Answer:
To calculate the work done by John when lifting a 20kg mass to a height of 2m, we can use the formula: work = force x distance x cos(theta) where force is the weight of the mass (20kg x 9.81 m/s^2 = 196.2 N), distance is the height the mass is lifted (2m), and cos(theta) is the angle between the force and the displacement (cos(0) = 1, since the force and displacement are in the same direction). Substituting these values into the formula, we get: work = 196.2 N x 2m x 1 work = 392.4 J Therefore, John did 392.4 joules of work when lifting the 20kg mass to a height of 2m.
write an expression for how much energy it receives per hour from the high temperature thermal reservoir in terms of the absolute temperatures tc and th.
An expression for how much energy it receives per hour from the high temperature thermal reservoir in terms of the absolute temperatures tc and th is Eh=(1−Tc/Th)(P).
The expression can be achieved using Carnot engine. This formula is as follows:η=1−Tc/Th where η is the efficiency of the engine, Tc is the absolute temperature of the low-temperature reservoir, and Th is the absolute temperature of the high-temperature reservoir.
To find how much energy it receives per hour from the high temperature thermal reservoir, we can multiply the efficiency of the engine by the rate of energy input from the high-temperature reservoir. This gives the following expression: Eh=(η)(P)where Eh is the energy received per hour from the high-temperature reservoir, P is the power input to the engine, and η is the efficiency of the engine.
Substituting the expression for η into the equation for Eh, we get the following: Eh=(1−Tc/Th)(P). This is the expression for how much energy is received per hour from the high temperature thermal reservoir in terms of the absolute temperatures tc and th.
Know more about thermal reservoir here:
https://brainly.com/question/13154260
#SPJ11
if the magnet, still oriented with the south pole pointing downward, is pulled upward completely through the solenoid, what is the direction of the induced current measured in the ammeter?
The direction of the induced current measured in the ammeter will be in the direction of your thumb, following the right-hand rule.
To determine the direction of the induced current measured in the ammeter when the magnet with the south pole pointing downward is pulled upward completely through the solenoid, follow these steps:
1. Apply Lenz's Law, which states that the induced current will create a magnetic field that opposes the change in the original magnetic field.
2. As the magnet's south pole is pulled upward through the solenoid, the magnetic field inside the solenoid is decreasing.
3. To oppose this decrease, the induced current will create a magnetic field in the same direction as the original magnetic field, meaning the induced magnetic field will have its south pole pointing downward.
4. Use the right-hand rule to determine the direction of the induced current: Curl your fingers in the direction of the magnetic field (south pole pointing downward), and your thumb will point in the direction of the induced current.
Thus, the direction of the induced current will be in the right-hand rule of your thumb.
To know more about the right-hand rule click here:
https://brainly.com/question/27332584
#SPJ11
3. Why does it take large number of electrons make up a single useful amount of charge?
A) Electrons are useless on their own
B) The amount of charge on a single electron is almost insignificant
C) Electricity requires a lot of electrons
D) Electrons are easily destroyed
Answer:
The answer is B
Explanation:
Electrons have a negative charge and are fundamental particles that make up atoms. However, the charge on a single electron is very small, approximately -1.6 x 10^-19 coulombs. As a result, it takes a very large number of electrons to make up a single useful amount of charge. For example, a typical AA battery contains approximately 6 x 10^21 electrons. This is because electricity is typically measured in terms of coulombs, which is a unit of charge. Therefore, the larger the number of electrons, the greater the amount of charge, and the more useful the electricity is for various applications.
how does the direction of the tension vector relate to the direction of Fg and Fq vectors
The direction of the tension vector is directly related to the direction of the force of gravity and the force of friction vectors, with tension acting in a direction that opposes these forces.
The direction of the tension vector in a system is directly related to the direction of the force of gravity (Fg) and the force of friction (Fq) vectors. In general, tension acts in a direction that opposes the force of gravity and the force of friction. When an object is hanging from a rope or cable, the tension force is acting upward on the object, while the force of gravity is acting downward. This creates a system where the tension force and the force of gravity are in opposite directions, with the tension force acting against the force of gravity to keep the object from falling. Similarly, when an object is being pulled or pushed across a surface, the force of friction is acting in the opposite direction of the applied force, while the tension force is acting in the same direction as the applied force. This creates a system where the tension force and the force of friction are once again in opposite directions, with the tension force acting against the force of friction to keep the object moving.
To know more about tension please refer: https://brainly.com/question/30616235
#SPJ1
in which two systems are the comparisons of distances between the objects and the sizes of the objects the most similar? in which two systems are the comparisons of distances between the objects and the sizes of the objects the most similar? moon and planets two of these are correct stars in a galaxy planets and stars galaxies
When comparing the distances between objects and the sizes of objects, the most similar comparisons can be made between C. stars in a galaxy and D. galaxies themselves.
Stars are large objects that emit light and heat, while galaxies are collections of stars, dust, and gas held together by gravity. Both stars and galaxies come in a variety of sizes, with some being much larger and more massive than others. However, in terms of the distances between objects, stars, and galaxies are much more similar.
Although galaxies can be quite large, the distances between them are so great that they appear as mere dots of light in the night sky. Similarly, the distances between stars are so vast that even the closest star to Earth, Proxima Centauri, is over 4 light-years away. As a result, when making comparisons between the distances and sizes of objects, it is most appropriate to compare stars in a galaxy to galaxies themselves. Therefore the correct option is C and D
Know more about gravity here:
https://brainly.com/question/940770
#SPJ11
a train is moving parallel to a highway with a constant speed of 20.0 m/s. a car is traveling in the same direction as the train with a speed of 40.0 m/s. the car horn sounds at a frequency of 510 hz, and the train whistle sounds at a frequency of 320 hz. (a) when the car is behind the train, what frequency does an occupant of the car observe for the train whistle? (b) after the car passes and is in front of the train, what frequency does a train passenger observe for the car horn?
(a) An occupant of the car will observe a frequency of 295.3 Hz for the train whistle.
(b) Train passenger will observe a frequency of 579.2 Hz for the car horn.
This is a problem related to the Doppler Effect, which describes the change in frequency of a wave as a result of the motion of the source or the observer (or both) relative to the medium in which the wave is propagating.
(a) When the car is behind the train, it is moving in the same direction as the train. Therefore, an observer in the car will hear the train whistle at a lower frequency than its actual frequency.
This is because the sound waves from the whistle have to "catch up" to the car, which is moving away from them.
The formula for the observed frequency in this case is:
[tex]f_{obs}[/tex] = [tex]f_{source}[/tex] x ([tex]v_{sound}[/tex] ± [tex]v_{observer}[/tex]) / ([tex]v_{sound}[/tex] ± [tex]v_{source}[/tex])
where
[tex]f_{source}[/tex] is the frequency of the source,
[tex]v_{sound}[/tex] is the speed of sound in air (which we assume to be 343 m/s), [tex]v_{observer}[/tex] is the speed of the observer (which is equal to the speed of the car, 40.0 m/s), and
[tex]v_{source}[/tex] is the speed of the source (which is equal to the speed of the train, 20.0 m/s).
The ± sign depends on whether the observer and the source are moving towards each other or away from each other.
In this case, they are moving away from each other, so we use the - sign:
[tex]f_{obs}[/tex] = 320 x (343 - 40) / (343 - 20) = 295.3 Hz
(b) After the car passes and is in front of the train, it is moving towards the train.
Therefore, a passenger in the train will hear the car horn at a higher frequency than its actual frequency.
This is because the sound waves from the horn are compressed as they "catch up" to the train, which is moving towards them.
The formula for the observed frequency in this case is:
[tex]f_{obs}[/tex] = [tex]f_{source}[/tex] x ([tex]v_{sound}[/tex] ± [tex]v_{observer}[/tex]) / ([tex]v_{sound}[/tex] ± [tex]v_{source}[/tex] )
where
[tex]f_{source}[/tex] is the frequency of the source (which is equal to the frequency of the car horn, 510 Hz),
[tex]v_{sound}[/tex] is the speed of sound in air (which we assume to be 343 m/s),
[tex]v_{observer}[/tex] is the speed of the observer (which is equal to the speed of the train, 20.0 m/s), and
[tex]v_{source}[/tex] is the speed of the source (which is equal to the speed of the car, -40.0 m/s, since it is moving towards the train).
The ± sign depends on whether the observer and the source are moving towards each other or away from each other. In this case, they are moving towards each other, so we use the + sign:
[tex]f_{obs}[/tex] = 510 x (343 + 20) / (343 + 40) = 579.2 Hz
For similar question on frequency
https://brainly.com/question/254161
#SPJ11
Which species has the largest influence on the Earth?
Answer:
The species that has had the largest influence on Earth is undoubtedly humans. Human activity has significantly altered the natural environment, leading to climate change, deforestation, ocean acidification, and many other damaging effects on the planet.
a thin copper wire in the same circuit is 8 mm long and has a constant cross section of 0.2 mm. the conductivitiy is. calculate the resistance r of the copper wire and the potential v atend at the other end of the wire.
Potential V at the other end of the copper wire is 4.82 V.
The resistance of a wire is given by the formula: R = ρL/A
Using the given values:
R = (1.68 x 10^-8 Ωm) x (8 x 10^-3 m) / (0.2 x 10^-6 m^2) = 0.672 Ω
The potential difference (voltage) at the end of the wire can be calculated using Ohm's law: V = IR
I = V/R = 12 V / 1.672 Ω = 7.18 A
Substituting this value of current and the calculated resistance into Ohm's law gives:
V = IR = (7.18 A) x (0.672 Ω) = 4.82 V
Therefore, the potential at the other end of the copper wire is 4.82 V.
To know more about Ohm's law , here
brainly.com/question/1247379
#SPJ4
A horse pulls a tree trunk there is a force of 1500 nutrients, and moves a distance of 10 meters in 15 seconds find the work and the power
The power exerted by the horse is 1,000 watts, which is equivalent to 1 kilowatt (kW).
To find the work done by the horse and the power exerted, we can use the following equations:
Work = Force x Distance x cos(theta)
Power = Work / Time
where theta is the angle between the direction of the force and the direction of the displacement. Assuming that the force is applied horizontally and the displacement is also horizontal, the angle theta is 0 degrees, so cos(theta) = 1.
Given that the force applied by the horse is 1500 N and the distance moved is 10 m, we can calculate the work done as follows:
Work = Force x Distance x cos(theta)
Work = 1500 N x 10 m x 1
Work = 15,000 J
Therefore, the work done by the horse in pulling the tree trunk is 15,000 joules.
To find the power exerted by the horse, we need to divide the work done by the time taken. Given that the time taken is 15 seconds, we have:
Power = Work / Time
Power = 15,000 J / 15 s
Power = 1,000 W
Therefore, the power exerted by the horse is 1,000 watts, which is equivalent to 1 kilowatt (kW).
For such more question on kilowatt:
https://brainly.com/question/14149152
#SPJ11
Can someone help me
ASAP pleazs
The horizontal component of the velocity is 10.6 m/s and the vertical component of the velocity is 7.5 m/s.
What are the values of the horizontal and vertical components of velocity?The horizontal and vertical components of the velocity can be found using the following equations:
Vx = Vcos(θ)
Vy = Vsin(θ)
where V is the initial velocity, θ is the angle of projection, Vx is the horizontal component of the velocity, and Vy is the vertical component of the velocity.
Substituting the given values, we get:
Vx = 13 m/s × cos(35°) = 10.6 m/s
Vy = 13 m/s × sin(35°) = 7.5 m/s
The time of flight can be found using the following equation:
t = 2Vsin(θ) / g
where g is the acceleration due to gravity, which is approximately 9.8 m/s^2.
Substituting the given values, we get:
t = 2 × 13 m/s × sin(35°) / 9.8 m/s^2 ≈ 1.9 s
Therefore, the giant snowball is in the air for approximately 1.9 seconds.
The horizontal distance traveled can be found using the following equation:
d = Vx × t
Substituting the values we found earlier, we get:
d = 10.6 m/s × 1.9 s
d ≈ 20.1 m
Therefore, the giant snowball travels approximately 20.1 meters horizontally before hitting the ground.
Learn more about horizontal and vertical components of velocity at: https://brainly.com/question/31108618
#SPJ1
a 150 n block rests on a table. the suspended mass has a weight of 65 n. what is the magnitude of the minimum force of static friction required to hold both blocks at rest? answer in units of n.
A 150 N block rests on a table while a suspended mass has a weight of 65 N. The magnitude of the minimum force of static friction required to hold both blocks at rest is 64.5 N
The force of static friction is calculated using the formula
Fsf ≤ µsfFn
where: Fsf = Force of static friction (unknown)
µsf = Coefficient of static friction (unknown)
Fn = Normal force (known)
As the block is resting on the table, Fn is equal to the weight of the block.
Thus,Fn = 150 N
To find the minimum force of static friction required, we need to calculate the maximum value of Fsf.
The maximum value of Fsf is equal to µsfFn.
As the block is at rest, the force of friction is equal to the minimum force of static friction.
Therefore, the minimum force of static friction is equal to the maximum value of Fsf.
Thus,Fsf = µsfFn= µsf(150 N)
We are given the weight of the suspended mass, which is 65 N.
As the system is at rest, the horizontal component of the gravitational force on the suspended mass must be balanced by the force of static friction acting on the block.
Therefore,Fsf = 65 N
We can substitute the value of Fsf in terms of Fn to obtain:
µsfFn = 65 N
µsf = 65/150
= 0.43
Therefore, the magnitude of the minimum force of static friction required to hold both blocks at rest is 0.43 × 150 N = 64.5 N (rounded to one decimal place)
For more such questions on static friction, click on:
https://brainly.com/question/13680415
#SPJ11
200 meters in 20 seconds
The speed of the object is 10 meters/second.
Speed is defined as the rate at which an object covers distance. It is a scalar quantity, which means that it only has a magnitude (i.e., size) and no direction. The SI unit for speed is meters per second (m/s).
To calculate speed, we need to know the distance traveled and the time it took to cover that distance. In this case, we were given that the object traveled 200 meters and took 20 seconds to do so. We then used the formula:
speed = distance / time
To calculate the speed of the object. We divided the distance traveled by the time it took to travel that distance to find the speed.
Substituting the given values into the formula, we get:
speed = 200 meters / 20 seconds
This simplifies to:
speed = 10 meters/second
Learn more about speed here:
https://brainly.com/question/28224010
#SPJ1
a wave hits one side of a screen where one slit is carved. if we observe the behavior on the other side of the screen, what do we notice?
Answer:
If a wave hits one side of a screen where one slit is carved, the wave will diffract through the slit and produce an interference pattern on the other side of the screen. This interference pattern will consist of alternating bright and dark fringes, indicating areas of constructive and destructive interference, respectively. This is known as the single-slit diffraction pattern, which is a characteristic behavior of wave-like phenomena such as light and sound waves. The pattern will become more pronounced as the slit width decreases and the wavelength of the wave increases.
When a wave hits a screen with a single slit, it diffracts, and the diffracted wavefronts interfere with each other, forming a pattern of constructive and destructive interference fringes on the screen that is on the other side of the screen.
This pattern is known as an interference pattern, and it is a characteristic of wave phenomena, such as light and sound. This interference pattern can be observed by placing a detector screen on the other side of the single slit screen. The interference pattern that is observed on the detector screen will have bright and dark fringes, indicating constructive and destructive interference, respectively.
To know more about wavefronts click here:
brainly.com/question/24220518
#SPJ11
a. a baseball dropped from the roof of a house b. a baseball rolling toward third base c. a pinwheel in the wind d. a door swinging open
The different type of motion are translational motion, rotational motion, oscillatory motion and motion due to gravity.
The following are examples of different types of motion:
a. The motion of a baseball dropped from the roof of a house is an example of free fall motion. The ball accelerates towards the ground due to the force of gravity.
b. The motion of a baseball rolling toward third base is an example of translational motion. The ball moves in a straight line along the ground, with its direction determined by the initial velocity and any external forces acting upon it.
c. The motion of a pinwheel in the wind is an example of rotational motion. The blades of the pinwheel rotate about a central axis, with their motion determined by the direction and strength of the wind.
d. The motion of a door swinging open is an example of oscillatory motion. The door oscillates back and forth around its equilibrium position, with its motion determined by the initial displacement and any external forces acting upon it.
For more such questions on motion , Visit:
https://brainly.com/question/453639
#SPJ11
The complete questions is:
Explain the different types of motion occur in the following cases
a. a baseball dropped from the roof of a house
b. a baseball rolling toward third base
c. a pinwheel in the wind
d. a door swinging open
1. a 1 m diameter wheel rotates clockwise 10 times per second. what is its angular velocity? what is the tangential velocity of the outside of the wheel? what is the angular displacement after 3 seconds? how far linearly will the wheel roll after 3 seconds?
Answer: Use a search engine so you can learn and stuff it’s a move I don’t study in this stuff I’m a history major
The angular velocity of the wheel is 62.83 radians per second. The tangential velocity of the outside of the wheel is 31.42 meters per second. The angular displacement after 3 seconds is 188.5 radians. The wheel will roll 94.25 meters linearly after 3 seconds.
The angular velocity of a rotating object is the rate at which it rotates about its axis, measured in radians per second. Since the wheel rotates 10 times per second, the angular velocity can be calculated as:
angular velocity = 10 rotations/second * 2π radians/rotation
angular velocity = 62.83 radians/second
The tangential velocity of the outside of the wheel can be calculated using the formula:
tangential velocity = radius * angular velocity
The radius of the wheel is half its diameter, or 0.5 meters. Thus, the tangential velocity is:
tangential velocity = 0.5 meters * 62.83 radians/second
tangential velocity = 31.42 meters/second
The angular displacement after 3 seconds can be calculated using the formula:
angular displacement = angular velocity * time
angular displacement = 62.83 radians/second * 3 seconds
angular displacement = 188.5 radians
Finally, to find the distance that the wheel rolls linearly, we can use the formula:
distance = circumference * number of rotations
The circumference of the wheel is π times its diameter, or π meters. After 3 seconds, the wheel has completed 30 rotations (10 rotations/second * 3 seconds). Thus, the distance rolled is:
distance = π meters * 30 rotations
distance = 94.25 meters
Therefore, the angular velocity of the wheel is 62.83 radians per second, the tangential velocity of the outside of the wheel is 31.42 meters per second, the angular displacement after 3 seconds is 188.5 radians, and the distance that the wheel rolls linearly after 3 seconds is 94.25 meters.
To know more about angular velocity, refer here:
https://brainly.com/question/30885221#
#SPJ11
identify the type of each genetic disorder this is science
Cystic fibrosis is a recessive genetic disorder caused by a mutation in the CFTR gene. It affects the lungs, pancreas, and other organs, causing difficulties in breathing and digestive problems.
Hemophilia is an X-linked recessive genetic disorder that affects blood clotting due to mutations in clotting factor genes. Hemophilia A is caused by a mutation in the F8 gene while hemophilia B is caused by a mutation in the F9 gene.
Duchenne muscular dystrophy is an X-linked recessive genetic disorder caused by mutations in the DMD gene, which codes for a protein called dystrophin. It affects muscle function and leads to muscle weakness and wasting.
Huntington's disease is an autosomal dominant genetic disorder caused by a mutation in the HTT gene. It affects brain function, leading to psychiatric symptoms and movement problems.
To know more about genetic disorder, visit:
https://brainly.com/question/17404085
#SPJ1
Cystic fibrosis - autosomal recessive pattern, Hemophilia - X-linked recessive pattern, Duchenne muscular dystrophy - X-linked recessive pattern and Huntington's disease - autosomal dominant pattern.
Can genetic conditions be treated?Gene alterations that are essentially present in every cell in the body cause many hereditary diseases. These illnesses thus frequently impact many bodily systems, and the majority cannot be treated. To treat or manage some of the accompanying symptoms, there might be methods available.
An X-linked recessive pattern: what is it?Genetic disorders connected to mutations in genes on the X chromosome are referred to as having X-linked recessive inheritance. Because he contains just one X chromosome, a male who carries this mutation will be affected. A female who carries a gene mutation in one X chromosome but has a normal gene on the other X chromosome usually has no symptoms.
To know more about the genetic disorder visit:
https://brainly.com/question/30424478
#SPJ1
a diffuser slows down incoming air initially at 37 degc and 300 m/s to essentially zero velocity. what is the air temperature (in degc) at the diffuser exit? assume ideal gas behavior, rair
The air temperature at the diffuser exit is approximately 79 degC.
We can use the conservation of energy equation to determine the temperature of the air at the diffuser exit, assuming ideal gas behavior. The conservation of energy equation can be written as;
(1/2) × m × v₁² + m × c × T₁ = (1/2) × m × v₂² + m × c × T₂
where m is the mass of the air, v₁ and v₂ are the velocities of the air at the inlet and outlet of the diffuser, respectively, c is the specific heat capacity of air at constant pressure, T₁ is the initial temperature of the air, and T₂ is the temperature of the air at the diffuser exit.
Since the air is slowed down to essentially zero velocity at the diffuser exit, we can assume that v₂ is zero. Thus, the conservation of energy equation becomes;
(1/2) × m × v₁² + m × c × T₁ = m × c × T₂
Simplifying and rearranging the equation, we get;
T₂ = T₁ + (v₁² / (2 × c))
We are given that the initial temperature T₁ is 37 degC and the velocity v₁ is 300 m/s. The specific heat capacity of air at constant pressure, c, is approximately 1005 J/(kg·K), and the molar mass of air, Mair, is approximately 28.97 g/mol.
Converting the velocity to SI units (m/s) and the temperature to Kelvin, we get;
T₁ = 37 + 273 = 310 K
v₁ = 300 m/s
Put these values into equation for T₂, we have;
T₂ = 310 + (300² / (2 × 1005)) = 352 K
Converting the temperature back to degrees Celsius, we get;
T₂ = 352 - 273
= 79 degC
To know more about conservation of energy here
https://brainly.com/question/2137260
#SPJ4
a permanent magnet is moved toward a 320-turn solenoid such that the magnetic field inside the solenoid increases from zero to 0.50 t in 0.75 seconds. the area of the solenoid rings is 0.004 m2. the ends of the solenoid are connected to a lightbulb. what is the induced emf during this time interval?
When the ends of the solenoid are connected to a lightbulb, The induced emf during the time interval (0.75 seconds) is 0.8533 V.
The induced emf in a solenoid can be calculated using Faraday's law of electromagnetic induction, which states that the induced emf is equal to the negative rate of change of magnetic flux through the solenoid.
The formula for induced emf is:
emf = -N * (ΔΦ / Δt)
where N is the number of turns in the solenoid (320), ΔΦ is the change in magnetic flux, and Δt is the time interval (0.75 seconds).
Magnetic flux (Φ) is given by the formula:
Φ = B * A
where B is the magnetic field and A is the area of the solenoid rings. The initial magnetic flux is zero since the initial magnetic field is zero.
The final magnetic flux is:
Φ_final = 0.50 T * 0.004 m² = 0.002 Wb
So, the change in magnetic flux (ΔΦ) is:
ΔΦ = Φ_final - Φ_initial = 0.002 Wb - 0 Wb = 0.002 Wb
Now, we can calculate the induced emf:
emf = -320 * (0.002 Wb / 0.75 s) = -0.8533 V
Since the negative sign indicates the direction of the induced emf, the magnitude of the induced emf is 0.8533 V.
For more such questions on solenoid, click on:
https://brainly.com/question/25562052
#SPJ11
a 2.15-kg, 16.0-cm radius, high-end turntable is rotating freely at 33.3 rpm when a naughty child drops 11 g of chewing gum onto it 10.0 cm from the rotation axis.
The new angular speed of the turntable is approximately 2.91 rad/s.
What is meant by rotation?Circular movement of object around central axis or point is called rotation.
Moment of inertia of a solid disk is given by the equation: I = (1/2) * m * r²
I is moment of inertia, m is mass of the disk, and r is radius of the disk.
Initial moment of inertia of the turntable is: I₁ = (1/2) * m * r² = (1/2) * 2.15 kg * (0.16 m)² = 0.055 kg m²
Final moment of inertia of the turntable and the gum is: I₂ = I₁+ m_gum * r_gum²
m_gum is mass of gum and r_gum is distance of gum from rotation axis.
I₂ = 0.055 kg m² + 0.011 kg * (0.11 m)² = 0.066 kg m²
L₁ = I₁ * w₁
w1 is initial angular speed of turntable in radians per second.
w1 = (33.3 rpm) * (2π rad/rev) / (60 s/min) = 3.49 rad/s
Final angular momentum of the system (turntable and gum) is:
L₂ = I₂ * w₂
w₂ is final angular speed of turntable in radians per second.
As angular momentum is conserved : L₁ = L₂
I₂ * w₂ = I₂ * w₂
w₂ = (I₁ / I₂) * w₁ = (0.055 / 0.066 ) * 3.49 = 2.91 rad/s
Therefore, the new angular speed of the turntable is approximately 2.91 rad/s.
To know more about rotation, refer
https://brainly.com/question/28439775
#SPJ1
Note: The question given on the portal is incomplete. Here is the complete question.
Question : A 2.15-kg, 16.0-cm radius, high-end turntable is rotating freely at 33.3 rpm when a naughty child drops 11 g of chewing gum onto it 11.0 cm from the rotation axis. Assuming that the gum sticks where it lands, and that the turntable can be modeled as a solid, uniform disk, what is the new angular speed of the turntable
when a certain liquid freezes, it expands about 11.0%. what would be the pressure increase inside an engine block if the liquid in it froze? (the bulk modulus of the liquid when it solidifies is 1.70 109 n/m2.)
When a certain liquid freezes and expands by about 11.0%, the pressure increase inside an engine block is
To determine the pressure, you would follow these steps:
1. Calculate the fractional volume change: Since the liquid expands by 11.0%, the fractional volume change (∆V/V) is 0.11.
2. Apply the bulk modulus formula: The bulk modulus (K) is a property of the material that describes how its volume changes under pressure.
The formula relating pressure change (∆P), fractional volume change (∆V/V), and bulk modulus (K) is:
∆P = -K (∆V/V)
3. The bulk modulus of the liquid when it solidifies is 1.70 x 10^9 N/m^2, and the fractional volume change is 0.11. Using the formula from step 2:
∆P = - (1.70 x 10^9 N/m^2) (-0.11)
4. Calculate the pressure increase: Multiply the bulk modulus by the fractional volume change:
∆P = (1.70 x 10^9 N/m^2) (0.11) = 1.87 x 10^8 N/m^2
So, the pressure increase inside the engine block when the liquid in it freezes and expands by about 11.0% is 1.87 x 10^8 N/m^2.
To know more about pressure click here:
https://brainly.com/question/2060803
#SPJ11
one joule of work is needed to move one coulomb of charge from one point to another with no change in velocity. what is true between the two points?
One joule of work is needed to move one coulomb of charge from one point to another without a change in velocity. It is true that between the two points, the electric potential difference, or voltage, is equal to one volt
The statement “one joule of work is needed to move one coulomb of charge from one point to another with no change in velocity” refers to the potential difference or voltage between the two points. Therefore, it is true that there is a potential difference of one volt between the two points.
This is because one volt is defined as the potential difference across a conductor when one joule of work is done per coulomb of charge that is transferred.
For more such questions on work, click on:
https://brainly.com/question/25573309
#SPJ11
the magnet dimensions are about 6x6x12mm. if a 12 mm long solenoid were constructed with 100 turns - each turn having a 36mm^2 cross sectional area, how much current would it have to carry to have the dipole strength of your magnet? this calculation will let you see how you could use a solenoid to produce a magnetic field equal to that of your bar magnet
Solenoid would need to carry a current of about 0.157 A to produce a magnetic field with the dipole strength of the given bar magnet.
How to determine magnetic field using Solenoid ?The dipole moment of the bar magnet is given by:
m = VχB
where V is the volume of the magnet, χ is the magnetic susceptibility, and B is the magnetic field strength.
The volume of the magnet is:
V = (6 mm) (6 mm) (12 mm)
= 432 mm⁻³ = 4.32 × 10⁻⁷m⁻³
The magnetic susceptibility of the magnet depends on its material and can be found from a table or measured experimentally.
Let's assume it is χ = 0.05 (typical for a permanent magnet).
The magnetic field strength at the center of the magnet can be approximated as:
B = μ0m / (4πr³)
where μ0 is the permeability of free space, m is the dipole moment, and r is the distance from the center of the magnet.
For our magnet, r = 6 mm / 2 = 3 mm = 0.003 m.
Substituting the given values, we get:
B = (4π × 10⁻⁷ T m/A) (0.05 A m²) / (4π (0.003 m)³) ≈ 0.164 T
To produce a magnetic field of this strength with a solenoid, we can use the formula for the magnetic field at the center of a solenoid:
B = μ0nI
where n is the number of turns per unit length and I is the current in the solenoid.
The number of turns per unit length is:
n = N / L
where N is the total number of turns (N = 100) and L is the length of the solenoid (L = 12 mm = 0.012 m).
Substituting the given values and solving for I, we get:
I = B / (μ0n) = B L / (μ0N)
= (0.164 T) (0.012 m) / (4π × 10⁻⁷ T m/A) (100)
≈ 0.157 A
Therefore, the solenoid would need to carry a current of about 0.157 A to produce a magnetic field with the dipole strength of the given bar magnet.
Learn more about solenoid
brainly.com/question/15504705
#SPJ11
q21. a bar magnet is falling though a loop of wire with constant velocity. the north pole enters first. as the south pole leaves the loop, the induced current (as viewed from above) will be
The south magnetic pole of a bar magnet enters the wire circle first as it falls vertically through it. As the north pole exits the circle, the induced current (viewed from above) flows anticlockwise. (viewed from above).
Faraday's Law states that whenever the magnetic flux in a coil of wire changes, an induced EMF (electromotive force) manifests itself in the wire, resulting in an induced current. Lenz's Law, which is a corollary of Faraday's Law, states that this induced EMF will flow in the direction that is opposite the shift in magnetic flux that caused it.
According to Lenz's Law, the induced current's direction opposes the shift in magnetic flux that caused it. The magnetic field created by the current induced in the wire loop resists the motion of the magnet, slowing it down. As a consequence, as the north magnetic pole exits the loop, the current moves anticlockwise (when viewed from above).
To know more about bar magnet:
https://brainly.com/question/31275592
#SPJ4
which of the following is a form of potential energy? a. thermal energy b. all the given choices are forms of potential energy c. chemical energy d. an asteroid traveling through space e. a visible light laser beam
Explanation:
The form of potential energy among the given choices is c. chemical energy.
Thermal energy (a) is a form of kinetic energy that results from the motion of particles, while an asteroid traveling through space (d) and a visible light laser beam (e) are forms of electromagnetic radiation, which are also forms of kinetic energy.
On the other hand, chemical energy (c) is the potential energy stored in the chemical bonds between atoms and molecules. This energy can be released through chemical reactions, such as combustion, and can be converted into other forms of energy, such as heat, light, or mechanical energy.
The correct answer is B. All the given choices are forms of potential energy.
Potential energy is the energy possessed by an object due to its position or state. The energy is stored and can be converted into kinetic energy when the object is in motion.
The given options all describe forms of potential energy:
Thermal energy - the energy stored in an object due to its temperature
Chemical energy - the energy stored in the bonds between atoms and molecules
An asteroid traveling through space - the energy possessed by the asteroid due to its position in space
A visible light laser beam - the energy stored in the photons that make up the beam
Therefore, all of the given choices are forms of potential energy.
To know more about potential energy, refer here:
https://brainly.com/question/24284560#
#SPJ11
A baseball team has 25 players. The average mass of a player is 84.4 kg. If this team is riding a bus that is travelling at 26.9 m/s, how much momentum does the team (without the bus) truly have?
What's the Solution?
The baseball team (without the bus) has a momentum of 56,819 kg*m/s.
The momentum of an object is defined as the product of its mass and velocity. To calculate the momentum of the baseball team, we need to find the total mass of the team and the velocity of the team relative to the ground (which is the velocity of the bus since the team is riding on it).
The total mass of the team is given by:
mass of team = number of players x average mass per player
mass of team = 25 players x 84.4 kg/player = 2,110 kg
The velocity of the team relative to the ground is the same as the velocity of the bus, which is given as 26.9 m/s.
Therefore, the momentum of the baseball team is:
momentum = mass x velocity
momentum = 2,110 kg x 26.9 m/s
momentum = 56,819 kg*m/s.
Learn more about momentum here:
https://brainly.com/question/30487676
#SPJ1
a body is moving with constant speed over frictionless horizontal surface. What is the work done by the weight?
Answer:
Zero.
Explanation:
Work done by the weight is Zero, since the force and displacement are at right angles to each other.
question 9 how do we learn the masses of stars? from studying binary star systems. the period and size of the orbit is related to how massive the stars are from using the zeeman effect to learn the magnetic fields of stars and how they are related to stellar 11-year cycles from the isoradius lines on the hr diagram. a larger radius star is always a more massive star from application of the method of parallax, observing the angle shift in a star's position throughout a year
From analyzing binary star systems. The duration and length of the orbit is related to how massive the celebrities are.
Binary star systems are two stars that are gravitationally bound and orbit around a common center of mass. These systems are common throughout the galaxy and make up a significant portion of all known stars. Binary star systems provide valuable insights into stellar evolution and dynamics. They allow astronomers to measure the masses, radii, and temperatures of stars, as well as study the effects of gravitational interactions between them.
There are several types of binary star systems, including visual binaries, spectroscopic binaries, and eclipsing binaries. Visual binaries are pairs of stars that can be seen separately through a telescope. Spectroscopic binaries are detected through their Doppler shift in the spectrum of light they emit. Eclipsing binaries are pairs of stars that periodically eclipse each other, causing variations in their observed brightness.
To learn more about Binary star systemsvisit here:
brainly.com/question/28096563
#SPJ4
Complete Question:-
How do we learn the masses of stars?
a. From application of the method of parallax, observing the angle shift in a star's position throughout a year
b. From studying binary star systems. The period and size of the orbit is related to how massive the stars are
c. From using the Zeeman effect to learn the magnetic fields of stars and how they are related to stellar 11-year cycles
d. From the isoradius lines on the HR diagram. A larger radius star is always a more massive star
what is the resistance of the 0.800 mm -diameter, 4.70 cm -long lead from a mechanical pencil? studysmarter
The resistance of the 0.800 mm-diameter, 4.70 cm-long lead from a mechanical pencil is approximately 20.668 Ω.
To find the resistance of the 0.800 mm-diameter, 4.70 cm-long lead from a mechanical pencil, we'll need to use the formula:
Resistance (R) = Resistivity (ρ) * Length (L) / Area (A)
The resistivity (ρ) of lead is approximately 2.2 x [tex]10^{-7}[/tex]Ωm. The length (L) is given as 4.70 cm, which is equal to 0.047 m. The diameter of the lead is 0.800 mm or 0.0008 m. We can find the area (A) using the formula for the area of a circle:
A = π * (Diameter / 2[tex])^{2}[/tex]
A = π * (0.0008 / 2[tex])^{2}[/tex]
A ≈ 5.027 x 10^-10 [tex]m^{2}[/tex]
Now, we can find the resistance:
R = (2.2 x 10^-7 Ωm) * 0.047 m / (5.027 x 10^-10 m^2)
R ≈ 20.668 Ω
So, the resistance of the 0.800 mm-diameter, 4.70 cm-long lead from a mechanical pencil is approximately 20.668 Ω.
Know more about resistance here:
https://brainly.com/question/17563681
#SPJ11
Indicate whether each choice is correct, incorrect, or cannot be determined.
The categories of each predictions based on the energy diagram made by the student are IC, IC, C, C and CBD
Indicating the categories of each choiceStatement (a): IC
When an electron with a kinetic energy of 13.6 eV interacts with this atom, it will cause the electron in the atom to move to a higher energy level.
To move an electron from the -13.6 eV level to the -0.85 eV level would require a photon with an energy of 12.75 eV, not 13.6 eV.
Statement (b): IC
For the electron in the atom at the -13.6 eV level to move to a higher energy level, it needs to absorb a photon with an energy equal to the difference in energy between the two levels.
A photon with an energy of 13 eV is not sufficient to cause the electron to move to a higher energy level.
Statement (c): C
An electron in the atom at the -0.85 eV level can move to the -3.4 eV level by emitting a photon with an energy equal to the difference in energy between the two levels, which is 2.55 eV.
Statement (d): C
An electron at the -1.5 eV can move to the -0.85 eV level if it absorbs a photon with an energy equal to the difference in energy between the two levels, which is 0.65 eV (not 0.75 eV as predicted).
Statement (e): CBD
e) CBD. Electrons in an atom can only absorb photons of specific energies corresponding to the energy differences between the energy levels of the atom.
Read more about energy levels at
https://brainly.com/question/20337366
#SPJ1
how do changes in the angle between the current and the magnetic field affect the force acting between them?
The force of interaction between a current and a magnetic field is known as the Lorentz force, and it is directly proportional to the angle between the two.
So, when the angle between the current and the magnetic field increases, the force acting between them also increases. This is because the Lorentz force is perpendicular to both the current and the magnetic field, and its magnitude is proportional to the product of the current and the magnetic field strength.
When the angle between the current and the magnetic field increases, the product of the current and the magnetic field strength also increases, leading to a greater force of interaction. On the other hand, when the angle between the two decreases, the force of interaction also decreases.
know more about Lorentz force here
https://brainly.com/question/15552911#
#SPJ11