was 3.56 m/s, and he accelerates at 2.50 m/s^2 for 9.28 s. Therefore, his final velocity can be calculated as:

final velocity = 3.56 + 2.50 x 9.28

final velocity = 26.08 m/s

Now we can use the distance formula:

distance = initial velocity x time + (1/2) x acceleration x time^2

with initial velocity being 3.56 m/s, time being 9.28 s, acceleration being 2.50 m/s^2, and final velocity being 26.08 m/s:

distance = 3.56 x 9.28 + (1/2) x 2.50 x (9.28)^2

distance = 32.968 + 102.277

distance = 135.245 m

Therefore, the man traveled a distance of approximately 135.245 meters.

More on motion can be found here: https://brainly.com/question/31255572

#SPJ1

Answer:

Quantum physics is the study of matter and energy at the most fundamental level. It aims to uncover the properties and behaviors of the very building blocks of nature.

Assuming a circular orbit for the Sun, we can use the equation:

v^2 = GM/r

where v is the orbital velocity of the Sun, r is the distance from the center of the galaxy, G is the gravitational constant, and M is the mass of the galaxy.

We can solve for M:

M = v^2 * r / G

Using the given values of v = 240 km/s and r = 7.2 kpc = 7.2 * 3.086e+19 m, and G = 6.6743e-11 N m^2/kg^2, we get:

M = (240000 m/s)^2 * 7.2 * 3.086e+19 m / 6.6743e-11 N m^2/kg^2

M = 1.47e+42 kg

Therefore, the minimum mass of the galaxy, if the distance of the solar system from the center is actually 7.2 kpc, is approximately 1.47 x 10^42 kg.

Therefore, the answer is (a) 1292 cm is stick has a shadow when held vertical.

Additionally, since light moves in a straight path from its source to an object, the shadow of the object moves with the light source.

Let's use h centimetres to represent the tree's height. We have the following percentage in the problem:

height of tree/length of its shadow = height of meter stick/length of its shadow

or

h / 4200 = 100 / 325

We can solve this proportion for h:

h = 4200 * 100 / 325 = 1292.31 cm

Rounding to the nearest centimeter, we get:

h ≈ 1292 cm

To know more about vertical visit:-

https://brainly.com/question/11679227

#SPJ1