Answer:Mitosis is the process in which a single cell divides to form two identical cells, while meiosis is a type of cell division that results in four daughter cells with half the number of chromosomes as the parent cell.
Explanation:
What is the final volume of NaOH solution prepared from 250.0 mL of 0.300 M NaOH if you wanted the final concentration to be 0.150 M ?
The final volume of the NaOH solution is 500.0 mL.
To prepare a solution with a desired concentration, we can use the formula:
C = n/V
where C is the concentration in units of moles per liter (M), n is the number of moles of solute, and V is the volume of the solution in liters. Rearranging this formula, we get:
n = C x V
This formula tells us that we can find the number of moles of solute we need by multiplying the desired concentration (C) by the desired volume (V) of the solution.
To calculate the final volume of the NaOH solution, we can use the following equation:
M1V1 = M2V2
where M1 and V1 are the initial concentration and volume, respectively, and M2 and V2 are the final concentration and volume, respectively.
Substituting the given values into the equation, we get:
(0.300 M) (250.0 mL) = (0.150 M) (V2)
Solving for V2, we get:
V2 = (0.300 M × 250.0 mL) / (0.150 M)
V2 = 500.0 mL.
Learn more about concentration here:
https://brainly.com/question/10725862
#SPJ1
Calculate the mass of water produced when 5.13g of butane reacts with excess oxygen
Explanation:
The balanced chemical equation for the combustion of butane is:
2C4H10 + 13O2 → 8CO2 + 10H2O
From the equation, we can see that for every 2 moles of butane that react, 10 moles of water are produced.
To find the mass of water produced when 5.13g of butane reacts, we need to first convert the mass of butane to moles:
5.13g of butane / molar mass of butane (58.12 g/mol) = 0.0883 moles of butane
Since there is excess oxygen, we can assume that all of the butane will react completely, so we can use the mole ratio from the balanced equation to find the number of moles of water produced:
0.0883 moles of butane × (10 moles of water / 2 moles of butane) = 0.4415 moles of water
Finally, we can convert the moles of water to grams:
0.4415 moles of water × molar mass of water (18.02 g/mol) = 7.95g of water
Therefore, the mass of water produced when 5.13g of butane reacts with excess oxygen is 7.95g.
Hopes this helps
Explain how melting point determination could be used to distinguish between a pure Sample and an impure sample
Answer: Melting point determination can be used to distinguish between a pure sample and an impure sample because the presence of impurities will usually lower the melting point of a substance.
Explanation:
When a pure substance is heated, it will begin to melt at a specific temperature known as its melting point. However, when an impure substance is heated, the presence of impurities will cause the melting point to decrease and the substance to melt over a range of temperatures.
Therefore, by comparing the melting point of a sample to the known melting point of a pure substance, we can determine whether the sample is pure or impure. If the sample has the same melting point as the pure substance, then it is likely pure. However, if the sample melts over a range of temperatures or at a lower temperature than the pure substance, then it likely contains impurities.
6. Which substance is soluble in water?
A. Pb(CO3)2
B. Ag3PO4
C. Sn(CrO4)2
D. NH4CI
Substance is soluble in water is D. NH₄CI. Soluble in water means that is capable of dissolving in water.
What does soluble in water mean?Substance is soluble if it dissolves in certain fluids and the fluid [gas or liquid] (present in excess) is called solvent and substance dissolved in it is called solute which together forms solution. Process of dissolving is called the solvation.
If substance is soluble, then it implies that it can be dissolved in liquid. This means particles are broken down to become so small that we can no longer see them. Salt and sugar are examples of soluble materials. Opposite of soluble is insoluble ( that is a substance that cannot be dissolved).
To know more about soluble, refer
https://brainly.com/question/23946616
#SPJ1
We wish to determine the moles of carbon dioxide
produced when 50.0 mL of 2.0 M hydrochloric
acid reacts with excess sodium carbonate.
2HCl(aq) + Na₂CO3(aq) → 2NaCl(aq) + H₂O(1) + CO₂(g)
->
In the previous step, you determined
0.10 mol HCI react.
How many moles of carbon dioxide form during
the reaction?
Moles CO₂
Enter
Answer: .05
Explanation:
How many bromine atoms are present 35.2 g of CH2Br2?
Can someone explain how to get answers with steps.
Answer:
There are approximately 2.448 x 10^23 bromine atoms present in 35.2 g of CH2Br2.
Explanation:
The molar mass of CH2Br2 can be calculated as follows:
Molar mass of C = 12.01 g/mol
Molar mass of H = 1.01 g/mol
Molar mass of 2 Br = 2 x 79.90 g/mol = 159.80 g/mol
Therefore, the molar mass of CH2Br2 = 12.01 + 1.01 + 159.80 = 172.82 g/mol
Next, we can calculate the number of moles of CH2Br2 as follows:
moles of CH2Br2 = mass of CH2Br2 / molar mass of CH2Br2
moles of CH2Br2 = 35.2 g / 172.82 g/mol
moles of CH2Br2 = 0.203 moles
Finally, we can use Avogadro's number to calculate the number of bromine atoms present:
Number of bromine atoms = moles of CH2Br2 x 2 (since there are 2 bromine atoms per molecule of CH2Br2) x Avogadro's number
Number of bromine atoms = 0.203 x 2 x 6.022 x 10^23
Number of bromine atoms = 2.448 x 10^23 bromine atoms
Therefore, there are approximately 2.448 x 10^23 bromine atoms present in 35.2 g of CH2Br2.
Choose two non-renewable resources from the article and explain why these are non-renewable.
Two non-renewable resources are coal and petroleum. A natural resource that cannot be easily replaced by natural means quickly enough to keep up with use is referred to as a non-renewable resource (also known as a finite resource).
What are non-renewable resources?A natural resource that cannot be easily replaced by natural means quickly enough to keep up with use is referred to as a non-renewable resource (also known as a finite resource). Fossil fuels made of carbon are one instance. With the use of heat and pressure, the original biological matter transforms into a fuel like petrol or oil. Although individual elements are always conserved, earth minerals and metal ores, fossil fuels (coal, petroleum, and natural gas), and groundwater in some aquifers are all regarded as non-renewable resources (except in nuclear reactions, nuclear decay or atmospheric escape). Coal, crude oil, and natural gas are examples of natural resources that take thousands of years to naturally produce and cannot be replaced as quickly as they are used up.
How is petroleum formed?The remains of animals that have been submerged for millions of years deep within the earth's crust give rise to petroleum.
These species, which include different kinds of plants and animals, progressively dissolved over time.
These remnants turned into petroleum as a result of the intense heat, pressure, and lack of air.
Although petroleum is manufactured over millions of years, we also use it at a faster rate than it is created.
They are therefore non-renewable resources.
To know more about fossil fuels, visit:
https://brainly.com/question/3371055
#SPJ1
Complete question:
Choose two non-renewable resources from the article and explain why these are non-renewable.
a) Water
b) Electricity
c) Wind
d) Petroleum
e) Coal
MUST BE CORRECT AND DONE ASAP 100 POINTS
NOT AI WRITTEN
About two electrons can have that quantum number.
Mg has the highest IE2 while Al has the highest IE3
The order of increasing atomic radius is; Cl> Te^2- >Te > S
What are the quantum numbers?Quantum numbers are a set of four parameters that are used to describe the state of an electron in an atom. They describe the energy, orbital shape, orientation, and spin of an electron in an atom. The four quantum numbers are:
Principal quantum number (n): This quantum number describes the energy level of an electron in an atom. It can take on any positive integer value, with higher values indicating higher energy levels. The principal quantum number determines the size of the electron's orbital.
Azimuthal quantum number (l): This quantum number describes the shape of the electron's orbital. It can take on values from 0 to (n-1).
Magnetic quantum number (m): This quantum number describes the orientation of the electron's orbital in space. It can take on values from -l to +l.
Spin quantum number (s): This quantum number describes the intrinsic angular momentum, or "spin," of the electron. It can have a value of +1/2 or -1/2, indicating the direction of the electron's spin.
Learn more about quantum number:https://brainly.com/question/16977590
#SPJ1
to lower the impacts of climate change we can do the following activities:
1
2
3
4
5
science plss help
Answer:
1. Know your carbon footprint.
2. Travel less.
3. Eat less meat and focus on sustainably grown meat.
4. Create less waste.
5. Recycle more and create less trash.
At STP, how many moles of helium gas would occupy 60 L?
Answer:
At STP (standard temperature and pressure), one mole of any gas occupies 22.4 liters. Therefore, to determine the number of moles of helium gas that would occupy 60 L at STP, we can use the following conversion factor:
1 mole He gas = 22.4 L He gas at STP
So, we can set up the following proportion:
x moles He gas / 60 L He gas = 1 mole He gas / 22.4 L He gas
where x is the number of moles of helium gas we want to find.
To solve for x, we can cross-multiply and simplify:
x moles He gas = (60 L He gas)(1 mole He gas / 22.4 L He gas)
x moles He gas = 2.68 moles He gas (rounded to two decimal places)
Therefore, 2.68 moles of helium gas would occupy 60 L at STP.
If you start with 1.629 g of salicylic acid what is the theoretical yield of aspirin?
Answer:
the theoretical yield of aspirin from 1.629 g of salicylic acid is 2.13 g.
Low density lipoproteins is often called bad cholesterol because it
Answer:
Contributes to the buildup of plaque in the walls of arteries. This plaque buildup can narrow the arteries and increase the risk of heart disease, heart attack, and stroke.
You just worked on collecting evidence to answer the Investigation Question: How is something different when it is warmer or cooler? How did the experiment with the cold and warm water change your thinking about the Investigation Question?
My experiment with the cold and warm water changed my thinking about the Investigation Question because it showed me that the temperature of something can have a major impact on its properties.
Experiment with cold and warm waterFor example, warm water was more buoyant than cold water, which meant that the warmer water was able to float objects that the colder water could not. This showed me that temperature can play a role in the physical properties of an object, making it either lighter or heavier, depending on the temperature.
My experiment with cold and warm water showed me that temperature can have a major effect on physical properties. When comparing cold and warm water, I found that the warmer water was more buoyant and was able to float objects that the colder water could not.
This demonstrated to me how temperature can impact the weight and buoyancy of an object, making it either lighter or heavier depending on the temperature.
Learn more Experiment here:
https://brainly.com/question/17274244
#SPJ1
How many moles of carbon atoms are there in 0.388 mole of C2H6?
0.776 moles of carbon atoms are present in 0.388 mole of [tex]C_2H_6[/tex]. A mole is a unit of measurement used in chemistry to measure an amount of a substance.
Given the number of moles in [tex]C_2H_6[/tex] = 0.388
There are 2 carbon atoms per molecule in [tex]C_2H_6[/tex].
Hence, the number of moles of carbon atoms can be calculated by multiplying the number of moles of [tex]C_2H_6[/tex] by the number of carbon atoms per molecule present in [tex]C_2H_6[/tex].
A mole is equal to the number of atoms, molecules, or other particles in one mole of a substance.
Number of moles of carbon atoms = Number of moles of [tex]C_2H_6[/tex] * (2 atoms of Carbon (C) / 1 mole of [tex]C_2H_6[/tex])
Number of moles of carbon atoms = 0.388 moles of [tex]C_2H_6[/tex] * 2 atoms of carbon/molecule of [tex]C_2H_6[/tex]
Number of moles of carbon atoms = 0.776 moles of carbon atoms
To learn more about carbon click here https://brainly.com/question/22530423
#SPJ1
I have discovered a new compound which I have named MidasEne. It has the ability to magically turn everything that it touches into gold. I am trying to keep the formula proprietary, but you are smart, and you have figured out that my compound has a molar mass of 1,080.54 grams/mol and an empirical formula of C3H4O5. So what is the molecular formula of my secret compound?
Answer:
molecular formula = C₂₇H₃₆O₄₅
Explanation:
In order to find the molecular formula of a compound from its empirical formula, we need to know the number of "empirical formula units" that are in the molecular formula.
To find the number of empirical formula units, n, we use the following formula:
[tex]\boxed{\mathrm{n = \frac{molar \ mass}{empirical \ formula \ mass}}}[/tex].
The empirical formula mass is simply the molar mass of the compound that is represented by the empirical formula. Therefore, in this case,
Empirical formula mass of C₃H₄O₅ = (12 × 3) + (1 × 4) + (16 × 5)
= 36 + 4 + 80
= 120
Next, we can find the value of n using the above formula:
n = [tex]\frac{1080.54}{120}[/tex]
= 9.00
Now that we know the number of empirical formula units (n) present in the molecular formula, we simply have to multiply the number of each element present in the empirical formula by n:
Molecular formula = (empirical formula)ₙ
⇒ Molecular formula = (C₃H₄O₅)₉
= C₂₇H₃₆O₄₅
Therefore, the molecular formula of the secret compound is C₂₇H₃₆O₄₅.
For: X → Z What is the proposed rate law A. rate = k[x]a[z]bB. rate = k[A]xC. rate = k[X]Z D. none of these
The rate law can only be determined experimentally through the method of initial rates or by determining the order of the reaction with respect to each reactant. Therefore, the correct answer is D. none of these.
In chemical kinetics, the rate law is an equation that relates the rate of a chemical reaction to the concentration of reactants. It is usually determined experimentally by measuring the initial rates of the reaction under different conditions of reactant concentration, temperature, and pressure.
The general form of a rate law for a reaction involving one or more reactants can be written as follows:
rate = k[A]x[B]y[C]z...
where rate is the rate of the reaction, k is the rate constant, [A], [B], [C]... are the concentrations of the reactants, and x, y, z... are the orders of the reaction with respect to each reactant.
In the given reaction X → Z, we are not given any information about the specific reaction mechanism or the dependence of the rate on the concentrations of X and Z. Therefore, it is not possible to determine the rate law without experimental data.
To determine the rate law experimentally, we would need to measure the initial rates of the reaction under different conditions of reactant concentrations and analyze the data to determine the orders of the reaction with respect to each reactant. Based on the experimental results, we could propose a rate law that fits the data and determine the value of the rate constant k.
Learn more about concentrations here:
https://brainly.com/question/10725862
#SPJ1
Based on the information in the graph, which atom listed below is the most
stable?
Answer:
Iron-56 has the greatest binding energy per nucleon while Hydrogen-3 has the lowest based on the information in the graph of average binding energy per nucleon against number of nucleons in nucleus. We know that the the greater the amount of binding energy per nucleon the greater the nuclear stability is, thus Iron-56 is the most stable atom among Helium-4, Uranium-238 and Hydrogen-3.
Explanation:
Balance
Pb(NO3)2 + NaCl PbCl2+ NaNO3
The balanced chemical equation for the reaction between Pb(NO3)2 and NaCl is:
Pb(NO3)2 + 2NaCl -> PbCl2 + 2NaNO3
In order for a chemical equation to be balanced, the number of atoms of each element in the reactants must be equal to the number of atoms of each element in the products.
In the given equation, there are one Pb atom, two Na atoms, two Cl atoms, two N atoms, and six O atoms on the left-hand side (reactants) of the equation. On the right-hand side (products) of the equation, there are one Pb atom, two Na atoms, two Cl atoms, two N atoms, and six O atoms.
To balance the equation, we need to adjust the coefficients (the numbers in front of the chemical formulas) so that the number of atoms of each element is the same on both sides. In this case, we need to add a coefficient of 2 in front of NaCl on the reactant side to balance the number of Cl atoms, which also adds 2 Na and 2 NO3 atoms. This gives us:
Pb(NO3)2 + 2NaCl -> PbCl2 + 2NaNO3
Now the equation is balanced because there are the same number of atoms of each element on both the reactant and product sides.
Learn more about chemical equation here:
https://brainly.com/question/30087623
#SPJ1
What is the pH of a solution with an H+ ion concentration of 2.5e-4?
Answer: pH=-log[H+]
pH=-log(2.5x10^-4)
pH=3.6
Explanation:
Need help with problem
The number of moles of CO in the given conditions is 2.51 moles. To calculate the number of moles of CO in the given conditions, we need to use the Ideal Gas Law equation:
PV = nRT
Where:
P = pressure
V = volume
n = number of moles
R = gas constant
T = temperature
First, we need to convert the given temperature in Celsius to Kelvin by adding 273.15:
T = 93°C + 273.15 = 366.15 K
Now we can plug in the values we have:
P = 4.52 atm
V = 20.0 L
R = 0.0821 L.atm/mol.K (gas constant for CO)
T = 366.15 K
n = PV/RT = (4.52 atm x 20.0 L)/(0.0821 L.atm/mol.K x 366.15 K) = 2.51 moles
Therefore, the number of moles of CO in the given conditions is 2.51 moles.
To know more about Ideal Gas Law, visit:
https://brainly.com/question/28257995
#SPJ1
What is the average experimental volume per mole of carbon dioxide calculated for sodium carbonate and sodium bicarbonate?
Answer: 24.356L/mol.
Explanation: Hence, the average experimental volume per mole of carbon dioxide for sodium carbonate and sodium bicarbonate is 24.356L/mol.
what is parallax errors sometimes called
Answer: They are sometimes called sighting errors
Explanation:
write a brief statement that refers to the purpose of the experiment
Purpose: To find Heat of Solution of sodium hydroxide and to find the heat of neutralization between sodium hydroxide and hydrochloric acid, using enthalpy, Qsurr & Qrxn, percent error, etc.
experiment 1 findings:
50mL water
2.00g of sodium hydroxide
T (temp) initial = 20 degrees C
T (temp) final = 28.5 degrees C
experiment 2 findings:
50mL of 0.75 concentration M HCl
T (temp) initial = 23.5 degrees C
T (temp) final = 27 degrees C
The experiment involved measuring the temperature changes of water and solutions containing sodium hydroxide and hydrochloric acid.
What is HCl?
HCl is the chemical formula for hydrogen chloride, a colorless, highly pungent gas. It is a strong acid that is commonly used in industry for a variety of applications, such as the production of PVC, food processing, and metal cleaning. It is also found naturally in the stomach as a component of gastric acid, where it aids in digestion. In water, HCl dissociates into H+ and Cl- ions, making it a strong electrolyte.
The purpose of the experiment was to determine the heat of solution of sodium hydroxide and the heat of neutralization between sodium hydroxide and hydrochloric acid, using various methods such as enthalpy, Qsurr & Qrxn, percent error, etc.
Learn more about HCl from the given link
https://brainly.com/question/27576431
#SPJ1
Consider the incomplete structure. Add formal charges as necessary to the structure. All unshared valence electrons are shown. Do not alter the structure‑just add charges. If you need to revert the drawing palette to the original state, select the More menu, then select Reset Drawing.
The net formal charge on the given species ([tex]ClO_4[/tex]) is -1. From the diagram we can see that each oxygen atom has 3 pair of electrons and remaining are shared with the chlorine atom.
A charged species is a species that has an unequal number of protons and electrons, resulting in an overall charge. Examples of charged species include ions, radicals, and polar molecules. Ions are atoms or molecules that have gained or lost one or more electrons, resulting in a net charge while radicals are molecules or ions with an unpaired electron, resulting in a net charge.
Formal charge is calculated as = total number of valence electrons in free atom - number of non-bonding electrons - 1/2 (number of bonding electrons).
Free atom is chlorine with 7 valence electrons.
Oxygen has 8 electrons which are in pairs so, non-bonding electrons = 0
Number of bonding electrons = 14
formal charge on chlorine = 7 - 0 - 1/2(14) = 0
Formal charge on three oxygen atoms = 6 - 4 - 1/2(4) = 0
Formal charge on fourth oxygen atom = 6 - 6 - 1/2(2) = -1
net charge = 0 + 0 + (-1) = -1
To learn more about formal charge click here https://brainly.com/question/11723212
#SPJ1
why do you think asteroids are located in the asteroid belt?
Answer:
the asteroid belt is created by asteroids, and the belt is made because of the planets gravitational pull
Explanation:
:3
*I’m confused? Pls help, it’s due tmr*
Modeling Tool: Two Samples at the Atomic Scale
Goal: Create a model that represents a repeating group of atoms that could make up sample 2.
Based on the given information, it seems like we need help with creating a model of a repeating group of atoms for sample 2 using an atomic scale modeling tool. Here's an answer that includes the terms:
To create a model that represents a repeating group of atoms for sample 2, you should use the modeling tool at the atomic scale. Start by identifying the elements and their arrangement within the sample. Once you have this information, construct the repeating unit of atoms in the modeling tool, ensuring you accurately represent the positions, types, and bonding of the atoms involved. This model will help you visualize and better understand the structure of sample 2 at the atomic level.
For more questions on: scale
https://brainly.com/question/28571689
#SPJ11
Using a spatula and a balance, measure 2.50 g copper(II) chloride (CuCl). You may need to add and subtract to get exactly 2.50 g.
Intro
To measure 2.50 g of copper(II) chloride using a spatula and a balance, start by placing the spatula on the balance and tare it to zero.
Next, scoop up some copper(II) chloride onto the spatula and use the balance to measure the weight.If the amount is less than 2.50 g, use the spatula to add a small amount of powder until the balance reads 2.50 g. Continue this process until the balance reads exactly 2.50 g. Finally, use the balance to adjust the weight until it is exactly 2.50 g. Once the desired weight is achieved, carefully remove the copper(II) chloride from the spatula and store it accordingly.
learn more about spatula refer:brainly.com/question/22596862
#SPJ1
What is the connection between the Observation and Question steps of the scientific method?
Observation and questioning are the two initial steps of the scientific method, and they are closely connected. Observation refers to gathering information and data about a natural phenomenon or a specific problem, while questioning refers to developing an inquiry about what has been observed.
In other words, observation leads to questioning because as scientists observe something, they notice patterns, relationships, and discrepancies that raise questions about what is happening and why. These questions then serve as a guide for further investigation and experimentation, leading to the development of hypotheses and theories.
Furthermore, the quality of the observation directly influences the type of questions that can be formulated. A more precise and accurate observation will lead to more focused and specific questions, while vague observations can lead to ambiguous and unclear questions.
In summary, the observation and questioning steps of the scientific method are interconnected and essential for the development of scientific knowledge. Accurate and detailed observations lead to well-formulated questions that guide scientific inquiry and experimentation, leading to the development of hypotheses and theories.
To know more about please refer:
https://brainly.com/question/28887642
#SPJ1
In the scientific method, the Observation phase leads to careful observations about a trend, pattern, or phenomenon, which then sparks curiosity in the Question phase. The connection is that observations help formulate specific, research-oriented questions, which then guide the next steps of the scientific investigation.
Explanation:The Observation and Question steps are crucial phases in the scientific method, being interconnected in meaningful ways. In the Observation phase, a scientist makes careful, detail-oriented observations about the world or specifically focused aspect(s). These observations could be about a trend, a pattern, or any interesting phenomenon.
These observations lead to the Question step. After identifying a particular trend or pattern during the Observations step, a scientist becomes curious and asks a question about why or how something happens. It's through these observations that scientists come up with specific, research-oriented questions, setting the stage for the formulation of a hypothesis and further experimentation. In other words, the questions that drive the scientific investigation are based on initial observations. So, we can say the connection between the Observation and Question steps of the scientific method is that observations spark curiosity and lead to questions, while questions in turn guide the future research direction.
Learn more about Scientific Method here:https://brainly.com/question/37065071
#SPJ12
how many grams of no gas are there in a 5.00-l cylinder at 4.00 × 103 mm hg and 23°c
There are 32.1 grams of NO gas in the cylinder if a 5.00-l cylinder at 4.00 × 103 mm hg and 23°c.
To determine the number of grams of NO gas in a 5.00 L cylinder at [tex]4.00 × 10^3[/tex] mmHg and 23°C, we can use the ideal gas law:
PV = nRT
where P is the pressure, V is the volume, n is the number of moles of gas, R is the gas constant, and T is the temperature in Kelvin.
First, we need to convert the pressure to atmospheres and the temperature to Kelvin:
4.00 × [tex]10^3[/tex] mmHg = 5.26 atm (1 atm = 760 mmHg)
23°C = 296 K
Now we can rearrange the ideal gas law to solve for n:
n = PV/RT
n = (5.26 atm)(5.00 L)/(0.0821 L·atm/mol·K)(296 K) = 1.07 mol
Finally, we can convert from moles to grams using the molar mass of NO:
1.07 mol NO × 30.01 g/mol = 32.1 g NO
Therefore, there are 32.1 grams of NO gas in the cylinder.
Learn more about ideal gas law here
https://brainly.com/question/28257995
#SPJ1
ASAP PLEASE!!!2. Evidence: Use the Element symbol provided to create a Bohr/ Orbital Model for
each. Use the PhET simulation to work through each. Complete the table below.
Include a picture of each that you either snip from the simulation or draw. Include the
I
Physical Science B 11-1C Lab Periodic Trends
information to complete the last 3 columns. Use the simulation for subatomic particles
and location. Use the periodic table to determine if it is a metal, nonmetal or metalloid.
The highlighted boxes have been done for you as examples.
(4 points)
Metals are typically solid at room temperature, have a shiny or metallic appearance, are good conductors of heat and electricity, and are malleable and ductile.
Nonmetals, on the other hand, can exist in all three states of matter at room temperature, are generally not shiny, and are poor conductors of heat and electricity. They tend to be brittle and cannot be easily drawn into wires or hammered into thin sheets.
Metalloids have properties that fall somewhere between those of metals and nonmetals. They may have a shiny or dull appearance, and their ability to conduct heat and electricity is generally between that of metals and nonmetals.
The position of an element in the periodic table can give you some clues about its classification. Metals are typically found on the left side and middle of the periodic table, nonmetals are found on the right side, and metalloids are located along the "stair-step" line that separates the metals and nonmetals.
Learn more about periodic table:https://brainly.com/question/11155928
#SPJ1