how many grams of aluminum must react with sulfuric acid to produce 2.6L of hydrogen gas at STP?

Answer:

23205 J or 2.37 × 10⁴ J or 23.7 kJ

Explanation:

The amount of heat required to change the temperature of a substance can be calculated using the formula: q = mcΔT, where q is the heat added, m is the mass of the substance, c is its specific heat capacity, and ΔT is the change in temperature.

The specific heat capacity of iron is 0.44 J/g K1. So, to raise the temperature of 235 g of iron from 25.0°C to 250.0°C (a change of 225°C), you would need to add:

q = (235 g) × (0.44 J/g K) × (225 K) = 23205 J

So you would need to add 23205 joules of heat to raise the temperature of 235 g of iron from 25.0°C to 250.0°C.

The blood alcohol level in mass percent is 0.0956% if 8.33 mL of 0.04988 M [tex]K2Cr2O7[/tex] is required for titration of a 9.9950 g sample of blood.

To calculate the blood alcohol level in mass percent, we need to first determine the amount of ethanol present in the blood sample. This can be done by using a redox titration with potassium dichromate [tex](K2Cr2O7)[/tex], which oxidizes the ethanol to acetic acid.

The balanced chemical equation for the reaction is:

[tex]C2H5OH + 2Cr2O7^2- + 16H+ → 2CO2 + 4Cr^3+ + 11H2O[/tex]

From the balanced equation, we can see that the stoichiometric ratio between [tex]K2Cr2O7[/tex] and ethanol is 2:1. Therefore, the moles of ethanol in the blood sample can be calculated as:

moles of ethanol = 0.5 × moles of [tex]K2Cr2O7[/tex]

The moles of [tex]K2Cr2O7[/tex]can be determined from its concentration and volume used in the titration:

[tex]moles of K2Cr2O7 = 0.04988 mol/L × 8.33 × 10^-3 L = 4.15 × 10^-4 mol[/tex]

Substituting this value into the equation above, we get:

moles of ethanol = 0.5 × 4.15 × 10^-4 mol = 2.075 × 10^-4 mol

The mass of ethanol in the blood sample can be calculated from its molar mass:

[tex]mass of ethanol = 2.075 × 10^-4 mol × 46.07 g/mol = 9.551 × 10^-3 g[/tex]

Finally, the blood alcohol level in mass percent can be titration calculated as:

mass percent = mass of ethanol / mass of blood sample × 100%

mass percent = [tex]9.551 × 10^-3 g / 9.9950 g × 100%[/tex]

mass percent = 0.0956%

Therefore, the blood alcohol level in mass percent is 0.0956%.

Learn more about titration here

https://brainly.com/question/31229711

#SPJ1

The heat that is going to be released in the reaction can be obtained as 930.3 kJ.

The heat of reaction, also known as the enthalpy change of a reaction, is the amount of heat energy that is released or absorbed during a chemical reaction. It is denoted by the symbol ΔH and has units of joules per mole (J/mol) or kilojoules per mole (kJ/mol).

Number of moles of butane = 41.06g/58 g/mol = 0.7 moles

If 2 mole release 2658 kJ

0.7 moles will release 0.7 * 2658/2

= 930.3 kJ

Learn more about heat of reaction:https://brainly.com/question/30464598

#SPJ1

The experiment on determining the effect of soil type on plant growth can be improved by controlling variables such as the amount of sunlight and the pH of water.

Option 1, "Change the amount of water given to each plant," is not a way to improve the experiment because it introduces a new variable that can affect plant growth. If the student wants to test the effect of soil type, then the plants should receive the same amount of water, which is enough to keep the soil moist, but not so much that it causes waterlogging.

Option 2, "Make sure the plants receive the same amount of sunlight," is a way to improve the experiment because sunlight is a factor that can affect plant growth, and therefore, it is important to control the amount of sunlight that each plant receives.

Option 3, "Make sure the plants receive water with the same pH," is also a way to improve the experiment because the pH of water can affect plant growth, and therefore, it is important to keep the pH of water the same for all plants.

Learn more about sunlight here:

https://brainly.com/question/28782526

#SPJ1

1. (a) Consider the following table .

which of the element :

a) is a halogen?

Ans. Element J is halogen.

b) is most likely to be attracted by a magnet?

Ans. Element Y is most likely to be attracted by a magnet.

c) belongs to group I.

Ans. Element X belongs to group 1.

d) would readily form an ion with a double negative charge?

Ans. Element R would readily form an ion with a double negative charge.

e) what type of bond would exist between J and X when they combine?

Ans. Ionic bond would exist between J and X when they combine.

f) how many neutrons are there in Q?

Ans. Atomic number of Q = 13

Mass Number = 27.

Number of neutrons = Mass Number - Atomic number

Number of neutrons = 27 - 13.

Hence, There are 14 neutrons in Element Q.

g) write the formula of the compound formed when R combines with X.

Ans. When R combines with X it forms X₂R.

h) state the element which exist as a diatomic molecule

Ans. Element J exist as a diatomic molecule.

I) select the element which belongs to the d- block of the periodic table

Ans. Element Y belongs to the d- block of the periodic table.

J) write the electronic configuration of the element Y

Ans. Electronic configuration of the element Y is 1s² 2s² 2p⁶ 3s² 3p⁶ 4s¹ 3d⁵ or [Ar] 4s¹ 3d⁵.

Answer:

All of these choices are correct

Carolyn's observations suggest that the Elodea plant produced significantly more bubbles in the sunlit window than it did on her desk. This is likely because Elodea, like all plants, undergoes photosynthesis, a process in which they use sunlight to convert carbon dioxide and water into glucose and oxygen.

The oxygen produced during photosynthesis is released into the water as bubbles, which is what Carolyn observed.

When the Elodea was on Carolyn's desk, it may not have been receiving enough light to undergo photosynthesis at its maximum capacity, resulting in fewer bubbles being produced.

However, when Carolyn moved the aquarium to a sunlit window, the Elodea likely received more light, allowing it to undergo photosynthesis more efficiently, resulting in a higher number of bubbles being produced.

Overall, Carolyn's observations demonstrate the importance of light for plants to undergo photosynthesis and produce oxygen.

Learn more about observations on

https://brainly.com/question/2419635

#SPJ1

Copper ions  and acetate ions make up the chemical known as solid copper (II) acetate . It will dissolve and split into its component ions when placed in water. Moreover, copper (II) acetate is a strong electrolyte, which means that when dissolved in water, it almost entirely separates into ions.

Pb(OAc) 23H₂O, a colorless or white efflorescent monoclinic crystalline material, is the trihydrate that is created when it reacts with water.

Cu₂(OAc)4(H₂O) is a more bluish-green crystalline solid than anhydrous copper(II) acetate. Copper acetates have been utilized as fungicides and green pigments in some way since antiquity. Copper acetates are currently utilized as reagents for  the synthesis of various inorganic and organic compounds.

To know more about compound  visit:-

brainly.com/question/13516179

#SPJ9

The correct answer is a) KBr.

KBr is an ionic compound composed of a metal (K) and a non-metal (Br). When this compound is added to water, the polar water molecules surround the ions in the solid and separate them, which leads to the compound dissolving in water.

What is Ionic Compound?

An ionic compound is a chemical compound composed of ions held together by electrostatic forces called ionic bonds. Ions are atoms or molecules that have gained or lost one or more electrons, giving them a positive or negative charge. In an ionic compound, a positively charged ion (cation) and a negatively charged ion (anion) are attracted to each other to form a stable compound.

CO2, CH4, and O2 are nonpolar molecules, and therefore, do not dissolve well in water. CO2 and O2 are gases at room temperature and pressure, while CH4 is a gas at room temperature but can be liquefied under pressure.

Learn more about Ionic Compound from the given link

https://brainly.com/question/2687188

#SPJ1

The water in this experiment absorbs 20,920 J of energy.

What is Energy?  

Energy is the capacity of a physical system to perform work. It can exist in many forms, such as kinetic energy (the energy of motion), potential energy (energy that is stored), thermal energy (energy in the form of heat), electrical energy, and more. Energy can be transformed from one form to another, but it cannot be created or destroyed, only transferred or converted.

To calculate the energy absorbed by the water, we can use the formula:

Q = m * c * ΔT

Where Q is the energy absorbed, m is the mass of the water, c is the specific heat of water, and ΔT is the change in temperature.

Given:

Mass of water (m) = 200.0 g

Specific heat of water (c) = 4.18 J/g°C

ΔT = T₂ - T₁ = 45.1°C - 20.1°C = 25.0°C

Using the formula:

Q = 200.0 g * 4.18 J/g°C * 25.0°C = 20,920 J

Learn more about Energy from the given link

https://brainly.com/question/2003548

#SPJ1

A sample of ammonia gas has a final temperature of 313.25K.

The Combined Gas Law is a combination of the Ideal Gas Law and Charles’s Law. It states that the ratio of the pressure of a gas, its volume, and its temperature is constant, provided the amount of gas and the molar mass of the gas remain the same. The combined gas law states that the ratio of the product of pressure and volume of a gas is equal to the product of the pressure and volume of the same gas at a different temperature.

Rearranging the equation to solve for T2, we have:

[tex]T2 = \frac{(P1V1T1)}{P2V2}[/tex]

Substituting the given values, P1 has value 3.84 atm,V1 has value 250mL,P2 has value 5.84 atm,V2 has value 215mL and T1 has value (35+273) degrees, we have:

[tex]T2 = \frac{(3.84 * 250 * 35 + 273) }{ (5.84 * 215)}\\T2 = 313.25 K[/tex]

Therefore,The final temperature of a sample of ammonia gas is 313.25K

learn more about Combined Gas Law Refer:brainly.com/question/30458409

#SPJ1

Answer:

88.55%

Explanation:
4.9995 g of crude material contain 4.4275 g of NaOH, therefore  

4.4275/4.9995 = 88.55%

⋅

Answer:

Atomic emission is more sensitive to flame instability than atomic absorption because during atomic emission, the intensity of the emitted light is proportional to the concentration of the element being measured. If the flame is unstable, it can cause fluctuations in the intensity of the light being emitted, which can lead to errors in the measurement of the element's concentration. In contrast, in atomic absorption, the intensity of the absorbed light is measured, which is less sensitive to flame instability since the amount of light absorbed by the element is proportional to its concentration regardless of the flame's stability.

Answer:

Atomic emission is more sensitive to flame instability than atomic absorption because atomic emission is based on the analysis of light emitted from excited atoms in the flame. In contrast, atomic absorption is based on light absorption by the flame's particles.

Flame instability can lead to changes in the temperature and pressure of the flame, which can affect the excited states of the atoms in the flame. When the flame is unstable, it can cause fluctuations in the number of excited atoms and the length of time they stay excited. This, in turn, can lead to fluctuations in the amount of light emitted by the excited atoms, making it more difficult to accurately measure the analyte concentrations in the sample using atomic emission spectroscopy.

On the other hand, atomic absorption spectroscopy is less sensitive to flame instability because the light absorption by the atoms in the flame is not as dependent on the excitation states of the atoms. The atoms in the flame absorb light at specific wavelengths regardless of their excited states. Hence, fluctuations in the excited state populations have less of an impact on the absorption signal. However, atomic absorption spectroscopy can still be affected by other factors, such as changes in the temperature and pressure of the flame and the presence of other interfering species in the sample.

6.86 g of hydrochloric acid would be neutralized by 5.50 g of magnesium hydroxide.

The balanced chemical equation for the reaction between magnesium hydroxide and hydrochloric acid is:

Mg(OH)₂(s) + 2HCl(aq) → MgCl₂(aq) + 2H₂O(l)

From the equation, we can see that 1 mole of Mg(OH)₂ reacts with 2 moles of HCl. We can use the molar mass of Mg(OH)₂ to convert its mass to moles:

moles of Mg(OH)₂ = mass / molar mass = 5.50 g / 58.32 g/mol = 0.0942 mol

Since 1 mole of Mg(OH)₂ reacts with 2 moles of HCl, we know that twice as many moles of HCl will be neutralized:

moles of HCl neutralized = 2 × moles of Mg(OH)₂ = 2 × 0.0942 mol = 0.1884 mol

Finally, we can use the molar mass of HCl to convert the moles of HCl to grams:

mass of HCl neutralized = moles of HCl × molar mass = 0.1884 mol × 36.46 g/mol = 6.86 g

Therefore, 6.86 g of hydrochloric acid would be neutralized by 5.50 g of magnesium hydroxide.

learn more about neutralization here

https://brainly.com/question/23008798

#SPJ1

Explanation:

The titration of acetic acid with KOH is a weak acid-strong base titration. At the beginning of the titration (part a), we have only acetic acid in the solution, and its concentration is 0.200 M. As we add KOH, it reacts with acetic acid to form acetate and water:

CH3COOH + KOH → CH3COOK + H2O

The acetate ion is the conjugate base of acetic acid and can be considered a weak base. We can use the following equation to calculate the pH of the resulting solution at each point of the titration:

pH = pKa + log([A^-]/[HA])

where pKa is the acid dissociation constant of acetic acid (1.8 × 10^-5), [A^-] is the concentration of acetate ion, and [HA] is the concentration of undissociated acetic acid.

a) At the beginning of the titration (0.0 mL of KOH added), the solution contains only acetic acid. Therefore, [HA] = 0.200 M and [A^-] = 0 M.

pH = pKa + log([A^-]/[HA])

pH = -log(1.8 × 10^-5) + log(0/0.200)

pH = 2.40

The pH of the solution is 2.40.

b) When 50.0 mL of 0.100 M KOH is added, we have added 5.00 mmol of KOH. This amount of KOH reacts with 5.00 mmol of acetic acid, and the remaining 0.050 mol - 0.005 mol = 0.045 mol of acetic acid remains in the solution. At the same time, 0.005 mol of acetate ion is formed.

[HA] = 0.045 mol / 0.100 L = 0.450 M

[A^-] = 0.005 mol / 0.100 L = 0.050 M

pH = pKa + log([A^-]/[HA])

pH = -log(1.8 × 10^-5) + log(0.050/0.450)

pH = 4.41

The pH of the solution is 4.41.

c) When 100.0 mL of 0.100 M KOH is added, we have added 10.00 mmol of KOH. This amount of KOH reacts with 10.00 mmol of acetic acid, and there is no acetic acid remaining in the solution. At the same time, 0.010 mol of acetate ion is formed.

[HA] = 0 mol / 0.100 L = 0 M

[A^-] = 0.010 mol / 0.100 L = 0.100 M

pH = pKa + log([A^-]/[HA])

pH = -log(1.8 × 10^-5) + log(0.100/0)

pH = 4.74

The pH of the solution is 4.74.

d) When 110.0 mL of 0.100 M KOH is added, we have added 11.00 mmol of KOH. This amount of KOH reacts with 10.00 mmol of acetic acid, and there is an excess of 1.00 mmol of KOH in the solution. This excess KOH completely dissociates to give 1.00 mmol of OH^- ion. At

Yes, carbon dioxide (CO₂) is involved in environmental problems such as the Greenhouse Effect. However, CO₂ is not directly linked to the Ozone Hole, Acid Rain, Air Pollution, or Water Pollution.

Carbon dioxide is a greenhouse gas that naturally occurs in the Earth's atmosphere, but human activities such as burning fossil fuels (coal, oil, and gas), deforestation, and land use changes have significantly increased its concentration, trapping more heat in the atmosphere and leading to global warming.

To curb the amount of excess carbon dioxide, individuals and governments can take several actions, such as: Reducing energy consumption by using energy-efficient appliances, turning off lights and electronics when not in use, and using public transportation, walking or cycling instead of driving, Switching to clean, renewable energy sources such as solar, wind, and hydropower to reduce the use of fossil fuels, Promoting afforestation and reforestation to absorb carbon dioxide from the atmosphere and restore natural ecosystems, Encouraging sustainable agriculture practices that reduce carbon emissions from livestock and soil.

By taking such actions, we can curb the amount of excess carbon dioxide and mitigate the impact of global warming and climate change.

Learn more about energy here:

https://brainly.com/question/1932868

#SPJ9

Selection is the process by which we filter out irrelevant information and focus on the information that is most relevant to us.

For example, when we walk down a busy street, we may not pay attention to every detail of every building or person we pass by. Instead, we might focus on things that stand out, such as a bright billboard or an interesting conversation nearby.

Regarding stereotypes, one common example is the belief that all individuals from a certain race, gender, or religion share certain characteristics or behaviors. This stereotype is often based on limited or inaccurate information and can lead to biased judgments and discrimination. It's essential to recognize and challenge our own stereotypes to avoid unfairly treating others based on their group membership.

Learn more about selection here: https://brainly.com/question/14874301

#SPJ1

Solution and Justification: 2.5103mol 25 mL at 0.100 M NaOH N an O H solution contain 2.5 10 3 mol of NaOH N an O H.

The amount of NaOH that needs to be dissolved to make 25 ml or 0.5M NaOH solution is 0.02*25, or 0.5g. In order to create a 0.5M NaOH solution, 0.5g or NaOH should be mixed in 25 ml of water.

For instance, if someone asked me to estimate how many moles are present in 20 ml of a 1M NaOH solution, I would normally reply that the answer is 20 mmol since 20 ml/1000 ml/L x 1M (= 0.02 moles = 20 mol) is the formula. Uncomplicated! You receive an injection of one mole of NaOH. The measurement is in mol / l.

To know more about solution visit:

https://brainly.com/question/30665317

#SPJ1

The molar entropy from the question that we have here is 85.1kJ/K.mol as shown.

The molar entropy of a substance can be calculated by dividing the total entropy of the substance by the number of moles present. The entropy of a substance can be determined experimentally by measuring its heat capacity or by analyzing its thermodynamic behavior under different conditions.

We know that;

Entropy = ΔH/T

= 1.6 * 10^4 * 10^3J/mol/187.95 K

= 85.1kJ/K.mol

For the bromide ion;

Rate = 5/1 * 2.7 * 10^-3 mol/s

= 1.35 * 10^-2 mol/s

Learn more about entropy:https://brainly.com/question/13135498

#SPJ1

As may be shown, the molar entropy from the question is 85.1 kJ/K.mol.

By dividing the substance's overall entropy by the quantity of moles present, one can determine a substance's molar entropy. By measuring a substance's heat capacity or by examining its thermodynamic behavior under various circumstances, one can empirically ascertain the entropy of that substance.

Entropy = ΔH/T

= 1.6 * 10^4 * 10^3J/mol/187.95 K= 85.1kJ/K.mol

b) If we have the Br- ion;

Rate = 5/1 * 2.7 * 10^-3 mol/s

= 1.35 * 10^-2 mol/s

Learn more about entropy:brainly.com/question/13135498

#SPJ1

Answer:

catalysts do not shift the equilibrium position of a chemical reaction because they do not affect the free energy difference between reactants and products

Explanation:

To understand this better, let's consider an example. The Haber process is used to produce ammonia from nitrogen and hydrogen gas:

N2(g) + 3H2(g) ⇌ 2NH3(g)

This reaction is exothermic, meaning that it releases heat. According to Le Chatelier's principle, adding heat to an exothermic reaction will shift the equilibrium position towards the reactants (N2 and H2). Conversely, removing heat from the system will shift the equilibrium position towards the products (NH3).

Now, let's say we add a catalyst to this reaction. The catalyst will speed up both the forward and reverse reactions equally, without affecting their relative rates. This means that although the reaction will reach equilibrium faster with a catalyst present, it will still reach the same equilibrium position as it would without a catalyst.

the answer is 0.652 mol.

How to solve this problem?

To solve this problem, we need to use the ideal gas law, which relates the pressure, volume, temperature, and number of moles of a gas:

PV = nRT

where P is the pressure, V is the volume, n is the number of moles, R is the gas constant, and T is the absolute temperature.

First, we need to convert the temperature to Kelvin by adding 273.15 to the Celsius temperature:

T = 105 + 273.15 = 378.15 K

Next, we can rearrange the ideal gas law to solve for the number of moles:

n = PV/RT

Substituting the given values, we get:

n = (170.0 kPa)(3.35 L)/(8.31 J/mol K)(378.15 K)

n = 0.652 mol

Therefore, the answer is 0.652 mol.

In physics and chemistry, volume refers to the amount of three-dimensional space that a substance or object occupies. It is a physical quantity that is usually measured in units of cubic meters (m³) or its derived units such as liters (L) or milliliters (mL). The volume of a substance or object can be calculated by measuring its dimensions (length, width, and height) and applying the appropriate formula, such as V = l × w × h for a rectangular solid. In the case of a gas, the volume can be determined by measuring the container that holds the gas or by using other techniques such as the displacement method, where the volume of a gas is determined by measuring the volume of liquid that it displaces. The volume of a substance is an important parameter that affects its properties and behavior, such as its density, pressure, and temperature.

To know more about volume visit :-

https://brainly.com/question/463363

#SPJ1

(a) Partial pressure of Ne is 470 torr. (b) Partial pressure of of CF₄ is 110 torr. (c) Total pressure is 580 torr. (d) Mole fraction of Ne is 0.621.

(a) The initial pressure of Ne is 470 torr, so the partial pressure of Ne after mixing is also 470 torr.

(b) The initial pressure of CF₄ is 110 torr, so the partial pressure of CF₄ after mixing is also 110 torr.

(c) The total pressure is the sum of the partial pressures of the two gases:

Total pressure = partial pressure of Ne + partial pressure of CF₄

Total pressure = 470 torr + 110 torr

Total pressure = 580 torr

(d) To find the mole fraction of Ne, we need to know the number of moles of Ne and CF₄. We can use the ideal gas law to find the number of moles of each gas:

PV = nRT

n = PV/RT

For Ne:

n = (470 torr x 1.50 L)/(0.0821 L·atm/mol·K x 298 K)

n = 19.25 mol

For CF₄:

n = (110 torr x 2.50 L)/(0.0821 L·atm/mol·K x 298 K)

n = 11.72 mol

The total number of moles is:

nTotal = nNe + nCF₄

nTotal = 19.25 mol + 11.72 mol

nTotal = 30.97 mol

The mole fraction of Ne is:

XNe = nNe/nTotal

XNe = 19.25 mol/30.97 mol

XNe = 0.621

Therefore, the mole fraction of Ne is 0.621.

To know more about partial pressure please refer: https://brainly.com/question/16749630

#SPJ1

The partial pressure of IBr after equilibrium is reached is:

P_IBr = 0.029 - x = 0.0265 atm.

What is Equilibrium?

In chemistry, equilibrium refers to a state in which the rates of the forward and reverse reactions are equal, resulting in a stable concentration of products and reactants. In other words, equilibrium occurs when the concentrations of reactants and products remain constant over time. The concept of equilibrium is important in many areas of chemistry, including chemical reactions, acid-base equilibria, and solubility equilibria.

We can start by setting up an ICE table:

2IBr(g) I2(g) Br2(g)

Initial 0.029 atm 0 atm 0 atm

Change -x +x +x

Equil. 0.029-x x x

The equilibrium constant expression for the reaction is:

Kp = (P_I2 * P_Br2) / P_IBr^2

At equilibrium, the partial pressures are:

P_I2 = P_Br2 = x

P_IBr = 0.029 - x

Substituting these expressions into the equilibrium constant expression gives:

8.5×10^-3 = (x * x) / (0.029 - x)^2

Solving for x gives:

x = 0.0025 atm

Learn more about Equilibrium from the given link

https://brainly.com/question/517289

#SPJ1

Both the initial heat transfer when the piston initially contacts the stops and the overall heat transfer throughout the procedure are -11,172 kJ.

h1 = 3279.1 kJ/kg

h2 = 751.6 kJ/kg

Q = ΔU = m(u2 - u1) (u2 - u1)

where m is the steam's mass.

We may use the ideal gas law to determine the mass of the steam:

PV = mRT

PV/(RT) = (3.5 MPa) (0.33 m3)/(0.287 kJ/kg-K) (380.4 K) = 4.47 kg for the formula m.

We can now determine the rate of heat transfer:

Q is equal to m(u2 - u1) = (4.47 kg)(751.6 kJ/kg - 3279.1 kJ/kg) = -11,172 kJ

Heat is leaving the system, as indicated by the negative sign.

To learn more about piston-cylinder device visit:

brainly.com/question/22969319

#SPJ9

The mass of chlorine in 25kg of [tex]CFCl_3[/tex] is 6,435g where mass is a measure of the amount of matter in an object. It is measured in kilograms (kg) or grams (g).

The mass of [tex]CFCl_3[/tex] = 25kg

The molecular weight of [tex]CFCl_3[/tex] (also known as Freon-11) is = 137.37 g/mol.

It means one mole of [tex]CFCl_3[/tex] = 137.37 g.

Since chlorine is an element, one mole of chlorine is equal to its atomic weight, which is 35.45 g/mol.

Therefore, number of moles 25 kg of [tex]CFCl_3[/tex] contains =

(25 kg) / (137.37 g/mol) = 182.4 mol of [tex]CFCl_3[/tex].

To calculate the mass of chlorine in 25 kg of [tex]CFCl_3[/tex], we need to multiply the number of moles of chlorine by its atomic weight.

The mass of chlorine in 25 kg of [tex]CFCl_3[/tex] is = 182.4 mol * 35.45 g/mol = 6,435 g of chlorine.

Hence, the mass of chlorine in 25 kg of [tex]CFCl_3[/tex] is 6,435 g.

To learn more about mass click here https://brainly.com/question/11622869

#SPJ1

Answer:More purple

Explanation: Its more purple

The number of moles of acetic acid which has a molar mass of 60.05 g/mol present in 16.84 grams of acetic acid is 3.56.

Given the molar mass of Acetic acid (M) = 60.05 g/mol.

The mass of acetic acid (m) = 16.84g

Let the number of moles = n

A mole is a unit of measurement used in chemistry to measure amount of substance. It is calculated as molar mass by mass of the given substance. The mole is defined as the amount of a substance that contains as many elementary entities (atoms, molecules, ions, etc.) as there are atoms in exactly 12 grams of carbon-12. One mole of a substance contains this number of particles, and can be used to calculate the mass of a given sample of the substance.

n = 60.05/16.84 = 3.56 moles

Hence the required number of moles are 3.56.

To learn more about molar mass click here https://brainly.com/question/12127540

#SPJ1

Answer:

9 ans

Explanation:

cold 20 -11 =9 ans

summer 20-11=9 ans

Answer:

Green Bean Casserole is a classic.

The family recipe has passed down from one great-aunt to another.
Now it's causing gas and bloating across multiple generations of the family.

Explanation: